!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified
Ceramic Capacitors/
High Voltage
Ceramic Capacitors
Cat.No.C85E-2
C85E.pdf
08.10.29
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for EU RoHS Compliant
•
•
•
All the products in this catalog comply with EU RoHS.
EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment".
For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CONTENTS
Part Numbering
1
2
1
Type KY (Basic Insulation) -IEC60384-14 Class X1, Y2-
4
2
Type KH (Basic Insulation) -IEC60384-14 Class X1, Y2-
6
3
Type KX Small Size (Reinforced Insulation) -IEC60384-14 Class X1, Y1-
8
4
Type KX (Reinforced Insulation) -IEC60384-14 Class X1, Y1-
10
Type KY/KH/KX Specifications and Test Methods
12
DEJ Series -Based on the Electrical Appliance and Material Safety Law of Japan-
16
DEJ Series Specifications and Test Methods
17
5
Safety Certified Ceramic Capacitors Characteristics Data (Typical Example)
20
Safety Certified Ceramic Capacitors Packaging
23
Safety Certified Ceramic Capacitors !Caution
25
Safety Certified Ceramic Capacitors Notice
28
6
7
8
9
10
11
DES Series (125 deg. C Guaranteed/Low-dissipation Factor/DC500V-1kV)
29
DES Series Specifications and Test Methods
31
DEH Series (125 deg. C Guaranteed/Low-dissipation Factor/DC250V-3.15kV)
33
DEH Series Specifications and Test Methods
36
DEA Series (125 deg. C Guaranteed/Class 1/DC1k-3.15kV)
39
DEA Series Specifications and Test Methods
42
DEB Series (Class 2/DC1k-3.15kV)
44
DEB Series Specifications and Test Methods
47
DEC Series (Class 1, 2/DC6.3kV)
49
DEC Series Specifications and Test Methods
51
DEF Series (Only for LCD Backlight Inverter Circuit/6.3kVp-p)
53
DEF Series Specifications and Test Methods
55
High Voltage Ceramic Capacitors Characteristics Data (Typical Example)
57
High Voltage Ceramic Capacitors Packaging
58
High Voltage Ceramic Capacitors !Caution
60
High Voltage Ceramic Capacitors Notice
68
Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors ISO9000 Certifications
69
2
3
4
5
6
7
8
9
10
11
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
o Part Numbering
Safety Standard Certified Ceramic Capacitors
(Part Number)
DE
2
E3
KH 102 M
N3
A
q
w
e
r
u
i o
t
y
yCapacitance Tolerance
qProduct ID
Code
Product ID
Safety Standard Certified Ceramic Capacitors /
High Voltage Ceramic Capacitors
DE
wSeries Category
Code
Outline
Contents
1
Safety Standard
Certified
IEC60384-14 Class X1, Y1
2
J
AC250V
(r.m.s.)
T5%
K
T10%
M
T20%
Z
W80%, Y20%
uLead Style
IEC60384-14 Class X1, Y2
"Products which are based on
the Electrical Appliance and
Material Safety Law of Japan"
In case of Electrical Appliance and Material Safety Law of Japan, first
three digits (qProduct ID and wSeries Category) express "Series
Name".
In case of Safety Certified Capacitors, first three digits express
product code. The following fourth figure expresses certified type
shown in rSafety Standard Certified Type column.
Lead
Style
Code
A2
eTemperature Characteristics
A4
Code
B3
B
T10%
E3
E
W20%,Y55%
F3
F
W30%,Y80%
1X
SL
Temperature
Range
W350 to Y1000ppm/D W20 to W85D
Code
2
Lead Diameter
ø0.6T0.05
10
10
5
Pitch of
Components
Y
ø0.6W0.1,Y0.05
Vertical
Crimp
Short
7.5
10
ø0.6W0.1, Y0.05
C3
Straight Long
7.5
ø0.6T0.05
Y
D3
Straight Short
7.5
ø0.6T0.05
Y
Vertical
Crimp
Taping
7.5
B3
ø0.6T0.05
10
5
N3
N4
N5
N7
rRated Voltage/Safety Standard Certified Type
7.5
B2
N2
Y25 to W85D
Lead
Spacing
A5
B5
Cap.Change
or Temp. Coeff.
Dimensions (mm)
5
Vertical
Crimp
Long
A3
B4
Temperature
Characteristics
Capacitance Tolerance
J
Straight Taping
P3
Y
12.7
ø0.6T0.05
10
15
25.4
10
ø0.6W0.1, Y0.05
25.4
7.5
ø0.6T0.05
30
7.5
ø0.6T0.05
15
Rated Voltage
iPackaging
E2
AC250V
KH
X1, Y2; AC250V, (Safety Standard Certified Type KH)
Code
Packaging
KY
X1, Y2; AC250V, (Safety Standard Certified Type KY)
A
Ammo Pack Taping Type
KX
X1, Y1; AC250V, (Safety Standard Certified Type KX)
B
Bulk Type
tCapacitance
oIndividual Specification Code
Expressed by three figures. The unit is pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two numbers.
In case part number cannot be identified without "Individual
Specification", it is added at the end of part number. Expressed
by three-digit alphanumerics.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors (250V-6.3kV)
(Part Number)
DE
B
B3
3A
102
K
N2
A
q
w
e
r
t
y
u
i o
yCapacitance Tolerance
qProduct ID
Product ID
Code
Capacitance Tolerance
C
T0.25pF
D
T0.5pF
High Voltage Ceramic Capacitors (250V-6.3kV) /
Safety Standard Certified Ceramic Capacitors
DE
wSeries Category
Code
Outline
Contents
A
Class 1 (Char. SL) DC1-3.15kV Rated
B
Class 2 DC1-3.15kV Rated
C
Class 1, 2 DC6.3kV Rated
High Temperature Guaranteed,
Low-dissipation Factor (Char. R, C)
S
High Temperature Guaranteed,
Low-dissipation Factor (Char. D)
A2
F
LCD Backlight Inverter Circuit
A4
High Voltage
First three digits (qProduct ID and wSeries Category) express "Series
Name".
T5%
K
T10%
Z
W80%, Y20%
uLead Style
Code
H
J
Lead
Style
A3
B2/J2
B3/J3
B4
eTemperature Characteristics
Cap. Change
or Temp. Coeff.
B3
B
T10%
E3
E
W20%,Y55%
F3
F
W30%,Y80%
Code
C3
C
R3
R
D3
D
1X
SL
2C
CH
Temperature
Range
Vertical
Crimp
Short
7.5
C4
D1
Straight
Short
D3
T20%
Y25 to W85D
DD
W15%,Y30%
W85 to W125D
N2
T15%
Y25 to W85D
N3
W15%,Y30%
W85 to W125D
N7
W20%,Y30%
Y25 to W125D
P2
W350 to Y1000ppm/D
W20 to W85D
P3
0T60ppm/D
Straight
Long
W20 to W85D
rRated Voltage
Vertical
Crimp
Taping
Straight
Taping
Pitch of
Components
ø0.6T0.05
Y
ø0.6T0.05
Y
10
5
10
5
C3
Lead Diameter
5
7.5
CD
Y25 to W85D
Lead
Spacing
Vertical
Crimp
Long
C1
Temperature
Characteristics
Dimensions (mm)
7.5
10
ø0.5T0.05
ø0.6T0.05
7.5
ø0.5T0.05
5
ø0.5T0.05
7.5
ø0.6T0.05
7.5
ø0.5T0.05
5
7.5
30
5
12.7
7.5
ø0.6T0.05
Code
Packaging
A
Ammo Pack Taping Type
DC250V
B
Bulk Type
2H
DC500V
3A
DC1kV
3D
DC2kV
3F
DC3.15kV
DC6.3kV
15
iPackaging
Rated Voltage
6.3kVp-p
15
7.5
2E
LH
Y
12.7
ø0.6T0.05
Code
3J
Y
oIndividual Specification Code
In case part number cannot be identified without "Individual
Specification", it is added at the end of part number. Expressed
by three-digit alphanumerics.
tCapacitance
Expressed by three figures. The unit is pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two numbers.
3
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors
1
Type KY (Basic Insulation) -IEC60384-14 Class X1, Y2D max.
T max.
e
25.0 min.
1. We design capacitors in much more compact size than
type KH, having reduced the diameter by 25% max.
2. Operating temperature range guaranteed up to 125
degrees (UL: 85 deg.).
3. Dielectric strength:
AC2000V (In case of lead spacing F=5mm)
AC2600V (In case of lead spacing F=7.5mm)
4. Class X1/Y2 capacitors which are certified by
UL/CSA/VDE/BSI/SEMKO/DEMKO/FIMKO/NEMKO/ESTI/
NSW.
5. Coated with flame-retardant epoxy resin
(conforming to UL94V-0 standard).
6. Cost-saving automatic insertion available.
3.0 max.
■ Features
F±1.0
ød
(in mm)
[Bulk]
Vertical Crimp Long (A2, A3)
Lead Code
Coating Extension e
ød
A2, A3
Up to the end of crimp
0.6±0.05
D max.
T max.
1. Ideal for use as X/Y capacitors for AC line filter
and primary-secondary coupling on switching power
supplies and AC adapters.
2. Ideal for use on D-A isolation and noise absorption
for DAA modems without transformers.
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
■ Standard Certification
UL
CSA
VDE
BSI
Certified No.
UL1414
E384-14
IEC 60384-14
EN 60384-14
EN 60065 (8.8, 14.2)
IEC 60384-14
EN 60384-14
E37921
1283280
IEC 60384-14
EN 60384-14
NSW
IEC 60384-14
AS3250
5.0±1.0
ød
F±0.8
(in mm)
[Bulk]
Vertical Crimp Short (B2, B3)
Lead Code
Coating Extension e
ød
B2, B3
Up to the end of crimp
0.6±0.05
Example
Rated Voltage
40006273
w
q
KM 37901
812168
314115
24197
P08209361
08.0710
Item
q Type Designation KY
AC250V(r.m.s.)
6824
• The certification number might change by the revision of the application
standard and the change within the range of acquisition.
• Please contact us when the certification of Chinese Safety Standard or South
Korean Safety Standard is necessary.
4
e
■ Marking
Standard No.
SEMKO
DEMKO
FIMKO
NEMKO
ESTI
3.0 max.
■ Applications
t
472M
KY250~
X1 Y2
65
8
w Nominal Capacitance
(Under 100pF: Actual value,
100pF and over: Marked with 3 figures)
e
e Capacitance Tolerance
r
r Company Name Code
8 : Made in Taiwan 15 : Made in Thailand
t Manufactured Date Code
Class Code
X1Y2
Rated Voltage Mark
250~
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Lead Spacing F=7.5mm
Part Number
AC Rated
Voltage
(Vac)
Temp.
Char.
Capacitance
(pF)
Body
Dia. D
(mm)
Lead
Spacing F
(mm)
Body
Thickness T
(mm)
Lead
Package
Long Bulk
Lead
Package
Short Bulk
Lead
Package
Taping (1)
DE21XKY100JpppM02
250
SL
10 ±5%
8 max.
7.5
5.0 max.
A3B
B3B
N3A
DE21XKY150JpppM02
250
SL
15 ±5%
8 max.
7.5
5.0 max.
A3B
B3B
N3A
DE21XKY220JpppM02
250
SL
22 ±5%
8 max.
7.5
5.0 max.
A3B
B3B
N3A
DE21XKY330JpppM02
250
SL
33 ±5%
8 max.
7.5
5.0 max.
A3B
B3B
N3A
DE21XKY470JpppM02
250
SL
47 ±5%
8 max.
7.5
5.0 max.
A3B
B3B
N3A
DE21XKY680JpppM02
250
SL
68 ±5%
8 max.
7.5
5.0 max.
A3B
B3B
N3A
DE2B3KY101KpppM02
250
B
100 ±10%
7 max.
7.5
5.0 max.
A3B
B3B
N3A
DE2B3KY151KpppM02
250
B
150 ±10%
7 max.
7.5
5.0 max.
A3B
B3B
N3A
DE2B3KY221KpppM02
250
B
220 ±10%
7 max.
7.5
5.0 max.
A3B
B3B
N3A
DE2B3KY331KpppM02
250
B
330 ±10%
7 max.
7.5
5.0 max.
A3B
B3B
N3A
DE2B3KY471KpppM02
250
B
470 ±10%
7 max.
7.5
5.0 max.
A3B
B3B
N3A
DE2B3KY681KpppM02
250
B
680 ±10%
8 max.
7.5
5.0 max.
A3B
B3B
N3A
DE2E3KY102MpppM02
250
E
1000 ±20%
7 max.
7.5
5.0 max.
A3B
B3B
N3A
DE2E3KY152MpppM02
250
E
1500 ±20%
7 max.
7.5
5.0 max.
A3B
B3B
N3A
DE2E3KY222MpppM02
250
E
2200 ±20%
8 max.
7.5
5.0 max.
A3B
B3B
N3A
DE2E3KY332MpppM02
250
E
3300 ±20%
9 max.
7.5
5.0 max.
A3B
B3B
N3A
DE2E3KY472MpppM02
250
E
4700 ±20%
10 max.
7.5
5.0 max.
A3B
B3B
N3A
DE2F3KY103MpppM02
250
F
10000 ±20%
14 max.
7.5
5.0 max.
A3B
B3B
N3A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Individual specification code "M02" expresses "simplicity marking and guarantee of dielectric strength between lead wires: AC2600V".
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KY) and capacitance of products
in the parts list when it is required for applying safety standard of electric equipment.
Lead Spacing F=5mm
Part Number
AC Rated
Voltage
(Vac)
Temp.
Char.
Capacitance
(pF)
Body
Dia. D
(mm)
Lead
Spacing F
(mm)
Body
Thickness T
(mm)
Lead
Package
Long Bulk
Lead
Package
Short Bulk
Lead
Package
Taping (1)
DE21XKY100JpppM01
250
SL
10 ±5%
8 max.
5.0
5.0 max.
A2B
B2B
N2A
DE21XKY150JpppM01
250
SL
15 ±5%
8 max.
5.0
5.0 max.
A2B
B2B
N2A
DE21XKY220JpppM01
250
SL
22 ±5%
8 max.
5.0
5.0 max.
A2B
B2B
N2A
DE21XKY330JpppM01
250
SL
33 ±5%
8 max.
5.0
5.0 max.
A2B
B2B
N2A
DE21XKY470JpppM01
250
SL
47 ±5%
8 max.
5.0
5.0 max.
A2B
B2B
N2A
DE21XKY680JpppM01
250
SL
68 ±5%
8 max.
5.0
5.0 max.
A2B
B2B
N2A
DE2B3KY101KpppM01
250
B
100 ±10%
7 max.
5.0
5.0 max.
A2B
B2B
N2A
DE2B3KY151KpppM01
250
B
150 ±10%
7 max.
5.0
5.0 max.
A2B
B2B
N2A
DE2B3KY221KpppM01
250
B
220 ±10%
7 max.
5.0
5.0 max.
A2B
B2B
N2A
DE2B3KY331KpppM01
250
B
330 ±10%
7 max.
5.0
5.0 max.
A2B
B2B
N2A
DE2B3KY471KpppM01
250
B
470 ±10%
7 max.
5.0
5.0 max.
A2B
B2B
N2A
DE2B3KY681KpppM01
250
B
680 ±10%
8 max.
5.0
5.0 max.
A2B
B2B
N2A
DE2E3KY102MpppM01
250
E
1000 ±20%
7 max.
5.0
5.0 max.
A2B
B2B
N2A
DE2E3KY152MpppM01
250
E
1500 ±20%
7 max.
5.0
5.0 max.
A2B
B2B
N2A
DE2E3KY222MpppM01
250
E
2200 ±20%
8 max.
5.0
5.0 max.
A2B
B2B
N2A
DE2E3KY332MpppM01
250
E
3300 ±20%
9 max.
5.0
5.0 max.
A2B
B2B
N2A
DE2E3KY472MpppM01
250
E
4700 ±20%
10 max.
5.0
5.0 max.
A2B
B2B
N2A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Individual specification code "M01" expresses "simplicity marking and guarantee of dielectric strength between lead wires: AC2000V".
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KY) and capacitance of products
in the parts list when it is required for applying safety standard of electric equipment.
5
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors
Type KH (Basic Insulation) -IEC60384-14 Class X1, Y22
D max.
T max.
e
25.0 min.
1. Operating temperature range guaranteed up to 125
degrees (UL: 85 deg.).
2. Dielectric strength: AC2600V
3. Class X1/Y2 capacitors which are certified by
UL/CSA/VDE/BSI/SEMKO/DEMKO/FIMKO/NEMKO/ESTI/
NSW.
4. Coated with flame-retardant epoxy resin (conforming
to UL94V-0 standard).
5. Cost-saving automatic insertion available.
3.0 max.
■ Features
F±1.0
ød
(in mm)
[Bulk]
Vertical Crimp Long (A3)
Lead Code
Coating Extension e
ød
A3
Up to the end of crimp
0.6±0.05
■ Applications
■ Standard Certification
UL
CSA
VDE
BSI
Standard No.
UL1414
E384-14
IEC 60384-14
EN 60384-14
EN 60065 (8.8, 14.2)
IEC 60384-14
EN 60384-14
SEMKO
DEMKO
FIMKO
NEMKO
ESTI
IEC 60384-14
EN 60384-14
NSW
IEC 60384-14
AS3250
e
ød
F±0.8
(in mm)
[Bulk]
Vertical Crimp Short (B3)
Lead Code
Coating Extension e
ød
B3
Up to the end of crimp
0.6±0.05
■ Marking
Certified No.
Item
Example
Rated Voltage
E37921
1343805
40002796
KH
w Nominal Capacitance
(Marked with 3 figures)
r Company Name Code
8 : Made in Taiwan
15 : Made in Thailand
KM 37901
812163
314578
24195
P08209182
08.0708
q Type Designation
e Capacitance Tolerance
w
AC250V(r.m.s.)
6529
• The certification number might change by the revision of the application
standard and the change within the range of acquisition.
• Please contact us when the certification of Chinese Safety Standard or South
Korean Safety Standard is necessary.
6
T max.
5.0±1.0
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
D max.
3.0 max.
Ideal for use as X/Y capacitors for AC line filter and
primary-secondary coupling on switching power supplies
and AC adapters.
q
KH472M
X1Y2
BSI
FI
MJ502
250~
8
N 65
D
t Manufactured Date Code
UL Approval Mark
CSA Approval Mark
r
VDE Approval Mark
t
BSI Approval Mark
SEMKO Approval Mark
DEMKO Approval Mark
FIMKO Approval Mark
NEMKO Approval Mark
ESTI Approval Mark
Class Code
Rated Voltage Mark
e
BSI
D
FI
N
MJ502
X1Y2
250~
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
AC Rated
Voltage
(Vac)
Temp.
Char.
Capacitance
(pF)
Body
Dia. D
(mm)
Lead
Spacing F
(mm)
Body
Thickness T
(mm)
Lead
Package
Long Bulk
Lead
Package
Short Bulk
Lead
Package
Taping (1)
DE2B3KH101Kppp
250
B
100 ±10%
8 max.
7.5
7.0 max.
A3B
B3B
N3A
DE2B3KH151Kppp
250
B
150 ±10%
8 max.
7.5
7.0 max.
A3B
B3B
N3A
DE2B3KH221Kppp
250
B
220 ±10%
8 max.
7.5
7.0 max.
A3B
B3B
N3A
DE2B3KH331Kppp
250
B
330 ±10%
8 max.
7.5
7.0 max.
A3B
B3B
N3A
DE2B3KH471Kppp
250
B
470 ±10%
8 max.
7.5
7.0 max.
A3B
B3B
N3A
DE2B3KH681Kppp
250
B
680 ±10%
9 max.
7.5
7.0 max.
A3B
B3B
N3A
DE2E3KH102Mppp
250
E
1000 ±20%
8 max.
7.5
7.0 max.
A3B
B3B
N3A
DE2E3KH152Mppp
250
E
1500 ±20%
9 max.
7.5
7.0 max.
A3B
B3B
N3A
DE2E3KH222Mppp
250
E
2200 ±20%
10 max.
7.5
7.0 max.
A3B
B3B
N3A
DE2E3KH332Mppp
250
E
3300 ±20%
12 max.
7.5
7.0 max.
A3B
B3B
N3A
DE2E3KH472Mppp
250
E
4700 ±20%
13 max.
7.5
7.0 max.
A3B
B3B
N3A
DE2F3KH103Mppp
250
F
10000 ±20%
16 max.
7.5
7.0 max.
A3B
B3B
N7A
Part Number
2
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KH) and capacitance of products
in the parts list when it is required for applying safety standard of electric equipment.
7
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors
Type KX Small Size (Reinforced Insulation) -IEC60384-14 Class X1, Y1D max.
T max.
e
25.0 min.
F±1.0
ød
(in mm)
[Bulk]
Vertical Crimp Long (A4)
Lead Code
Coating Extension e
ød
A4
Up to the end of crimp
0.6±0.05
D max.
T max.
3.0 max.
1. We design capacitors in much more compact size than
current Type KX, having reduced the diameter
by 20% max.
2. Operating temperature range guaranteed up to 125
degrees (UL: 85 deg.).
3. Dielectric strength: AC4000V
4. Class X1/Y1 capacitors which are certified by
UL/CSA/VDE/BSI/SEMKO/DEMKO/FIMKO/NEMKO/ESTI/
IMQ.
5. Possible to use with a component in appliance
requiring reinforced insulation and double
insulation based on UL1492, IEC60065 and IEC60950.
6. Coated with flame-retardant epoxy resin (conforming
to UL94V-0 standard).
7. Cost-saving automatic insertion available.
e
■ Applications
1. Ideal for use as X/Y capacitors for AC line filter
and primary-secondary coupling on switching power
supplies and AC adapters.
2. Ideal for use on D-A isolation and noise absorption
for DAA modems without transformers.
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
*: Small sized Type KX differs from current Type KX
in electrical characteristics, such as the voltage
dependency, of capacitance temperature dependecy,
and Dielectric strength.
Therefore, before replacing current Type KX,
please make a performance check by equipment.
Please refer below too.
[Notice(Rating)
item 2. "Performance Check by Equipment".]
8
5.0±1.0
3
3.0 max.
■ Features
ød
F±0.8
(in mm)
[Bulk]
Vertical Crimp Short (B4)
Lead Code
Coating Extension e
ød
B4
Up to the end of crimp
0.6±0.05
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Standard Certification
UL
CSA
VDE
BSI
SEMKO
DEMKO
FIMKO
NEMKO
ESTI
IMQ
■ Marking
Standard No.
Certified No.
UL1414
E384-14
IEC 60384-14
EN 60384-14
EN 60065 (8.8, 14.2)
IEC 60384-14
EN 60384-14
E37921
1343810
Example
Rated Voltage
q Type Designation KX
40002831
w
q
KM 37901
AC250V(r.m.s.)
t
812158
314577
24191
P08209173
08.0707
V4069
IEC 60384-14
EN 60384-14
EN 60384-14
Item
472M
KX250~
X1 Y1
65
8
e
w Nominal Capacitance
(Marked with 3 figures)
e Capacitance Tolerance
r Company Name Code
8 : Made in Taiwan 15 : Made in Thailand
r
t Manufactured Date Code
Class Code
X1Y1
Rated Voltage Mark
250~
• The certification number might change by the revision of the application
standard and the change within the range of acquisition.
• Please contact us when the certification of Chinese Safety Standard or South
Korean Safety Standard is necessary.
Part Number
AC Rated
Voltage
(Vac)
Temp.
Char.
Capacitance
(pF)
Body
Dia. D
(mm)
Lead
Spacing F
(mm)
Body
Thickness T
(mm)
Lead
Package
Long Bulk
Lead
Package
Short Bulk
Lead
Package
Taping (1)
DE1B3KX101KpppL01
250
B
100 ±10%
8 max.
10.0
7.0 max.
A4B
B4B
N4A
DE1B3KX151KpppL01
250
B
150 ±10%
8 max.
10.0
7.0 max.
A4B
B4B
N4A
DE1B3KX221KpppL01
250
B
220 ±10%
8 max.
10.0
7.0 max.
A4B
B4B
N4A
DE1B3KX331KpppL01
250
B
330 ±10%
8 max.
10.0
7.0 max.
A4B
B4B
N4A
DE1B3KX471KpppL01
250
B
470 ±10%
8 max.
10.0
7.0 max.
A4B
B4B
N4A
DE1B3KX681KpppL01
250
B
680 ±10%
9 max.
10.0
7.0 max.
A4B
B4B
N4A
DE1E3KX102MpppL01
250
E
1000 ±20%
7 max.
10.0
7.0 max.
A4B
B4B
N4A
DE1E3KX152MpppL01
250
E
1500 ±20%
8 max.
10.0
7.0 max.
A4B
B4B
N4A
DE1E3KX222MpppL01
250
E
2200 ±20%
9 max.
10.0
7.0 max.
A4B
B4B
N4A
DE1E3KX332MpppL01
250
E
3300 ±20%
10 max.
10.0
7.0 max.
A4B
B4B
N4A
DE1E3KX472MpppL01
250
E
4700 ±20%
12 max.
10.0
7.0 max.
A4B
B4B
N4A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KX) and capacitance of products
in the parts list when it is required for applying safety standard of electric equipment.
9
3
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors
Type KX (Reinforced Insulation) -IEC60384-14 Class X1, Y1D max.
T max.
25.0 min.
e
F±1.0
ød
(in mm)
[Bulk]
Vertical Crimp Long (A5)
Lead Code
Coating Extension e
ød
A5
Up to the end of crimp
0.6±0.1
0.05
D max.
T max.
Ideal for use as X/Y capacitors for AC line filter and
primary-secondary coupling on switching power supplies
and AC adapters.
4.0 max.
■ Applications
e
5.0±1.0
4
1. Operating temperature range guaranteed up to 125
degrees (UL: 85 deg.).
2. Dielectric strength: AC4000V
3. Class X1/Y1 capacitors which are certified by
UL/CSA/VDE/BSI/SEMKO/DEMKO/FIMKO/NEMKO/ESTI/
IMQ.
4. Possible to use with a component in appliance
requiring reinforced insulation and double
insulation based on UL1492, IEC60065 and IEC60950.
5. Coated with flame-retardant epoxy resin (conforming
to UL94V-0 standard).
6. Cost-saving automatic insertion available.
4.0 max.
■ Features
ød
F±0.8
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
■ Standard Certification
UL
CSA
VDE
BSI
SEMKO
DEMKO
FIMKO
NEMKO
ESTI
IMQ
Certified No.
UL1414
E384-14
IEC 60384-14
EN 60384-14
EN 60065 (8.8, 14.2)
IEC 60384-14
EN 60384-14
E37921
1343810
EN 60384-14
Coating Extension e
ød
B5
Up to the end of crimp
0.6±0.1
0.05
Item
q Type Designation
Example
Rated Voltage
KX
w Nominal Capacitance
(Under 100pF: Actual value, 100pF and over: Marked with 3 figures)
40002831
e Capacitance Tolerance
r Company Name Code
8 : Made in Taiwan
15 : Made in Thailand
w
KM 37901
AC250V(r.m.s.)
812158
314577
24191
P08209173
08.0707
V4069
• The certification number might change by the revision of the application
standard and the change within the range of acquisition.
• Please contact us when the certification of Chinese Safety Standard or South
Korean Safety Standard is necessary.
10
Lead Code
■ Marking
Standard No.
IEC 60384-14
EN 60384-14
(in mm)
[Bulk]
Vertical Crimp Short (B5)
q
t Manufactured Date Code
UL Approval Mark
CSA Approval Mark
FI
VDE Approval Mark
MJ502
N
BSI Approval Mark
8 r
SEMKO Approval Mark
250~ D 65 t
DEMKO Approval Mark
FIMKO Approval Mark
NEMKO Approval Mark
ESTI Approval Mark
IMQ Approval Mark
Class Code
Rated Voltage Mark
KX222M
X1Y1
BSI
e
BSI
D
FI
N
MJ502
X1Y1
250~
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
AC Rated
Voltage
(Vac)
Temp.
Char.
Capacitance
(pF)
Body
Dia. D
(mm)
Lead
Spacing F
(mm)
Body
Thickness T
(mm)
Lead
Package
Long Bulk
Lead
Package
Short Bulk
Lead
Package
Taping (1)
DE11XKX100Jppp
250
SL
10 ±5%
9 max.
10.0
8.0 max.
A5B
B5B
N5A
DE11XKX150Jppp
250
SL
15 ±5%
9 max.
10.0
8.0 max.
A5B
B5B
N5A
DE11XKX220Jppp
250
SL
22 ±5%
9 max.
10.0
8.0 max.
A5B
B5B
N5A
DE11XKX330Jppp
250
SL
33 ±5%
9 max.
10.0
8.0 max.
A5B
B5B
N5A
DE11XKX470Jppp
250
SL
47 ±5%
9 max.
10.0
8.0 max.
A5B
B5B
N5A
DE11XKX680Jppp
250
SL
68 ±5%
9 max.
10.0
8.0 max.
A5B
B5B
N5A
DE1B3KX101Kppp
250
B
100 ±10%
9 max.
10.0
8.0 max.
A5B
B5B
N5A
DE1B3KX151Kppp
250
B
150 ±10%
9 max.
10.0
8.0 max.
A5B
B5B
N5A
DE1B3KX221Kppp
250
B
220 ±10%
9 max.
10.0
8.0 max.
A5B
B5B
N5A
DE1B3KX331Kppp
250
B
330 ±10%
9 max.
10.0
8.0 max.
A5B
B5B
N5A
DE1B3KX471Kppp
250
B
470 ±10%
9 max.
10.0
8.0 max.
A5B
B5B
N5A
DE1B3KX681Kppp
250
B
680 ±10%
10 max.
10.0
8.0 max.
A5B
B5B
N5A
DE1E3KX102MpppA01
250
E
1000 ±20%
8 max.
10.0
8.0 max.
A5B
B5B
N5A
DE1E3KX152MpppA01
250
E
1500 ±20%
9 max.
10.0
8.0 max.
A5B
B5B
N5A
DE1E3KX222MpppA01
250
E
2200 ±20%
10 max.
10.0
8.0 max.
A5B
B5B
N5A
DE1E3KX332MpppA01
250
E
3300 ±20%
12 max.
10.0
8.0 max.
A5B
B5B
N5A
DE1E3KX392MpppA01
250
E
3900 ±20%
13 max.
10.0
8.0 max.
A5B
B5B
N5A
DE1E3KX472MpppA01
250
E
4700 ±20%
15 max.
10.0
8.0 max.
A5B
B5B
N5A
Part Number
4
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KX) and capacitance of products
in the parts list when it is required for applying safety standard of electric equipment.
11
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Type
KY/KH/KXand
Specifications
and Test Methods
Specifications
Test Methods
Apply to Type KY/KH/KX
Operating Temperature Range: -25 to +125°C (-25 to +85°C in case of the standard of UL)
No.
1
4
Specifications
Item
Appearance and Dimensions
No marked defect on appearance form and
dimensions are within specified range.
The capacitor should be visually inspected.
2
Marking
To be easily legible
3
Capacitance
Within specified tolerance
4
Dissipation Factor (D.F.)
Q
Char.
B, E
F
SL
5
Insulation Resistance (I.R.)
Test Method
The capacitor should be visually inspected for evidence of
defect.
Dimensions should be measured with slide calipers.
Specifications
D.F.V2.5%
D.F.V5.0%
QU400+20C*1(CF30pF)
QU1000
(CU30pF)
The capacitance, dissipation factor and Q should be measured
at 20˚C with 1±0.1kHz (char. SL: 1±0.1MHz) and AC5V(r.m.s.)
max.
The insulation resistance should be measured with
DC500±50V within 60±5 sec. of charging.
The voltage should be applied to the capacitor through a
resistor of 1MΩ.
10000MΩ min.
The capacitor should not be damaged when test voltages of
Table 1 are applied between the lead wires for 60 sec.
Type
Between Lead
No failure
Wires
KY
KH
KX
6
First, the terminals of the capacitor
should be connected together. Then,
as shown in figure at right, a metal
foil should be closely wrapped around
Metal
the body of the capacitor to the
about
Foil
distance of about 3 to 4mm from
3 to 4mm
each terminal.
Metal
Then, the capacitor should be inserted
Balls
into a container filled with metal balls
of about 1mm diameter. Finally, AC
voltage of Table 2 is applied for 60 sec. between the capacitor
lead wires and metal balls.
Dielectric
Strength
Body
Insulation
Test Voltage
In case of lead spacing F=5mm AC2000V(r.m.s.)
In case of lead spacing F=7.5mm AC2600V(r.m.s.)
AC2600V(r.m.s.)
AC4000V(r.m.s.)
No failure
Type
KY
KH
KX
7
Temperature Characteristics
Capacitance Change
Char.
B
Within ±10%
E
Within +20
-55%
F
Within +30
-80%
(Temp. range: -25 to +85°C)
Char.
SL
Temperature Coefficient
+350 to -1000ppm/°C
(Temp. range: +20 to +85°C)
8
Solderability of Leads
Lead wire should be soldered with uniform coating
on the axial direction over 3/4 of the circumferential
direction.
Test Voltage
AC2600V(r.m.s.)
AC2600V(r.m.s.)
AC4000V(r.m.s.)
The capacitance measurement should be made at each step
specified in Table 3.
Step
1
2
3
4
5
Temperature (ºC)
20±2
-25±2
20±2
85±2
20±2
The lead wire of a capacitor should be dipped into molten
solder for 2±0.5 sec.
The depth of immersion is up to about 1.5 to 2.0mm from the
root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
*1 "C" expresses nominal capacitance value (pF).
Continued on the following page.
12
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Type KY/KH/KX Specifications and Test Methods
Continued from the preceding page.
No.
9
10
11
Specifications
Item
Soldering
Effect
(Non-Preheat)
Appearance
No marked defect
Capacitance
Change
Within ±10%
I.R.
1000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
Capacitance
Change
Within ±10%
I.R.
1000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
Capacitance
Within the specified tolerance
Soldering
Effect
(On-Preheat)
Vibration
Resistance
D.F.
Q
Char.
B, E
F
SL
12
Humidity
(Under
Steady
State)
Appearance
No marked defect
Capacitance
Change
Char.
B
E, F
SL
Capacitance Change
Within ±10%
Within ±15%
Within ± 5%
Char.
B, E
F
Specifications
D.F.V5.0%
D.F.V7.5%
QU275+5/2C*1(CF30pF)
QU350
(CU30pF)
D.F.
Q
SL
13
Humidity
Loading
Specifications
D.F.V2.5%
D.F.V5.0%
QU400+20C*1(CF30pF)
QU1000
(CU30pF)
I.R.
3000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
Capacitance
Change
Char.
B
E, F
SL
Capacitance Change
Within ±10%
Within ±15%
Within ± 5%
Char.
B, E
F
Specifications
D.F.V5.0%
D.F.V7.5%
QU275+5/2C*1(CF30pF)
QU350
(CU30pF)
D.F.
Q
SL
I.R.
3000MΩ min.
Dielectric
Strength
Per Item 6
Test Method
As shown in figure, the lead wires
, Capacitor
should be immersed in solder of Thermal
Screen,
,
350±10°C or 260±5°C up to 1.5
,
,
,,,,,,,,,,
,,,,,,
, 1.5
,,,,,,,,,,
,,,,
,
to 2.0mm from the root of terminal
, to 2.0mm
,
for 3.5±0.5 sec. (10±1 sec. for
,,,Molten
260±5°C).
Solder
Pre-treatment:
Capacitor should be stored at 85±2°C for 1 hr., then placed at
room condition*2 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*2.
First the capacitor should be
, Capacitor
Thermal
stored at 120+0/-5°C for
Screen,
,
60+0/-5 sec.
,
,
,,,,,,,,,,
, 1.5
,,,,,,
,,,,,,,,,,
,,,,
,
Then, as in figure, the lead wires
, to 2.0mm
,
should be immersed in solder of
,,,Molten
260+0/-5°C up to 1.5 to 2.0mm
Solder
from the root of terminal for
7.5+0/-1 sec.
Pre-treatment:
Capacitor should be stored at 85±2°C for 1 hr., then placed at
room condition*2 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*2.
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1 minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz.
Apply for a total of 6 hrs., 2 hrs. each in 3 mutually
perpendicular directions.
Set the capacitor for 500±12 hrs. at 40±2°C in 90 to 95%
relative humidity.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*2.
Apply the rated voltage for 500±12 hrs. at 40±2°C in 90 to 95%
relative humidity.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*2.
*1 "C" expresses nominal capacitance value (pF).
*2 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
13
4
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Type
KY/KH/KXand
Specifications
and Test Methods
Specifications
Test Methods
Continued from the preceding page.
No.
Specifications
Item
Appearance
No marked defect
Capacitance
Change
Within ±20%
I.R.
3000MΩ min.
Test Method
Impulse Voltage
Each individual capacitor should be subjected to a 5kV (Type
KX: 8kV) impulses for three times. After the capacitors are
applied to life test.
100 (%)
90
Front time (T1) =1.2µs=1.67T
Time to half-value (T2) =50µs
50
30
0
14
Life
T2
Dielectric
Strength
Apply a voltage of Table 4 for 1000 hrs. at 125+2/-0°C, and
relative humidity of 50% max.
Per Item 6
Applied Voltage
AC425V(r.m.s.), except that once each hour the voltage
is increased to AC1000V(r.m.s.) for 0.1 sec.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*2.
The capacitor should be subjected to applied flame for 15 sec.
and then removed for 15 sec. until 5 cycles are completed.
The capacitor flame discontinues as follows.
15
Cycle
1 to 4
5
Flame Test
Capacitor
Flame
76
Time (sec.)
30 max.
60 max.
7
12
38
20°
4
t
T
T1
Gas Burner: Inside Dia. 9.5
Tensile
16
Robustness
of
Terminations
Lead wire should not be cut off. Capacitor should
not be broken.
As shown in the figure at right, fix the body
of the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N and keep
it for 10±1 sec.
(in mm)
W
Each lead wire should be subjected to 5N weight and then a
90° bend, at the point of egress, in one direction, return to
original position, and then apply a 90° bend in the opposite
direction at the rate of one bend in 2 to 3 sec.
Bending
The capacitor should be individually wrapped in at least one but
not more than two complete layers of cheesecloth. The
capacitor should be subjected to 20 discharges. The interval
between successive discharges should be 5 sec. The UAC
should be maintained for 2 min. after the last discharge.
F
S1
Tr
S2
C1
UAC
L1
C2
L3
R
L2
C3
Cx
Ct
Ut
L4
Oscilloscope
17
Active Flammability
The cheese-cloth should not be on fire.
C1,2
L1 to 4
Ct
Cx
F
: 1µF±10%
C3
: 0.033µF±5% 10kV
: 1.5mH±20% 16A Rod core choke
: 3µF±5% 10kV
R
: 100Ω±2%
: Capacitor under test
UAC
: UR±5%
: Fuse, Rated 10A
UR
: Rated Voltage
Ut
: Voltage applied to Ct
Ux
5kV
time
*2 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
14
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test MethodsType KY/KH/KX Specifications and Test Methods
Continued from the preceding page.
No.
Passive Flammability
The burning time should not exceed 30 sec.
The tissue paper should not ignite.
Test Method
The capacitor under test should be held in the flame in the
position which best promotes burning. Each specimen should
only be exposed once to the flame. Time of exposure to flame:
30 sec.
Length of flame : 12±1mm
Gas burner
: Length 35mm min.
Inside Dia. 0.5±0.1mm
Outside Dia. 0.9mm max.
Gas
: Butane gas Purity 95% min.
Test Specimen
4
200T5mm
About 8mm
18
Specifications
Item
45°
Tissue
About 10mm Thick Board
19
Temperature
and
Immersion
Cycle
Appearance
No marked defect
Capacitance
Change
Char.
B
E, F
SL
Capacitance Change
Within ±10%
Within ±20%
Within ± 5%
Char.
B, E
F
Specifications
D.F.V5.0%
D.F.V7.5%
QU275+5/2C*1(CF30pF)
QU350
(CU30pF)
D.F.
Q
SL
I.R.
Dielectric
Strength
3000MΩ min.
Per Item 6
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Step
1
2
3
4
Temperature (ºC)
-25+0/-3
Room temp.
125+3/-0
Room temp.
Time (min)
30
3
30
3
Cycle time: 5 cycle
Step
Temperature (ºC)
Time
(min)
1
65+5/-0
15
2
0±3
15
Immersion
Water
Clean
water
Salt
water
Cycle time: 2 cycle
Pre-treatment:
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
room condition*2 for 24±2 hrs.
Post-treatment:
Capacitor should be stored for 24±2 hrs. at room condition*2.
*1 "C" expresses nominal capacitance value (pF).
*2 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
15
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors
DEJ Series -Based on the Electrical Appliance and Material Safety Law of Japan■ Features
1. Coated with flame-retardant epoxy resin (conforming
to UL94V-0 standard).
