DLP31DN201ML4L.

Noise Suppression Products/EMI Suppression Filters > Chip Common Mode Choke Coils > Film Type Array Data Sheet 1 Chip Common Mode Choke Coils Film Type Array DLP31D Series (1206 Size) ■ Dimension ■ Impedance-Frequency Characteristics 10000 1.15±0.15 Common mode Impedance (Ω) (1) (2) (3) 0.3±0.2 0.8±0.1 0.4±0.2 (4) DLP31DN441ML4 DLP31DN321ML4 DLP31DN201ML4 DLP31DN131ML4 DLP31DN900ML4 1000 100 DLP31DN441ML4 1.6±0.15 DLP31DN321ML4 (5) (6) 10 (8) (7) DLP31DN900ML4 DLP31DN131ML4 DLP31DN201ML4 Differential mode 1 1 10 3.2±0.15 ■ Equivalent circuit (1) (5) 100 1000 Frequency (MHz) (in mm) ■ Packaging (2) (6) (3) (7) Code Packaging Minimum Quantity L 180mm Embossed Tape 3000 B Bulk(Bag) 500 (4) (8) No polarity. ■ Rated Value (p: packaging code) Part Number Common Mode Impedance Rated Current Rated Voltage (at 100MHz/20°C) Insulation Resistance (min.) Withstand Voltage DC Resistance Operating Number of Circuit Temperature Range DLP31DN900ML4p 90ohm±20% 160mA 10Vdc 100M ohm 25Vdc 1.1ohmmax. -40°C to 85°C 2 DLP31DN131ML4p 130ohm±20% 120mA 10Vdc 100M ohm 25Vdc 1.6ohmmax. -40°C to 85°C 2 DLP31DN201ML4p 200ohm±20% 100mA 10Vdc 100M ohm 25Vdc 2.2ohmmax. -40°C to 85°C 2 DLP31DN321ML4p 320ohm±20% 80mA 10Vdc 100M ohm 25Vdc 3.5ohmmax. -40°C to 85°C 2 DLP31DN441ML4p 440ohm±20% 70mA 10Vdc 100M ohm 25Vdc 4.3ohmmax. -40°C to 85°C 2 ■ !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. o This data sheet is applied for CHIP COMMON MODE CHOKE COIL used for General Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2006.3.9 http://www.murata.com/