FCB070N65S3
MOSFET – Power,
N-Channel, SUPERFET) III,
Easy Drive
650 V, 44 A, 70 mW
www.onsemi.com
Description
SUPERFET III MOSFET is ON Semiconductor’s brand−new high
voltage super−junction (SJ) MOSFET family that is utilizing charge
balance technology for outstanding low on−resistance and lower gate
charge performance. This advance technology is tailored to minimize
conduction loss, provide superior switching performance, and
withstand extreme dv/dt rate. Consequently, SUPERFET III MOSFET
is very suitable for various AC/ DC power conversion for system
miniaturization and higher efficiency.
Features
•
•
•
•
•
•
VDSS
RDS(ON) MAX
ID MAX
650 V
70 mW @ 10 V
44 A
D
G
700 V @ TJ = 150°C
RDS(on) = 62 mW (Typ.)
Ultra Low Gate Charge (Typ. Qg = 78 nC)
Low Effective Output Capacitance (Typ. Coss(eff.) = 715 pF)
100% Avalanche Tested
These Devices are Pb−Free and are RoHS Compliant
S
POWER MOSFET
D
G
Applications
S
D2−PAK
CASE 418AJ
• Telecom / Server Power Supplies
• Industrial Power Supplies
• UPS / Solar
MARKING DIAGRAM
$Y&Z&3&K
FCB
070N65S3
$Y
&Z
&3
&K
FCB070N65S3
= ON Semiconductor Logo
= Assembly Plant Code
= Data Code (Year & Week)
= Lot
= Specific Device Code
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
© Semiconductor Components Industries, LLC, 2017
August, 2018 − Rev. 4
1
Publication Order Number:
FCB070N65S3/D
FCB070N65S3
ABSOLUTE MAXIMUM RATINGS (TC = 25°C, Unless otherwise specified)
Symbol
Parameter
VDSS
Drain to Source Voltage
VGSS
Gate to Source Voltage
ID
Drain Current
Value
Unit
650
V
DC
±30
V
AC (f > 1 Hz)
±30
V
Continuous (TC = 25°C)
44
A
Continuous (TC = 100°C)
28
IDM
Drain Current
110
A
EAS
Single Pulsed Avalanche Energy (Note 2)
214
mJ
IAS
Avalanche Current (Note 1)
4.8
A
EAR
Repetitive Avalanche Energy (Note 1)
3.12
mJ
dv/dt
MOSFET dv/dt
100
V/ns
Peak Diode Recovery dv/dt (Note 3)
20
PD
TJ, TSTG
TL
Pulsed (Note 1)
Power Dissipation
(TC = 25°C)
312
W
Derate Above 25°C
2.5
W/°C
−55 to +150
°C
300
°C
Operating and Storage Temperature Range
Maximum Lead Temperature for Soldering, 1/8″ from Case for 5 s
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Repetitive rating: pulse-width limited by maximum junction temperature.
2. IAS = 4.8 A, RG = 25 W, starting TJ = 25°C.
3. ISD ≤ 44 A, di/dt ≤ 200 A/ms, VDD ≤ BVDSS, starting TJ = 25°C.
THERMAL CHARACTERISTICS
Symbol
RqJC
Parameter
Value
Unit
Thermal Resistance, Junction to Case, Max.
0.4
_C/W
Thermal Resistance, Junction to Ambient, Max. (Note 4)
40
4. Device on 1 in2 pad 2 oz copper pad on 1.5 x 1.5 in. board of FR−4 material.
PACKAGE MARKING AND ORDERING INFORMATION
Part Number
Top Marking
Package
Reel Size
Tape Width
Shipping†
FCB070N65S3
FCB070N65S3
D2−PAK
330 mm
24 mm
800 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
2
FCB070N65S3
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Unit
VGS = 0 V, ID = 1 mA, TJ = 25_C
650
−
−
V
VGS = 0 V, ID = 1 mA, TJ = 150_C
700
−
−
V
OFF CHARACTERISTICS
BVDSS
Drain to Source Breakdown Voltage
DBVDSS/DTJ
Breakdown Voltage Temperature
Coefficient
ID = 1 mA, Referenced to 25_C
−
0.72
−
V/_C
IDSS
Zero Gate Voltage Drain Current
VDS = 650 V, VGS = 0 V
−
−
1
mA
VDS = 520 V, VGS = 0 V, TC = 125_C
−
2.2
−
IGSS
Gate to Body Leakage Current
VGS = ±30 V, VDS = 0 V
−
−
±100
nA
2.5
−
4.5
V
ON CHARACTERISTICS
VGS(th)
Gate Threshold Voltage
VGS = VDS, ID = 1.0 mA
RDS(on)
Static Drain to Source On Resistance
VGS = 10 V, ID = 22 A
−
62
70
mW
Forward Transconductance
VDS = 20 V, ID = 22 A
−
29
−
S
VDS = 400 V, VGS = 0 V, f = 1 MHz
−
3090
−
pF
−
68
−
pF
gFS
DYNAMIC CHARACTERISTICS
Ciss
Input Capacitance
Coss
Output Capacitance
Coss(eff.)
