D2U5T-H3-5000-380-HU3C

D2U5T-H3-5000-380-HU3C AC-DC Three Phase Power Converter PRODUCT OVERVIEW The D2U5T-H3-5000-380-HU3C is a High Efficiency 3500/5000 watt, power factor corrected three phase power supply for 230/480Vac lines with a 380V high voltage (HVDC) main output and a selectable 5V or 3.3V (20W) standby. The unit is provided with Droop Sharing and up to three (3) power modules may be operated in parallel. The power module is hot pluggable. The module is able to protect and recover from over temperature faults, and has status LEDs on the front panel and additional logic and PMBus status signals. Their 2U package and >16.5W/cubic inch power density make them ideal for delivering reliable, efficient power to servers, workstations, storage systems and other 380V HVDC distributed power systems. An optional power shelf is also available that accommodates up to three (3) power modules. ORDERING GUIDE FEATURES  5KW (480Vac), 3.5KW (230Vac) Output Power  Very High Efficiency; 95.4% @ 50% FL  380V High Voltage Main Output  3.3V or 5V Standby Output  Nominal Dim’s: 5.1"(W) x 18"(L) x 3.3" (2U  16.5 watts/cubic inch power density  N+1 redundant (including hot docking)  Droop sharing on Main Output  Over-voltage, over-current, overtemperature protections  Internal cooling fan  I2C Bus Interface with status indicators  Optional 19" power shelf  RoHS compliant  Two-year warranty Model Number Power Main Output D2U5T-H3-5000-380-HU3C 5000W 380V INPUT CHARACTERISTICS Parameter Input Frequency Input Voltage Operating Range Turn-on Voltage (Ramp-up) Turn-off Voltage (Ramp-down) Maximum Input Current Inrush Current Power Factor, Range 1, 60Hz Power Factor, Range 2, 60Hz www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html Available now at: www.murata-ps.com/en/3d/acdc.html For full details go to www.murata-ps.com/rohs Standby Output 3.3V or 5V (Selectable) Conditions Range 1 Range 2 Range 1 Range 2 Range 1 Range 2 Cold Start 600W, 230 Vac 1750W (50%), 230 Vac 3500W (100%), 230 Vac 600W, 480 Vac 2500W (50%), 480 Vac 5000W (100%), 480 Vac Min 47 180 320 Airflow Front to Back Typ 50/60 Max 63 264 528 170 280 150 260 13 30 Units Hz Vac Vac Vac Vac Vac Vac Arms Apk 0.992 0.998 0.998 0.910 0.995 0.995 OVERALL CHARACTERISTICS Parameter Conditions Min Typ Max Units Range 1 3500 Output Power W Range 2 5000 700W (20%), 230Vac 89.5 Efficiency, Range 1 1750W (50%), 230Vac 93.6 3500W (100%), 230Vac 94.2 % 500W (20%), 230Vac 92.6 Efficiency, Range 2 2500W (50%), 230Vac 95.4 5000W (100%), 230Vac 95.4 The following curves represent the achieved efficiency performance for the D2U5T-H3-5000-380-HU3C product compared against a recognized industry standard for efficiency rating. The D2U5T-H3-5000-380-HU3C offers performance in excess of the industry standard limit as a required percentage of loading. Test methodology as per Ecova Generalized Test Protocol for Calculating the Energy Efficiency of Internal AC-DC and DC-DC Power Supplies Revision 6.7 Test Certificate and Test Report www.murata-ps.com/support D2U5T-H3-5000-380-HU3C.A04 Page 1 of 8 D2U5T-H3-5000-380-HU3C AC-DC Three Phase Power Converter EFFICIENCY PERFORMANCE CURVES OUTPUT VOLTAGE CHARACTERISTICS Output Parameter 380V Output Current Voltage Set Point Voltage Droop 3.3VSB 5VSB Line Regulation Ripple Voltage & Noise1 Load Capacitance Voltage Set Point Line and Load Regulation Ripple Voltage & Noise2 Output Current Load Capacitance Voltage Set Point Line and Load Regulation Ripple Voltage & Noise2 Output Current Load Capacitance Min 0 0 Conditions Range 1 Range 2 @4.6A Range 1 @6.67A Range 2 Min to Max Current, Range 1 Min to Max Current, Range 2 Typ Max 9.2 13.34 380 380 7 11 0.1 1 100 Vdc 1000 3.3 3.14 3.46 75 6 1000 20MHz Bandwidth 0 20 5 4.76 20MHz Bandwidth 0 20 Units Adc 5.24 100 4 1000 % Vp-p μF Vdc mVp-p A μF Vdc mVp-p A μF 1 Ripple and noise are measured with 22nF (U2J 630V) ceramic + 15 μF (UCC KXJ) of electrolytic de-coupling capacitors at the output connector load side. A short coaxial cable with 50ohm scope termination is used. 2 Ripple and noise are measured with 0.1 uF of ceramic capacitance and 10 uF of tantalum capacitance across the power supply outputs at the output connector load side. A short coaxial cable with 50ohm scope termination is used. www.murata-ps.com/support D2U5T-H3-5000-380-HU3C.A04 Page 2 of 8 D2U5T-H3-5000-380-HU3C AC-DC Three Phase Power Converter OUTPUT CHARACTERISTICS Parameter Startup Time Transient Response Current sharing accuracy (up to 3 in parallel) Hot Swap Transients Holdup Time GENERAL CHARACTERISTICS Parameter Storage Temperature Range Operating Temperature Range Operating Humidity Storage Humidity Altitude Shock Sinusoidal Vibration MTBF Weight Safety Approvals Input Fuses Material Flammability PROTECTION CHARACTERISTICS Output Parameter Over-temperature (intake) Over Voltage Over Current Range 1 380V Over Current Range 2 Over Voltage 3.3VSB Over Current Over Voltage 5VSB Over Current Conditions AC ramp up 380V, 50-100% load step, 0.1A/μs di/dt 5VSB, 50-100% load step, 1A/μs di/dt 3.3VSB, 50-100% load step, 1A/μs di/dt 380V @100% load All outputs within regulation 380V @100% load VSB @100% Load Conditions Non-condensing Non-condensing (Without derating at 40°C) (Without derating at 50°C) 30G non-operating 0.5G, 5 – 500 Hz Calculated per Telcordia SR-332 @40°C Min Typ Max 3 15 250 165 +/-10 25 500 Min -40 -15 10 5 Units s Vp-p mVp-p mVp-p % ms Typ Max 70 50 90 90 3000 1800 Units °C °C % % m hrs kg 220K 7 CAN/CSA C22.2 No 60950-1-07, Am.1:2011, Am 2:2014 ANSI/UL 60950-1-2014 IEC60950-1:2005 (2nd Ed.), Am 1:2009 + Am 2:2013 EN 60950-1:2006+A11:2009 +A1:2010 +A12:2011 +A2:2013 Power Supply has one internal 16A/500V fast blow fuse on each of the three AC line inputs. UL 94V0 Conditions Auto-restart Latching Hiccup or Latching Hiccup or Latching Latching Hiccup Latching Hiccup Min 57 418 105 105 3.9 6.3 5.6 4.2 Typ 60 Max 63 445 130 130 4.3 9 6.0 6 Units °C V % % V A V A www.murata-ps.com/support D2U5T-H3-5000-380-HU3C.A04 Page 3 of 8 D2U5T-H3-5000-380-HU3C AC-DC Three Phase Power Converter EMISSIONS AND IMMUNITY Characteristic Input Current Harmonics Conducted Emissions Radiated Emissions (in the application) ESD Immunity Radiated Field Immunity Electrical Fast Transients/Burst Immunity Surge Immunity RF Conducted Immunity Magnetic Field Immunity Standard IEC/EN 61000-3-2 FCC 47 CFR Parts 15 CISPR 22 EN55022 IEC/EN 61000-4-2 IEC/EN 61000-4-3 IEC/EN 61000-4-4 IEC/EN 61000-4-5 IEC/EN 61000-4-6 IEC/EN 61000-4-8 Voltage Dips & Interruptions IEC/EN 61000-4-11 Voltage imbalance (Circuit will stop when input voltage imbalance exceeds 8% for more than 100ms. Unit will restart when imbalance returns below 8%) ISOLATION CHARACTERISTICS Parameter Insulation Safety Rating/Test Voltage Conditions Input to Output – Reinforced Input to Chassis – Basic Output to Chassis – Basic Compliance Complies Class A, 6dB margin Class A, 6dB margin Level 3 criteria A Level 3 criteria B Level 3 criteria A Level 3 criteria A Level 3 criteria A 3 A/m criteria B 400Vrms Input Voltage Main & VSB Outputs, Performance a) 100% load, Phase 0°, Dip 100% Duration 10ms 50% load, Phase 0°, Dip 100% Duration 20ms Main & VSB Outputs, Performance b) 100% load, Phase 0°, Dip 100% Duration >10ms Any Load, Phase 0°, Dip 100% Duration >100ms Any valid Input Voltage, any load Main & VSB Outputs, Performance a) Dip 30% on single Phase or Line, Duration 100ms Main & VSB Outputs, Performance b) Dip 30% on single Phase or Line, Duration >100ms Min 3000 1500 1150 Typ Max Units Vrms Vrms Vrms www.murata-ps.com/support D2U5T-H3-5000-380-HU3C.A04 Page 4 of 8 D2U5T-H3-5000-380-HU3C AC-DC Three Phase Power Converter STATUS INDICATORS (LEDs) Status Indicators AC input voltage is not present AC present and within the required operational range Standby – ON; Main Output – OFF (disabled) Input OK (Green) Output OK (Green) Fault4 (Yellow) Off Off Off Solid Green Blinking Off Blinking Green at 1Hz rate Off (0.5s on, 0.5s off) AC present, but its level is not within the required operational range Off Blinking Green at 1Hz rate Off (0.5s on, 0.5s off) When hot-unplugging the power supply from a power shelf 3 AC present and within the required operational range Standby – ON and within the specified regulation range Main Output – ON and within the specified regulation range Solid Green Off Solid Green Off AC present and within the required operational range Standby – ON and within the specified regulation range Main Output – ON and within the specified regulation range Main output overcurrent condition are indicated depending upon severity and application of overload and specific detection mechanism responding: Solid Green Solid Green Solid Green Output power warning Pout overpower fault Iout overcurrent fault Solid Green Blinking 1Hz Solid Green On Blinking Green On Any warning Levels (Input UV/OV, OC, Inlet Temp, Output and STBY OV/UV, OC, OTP, FAN) No Change No Change Blinking 1Hz Depends on PS Any Fault Levels (Input UV/OV, OC, Inlet Temp, Output and STBY OV/UV, OC, OTP, FAN) Depends on PS Status Depends on PS Status 3 The Input OK LED blinks to indicate that there is still energy inside the power supply until the input bulk capacitors are completely discharged or the housekeeping circuit is shut down. 4 The Fault LED and PS Fault signal shall be turned on to indicate that there is one or more of the following internal faults currently detected inside the power supply:  VSB out of range  Output stage OT  Fan fault  ORING fault (Output voltage less than bus voltage)  OC shutdown  OT shutdown  OV shutdown  Input stage OT  Fault induced shutdown occurred  Thermal sensor fault  Vout out of range  PFC Boost Vbulk fault As soon as all of the above faults are removed and the power supply operates normally, the Fault LED and PS Fault signal shall be turned off. LED Definition: Three LEDs shall be located on the front faceplate; these are: LED Status Input OK = ON Output OK = ON Fault = ON www.murata-ps.com/support D2U5T-H3-5000-380-HU3C.A04 Page 5 of 8 D2U5T-H3-5000-380-HU3C AC-DC Three Phase Power Converter CONTROL SIGNALS Signal (I/O) PS_ON_H PS_KILL PS_PRESENT PS_FAULT_L PWR_GOOD_H STBY_SEL_IN AC_OK_H SMB_ALERT_L VOUT_PRE-CHARGE, +/A0, A1 & A2 Description Internal 10K pull-up resistor to internal VDD.5  Leaving signal pin open = Main Output ON  Tying signal pin to GND = Main Output OFF Short pin; internal 10K pull-up resistor to internal VDD.5  Leaving signal pin open = All Outputs off  Tying signal pin to GND = All Outputs enabled Interanally shorted to SIG_GND, STBY_RTN  used by system (where signal may be pulled up) for detection of a power module being installed into backplane. Internal 10K pull-up resistor to internal VDD5  PSU Fault Status Internal 10K pull-up resistor to internal VDD.5  Main Output Status OK Internal 10K pull-up resistor to internal VDD5  Leaving signal pin open = +5VSTBY  Tying signal pin to GND = +3V3STBY Internal 10K pull-up resistor to internal VDD.5  AC OK Status Internal 10K pull-up resistor to internal VDD5  SMB Alert signal output Input to Power Module for hotswap function.  + VOUT_PRE_CHARGE: internally pulled up via 1K OHM resistor to main output return “+“  - VOUT_PRE_CHARGE: internally pulled up via 1K OHM resistor to main output return “-“ Addressing bit lines used can be used to assign the power supply’s controller and EEPROM device PMBus address. The table below lists the possible address combinations that can be assigned. DEVICE ADDRESS PIN STRAPPING ADDRESS OPTIONS Serial Address Bits A2 A1 A0 Bit 2 Bit 1 Bit 0 LOW LOW LOW LOW LOW HIGH LOW HIGH LOW LOW HIGH HIGH HIGH LOW LOW HIGH LOW HIGH HIGH HIGH LOW HIGH HIGH HIGH   Corresponding Power Module Slave Device Address PSU Main Controller PSU EEPROM (Secondary) (External) 0xB0 0xA0 0XB2 0xA2 0xB4 0xA4 0XB6 0xA6 0XB8 0XA8 0xBA 0xAA 0xBC 0xAC 0xBE 0xAE Each address line is pulled up via 10K to internal VDD All three (3) pins unterminated result in address BE and AE respectively Refer to Applcation notes ACAN-61 and ACAN-63 for further details 5 VDD depends on Standby Voltage selection of either 3.3V or 5V. www.murata-ps.com/support D2U5T-H3-5000-380-HU3C.A04 Page 6 of 8 D2U5T-H3-5000-380-HU3C AC-DC Three Phase Power Converter OUTPUT CONNECTOR & PIN ASSIGNMENT (Power Module Connector: FCI Power Blade Part # 51915-424 (MATING CONNECTOR: FCI 51939-826LF) Pin P13 P12 P11 Designation -VOUT_PRE-CHARGE -VOUT +VOUT_PRE-CHARGE Function Hot Swap Pre Charge 380Vdc return Hot Swap Pre Charge Signal Direction Output Output Output Pin B1 B2 B3 Designation A2 PS_ON_H +VSB Function I2C Address Bit 2 Signal Enable PSU +3.3V/5V STBY Out Signal Direction Input Input Output P10 P9 P8 P7 P6 P5 P4 P3 P2 P1 A1 A2 A3 A4 A5 A6 +VOUT Not fitted Not fitted AC1 Not fitted AC2 Not fitted AC3 Not fitted GND A1 PS_FAULT_L A0 PS_PRESENT SCL SGND 380Vdc AC Line Voltage Ph 1 AC Line Voltage Ph 2 AC Line Voltage Ph 3 Safety ground I2C Address Bit 1 Signal PSU Fault Status I2C Address Bit 0 Signal PSU Seated into Connector I2C Clock Signal Signal ground (return) Output Input Input Input Input Input Output Input Output Bi-Directional Output B4 B5 B6 C1 C2 C3 C4 C5 C6 D1 D2 D3 D4 D5 SDA PS_KILL VSB_RTN STBY_SEL_IN AC_OK_H +VSB +VSB VSB_RTN VSB_RTN SMB_ALERT_L PWR_GOOD_H +VSB +VSB VSB_RTN I2C Data Signal Enable PSU VSTBY_RT Selects +3V3 or +5VSTBY AC(DC) OK Status +3.3V/5V STBY Out +3.3V/5V STBY Out VSTBY_RT VSTBY_RT SMB Alert signal output Power OK Status +3.3V/5V STBY Out +3.3V/5V STBY Out VSTBY_RT Bi-Directional Input Output Input Output Output Output Output Output Output Output Output Output Output D6 VSB_RTN VSTBY_RT Output CHANICAL DIMENSIONS www.murata-ps.com/support D2U5T-H3-5000-380-HU3C.A04 Page 7 of 8 D2U5T-H3-5000-380-HU3C AC-DC Three Phase Power Converter MECHANICAL DIMENSIONS OPTIONAL ACCESSORIES Description Part Number 12V D2U5T-380 Output Connector Card D2U5T-380-CONC APPLICATION NOTES Document Number Description Link ACAN-62 D2U5T-380-CONC Customer Interface Connector Card http://power.murata.com/datasheet?/data/apnotes/acan-62.pdf ACAN-63 PMBusTM Communication Protocol for: D2U5T-H3-5000-380-Hu3C http://power.murata.com/datasheet?/data/apnotes/acan-63.pdf Murata Power Solutions, Inc. 129 Flanders Road Westborough, MA 01581 ISO 9001 and 14001 REGISTERED This product is subject to the following operating requirements and the Life and Safety Critical Application Sales Policy. Refer to: http://www.murata-ps.com/requirements/ Murata Power Solutions, Inc. (“Murata”) makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards that anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm, and take appropriate remedial actions. Buyer will fully indemnify Murata, its affiliated companies, and its representatives against any damages arising out of the use of any Murata products in safety-critical applications. Specifications are subject to change without notice. © 2018 Murata Power Solutions, Inc. www.murata-ps.com/support D2U5T-H3-5000-380-HU3C.A04 Page 8 of 8