DLP1NDN900HL4B

Noise Suppression Products/EMI Suppression Filters > Common Mode Choke Coil > Film Type (Array) Data Sheet 1 Common Mode Choke Coil Film Type (Array) DLP1ND Series (05025 Size) c Dimensions c Impedance-Frequency Characteristics (Main Items) 10000 0.2±0.1 0.4±0.1 Common mode (4) (5) (6) (7) (8) Impedance (Ω) (3) 0.45±0.05 (2) 0.1 min. (1) 0.65±0.1 0.2±0.1 1000 DLP1NDN900HL4 DLP1NDN670HL4 DLP1NDN350HL4 100 DLP1NDN350HL4 10 DLP1NDN670HL4 1.5±0.1 DLP1NDN900HL4 Differential mode 1 : Electrode 1 10 100 Frequency (MHz) (in mm) c Equivalent Circuit 1000 10000 c Differential Mode Transmission Characteristics 0 (1) (2) (3) (4) -2 Insertion Loss (dB) DLP1NDN900HL4 -4 -6 -8 (5) (6) (7) (8) -10 10 No polarity. 100 1000 10000 Frequency (MHz) c Packaging Code Packaging Minimum Quantity L 180mm Embossed Tape 5000 B Bulk(Bag) 500 c Rated Value (p: packaging code) Part Number Operating Common Mode Impedance Rated Current Rated Voltage Insulation Resistance (min.) Withstand Voltage DC Resistance Temperature Range (at 100MHz/20°C) DLP1NDN350HL4p 35ohm ±20% 100mA 5Vdc 100M ohm 12.5Vdc 1.8ohm±25% -40 to +85°C DLP1NDN670HL4p 67ohm ±20% 80mA 5Vdc 100M ohm 12.5Vdc 2.9ohm±25% -40 to +85°C DLP1NDN900HL4p 90ohm ±20% 60mA 5Vdc 100M ohm 12.5Vdc 3.7ohm±25% -40 to +85°C Number of Circuit: 2 Continued on the following page. oThis data sheet is applied for CHIP COMMON MODE CHOKE COIL used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.7.5 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > Common Mode Choke Coil > Film Type (Array) Data Sheet 2 Continued from the preceding page. c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP COMMON MODE CHOKE COIL used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.7.5 http://www.murata.com/