P16E.pdf
Oct.1,2018
Ceramic Resonators
(CERALOCKr)
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EU RoHS Compliant
• All the products in this catalog comply
with EU RoHS.
• EU RoHS is "the European Directive
2011/65/EU on the Restriction of the
Use of Certain Hazardous Substances in
Electrical and Electronic Equipment."
• For more details, please refer to our web
page, "Murata's Approach for EU RoHS"
(https://www.murata.com/en-eu/support/
compliance/rohs).
P16E.pdf
Oct.1,2018
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2018
1
Contents
Product specifications are as of October 2018.
CERALOCKr, CERALOCK(R) and "CERALOCK"
in this catalog are the trademarks of
Murata Manufacturing Co., Ltd.
Selection Guide
p2
Part Numbering
p3
2
1 MHz Chip Type -Tight Frequency
Tolerance for Automotive
p4
3
2 MHz Chip Type -Standard Frequency
Tolerance for Automotive
Notice for Automotive
Packaging for Automotive
p6
p8
p11
4
3 MHz Chip Type
-Tight Frequency Tolerance
for Consumer/Industrial Usage
p13
5
4 MHz Chip Type
-Standard Frequency Tolerance
for Consumer/Industrial Usage
p15
5 MHz Lead Type
-Standard Frequency Tolerance
for Consumer/Industrial Usage
p17
Notice for Consumer/Industrial Usage
MHz Chip Type
p19
MHz Lead Type
p21
Packaging for Consumer/Industrial Usage
MHz Chip Type
p22
MHz Lead Type
p24
Please check the MURATA website (https://www.murata.com/)
if you cannot find a part number in this catalog.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Selection Guide
Applications
Automotive
Consumer/Industrial
Tight Tolerance
Standard Tolerance
Tight Tolerance
Standard Tolerance
SMD
SMD
SMD
SMD
CSTNR_GH5C
CSTCR_G_B
CSTNR_GH5L
CSTCR_G
4.00–7.99MHz
4.00–7.99MHz
4.00–7.99MHz
4.00–7.99MHz
CSTNE_GH5C
CSTNE_G_A
CSTCE_G_A
CSTNE_GH5L
CSTNE_G
CSTCE_G
8.00–13.99MHz
CSTNE_VH3C
14.00–20.00MHz
8.00–13.99MHz
CSTNE_V_C
CSTCE_V_C
14.00–20.00MHz
8.00–13.99MHz
CSTNE_VH3L
14.00–20.00MHz
8.00–13.99MHz
CSTNE_V
CSTCE_V
14.00–20.00MHz
Leaded
CSTLS_G
3.40–10.00MHz
CSTLS_X
16.00–70.00MHz
Notice: "CERALOCKr for consumer" and "CERALOCKr for automotive" is different in the specification of Operating Temperature Range, Environmental Characteristics,
Physical Characteristics and so on. Please choose either "for consumer" or "for automotive" according to the required specification.
2
P16E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P16E.pdf
Oct.1,2018
o Part Numbering
CERALOCKr (MHz)
(Part Number)
CS
T
NE 16M0 V
1
2
3
4
5
3 **** R0
5 6 7
8
9
7Load Capacity
1Product ID
Product ID
Code
CS
Ceramic Resonators
2Frequency/Capacitance
Load Capacity
1
5pF
2
10pF
3
15pF
Code
Frequency/Capacitance
5
33/39pF
T
MHz with Built-in Capacitance
6
47pF
8Individual Specification
3Structure/Size
Code
Structure/Size
LS
Round Lead Type
CR/NR/CE/NE
Small-cap Chip Type
Code
****
Individual Specification
Four-digit alphanumerics express
"Individual Specification."
With standard products, "8Individual Specification" and "9Packaging"
is omitted.
4Nominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Decimal point is expressed by capital letter "M."
9Packaging
Code
5Design
Packaging
B0
Bulk
Code
Design
A0
Radial Taping H0=18mm
G
Thickness Shear mode
R0
Plastic Taping ø=180mm Reel
R1
Plastic Taping ø=330mm Reel
V
Thickness Expander mode
X
Thickness Expander mode (3rd overtone)
F"'*2.',%'1..*'#"2-*#"27.#,".*12'!2.',%2-!&'.27.#@
6Initial Frequency Tolerance
Code
Initial Frequency Tolerance
5
±0.5%
3
±0.3%
2
±0.2%
H
±0.07%
3
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Oct.1,2018
Ceramic Resonators (CERALOCKr)
MHz Chip Type -Tight Frequency Tolerance for Automotive
1.1±0.1
4.1 max.
0.4 (Ref.)
0.4 (Ref.)
0.4 (Ref.)
(3)
(2)
0.4±0.1
(1)
0.4±0.1
CSTNR_GH5C
4.00-7.99MHz
0.75±0.1
1. High accuracy resonators whose total tolerance is
available for less than ±3,000ppm.
2. High reliability and available for a wide temperature range.
3. Oscillation circuits do not require external load capacitors.
4. Available for a wide frequency range.
5. Extremely small and have a low profile.
6. No adjustment is necessary for oscillation circuits.
7. Stable supply is ensured due to not using precious metal
(Paradium) in built-in Capacitance.
1.5±0.1
0.4±0.1 (1): Input
(2): GND
(3): Output
: Frequency Marking
* : EIAJ Monthly Code
1.5±0.1
(in mm)
*
1.1 max.
1.30±0.15
0.10±0.10
3.20±0.15
0.4±0.1
0.1±0.1
3.0 max.
0.50 (ref.)
0.50 (ref.)
0.50 (ref.)
(3)
(2)
(1)
0.4±0.1 0.4±0.1 0.4±0.1
(1): Input
(2): GND
(3): Output
: Frequency Marking
* : EIAJ Monthly Code
CSTNE_GH5C
8.00-13.99MHz
0.4±0.1
1. Cluster panel and Control panel
2. Safety control
Anti-lock Brake System, Electronic Stability Control,
Airbag, etc.
