FIN1017
3.3V LVDS, 1-Bit, High-Speed Differential Driver
Features
Description
This single driver is designed for high-speed
interconnects utilizing Low Voltage Differential Signaling
(LVDS) technology. The driver translates LVTTL signal
levels to LVDS levels with a typical differential output
swing of 350mV, which provides low EMI at ultra-low
power dissipation even at high frequencies. This device
is ideal for high-speed transfer of clock or data.
Greater than 600Mbs Data Rate
3.3V Power Supply Operation
0.5ns Maximum Differential Pulse Skew
1.5ns Maximum Propagation Delay
Low Power Dissipation
The FIN1017 can be paired with its companion receiver,
the FIN1018, or with any other LVDS receiver.
Power-Off Protection
Meets or Exceeds the TIA/EIA-644 LVDS Standard
Flow-Through Pinout Simplifies PCB Layout
8-Lead SOIC and US8 Packages Save Space
Ordering Information
Operating
Part Number Temperature
Range
Eco Status
Package
Packing Method
FIN1017MX
-40 to +85°C
Green
8-Lead Small Outline Integrated Circuit
(SOIC), JEDEC MS-012, 0.150inch Narrow
Tape and Reel
FIN1017K8X
-40 to +85°C
Green
8-Lead US8, JEDEC MO-187, Variation CA
3.1mm Wide
Tape and Reel
For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
© 2001 Fairchild Semiconductor Corporation
FIN1017 • Rev. 1.0.2
www.fairchildsemi.com
FIN1017 — 3.3V LVDS, 1-Bit, High-Speed Differential Driver
April 2009
FIN1017 — 3.3V LVDS, 1-Bit, High-Speed Differential Driver
Pin Configuration
(1)
Figure 1. SOIC
Figure 2. US-8 (Top View)
Note:
1. Ground pins 4 and 5 for optimum performance.
Pin Definitions
Pin# US-8
Pin# SOIC
Name
Description
7
2
DIN
2
7
DOUT+
1
8
DOUT-
8
1
VCC
4, 5
4
GND / GNDS
3, 6
3, 5, 6
NC
LVTTL Data Input
Non-inverting Driver Output
Inverting Driver Output
Power Supply
Ground
No Connect
Function Table
Input
Outputs
DIN
DOUT+
DOUT-
LOW Logic Level
LOW Logic Level
HIGH Logic Level
HIGH Logic Level
HIGH Logic Level
LOW Logic Level
OPEN
LOW Logic Level
HIGH Logic Level
© 2001 Fairchild Semiconductor Corporation
FIN1017 • Rev. 1.0.2
www.fairchildsemi.com
2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
Max.
Unit
VCC
Supply Voltage
-0.5
+4.6
V
DIN
DC Input Voltage
-0.5
+6.0
V
DOUT
DC Output Voltage
-0.5
+4.7
V
IOSD
Driver Short-Circuit Current
TSTG
Storage Temperature Range
Continuous
+150
°C
TJ
Max Junction Temperature
+150
°C
TL
Lead Temperature (Soldering, 10 Seconds)
+260
°C
ESD
-65
A
Human Body Model, JESD22-A114
≥ 6500
Bus Pins DOUT+/DOUT- to GND
≥ 10500
V
≥ 350
Machine Model, JESD22-A115
XXX NOTE to Engineering – ESD values here do NOT match what’s on WWW (pulled from PeopleSoft). XXX
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
VCC
Supply Voltage
VIN
Input Voltage
TA
Operating Temperature
© 2001 Fairchild Semiconductor Corporation
FIN1017 • Rev. 1.0.2
Min.
Max.
Unit
3.0
3.6
V
0
VCC
V
-40
+85
°C
FIN1017 — 3.3V LVDS, 1-Bit, High-Speed Differential Driver
Absolute Maximum Ratings
www.fairchildsemi.com
3
Over-supply voltage and operating temperature ranges, unless otherwise specified. All typical values are at TA =
25°C and with VCC = 3.3V.
Symbol
VOD
ΔVOD
VOS
ΔVOS
IOFF
Parameter
Conditions
Output Differential Voltage
VOD Magnitude Change from
Differential LOW-to-HIGH
Offset Voltage
RL = 100 Ω, See Figure 3
Min.
Typ.
Max.
Units
250
350
450
mV
25
mV
1.375
V
25
mV
1.125
1.250
Offset Magnitude Change from
Differential LOW-to-HIGH
Power-Off Output Current
VCC = 0V, VOUT = 0V or 3.6V
±20
mA
VOUT = 0V
-8
mA
VOD = 0V
±8
IOS
Short-Circuit Output Current
VIH
Input HIGH Voltage
VIL
Input LOW Voltage
0.8
V
IIN
Input Current
VIN = 0V or VCC
±20
mA
Power-Off Input Current
VCC = 0V, VIN = 0V or 3.6V
±20
mA
Input Clamp Voltage
IIK = -18mA
No Load, VIN = 0V or VCC
8
mA
RL = 100Ω, VIN = 0V or VCC
10
mA
II(OFF)
VIK
2
VCC
GND
-1.5
V
V
ICC
Power Supply Current
CIN
Input Capacitance
4
pF
Output Capacitance
6
pF
COUT
FIN1017 — 3.3V LVDS, 1-Bit, High-Speed Differential Driver
DC Electrical Characteristics
AC Electrical Characteristics
Over-supply voltage and operating temperature ranges, unless otherwise specified. All typical values are at TA =
25°C and with VCC = 3.3V. XXX there ARE no Typical values! XXX
Symbol
Parameter
Test Conditions
Min. Max. Units
tPLHD
Differential Propagation Delay, LOW-to-HIGH
0.5
1.5
ns
tPHLD
Differential Propagation Delay, HIGH-to-LOW
0.5
1.5
ns
tTLHD
Differential Output Rise Time (20% to 80%)
0.4
1.0
ns
tTHLD
Differential Output Fall Time (80% to 20%)
tSK(P)
Pulse Skew |tPLH - tPHL|
tSK(PP)
RL = 100Ω, CL = 10pF,
see Figure 4 and Figure 5
(2)
Part-to-Part Skew
0.4
1.0
ns
0.5
ns
1.0
ns
Note:
2. tSK(PP) is the magnitude of the difference in propagation delay times between any specified terminals of two
devices switching in the same direction (either LOW-to-HIGH or HIGH-to-LOW) when both devices operate with
the same supply voltage, same temperature, and have identical test circuits.
© 2001 Fairchild Semiconductor Corporation
FIN1017 • Rev. 1.0.2
www.fairchildsemi.com
4
Figure 3. Differential Driver DC Test Circuit
Figure 4. Differential Driver Propagation Delay and Transition Time Test Circuit
FIN1017 — 3.3V LVDS, 1-Bit, High-Speed Differential Driver
Test Diagrams
Notes:
Note A: All input pulses have frequency = 10MHz, tR or tF = 2ns.
Note B: CL includes all probe and fixture capacitances.
Figure 5. AC Waveforms
© 2001 Fairchild Semiconductor Corporation
FIN1017 • Rev. 1.0.2
www.fairchildsemi.com
5
Figure 6. Output High Voltage vs.
Power Supply Voltage
Figure 7. Output Low Voltage vs.
Power Supply Voltage
Figure 8. Output Short Circuit Current vs.
Power Supply Voltage
Figure 9. Differential Output Voltage vs.
Power Supply Voltage
Figure 10. Differential Output Voltage vs.
Load Resistor
Figure 11. Offset Voltage vs. Power Supply Voltage
© 2001 Fairchild Semiconductor Corporation
FIN1017 • Rev. 1.0.2
FIN1017 — 3.3V LVDS, 1-Bit, High-Speed Differential Driver
Typical Performance Characteristics
www.fairchildsemi.com
6
Figure 12. Power Supply Current vs. Frequency
Figure 13. Power Supply Current vs.
