ECASD60E477M006K00

Polymer Aluminum Electrolytic Capacitors - ECAS series - C90E.pdf Sep. 20,2023 !Note • Please read rating and !CAUTION (for storage and usage environment, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please check the details of the delivery specifications before ordering. Description Murata Manufacturing Co., Ltd.'s ECAS series of polymer aluminum electrolytic capacitors realize low ESR, low impedence and high capacitance by means of multilayered aluminum foil for anode, solid conductive polymer for cathode. With no bias characteristics and stable temperature characteristics, ECAS series have excellent performance in ripple absorption, smoothing and transient response suitable for numerous applications. Therefore, it is suitable for smoothing of input-output current of various power supply circuits, and the backup use over the load change of the CPU circumference. This contributes to reduction of the number of parts, or reduction of substrate area. External Dimensions Appearance L W T Polarity Indicator Bar (+) Capacitance Code Rated Voltage Code S S W1 (in mm) Case Size EIA Metric Ex.) 220µF/2V Example of Structure (+) (-) Epoxy Resin ESR (ohm) at 100kHz 7343 7.3±0.3 4.3±0.2 1.9±0.1 2.4±0.2 1.3±0.2 D6 7343 7.3±0.3 4.3±0.2 2.8±0.3 2.4±0.2 1.3±0.2 7.3±0.3 4.3±0.2 1.4±0.1 2.4±0.2 1.3±0.2 Al Capacitor (Can Type/ Electrolyte) Ta Capacitor (Polymer) Cathode Conductive Polymer Capacitance Range : 15 to 470µF Operating Temperature: -55°C (-40°C) to +105°C Rated Voltage : 2 to 25Vdc ESR : 4.5 to 40mΩ Features ECAS series Aluminum Electrolytic Capacitor Al Capacitor (H-Chip Type/Polymer) (Can Type/Polymer) 0.01 MLCC 0.001 10 (-) Specifications Ta Capacitor (MnO2) 1 7343 Anode Aluminum Capacitor Map (Cap & ESR) 0.1 S D4 (+) Carbon Paste Silver Paste 1 W1 Dielectric Al Oxidized Film External Electrodes 10 T D3 Conductive Polymer External Electrodes 100 W Capacitor Model Etched Aluminum Foil Al Oxidized Film L 100 Capacitance (µF) at 120Hz 1000 10000 High capacitance and Low ESR Stable capacitance with applied DC voltage/temperature/high frequencies Excellent Ripple absorption, Smoothing, Transient response No voltage derating required Polarity bar (positive) noted on product Surface mount construction RoHS compliant Halogen free MSL 3 packaging 2 C90E.pdf Sep. 20,2023 !Note • Please read rating and !CAUTION (for storage and usage environment, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please check the details of the delivery specifications before ordering. Characteristics Low ESR & Z 10 Z Representative Data Capacitance Change (%) ESR or Z (Ω) 1 0.1 0.01 ESR 0.001 1 10 100 1,000 DC Bias Characteristics 40 ECASD60E477M006K00 ECASD60J337M009KA0 ECASD41E336M040KA0 10,000 100,000 20 0 -20 -40 -60 0 Frequency (kHz) 40 25 50 75 100 Bias Voltage/Rated Voltage (%) Temperature Characteristics of Capacitance Capacitance Change (%) Representative Data 20 0 -20 -40 -60 -50 No Bias 50% of Rated Voltage -25 0 25 50 75 100 125 Temperature (°C) Design Support Tool - SimSurfing https://www.murata.com/simsurfing/ - Frequency responses (Z, ESR, ESL) of ECAS Series are available. - Netlist and S-parameter can be downloaded. - The software "SimSurfing" is also available for your simulation on the go where no internet connection is available. 3 C90E.pdf Sep. 20,2023 !Note • Please read rating and !CAUTION (for storage and usage environment, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please check the details of the delivery specifications before ordering. Applications Market Set/Application Overall Power Management Notebook/Ultrabook Consumer CPU/GPU_PC Ex.1) Power Supply line around IC etc... Panel_TV/Display (LCD/OLE) Game Console Power Supply Wireless Charger IoT (UWB) Target Drone Server Enterprise CPU ASIC FPGA etc Enterprise HDD/SSD Enterprise Display (LED) V V Cap t Multi Function Printer POS/Handy Terminal ESL•ESR V Security (Camera/Home) Smart Meter IC on I t t Eliminates Ripple Smoothes Voltage Source Stabilizes Voltage Source Eliminates High Frequency Noise from IC Production Equipment/Module Industrial PLC Ex.2) USB bus power line Industrial PC Robotics Power Tool Peak Power Assistance Base Station (Wireless) Network G-PON (Optical) USB2.0 USB3.0 IC 5V USB Port Power supply from ECAS I Target PoE Switch/ Router t Medical Equipment Others Power supply from Battery IVI, V2X Part Numbering (Part Number) ECAS D4 0D 227 M 009 K 00 1 2 3 4 5 6 7 8 1Series Product ID ECAS Polymer AI Electrolytic Capacitor 2Dimension (LxWxT) (mm) Code L W T D3 7.3±0.3 4.3±0.2 1.4±0.1 D4 7.3±0.3 4.3±0.2 1.9±0.1 D6 7.3±0.3 4.3±0.2 2.8±0.3 3Rated Voltage Code 4 Rated Voltage 0D DC 2V 0E DC 2.5V 0J DC 6.3V 1A DC 10V 1C DC 16V 1E DC 25V 4Capacitance Expressed by three-digit numeric code. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two numbers. Ex.) Code Capacitance 476 47µF 107 100µF 227 220µF 477 470µF 5Capacitance Tolerance Code Capacitance Tolerance M ±20% 6ESR Expressed by three-digit alphanumerics. The unit is milli-ohm (mΩ). If there is a decimal point, it is expressed by the capital letter "R". Ex.) Code ESR 4R5 4.5mΩ 009 9mΩ 010 10mΩ 7Packaging Code Packaging K ø330mm Embossed Taping 8Individual Specification Code Expressed by two figures. C90E.pdf Sep. 20,2023 !Note • Please read rating and !CAUTION (for storage and usage environment, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please check the details of the delivery specifications before ordering. Specifications and Test Methods No. 1 Item Operating Temperature Range Characteristics Test Conditions -55°C (-40°C) to +105°C — Series resistor : 1000 ohm Applied voltage: Rated Voltage Measuring after 2 minutes of application Please conduct pre-conditioning below, if you have a doubt. Pre-conditioning: Apply rated DC voltage for 1 hour at 105°C through 1000 ohm series resistor. Then discharge and keep in the room temperature for 4 to 24 hours. 2 Leakage Current < =The value of "Part Number Listing" 3 Capacitance Tolerance Please refer to "Part Number Listing" 4 Dissipation Factor < =0.06 5 ESR < =The value of "Part Number Listing" Measuring frequency : 100kHz ±10% Measuring voltage : no more than +1Vr.m.s. Measuring temperature: 25°C 6 Allowable Ripple Current Please refer to "Part Number Listing" Measuring frequency: 100kHz ±10% 7 Solderability More than 75% of each terminal face is covered by new solder Lead Free Solder : Sn/3.0Ag/0.5Cu Flux : Rosin 25%, IPA 75% Solder temperature: 245 ±3°C Immersing time : 3 ±0.3s 8 Moisture Resistance Under No Bias 9 Moisture Resistance Under Load Leakage Current < =300% of initial specified value (There are some exceptions) Capacitance Change -20% and +50% of initial measured value Dissipation Factor < =0.12 Appearance No defects or abnormalities < =The value of "Part Number Listing" Leakage Current Capacitance Change Dissipation Factor Appearance Leakage Current 10 Shelf Life Capacitance Change Dissipation Factor Appearance Leakage Current 11 Endurance Capacitance Change Dissipation Factor Appearance Leakage Current Capacitance Change 12 -20% and +50% of initial measured value < =0.12 No defects or abnormalities < =The value of "Part Number Listing" ±10% of initial measured value < =0.06 No defects or abnormalities < =The value of "Part Number Listing" ±20% of initial measured value < =0.06 No defects or abnormalities < =The value of "Part Number Listing" Dissipation Factor ±10% of initial measured value < =0.06 Appearance No defects or abnormalities Surge Measuring frequency : 120Hz ±10% Measuring circuit : Equivalent series circuit Measuring voltage : +1Vr.m.s. Measuring temperature: 25°C Test temperature: 60±2°C Relative humidity : 90 to 95%RH Test time : 500+24, -0h Test temperature: 60±2°C Relative humidity : 90 to 95%RH Test time : 500+24, -0h Applied voltage : Rated Voltage Test temperature: 105±2°C Test time : 1000+48, -0h Test temperature: 105±2°C Test time : 2000+48, -0h Applied voltage : Rated Voltage Temperature: +85°C for 2V to 10V products Room temp. for 16V to 25V products Applied voltage: Rated voltage x1.25 Current limiting resistance: 33 ohm (in series) for 2V to 10V products 1k ohm (in series) for 16V to 25V products Discharge resistance: 33 ohm (in series) for 2V to 10V products 1k ohm (in series) for 16V to 25V products Charge on/off: 30 sec. each, 1000 times (The measurement condition in No.2 to 4 applies to No.8 to 12.) 5 C90E.pdf Sep. 20,2023 !Note • Please read rating and !CAUTION (for storage and usage environment, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please check the details of the delivery specifications before ordering. Recommended Reflow Profile Land Pattern Design 10sec. max. (Peak Temp.: 260°C max.) Temp. (°C) 250 Capacitor 2.8 200 60-150sec. (217°C up) 150 120sec. max. (150°C to 200°C) 100 50 4.0 Max temperature 260°C (245°C for some part numbers), two times. Please contact Murata for reflow conditions except for the above. 0 8.8 (in mm) Time (sec.) W 4.0±0.1 1.5 +0.1 –0 2.0±0.1 Polarity D 2.0±0.5 (-) ø13±0.2 1.5+0.25 –0 C A 8.0±0.1 ø21±0.8 (+) W1 (in mm) Cavity Size (mm) Case Size A* B* C* D* Minimum Qty. (pcs.) D3, D4 4.60 7.65 2.16 0.23 3,000 D6 4.60 7.65 3.20 0.27 2,500 A B B 12.0±0.3 5.5±0.1 1.75±0.1 Packaging Reel Size Tape Width ø330 12 A B 330.0±2.0 100.0±1.0 (in mm) W W1 17.4±1.5 13.4±1.5 * Nominal values 6 C90E.pdf Sep. 20,2023 !Note • Please read rating and !CAUTION (for storage and usage environment, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please check the details of the delivery specifications before ordering. Part Number Listing Case Size Part Number Ripple Current (Arms) ESR Min. Rated Max. Leakage Cap. Cap. Packaging Voltage (mΩ) Current Tolerance (µF) Quantity LxW T 100kHz (µA) 45°C