ESD5381 Series
ESD Protection Diode
Micro−Packaged Diodes for ESD Protection
The ESD5381 series are designed to protect voltage sensitive
components from ESD. Excellent clamping capability, low leakage,
and fast response time provide best in class protection on designs that
are exposed to ESD. Because of their small size, they are suited for use
in cellular phones, MP3 players, digital cameras and many other
portable applications where board space comes at a premium.
www.onsemi.com
1
Cathode
Specification Features
•
•
•
•
•
•
•
•
•
Low Capacitance
Low Clamping Voltage
Small Body Outline Dimensions: 0.60 mm x 0.30 mm
Low Body Height: 0.3 mm
Low Leakage
Response Time is < 1 ns
IEC61000−4−2 Level 4 ESD Protection
IEC61000−4−4 Level 4 EFT Protection
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
MARKING
DIAGRAM
PIN 1
X3DFN2
CASE 152AF
ORDERING INFORMATION
Device Meets MSL 1 Requirements
MAXIMUM RATINGS
IEC 61000−4−2 (ESD)
Contact
Air
Value
Unit
8
kV
Total Power Dissipation on FR−5 Board
(Note 1) @ TA = 25°C
Thermal Resistance, Junction−to−Ambient
°PD°
300
mW
RqJA
400
°C/W
Junction and Storage Temperature Range
TJ, Tstg
−55 to +150
°C
TL
260
°C
Lead Solder Temperature − Maximum
(10 Second Duration)
Package
Shipping†
ESD5381MUT5G
X3DFN2
(Pb−Free)
10000 /
Tape & Reel
ESD5382MUT5G
X3DFN2
(Pb−Free)
10000 /
Tape & Reel
Device
Symbol
XM
X
= Specific Device Code
M = Date Code
(Specific marking on following page)
Mechanical Characteristics
QUALIFIED MAX REFLOW TEMPERATURE: 260°C
Rating
2
Anode
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. FR−5 = 1.0 x 0.75 x 0.62 in.
See Application Note AND8308/D for further description of survivability specs.
© Semiconductor Components Industries, LLC, 2016
September, 2017 − Rev. 7
1
Publication Order Number:
ESD5381/D
ESD5381 Series
ELECTRICAL CHARACTERISTICS
I
(TA = 25°C unless otherwise noted)
IF
Parameter
Symbol
IPP
Maximum Reverse Peak Pulse Current
VC
Clamping Voltage @ IPP
VRWM
IR
VBR
IT
VC VBR VRWM
Working Peak Reverse Voltage
IR VF
IT
Maximum Reverse Leakage Current @ VRWM
V
Breakdown Voltage @ IT
Test Current
*See Application Note AND8308/D for detailed explanations of
datasheet parameters.
IPP
Uni−Directional
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
VRWM
(V)
IR (nA)
@ VRWM
VBR (V) @ IT
(Note 2)
IT
Device
Marking
Max
Max
Min
mA
Typ
ESD5381MUT5G
J
3.0
100
6.1
1.0
ESD5382MUT5G
K
3.0
50
14.2
1.0
Device
VC (V) @
IPP = 1 A
VC
Max
Max
(Note 3)
Per IEC61000−4−2
(Note 4)
12
13
10.5
Figures 1 and 2
See Below
6
8
26.0
Figures 3 and 4
See Below
C (pF)
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. VBR is measured with a pulse test current IT at an ambient temperature of 25°C.
3. Surge current waveforms per Figure 7.
4. For test procedure see Figures 5 and 6 and Application Note AND8307/D.
www.onsemi.com
2
ESD5381 Series
0
60
−5
−10
−15
40
VOLTAGE (V)
VOLTAGE (V)
50
30
20
−20
−25
−30
−35
−40
10
−45
0
50
100
150
−50
−50
200
0
50
100
150
TIME (ns)
TIME (ns)
Figure 1. ESD5381MUT5G Clamping Voltage
Screenshot Positive 8 kV Contact per
IEC61000−4−2
Figure 2. ESD5381MUT5G Clamping Voltage
Screenshot Negative 8 kV Contact per
IEC61000−4−2
60
0
50
−10
40
−20
VOLTAGE (V)
VOLTAGE (V)
0
−50
30
20
10
200
−30
−40
−50
0
−50
0
50
100
150
200
−60
−50
0
50
100
150
TIME (ns)
TIME (ns)
Figure 3. ESD5382MUT5G Clamping Voltage
Screenshot Positive 8 kV Contact per
IEC61000−4−2
Figure 4. ESD5382MUT5G Clamping Voltage
Screenshot Negative 8 kV Contact per
IEC61000−4−2
www.onsemi.com
3
200
ESD5381 Series
IEC61000−4−2 Waveform
IEC 61000−4−2 Spec.
Ipeak
Level
Test Voltage (kV)
First Peak
Current
(A)
Current at
30 ns (A)
Current at
60 ns (A)
1
2
7.5
4
2
2
4
15
8
4
3
6
22.5
12
6
4
8
30
16
8
100%
90%
I @ 30 ns
I @ 60 ns
10%
tP = 0.7 ns to 1 ns
Figure 5. IEC61000−4−2 Spec
Oscilloscope
ESD Gun
50 W
Cable
50 W
Figure 6. Diagram of ESD Test Setup
The following is taken from Application Note
AND8308/D − Interpretation of Datasheet Parameters
for ESD Devices.
systems such as cell phones or laptop computers it is not
clearly defined in the spec how to specify a clamping voltage
at the device level. ON Semiconductor has developed a way
to examine the entire voltage waveform across the ESD
protection diode over the time domain of an ESD pulse in the
form of an oscilloscope screenshot, which can be found on
the datasheets for all ESD protection diodes. For more
information on how ON Semiconductor creates these
screenshots and how to interpret them please refer to
AND8307/D.
ESD Voltage Clamping
For sensitive circuit elements it is important to limit the
voltage that an IC will be exposed to during an ESD event
to as low a voltage as possible. The ESD clamping voltage
is the voltage drop across the ESD protection diode during
an ESD event per the IEC61000−4−2 waveform. Since the
IEC61000−4−2 was written as a pass/fail spec for larger
% OF PEAK PULSE CURRENT
100
PEAK VALUE IRSM @ 8 ms
tr
90
PULSE WIDTH (tP) IS DEFINED
AS THAT POINT WHERE THE
PEAK CURRENT DECAY = 8 ms
80
70
60
HALF VALUE IRSM/2 @ 20 ms
50
40
30
tP
20
10
0
0
20
40
t, TIME (ms)
60
Figure 7. 8 X 20 ms Pulse Waveform
www.onsemi.com
4
80
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
X3DFN2, 0.62x0.32, 0.355P, (0201)
CASE 152AF
ISSUE A
DATE 17 FEB 2015
SCALE 8:1
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
A B
D
PIN 1
INDICATOR
(OPTIONAL)
DIM
A
A1
b
D
E
e
L2
E
TOP VIEW
0.05 C
A
2X
0.05 C
A1
SIDE VIEW
C
MILLIMETERS
MIN
MAX
0.25
0.33
−−−
0.05
0.22
0.28
0.58
0.66
0.28
0.36
0.355 BSC
0.17
0.23
GENERIC
MARKING DIAGRAM*
SEATING
PLANE
PIN 1
XM
e
1
2X
0.05
M
2
2X
b
X = Specific Device Code
M = Date Code
0.05
L2
M
C A B
RECOMMENDED
MOUNTING FOOTPRINT*
C A B
BOTTOM VIEW
0.74
2X
0.30
1
2X
0.31
DIMENSIONS: MILLIMETERS
See Application Note AND8398/D for more mounting details
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
DOCUMENT NUMBER:
DESCRIPTION:
98AON56472E
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
X3DFN2, 0.62X0.32, 0.355P, (0201)
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative