ESD Protection Diode
Ultra−Low Capacitance
Micro−Packaged Diodes for ESD Protection
ESD7410
The ESD7410 is designed to protect voltage sensitive components
that require ultra−low capacitance from ESD and transient voltage
events. It has industry leading capacitance linearity over voltage
making it ideal for RF applications. This capacitance linearity
combined with the extremely small package and low insertion loss
makes this part well suited for use in antenna line applications for
wireless handsets and terminals.
www.onsemi.com
Features
• Ultra−Low Capacitance: < 1.0 pF Max
•
•
•
•
•
•
•
Industry Leading Capacitance Linearity Over Voltage
Insertion Loss: 0.1 dB at 1 GHz; 0.3 dB at 3 GHz
Low Leakage: < 1 mA
IEC61000−4−2 (ESD): Level 4 ±30 kV Contact
ISO 10605 (ESD) 330 pF/2 kW ±30 kV Contact
SZESD7410MXWT5G − Wettable Flank Package for optimal
Automated Optical Inspection (AOI)
SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
MARKING
DIAGRAM
♦
X2DFN2
CASE 714AB
T
M
TM
= Specific Device Code
= Date Code
X2DFNW2
CASE 711BG
D
M
DM
= Specific Device Code
= Date Code
Typical Applications
• RF Signal ESD Protection
• Active Antenna ESD Protection
• Near Field Communications
ORDERING INFORMATION
Device
Symbol
Value
Unit
IEC 61000−4−2 Contact (Note 1)
IEC 61000−4−2 Air
ISO 10605 Contact (330 pF / 330 W)
ISO 10605 Contact (330 pF / 2 kW)
ISO 10605 Contact (150 pF / 2 kW)
ESD
±30
±30
±30
±30
±30
kV
kV
kV
kV
kV
Total Power Dissipation (Note 2) @ TA = 25°C
Thermal Resistance, Junction−to−Ambient
°PD°
RqJA
300
400
mW
°C/W
TJ, Tstg
−55 to
+150
°C
TL
260
°C
Junction and Storage Temperature Range
Lead Solder Temperature − Maximum
(10 Second Duration)
Shipping†
ESD7410N2T5G
X2DFN2 8000 / Tape &
(Pb−Free)
Reel
SZESD7410N2T5G
X2DFN2 8000 / Tape &
(Pb−Free)
Reel
ESD7410MXWT5G
X2DFNW2 8000 / Tape &
(Pb−Free)
Reel
SZESD7410MXWT5G
X2DFNW2 8000 / Tape &
(Pb−Free)
Reel
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Package
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. Non−repetitive current pulse at TA = 25°C, per IEC61000−4−2 waveform.
2. Mounted with recommended minimum pad size, DC board FR−4
© Semiconductor Components Industries, LLC, 2016
June, 2020 − Rev. 6
1
Publication Order Number:
ESD7410/D
ESD7410
ELECTRICAL CHARACTERISTICS
(TA = 25°C unless otherwise noted)
IPP
Parameter
Symbol
IPP
Maximum Reverse Peak Pulse Current
VC
Clamping Voltage @ IPP
VRWM
IR
VBR
IT
I
IT
VC VBR VRWM IR
IR VRWM VBR VC
IT
Working Peak Reverse Voltage
V
Maximum Reverse Leakage Current @ VRWM
Breakdown Voltage @ IT
IPP
Test Current
Bi−Directional
*See Application Note AND8308/D for detailed explanations of
datasheet parameters.
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Parameter
Reverse Working Voltage
Breakdown Voltage
Symbol
Condition
Min
Typ
VRWM
VBR
IT = 1 mA (Note 3)
Unit
8.0
V
10
V
Reverse Leakage Current
IR
VRWM = 8 V
Clamping Voltage
VC
IEC 61000−4−2, ±8 kV Contact
Clamping Voltage, TLP (Note 4)
VC
IPP = 8 A
IPP = 16 A
IPP = −8 A
IPP = −16 A
Reverse Peak Pulse Current
IPP
IEC 61000−4−2 (8/20 ms)
Clamping Voltage (8/20 ms)
VC
IPP = 5.0 A
18.4
Dynamic Resistance
RDYN
TLP Pulse
1.0
Junction Capacitance
CJ
VR = 0 V, f = 1 MHz
VR = 0 V, f = 1 GHz
0.40
0.35
f = 1 GHz
f = 3 GHz
0.1
0.3
Insertion Loss
Max
1.0
mA
See Figures 1 and 2
V
18
20
−18
−20
V
5.0
A
19.4
V
W
1.0
0.7
pF
dB
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
3. Breakdown voltage is tested from pin 1 to 2 and pin 2 to 1.
4. ANSI/ESD STM5.5.1 − Electrostatic Discharge Sensitivity Testing using Transmission Line Pulse (TLP) Model.
TLP conditions: Z0 = 50 W, tp = 100 ns, tr = 4 ns, averaging window; t1 = 30 ns to t2 = 60 ns.
www.onsemi.com
2
ESD7410
100
10
90
0
80
−10
70
−20
VOLTAGE (V)
VOLTAGE (V)
TYPICAL CHARACTERISTICS
60
50
40
30
−30
−40
−50
20
−60
10
−70
0
−10
−25
0
25
50
75
100
125
150
−80
−90
−25
175
0
25
50
75
100
125
150
175
TIME (ns)
TIME (ns)
Figure 1. Typical IEC61000−4−2 +8 kV Contact
ESD Clamping Voltage
Figure 2. Typical IEC61000−4−2 −8 kV Contact
ESD Clamping Voltage
www.onsemi.com
3
ESD7410
TYPICAL CHARACTERISTICS
1.0
1.E−03
0.9
1.E−04
0.8
CAPACITANCE (pF)
1.E−02
CURRENT (A)
1.E−05
1.E−06
1.E−07
1.E−08
1.E−09
1.E−11
−14 −12 −10 −8 −6 −4 −2
0
2
4
6
0.6
0.5
0.4
0.3
0.1
0
−12 −10 −8
10 12 14
8
−6 −4
−2
0
4
2
6
8
VOLTAGE (V)
VOLTAGE (V)
Figure 3. Typical IV Characteristics
Figure 4. Typical CV Characteristics
1
1.0
0
0.9
−1
0.8
CAPACITANCE (pF)
−2
s21 (dB)
0.7
0.2
1.E−10
−3
−4
−5
−6
−7
0.5
0.4
0.3
−9
−10
0.1
0
1.E+09
1.E+10
VR = 0 V
0.6
0.2
1.E+08
10 12
0.7
−8
1.E+07
f = 1 MHz
0.E+00
1.E+09
2.E+09
3.E+09
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 5. Typical Insertion Loss
ESD7410N2T5G
Figure 6. Typical Capacitance over Frequency
ESD7410N2T5G
www.onsemi.com
4
ESD7410
IEC61000−4−2 Waveform
IEC 61000−4−2 Spec.
Ipeak
Level
Test Voltage (kV)
First Peak
Current
(A)
Current at
30 ns (A)
Current at
60 ns (A)
1
2
7.5
4
2
2
4
15
8
4
3
6
22.5
12
6
4
8
30
16
8
100%
90%
I @ 30 ns
I @ 60 ns
10%
tP = 0.7 ns to 1 ns
Figure 7. IEC61000−4−2 Spec
Device
ESD Gun
Under
Oscilloscope
Test
50 W
50 W
Cable
Figure 8. Diagram of ESD Clamping Voltage Test Setup
The following is taken from Application Note
AND8308/D − Interpretation of Datasheet Parameters
for ESD Devices.
systems such as cell phones or laptop computers it is not
clearly defined in the spec how to specify a clamping voltage
at the device level. ON Semiconductor has developed a way
to examine the entire voltage waveform across the ESD
protection diode over the time domain of an ESD pulse in the
form of an oscilloscope screenshot, which can be found on
the datasheets for all ESD protection diodes. For more
information on how ON Semiconductor creates these
screenshots and how to interpret them please refer to
AND8307/D.