2. Cost-saving automatic insertion available.
3. This type is based on the electrical appliance and
material safety law of Japan (separated table 4).
T max.
T max.
3.0 max.
D max.
25.0 min.
25.0 min.
e
F±1.0
ød
(in mm)
■ Applications
A3
Fig. 1
0.6±0.05
Fig. 2
3.0 max.
C3
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
Style
Up to the end of crimp 0.6±0.05
D max.
T max.
T max.
ød
5.0±1.0
e
5.0±1.0
[Bulk]
Vertical Crimp Long (A3)
Straight Long (C3)
ød
3.0 max.
Ideal for use on AC line filter and primary-secondary
coupling for switching power supplies and AC adapters.
F±0.8
■ Marking
(in mm)
Lead Code Coating Extension e
Temp. Char.
Nominal
Body Diameter
5
Lead Code Coating Extension e
[Bulk]
Vertical Crimp Short (B3)
Straight Short (D3)
E, F
ø7-8mm
102Z
250~
65
ø9-11mm
332Z
250~
65
Nominal Capacitance
Marked with 3 figures
Capacitance Tolerance
Marked with code
Rated Voltage
Marked with code
Manufacturer's
Identification
Marked with
(omitted for nominal body diameter ø8mm and under)
Manufactured Date Code
Abbreviation
Part Number
AC Rated
Voltage
(Vac)
Temp.
Char.
Capacitance
(pF)
Body
Dia. D
(mm)
Lead
Body
Spacing F Thickness T
(mm)
(mm)
DEJE3E2102Zppp
250
E
1000 +80/-20%
7 max.
7.5
DEJE3E2222Zppp
250
E
2200 +80/-20%
8 max.
7.5
DEJE3E2332Zppp
250
E
3300 +80/-20%
9 max.
DEJE3E2472Zppp
250
E
4700 +80/-20% 11 max.
DEJF3E2472Zppp
250
F
4700 +80/-20%
DEJF3E2103Zppp
250
F
B3
Style
Up to the end of crimp 0.6±0.05
Fig. 1
0.6±0.05
Fig. 2
3.0 max.
D3
Lead
Package
Long Bulk
Lead
Package
Short Bulk
Lead
Package
Taping (1)
4.0 max.
C3B
D3B
N2A
P3A
4.0 max.
A3B
B3B
N2A
N3A
7.5
4.0 max.
A3B
B3B
N2A
N3A
7.5
4.0 max.
A3B
B3B
N2A
N3A
8 max.
7.5
4.0 max.
A3B
B3B
N2A
N3A
10000 +80/-20% 11 max.
7.5
4.0 max.
A3B
B3B
N2A
N3A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Taping (1): Lead spacing F=5.0mm, Taping (2): Lead spacing F=7.5mm.
16
ød
Lead
Package
Taping (2)
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEJ Series Specifications and Test Methods
! Apply to DEJ Series (Products which are based on the electrical appliance and material safety law of Japan)
Operating Temperature Range: -25 to +85°C
No.
Specifications
Item
Test Method
The capacitor should be visually inspected for evidence of
defect.
Dimensions should be measured with slide calipers.
1
Appearance and Dimensions
No marked defect on appearance form and
dimensions are within specified range.
2
Marking
To be easily legible
The capacitor should be visually inspected.
Within specified tolerance
The capacitance should be measured at 20˚C with 1±0.1kHz
and AC5V(r.m.s.) max.
3
Capacitance
4
Dissipation Factor
(D.F.)
5
Insulation Resistance (I.R.)
6
Dielectric
Strength
Specifications
D.F.V2.5%
D.F.V5.0%
Char.
E
F
The dissipation factor should be measured at 20˚C with
1±0.1kHz and AC5V(r.m.s.) max.
The insulation resistance should be measured with
DC500±50V within 60±5 sec. of charging.
10000MΩ min.
5
Between Lead
No failure
Wires
The capacitor should not be damaged when AC1500V(r.m.s.)
are applied between the lead wires for 60 sec.
Body
Insulation
First, the terminals of the capacitor should be connected
together. Then, as shown in figure at right,
the capacitor should be immersed
into 10% salt solution up to a position
About
of about 3 to 4mm apart from the
3 to 4mm
terminals.
Electrode
Finally, AC1500V(r.m.s.) is applied
Plate
for 60 sec. between the capacitor lead
10% Salt Solution
wires and electrode plate.
No failure
The capacitance measurement should be made at each step
specified in Table 1.
7
Temperature Characteristics
Char.
E
F
Capacitance Change
Within +20
-55%
Within +30
-80%
Appearance
No marked defect
I.R.
1000MΩ min.
Temperature (ºC)
20±2
-25±2
20±2
85±2
20±2
Step
1
2
3
4
5
As in Figure 1, discharge is made 50 times at 5 sec. intervals
from the capacitor (Cd) charged at DC voltage of specified.
R3
S
R1
Vs
Cd
8
Discharge
Test
Dielectric
Strength
Solderability of Leads
Ct: Capacitor under test
S: High-voltage switch
R1: 1000Ω
Lead wire should be soldered with uniform coating
on the axial direction over 3/4 of the circumferential
direction.
R2
Fig.1
Per Item 6
Cd
Vs
9
Ct
R2: 100MΩ
R3: Surge resistance
0.001µF
DC10kV
The lead wire of a capacitor should be dipped into molten
solder for 2±0.5 sec.
The depth of immersion is up to about 1.5 to 2.0mm from the
root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
Continued on the following page.
17
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEJ Series Specifications and Test Methods
Continued from the preceding page.
No.
10
5
11
12
Soldering
Effect
(Non-Preheat)
Soldering
Effect
(On-Preheat)
No marked defect
I.R.
1000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
I.R.
1000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
Capacitance
Within the specified tolerance
Vibration
Resistance
14
15
Solvent
Resistance
Humidity
(Under
Steady
State)
Humidity
Insulation
Char.
E
F
First the capacitor should be
, Capacitor
Thermal
stored at 120+0/-5°C for
Screen,
,
,
,
60+0/-5 sec.
,,,,,,,,,,
, 1.5
,,,,,,
,,,,,,,,,,
,,,,
,
Then, as in figure, the lead wires
, to 2.0mm
, Molten
should be immersed in solder of
,,,
Solder
260+0/-5°C up to 1.5 to 2.0mm
from the root of terminal for
7.5+0/-1 sec.
Pre-treatment:
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 4 to 24 hrs. at
room condition*1.
Specifications
D.F.V2.5%
D.F.V5.0%
No marked defect
Appearance
No marked defect
Capacitance
Change
Char.
E
F
Capacitance Change
Within ±20%
Within ±30%
D.F.
Char.
E
F
Specifications
D.F.V5.0%
D.F.V7.5%
I.R.
1000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
Capacitance
Change
Char.
E
F
Capacitance Change
Within ±20%
Within ±30%
D.F.
Char.
E
F
Specifications
D.F.V5.0%
D.F.V7.5%
1000MΩ min.
Dielectric
Strength
Per Item 6
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1 minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz.
Apply for a total of 6 hrs., 2 hrs. each in 3 mutually perpendicular
directions.
The capacitor should be immersed into a isopropyl alcohol for
30±5 sec.
Appearance
I.R.
Test Method
As shown in figure, the lead wires
, Capacitor
Thermal
should be immersed in solder of
Screen,
,
,
,
350±10˚C up to 1.5 to 2.0mm from
,,,,,,,,,,
,,,,,,
, 1.5
,,,,,,,,,,
,,,,
,
the root of terminal for 3.5±0.5 sec.
, to 2.0mm
,
Pre-treatment:
,,,Molten
Solder
Capacitor should be stored at
85±2˚C for 1 hr., then placed at room condition*1 for 24±2 hrs.
before initial measurements.
Post-treatment:
Capacitor should be stored for 4 to 24 hrs. at
room condition*1.
Appearance
D.F.
13
Specifications
Item
Set the capacitor for 500±12 hrs. at 40±2˚C in 90 to 95%
relative humidity.
Pre-treatment:
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
The capacitor should be subjected to 40±2˚C, relative humidity
of 90 to 98% for 8 hrs., and then removed in room temperature
for 16 hrs. until 5 cycles.
Pre-treatment:
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
18
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEJ Series Specifications and Test Methods
Continued from the preceding page.
16
17
Specifications
Item
Humidity
Loading
Life
Appearance
No marked defect
Capacitance
Change
Char.
E
F
Capacitance Change
Within ±20%
Within ±30%
D.F.
Char.
E
F
Specifications
D.F.V5.0%
D.F.V7.5%
I.R.
1000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
Capacitance
Change
Char.
E
F
I.R.
Dielectric
Strength
Capacitance Change
Within ±20%
Within ±30%
1000MΩ min.
Per Item 6
Cycle
1 to 2
3
Flame Test
Apply the rated voltage for 500±12 hrs. at 40±2˚C in 90 to 95%
relative humidity.
Pre-treatment:
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
Apply a voltage of Table 2 for 1500 hrs. at 85±2˚C, relative
humidity 50% max.
Applied Voltage
AC500V(r.m.s.), except that once each hour the voltage
is increased to AC1000V(r.m.s.) for 0.1 sec.
Time (sec.)
15 max.
60 max.
The capacitor should be subjected
to applied flame for 15 sec. and then
removed for 15 sec. until 3 cycles
are completed.
20
(in mm)
W
Lead wire should not be cut off. Capacitor should
not be broken.
Each lead wire should be subjected to 5N weight and then a
90° bend, at the point of egress, in one direction, return to
original position, and then apply a 90° bend in the opposite
direction at the rate of one bend in 2 to 3 sec.
Bending
Temperature
and
Immersion
Cycle
7
38
As shown in figure at right, fix the body of
capacitor, apply a tensile weight gradually to
each lead wire in the radial direction of capacitor
up to 10N and keep it for 10±1 sec.
Tensile
19
Capacitor
Flame
76
12
Gas Burner: Inside Dia. 9.5
Robustness
of
Terminations
5
Pre-treatment:
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 4 to 24 hrs. at room condition*1.
The capacitor flame discontinued as follows.
18
Test Method
20°
No.
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Appearance
No marked defect
Capacitance
Change
Char.
E
F
Capacitance Change
Within ±20%
Within ±30%
D.F.
Char.
E
F
Specifications
D.F.V5.0%
D.F.V7.5%
I.R.
Temperature (ºC)
-25+0/-3
Room temp.
85+3/-0
Room temp.
Step
1
2
3
4
Time (min)
30
3
30
3
Cycle time: 5 cycle
1000MΩ min.
Dielectric
Strength
Step
Temperature (ºC)
Time
(min)
1
65+5/-0
15
2
0±3
15
Per Item 6
Immersion
Water
Clean
water
Salt
water
Cycle time: 2 cycle
Pre-treatment:
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
room condition*1 for 24±2 hrs.
Post-treatment:
Capacitor should be stored for 4 to 24 hrs. at room condition*1.
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
19
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Characteristics Data (Typical Example)
■ Capacitance - Temperature Characteristics
40
20
SL
Cap. Change (%)
0
B
B
SL
-20
-40
E
-60
F
E
-80
F
-100
-40
-20
0
20
5
40
60
80
100
120
140
Temperature (°C)
■ Insertion Loss - Frequency Characteristics
Type KY
Type KH
0
Signal power: 1mW
AC240V(r.m.s.) / 60Hz is
applied on the capacitor.
(1) DE2B3KY101KA2BM01
(2) DE2B3KY221KA2BM01
(3) DE2B3KY471KA2BM01
(4) DE2E3KY102MA2BM01
(5) DE2E3KY222MA2BM01
(6) DE2E3KY472MA2BM01
(7) DE2F3KY103MA3BM02
20
(1)
30
(3)
(5) (4)
(2)
(6)
40
Type KH
Signal power: 1mW
AC240V(r.m.s.) / 60Hz is
applied on the capacitor.
10
Insertion Loss (dB)
10
Insertion Loss (dB)
0
Type KY
(1)
30
(5)
(4)
(2)
(3)
(6)
40
(7)
(7)
50
50
1
10
100
1
1000
10
100
Type KX Small Size
Type KX
0
0
Type KX Small Size
Signal power: 1mW
AC240V(r.m.s.) / 60Hz is
applied on the capacitor.
(1) DE1B3KX101KA4BL01
(2) DE1B3KX221KA4BL01
(3) DE1B3KX471KA4BL01
(4) DE1E3KX102MA4BL01
(5) DE1E3KX222MA4BL01
(6) DE1E3KX472MA4BL01
20
(3)
(2)
(1)
(4)
Signal power: 1mW
AC240V(r.m.s.) / 60Hz is
applied on the capacitor.
(1) DE1B3KX101KA5B
(2) DE1B3KX221KA5B
(3) DE1B3KX471KA5B
(4) DE1E3KX102MA5BA01
(5) DE1E3KX222MA5BA01
(6) DE1E3KX472MA5BA01
20
(1)
(2)
30
(5)
40
Type KX
10
Insertion Loss (dB)
10
30
1000
Frequency (MHz)
Frequency (MHz)
Insertion Loss (dB)
(1) DE2B3KH101KA3B
(2) DE2B3KH221KA3B
(3) DE2B3KH471KA3B
(4) DE2E3KH102MA3B
(5) DE2E3KH222MA3B
(6) DE2E3KH472MA3B
(7) DE2F3KH103MA3B
20
(6)
(4)
(3)
(5)
(6)
40
50
1
10
100
Frequency (MHz)
20
1000
1
10
100
Frequency (MHz)
1000
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Characteristics Data (Typical Example)
■ Leakage Current Characteristics
Type KY (E,F char.)
Type KY (B char.)
AC voltage : 60Hz
Temperature : 25°C
AC voltage : 60Hz
Temperature : 25°C
6.0
Leakage current [mA(r.m.s.)]
Leakage current [mA(r.m.s.)]
1.0
0.8
0.6
1
BM0
KA2
Y471
3K
E2B
D
0.4
1K
2
3KY2
DE2B
0.2
01
A2BM
2BM01
5.0
DE2
Y1
F3K
3.0
M01
472MA2B
DE2E3KY
2.0
DE2E3KY222MA2BM01
DE2E3KY102MA2BM01
1.0
KA
DE2B3KY101
5
0.0
0.0
0
1000
2000
0
3000
1000
2000
3000
AC voltage [V(r.m.s.)]
AC voltage [V(r.m.s.)]
Type KH (B char.)
Type KH (E, F char.)
AC voltage : 60Hz
Temperature : 25°C
AC voltage : 60Hz
Temperature : 25°C
1.0
6.0
0.8
B
DE2
A3B
Leakage current [mA(r.m.s.)]
Leakage current [mA(r.m.s.)]
M02
A3B
03M
4.0
471K
3KH
0.6
3B
1KA
H22
B3K
DE2
0.4
B
101KA3
E2B3KH
0.2
D
A3B
03M
KH1
F3
DE2
5.0
4.0
3B
72MA
3KH4
DE2E
3.0
2.0
DE2E3KH222
1.0
MA3B
DE2E3KH102MA3B
0.0
0.0
0
1000
2000
3000
0
1000
AC voltage [V(r.m.s.)]
2000
3000
AC voltage [V(r.m.s.)]
Type KX Small Size (B char.)
Type KX Small Size (E char.)
AC voltage : 60Hz
Temperature : 25°C
AC voltage : 60Hz
Temperature : 25°C
1.0
4.0
0.8
71KA
3KX4
DE1B
0.6
01
4BL
1KA
X22
3K
E1B
D
0.4
0.2
L01
01KA4B
1B3KX1
Leakage current [mA(r.m.s.)]
Leakage current [mA(r.m.s.)]
01
A4BL
4BL01
72M
3KX4
DE1E
3.0
2.0
L01
222MA4B
DE1E3KX
1.0
DE1E3KX102MA4BL01
DE
0.0
0.0
0
1000
2000
AC voltage [V(r.m.s.)]
3000
4000
0
1000
2000
3000
4000
AC voltage [V(r.m.s.)]
Continued on the following page.
21
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Characteristics Data (Typical Example)
Continued from the preceding page.
Type KX (B char.)
Type KX (E char.)
AC voltage : 60Hz
Temperature : 25°C
AC voltage : 60Hz
Temperature : 25°C
5
6.0
1.0
X
B3K
DE1
471K
A5B
Leakage current [mA(r.m.s.)]
Leakage current [mA(r.m.s.)]
1.2
0.8
0.6
A5B
221K
3KX
B
DE1
0.4
DE1B3K
0.2
X101KA
5B
0.0
E
DE1
4.0
3.0
5BA01
X222MA
DE1E3K
2.0
BA01
DE1E3KX102MA5
1.0
0.0
0
1000
2000
AC voltage [V(r.m.s.)]
22
5.0
01
5BA
2MA
47
3KX
3000
4000
0
1000
2000
AC voltage [V(r.m.s.)]
3000
4000
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Packaging
Taping Specifications
12.7mm pitch / lead spacing 5mm taping
Vertical crimp type
(Lead Code: N2)
∆S
P2
P
∆S
D
e
P2
P
25.4mm pitch / lead spacing 10.0mm taping
Vertical crimp type
(Lead Code: N4, N5)
R
Item
∗
∗
3.0 max.
4.0 max.
H0
Lead Code
N5
Lead Code
P3
t2
t1
øD0
N5
Code
N2
N3
P3
N7
Pitch of component
P
12.7
15.0
15.0
30.0
25.4
Pitch of sprocket hole
P0
12.7±0.3
15.0±0.3
15.0±0.3
15.0±0.3
12.7±0.3
Lead spacing
F
5.0 +0.8
–0.2
7.5±1.0
7.5±1.0
7.5±1.0
10.0±1.0
Length from hole center to component center
P2
6.35±1.3
7.5±1.5
7.5±1.5
7.5±1.5
—
Length from hole center to lead
P1
3.85±0.7
3.75±1.0
3.75±1.0
3.75±1.0
7.7±1.5
Body diameter
D
Deviation along tape, left or right
∆S
Carrier tape width
W
Position of sprocket hole
W1
Lead distance between reference
H0
N4
See the individual product specifications.
0±1.0
0±2.0
18.0±0.5
9.0±0.5
18.0 +2.0
–0
18.0 +2.0
–0
–
20.0 +1.5
–1.0
–
–
and bottom planes
H
Protrusion length
r
+0.5 to -1.0
Diameter of sprocket hole
øD0
4.0±0.1
Lead diameter
ød
0.6 +0.1
–0.05
0.6±0.05
Total tape thickness
t1
0.6±0.3
Total thickness, tape and lead wire
t2
1.5 max.
Body thickness
T
See the individual product specifications.
Portion to cut in case of defect
L
11.0 +0
–1.0
Hold down tape width
W0
11.5 min.
Hold down tape position
W2
Coating extension on lead
W
∗
W
W1
L
F
W0 W2
H0
ød
øD0
R
H0
Lead Code
N2, N3, N4, N7
∗
e
D
O ∆h2
∆h1
T max.
Marked side
∆S
P
P0
W1
e
P0
P1
W0 W2
H0
ød
F
L
W
P1
øD0
R
P0
H
W1
W0
L
W2
ød
F
5
∆S
D
e
P1
W
30mm pitch / lead spacing 7.5mm taping
Vertical crimp type
(Lead Code: N7)
∆S
D
W2
W0
L
W1
L
P
øD0
R
P0
15mm pitch / lead spacing 7.5mm taping
Straight type
(Lead Code: P3)
P2
ød
F
øD0
R
P0
P1
W
ød
F
W0 W2
H0
P1
H0
W1
D
P
e
P2
15mm pitch / lead spacing 7.5mm taping
Vertical crimp type
(Lead Code: N3)
e
Deviation across tape, front
∆h1
Deviation across tape, rear
∆h2
1.5±1.5
Up to the end of crimp
1.0 max.
3.0 max.
Up to the end of crimp
2.0 max.
(in mm)
Continued on the following page.
23
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Packaging
Continued from the preceding page.
Packaging Styles
Bulk
Taping
Polyethylene Bag
Ammo Pack
5
Minimum Quantity (Order in Sets Only)
[Bulk] 1,000 pcs.
[Taping]
Lead Code
N2
N3, P3
(pcs.)
Type KY
Type KH
Type KX
DEJ Series
1,000
–
–
1,500
900
900
–
1,000
N7
–
400
–
–
N4, N5
–
–
500
–
Minimum Order Quantity
[Bulk] 3,000 pcs.
(pcs.)
[Taping]
Lead Code
Type KY
Type KH
Type KX
DEJ Series
N2
3,000
–
–
3,000
N3, P3
2,700
2,700
–
3,000
N7
–
2,000
–
–
N4, N5
–
2,000
–
–
“Minimum Quantity” means the numbers of units of each delivery or order.