3. Engine ECU, Electronic Power Steering, Immobilizer, etc.
4. Car Air conditioner, Power Window,
Remote Keyless Entry system, etc.
5. Intelligent Transportation System
Lane Keeping System, Millimeter wave radar, etc.
6. Battery control for hybrid cars
1.2±0.1 1.2±0.1
1.1 max.
*
0.4±0.1
0.1±0.1
3.0 max.
0.50 (ref.)
0.50 (ref.)
0.50 (ref.)
(3)
(2)
(1)
0.4±0.1 0.4±0.1 0.4±0.1
0.4±0.1
Initial
Frequency Tolerance
(%)
1.30±0.15
0.10±0.10
3.20±0.15
CSTNE_VH3C
14.00-20.00MHz
Frequency
(MHz)
(in mm)
0.90±0.10
Applications
(1): Input
(2): GND
(3): Output
: Frequency Marking
* : EIAJ Monthly Code
1.2±0.1 1.2±0.1
(in mm)
Frequency Shift by Temperature
(%)
Operating
Temperature Range
(°C)
CSTNR_GH5C
4.00 to 7.99
±0.07
±0.13
-40 to 125
CSTNE_GH5C
8.00 to 13.99
±0.07
±0.13
-40 to 125
CSTNE_VH3C
14.00 to 20.00
±0.07
±0.13
-40 to 125
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
4
1.4 max.
0.6±0.05
0.2±0.2
Features
Part Number
2.0±0.1
*
0.70±0.10
Chip type CERALOCKr with built-in load capacitors
provides high accuracy in an extremely small package.
MURATA's frequency adjustment and package technology
expertise has enabled the development of the chip
CERALOCKr with built-in load capacitors.
This diverse series owes its development to MURATA's
original mass production techniques and high reliability,
and has achieved importance in the worldwide automotive
market.
0.30±0.20
4.5±0.1
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2018
Measuring Circuit of Oscillating Frequency
1
VDD
5pF
To Frequency Counter
Rf
1MΩ
Rd
(1)
(3)
C1
C2
(2)
Standard Land Pattern Dimensions
CSTNR_GH5C
(* This Land Pattern is not common to CSTCR_G.)
0.4
1.1
0.4
1.1
CSTNE_GH5C/CSTNE_VH3C
0.4
0.8
0.4
0.8
0.4
1.9
2.6
0.4
1.2
1.5
1.5
1.2
Land Pattern
Land Pattern
(in mm)
(in mm)
Frequency Temperature Characteristics
CSTNR_GH5C
CSTNE_GH5C
+0.2
Oscillating Frequency Shift (%)
Oscillating Frequency Shift (%)
+0.2
+0.1
+0.1
0
-0.1
-0.2
-60
-40
-20
0
+20 +40 +60
Temperature (°C)
+80 +100 +120 +140
0
-0.1
-0.2
-60
-40
-20
0
+20 +40 +60
Temperature (°C)
+80 +100 +120 +140
CSTNE_VH3C
Oscillating Frequency Shift (%)
+0.2
+0.1
0
-0.1
-0.2
-60
-40
-20
0
+20 +40 +60
Temperature (°C)
+80 +100 +120 +140
5
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2018
Ceramic Resonators (CERALOCKr)
MHz Chip Type -Standard Frequency Tolerance for Automotive
(3)
0.2±0.2
(2)
0.4±0.05
(1)
4.1 max.
0.4 (Ref.) 0.4 (Ref.) 0.4 (Ref.)
0.8±0.1
CSTCR_G_B
4.00-7.99MHz
0.8±0.1
0.8±0.1
0.4±0.1
0.4±0.1
0.75±0.1
1.5±0.1
1.4 max.
2.0±0.1
*
1.15±0.05
2
Chip type CERALOCKr with built-in load capacitors
provides high accuracy in an extremely small package.
MURATA's frequency adjustment and package technology
expertise has enabled the development of the chip
CERALOCKr with built-in load capacitors.
This diverse series owes its development to MURATA's
original mass production techniques and high reliability,
and has achieved importance in the worldwide automotive
market.
0.3±0.2
4.5±0.1
(1): Input
(2): GND
(3): Output
: Frequency Marking
* : EIAJ Monthly Code
0.4±0.1
1.5±0.1
(in mm)
Features
1. High reliability and available for a wide temperature range.
2. Oscillation circuits do not require external load capacitors.
3. Available for a wide frequency range.
4. Extremely small and have a low profile.
5. No adjustment is necessary for oscillation circuits.
*
1.1 max.
1.30±0.15
0.10±0.10
3.20±0.15
0.4±0.1
0.1±0.1
Applications
0.70±0.10
3.0 max.
0.50 (ref.)
0.50 (ref.)
0.50 (ref.)
(3)
(2)
(1)
0.4±0.1 0.4±0.1 0.4±0.1
(1): Input
(2): GND
(3): Output
: Frequency Marking
* : EIAJ Monthly Code
CSTNE_G_A
8.00-13.99MHz
0.4±0.1
1.2±0.1 1.2±0.1
(in mm)
*
1.1 max.
1.30±0.15
3.20±0.15
0.10±0.10
1. Cluster panel and Control panel
2. Safety control
Anti-lock Brake System, Electronic Stability Control,
Airbag, etc.
3. Engine ECU, Electronic Power Steering, Immobilizer, etc.
4. Car Air conditioner, Power Window,
Remote Keyless Entry system, etc.
5. Electronic Toll Collection system, Car Navigation, etc.
0.4±0.1
0.1±0.1
0.50 (ref.)
0.90±0.10
3.0 max.
0.50 (ref.)
0.50 (ref.)
