Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
Revised May 2003
74LCX2244
Low Voltage Buffer/Line Driver with 5V Tolerant Inputs
and Outputs with 26Ω Series Resistors in the Outputs
General Description
Features
The LCX2244 contains eight non-inverting buffers with
3-STATE outputs. The device may be employed as a memory address driver, clock driver and bus-oriented transmitter/receiver. The LCX2244 is designed for low voltage
(2.5V or 3.3V) VCC applications with capability of interfacing to a 5V signal environment. The 26Ω series resistors
help reduce output overshoot and undershoot.
■ 5V tolerant inputs and outputs
The LCX2244 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining
CMOS low power dissipation.
■ 2.3V to 3.6V VCC specifications provided
■ 7.5 ns tPD max (VCC = 3.3V) 10 µA ICC max
■ Power down high impedance inputs and outputs
■ 26Ω-series resistors in the outputs
■ Supports live insertion/withdrawal (Note 1)
■ ±12 mA output drive (VCC = 3.0V)
■ Implements patented noise/EMI reduction circuitry
■ Latch-up performance exceeds 500 mA
■ ESD performance:
Human body model > 2000V
Machine model > 200V
■ Leadless DQFN package
Note 1: To ensure the high-impedance state during power up or down, OE
should be tied to VCC through a pull-up resistor: the minimum value or the
resistor is determined by the current-sourcing capability of the driver.
Ordering Code:
Order Number
Package
Number
Package Description
74LCX2244WM
M20B
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
74LCX2244SJ
M20D
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74LCX2244BQ
(Preliminary)
MLP020B
(Preliminary)
20-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241,
2.5 x 4.5mm
74LCX2244MSA
MSA20
20-Lead Shrink Small Outline Package (SSOP), JEDEC MO-150, 5.3mm Wide
74LCX2244MTC
MTC20
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
© 2003 Fairchild Semiconductor Corporation
DS012569
www.fairchildsemi.com
74LCX2244 Low Voltage Buffer/Line Driver with 5V Tolerant Inputs and Outputs with 26Ω Series Resistors in the
Outputs
October 1995
74LCX2244
Logic Symbol
Pin Descriptions
IEEE/IEC
Pin Names
Description
OE1, OE2
3-STATE Output Enable Inputs
I0–I7
Inputs
O0–O7
Outputs
Truth Tables
Inputs
OE1
Connection Diagrams
Pin Assignments for
SOIC, SOP, SSOP, and TSSOP
In
L
L
L
H
H
H
X
Z
In
(Pins 3, 5, 7, 9)
Inputs
OE2
Pad Assignment for DQFN
(Top Through View)
2
(Pins 12, 14, 16, 18)
L
Outputs
L
L
L
L
H
H
H
X
Z
H = HIGH Voltage Level
X = Immaterial
L = LOW Voltage Level
Z = High Impedance
www.fairchildsemi.com
Outputs
Symbol
Parameter
Value
Conditions
VCC
Supply Voltage
−0.5 to +7.0
VI
DC Input Voltage
−0.5 to +7.0
VO
DC Output Voltage
−0.5 to +7.0
Units
V
V
Output in 3-STATE
−0.5 to VCC + 0.5
V
Output in HIGH or LOW State (Note 3)
IIK
DC Input Diode Current
−50
VI < GND
IOK
DC Output Diode Current
−50
VO < GND
+50
VO > VCC
mA
mA
IO
DC Output Source/Sink Current
±50
mA
ICC
DC Supply Current per Supply Pin
±100
mA
IGND
DC Ground Current per Ground Pin
±100
mA
TSTG
Storage Temperature
−65 to +150
°C
Recommended Operating Conditions (Note 4)
Symbol
VCC
Parameter
VI
Input Voltage
VO
Output Voltage
IOH/IOL
Min
Max
Operating
2.0
3.6
Data Retention
1.5
3.6
Supply Voltage
0.0
5.5
HIGH or LOW State
0.0
VCC
3-STATE
0.0
5.5
Output Current
TA
Free-Air Operating Temperature
∆t/∆V
Input Edge Rate, VIN = 0.8V − 2.0V, VCC = 3.0V
Units
V
V
V
VCC = 3.0V − 3.6V
±12.0
VCC = 2.7V − 3.0V
±8.0
VCC = 2.3V − 2.7V
±4.0
mA
−40.0
85.0
°C
0.0
10.0
ns/V
Note 2: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated
at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation.
Note 3: IO Absolute Maximum Rating must be observed.
Note 4: Unused inputs must be held HIGH or LOW. They may not float.