The quantity should be an integral multiple of the “minimum quantity”.
(In case of bulk packaging, minimum quantities differ from packing quantities in a
bulk bag.)
24
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors !Caution
■ !Caution (Rating)
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p which contains DC bias within
the rated voltage range.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to
use a capacitor with a rated voltage range that includes
these irregular voltages.
Voltage
DC Voltage
DC+AC Voltage
AC Voltage
Pulse Voltage (1)
Pulse Voltage (2)
5
Positional
Measurement
V0-p
V0-p
Vp-p
Vp-p
Vp-p
2. Operating Temperature and Self-generated Heat
(Apply to B/E/F Char.)
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range. Be
sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a highfrequency current, pulse current or similar current, it may
have self-generated heat due to dielectric loss. Applied
voltage load should be such that self-generated heat is
within 20°C under the condition where the capacitor is
subjected to an atmosphere temperature of 25°C. When
measuring, use a thermocouple of small thermal
capacity-K of ø0.1mm under conditions where the
capacitor is not affected by radiant heat from other
components or wind from surroundings. Excessive heat
may lead to deterioration of the capacitor's characteristics
and reliability. (Never attempt to perform measurement
with the cooling fan running. Otherwise, accurate
measurement cannot be ensured.)
3. Test Condition for Withstanding Voltage
(1) Test Equipment
Test equipment for AC withstanding voltage should be
used with the performance of the wave similar to
50/60Hz sine wave.
If the distorted sine wave or overload exceeding the
specified voltage value is applied, a defect may be
caused.
Continued on the following page.
25
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors !Caution
Continued from the preceding page.
5
(2) Voltage Applied Method
When the withstanding voltage is applied, capacitor's
lead or terminal should be firmly connected to the output
of the withstanding voltage test equipment, and then the
voltage should be raised from near zero to the test
voltage.
If the test voltage without the raise from near zero voltage
would be applied directly to capacitor, test voltage should
be applied with the zero cross*. At the end of the test
time, the test voltage should be reduced to near zero,
and then capacitor's lead or terminal should be taken off
the output of the withstanding voltage test equipment.
If the test voltage without the raise from near zero voltage
would be applied directly to capacitor, the surge voltage
may arise, and therefore, a defect may be caused.
*ZERO CROSS is the point where voltage sine wave
passes 0V. See figure at right.
4. Fail-Safe
When capacitor is broken, failure may result in a short
circuit. Be sure to provide an appropriate fail-safe
function like a fuse on your product if failure could result
in an electric shock, fire or fuming.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
26
Voltage sine wave
0V
zero cross
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors !Caution
■ !Caution (Storage and Operating Condition)
Operating and Storage Environment
The insulating coating of capacitors does not form a
perfect seal; therefore, do not use or store
capacitors in a corrosive atmosphere, especially
where chloride gas, sulfide gas, acid, alkali, salt
or the like are present. And avoid exposure to
moisture. Before cleaning, bonding, or molding this
product, verify that these processes do not affect
product quality by testing the performance of a
cleaned, bonded or molded product in the intended
equipment. Store the capacitors where the
temperature and relative humidity do not exceed -10
to 40 degrees centigrade and 15 to 85%.
Use capacitors within 6 months after delivery.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
5
■ !Caution (Soldering and Mounting)
1. Vibration and Impact
Do not expose a capacitor or its leads to
excessive shock or vibration during use.
2. Soldering
When soldering this product to a PCB/PWB, do not
exceed the solder heat resistance specifications of
the capacitor. Subjecting this product to excessive
heating could melt the internal junction solder and
may result in thermal shocks that can crack the
ceramic element.
When soldering capacitor with a soldering iron, it
should be performed in the following conditions.
Temperature of iron-tip: 400 degrees C. max.
Soldering iron wattage: 50W max.
Soldering time: 3.5 sec. max.
3. Bonding, Resin Molding and Coating
Before bonding, molding or coating this product,
verify that these processes do not affect the
quality of capacitor by testing the performance of
the bonded, molded or coated product in the
intended equipment.
In case the amount of applications,
dryness/hardening conditions of adhesives and
molding resins containing organic solvents
(ethyl acetate, methyl ethyl ketone, toluene, etc.)
are unsuitable, the outer coating resin of a
capacitor is damaged by the organic solvents and
it may result, worst case, in a short circuit.
The variation in thickness of adhesive, molding
resin or coating may cause outer coating resin
cracking and/or ceramic element cracking of a
capacitor in a temperature cycling.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
■ !Caution (Handling)
Vibration and Impact
Do not expose a capacitor or its leads to excessive
shock or vibration during use.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
27
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Notice
■ Notice (Soldering and Mounting)
Cleaning (ultrasonic cleaning)
To perform ultrasonic cleaning, observe the following
conditions.
Rinse bath capacity: Output of 20 watts per liter or less.
Rinsing time: 5 min. maximum.
Do not vibrate the PCB/PWB directly.
Excessive ultrasonic cleaning may lead to fatigue
destruction of the lead wires.
■ Notice (Rating)
5
1. Capacitance Change of Capacitors
(1) In case of SL char.
Capacitance might change a little depending on a
surrounding temperature or an applied voltage.
Please contact us if you use for the strict
constant time circuit.
(2) In case of B/E/F char.
Capacitors have an aging characteristic, whereby
the capacitor continually decreases its
capacitance slightly if the capacitor is left on
for a long time. Moreover, capacitance might
change greatly depending on the surrounding
temperature or an applied voltage. So, it is not
likely to be suitable for use in a constant time
circuit.
Please contact us if you need detailed information.
28
2. Performance Check by Equipment
Before using a capacitor, check that there is no
problem in the equipment's performance and the
specifications.
Generally speaking, CLASS 2 (B/E/F char.) ceramic
capacitors have voltage dependence characteristics
and temperature dependence characteristics in
capacitance. So, the capacitance value may change
depending on the operating condition in the
equipment. Therefore, be sure to confirm the
apparatus performance of receiving influence in
the capacitance value change of a capacitor,
such as leakage current and noise suppression
characteristic.
Moreover, check the surge-proof ability of a
capacitor in the equipment, if needed, because the
surge voltage may exceed specific value by the
inductance of the circuit.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors
DES Series (125 deg. C Guaranteed/Low-dissipation Factor/DC500V-1kV)
D max.
1. Low dissipation factor series which can be used for
power supplies with an increased switching
frequency.
2. The allowable power in the 100 to 300kHz band is
improved to approximately one-and-a-half times
that of DEH series while remaining the same size.
3. Operating temperature range is guaranteed up to 125
degrees C.
4. Coated with flame-retardant epoxy resin
(equivalent to UL94V-0 standard).
5. Taping available for automatic insertion.
T max.
3.0 max.
■ Features
25.0 min.
e
F±1.0
ød
(in mm)
Lead Code
Coating Extension e
ød
A2, A3
Up to the end of crimp
0.6±0.05
D max.
■ Applications
Ideal for use on high frequency pulse circuits such as
snubber circuits for switching power supplies.
ød
1.0
3.5±0.5
e
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
6
T max.
3.0 max.
[Bulk]
Vertical Crimp Long (A2,A3)
F±0.8
(in mm)
[Bulk]
Vertical Crimp Short (J2,J3)
Lead Code
Coating Extension e
ød
J2, J3
Up to the end of crimp
0.6±0.05
■ Marking
Rated Voltage
DC500V
DC1kV
ø6mm
SD
101
66
SD
101
1KV 66
ø7-9mm
SD
102K
66
SD
471K
1KV 66
ø10-17mm
SD
222K
66
SD
152K
1KV
66
Nominal Body Diameter
Series Code
Temperature Characteristic
Nominal Capacitance
Capacitance Tolerance
Rated Voltage
Abbreviation (S)
Marked with code
Marked with 3 figures
Marked with code (omitted for nominal body diameter ø6mm)
Marked with code (omitted for DC500V)
Manufacturer's Identification
Marked with
Manufactured Date Code
Abbreviation
(omitted for nominal body diameter ø9mm and under)
29
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
D Characteristics
6
Part Number
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Lead
Body Thickness T
Package
(mm)
Long Bulk
Lead
Package
Short Bulk
Lead
Package
Taping
DESD32H101Kppp
500
100 ±10%
6
5.0
4.0
A2B
J2B
N2A
DESD32H151Kppp
500
150 ±10%
6
5.0
DESD32H221Kppp
500
220 ±10%
6
5.0
4.0
A2B
J2B
N2A
4.0
A2B
J2B
DESD32H331Kppp
500
330 ±10%
6
N2A
5.0
4.0
A2B
J2B
DESD32H471Kppp
500
470 ±10%
N2A
6
5.0
4.0
A2B
J2B
DESD32H681Kppp
500
N2A
680 ±10%
6
5.0
4.0
A2B
J2B
N2A
DESD32H102Kppp
DESD32H152Kppp
500
1000 ±10%
8
5.0
4.0
A2B
J2B
N2A
500
1500 ±10%
9
5.0
4.0
A2B
J2B
N2A
DESD32H222Kppp
500
2200 ±10%
10
5.0
4.0
A2B
J2B
N2A
DESD32H332Kppp
500
3300 ±10%
12
7.5
4.0
A3B
J3B
N3A
DESD32H472Kppp
500
4700 ±10%
14
7.5
4.0
A3B
J3B
N7A
DESD33A101Kppp
1000
100 ±10%
6
5.0
4.5
A2B
J2B
N2A
DESD33A151Kppp
1000
150 ±10%
6
5.0
4.5
A2B
J2B
N2A
DESD33A221Kppp
1000
220 ±10%
6
5.0
4.5
A2B
J2B
N2A
DESD33A331Kppp
1000
330 ±10%
6
5.0
4.5
A2B
J2B
N2A
DESD33A471Kppp
1000
470 ±10%
7
5.0
4.5
A2B
J2B
N2A
DESD33A681Kppp
1000
680 ±10%
8
5.0
4.5
A2B
J2B
N2A
DESD33A102Kppp
1000
1000 ±10%
9
5.0
4.5
A2B
J2B
N2A
DESD33A152Kppp
1000
1500 ±10%
10
5.0
4.5
A2B
J2B
N2A
DESD33A222Kppp
1000
2200 ±10%
12
7.5
4.5
A3B
J3B
N3A
DESD33A332Kppp
1000
3300 ±10%
14
7.5
4.5
A3B
J3B
N7A
DESD33A472Kppp
1000
4700 ±10%
17
7.5
4.5
A3B
J3B
N7A
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
30
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DES Series Specifications and Test Methods
No.
Item
Specifications
Test Method
1
Operating Temperature Range
-25 to +125°C
2
Appearance and Dimensions
No marked defect on appearance form
and dimensions are within specified
range.
3
Marking
To be easily legible
The capacitor should be visually inspected.
No failure
The capacitor should not be damaged when DC voltage of
200% of the rated voltage (DC1kV) or DC voltage of 250% of
the rated voltage (DC500V) is applied between the lead wires
for 1 to 5 sec.
(Charge/Discharge currentV50mA)
No failure
The capacitor is placed in the container with
metal balls of diameter 1mm so that each
lead wire, short circuited, is kept about 2mm
off the metal balls as shown in the figure at
right, and AC1250V(r.m.s.) is
applied for 1 to 5 sec. between capacitor
lead wires and metal balls.
(Charge/Discharge currentV50mA)
Between Lead
Wires
4
Dielectric
Strength
Body Insulation
The insulation resistance should be measured with
DC500±50V within 60±5 sec. of charging.
Capacitance
Within specified tolerance
The capacitance should be measured at 20°C with 1±0.2kHz
and AC5V(r.m.s.) max.
Dissipation Factor (D.F.)
0.3% max.
The dissipation factor should be measured at 20°C with
1±0.2kHz and AC5V(r.m.s.) max.
Within +20/-30%
(Temp. range: -25 to +125°C)
The capacitance measurement should be made at each step
specified in Table.
Insulation
Resistance (I.R.)
6
7
Between Lead
Wires
Temperature Characteristics
Lead wire should not be cut off.
Capacitor should not be broken.
Strength of Lead
11
12
Vibration
Resistance
Appearance
No marked defect
Capacitance
Within specified tolerance
D.F.
0.3% max.
Solderability of Leads
Soldering Effect
(Non-Preheat)
As shown in the figure at right, fix the body of
the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N and keep
it for 10±1 sec.
W
Each lead wire should be subjected to 5N of weight and bent
90° at the point of egress, in one direction, then returned to its
original position and bent 90° in the opposite direction at the
rate of one bend in 2 to 3 sec.
Bending
10
6
Pre-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at
room condition* for 24±2 hrs. before measurements.
2
3
4
5
1
Step
20±2
-25±3
20±2
125±2
20±2
Temp. (°C)
Pull
9
About 2mm
Metal balls
10000MΩ min.
5
8
The capacitor should be visually inspected for evidence of
defect.
Dimensions should be measured with slide calipers.
Lead wire should be soldered with
uniform coating on the axial direction
over 3/4 of the circumferential direction.
Appearance
No marked defect
Capacitance
Change
Within ±10%
Dielectric Strength
(Between Lead
Wires)
Per item 4.
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1 minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,
2 hrs. each in 3 mutually perpendicular directions.
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
sec. In both cases the depth of dipping is up to about 1.5 to
2mm from the root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
The lead wire should be immersed into the melted solder of
350±10°C up to about 1.5 to 2mm from the main body for
3.5±0.5 sec.
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition* for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 24±2 hrs. at room condition*.
* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
31
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DES Series Specifications and Test Methods
Continued from the preceding page.
No.
13
14
6
15
16
17
Item
Soldering Effect
(On-Preheat)
Temperature
Cycle
Humidity (Under
Steady State)
Humidity
Loading
Life
Specifications
Appearance
No marked defect
Capacitance
Change
Within ±10%
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Appearance
No marked defect
Capacitance
Change
Within ±10%
D.F.
0.4% max.
I.R.
1000MΩ min.
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Appearance
No marked defect
Capacitance
Change
Within ±10%
D.F.
0.4% max.
I.R.
1000MΩ min.
Appearance
No marked defect
Capacitance
Change
Within ±10%
D.F.
0.6% max.
I.R.
1000MΩ min.
Appearance
No marked defect
Capacitance
Change
Within ±10%
D.F.
0.4% max.
I.R.
2000MΩ min.
Test Method
First the capacitor should be
, Capacitor
Thermal
stored at 120+0/-5°C for
Screen,
,
60+0/-5 sec.
,
,
,,,,,,,,,,
,,,,,,
, 1.5
Then, as in figure, the lead wires
,,,,,,,,,,
,,,,
,
, to 2.0mm
,
should be immersed in solder of
,,,Molten
260+0/-5°C up to 1.5 to 2.0mm
Solder
from the root of terminal for
7.5+0/-1 sec.
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition* for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 24±2 hrs. at room condition*.
The capacitor should be subjected to 5 temperature cycles.
Step
1
2
3
4
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition* for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 24±2 hrs. at room condition*.
Set the capacitor for 500+24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition* for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*.
Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in 90 to
95% relative humidity. (Charge/Discharge currentV50mA)
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition* for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*.
Apply a DC voltage of 200% of the rated voltage (DC500V) or
DC voltage of 150% of the rated voltage (DC1kV) for 1000
+48/-0 hrs. at 125±2°C with a relative humidity of 50% max.
(Charge/Discharge currentV50mA)
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition* for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition* for 24±2 hrs.
* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
32
Temperature (°C) Time (min)
-25±3
30
Room Temp.
3
125±3
30
Room Temp.
3
Cycle time: 5 cycle
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors
DEH Series (125 deg. C Guaranteed/Low-dissipation Factor/DC250V-3.15kV)
■ Features
1. Reduced heat dissipation permitted due to small
dielectric loss of the ceramic material.
2. Operating temperature range is guaranteed up to 125
degrees C.
3. Coated with flame-retardant epoxy resin
(equivalent to UL94V-0 standard).
4. Taping available for automatic insertion.
T max.
T max.
3.0 max.
D max.
25.0 min.
25.0 min.
e
F±1.0
ød
(in mm)
Fig. 1
0.6±0.05
Fig. 2
3.0 max.
C3
Ideal for use on high frequency pulse circuits such as
a horizontal resonance circuit for CTV and snubber
circuits for switching power supplies.
D max.
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
Style
A2, A3, A4 Up to the end of crimp 0.6±0.05
T max.
T max.
ød
5.0±1.0
e
7
5.0±1.0
■ Applications
ød
3.0 max.
[Bulk]
Vertical Crimp Long (Fig. 1)
Straight Long (Fig. 2)
Lead Code Coating Extension e
F±0.8
(in mm)
Lead Code Coating Extension e
[Bulk]
Vertical Crimp Short (Fig. 1)
Straight Short (Fig. 2)
ød
Style
B2, B3, B4 Up to the end of crimp 0.6±0.05
Fig. 1
0.6±0.05
Fig. 2
D3
3.0 max.
■ Marking
DC250V
DC500V
DC1-3.15kV
R
C
R
ø6mm
HR
102
66
HR
471
66
ø7-9mm
HR R
332K
250V
66
HR C
152K
66
HR R
102K
1KV 66
ø10-21mm
HR R
103K
250V
66
HR C
472K
66
HR R
272K
3KV
66
Rated Voltage
Nominal
Body Diameter
Temp. Char.
High Temperature Guaranteed Code
Temperature Characteristics
Nominal Capacitance
Capacitance Tolerance
DC250V
Rated Voltage
HR
Marked with code (omitted for nominal body diameter ø6mm)
Marked with 3 figures
Marked with code (omitted for nominal body diameter ø6mm)
Marked with code
(Marked with horizontal line over nominal capacitance for nominal body diameter ø6mm)
DC500V
Omitted
DC1-3.15kV
Marked with code (In case of DC3.15kV, marked with 3KV)
Manufacturer's Identification
Marked with
Manufactured Date Code
Abbreviation
(omitted for nominal body diameter ø9mm and under)
33
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DC250V, R Characteristics
Part Number
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Lead
Body Thickness T
Package
(mm)
Long Bulk
Lead
Package
Short Bulk
Lead
Package
Taping
DEHR32E221Kppp
250
220 ±10%
6
5.0
4.0
A2B
B2B
N2A
DEHR32E331Kppp
250
330 ±10%
6
5.0
DEHR32E471Kppp
250
470 ±10%
6
5.0
4.0
A2B
B2B
N2A
4.0
A2B
B2B
DEHR32E681Kppp
250
680 ±10%
6
N2A
5.0
4.0
A2B
B2B
DEHR32E102Kppp
250
1000 ±10%
N2A
6
5.0
4.0
A2B
B2B
DEHR32E152Kppp
250
N2A
1500 ±10%
7
5.0
4.0
A2B
B2B
N2A
DEHR32E222Kppp
DEHR32E332Kppp
250
2200 ±10%
8
5.0
4.0
A2B
B2B
N2A
250
3300 ±10%
9
5.0
4.0
A2B
B2B
N2A
DEHR32E472Kppp
250
4700 ±10%
10
5.0
4.0
A2B
B2B
N2A
DEHR32E682Kppp
250
6800 ±10%
12
5.0
4.0
A2B
B2B
N2A
DEHR32E103Kppp
250
10000 ±10%
12
5.0
4.0
A2B
B2B
N2A
Lead
Package
Short Bulk
Lead
Package
Taping
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
DC500V, C Characteristics
7
Part Number
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Lead
Body Thickness T
Package
(mm)
Long Bulk
DEHC32H331Kppp
500
330 ±10%
6
5.0
4.0
A2B
B2B
N2A
DEHC32H471Kppp
500
470 ±10%
6
5.0
4.0
A2B
B2B
N2A
DEHC32H681Kppp
500
680 ±10%
7
5.0
4.0
A2B
B2B
N2A
DEHC32H102Kppp
500
1000 ±10%
8
5.0
4.0
A2B
B2B
N2A
DEHC32H152Kppp
500
1500 ±10%
9
5.0
4.0
A2B
B2B
N2A
DEHC32H222Kppp
500
2200 ±10%
10
5.0
4.0
A2B
B2B
N2A
DEHC32H332Kppp
500
3300 ±10%
12
5.0
4.0
A2B
B2B
N2A
DEHC32H472Kppp
500
4700 ±10%
14
10.0
4.0
A4B
B4B
-
Lead
Package
Short Bulk
Lead
Package
Taping
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
DC1-3.15kV, R Characteristics
Part Number
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Lead
Body Thickness T
Package
(mm)
Long Bulk
DEHR33A221Kppp
1000
220 ±10%
7
5.0
4.5
A2B
B2B
N2A
DEHR33A331Kppp
1000
330 ±10%
7
5.0
4.5
A2B
B2B
N2A
DEHR33A471Kppp
1000
470 ±10%
7
5.0
4.5
A2B
B2B
N2A
DEHR33A681Kppp
1000
680 ±10%
8
5.0
4.5
A2B
B2B
N2A
DEHR33A102Kppp
1000
1000 ±10%
9
5.0
4.5
A2B
B2B
N2A
DEHR33A152Kppp
1000
1500 ±10%
11
5.0
4.5
A2B
B2B
N2A
DEHR33A222Kppp
1000
2200 ±10%
13
7.5
4.5
A3B
B3B
N3A
DEHR33A332Kppp
1000
3300 ±10%
15
7.5
4.5
A3B
B3B
N7A
DEHR33A472Kppp
1000
4700 ±10%
17
7.5
4.5
A3B
B3B
N7A
DEHR33D221Kppp
2000
220 ±10%
7
7.5
5.0
C3B
D3B
P3A
DEHR33D271Kppp
2000
270 ±10%
7
7.5
5.0
C3B
D3B
P3A
DEHR33D331Kppp
2000
330 ±10%
8
7.5
5.0
A3B
B3B
N3A
DEHR33D391Kppp
2000
390 ±10%
8
7.5
5.0
A3B
B3B
N3A
DEHR33D471Kppp
2000
470 ±10%
9
7.5
5.0
A3B
B3B
N3A
DEHR33D561Kppp
2000
560 ±10%
9
7.5
5.0
A3B
B3B
N3A
DEHR33D681Kppp
2000
680 ±10%
10
7.5
5.0
A3B
B3B
N3A
DEHR33D821Kppp
2000
820 ±10%
11
7.5
5.0
A3B
B3B
N3A
DEHR33D102Kppp
2000
1000 ±10%
12
7.5
5.0
A3B
B3B
N3A
DEHR33D122Kppp
2000
1200 ±10%
12
7.5
5.0
A3B
B3B
N3A
DEHR33D152Kppp
2000
1500 ±10%
12
7.5
5.0
A3B
B3B
N3A
DEHR33D182Kppp
2000
1800 ±10%
14
7.5
5.0
A3B
B3B
N7A
Continued on the following page.
