DHS4E4D881MHXB

o Part Numbering Safety Standard Certifiedultilayer Ceramic Capacitors (Part Number) GA3 52 Q R7 GF 1 2 3 4 331 5 6 K W31 L 7 8 9 1Series Code Series EVA Safety Standard Certified Resin Molding SMD Type Multilayer Ceramic Capacitors for Automotive (Powertrain/Safety) GA3 Safety Standard Certified Chip Multilayer Ceramic Capacitors for Consumer Electronics & Industrial Equipment KCA Safety Standard Certified Metal Terminal Type Multilayer Ceramic Capacitors for Automotive (Powertrain/Safety) 2Dimensions (L×W) 3Dimensions (T) Code Dimensions (L×W) 42 4.5×2.0mm 43 52 GA3 KCA, EVA Code Dimensions (T) 4.5×3.2mm A 5.7×2.8mm D 55 5.7×5.0mm 86 8.0×6.0mm As for KCA and EVA series, it represents the dimensions of the product body that does not include the metal terminal. Code Dimensions (T) 1.0mm L 2.8mm 2.0mm Q 3.7mm E 2.5mm T 4.8mm Q 1.5mm W 6.4mm X Depends on individual standards. 4Temperature Characteristics Temperature Characteristic Codes Public STD Code Code Temperature Characteristics Capacitance Change or Temperature Coefficient Reference Temperature Temperature Range Operating Temperature Range Capacitance Change Each Temperature (%) –55°C *2 –10°C Max. Min. Max. Min. Max. - - - - - - Min. 1X SL JIS 20°C 20 to 85°C 7U U2J EIA 25°C 25 to 125°C*1 -750±120ppm/°C -55 to 125°C 8.78 5.04 6.04 3.47 3.84 2.21 R7 X7R EIA 25°C -55 to 125°C ±15% -55 to 125°C - - - - - - +350 to -1000ppm/°C -55 to 125°C *1 Rated Voltage 100Vdc max: 25 to 85°C *2 –25°C (Reference Temperature 20°C) / –30°C (Reference Temperature 25°C) 5Certified Type 7Capacitance Tolerance Code Rated Voltage Certified Type Code GB X2 : 250Vac Type GB J ±5% GD 250Vac Type GD K ±10% GF X1 : 250Vac/Y2 : 250Vac Type GF M ±20% MF X1 : 250Vac/1000Vdc Y2 : 250Vac/1000Vdc Type MF TF X1 : 305Vac/1500Vdc Y2 : 305Vac/1500Vdc Type TF Capacitance Tolerance 8Individual Specification Expressed by three figures. 9Packaging 6Capacitance Expressed by three-digit alphanumerics. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two numbers. If there is a decimal point, it is expressed by the capital letter "R." In this case, all figures are significant digits. If any letter, other than "R" is included, this indicates the specific part number is a non-standard part. Ex.) Code Capacitance R50 0.50pF 1R0 1.0pF 100 10pF 103 10000pF Code Packaging L ø180mm Embossed Taping K ø330mm Embossed Taping Please contact us if you find any part number not provided in this table.