ESD Voltage Clamping
For sensitive circuit elements it is important to limit the
voltage that an IC will be exposed to during an ESD event
to as low a voltage as possible. The ESD clamping voltage
is the voltage drop across the ESD protection diode during
an ESD event per the IEC61000−4−2 waveform. Since the
IEC61000−4−2 was written as a pass/fail spec for larger
www.onsemi.com
5
ESD7410
20
−20
10
−18
18
12
6
10
4
8
6
2
4
0
NOTE:
5
10
15
20
TLP CURRENT (A)
TLP CURRENT (A)
14
−16
−8
EQUIVALENT VIEC (kV)
8
EQUIVALENT VIEC (kV)
16
2
0
−10
−14
−12
−6
−10
−4
−8
−6
−2
−4
−2
0
0
25
0
−5
−10
−15
−20
VC, CLAMPING VOLTAGE (V)
VC, CLAMPING VOLTAGE (V)
Figure 9. Positive TLP I−V Curve
Figure 10. Negative TLP I−V Curve
−25
0
TLP parameter: Z0 = 50 W, tp = 100 ns, tr = 300 ps, averaging window: t1 = 30 ns to t2 = 60 ns. VIEC is the equivalent voltage
stress level calculated at the secondary peak of the IEC 61000−4−2 waveform at t = 30 ns with 2 A/kV. See TLP description
below for more information.
Transmission Line Pulse (TLP) Measurement
L
Transmission Line Pulse (TLP) provides current versus
voltage (I−V) curves in which each data point is obtained
from a 100 ns long rectangular pulse from a charged
transmission line. A simplified schematic of a typical TLP
system is shown in Figure 11. TLP I−V curves of ESD
protection devices accurately demonstrate the product’s
ESD capability because the 10s of amps current levels and
under 100 ns time scale match those of an ESD event. This
is illustrated in Figure 12 where an 8 kV IEC 61000−4−2
current waveform is compared with TLP current pulses at
8 A and 16 A. A TLP I−V curve shows the voltage at which
the device turns on as well as how well the device clamps
voltage over a range of current levels.
50 W Coax
Cable
S Attenuator
÷
50 W Coax
Cable
10 MW
IM
VM
DUT
VC
Oscilloscope
Figure 11. Simplified Schematic of a Typical TLP
System
Figure 12. Comparison Between 8 kV IEC 61000−4−2 and 8 A and 16 A TLP Waveforms
www.onsemi.com
6
ESD7410
PACKAGE DIMENSIONS
X2DFN2 1.0x0.6, 0.65P
CASE 714AB
ISSUE B
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. EXPOSED COPPER ALLOWED AS SHOWN.
0.10 C
A B
D
ÉÉ
PIN 1
INDICATOR
E
DIM
A
A1
b
D
E
e
L
0.05 C
TOP VIEW
A
NOTE 3
0.10 C
0.10 C
A1
C
SIDE VIEW
MILLIMETERS
MIN
NOM MAX
0.34
0.37
0.40
−−−
0.03
0.05
0.45
0.50
0.55
0.95
1.00
1.05
0.55
0.60
0.65
0.65 BSC
0.20
0.25
0.30
RECOMMENDED
SOLDER FOOTPRINT*
SEATING
PLANE
1.20
2X
e
b
e/2
0.05
M
0.47
2X
0.60
PIN 1
C A B
DIMENSIONS: MILLIMETERS
1
2X
L
0.05
M
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present. Some products
may not follow the Generic Marking.
C A B
BOTTOM VIEW
www.onsemi.com
7
ESD7410
PACKAGE DIMENSIONS
X2DFNW2 1.0x0.6, 0.65P
CASE 711BG
ISSUE C
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
www.onsemi.com
8
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