34
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Part Number
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Lead
Body Thickness T
Package
(mm)
Long Bulk
Lead
Package
Short Bulk
Lead
Package
Taping
DEHR33D222Kppp
2000
2200 ±10%
15
7.5
5.0
DEHR33D272Kppp
2000
2700 ±10%
17
7.5
5.0
A3B
B3B
N7A
A3B
B3B
DEHR33D332Kppp
2000
3300 ±10%
19
10.0
N7A
5.0
A4B
B4B
DEHR33D392Kppp
2000
3900 ±10%
20
-
10.0
5.0
A4B
B4B
-
DEHR33D472Kppp
2000
4700 ±10%
DEHR33F151Kppp
3150
150 ±10%
21
10.0
5.0
A4B
B4B
-
7
7.5
6.0
C3B
D3B
P3A
DEHR33F181Kppp
3150
DEHR33F221Kppp
3150
180 ±10%
7
7.5
6.0
C3B
D3B
P3A
220 ±10%
7
7.5
6.0
C3B
D3B
DEHR33F271Kppp
P3A
3150
270 ±10%
7
7.5
6.0
C3B
D3B
P3A
DEHR33F331Kppp
3150
330 ±10%
8
7.5
6.0
A3B
B3B
N3A
DEHR33F391Kppp
3150
390 ±10%
9
7.5
6.0
A3B
B3B
N3A
DEHR33F471Kppp
3150
470 ±10%
10
7.5
6.0
A3B
B3B
N3A
DEHR33F561Kppp
3150
560 ±10%
10
7.5
6.0
A3B
B3B
N3A
DEHR33F681Kppp
3150
680 ±10%
11
7.5
6.0
A3B
B3B
N3A
DEHR33F821Kppp
3150
820 ±10%
12
7.5
6.0
A3B
B3B
N3A
DEHR33F102Kppp
3150
1000 ±10%
13
7.5
6.0
A3B
B3B
N3A
DEHR33F122Kppp
3150
1200 ±10%
14
7.5
6.0
A3B
B3B
N7A
DEHR33F152Kppp
3150
1500 ±10%
15
7.5
6.0
A3B
B3B
N7A
DEHR33F182Kppp
3150
1800 ±10%
16
7.5
6.0
A3B
B3B
N7A
DEHR33F222Kppp
3150
2200 ±10%
17
7.5
6.0
A3B
B3B
N7A
DEHR33F272Kppp
3150
2700 ±10%
19
10.0
6.0
A4B
B4B
-
7
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
35
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEH Series Specifications and Test Methods
No.
Item
Test Method
1
Operating Temperature Range
2
Appearance and Dimensions
No marked defect on appearance form
and dimensions are within specified
range.
The capacitor should be visually inspected for evidence of
defect. Dimensions should be measured with slide calipers.
3
Marking
To be easily legible
The capacitor should be visually inspected.
No failure
The capacitor should not be damaged when DC voltage of
200% of the rated voltage (DC1 to 3.15kV) or DC voltage of
250% of the rated voltage (DC250V, DC500V) is applied
between the lead wires for 1 to 5 sec.
(Charge/Discharge currentV50mA)
No failure
The capacitor is placed in the container with
metal balls of diameter 1mm so that each
lead wire, short circuited, is kept about 2mm
off the metal balls as shown in the figure at
right, and AC1250V(r.m.s.) is
applied for 1 to 5 sec. between capacitor
lead wires and metal balls.
(Charge/Discharge currentV50mA)
Between Lead
Wires
4
Dielectric
Strength
Body Insulation
7
Specifications
-25 to +125°C
Char. R [DC1 to 3.15kV], Char. C
: 10000MΩ min.
Char. R [DC250V]: 1000MΩ min.
The insulation resistance should be measured with
DC500±50V (Char. R [DC 250V]: DC100±15V) within
60±5 sec. of charging.
Capacitance
Within specified tolerance
The capacitance should be measured at 20°C with 1±0.2kHz
and AC5V(r.m.s.) max.
Dissipation Factor (D.F.)
Char. R [DC250V]: 0.4% max.
Char. R [DC1 to 3.15kV]: 0.2% max.
Char. C: 0.3% max.
The dissipation factor should be measured at 20°C with
1±0.2kHz and AC5V(r.m.s.) max.
5
Insulation
Resistance (I.R.)
6
7
Between Lead
Wires
T. C.
R
C
8
About 2mm
Metal balls
Temp. Char.
-25 to +85°C +85 to +125°C
Within ±15%
Within +15/-30%
Within ±20%
The capacitance measurement should be made at each step
specified in Table.
Temperature Characteristics
Pre-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at
room condition*1 for 24±2 hrs. before measurements.
2
3
4
5
1
Step
20±2
-25±3
20±2
125±2
20±2
Temp. (°C)
Pull
9
Lead wire should not be cut off.
Capacitor should not be broken.
Strength of Lead
11
Vibration
Resistance
Appearance
No marked defect
Capacitance
Within specified tolerance
D.F.
Char. R [DC250V]: 0.4% max.
Char. R [DC1 to 3.15kV]: 0.2% max.
Char. C: 0.3% max.
Solderability of Leads
W
Each lead wire should be subjected to 5N (2.5N for lead
diameter 0.5mm) of weight and bent 90° at the point of egress,
in one direction, then returned to its original position and bent
90° in the opposite direction at the rate of one bend in 2 to 3
sec.
Bending
10
As shown in the figure at right, fix the body of
the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N (5N for
lead diameter 0.5mm), and keep it for 10±1
sec.
Lead wire should be soldered with
uniform coating on the axial direction
over 3/4 of the circumferential direction.
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1 minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,
2 hrs. each in 3 mutually perpendicular directions.
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
sec. In both cases the depth of dipping is up to about 1.5 to
2mm from the root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
36
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEH Series Specifications and Test Methods
Continued from the preceding page.
No.
12
13
14
15
Item
Soldering Effect
(Non-Preheat)
Soldering Effect
(On-Preheat)
Specifications
Appearance
No marked defect
Capacitance
Change
Within ±10%
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Appearance
No marked defect
Capacitance
Change
Within ±10%
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Appearance
No marked defect
Capacitance
Change
Within ±10%
D.F.
0.4% max.
I.R.
1000MΩ min.
Temperature
Cycle
Humidity (Under
Steady State)
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Appearance
No marked defect
Capacitance
Change
Within ±10%
D.F.
0.4% max.
I.R.
1000MΩ min.
Test Method
The lead wire should be immersed into the melted solder of
350±10°C up to about 1.5 to 2mm from the main body for
3.5±0.5 sec.
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 24±2 hrs. at room condition*1.
Measurement order:
Dielectric strength -> Pre-treatment -> Capacitance ->
Soldering effect test -> Post-treatment ->
Capacitance • Dielectric strength (Char. R [DC250V])
First the capacitor should be
, Capacitor
Thermal
stored at 120+0/-5°C for
Screen,
,
60+0/-5 sec.
,
,
,,,,,,,,,,
, 1.5
,,,,,,
Then, as in figure, the lead wires
,,,,,,,,,,
,,,,
,
, to 2.0mm
,
should be immersed in solder of
,,,Molten
260+0/-5°C up to 1.5 to 2.0mm
Solder
from the root of terminal for
7.5+0/-1 sec.
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 24±2 hrs. at room condition*1.
Measurement order:
Dielectric strength -> Pre-treatment -> Capacitance ->
Soldering effect test -> Post-treatment ->
Capacitance • Dielectric strength (Char. R [DC250V])
The capacitor should be subjected to 5 temperature cycles.
Step
1
2
3
4
Temperature (°C) Time (min)
-25±3
30
Room Temp.
3
125±3
30
Room Temp.
3
Cycle time: 5 cycle
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 24±2 hrs. at room condition*1.
Measurement order:
I.R. • Dielectric strength -> Pre-treatment -> Capacitance •
D.F. -> Temperature cycle test -> Post-treatment ->
Capacitance • D.F. • I.R. • Dielectric strength
(Char. R [DC250V])
Set the capacitor for 500 +24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
Measurement order:
I.R. -> Pre-treatment -> Capacitance • D.F. -> Humidity test ->
Post-treatment -> Capacitance • D.F. • I.R.
(Char. R [DC250V])
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
37
7
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEH Series Specifications and Test Methods
Continued from the preceding page.
No.
16
17
7
Item
Specifications
Appearance
No marked defect
Capacitance
Change
Within ±10%
D.F.
0.6% max.
I.R.
1000MΩ min.
Appearance
No marked defect
Capacitance
Change
Within ±10%
D.F.
0.4% max.
I.R.
Char. R [DC1 to 3.15kV], Char. C
: 2000MΩ min.
Char. R [DC250V]: 1000MΩ min.
Humidity
Loading
Life
Test Method
Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in 90 to
95% relative humidity. (Charge/Discharge currentV50mA)
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed at
room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
(Char. R [DC1 to 3.15kV], Char. C)
Post-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition*1 for 24±2 hrs. (Char. R [DC250V])
Measurement order:
I.R. -> Pre-treatment -> Capacitance • D.F. ->
Humidity loading test -> I.R.*2 -> Post-treatment ->
Capacitance • D.F. (Char. R [DC250V])
Apply a DC voltage of 200% of the rated voltage (DC250V,
DC500V) or DC voltage of 150% of the rated voltage (DC1 to
3.15kV) for 1000 +48/-0 hrs. at 125±2°C with a relative
humidity of 50% max.
(Charge/Discharge currentV50mA)
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition*1 for 24±2 hrs.
Measurement order:
I.R. -> Pre-treatment -> Capacitance • D.F. -> Life test ->
I.R.*3 -> Post-treatment -> Capacitance • D.F.
(Char. R [DC250V])
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 The measurement of I.R. will be held in 1 to 2 hrs. after Humidity loading test.
*3 The measurement of I.R. will be held in 12 to 24 hrs. after Life test.
38
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors
DEA Series (125 deg. C Guaranteed/Class 1/DC1k-3.15kV)
D max.
1. Temperature compensating type ceramics realize low
heat dissipation than DEH/DES series.
2. Operating temperature range is guaranteed up to 125
degrees C.
3. Coated with flame-retardant epoxy resin
(equivalent to UL94V-0 standard).
4. Taping available for automatic insertion.
25.0 min.
25.0 min.
F±1.0
ød
(in mm)
Lead Code Coating Extension e
A2, A3
ød
Style
Up to the end of crimp 0.6±0.05
Fig. 1
C1, CD
3.0 max.
0.5±0.05
Fig. 2
C3
3.0 max.
0.6±0.05
Fig. 2
T max.
T max.
ød
5.0±1.0
e
5.0±1.0
D max.
3.0 max.
1. Ideal for use as the ballast in back lighting
inverters for liquid crystal display.
2. Ideal for use on high frequency pulse circuits such
as a horizontal resonance circuit for CTV and snubber
circuits for switching power supplies.
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
T max.
e
[Bulk]
Vertical Crimp Long (Fig. 1)
Straight Long (Fig. 2)
■ Applications
T max.
3.0 max.
■ Features
F±0.8
(in mm)
Lead Code Coating Extension e
B2, B3
[Bulk]
Vertical Crimp Short (Fig. 1)
Straight Short (Fig. 2)
ød
8
Style
Up to the end of crimp 0.6±0.05
Fig. 1
D1, DD
3.0 max.
0.5±0.05
Fig. 2
D3
3.0 max.
0.6±0.05
Fig. 2
■ Marking
Temp. Char.
SL
Nominal Body Diameter
ø4.5-5mm
68
1KV
ø6mm
39
3KV
66
ø7-9mm
181J
2KV
66
ø10-16mm
391J
3KV
66
Nominal Capacitance
Capacitance Tolerance
Rated Voltage
Manufacturer's Identification
Manufactured Date Code
Under 100pF: Actual value, 100pF and over: Marked with 3 figures
Marked with code (omitted for nominal body diameter ø6mm and under)
Marked with code (In case of DC3.15kV, marked with 3KV)
Marked with
(omitted for nominal body diameter ø9mm and under)
Abbreviation (omitted for nominal body diameter ø5mm and under)
39
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
SL Characteristics
8
Part Number
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Lead
Body Thickness T
Package
(mm)
Long Bulk
Lead
Package
Short Bulk
Lead
Package
Taping
DEA1X3A100Jppp
1000
10 ±5%
4.5
5.0
4.0
C1B
D1B
P2A
DEA1X3A120Jppp
1000
12 ±5%
4.5
5.0
DEA1X3A150Jppp
1000
15 ±5%
4.5
5.0
4.0
C1B
D1B
P2A
4.0
C1B
D1B
DEA1X3A180Jppp
1000
18 ±5%
4.5
P2A
5.0
4.0
C1B
D1B
DEA1X3A220Jppp
1000
22 ±5%
P2A
4.5
5.0
4.0
C1B
D1B
DEA1X3A270Jppp
1000
P2A
27 ±5%
4.5
5.0
4.0
C1B
D1B
P2A
DEA1X3A330Jppp
DEA1X3A390Jppp
1000
33 ±5%
4.5
5.0
4.0
C1B
D1B
P2A
1000
39 ±5%
4.5
5.0
4.0
C1B
D1B
P2A
DEA1X3A470Jppp
1000
47 ±5%
4.5
5.0
4.0
C1B
D1B
P2A
DEA1X3A560Jppp
1000
56 ±5%
5
5.0
4.0
C1B
D1B
P2A
DEA1X3A680Jppp
1000
68 ±5%
5
5.0
4.0
C1B
D1B
P2A
DEA1X3A820Jppp
1000
82 ±5%
6
5.0
4.0
A2B
B2B
N2A
DEA1X3A101Jppp
1000
100 ±5%
6
5.0
4.0
A2B
B2B
N2A
DEA1X3A121Jppp
1000
120 ±5%
6
5.0
4.0
A2B
B2B
N2A
DEA1X3A151Jppp
1000
150 ±5%
7
5.0
4.0
A2B
B2B
N2A
DEA1X3A181Jppp
1000
180 ±5%
7
5.0
4.0
A2B
B2B
N2A
DEA1X3A221Jppp
1000
220 ±5%
8
5.0
4.0
A2B
B2B
N2A
DEA1X3A271Jppp
1000
270 ±5%
9
5.0
4.0
A2B
B2B
N2A
DEA1X3A331Jppp
1000
330 ±5%
10
5.0
4.0
A2B
B2B
N2A
DEA1X3A391Jppp
1000
390 ±5%
10
5.0
4.0
A2B
B2B
N2A
DEA1X3A471Jppp
1000
470 ±5%
11
5.0
4.0
A2B
B2B
N2A
DEA1X3A561Jppp
1000
560 ±5%
12
7.5
4.0
A3B
B3B
N3A
DEA1X3D100Jppp
2000
10 ±5%
4.5
5.0
5.0
C1B
D1B
P2A
DEA1X3D120Jppp
2000
12 ±5%
4.5
5.0
5.0
C1B
D1B
P2A
DEA1X3D150Jppp
2000
15 ±5%
4.5
5.0
5.0
C1B
D1B
P2A
DEA1X3D180Jppp
2000
18 ±5%
4.5
5.0
5.0
C1B
D1B
P2A
DEA1X3D220Jppp
2000
22 ±5%
4.5
5.0
5.0
C1B
D1B
P2A
DEA1X3D270Jppp
2000
27 ±5%
4.5
5.0
5.0
C1B
D1B
P2A
DEA1X3D330Jppp
2000
33 ±5%
4.5
5.0
5.0
C1B
D1B
P2A
DEA1X3D390Jppp
2000
39 ±5%
5
5.0
5.0
C1B
D1B
P2A
DEA1X3D470Jppp
2000
47 ±5%
6
5.0
5.0
A2B
B2B
N2A
DEA1X3D560Jppp
2000
56 ±5%
6
5.0
5.0
A2B
B2B
N2A
DEA1X3D680Jppp
2000
68 ±5%
6
5.0
5.0
A2B
B2B
N2A
DEA1X3D820Jppp
2000
82 ±5%
7
5.0
5.0
A2B
B2B
N2A
DEA1X3D101Jppp
2000
100 ±5%
7
5.0
5.0
A2B
B2B
N2A
DEA1X3D121Jppp
2000
120 ±5%
8
5.0
5.0
A2B
B2B
N2A
DEA1X3D151Jppp
2000
150 ±5%
8
5.0
5.0
A2B
B2B
N2A
DEA1X3D181Jppp
2000
180 ±5%
9
5.0
5.0
A2B
B2B
N2A
DEA1X3D221Jppp
2000
220 ±5%
10
5.0
5.0
A2B
B2B
N2A
DEA1X3D271Jppp
2000
270 ±5%
11
5.0
5.0
A2B
B2B
N2A
DEA1X3D331Jppp
2000
330 ±5%
12
7.5
5.0
A3B
B3B
N3A
DEA1X3D391Jppp
2000
390 ±5%
13
7.5
5.0
A3B
B3B
N3A
DEA1X3D471Jppp
2000
470 ±5%
14
7.5
5.0
A3B
B3B
N7A
DEA1X3D561Jppp
2000
560 ±5%
15
7.5
5.0
A3B
B3B
N7A
DEA1X3F100Jppp
3150
10 ±5%
5
7.5
6.0
CDB
DDB
P3A
DEA1X3F120Jppp
3150
12 ±5%
5
7.5
6.0
CDB
DDB
P3A
DEA1X3F150Jppp
3150
15 ±5%
5
7.5
6.0
CDB
DDB
P3A
DEA1X3F180Jppp
3150
18 ±5%
5
7.5
6.0
CDB
DDB
P3A
DEA1X3F220Jppp
3150
22 ±5%
5
7.5
6.0
CDB
DDB
P3A
DEA1X3F270Jppp
3150
27 ±5%
6
7.5
6.0
C3B
D3B
P3A
DEA1X3F330Jppp
3150
33 ±5%
6
7.5
6.0
C3B
D3B
P3A
DEA1X3F390Jppp
3150
39 ±5%
6
7.5
6.0
C3B
D3B
P3A
DEA1X3F470Jppp
3150
47 ±5%
7
7.5
6.0
C3B
D3B
P3A
DEA1X3F560Jppp
3150
56 ±5%
7
7.5
6.0
C3B
D3B
P3A
Continued on the following page.
40
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Part Number
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Lead
Body Thickness T
Package
(mm)
Long Bulk
Lead
Package
Short Bulk
Lead
Package
Taping
DEA1X3F680Jppp
3150
68 ±5%
8
7.5
6.0
DEA1X3F820Jppp
3150
82 ±5%
8
7.5
6.0
A3B
B3B
N3A
A3B
B3B
DEA1X3F101Jppp
3150
100 ±5%
9
7.5
N3A
6.0
A3B
B3B
DEA1X3F121Jppp
3150
120 ±5%
10
N3A
7.5
6.0
A3B
B3B
N3A
DEA1X3F151Jppp
3150
150 ±5%
DEA1X3F181Jppp
3150
180 ±5%
11
7.5
6.0
A3B
B3B
N3A
11
7.5
6.0
A3B
B3B
DEA1X3F221Jppp
3150
N3A
220 ±5%
12
7.5
6.0
A3B
B3B
DEA1X3F271Jppp
N3A
3150
270 ±5%
14
7.5
6.0
A3B
B3B
N7A
DEA1X3F331Jppp
3150
330 ±5%
15
7.5
6.0
A3B
B3B
N7A
DEA1X3F391Jppp
3150
390 ±5%
16
7.5
6.0
A3B
B3B
N7A
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
8
41
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEA Series Specifications and Test Methods
No.
Item
Specifications
Test Method
1
Operating Temperature Range
-25 to +125°C
2
Appearance and Dimensions
No marked defect on appearance form
and dimensions are within specified
range.
The capacitor should be visually inspected for evidence of
defect. Dimensions should be measured with slide calipers.
3
Marking
To be easily legible
The capacitor should be visually inspected.
No failure
The capacitor should not be damaged when DC voltage of
200% of the rated voltage is applied between the lead wires for
1 to 5 sec. (Charge/Discharge currentV50mA)
No failure
The capacitor is placed in the container with
metal balls of diameter 1mm so that each
lead wire, short circuited, is kept about 2mm
off the metal balls as shown in the figure at
right, and AC1250V(r.m.s.) is
applied for 1 to 5 sec. between capacitor
lead wires and metal balls.
(Charge/Discharge currentV50mA)
Between Lead
Wires
4
Dielectric
Strength
Body Insulation
10000MΩ min.
The insulation resistance should be measured with
DC500±50V within 60±5 sec. of charging.
Capacitance
Within specified tolerance
The capacitance should be measured at 20°C with 1±0.2MHz
and AC5V(r.m.s.) max.
Q
400+20C*2min. (30pF under)
1000 min. (30pF min.)
The Q should be measured at 20°C with 1±0.2MHz and
AC5V(r.m.s.) max.
+350 to -1000ppm/°C
(Temp. range: +20 to +85°C)
The capacitance measurement should be made at each step
specified in Table.
5
Insulation
Resistance (I.R.)
6
7
8
Between Lead
Wires
Temperature Characteristics
Step
Temp. (°C)
1
20±2
8
Pull
9
Lead wire should not be cut off.
Capacitor should not be broken.
Strength of Lead
11
12
Vibration
Resistance
Appearance
No marked defect
Capacitance
Within specified tolerance
Q
400+20C*2min. (30pF under)
1000 min. (30pF min.)
Solderability of Leads
Soldering Effect
(Non-Preheat)
2
-25±3
3
20±2
4
85±2
5
20±2
As shown in the figure at right, fix the body of
the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N (5N for
lead diameter 0.5mm), and keep it for 10±1
sec.
W
Each lead wire should be subjected to 5N (2.5N for lead
diameter 0.5mm) of weight and bent 90° at the point of egress,
in one direction, then returned to its original position and bent
90° in the opposite direction at the rate of one bend in 2 to 3
sec.
Bending
10
About 2mm
Metal balls
Lead wire should be soldered with
uniform coating on the axial direction
over 3/4 of the circumferential direction.
Appearance
No marked defect
Capacitance
Change
Within ±2.5%
Dielectric Strength
(Between Lead
Wires)
Per item 4.
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1 minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,
2 hrs. each in 3 mutually perpendicular directions.
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
sec. In both cases the depth of dipping is up to about 1.5 to
2mm from the root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
The lead wire should be immersed into the melted solder of
350±10°C (Body of ø5mm and under: 270±5°C) up to about 1.5
to 2mm from the main body for 3.5±0.5 sec.
(Body of ø5mm and under: 5±0.5 sec.)
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
42
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEA Series Specifications and Test Methods
Continued from the preceding page.
No.
13
14
15
16
17
Item
Soldering Effect
(On-Preheat)
Temperature
Cycle
Humidity (Under
Steady State)
Humidity
Loading
Specifications
Test Method
First the capacitor should be
, Capacitor
Thermal
stored at 120+0/-5°C for
Screen,
,
60+0/-5 sec.
,
,
,,,,,,,,,,
, 1.5
,,,,,,
Then, as in figure, the lead wires
,,,,,,,,,,
,,,,
,
, to 2.0mm
should be immersed in solder of
,
,,,Molten
260+0/-5°C up to 1.5 to 2.0mm
Solder
from the root of terminal for
7.5+0/-1 sec.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
Appearance
No marked defect
Capacitance
Change
Within ±2.5%
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Appearance
No marked defect
Capacitance
Change
Within ±5%
Q
275+5/2C*2min. (30pF under)
350 min. (30pF min.)
I.R.
1000MΩ min.
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Appearance
No marked defect
Capacitance
Change
Within ±5%
Set the capacitor for 500+24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
Q
275+5/2C*2min. (30pF under)
350 min. (30pF min.)
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
I.R.
1000MΩ min.
Appearance
No marked defect
Capacitance
Change
Within ±5%
Q
275+5/2C*2min. (30pF under)
350 min. (30pF min.)
I.R.
1000MΩ min.
Appearance
No marked defect
Capacitance
Change
Within ±3%
Q
275+5/2C*2min. (30pF under)
350 min. (30pF min.)
I.R.
2000MΩ min.
Life
The capacitor should be subjected to 5 temperature cycles.
Step
1
2
3
4
Temperature (°C) Time (min)
-25±3
30
Room Temp.
3
125±3
30
Room Temp.
3
Cycle time: 5 cycle
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in 90 to
95% relative humidity.
(Charge/Discharge currentV50mA)
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
Apply a DC voltage of 150% of the rated voltage for
1000+48/-0 hrs. at 125±2°C with a relative humidity of 50%
max. (Charge/Discharge currentV50mA)
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
1
43
8
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors
DEB Series (Class 2/DC1k-3.15kV)
D max.
1. Small size and high capacitance
2. Coated with flame-retardant epoxy resin
(equivalent to UL94V-0 standard).
3. Taping available for automatic insertion.
T max.
T max.
3.0 max.
■ Features
25.0 min.
25.0 min.
e
F±1.0
ød
■ Applications
(in mm)
Lead Code Coating Extension e
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
A2, A3
ød
Style
Up to the end of crimp 0.6±0.05
Fig. 1
C1, CD
3.0 max.
0.5±0.05
Fig. 2
C3
3.0 max.
0.6±0.05
Fig. 2
D max.
T max.
T max.
3.0 max.
[Bulk]
Vertical Crimp Long (Fig. 1)
Straight Long (Fig. 2)
ød
5.0±1.0
e
5.0±1.0
Ideal for use on decoupling circuits for power supplies.
F±0.8
(in mm)
Lead Code Coating Extension e
B2, B3
[Bulk]
Vertical Crimp Short (Fig. 1)
Straight Short (Fig. 2)
ød
Fig. 1
D1, DD
3.0 max.
0.5±0.05
Fig. 2
D3
3.0 max.
0.6±0.05
Fig. 2
9
■ Marking
Temp. Char.
B
E
F
ø4.5-5mm
221
3KV
102
1KV
102
2KV
ø6mm
331
3KV
66
102
2KV
66
222
1KV
66
ø7-9mm
102K
3KV
66
102Z
3KV
66
472Z
2KV
66
ø10-16mm
B
332K
3KV
66
E
472Z
3KV
66
103Z
2KV
66
Nominal Body Diameter
Temperature Characteristics
Nominal Capacitance
Capacitance Tolerance
Rated Voltage
Manufacturer's Identification
Manufactured Date Code
44
Marked with code for char. B and E (omitted for nominal body diameter ø9mm and under)
Marked with 3 figures
Marked with code (omitted for nominal body diameter ø6mm and under)
Marked with code (In case of DC3.15kV, marked with 3KV)
Marked with
Style
Up to the end of crimp 0.6±0.05
(omitted for nominal body diameter ø9mm and under)
Abbreviation (omitted for nominal body diameter ø5mm and under)
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
B Characteristics
Part Number
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Lead
Body Thickness T
Package
(mm)
Long Bulk
Lead
Package
Short Bulk
Lead
Package
Taping
DEBB33A101Kppp
1000
100 ±10%
4.5
5.0
4.0
C1B
D1B
P2A
DEBB33A151Kppp
1000
150 ±10%
4.5
5.0
DEBB33A221Kppp
1000
220 ±10%
4.5
5.0
4.0
C1B
D1B
P2A
4.0
C1B
D1B
DEBB33A331Kppp
1000
330 ±10%
4.5
P2A
5.0
4.0
C1B
D1B
DEBB33A471Kppp
1000
470 ±10%
P2A
5
5.0
4.0
C1B
D1B
DEBB33A681Kppp
1000
P2A
680 ±10%
6
5.0
4.0
A2B
B2B
N2A
DEBB33A102Kppp
DEBB33A152Kppp
1000
1000 ±10%
6
5.0
4.0
A2B
B2B
N2A
1000
1500 ±10%
8
5.0
4.0
A2B
B2B
N2A
DEBB33A222Kppp
1000
2200 ±10%
9
5.0
4.0
A2B
B2B
N2A
DEBB33A332Kppp
1000
3300 ±10%
10
5.0
4.0
A2B
B2B
N2A
DEBB33A472Kppp
1000
4700 ±10%
12
7.5
4.0
A3B
B3B
N3A
DEBB33A682Kppp
1000
6800 ±10%
15
7.5
4.0
A3B
B3B
N7A
DEBB33D101Kppp
2000
100 ±10%
4.5
5.0
5.0
C1B
D1B
P2A
DEBB33D151Kppp
2000
150 ±10%
4.5
5.0
5.0
C1B
D1B
P2A
DEBB33D221Kppp
2000
220 ±10%
4.5
5.0
5.0
C1B
D1B
P2A
DEBB33D331Kppp
2000
330 ±10%
5
5.0
5.0
C1B
D1B
P2A
DEBB33D471Kppp
2000
470 ±10%
6
5.0
5.0
A2B
B2B
N2A
DEBB33D681Kppp
2000
680 ±10%
7
5.0
5.0
A2B
B2B
N2A
DEBB33D102Kppp
2000
1000 ±10%
8
5.0
5.0
A2B
B2B
N2A
DEBB33D152Kppp
2000
1500 ±10%
9
5.0
5.0
A2B
B2B
N2A
DEBB33D222Kppp
2000
2200 ±10%
10
5.0
5.0
A2B
B2B
N2A
DEBB33D332Kppp
2000
3300 ±10%
12
7.5
5.0
A3B
B3B
N3A
DEBB33D472Kppp
2000
4700 ±10%
15
7.5
5.0
A3B
B3B
N7A
DEBB33F101Kppp
3150
100 ±10%
5
7.5
6.0
CDB
DDB
P3A
DEBB33F151Kppp
3150
150 ±10%
5
7.5
6.0
CDB
DDB
P3A
DEBB33F221Kppp
3150
220 ±10%
5
7.5
6.0
CDB
DDB
P3A
DEBB33F331Kppp
3150
330 ±10%
6
7.5
6.0
C3B
D3B
P3A
DEBB33F471Kppp
3150
470 ±10%
7
7.5
6.0
C3B
D3B
P3A
DEBB33F681Kppp
3150
680 ±10%
8
7.5
6.0
A3B
B3B
N3A
DEBB33F102Kppp
3150
1000 ±10%
9
7.5
6.0
A3B
B3B
N3A
DEBB33F152Kppp
3150
1500 ±10%
11
7.5
6.0
A3B
B3B
N3A
DEBB33F222Kppp
3150
2200 ±10%
13
7.5
6.0
A3B
B3B
N3A
DEBB33F332Kppp
3150
3300 ±10%
15
7.5
6.0
A3B
B3B
N7A
Lead
Package
Short Bulk
Lead
Package
Taping
9
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
E Characteristics
Part Number
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Lead
Body Thickness T
Package
(mm)
Long Bulk
DEBE33A102Zppp
1000
1000 +80/-20%
5
5.0
4.0
C1B
D1B
P2A
DEBE33A222Zppp
1000
2200 +80/-20%
7
5.0
4.0
A2B
B2B
N2A
DEBE33A472Zppp
1000
4700 +80/-20%
9
5.0
4.0
A2B
B2B
N2A
DEBE33A103Zppp
1000
10000 +80/-20%
13
7.5
4.0
A3B
B3B
N3A
DEBE33D102Zppp
2000
1000 +80/-20%
6
5.0
5.0
A2B
B2B
N2A
DEBE33D222Zppp
2000
2200 +80/-20%
8
5.0
5.0
A2B
B2B
N2A
DEBE33D472Zppp
2000
4700 +80/-20%
11
5.0
5.0
A2B
B2B
N2A
DEBE33D103Zppp
2000
10000 +80/-20%
16
7.5
5.0
A3B
B3B
N7A
DEBE33F102Zppp
3150
1000 +80/-20%
7
7.5
6.0
C3B
D3B
P3A
DEBE33F222Zppp
3150
2200 +80/-20%
10
7.5
6.0
A3B
B3B
N3A
DEBE33F472Zppp
3150
4700 +80/-20%
13
7.5
6.0
A3B
B3B
N3A
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
45
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
F Characteristics
Part Number
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Lead
Body Thickness T
Package
(mm)
Long Bulk
Lead
Package
Short Bulk
Lead
Package
Taping
DEBF33A222Zppp
1000
2200 +80/-20%
6
5.0
4.0
A2B
B2B
N2A
DEBF33A472Zppp
1000
4700 +80/-20%
7
5.0
DEBF33A103Zppp
1000
10000 +80/-20%
10
5.0
4.0
A2B
B2B
N2A
4.0
A2B
B2B
DEBF33D102Zppp
2000
1000 +80/-20%
5
N2A
5.0
5.0
C1B
D1B
DEBF33D222Zppp
2000
2200 +80/-20%
P2A
7
5.0
5.0
A2B
B2B
N2A
DEBF33D472Zppp
2000
4700 +80/-20%
9
5.0
5.0
A2B
B2B
N2A
DEBF33D103Zppp
2000
10000 +80/-20%
12
7.5
5.0
A3B
B3B
N3A
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
9
46
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEB Series Specifications and Test Methods
No.
Item
Specifications
Test Method
1
Operating Temperature Range
-25 to +85°C
2
Appearance and Dimensions
No marked defect on appearance form
and dimensions are within specified
range.
3
Marking
To be easily legible
The capacitor should be visually inspected.
No failure
The capacitor should not be damaged when DC voltage of
200% of the rated voltage is applied between the lead wires for
1 to 5 sec. (Charge/Discharge currentV50mA)
No failure
The capacitor is placed in the container
with metal balls of diameter 1mm so that
each lead wire, short circuited, is kept
about 2mm off the metal balls as shown in
the figure at right, and DC voltage of 1.3kV
is applied for 1 to 5 sec. between capacitor
lead wires and metal balls.
(Charge/Discharge currentV50mA)
Between Lead
Wires
4
Dielectric
Strength
Body Insulation
The insulation resistance should be measured with
DC500±50V within 60±5 sec. of charging.
Capacitance
Within specified tolerance
The capacitance should be measured at 20°C with 1±0.2kHz
and AC5V(r.m.s.) max.
Dissipation Factor (D.F.)
Char. B, E: 2.5% max.
Char. F: 5.0% max.
The dissipation factor should be measured at 20°C with
1±0.2kHz and AC5V(r.m.s.) max.
Char. B: Within ±10%
Char. E: Within +20/-55%
Char. F: Within +30/-80%
The capacitance measurement should be made at each step
specified in Table.
Insulation
Resistance (I.R.)
6
7
Between Lead
Wires
Temperature Characteristics
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at
room condition* for 24±2 hrs. before measurements.
1
2
3
4
5
Step
20±2
-25±3
20±2
85±2
20±2
Temp. (°C)
Pull
9
Lead wire should not be cut off.
Capacitor should not be broken.
Strength of Lead
11
12
Vibration
Resistance
Appearance
No marked defect
Capacitance
Within specified tolerance
D.F.
Char. B, E: 2.5% max.
Char. F: 5.0% max.
Solderability of Leads
Soldering Effect
(Non-Preheat)
As shown in the figure at right, fix the body of
the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N (5N for
lead diameter 0.5mm), and keep it for 10±1
sec.
9
W
Each lead wire should be subjected to 5N (2.5N for lead
diameter 0.5mm) of weight and bent 90° at the point of egress,
in one direction, then returned to its original position and bent
90° in the opposite direction at the rate of one bend in 2 to 3
sec.
Bending
10
About 2mm
Metal balls
10000MΩ min.
5
8
The capacitor should be visually inspected for evidence of
defect. Dimensions should be measured with slide calipers.
Lead wire should be soldered with
uniform coating on the axial direction
over 3/4 of the circumferential direction.
Appearance
No marked defect
Capacitance
Change
Char. B: Within ±5%
Char. E: Within ±15%
Char. F: Within ±20%
Dielectric Strength
(Between Lead
Wires)
Per item 4.
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1 minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,
2 hrs. each in 3 mutually perpendicular directions.
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
sec. In both cases the depth of dipping is up to about 1.5 to
2mm from the root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
The lead wire should be immersed into the melted solder of
350±10°C (Body of ø5mm and under: 270±5°C) up to about 1.5
to 2mm from the main body for 3.5±0.5 sec.
(Body of ø5mm and under: 5±0.5 sec.)
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
before initial measurements.
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition*.
* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
47
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEB Series Specifications and Test Methods
Continued from the preceding page.
No.
13
14
9
15
16
17
Item
Specifications
Appearance
No marked defect
Capacitance
Change
Char. B: Within ±5%
Char. E: Within ±15%
Char. F: Within ±20%
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Appearance
No marked defect
Capacitance
Change
Char. B: Within ±10%
Char. E: Within ±20%
Char. F: Within ±30%
D.F.
Char. B, E: 4.0% max.
Char. F: 7.5% max.
I.R.
2000MΩ min.
Soldering Effect
(On-Preheat)
Temperature
and Immersion
Cycle
Humidity (Under
Steady State)
Humidity
Loading
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Appearance
No marked defect
Capacitance
Change
Char. B: Within ±10%
Char. E: Within ±20%
Char. F: Within ±30%
D.F.
Char. B, E: 5.0% max.
Char. F: 7.5% max.
I.R.
1000MΩ min.
Appearance
No marked defect
Capacitance
Change
Char. B: Within ±10%
Char. E: Within ±20%
Char. F: Within ±30%
D.F.
Char. B, E: 5.0% max.
Char. F: 7.5% max.
I.R.
500MΩ min.
Appearance
No marked defect
Capacitance
Change
Char. B: Within ±10%
Char. E: Within ±20%
Char. F: Within ±30%
D.F.
Char. B, E: 4.0% max.
Char. F: 7.5% max.
I.R.
2000MΩ min.
Life
Test Method
First the capacitor should be
, Capacitor
Thermal
stored at 120+0/-5°C for
Screen,
,
60+0/-5 sec.
,
,
,,,,,,,,,,
, 1.5
,,,,,,
Then, as in figure, the lead wires
,,,,,,,,,,
,,,,
,
, to 2.0mm
,
should be immersed in solder of
,,,Molten
260+0/-5°C up to 1.5 to 2.0mm
Solder
from the root of terminal for
7.5+0/-1 sec.
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
before initial measurements.
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition*.
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Step
1
2
3
4
Step Temperature (°C) Time (min) Immersion Water
1
65+5/-0
15
Clean water
2
0±3
15
Salt water
Cycle time : 2 cycle
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
before initial measurements.
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition*.
Set the capacitor for 500+24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
before initial measurements.
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*.
Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in 90 to
95% relative humidity. (Charge/Discharge currentV50mA)
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
before initial measurements.
Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
Apply a DC voltage of 150% of the rated voltage for
1000+48/-0 hrs. at 85±2°C with a relative humidity of 50% max.
(Charge/Discharge currentV50mA)
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
before initial measurements.
Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
48
Temperature (°C) Time (min)
-25±3
30
Room Temp.
3
85±3
30
Room Temp.
3
Cycle time: 5 cycle
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors
DEC Series (Class 1, 2/DC6.3kV)
■ Features
Coated with flame-retardant epoxy resin
(equivalent to UL94V-0 standard).
T max.
T max.
4.0 max.
D max.
25.0 min.
■ Applications
1. Ideal for use as the ballast in back lighting
inverters for liquid crystal displays (SL Char.).
2. Ideal for use on high voltage circuits such as
Cockcroft circuits (B Char.).
25.0 min.
e
F±1.0
ød
(in mm)
[Bulk]
Vertical Crimp Long (Fig. 1)
Straight Long (Fig. 2)
Lead Code Coating Extension e
A3
ød
Style
Up to the end of crimp 0.6±0.05
Fig. 1
0.6±0.05
Fig. 2
3.0 max.
C4
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
■ Marking
Temp. Char.
SL
Nominal Body Diameter
B
ø7mm
10J
6KV
ø8-9mm
47J
6KV
66
331K
6KV
66
ø10-15mm
151J
6KV
66
B
102K
6KV
66
Temperature Characteristics
E
10
222Z
6KV
66
Marked with code for char. B (omitted for nominal body diameter ø9mm and under)
Under 100pF: Actual value, 100pF and over: Marked with 3 figures
Nominal Capacitance
Capacitance Tolerance
Marked with code
Marked with code (In case of DC6.3kV, marked with 6KV)
Rated Voltage
Manufacturer's Identification
Manufactured Date Code
Marked with
(omitted for nominal body diameter ø9mm and under)
Abbreviation (omitted for nominal body diameter ø7mm)
SL Characteristics
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
DEC1X3J100JA3BMS1
6300
10 ±5%
DEC1X3J100JC4BMS1
6300
10 ±5%
DEC1X3J120JA3B
6300
DEC1X3J120JC4B
Lead Spacing F
(mm)
Body Thickness T
(mm)
7
7.5
7.0
7
10.0
7.0
12 ±5%
8
7.5
7.0
6300
12 ±5%
8
10.0
7.0
DEC1X3J150JA3B
6300
15 ±5%
8
7.5
7.0
DEC1X3J150JC4B
6300
15 ±5%
8
10.0
7.0
DEC1X3J180JA3B
6300
18 ±5%
9
7.5
7.0
DEC1X3J180JC4B
6300
18 ±5%
9
10.0
7.0
DEC1X3J220JA3B
6300
22 ±5%
9
7.5
7.0
DEC1X3J220JC4B
6300
22 ±5%
9
10.0
Part Number
7.0
Continued on the following page.
49
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
DEC1X3J270JA3B
6300
27 ±5%
DEC1X3J270JC4B
6300
27 ±5%
DEC1X3J330JA3B
6300
DEC1X3J330JC4B
Lead Spacing F
(mm)
Body Thickness T
(mm)
9
7.5
7.0
9
10.0
7.0
33 ±5%
9
7.5
7.0
6300
33 ±5%
9
10.0
7.0
DEC1X3J390JA3B
6300
39 ±5%
9
7.5
7.0
DEC1X3J390JC4B
6300
39 ±5%
9
10.0
7.0
DEC1X3J470JA3B
6300
47 ±5%
9
7.5
7.0
DEC1X3J470JC4B
6300
47 ±5%
9
10.0
7.0
DEC1X3J560JC4B
6300
56 ±5%
10
10.0
7.0
DEC1X3J680JC4B
6300
68 ±5%
12
10.0
7.0
DEC1X3J820JC4B
6300
82 ±5%
12
10.0
7.0
DEC1X3J101JC4B
6300
100 ±5%
13
10.0
7.0
DEC1X3J121JC4B
6300
120 ±5%
14
10.0
7.0
DEC1X3J151JC4B
6300
150 ±5%
15
10.0
7.0
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
DECB33J101KC4B
6300
100 ±10%
9
10.0
7.0
DECB33J151KC4B
6300
150 ±10%
9
10.0
7.0
DECB33J221KC4B
6300
220 ±10%
9
10.0
7.0
DECB33J331KC4B
6300
330 ±10%
9
10.0
7.0
DECB33J471KC4B
6300
470 ±10%
10
10.0
7.0
DECB33J681KC4B
6300
680 ±10%
11
10.0
7.0
DECB33J102KC4B
6300
1000 ±10%
13
10.0
7.0
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
DECE33J102ZC4B
6300
1000 +80/-20%
11
10.0
7.0
DECE33J222ZC4B
6300
2200 +80/-20%
15
10.0
7.0
Part Number
B Characteristics
Part Number
E Characteristics
Part Number
10
50
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEC Series Specifications and Test Methods
No.
Item
Specifications
Test Method
1
Operating Temperature Range
-25 to +85°C
2
Appearance and Dimensions
No marked defect on appearance form
and dimensions are within specified
range.
3
Marking
To be easily legible
The capacitor should be visually inspected.
No failure
The capacitor should not be damaged when DC voltage of
200% of the rated voltage is applied between the lead wires for
1 to 5 sec. (Charge/Discharge currentV50mA)
No failure
The capacitor is placed in the container
with metal balls of diameter 1mm so that
each lead wire, short circuited, is kept
about 2mm off the metal balls as shown in
the figure at right, and DC voltage of 1.3kV
is applied for 1 to 5 sec. between capacitor
lead wires and metal balls.
(Charge/Discharge currentV50mA)
Between Lead
Wires
4
Dielectric
Strength
Body Insulation
About 2mm
Metal balls
10000MΩ min.
The insulation resistance should be measured with
DC500±50V within 60±5 sec. of charging.
Capacitance
Within specified tolerance
The capacitance should be measured at 20°C with 1±0.2kHz
(Char. SL: 1±0.2MHz) and AC5V(r.m.s.) max.
Q
Char. SL: 400+20C*2min. (30pF under)
1000 min. (30pF min.)
Dissipation Factor (D.F.)
Char. B, E: 2.5% max.
5
Insulation
Resistance (I.R.)
6
Between Lead
Wires
7
Char. SL: +350 to -1000ppm/°C
(Temp. range: +20 to +85°C)
Char. B: Within ±10%
Char. E: Within +20/-55%
8
The capacitor should be visually inspected for evidence of
defect. Dimensions should be measured with slide calipers.
The dissipation factor and Q should be measured at 20°C with
1±0.2kHz (Char. SL: 1±0.2MHz) and AC5V(r.m.s.) max.
The capacitance measurement should be made at each step
specified in Table.
Temperature Characteristics
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at
room condition*1 for 24±2 hrs. before measurements. (Char. B, E)
1
2
3
4
5
Step
20±2
-25±3
20±2
85±2
20±2
Temp. (°C)
Pull
9
Lead wire should not be cut off.
Capacitor should not be broken.
Strength of Lead
10
11
12
Appearance
No marked defect
Capacitance
Within specified tolerance
Q
Char. SL: 400+20C*2min. (30pF under)
1000 min. (30pF min.)
D.F.
Char. B, E: 2.5% max.
Solderability of Leads
Lead wire should be soldered with
uniform coating on the axial direction
over 3/4 of the circumferential direction.
Appearance
No marked defect
Capacitance
Change
Char. SL: Within ±2.5%
Char. B: Within ±5%
Char. E: Within ±15%
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Soldering Effect
(Non-Preheat)
W
10
Each lead wire should be subjected to 5N of weight and bent
90° at the point of egress, in one direction, then returned to its
original position and bent 90° in the opposite direction at the
rate of one bend in 2 to 3 sec.
Bending
Vibration
Resistance
As shown in the figure at right, fix the body of
the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N and keep
it for 10±1 sec.
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1 minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,
2 hrs. each in 3 mutually perpendicular directions.
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
sec. In both cases the depth of dipping is up to about 1.5 to
2mm from the root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
The lead wire should be immersed into the melted solder of
350±10°C up to about 1.5 to 2mm from the main body for
3.5±0.5 sec.
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*1. (Char. SL)
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition*1. (Char. B, E)
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
51
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEC Series Specifications and Test Methods
Continued from the preceding page.
No.
13
14
10
15
16
17
Item
Specifications
Appearance
No marked defect
Capacitance
Change
Char. SL: Within ±2.5%
Char. B: Within ±5%
Char. E: Within ±15%
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Appearance
No marked defect
Capacitance
Change
Char. SL: Within ±3%
Char. B: Within ±10%
Char. E: Within ±20%
Q
Char. SL: 275+5/2C*2min. (30pF under)
350 min. (30pF min.)
D.F.
Char. B, E: 4.0% max.
I.R.
2000MΩ min.
Soldering Effect
(On-Preheat)
Temperature
and Immersion
Cycle
Humidity (Under
Steady State)
Humidity
Loading
Life
Test Method
First the capacitor should be
, Capacitor
Thermal
stored at 120+0/-5°C for
Screen,
,
60+0/-5 sec.
,
,
,,,,,,,,,,
, 1.5
,,,,,,
Then, as in figure, the lead wires
,,,,,,,,,,
,,,,
,
, to 2.0mm
,
should be immersed in solder of
,,,Molten
260+0/-5°C up to 1.5 to 2.0mm
Solder
from the root of terminal for
7.5+0/-1 sec.
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*1. (Char. SL)
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition*1. (Char. B, E)
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Step
1
2
3
4
Step Temperature (°C) Time (min) Immersion Water
1
65+5/-0
15
Clean water
2
0±3
15
Salt water
Cycle time: 2 cycle
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Appearance
No marked defect
Capacitance
Change
Char. SL: Within ±5%
Char. B: Within ±10%
Char. E: Within ±20%
Q
Char. SL: 275+5/2C*2min. (30pF under)
350 min. (30pF min.)
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition*1.
D.F.
Char. B, E: 5.0% max.
I.R.
1000MΩ min.
Appearance
No marked defect
Capacitance
Change
Char. SL: Within ±7.5%
Char. B: Within ±10%
Char. E: Within ±20%
Q
Char. SL:
100+10/3C*2min. (30pF under)
200 min. (30pF min.)
D.F.
Char. B, E: 5.0% max.
I.R.
500MΩ min.
Appearance
No marked defect
Capacitance
Change
Char. SL: Within ±3%
Char. B: Within ±10%
Char. E: Within ±20%
Q
Char. SL: 275+5/2C*2min. (30pF under)
350 min. (30pF min.)
D.F.
Char. B, E: 4.0% max.
I.R.
2000MΩ min.
Set the capacitor for 500+24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*1.
Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in 90 to
95% relative humidity. (Charge/Discharge currentV50mA.)
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*1. (Char. SL)
Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
(Char. B, E)
Apply a DC voltage of 150% of the rated voltage for
1000+48/-0 hrs. at 85±2°C with a relative humidity of 50% max.
(Charge/Discharge currentV50mA.)
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*1. (Char. SL)
Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
(Char. B, E)
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
52
Temperature (°C) Time (min)
-25±3
30
Room Temp.
3
85±3
30
Room Temp.
3
Cycle time: 5 cycle
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors
DEF Series (Only for LCD Backlight Inverter Circuit/6.3kVp-p)
D max.
1. We design capacitors in much more compact size than
DEC series, having reduced the diameter by 20% max.
2. Low self-heating at high frequency and high voltage
due to low dielectric loss of the ceramic material.
3. Operating temperature range is guaranteed up to 105
degrees C.
4. Coated with flame-retardant epoxy resin
(equivalent to UL94V-0 standard).
5. Taping available for automatic insertion.
T max.
4.0 max.
■ Features
25.0 min.
e
F±1.0
ød
(in mm)
[Bulk]
Vertical Crimp Long (A3)
Lead Code
Coating Extension e
ød
A3
Up to the end of crimp
0.6±0.05
■ Applications
Ideal for use in LCD backlight inverter.
D max.
ød
1.0
3.5±0.5
e
4.0 max.
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
T max.
F±0.8
(in mm)
[Bulk]
Vertical Crimp Short (J3)
Lead Code
Coating Extension e
ød
J3
Up to the end of crimp
0.6±0.05
■ Marking
Temp. Char.
CH
SL
10J
6K~
66
33J
6K~
66
Upper horizontal line
–
Nominal Body Diameter
ø7-9mm
Temperature Characteristics
Nominal Capacitance
11
Actual value
Capacitance Tolerance
Marked with code
Rated Voltage
Marked with code (Marked with 6K~)
Manufactured Date Code
Abbreviation
SL Characteristics
Part Number
Rated
Voltage
(Vp-p)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Lead
Body Thickness T
Package
(mm)
Long Bulk
Lead
Package
Short Bulk
Lead
Package
Taping
DEF1XLH100Jppp
6300
10 ±5%
7
7.5
6.0
DEF1XLH120Jppp
6300
12 ±5%
7
7.5
6.0
A3B
J3B
N3A
A3B
J3B
DEF1XLH150Jppp
6300
15 ±5%
7
7.5
N3A
6.0
A3B
J3B
DEF1XLH180Jppp
6300
18 ±5%
7
N3A
7.5
6.0
A3B
J3B
N3A
DEF1XLH220Jppp
6300
22 ±5%
DEF1XLH270Jppp
6300
27 ±5%
7
7.5
6.0
A3B
J3B
N3A
8
7.5
6.0
A3B
J3B
DEF1XLH330Jppp
6300
N3A
33 ±5%
9
7.5
6.0
A3B
J3B
DEF1XLH390Jppp
N3A
6300
39 ±5%
9
7.5
6.0
A3B
J3B
DEF1XLH470Jppp
N3A
6300
47 ±5%
9
7.5
6.0
A3B
J3B
N3A
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
53
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CH Characteristics
Part Number
Rated
Voltage
(Vp-p)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Lead
Body Thickness T
Package
(mm)
Long Bulk
Lead
Package
Short Bulk
Lead
Package
Taping
DEF2CLH020Cppp
6300
2 ±0.25pF
7
7.5
6.0
A3B
J3B
N3A
DEF2CLH030Cppp
6300
3 ±0.25pF
7
7.5
DEF2CLH040Cppp
6300
4 ±0.25pF
7
7.5
6.0
A3B
J3B
N3A
6.0
A3B
J3B
DEF2CLH050Dppp
6300
5 ±0.5pF
7
N3A
7.5
6.0
A3B
J3B
DEF2CLH060Dppp
6300
6 ±0.5pF
N3A
7
7.5
6.0
A3B
J3B
DEF2CLH070Dppp
6300
N3A
7 ±0.5pF
8
7.5
6.0
A3B
J3B
N3A
DEF2CLH080Dppp
DEF2CLH090Dppp
6300
8 ±0.5pF
8
7.5
6.0
A3B
J3B
N3A
6300
9 ±0.5pF
8
7.5
6.0
A3B
J3B
DEF2CLH100Jppp
N3A
6300
10 ±5%
8
7.5
6.0
A3B
J3B
N3A
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
11
54
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEF Series Specifications and Test Methods
No.
Item
Specifications
Test Method
1
Operating Temperature Range
-25 to +105°C
2
Appearance and Dimensions
No marked defect on appearance form
and dimensions are within specified
range.
3
Marking
To be easily legible
The capacitor should be visually inspected.
No failure
The capacitor should not be damaged when DC12.6kV is
applied between the lead wires for 1 to 5 sec.
(Charge/Discharge currentV50mA)
No failure
The capacitor is placed in the container
with metal balls of diameter 1mm so that
each lead wire, short circuited, is kept
about 2.0mm off the metal balls as shown
in the figure at right, and DC voltage of
1.3kV is applied for 1 to 5 sec. between
capacitor lead wires and metal balls.
(Charge/Discharge currentV50mA)
Between Lead
Wires
4
Dielectric
Strength
Body Insulation
Capacitance
Within specified tolerance
The capacitance should be measured at 20°C with 1±0.2MHz
and AC5V(r.m.s.) max.
Q
400+20C*2min. (30pF under)
1000 min. (30pF min.)
The Q should be measured at 20°C with 1±0.2MHz and
AC5V(r.m.s.) max.
Char. CH: 0±60ppm/°C
Char. SL: +350 to -1000ppm/°C
(Temp. range: +20 to +85°C)
The capacitance measurement should be made at each step
specified in Table.
6
7
Between Lead
Wires
Temperature Characteristics
Step
Temp. (°C)
1
20±2
Pull
Lead wire should not be cut off.
Capacitor should not be broken.
Strength of Lead
11
12
Vibration
Resistance
Appearance
No marked defect
Capacitance
Within specified tolerance
Q
400+20C*2min. (30pF under)
1000 min. (30pF min.)
Solderability of Leads
Soldering Effect
(Non-Preheat)
2
-25±3
3
20±2
4
85±2
5
20±2
As shown in the figure at right, fix the body of
the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N and keep
it for 10±1 sec.
W
Each lead wire should be subjected to 5N of weight and bent
90° at the point of egress, in one direction, then returned to its
original position and bent 90° in the opposite direction at the
rate of one bend in 2 to 3 sec.
Bending
10
Metal balls
The insulation resistance should be measured with
DC500±50V within 60±5 sec. of charging.
Insulation
Resistance (I.R.)
9
About
2.0mm
10000MΩ min.
5
8
The capacitor should be visually inspected for evidence of
defect. Dimensions should be measured with slide calipers.
Lead wire should be soldered with
uniform coating on the axial direction
over 3/4 of the circumferential direction.
Appearance
No marked defect
Capacitance
Change
Within ±2.5%
Dielectric Strength
(Between Lead
Wires)
Per item 4.
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1 minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,
2 hrs. each in 3 mutually perpendicular directions.
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
sec. In both cases the depth of dipping is up to about 1.5 to
2.0mm from the root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
The lead wire should be immersed into the melted solder of
350±10°C up to about 1.5 to 2.0mm from the main body for
3.5±0.5 sec.
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*1.
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
55
11
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEF Series Specifications and Test Methods
Continued from the preceding page.
No.
13
14
Item
Soldering Effect
(On-Preheat)
Temperature
and Immersion
Cycle
Specifications
Appearance
No marked defect
Capacitance
Change
Within ±2.5%
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Appearance
No marked defect
Capacitance
Change
Within ±3%
Q
200+10C*2min. (10pF under)
275+5/2C*2min. (10pF min. and 30pF under)
350 min. (30pF min.)
I.R.
2000MΩ min.
Test Method
First the capacitor should be
, Capacitor
Thermal
stored at 120+0/-5°C for
Screen,
,
60+0/-5 sec.
,
,
,,,,,,,,,,
, 1.5
,,,,,,
Then, as in figure, the lead wires
,,,,,,,,,,
,,,,
,
, to 2.0mm
,
should be immersed in solder of
,,,Molten
260+0/-5°C up to 1.5 to 2.0mm
Solder
from the root of terminal for
7.5+0/-1 sec.
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*1.
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Step
1
2
3
4
Temperature (°C) Time (min)
-25±3
30
Room Temp.
3
105±3
30
Room Temp.
3
Cycle time: 5 cycle
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Step
1
2
Temperature (°C) Time (min) Immersion Water
65+5/-0
15
Clean water
0±3
15
Salt water
Cycle time: 2 cycle
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition*1.
15
Appearance
No marked defect
Capacitance
Change
Within ±5%
Humidity (Under
Steady State)
Q
I.R.
1000MΩ min.
Appearance
No marked defect
Capacitance
Change
16
11
Life
Set the capacitor for 500 +24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
200+10C* min. (10pF under)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
275+5/2C*2min. (10pF min. and 30pF under)
room condition*1.
350 min. (30pF min.)
2
Q
I.R.
Apply 6.3kVp-p at the frequency in Table for 1000+48/-0 hrs. at
105±2°C with a relative humidity of 50% max.
(Charge/Discharge currentV50mA.)
200+10C*2min. (10pF under)
Capacitance (pF)
Frequency (kHz)
2
275+5/2C* min. (10pF min. and 30pF under)
to 10
100
350 min. (30pF min.)
12 to 22
45
27 to 47
33
Within ±3%
2000MΩ min.
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*1.
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
56
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors Characteristics Data (Typical Example)
■ Capacitance - Temperature Characteristics
CH, SL, B, E, F char.
C, D, R char.