(3)
(2)
(1)
0.4±0.1 0.4±0.1 0.4±0.1
CSTNE_V_C
14.00-20.00MHz
0.4±0.1
1.2±0.1 1.2±0.1
(in mm)
Frequency
(MHz)
Initial
Frequency Tolerance
(%)
Frequency Shift by Temperature
(%)
Operating
Temperature Range
(°C)
CSTCR_G_B
4.00 to 7.99
±0.50
±0.15
-40 to 125
CSTNE_G_A
8.00 to 13.99
±0.50
±0.20
-40 to 125
CSTNE_V_C
14.00 to 20.00
±0.50
±0.15
-40 to 125
Part Number
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
6
(1): Input
(2): GND
(3): Output
: Frequency Marking
* : EIAJ Monthly Code
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2018
Measuring Circuit of Oscillating Frequency
CSTNE_G_A/CSTNE_V_C/CSTCR_G_B
VDD
5pF
To Frequency Counter
Rf
1MΩ
Rd
(1)
2
(3)
C1
C2
(2)
Standard Land Pattern Dimensions
CSTCR_G_B
CSTNE_G_A/CSTNE_V_C
0.8 0.7 0.8 0.7 0.8
0.8
0.4
0.8
0.4
1.9
2.6
1.6
0.4
0.4
1.5
0.4
1.5
0.4
1.2
1.2
Land Pattern
Land Pattern
(in mm)
(in mm)
Frequency Temperature Characteristics
CSTCR_G_B
CSTNE_G_A
+0.2
Oscillating Frequency Shift (%)
Oscillating Frequency Shift (%)
+0.2
+0.1
+0.1
0
-0.1
-0.2
-60
-40
-20
0
+20 +40 +60
Temperature (°C)
+80 +100 +120 +140
0
-0.1
-0.2
-60
-40
-20
0
+20 +40 +60
Temperature (°C)
+80 +100 +120 +140
CSTNE_V_C
Oscillating Frequency Shift (%)
+0.2
+0.1
0
-0.1
-0.2
-60
-40
-20
0
+20 +40 +60
Temperature (°C)
+80 +100 +120 +140
7
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2018
Notice for Automotive
Soldering and Mounting (CSTCR_G_B/CSTNR_GH5C, CSTNE_G_A/GH5C, CSTNE_V_C/VH3C Series)
1. Soldering
(1) Reflow soldering
Please mount the component on a circuit board by reflow
soldering. Flow soldering is not acceptable.
Recommendable Flux and Solder
Please use rosin based flux,
not water soluble flux.
Solder
Please use solder (Sn-3.0Ag-0.5Cu) under
the following conditions: Standard thickness
of soldering paste: 0.10 to 0.15mm.
Recommendable Soldering Profile
Pre-heating
60 to 120s
220°C min.
30 to 60s
upper limit: 260°C
1s max.
lower limit: 245°C
5s max.
Heating
Peak Temperature
150 to 180°C
Peak
Temperature (°C)
Flux
260
245
220
Heating
(220°C min.)
180
150
Pre-heating
(150 to 180°C)
60 to 120s
Gradual
Cooling
30 to 60s
Temperature shall be measured on the surface of component.
(2) Soldering with Iron
If compelled to mount the component by using a
soldering iron, please do not directly touch the
component with the soldering iron. The component
terminals or electrical characteristics may be damaged if
excessive thermal stress is applied.
Recommendable Soldering with Iron
Heating of the soldering iron
Watt
Shape of the soldering iron
Soldering Time
Solder
350°C max.
30W max.
ø3mm max.
5s max. at one terminal
Sn-3.0Ag-0.5Cu
(3) Solder Volume
Please make the solder volume less than the height of
the substrate to avoid damage to the seal between the
metal cap and the substrate.
(4) Other
Do not reuse components removed from a circuit board
after soldering.
(5) Conditions for Placement Machines
The component is recommended with placement
machines that employ optical placement capabilities.
The component may be damaged by excessive
mechanical force. Please make sure that you have
evaluated by using placement machines before going into
mass production. Do not use placement machines that
utilize mechanical positioning. Please contact Murata for
details beforehand.
Continued on the following page.
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P16E.pdf
Oct.1,2018
Notice for Automotive
Continued from the preceding page.
2. Wash
(1) Cleaning Solvents
HCFC, Isopropanol, Tap water, Demineralized water,
Cleanthrough750H, Pine alpha 100S, Techno care FRW
(2) Temperature Difference : dT *1
dT<
=60°C (dT=Component-solvent)
*1 ex. If the component is immersed at +90°C into
cleaning solvent at +60°C, then dT=30°C.
(3) Conditions
(a) Ultrasonic Wash
1 minute max. in above solvent at +60°C max.
(Frequency: 28kHz, Output: 20W/l)
(b) Immersion Wash
5 minutes max. in above solvent at +60°C max.
(c) Shower or Rinse Wash
5 minutes max. in above solvent at +60°C max.
(4) Drying
5 minutes max. by blowing air at +80°C max.
(5) Other
(a) Total washing time should be within 10 minutes.
(b) The component may be damaged if it is washed with
chlorine, petroleum, or alkali cleaning solvent.
3. Coating
Conformal coating of the component is acceptable.
However, the resin material, curing temperature, and
other process conditions should be evaluated to confirm
stable electrical characteristics are maintained.
Continued on the following page.
9
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice for Automotive
Continued from the preceding page.
Storage and Operating Conditions
1. Product Storage Conditions
Please store the products in a room where the
temperature/humidity is stable, and avoid
places where there are large temperature changes.
Please store the products under the following
conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six
months after delivery under the conditions of a
sealed and unopened package. Please use the products
within six months after delivery. If you store the
products for a long time (more than six months),
use carefully because the products may be degraded
in solderability and/or rusty.
Please confirm solderability and characteristics
for the products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage in a chemical
atmosphere.
Rating
The component may be damaged if excessive mechanical
stress is applied.
Handling
"CERALOCK" may stop oscillating or oscillate
irregularly under improper circuit conditions.
10
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
and/or dusty places.
(3) Please do not store the products in places
such as: in a damp heated place, in a place where
direct sunlight comes in, in a place applying
vibrations.
(4) Please use the products immediately after the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage under poor
conditions.
(5) Please do not drop the products to avoid cracking
of ceramic elements.
4. Other
Conformal coating of the component is acceptable.
However, the resin material, curing temperature, and
other process conditions should be evaluated to
confirm that stable electrical characteristics are
maintained.
Please be sure to consult with our sales representatives
or engineers whenever and prior to using the products.
P16E.pdf
Oct.1,2018
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2018
Packaging for Automotive
Minimum Quantity
Bulk
Reel Dimensions
CSTCR_G_B
Part Number
Plastic Tape ø180mm
3,000
Plastic Tape ø330mm
9,000
500
a
CSTNR_GH5C
3,000
9,000
500
a
CSTNE_G_A
3,000
9,000
500
b
CSTNE_GH5C
3,000
9,000
500
b
CSTNE_V_C
3,000
9,000
500
b
CSTNE_VH3C
3,000
9,000
500
b
(pcs.)
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
Dimensions of Reel
a
b
Trailer
160-190
Leader
Empty Components
Empty Components
Empty
160 min.
(ø1800
–1.5)
(ø1800
–1.5)
400-560
ø13.0±0.2
2.0±0.5
13.0
Leader
Cover Film
Trailer
160-190
Cover Film
+1.0
0
9.0
17.0±1.0
Empty
160 min.
400-560
ø13.0±0.2
2.0±0.5
+1.0
0
13.0±1.0
(in mm)
Dimensions of Taping
10°
(in mm)
Direction of Feed
8.0±0.2
3.5±0.05
+0.10
3.40 -0.05
(7˚)
(1.30 max.)
(1.85 max.)
0.25±0.05
1.25±0.1
Direction of Feed
(3)(2)(1)
(5.2)
+0.2
4.0±0.1
ø1.0 -0.0
+0.10
Cover film peel strength force 0.1 to 0.7N 1.50 -0.05
Cover film peel speed 300mm/min.
Cover Film
4.0±0.1
(5°)
+0.1
ø1.5 -0.0
2.0±0.05
0.25±0.05
0.90±0.10
ø1.5±0.1
2.2±0.1
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Cover Film
10°
4.0±0.1
12.0±0.2
(9.5)
(3)(2)(1)
4.7±0.1
2.0±0.05
5.5±0.05
+0.1
ø1.5 -0
1.75±0.1
CSTNE_GH5C
1.75±0.1
CSTNR_GH5C
4.0±0.1
(in mm)
8.0±0.2
+0.10
3.40 -0.05
(3)(2)(1)
Direction of Feed
1.10±0.10
(5°)
(1.40 max.)
+0.2
ø1.0 -0.0
+0.10
Cover film peel strength force 0.1 to 0.7N 1.50 -0.05
Cover film peel speed 300mm/min.
Cover Film
10°
0.25±0.05
(5.2)
4.0±0.1
3.5±0.05
1.75±0.1
CSTNE_VH3C
Dimensions of Carrier Tape
4.0±0.1
+0.1
ø1.5 -0.0
2.0±0.05
(in mm)
Continued on the following page.
11
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2018
Packaging for Automotive
Continued from the preceding page.
Dimensions of Taping
8.0±0.2
+0.10
3.40 -0.05
Direction of Feed
1.10±0.10
(1.40 max.)
(5°)
0.25±0.05
(5.2)
(3)(2)(1)
+0.2
ø1.0 -0.0
+0.10
Cover film peel strength force 0.1 to 0.7N 1.50 -0.05
Cover film peel speed 300mm/min.
Cover Film
10°
12
3.5±0.05
1.75±0.1
CSTNE_V_C
4.0±0.1
(in mm)
Direction of Feed
8.0±0.2
3.5±0.05
+0.10
3.40 -0.05
10°
(in mm)
Dimensions of Carrier Tape
4.0±0.1
+0.1
ø1.5 -0.0
2.0±0.05
(7˚)
(1.30 max.)
(1.85 max.)
0.3±0.05
1.25±0.05
Direction of Feed
(3)(2)(1)
(5.2)
+0.2
4.0±0.1
ø1.0 -0.0
+0.10
Cover film peel strength force 0.1 to 0.7N 1.50 -0.05
Cover film peel speed 300mm/min.
Cover Film
4.0±0.1
(3°)
+0.1
ø1.5 -0.0
2.0±0.05
0.25±0.05
0.90±0.10
+0.1
ø1.5 -0
2.2±0.1
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Cover Film
10°
4.0±0.1
12.0±0.2
(9.5)
(3)(2)(1)
4.7±0.1
2.0±0.05
5.5±0.05
+0.1
ø1.5 -0
1.75±0.1
CSTNE_G_A
1.75±0.1
CSTCR_G_B
4.0±0.1
(in mm)
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2018
Ceramic Resonators (CERALOCKr)
MHz Chip Type -Tight Frequency Tolerance for Consumer/Industrial Usage
2.0±0.1
0.30±0.20
Chip type CERALOCKr with built-in load capacitors
provides high accuracy in an extremely small package.
MURATA's frequency adjustment and packaging technology
expertise has enabled the development of the chip
CERALOCKr with built-in load capacitors.
High-density mounting is made possible by the small
package and the elimination of the need for an external
load capacitor.
*
0.6±0.05
0.2±0.2
1.1±0.1
4.1 max.
0.4 (Ref.)
0.4 (Ref.)
0.4 (Ref.)
(3)
(2)
0.4±0.1
(1)
0.4±0.1
CSTNR_GH5L
4.00-7.99MHz
0.75±0.1
1. Oscillation circuits do not require external load capacitors.
2. Available for a wide frequency range.
3. Extremely small and have a low profile.
4. No adjustment is necessary for oscillation circuits.
5. Stable supply is ensured due to not using precious metal
(Paradium) in built-in Capacitance.
1.5±0.1
0.4±0.1 (1): Input
(2): GND
(3): Output
: Frequency Marking
* : EIAJ Monthly Code
1.5±0.1
3
(in mm)
*
1.1 max.
1.30±0.15
0.10±0.10
3.20±0.15
0.4±0.1
0.1±0.1
3.0 max.
Applications
0.70±0.10
Features
1.4 max.
4.5±0.1
0.50 (ref.)
0.50 (ref.)
0.50 (ref.)