Power Supply Voltage
Figure 14. Power Supply Current vs.
Ambient Temperature
Figure 15. Differential Propagation Delay vs.
Power Supply
Figure 16. Differential Propagation Delay vs.
Ambient Temperature
Figure 17. Differential Pulse Skew (tPLH - tPHL)
vs. Power Supply Voltage
© 2001 Fairchild Semiconductor Corporation
FIN1017 • Rev. 1.0.2
FIN1017 — 3.3V LVDS, 1-Bit, High-Speed Differential Driver
Typical Performance Characteristics
www.fairchildsemi.com
7
Figure 18. Differential Pulse Skew (tPLH - tPHL)
vs. Ambient Temperature
Figure 19. Transition Time vs. Power Supply Voltage
FIN1017 — 3.3V LVDS, 1-Bit, High-Speed Differential Driver
Typical Performance Characteristics
Figure 20. Transition Time vs. Ambient Temperature
© 2001 Fairchild Semiconductor Corporation
FIN1017 • Rev. 1.0.2
www.fairchildsemi.com
8
5.00
4.80
A
0.65
3.81
5
8
B
6.20
5.80
PIN ONE
INDICATOR
1.75
4.00
3.80
1
5.60
4
1.27
(0.33)
0.25
M
1.27
C B A
LAND PATTERN RECOMMENDATION
SEE DETAIL A
0.25
0.10
1.75 MAX
0.25
0.19
C
0.10
0.51
0.33
0.50 x 45°
0.25
R0.10
FIN1017 — 3.3V LVDS, 1-Bit, High-Speed Differential Driver
Physical Dimensions
C
OPTION A - BEVEL EDGE
GAGE PLANE
R0.10
OPTION B - NO BEVEL EDGE
0.36
NOTES: UNLESS OTHERWISE SPECIFIED
8°
0°
0.90
0.406
A) THIS PACKAGE CONFORMS TO JEDEC
MS-012, VARIATION AA, ISSUE C,
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS DO NOT INCLUDE MOLD
FLASH OR BURRS.
D) LANDPATTERN STANDARD: SOIC127P600X175-8M.
E) DRAWING FILENAME: M08AREV13
SEATING PLANE
(1.04)
DETAIL A
SCALE: 2:1
Figure 21. 8-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150inch Narrow
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
© 2001 Fairchild Semiconductor Corporation
FIN1017 • Rev. 1.0.2
www.fairchildsemi.com
9
FIN1017 — 3.3V LVDS, 1-Bit, High-Speed Differential Driver
Physical Dimensions
-A-
1.80
5
0.70
-B-
2.3±0.1
3.1±.1
3.40
8
2.70
0.15
1.00
1.55
0.30 TYP
1
0.2 C B A
ALL LEAD TIPS
4
PIN #1 IDENT.
ALL LEAD TIPS
0.1 C
0.90 MAX
0.5 TYP
DETAIL A
0.70±0.10
0.10-0.18
-C0.10
0.00
0.17-0.27
0.13
0.50TYP
A B
C
0.4 TYP
GAGE PLANE
0.12
0°-8°
A. CONFORMS TO JEDEC REGISTRATION MO-187
B. DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH,
AND TIE BAR EXTRUSIONS.
SEATING PLANE
DETAIL A
D. DIMENSIONS AND TOLERANCES PER ANSI Y14.5M, 1982.
MAB08AREVC
Figure 22. 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
© 2001 Fairchild Semiconductor Corporation
FIN1017 • Rev. 1.0.2
www.fairchildsemi.com
10
FIN1017 — 3.3V LVDS, 1-Bit, High-Speed Differential Driver
© 2001 Fairchild Semiconductor Corporation
FIN1017 • Rev. 1.0.2
www.fairchildsemi.com
11