20
20
10
SL
CH
B
Cap. Change (%)
D
CH
SL
B
-10
10
-20
-30
-40
E
E
-50
C
R
Cap. Change (%)
0
0
-10
-60
-70
-80
F
-20
F
R
C
-90
-100
-40
-20
0
20
40
60
Temp. (°C)
80
100
120
-30
-40
-20
0
20
40
60
Temperature (°C)
80
100
D
120
140
■ Capacitance - DC Bias Characteristics
20
DESD33A471KA2B
DEA1X3D221JA2B
0
Cap. Change (%)
DEHR33D102KA3B
-20
-40
DEBB33D102KA2B
-60
DEBE33D222ZA2B
-80
-100
0
500
1000
DC Bias (V)
1500
2000
11
57
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors Packaging
■ Taping Specifications
15.0mm pitch / lead spacing 7.5mm taping
Straight type
(Lead Code: P3)
∆S
e
L
W0
12.7mm pitch / lead spacing 5.0mm taping
Straight type
(Lead Code: P2)
∆S
P2
∆S
D
P
e
øD0
∆S
R
P0
W
L
F
H0
P3
∗
N3
H0
Lead Code
N3
Except DEF Series
Code
W
∗
Lead Code
N2, N3, N7
øD0
Item
11
∗
∗
W0 W2
H0
W1
P1
ød
∆h2
3.0 max.
D
P
e
P2
O
∆h1
T max.
Marked
side
Lead Code P2, P3
t1
12.7mm pitch / lead spacing 5.0mm taping
Vertical crimp type
(Lead Code: N2)
øD0
R
P0
4.0 max.
R
ød
F
L
L
P0
P1
W0 W2
H
W1
ød
F
W0 W2
H0
W1
W
P1
t2
D
e
P
øD0
R
P0
30.0mm pitch / lead spacing 7.5mm taping
Vertical crimp type
(Lead Code: N7)
P2
ød
F
øD0
R
P0
P1
W
W0
L
W2
ød
F
H
W1
P1
∆S
D
P
P2
H0
W1
W
D
W2
P
e
P2
15.0mm pitch / lead spacing 7.5mm taping
Vertical crimp type
(Lead Code: N3)
DEF Series
P2
N7
N2
Pitch of component
P
Pitch of sprocket hole
P0
15.0±0.3
12.7±0.3
Lead spacing
F
7.5±1.0
5.0+0.8
–0.2
Length from hole center to component center
P2
7.5±1.5
6.35±1.3
Length from hole center to lead
P1
3.75±1.0
3.85±0.7
Body diameter
D
See the individual product specifications.
Deviation along tape, left or right
∆S
Carrier tape width
W
Position of sprocket hole
W1
Lead distance between reference
and bottom planes
H
H0
15.0
12.7
30.0
0±2.0
0±1.0
18.0±0.5
9.0±0.5
20.0 +1.5
–1.0
—
20.0 +1.5
–1.0
—
—
18.0 +2.0
–0
—
18.0 +2.0
–0
r
+0.5 to -1.0
Diameter of sprocket hole
φD0
4.0±0.1
Lead diameter
φd
0.6±0.05
Total tape thickness
t1
0.6±0.3
Total thickness, tape and lead wire
t2
1.5 max.
Body thickness
T
See the individual product specifications.
Portion to cut in case of defect
L
Protrusion length
11.0
+0
–1.0
Hold down tape width
W0
Hold down tape position
W2
1.5±1.5
e
3.0 max. (Vertical crimp type: Up to the end of crimp)
Coating extension on lead
Deviation across tape, front
∆h1
Deviation across tape, rear
∆h2
11.5 min.
2.0 max.
1.0 max.
(in : mm)
Continued on the following page.
58
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors Packaging
Continued from the preceding page.
■ Packaging Styles
Bulk
Polyethylene Bag
Taping
Ammo Pack
■ Minimum Quantity (Order in Sets Only)
[Bulk] 1,000 pcs.
[Taping]
1,500 pcs. (Lead Code: P2, N2)
1,000 pcs. (Lead Code: P3, N3*)
500 pcs. (Lead Code: N7)
* 900 pcs. for 2kV, 3.15kV and DEF Series
■ Minimum Order Quantity
[Bulk] 3,000 pcs.
[Taping]
3,000 pcs. (Lead Code: P2, N2)
3,000 pcs. (Lead Code: P3, N3*)
2,000 pcs. (Lead Code: N7)
* 2,700 pcs. for 2kV, 3.15kV and DEF Series
“Minimum Quantity” means the numbers of units of each delivery or order. The
quantity should be an integral multiple of the “minimum quantity”. (Please note
that the actual delivery quantity in a package may change sometimes.)
11
59
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors !Caution
■ !Caution (Rating)
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p which contains DC bias within
the rated voltage range.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to use
a capacitor with a rated voltage range that includes these
irregular voltages.
When using the low-dissipation DEA (SL Char.) /DEC (SL
Char.) /DEH (C, R Char.) /DES (D Char.) series in a highfrequency and high-voltage circuit, be sure to read the
instructions in item 4.
Voltage
Positional
Measurement
11
DC Voltage
V0-p
DC+AC Voltage
V0-p
When DC-rated capacitors are to be used in input circuits
from commercial power source (AC filter), be sure to use
Safety Certified Capacitors because various regulations
on withstand voltage or impulse withstand established for
each equipment should be taken into considerations.
AC Voltage
Vp-p
Pulse Voltage (1)
Vp-p
Pulse Voltage (2)
Vp-p
2. Operating Temperature and Self-generated Heat
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range. Be
sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a highfrequency current, pulse current or similar current, it may
self-generate heat due to dielectric loss. The frequency of
the applied sine wave voltage should be less than
300kHz. The applied voltage load (*) should be such that
the capacitor's self-generated heat is within 20°C in an
atmosphere temperature of 25°C. When measuring, use
a thermocouple of small thermal capacity-K of ø0.1mm in
conditions where the capacitor is not affected by radiant
heat from other components or surrounding ambient
fluctuations.
Excessive heat may lead to deterioration of the
capacitor's characteristics and reliability.
(Never attempt to perform measurement with the cooling
fan running. Otherwise, accurate measurement cannot
be ensured.)
*Before using the low-dissipation DEA/DEC (SL Char.)
/DEH/DES series, be sure to read the instructions in
item 4.
3. Fail-Safe
When capacitor is broken, failure may result in a short
circuit. Be sure to provide an appropriate fail-safe
function like a fuse on your product if failure would follow
an electric shock, fire or fume.
Continued on the following page.
60
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors !Caution
Continued from the preceding page.
Allowable Conditions at High-frequency
DC
Temp.
Rated
Char.
Voltage
R
250V
250Vp-p
10°C Max.
C
500V
500Vp-p
20°C Max.
800Vp-p
20°C Max.
1000Vp-p
5°C Max.
1400Vp-p
20°C Max.
2000Vp-p
5°C Max.
1kV
DEH
R
2kV
3.15kV
DEA
DEC
DES
Applied
Self-heating Temp.
Voltage (Max.) (25°C Ambient Temp.) *1
SL
SL
D
1600Vp-p
20°C Max.
3150Vp-p
5°C Max.
1kV
1000Vp-p
2kV
2000Vp-p
3.15kV
3150Vp-p
6.3kV
6300Vp-p
500V
500Vp-p
1kV
800Vp-p
1000Vp-p
Capacitor's
Ambient
Temp. *2
-25 to +85°C
* Subject series are below.
· DEA/DEC (SL char.) /DEH/DES/DEF Series
FAILURE TO FOLLOW THE ABOVE CAUTIONS (ITEMS 1
TO 4) MAY RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION WHEN
THE PRODUCT IS USED.
Relationship Between Applied Voltage and
Self-heating Temperature (Allowable Self-heating
Temp. at 25°C Ambient Temp.)
DEH Series R Char. (Rated Voltage: DC1kV to 3.15kV)
25
20
15
10
5
0
100
11
Rated Voltage: 1kV
2kV
3.15kV
1000
Applied Voltage (Vp-p)
10000
5°C Max.
5°C Max.
15°C Max.
5°C Max.
*1 Fig. 1 shows the relationship between the applied voltage and the allowable selfheating temperature regarding 1 to 3.15kV rated voltage of the DEH series R
characteristic and 1kV rated voltage of the DES series D characteristic.
*2 When the ambient temperature is 85 to 125°C, the applied voltage needs to be
further reduced. If the DEA/DEH/DES series needs to be used at an ambient
temperature of 85 to 125°C, please contact our sales representatives or product
engineers.
*3 Fig. 3 shows reference data on the allowable voltage - frequency characteristics
for a sine wave voltage.
DES Series D Char. (Rated Voltage: DC1kV)
Allowable Self-heating Temp. (°C)
Series
Allowable Conditions
at High-frequency *3
We are offering free software, The Capacitor Selection
Tool: by Voltage Form* which will assist you in selecting
a suitable capacitor.
The software can be downloaded from Murata's Internet
Web site.
(http://www.murata.com/designlib/mmcsv_e.html)
By inputting capacitance values and applied voltage
waveform of the specific capacitor series, this software
will calculate the capacitor's power consumption and list
suitable capacitors.
When the result of this software is different from the
measurement result of the self-heating temperature on
your side, please contact our sales representatives or
product engineers.
Allowable Self-heating Temp. (°C)
4. Load Reduction and Self-generated Heat During
Application of High-frequency and High-voltage
Due to the low self-heating characteristics of lowdissipation capacitors, the allowable electric power of
these capacitors is generally much higher than that of B
characteristic capacitors. However, in case the selfheating temperature is 20°C under a high-frequency
voltage whose peak-to-peak value equals the capacitor's
rated voltage, the capacitor's power consumption may
exceed its allowable electric power.
Therefore, when using the DEA/DEC (SL Char.) /DEH
/DES series in a high-frequency and high-voltage circuit
with a frequency of 1kHz or higher, make sure that the
Vp-p values including the DC bias, do not exceed the
applied voltage value specified in Table 1. Also make
sure that the self-heating temperature (the difference
between the capacitor's surface temperature and the
capacitor's ambient temperature ) at an ambient
temperature of 25°C does not exceed the value specified
in Table 1.
As shown in Fig. 2, the self-heating temperature
depends on the ambient temperature. Therefore, if you
are not able to set the ambient temperature to
approximately 25°C, please contact our sales
representatives or product engineers.
25
20
15
10
5
0
100
Rated Voltage: DC1kV
1000
Applied Voltage (Vp-p)
10000
Continued on the following page.
61
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors !Caution
Continued from the preceding page.
Dependence of Self-heating Temperature on
Ambient Temperature
DEH Series C Char. and R Char. (Rated Voltage: DC1kV to 3.15kV)
DEH Series R Char. (Rated Voltage: DC250V) and
DEA/DEC Series SL Char. (Rated Voltage: DC1kV to 6.3kV)
20
Self-heating Temperature (°C)
Self-heating Temperature (°C)
25
20
15
C Char. (500V)
R Char. (1 to 3.15kV)
10
5
0
15
10
R Char. (250V)
5
SL Char. (1 to 6.3kV)
0
20 (25)
0
40
60
80
100
Ambient Temperature (°C)
0
20 (25)
40
60
80
100
Ambient Temperature (°C)
DES Series D Char.
(Rated Voltage: DC500V to 1kV)
Self-heating Temperature (°C)
25
20
15
D Char. (500V to 1kV)
10
5
0
0
20 (25)
40
60
80
100
Ambient Temperature (°C)
Continued on the following page.
11
62
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors !Caution
Continued from the preceding page.
Allowable Voltage (Sine Wave Voltage) - Frequency Characteristics (At Ambient Temperature of 85°C or less)
Because of the influence of harmonics, when the applied
to the allowable voltage for a sine wave whose fundamental
voltage is a rectangular wave or pulse wave voltage (instead
frequency is twice as large as that of the rectangular wave or
of a sine wave voltage), the heat generated by the capacitor
pulse wave. This allowable voltage, however, varies
is higher than the value obtained by application of the sine
depending on the voltage and current waveforms.
wave with the same fundamental frequency.
Therefore, you are requested to make sure that the selfRoughly calculated for reference, the allowable voltage for a
heating temperature is not higher than the value specified in
rectangular wave or pulse wave corresponds approximately
Table 1.
DEH Series R Char. (Rated Voltage: DC250V)
DEH Series C Char. (Rated Voltage: DC500V)
10000
Allowable Voltage (Vp-p)
Allowable Voltage (Vp-p)
10000
1000
1000
to 470pF
(500)
1000pF
to 2200pF
4700pF
(250)
2200pF
4700pF
10000pF
100
1
10
Frequency (kHz)
100
100
1000
DEH Series R Char. (Rated Voltage: DC1kV)
10
Frequency (kHz)
100
220pF
470pF
1000pF
2200pF
Allowable Voltage (Vp-p)
10000
1000
1000
220pF
470pF
1000pF
2200pF
1
10
Frequency (kHz)
100
1000
11
4700pF
4700pF
100
1000
DEH Series R Char. (Rated Voltage: DC2kV)
10000
Allowable Voltage (Vp-p)
1
100
1
10
Frequency (kHz)
100
1000
DEH Series R Char. (Rated Voltage: DC3.15kV)
Allowable Voltage (Vp-p)
10000
(3150)
1000
220pF
470pF
1000pF
2200pF
100
1
10
Frequency (kHz)
100
1000
Continued on the following page.
63
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors !Caution
Continued from the preceding page.
Allowable Voltage (Sine Wave Voltage) Frequency Characteristics
(At Ambient Temperature of 85°C or less)
Because of the influence of harmonics, when the applied
voltage is a rectangular wave or pulse wave voltage
(instead of a sine wave voltage), the heat generated by
the capacitor is higher than the value obtained by
application of the sine wave with the same fundamental
frequency.
Roughly calculated for reference, the allowable voltage
for a rectangular wave or pulse wave corresponds
approximately to the allowable voltage for a sine wave
whose fundamental frequency is twice as large as that of
the rectangular wave or pulse wave.
This allowable voltage, however, varies depending on the
voltage and current waveforms.
Therefore, you are requested to make sure that the selfheating temperature is not higher than the value specified
in Table 1.
DEA Series SL Char. (Rated Voltage: DC1kV)
DEA Series SL Char. (Rated Voltage: DC2kV)
10000
to 100pF
220pF
470pF
1000
100
1
10
Frequency (kHz)
100
Allowable Voltage (Vp-p)
Allowable Voltage (Vp-p)
10000
1000
100
1000
DEA Series SL Char. (Rated Voltage: DC3.15kV)
10pF
100pF
220pF
470pF
1
10
Frequency (kHz)
100
DEC Series SL Char. (Rated Voltage: DC6.3kV)
10000
10000
(3150)
10pF
100pF
220pF
1000
100
Allowable Voltage (Vp-p)
Allowable Voltage (Vp-p)
(6300)
11
1000
1
10
Frequency (kHz)
100
1000
to 22pF
47pF
100pF
1000
100
1
10
Frequency (kHz)
100
1000
Continued on the following page.
64
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors !Caution
Continued from the preceding page.
Allowable Voltage (Sine Wave Voltage) Frequency Characteristics
(At Ambient Temperature of 85°C or less)
Because of the influence of harmonics, when the applied
voltage is a rectangular wave or pulse wave voltage
(instead of a sine wave voltage), the heat generated by
the capacitor is higher than the value obtained by
application of the sine wave with the same fundamental
frequency.
Roughly calculated for reference, the allowable voltage
for a rectangular wave or pulse wave corresponds
approximately to the allowable voltage for a sine wave
whose fundamental frequency is twice as large as that of
the rectangular wave or pulse wave.
This allowable voltage, however, varies depending on the
voltage and current waveforms.
Therefore, you are requested to make sure that the selfheating temperature is not higher than the value specified
in Table 1.
DES Series D Char. (Rated Voltage: DC500V)
DES Series D Char. (Rated Voltage: DC1kV)
10000
1000
(500)
100
to 1000pF
2200pF
4700pF
1
10
Frequency (kHz)
100
1000
Allowable Voltage (Vp-p)
Allowable Voltage (Vp-p)
10000
100pF
220pF
470pF
1000pF
2200pF
4700pF
1000
100
1
10
Frequency (kHz)
100
1000
Continued on the following page.
11
65
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors !Caution
Continued from the preceding page.
1. Operating Voltage
The frequency of the applied sine wave voltage should be
less than 100kHz. The applied voltage should be less
than the value shown in figure below. In case of non-sine
wave which includes a harmonic frequency, please
contact our sales representatives or product engineers.
10000
to 10pF
Allowable Voltage (Vp-p)
(6300)
12 to 22pF
27 to 47pF
Positional
Measurement
1
10
Frequency (kHz)
100
2. Operating Temperature and Self-generated Heat
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range.
Be sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a highfrequency current, pulse current or similar current, it may
self-generate heat due to dielectric loss.
Excessive heat may lead to deterioration of the
capacitor's characteristics and reliability. (Never attempt
to perform measurement with the cooling fan running.
Otherwise, accurate measurement cannot be ensured.)
3. Fail-Safe
When capacitor is broken, failure may result in a short
circuit. Be sure to provide an appropriate fail-safe
function like a fuse on your product if failure could result
in an electric shock, fire or fume.
66
The capacitor can be applied maximum
6.3kVp-p at 100kHz when lamp turn on.
Voltage
1000
11
The temperature of the surface of capacitor:
below the upper limit of its rated operating temperature
range (including self-heating.)
AC Voltage
Vp-p
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors !Caution
■ !Caution (Storage and Operating Condition)
Operating and Storage Environment
The insulating coating of capacitors does not form a
perfect seal; therefore, do not use or store
capacitors in a corrosive atmosphere, especially
where chloride gas, sulfide gas, acid, alkali, salt
or the like are present. And avoid exposure to
moisture. Before cleaning, bonding or molding this
product, verify that these processes do not affect
product quality by testing the performance of a
cleaned, bonded or molded product in the intended
equipment. Store the capacitors where the
temperature and relative humidity do not exceed -10
to 40 degrees centigrade and 15 to 85%.
Use capacitors within 6 months after delivery.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
■ !Caution (Soldering and Mounting)
1. Vibration and Impact
Do not expose a capacitor or its leads to
excessive shock or vibration during use.
2. Soldering
When soldering this product to a PCB/PWB, do not
exceed the solder heat resistance specification of
the capacitor. Subjecting this product to excessive
heating could melt the internal junction solder and
may result in thermal shocks that can crack the
ceramic element.
When soldering capacitor with a soldering iron, it
should be performed in following conditions.
Temperature of iron-tip: 400 degrees C. max.
Soldering iron wattage: 50W max.
Soldering time: 3.5 sec. max.
3. Bonding, Resin Molding and Coating
Before bonding, molding or coating this product,
verify that these processes do not affect the
quality of capacitor by testing the performance
of the bonded, molded or coated product in the
intended equipment.
In case the amount of applications,
dryness/hardening conditions of adhesives and
molding resins containing organic solvents
(ethyl acetate, methyl ethyl ketone, toluene, etc.)
are unsuitable, the outer coating resin of a
capacitor is damaged by the organic solvents and
it may result, worst case, in a short circuit.
The variation in thickness of adhesive, molding
resin or coating may cause outer coating resin
cracking and/or ceramic element cracking of a
capacitor in a temperature cycling.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
■ !Caution (Handling)
11
Vibration and Impact
Do not expose a capacitor or its leads to excessive
shock or vibration during use.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
67
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors Notice
■ Notice (Soldering and Mounting)
Cleaning (ultrasonic cleaning)
To perform ultrasonic cleaning, observe the following
conditions.
Rinse bath capacity: Output of 20 watts per liter or less.
Rinsing time: 5 min. maximum.
Do not vibrate the PCB/PWB directly.
Excessive ultrasonic cleaning may lead to fatigue
destruction of the lead wires.
■ Notice (Rating)
Capacitance Change of Capacitor
1. DEA/DEC/DEF Series (Temp. Char. CH, SL)
Capacitance might change a little depending on the
surrounding temperature or an applied voltage.
Please contact us if you intend to use this
product in a strict time constant circuit.
2. DEB/DEC Series (Temp. Char. B, E, F)
Capacitors have an aging characteristic, whereby
the capacitor continually decreases its
capacitance slightly if the capacitor is left on
for a long time. Moreover, capacitance might
11
68
change greatly depending on the surrounding
temperature or an applied voltage. So, it is not
likely to be suitable for use in a time constant
circuit.
Please contact us if you need detailed information.
3. DEH/DES Series
Capacitance might change greatly depending on the
surrounding temperature or an applied voltage.
So, it is not likely to be suitable for use in a
time constant circuit. Please contact us if you
need detailed information.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C85E.pdf
08.10.29
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors ISO9000 Certifications
Manufacturing plants which produce the products in this
catalog have obtained the ISO9000 quality system certificate.
Plant
Applied Standard
Izumo Murata Manufacturing Co., Ltd.
ISO9001
Murata Electronics (Thailand), Ltd.
ISO9001
Taiwan Murata Electronics Co., Ltd.
ISO9001
11
69
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C85E.pdf
08.10.29
工商网监
湘ICP备2023018690号