1. Clock oscillators for USB (full-speed) controller ICs
2. Audio equipment and musical instruments, etc.
3. Other applications for replacement of Crystal units/
Oscillators
(3)
(2)
(1)
0.4±0.1 0.4±0.1 0.4±0.1
(1): Input
(2): GND
(3): Output
: Frequency Marking
* : EIAJ Monthly Code
CSTNE_GH5L
8.00-13.99MHz
0.4±0.1
1.2±0.1 1.2±0.1
(in mm)
*
1.1 max.
1.30±0.15
0.10±0.10
3.20±0.15
0.4±0.1
0.1±0.1
0.90±0.10
3.0 max.
0.50 (ref.)
0.50 (ref.)
0.50 (ref.)
(3)
(2)
(1)
0.4±0.1 0.4±0.1 0.4±0.1
CSTNE_VH3L
14.00-20.00MHz
0.4±0.1
(1): Input
(2): GND
(3): Output
: Frequency Marking
* : EIAJ Monthly Code
1.2±0.1 1.2±0.1
(in mm)
Frequency
(MHz)
Initial
Frequency Tolerance
(%)
Frequency Shift by Temperature
(%)
Operating
Temperature Range
(°C)
CSTNR_GH5L
4.00 to 7.99
±0.07
±0.11
-20 to 85
CSTNE_GH5L
8.00 to 13.99
±0.07
±0.11
-40 to 85
CSTNE_VH3L
14.00 to 20.00
±0.07
±0.11
-40 to 85
Part Number
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
13
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2018
Measuring Circuit of Oscillating Frequency
CSTNR_GH5L/CSTNE_GH5L/CSTNE_VH3L
VDD
5pF
To Frequency Counter
Rf
1MΩ
Rd
(1)
(3)
C1
C2
(2)
3
Standard Land Pattern Dimensions
CSTNE_GH5L/CSTNE_VH3L
CSTNR_GH5L
(* This Land Pattern is not common to CSTCR_G.)
0.4
1.1
0.4
1.1
0.4
0.8
0.4
0.8
0.4
1.9
2.6
0.4
1.2
1.5
1.5
1.2
Land Pattern
Land Pattern
(in mm)
(in mm)
Frequency Temperature Characteristics
CSTNR_GH5L
CSTNE_GH5L
+0.2
Oscillating Frequency Shift (%)
Oscillating Frequency Shift (%)
+0.2
+0.1
+0.1
0
-0.1
-0.2
-60
-40
-20
0
+20 +40 +60
Temperature (°C)
+80 +100 +120 +140
CSTNE_VH3L
Oscillating Frequency Shift (%)
+0.2
+0.1
0
-0.1
-0.2
-60
14
-40
-20
0
+20 +40 +60
Temperature (°C)
+80 +100 +120 +140
0
-0.1
-0.2
-60
-40
-20
0
+20 +40 +60
Temperature (°C)
+80 +100 +120 +140
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2018
Ceramic Resonators (CERALOCKr)
MHz Chip Type -Standard Frequency Tolerance for Consumer/Industrial Usage
*
(3)
0.2±0.2
(2)
1.15±0.05
0.4 (Ref.) 0.4 (Ref.) 0.4 (Ref.)
0.8±0.1
0.8±0.1
0.8±0.1
0.4±0.1
0.4±0.1
0.75±0.1
1. Oscillation circuits do not require external load capacitors.
2. Available in a wide frequency range.
3. Extremely small and have a low profile.
4. No adjustment is necessary for oscillation circuits.
1.5±0.1
(1): Input
(2): GND
(3): Output
: Frequency Marking
* : EIAJ Monthly Code
0.4±0.1
1.5±0.1
(in mm)
*
1.1 max.
1.30±0.15
0.10±0.10
3.20±0.15
0.70±0.10
3.0 max.
0.50 (ref.)
0.50 (ref.)
0.50 (ref.)
(3)
(2)
(1)
0.4±0.1 0.4±0.1 0.4±0.1
(1): Input
(2): GND
(3): Output
: Frequency Marking
* : EIAJ Monthly Code
CSTNE_G
8.00-13.99MHz
0.4±0.1
1.2±0.1 1.2±0.1
(in mm)
*
1.1 max.
1.30±0.15
3.20±0.15
0.10±0.10
1. Clock oscillators for microprocessors
2. Small electronic equipment such as handheld phone,
digital video camcorder (DVC), digital still camera (DSC),
portable audio player, etc.
3. Storage media and memory (HDD, Optical storage device,
FDD, Flash memory card, etc.)
4. Office automation equipment (Mobile PC, Mouse,
Keyboard, etc.)
5. Audio-visual applications (TV, DVD-HDD recorder, Audio
equipment, Remote control, etc.)
6. Home appliances (Air conditioner, Microwave oven,
Refrigerator, Washing machine, etc.)
4
0.4±0.1
0.1±0.1
Applications
0.4±0.1
0.1±0.1
0.50 (ref.)
0.90±0.10
3.0 max.
0.50 (ref.)
0.50 (ref.)
(3)
(2)
(1)
0.4±0.1 0.4±0.1 0.4±0.1
CSTNE_V
14.00-20.00MHz
0.4±0.1
Part Number
0.4±0.05
(1)
4.1 max.
CSTCR_G
4.00-7.99MHz
Features
2.0±0.1
0.3±0.2
Chip type CERALOCKr with built-in load capacitors
provides an extremely small package.
MURATA's package technology expertise has enabled the
development of the Chip CERALOCKr with built-in
load capacitors.
High-density mounting can be realized because of the
small package and the elimination of the need for an
external load capacitor.
1.4 max.
4.5±0.1
(1): Input
(2): GND
(3): Output
: Frequency Marking
* : EIAJ Monthly Code
1.2±0.1 1.2±0.1
(in mm)
Frequency
(MHz)
Initial
Frequency Tolerance
(%)
Frequency Shift by Temperature
(%)
Operating
Temperature Range
(°C)
CSTCR_G
4.00 to 7.99
±0.50
±0.20
-20 to 80
CSTNE_G
8.00 to 13.99
±0.50
±0.20
-40 to 85
CSTNE_V
14.00 to 20.00
±0.50
±0.30
-40 to 85
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
15
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2018
Measuring Circuit of Oscillating Frequency
CSTCR_G/CSTNE_G/CSTNE_G_Z/CSTNE_V
VDD
5pF
To Frequency Counter
Rf
1MΩ
Rd
(1)
(3)
C1
C2
(2)
Standard Land Pattern Dimensions
CSTCR_G
(* This Land Pattern is not common to
CSTNR_GH5C, CSTNR_GH5L.)
CSTNE_G/CSTNE_V
0.8 0.7 0.8 0.7 0.8
0.8
0.4
0.8
0.4
2.6
1.6
0.4
1.9
4
0.4
1.5
0.4
1.5
0.4
1.2
1.2
Land Pattern
Land Pattern
(in mm)
(in mm)
Frequency Temperature Characteristics
CSTCR_G
CSTNE_G
+0.2
Oscillating Frequency Shift (%)
Oscillating Frequency Shift (%)
+0.2
+0.1
+0.1
0
-0.1
-0.2
-60
-40
-20
0
+20 +40 +60
Temperature (°C)
+80 +100 +120 +140
CSTNE_V
Oscillating Frequency Shift (%)
+0.2
+0.1
0
-0.1
-0.2
-60
16
-40
-20
0
+20 +40 +60
Temperature (°C)
+80 +100 +120 +140
0
-0.1
-0.2
-60
-40
-20
0
+20 +40 +60
Temperature (°C)
+80 +100 +120 +140
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2018
Ceramic Resonators (CERALOCKr)
MHz Lead Type -Standard Frequency Tolerance for Consumer/Industrial Usage
3.5±0.3
***
(3)
(2)
Features
(1)
Frequency
(MHz)
Part Number
T *1
5.5±1.0
3.5±0.3
6.5±0.5
*
(2)
(1)
2.5±0.2 2.5±0.2
Initial
Frequency Tolerance
(%)
Frequency Shift by Temperature
(%)
ø0.48±0.05
(3)
CSTLS_X
16.00-70.00MHz
1. DTMF generators
2. Clock oscillators for microcomputers
3. Remote control units
4. Automated office equipment
: Frequency Marking
: Vender’s Code
***: Weekly Date Code
(in mm)
2.5±0.2
2.5±0.2
1. Oscillation circuits do not require external load capacitors.
There is some variation in built-in capacitance values
applicable to various IC.
2. Stable over a wide temperature range.
3. Compact, lightweight and exhibit superior shock
resistance performance.
4. Enable the design of oscillator circuits requiring no
adjustment.
5. Cost-effective and reliable availability
ø0.48±0.05
7.0 (Ref.)
CSTLS_G
3.40-10.00MHz
Applications
5.5±0.5
3.0±1.0
0.7 (Ref.)
8.0±1.0
MURATA's ceramic resonator, CERALOCKr with built-in
load capacitors, has been widely applied as the most
suitable component for clock oscillators in a broad
range of microprocessors.
The CSTLS series can be used in the design of
oscillation circuits not requiring external load
capacitors, enabling both high-density mounting and
cost reduction.
T *1 : 3.5±1.0 (16.00–32.99MHz)
3.0±1.0 (33.00–70.00MHz)
: Frequency Marking
* : EIAJ Monthly Code
(in mm)
5
Operating
Temperature Range
(°C)
CSTLS_G
3.40 to 10.00
±0.5
±0.2 [-0.4% to +0.2%:Built-in Capacitance 47pF type]
-20 to 80
CSTLS_X
16.00 to 70.00
±0.5
±0.2
-20 to 80
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
The order quantity should be an integral multiple of the "Minimum Quantity" shown on the packaging page.
Measuring Circuit of Oscillating Frequency
32-bit Microcomputer
VDD
To Frequency Counter
Rf
Rd
(1)
(3)
C1 C2
(2)
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P16E.pdf
Oct.1,2018
Frequency Temperature Characteristics
CSTLS_G
CSTLS_X
+0.25
0
–40
–0.25
–0.50
5
18
0.3
0
40
80
120
Temperature (°C)
Oscillating Frequency Shift (%)
Oscillating Frequency Shift (%)
+0.50
0.2
0.1
0.0
–50
–0.1
–0.2
–0.3
–30
–10
10
30
50
70
90
110
130
Temperature (°C)
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2018
Notice for Consumer/Industrial Usage -MHz Chip Type
Soldering and Mounting (CSTCR_G/CSTNR_GH5L, CSTNE_G/GH5L, CSTNE_V/VH3L Series)
1. Soldering
(1) Reflow soldering
Please mount the component on a circuit board by reflow
soldering. Flow soldering is not acceptable.
Flux
Please use rosin based flux,
not water soluble flux.
Solder
Please use solder (Sn-3.0Ag-0.5Cu) under
the following conditions: Standard thickness
of soldering paste: 0.10 to 0.15mm.
Recommendable Soldering Profile
Pre-heating
60 to 120s
220°C min.
30 to 60s
upper limit: 260°C
1s max.
lower limit: 245°C
5s max.
Heating
Peak Temperature
150 to 180°C
Temperature (°C)
Recommendable Flux and Solder
Peak
260
245
220
Heating
(220°C min.)
180
150
Pre-heating
(150 to 180°C)
60 to 120s
Gradual
Cooling
30 to 60s
Temperature shall be measured on the surface of component.
(2) Soldering with Iron
If compelled to mount the component by using a
soldering iron, please do not directly touch the
component with the soldering iron. The component
terminals or electrical characteristics may be damaged if
excessive thermal stress is applied.
Recommendable Soldering with Iron
Heating of the soldering iron
Watt
Shape of the soldering iron
Soldering Time
Solder
350°C max.
30W max.
ø3mm max.
5s max. at one terminal
Sn-3.0Ag-0.5Cu
(4) Other
Do not reuse components removed from a circuit board
after soldering.
(5) Conditions for Placement Machines
The component is recommended with placement
machines that employ optical placement capabilities.
The component may be damaged by excessive
mechanical force. Please make sure that you have
evaluated by using placement machines before going into
mass production. Do not use placement machines that
utilize mechanical positioning. Please contact Murata for
details beforehand.
(3) Solder Volume
Please make the solder volume less than the height of
the substrate to avoid damage to the seal between the
metal cap and the substrate.
2. Washing / Coating
Conformal coating or washing of the component is not
acceptable, because it is not hermetically sealed.
Please contact us if you need a washable component.
Continued on the following page.
19
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice for Consumer/Industrial Usage -MHz Chip Type
Continued from the preceding page.
Storage and Operating Conditions
1. Product Storage Conditions
Please store the products in a room where the
temperature/humidity is stable, and avoid
places where there are large temperature
changes. Please store the products under the
following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six
months after delivery under the conditions of a
sealed and unopened package. Please use the
products within six months after delivery. If you
store the products for a long time (more than six
months), use carefully because the products may
be degraded in solderability and/or rusty.
Please confirm solderability and characteristics
for the products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage in a chemical
atmosphere.
Rating
The component may be damaged if excessive mechanical
stress is applied.
Handling
"CERALOCK" may stop oscillating or oscillate
irregularly under improper circuit conditions.
20
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
and/or dusty places.
(3) Please do not store the products in places
such as: in a damp heated place, in a place where
direct sunlight comes in, in a place applying
vibrations.
(4) Please use the products immediately after the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage under poor
conditions.
(5) Please do not drop the products to avoid cracking
of ceramic elements.
4. Other
Conformal coating or washing of the component is not
acceptable because it is not hermetically sealed.
Please be sure to consult with our sales representatives
or engineers whenever and prior to using the products.
P16E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P16E.pdf
Oct.1,2018
Notice for Consumer/Industrial Usage -MHz Lead Type
Soldering and Mounting (CSTLS_G, CSTLS_X Series)
The component cannot withstand washing.
Please do not apply excessive mechanical stress to the
component and lead terminals during soldering.
Storage and Operating Conditions
1. Product Storage Conditions
Please store the products in a room where the
temperature/humidity is stable, and avoid
places where there are large temperature
changes. Please store the products under the
following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six
months after delivery under the conditions of a
sealed and unopened package. Please use the
products within six months after delivery. If you
store the products for a long time (more than six
months), use carefully because the products may
be degraded in solderability and/or rusty.
Please confirm solderability and characteristics
for the products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage in a chemical
atmosphere.
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
and/or dusty places.
(3) Please do not store the products in places
such as: in a damp heated place, in a place where
direct sunlight comes in, in a place applying
vibrations.
(4) Please use the products immediately after the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage under poor
conditions.
(5) Please do not drop the products to avoid cracking
of ceramic elements.
4. Other
Conformal coating or washing of the component is not
acceptable because it is not hermetically sealed.
Please be sure to consult with our sales representatives
or engineers whenever and prior to using the products.
Rating
The component may be damaged if excessive mechanical
stress is applied.
Handling
"CERALOCK" may stop oscillating or oscillate
irregularly under improper circuit conditions.
21
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2018
Packaging for Consumer/Industrial Usage -MHz Chip Type
Minimum Quantity
Plastic Tape ø180mm
Plastic Tape ø330mm
Bulk
Reel Dimensions
CSTCR_G
Part Number
3,000
9,000
500
a
CSTNR_GH5L
3,000
9,000
500
a
CSTNE_G
3,000
9,000
500
b
CSTNE_GH5L
3,000
9,000
500
b
CSTNE_V
3,000
9,000
500
b
CSTNE_VH3L
3,000
9,000
500
b
(pcs.)
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
Dimensions of Reel
a
b
Trailer
160-190
Leader
Components
Empty
160 min.
Empty Components
ø13.0±0.2
Empty
160 min.
400-560
400-560
(ø1800
–1.5)
(ø1800
–1.5)
Empty
Leader
Cover Film
Trailer
160-190
Cover Film
2.0±0.5
+1.0
ø13.0±0.2
2.0±0.5
+1.0
13.0 0
9.0 –0
17.0±1.0
13.0±1.0
(in mm)
Dimensions of Taping
10°
(in mm)
Direction of Feed
8.0±0.2
(1.30 max.)
3.5±0.05
(7˚)
0.25±0.05
0.90±0.10
+0.10
3.40 -0.05
(3)(2)(1)
(5.2)
12.0±0.2
Direction of Feed
+0.1
ø1.5 -0.0
2.0±0.05
+0.2
4.0±0.1
ø1.0 -0.0
+0.10
Cover film peel strength force 0.1 to 0.7N 1.50 -0.05
Cover film peel speed 300mm/min.
Cover Film
(1.85 max.)
(5°)
0.25±0.05
ø1.5±0.1
4.0±0.1
2.2±0.1
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Cover Film
10°
4.0±0.1
1.25±0.1
(9.5)
(3)(2)(1)
4.7±0.1
2.0±0.05
5.5±0.05
+0.1
ø1.5 -0
1.75±0.1
CSTNE_GH5L
1.75±0.1
CSTNR_GH5L
4.0±0.1
(in mm)
8.0±0.2
+0.10
3.40 -0.05
(3)(2)(1)
+0.2
(5°)
Direction of Feed
1.10±0.10
+0.10
(1.40 max.)
ø1.0 -0.0
Cover film peel strength force 0.1 to 0.7N 1.50 -0.05
Cover film peel speed 300mm/min.
Cover Film
10°
0.25±0.05
(5.2)
4.0±0.1
3.5±0.05
1.75±0.1
CSTNE_VH3L
Dimensions of Carrier Tape
4.0±0.1
+0.1
ø1.5 -0.0
2.0±0.05
(in mm)
Continued on the following page.
22
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2018
Packaging for Consumer/Industrial Usage -MHz Chip Type
Continued from the preceding page.
Dimensions of Taping
10°
(in mm)
Direction of Feed
8.0±0.2
3.5±0.05
+0.10
3.40 -0.05
(7˚)
(1.30 max.)
(1.85 max.)
0.3±0.05
1.25±0.05
Direction of Feed
(3)(2)(1)
(5.2)
+0.2
4.0±0.1
ø1.0 -0.0
+0.10
Cover film peel strength force 0.1 to 0.7N 1.50 -0.05
Cover film peel speed 300mm/min.
Cover Film
4.0±0.1
(3°)
+0.1
ø1.5 -0.0
2.0±0.05
0.25±0.05
0.90±0.10
+0.1
ø1.5 -0
2.2±0.1
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Cover Film
10°
4.0±0.1
12.0±0.2
(9.5)
(3)(2)(1)
4.7±0.1
2.0±0.05
5.5±0.05
+0.1
ø1.5 -0
1.75±0.1
CSTNE_G
1.75±0.1
CSTCR_G
4.0±0.1
(in mm)
8.0±0.2
+0.10
3.40 -0.05
(3)(2)(1)
Direction of Feed
1.10±0.10
(5°)
(1.40 max.)
+0.2
ø1.0 -0.0
+0.10
Cover film peel strength force 0.1 to 0.7N 1.50 -0.05
Cover film peel speed 300mm/min.
Cover Film
10°
0.25±0.05
(5.2)
4.0±0.1
3.5±0.05
1.75±0.1
CSTNE_V
Dimensions of Carrier Tape
4.0±0.1
+0.1
ø1.5 -0.0
2.0±0.05
(in mm)
23
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2018
Packaging for Consumer/Industrial Usage -MHz Lead Type
Minimum Quantity
Ammo Pack
Bulk
CSTLS_G (3.40 to 10.0MHz)
Part Number
2,000
500
CSTLS_X (16.00 to 70.00MHz)
2,000
500
(pcs.)
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
Tape Dimensions of CSTLS_G
P2
P
dh dh
dS
D
M* * *
A
W2
d
W1
W0
W
L1
H0
H1
M* * *
D0
P1
F1 F2
P0
Item
t
Direction of Feed
Code
Dimensions
Tolerance
Width of diameter
D
8.0
±1.0
Height of resonator
A
5.5
±0.5
Dimensions of terminal
d
ø0.48
Lead length under the hold down tape
L1
5.0 min.
Pitch of component
P
12.7
±0.5
Pitch of sprocket hole
P0
12.7
±0.2
Length from sprocket hole center to lead
P1
3.85
±0.5
Length from sprocket hole center to
component center
P2
6.35
±0.5
Lead spacing (I)
F1
2.5
±0.2
Lead spacing (II)
F2
2.5
±0.2
Slant forward or backward
dh
0
±1.0
Width of carrier tape
W
18.0
±0.5
Width of hold down tape
W0
6.0 min.
Position of sprocket hole
W1
9.0
Gap of hold down tape and carrier tape
W2
0
±0.5
+0.5
−0
Distance between the center of
sprocket hole and lead stopper
H0
18.0
±0.5
Total height of resonator
H1
23.5
±1.0
Diameter of sprocket hole
D0
ø4.0
±0.2
t
0.6
±0.2
0
±1.0
Total tape thickness
Body tilt
dS
Remarks
±0.05
–
–
Tolerance for Pitches 10xP0=127±1
1mm max.
Hold down tape does not exceed the carrier tape.
(in mm)
Continued on the following page.
24
P16E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2018
Packaging for Consumer/Industrial Usage -MHz Lead Type
Continued from the preceding page.
Tape Dimensions of CSTLS_X
P
P2
dS
H0
W0
W1
W
L1
d
H1
W2
A
D
dh dh
D0
P1 F1 F2
Direction of Feed
P0
Item
t
Code
Dimensions
Tolerance
Width of diameter
D
5.5
±1.0
Height of resonator
A
6.5
Dimensions of terminal
d
ø0.48
Lead length under the hold down tape
L1
5.0 min.
Pitch of component
P
12.7
±0.5
Pitch of sprocket hole
P0
12.7
±0.2
Length from sprocket hole center to lead
P1
3.85
±0.5
Length from sprocket hole center to
component center
P2
6.35
±0.5
Lead spacing (I)
F1
2.5
±0.2
Lead spacing (II)
F2
2.5
±0.2
Slant forward or backward
dh
0
±1.0
Width of carrier tape
W
18.0
±0.5
Width of hold down tape
W0
6.0 min.
Position of sprocket hole
W1
9.0
Gap of hold down tape and carrier tape
W2
0
±0.5
+0.5
−0.0
Distance between the center of
sprocket hole and lead stopper
H0
18.0
±0.5
Total height of resonator
H1
24.5
±1.0
Diameter of sprocket hole
D0
ø4.0
±0.2
t
0.6
±0.2
0
±1.0
Total tape thickness
Body tilt
dS
Remarks
±0.5
±0.05
–
–
Tolerance for Pitches 10xP0=127±1
1mm max.
Hold down tape does not exceed the carrier tape.
(in mm)
25
P16E.pdf
Oct.1,2018
Cat. No. P16E-27
Global Locations
For details please visit www.murata.com
Note
1 Export Control
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law”
of Japan, the export license specified by the law
is required for export.
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
1
Aircraft equipment
2
Aerospace equipment
3
Undersea equipment
4
Power plant equipment
5
Medical equipment
6
Transportation equipment (vehicles, trains,
ships, etc.)
7
Traffic signal equipment
8
Disaster prevention / crime prevention
equipment
9
Data-processing equipment
10
Application of similar complexity and/or
reliability requirements to the applications
listed above
Murata Manufacturing Co., Ltd.
www.murata.com
3 Product specifications in this catalog are as of
October 2018. They are subject to change or
our products in it may be discontinued without
advance notice. Please check with our sales
representatives or product engineers before
ordering. If there are any questions, please contact
our sales representatives or product engineers.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
5 This catalog has only typical specifications.
Therefore, please approve our product
specifications or transact the approval sheet
for product specifications before ordering.
6 Please note that unless otherwise specified, we
shall assume no responsibility whatsoever for any
conflict or dispute that may occur in connection
with the effect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the effect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.