DC Electrical Characteristics
Symbol
VIH
VIL
VOH
VOL
Parameter
Conditions
HIGH Level Input Voltage
LOW Level Input Voltage
HIGH Level Output Voltage
LOW Level Output Voltage
IOH = −100 µA
VCC
TA = −40°C to +85°C
(V)
Min
2.3 − 2.7
1.7
2.7 − 3.6
2.0
Max
V
2.3 − 2.7
0.7
2.7 − 3.6
0.8
2.3 − 3.6
VCC − 0.2
IOH = −4 mA
2.3
1.8
IOH = −4 mA
2.7
2.2
IOH = −6 mA
3.0
2.4
IOH = − 8mA
2.7
2.0
IOH = −12 mA
3.0
2.0
IOL = 100 µA
2.3 − 3.6
0.2
IOL = 4 mA
2.3
0.6
IOL = 4 mA
2.7
0.4
IOL = 6 mA
3.0
0.55
2.7
0.6
IOL = 12 mA
3.0
0.8
II
Input Leakage Current
0 ≤ VI ≤ 5.5V
2.3 − 3.6
±5.0
IOZ
3-STATE Output Leakage
0 ≤ VO ≤ 5.5V
2.3 − 3.6
±5.0
3
V
V
IOL = 8 mA
VI = V IH or VIL
Units
V
µA
µA
www.fairchildsemi.com
74LCX2244
Absolute Maximum Ratings(Note 2)
74LCX2244
DC Electrical Characteristics
Symbol
Parameter
(Continued)
VCC
Conditions
TA = −40°C to +85°C
(V)
Min
IOFF
Power-Off Leakage Current
VI or VO = 5.5V
0.0
10.0
ICC
Quiescent Supply Current
VI = VCC or GND
2.3 − 3.6
10.0
3.6V ≤ VI, VO ≤ 5.5V (Note 5)
2.3 − 3.6
±10.0
VIH = VCC − 0.6V
2.3 − 3.6
500
∆ICC
Increase in ICC per Input
Units
Max
µA
µA
µA
Note 5: Outputs disabled or 3-STATE only.
AC Electrical Characteristics
TA = −40°C to +85°C, RL = 500Ω
Symbol
Parameter
VCC = 3.3V ± 0.3V
VCC = 2.7V
VCC = 2.5 ± 0.2V
CL = 50pF
CL = 50pF
CL = 30pF
Min
Max
Min
Max
Min
tPHL
Propagation Delay
1.5
7.5
1.5
8.5
1.5
9.0
tPLH
Data to Output
1.5
7.5
1.5
8.5
1.5
9.0
tPZL
Output Enable Time
1.5
9.0
1.5
10.0
1.5
10.5
1.5
9.0
1.5
10.0
1.5
10.5
tPZH
tPLZ
Output Disable Time
tPHZ
tOSHL
Max
1.5
7.0
1.5
8.0
1.5
8.4
1.5
7.0
1.5
8.0
1.5
8.4
Output to Output Skew (Note 6)
1.0
tOSLH
Units
ns
ns
ns
ns
1.0
Note 6: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The
specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH).
Dynamic Switching Characteristics
Symbol
VOLP
VOLV
Parameter
Quiet Output Dynamic Peak VOL
Quiet Output Dynamic Valley VOL
VCC
TA = 25°C
(V)
Typical
CL = 50 pF, VIH = 3.3V, VIL = 0V
3.3
0.35
CL = 30 pF, VIH = 2.5V, VIL = 0V
2.5
0.25
CL = 50 pF, VIH = 3.3V, VIL = 0V
3.3
−0.35
CL = 30 pF, VIH = 2.5V, VIL = 0V
2.5
−0.25
Conditions
Units
V
V
Capacitance
Typical
Units
CIN
Symbol
Input Capacitance
Parameter
VCC = Open, VI = 0V or VCC
7.0
pF
COUT
Output Capacitance
VCC = 3.3V, VI = 0V or VCC
8.0
pF
CPD
Power Dissipation Capacitance
VCC = 3.3V, VI = 0V or VCC, f = 10 MHz
25.0
pF
www.fairchildsemi.com
Conditions
4
74LCX2244
AC LOADING and WAVEFORMS Generic for LCX Family
FIGURE 1. AC Test Circuit (CL includes probe and jig capacitance)
Test
Switch
tPLH, tPHL
Open
tPZL, tPLZ
6V at VCC = 3.3 ± 0.3V
VCC x 2 at VCC = 2.5 ± 0.2V
tPZH,tPHZ
GND
Waveform for Inverting and Non-Inverting Functions
3-STATE Output High Enable and
Disable Times for Logic
Propagation Delay. Pulse Width and trec Waveforms
Setup Time, Hold Time and Recovery Time for Logic
trise and tfall
3-STATE Output Low Enable and
Disable Times for Logic
FIGURE 2. Waveforms
(Input Characteristics; f =1MHz, tr = tf = 3ns)
Symbol
VCC
3.3V ± 0.3V
2.7V
2.5V ± 0.2V
Vmi
1.5V
1.5V
VCC/2
Vmo
1.5V
1.5V
VCC/2
Vx
VOL + 0.3V
VOL + 0.3V
VOL + 0.15V
Vy
VOH − 0.3V
VOH − 0.3V
VOH − 0.15V
5
www.fairchildsemi.com
74LCX2244
Schematic Diagram Generic for LCX Family
www.fairchildsemi.com
6
74LCX2244
Physical Dimensions inches (millimeters) unless otherwise noted
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
Package Number M20B
7
www.fairchildsemi.com
74LCX2244
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M20D
www.fairchildsemi.com
8
74LCX2244
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 4.5mm
Package Number MLP020B
(Preliminary)
9
www.fairchildsemi.com
74LCX2244
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Shrink Small Outline Package (SSOP), JEDEC MO-150, 5.3mm Wide
Package Number MSA20
www.fairchildsemi.com
10
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC20
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
11
www.fairchildsemi.com
74LCX2244 Low Voltage Buffer/Line Driver with 5V Tolerant Inputs and Outputs with 26Ω Series Resistors in the
Outputs
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com