Effective Output Capacitance
VDS = 0 V to 400 V, VGS = 0 V
−
715
−
pF
Coss(er.)
Energy Related Output Capacitance
VDS = 0 V to 400 V, VGS = 0 V
−
104
−
pF
Total Gate Charge at 10 V
VDS = 400 V, ID = 22 A, VGS = 10 V
(Note 5)
−
78
−
nC
−
18
−
nC
Qg(tot)
Qgs
Gate to Source Gate Charge
Qgd
Gate to Drain “Miller” Charge
ESR
Equivalent Series Resistance
−
30
−
nC
f = 1 MHz
−
0.6
−
W
VDD = 400 V, ID = 22 A,
VGS = 10 V, Rg = 4.7 W
(Note 5)
−
26
−
ns
−
52
−
ns
SWITCHING CHARACTERISTICS
td(on)
Turn-On Delay Time
tr
Turn-On Rise Time
td(off)
Turn-Off Delay Time
−
89
−
ns
Turn-Off Fall Time
−
16
−
ns
Maximum Continuous Source to Drain Diode Forward Current
−
−
44
A
ISM
Maximum Pulsed Source to Drain Diode Forward Current
−
−
110
A
VSD
Source to Drain Diode Forward Voltage
VGS = 0 V, ISD = 22 A
−
−
1.2
V
trr
Reverse Recovery Time
−
435
−
ns
Qrr
Reverse Recovery Charge
VGS = 0 V, ISD = 22 A,
dIF/dt = 100 A/ms
−
9.2
−
mC
tf
SOURCE-DRAIN DIODE CHARACTERISTICS
IS
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
5. Essentially independent of operating temperature typical characteristics.
www.onsemi.com
3
FCB070N65S3
TYPICAL PERFORMANCE CHARACTERISTICS
VGS = 10.0 V
8.0 V
7.0 V
6.5 V
6.0 V
5.5 V
10
1
0.3
VDS = 20 V
250 ms Pulse Test
100
ID, Drain Current (A)
ID, Drain Current (A)
100
250 ms Pulse Test
TC = 25°C
1
10
VDS, Drain−Source Voltage (V)
150°C
10
25°C
−55°C
1
20
2
Figure 1. On−Region Characteristics
200
TC = 25°C
0.20
0.15
VGS = 10 V
0.10
VGS = 20 V
0.05
0.00
0
30
60
90
ID, Drain Current (A)
150°C
10
25°C
1
−55°C
0.1
0.0
120
VGS, Gate−Source Voltage (V)
10
Ciss
1000
Coss
100
10
1
0.1
0.1
VGS = 0 V
f = 1 MHz
Ciss = Cgs + Cgd (Cds = shorted)
Coss = Cds + Cgd
Crss = Cgd
1
10
100
VDS, Drain−Source Voltage (V)
1.2
1.5
0.3
0.6
0.9
VSD, Body Diode Forward Voltage (V)
Figure 4. Body Diode Forward Voltage
Variation vs. Source Current and
Temperature
100000
Capacitances (pF)
VGS = 0 V
250 ms Pulse Test
100
Figure 3. On−Resistance Variation vs.
Drain Current and Gate Voltage
10000
7
Figure 2. Transfer Characteristics
IS, Reverse Drain Current (A)
RDS(ON), Drain−Source
On−Resistance (W)
0.25
3
4
5
6
VGS, Gate−Source Voltage (V)
Crss
Figure 5. Capacitance Characteristics
VDS = 130 V
8
VDS = 400 V
6
4
2
0
1000
ID = 22 A
0
40
60
80
20
Qg, Total Gate Charge (nC)
100
Figure 6. Gate Charge Characteristics
www.onsemi.com
4
FCB070N65S3
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
3.0
VGS = 0 V
ID = 1 mA
RDS(on), Drain−Source
On−Resistance (Normalized)
BVDSS, Drain−Source
Breakdown Voltage (Normalized)
1.2
1.1
1.0
0.9
0.8
−50
2.5
2.0
1.5
1.0
0.5
0.0
50
100
150
0
TJ, Junction Temperature (5C)
100 ms
1 ms
10
40
ID, Drain Current (A)
ID, Drain Current (A)
30 ms
10 ms
DC
1
Operation in this Area
is Limited by RDS(on)
TC = 25°C
TJ = 150°C
Single Pulse
0.1
1
10
100
VDS, Drain−Source Voltage (V)
20
10
50
75
100
125
TC, Case Temperature (5C)
150
Figure 10. Maximum Drain Current
vs. Case Temperature
20
16
12
8
4
0
30
0
25
1000
Figure 9. Maximum Safe Operating Area
EOSS, (mJ)
0
50
100
150
TJ, Junction Temperature (5C)
50
200
100
0
−50
Figure 8. On−Resistance Variation
vs. Temperature
Figure 7. Breakdown Voltage Variation
vs. Temperature
0.01
VGS = 10 V
ID = 22 A
100 200 300 400 500 600 650
VDS, Drain to Source Voltage (V)
Figure 11. EOSS vs. Drain to Source Voltage
www.onsemi.com
5
FCB070N65S3
r(t), Normalized Effective Transient
Thermal Resistance
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
2
1
0.1
DUTY CYCLE − DESCENDING ORDER
D = 0.5
0.2
0.1
0.05
0.02
0.01
PDM
t1
0.01
0.001
−5
10
SINGLE PULSE
−4
10
t2
ZqJC(t) = r(t) x RqJC
RqJC = 0.4°C/W
Peak TJ = PDM x ZqJC(t) + TC
Duty Cycle, D = t1 / t2
−3
−2
−1
10
10
10
t, Rectangular Pulse Duration (sec)
Figure 12. Transient Thermal Response Curve
www.onsemi.com
6
0
10
1
10
FCB070N65S3
VGS
RL
Qg
VDS
VGS
Qgs
Qgd
DUT
IG = Const.
Charge
Figure 13. Gate Charge Test Circuit & Waveform
RL
VDS
VDS
90%
90%
90%
VDD
VGS
RG
VGS
DUT
VGS
10%
td(on)
10%
tr
td(off)
ton
tf
toff
Figure 14. Resistive Switching Test Circuit & Waveforms
L
E AS + 1 @ LI AS
2
VDS
BVDSS
ID
IAS
RG
VDD
DUT
VGS
2
ID(t)
VDD
VDS(t)
tp
tp
Figure 15. Unclamped Inductive Switching Test Circuit & Waveforms
www.onsemi.com
7
Time
FCB070N65S3
+
DUT
VDS
−
ISD
L
Driver
RG
Same Type
as DUT
VGS
− dv/dt controlled by RG
− ISD controlled by pulse period
D+
VGS
(Driver)
VDD
Gate Pulse Width
Gate Pulse Period
10 V
IFM, Body Diode Forward Current
ISD
(DUT)
di/dt
IRM
Body Diode Reverse Current
Body Diode Recovery dv/dt
VDS
(DUT)
VDD
VSD
Body Diode
Forward Voltage Drop
Figure 16. Peak Diode Recovery dv/dt Test Circuit & Waveforms
SUPERFET is a registered trademark of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or
other countries.
www.onsemi.com
8
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
D2PAK−3 (TO−263, 3−LEAD)
CASE 418AJ
ISSUE E
SCALE 1:1
GENERIC MARKING DIAGRAMS*
XX
XXXXXXXXX
AWLYWWG
IC
DOCUMENT NUMBER:
DESCRIPTION:
XXXXXXXXG
AYWW
Standard
98AON56370E
AYWW
XXXXXXXXG
AKA
Rectifier
XXXXXX
XXYMW
SSG
DATE 25 OCT 2019
XXXXXX = Specific Device Code
A
= Assembly Location
WL
= Wafer Lot
Y
= Year
WW
= Work Week
W
= Week Code (SSG)
M
= Month Code (SSG)
G
= Pb−Free Package
AKA
= Polarity Indicator
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present. Some products
may not follow the Generic Marking.
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
D2PAK−3 (TO−263, 3−LEAD)
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2018
www.onsemi.com
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
www.onsemi.com
1
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative