Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
Revised August 2003
FIN1047
3.3V LVDS 4-Bit Flow-Through
High Speed Differential Driver
General Description
Features
This quad driver is designed for high speed interconnects
utilizing Low Voltage Differential Signaling (LVDS) technology. The driver translates LVTTL signal levels to LVDS levels with a typical differential output swing of 350mV which
provides low EMI at ultra low power dissipation even at
high frequencies. This device is ideal for high speed transfer of clock and data.
■ Greater than 400Mbs data rate
The FIN1047 can be paired with its companion receiver,
the FIN1048, or any other LVDS receiver.
■ Power-Off protection
■ Flow-through pinout simplifies PCB layout
■ 3.3V power supply operation
■ 0.4 ns maximum differential pulse skew
■ 1.7 ns maximum propagation delay
■ Low power dissipation
■ Meets or exceeds the TIA/EIA-644 LVDS standard
■ Pin compatible with equivalent RS-422 and LVPECL
devices
■ 16-Lead SOIC and TSSOP packages save space
Ordering Code:
Order Number
Package Number
FIN1047M
M16A
FIN1047MTC
MTC16
Package Description
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagram
Pin Descriptions
Pin Name
Description
DIN1, DIN2, DIN3, DIN4
LVTTL Data Inputs
DOUT1+, DOUT2+, DOUT3+, DOUT4+ Non-Inverting
Driver Outputs
DOUT1−, DOUT2−, DOUT3−, DOUT4− Inverting
Driver Outputs
EN
Driver Enable Pin
EN
Inverting Driver
Enable Pin
VCC
Power Supply
GND
Ground
Truth Table
Inputs
Outputs
EN
EN
DIN
DOUT+
H
L or OPEN
H
H
L
H
L or OPEN
L
L
H
H
L or OPEN
OPEN
L
H
X
H
X
Z
Z
L or OPEN
X
X
Z
Z
H = HIGH Logic Level
X = Don’t Care
DOUT−
L = LOW Logic Level
Z = High Impedance
© 2003 Fairchild Semiconductor Corporation
DS500589
www.fairchildsemi.com
FIN1047 3.3V LVDS 4-Bit Flow-Through High Speed Differential Driver
June 2001
FIN1047
Absolute Maximum Ratings(Note 1)
Recommended Operating
Conditions
−0.5V to +4.6V
Supply Voltage (VCC)
DC Input Voltage (VIN)
−0.5V to +6V
DC Input Voltage (VOUT)
−0.5V to 4.6V
Driver Short Circuit Current (IOSD)
Storage Temperature Range (TSTG)
Supply Voltage (VCC)
Continuous
150°C
Lead Temperature (TL)
260°C
Note 1: The “Absolute Maximum Ratings”: are those values beyond which
damage to the device may occur. The databook specifications should be
met, without exception, to ensure that the system design is reliable over its
power supply, temperature and output/input loading variables. Fairchild
does not recommend operation of circuits outside databook specification.
(Soldering, 10 seconds)
ESD (Human Body Model)
≥ 9000V
ESD (Machine Model)
≥ 1200V
0 to VCC
−40°C to +85°C
Operating Temperature (TA)
−65°C to +150°C
Max Junction Temperature (TJ)
3.0V to 3.6V
Input Voltage (VIN)
DC Electrical Characteristics
Over supply voltage and operating temperature ranges, unless otherwise specified
Symbol
Parameter
VOD
Output Differential Voltage
∆VOD
VOD Magnitude Change from
Test Conditions
Differential LOW-to-HIGH
RL = 100Ω, Driver Enabled,
VOS
Offset Voltage
See Figure 1
∆VOS
Offset Magnitude Change from
Min
Typ
Max
(Note 2)
250
340
1.125
Differential LOW-to-HIGH
Units
450
mV
1.4
25
mV
1.25
1.375
V
1.2
25
mV
1.4
1.6
VOH
HIGH Output Voltage
VIN = VCC
VOL
LOW Output Voltage
VIN = 0V
0.9
IOFF
Power Off Output Current
VCC = 0V, VOUT = 0V or 3.6V
−20
IOS
Short Circuit Output Current
VOUT = 0V, Driver Enabled
VIH
Input HIGH Voltage
VIL
Input LOW Voltage (Note 3)
IIN
Input Current
VIN = 0V or VCC
−20
20
µA
IOZ
Disabled Output Leakage Current
VOUT = 0V or 4.6V
−20
20
µA
II(OFF)
Power-Off Input Current
VCC = 0V, VIN = 0V or 3.6V
−20
20
µA
VIK
Input Clamp Voltage
IIK = −18 mA
−1.5
ICC
Power Supply Current
No Load, VIN = 0V or VCC, Driver Enabled
Output Power Up/Power Down
High Z Leakage Current
−6
−6
V
GND
0.8
V
−0.7
5
V
8
1.7
4
16
22
−20
Note 3: For transient conditions when t ≤ 5ns and IIN ≤ −100 mA, VILmin = −1.0V.
2
mA
VCC + 1.0
RL = 100 Ω, VIN = 0V or VCC, Driver Enabled
VCC = 0V or 1.5V
µA
2.0
RL = 100 Ω, Driver Disabled
Note 2: All typical values are at TA = 25°C and with VCC = 3.3V.
www.fairchildsemi.com
−3.5
V
V
20
−3
VOD = 0V, Driver Enabled
IPU/PD
1.05
20
mA
µA
Over supply voltage and operating temperature ranges, unless otherwise specified
Symbol
tPLHD
Parameter
Test Conditions
Differential Propagation Delay
LOW-to-HIGH
tPHLD
Differential Propagation Delay
HIGH-to-LOW
Min
Typ
Max
(Note 4)
Units
0.6
1.1
1.7
ns
0.6
1.2
1.7
ns
tTLHD
Differential Output Rise Time (20% to 80%)
RL = 100 Ω, CL = 10 pF,
0.4
1.2
ns
tTHLD
Differential Output Fall Time (80% to 20%)
See Figure 2 (Note 8), and Figure 3
0.4
1.2
ns
0.4
ns
0.3
ns
tSK(P)
Pulse Skew |tPLH - tPHL|
tSK(LH)
Channel-to-Channel Skew
tSK(HL)
(Note 5)
tSK(PP)
Part-to-Part Skew (Note 6)
fMAX
Maximum Frequency (Note 7)
tZHD
Differential Output Enable Time from Z to HIGH
1.7
5.0
ns
tZLD
Differential Output Enable Time from Z to LOW RL = 100Ω, CL = 10 pF,
1.7
5.0
ns
tHZD
Differential Output Disable Time from HIGH to Z See Figure 4 (Note 8), and Figure 5
2.7
5.0
ns
tLZD
Differential Output Disable Time from LOW to Z
2.7
5.0
ns
CIN
Input Capacitance
4.2
pF
COUT
Output Capacitance
5.2
pF
0.05
1.0
RL = 100Ω, See Figure 6 (Note 8)
200
250
ns
MHz
Note 4: All typical values are at TA = 25°C and with VCC = 3.3V.
Note 5: tSK(LH), tSK(HL) is the skew between specified outputs of a single device when the outputs have identical loads and are switching in the same direction.
Note 6: tSK(PP) is the magnitude of the difference in propagation delay times between any specified terminals of two devices switching in the same direction
(either LOW-to-HIGH or HIGH-to-LOW) when both devices operate with the same supply voltage, same temperature, and have identical test circuits.
Note 7: fMAX criteria: Input tR = tF < 1ns, 0V to 3V, 50% Duty Cycle; Output VOD > 250 mv, 45% to 55% Duty Cycle; all switching in phase channels.
Note 8: Test Circuits in Figures 2, 4, 6 are simplified representations of test fixture and DUT loading.
3
www.fairchildsemi.com
FIN1047
AC Electrical Characteristics
FIN1047
Note A: All input pulses have frequency = 10 MHz, tR or tF = 1 ns
Note B: C L includes all fixture and instrumentation capacitance
FIGURE 1. Differential Driver DC Test Circuit
FIGURE 2. Differential Driver Propagation Delay and
Transition Time Test Circuit
Note B: All input pulses have the frequency = 10 MHz, tR or tF = 1 ns
Note A: C L includes all fixture and instrumentation capacitance
FIGURE 3. AC Waveforms
FIGURE 4. Differential Driver Enable and
Disable Test Circuit
FIGURE 5. Enable and Disable AC Waveforms
FIGURE 6. fMAX Test Circuit
www.fairchildsemi.com
4
FIN1047
DC / AC Typical Performance Curves
FIGURE 7. Output High Voltage vs.
Power Supply Voltage
FIGURE 8. Output Low Voltage vs.
Power Supply Voltage
FIGURE 9. Output Short Circuit Current vs.
Power Supply Voltage
FIGURE 10. Differential Output Voltage vs.
Power Supply Voltage
FIGURE 11. Differential Output Voltage vs.
Load Resistor
FIGURE 12. Offset Voltage vs.
Power Supply Voltage
5
www.fairchildsemi.com
FIN1047
DC / AC Typical Performance Curves
(Continued)
FIGURE 13. Power Supply Current vs.
Frequency
FIGURE 14. Power Supply Current vs.
Power Supply Voltage
FIGURE 15. Power Supply Current vs.
Ambient Temperature
FIGURE 16. Differential Propagation Delay vs.
Power Supply Voltage
FIGURE 17. Differential Propagation Delay vs.
Ambient Temperature
FIGURE 18. Differential Pulse Skew (tPLH - tPHL) vs.
Power Supply Voltage
www.fairchildsemi.com
6
FIGURE 19. Differential Pulse Skew (tPLH - tPHL) vs.
Ambient Temperature
FIN1047
DC / AC Typical Performance Curves
(Continued)
FIGURE 20. Transition Time vs.
Power Supply Voltage
FIGURE 21. Transition Time vs.
Ambient Temperature
7
www.fairchildsemi.com
FIN1047
Physical Dimensions inches (millimeters) unless otherwise noted
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Package Number M16A
www.fairchildsemi.com
8
FIN1047 3.3V LVDS 4-Bit Flow-Through High Speed Differential Driver
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC16
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
9
www.fairchildsemi.com
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com