Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FOD3180
2A Output Current, High Speed MOSFET Gate Driver
Optocoupler
Features
Description
■ Guaranteed operating temperature range of -40°C to
The FOD3180 is a 2A Output Current, High Speed
MOSFET Gate Drive Optocoupler. It consists of a
aluminium gallium arsenide (AlGaAs) light emitting diode
optically coupled to a CMOS detector with PMOS and
NMOS output power transistors integrated circuit power
stage. It is ideally suited for high frequency driving of
power MOSFETs used in Plasma Display Panels
(PDPs), motor control inverter applications and high
performance DC/DC converters.
■
■
■
■
■
■
■
■
■
■
■
■
+100°C
2A minimum peak output current
High speed response: 200ns max propagation delay
over temperature range
250kHz maximum switching speed
30ns typ pulse width distortion
Wide VCC operating range: 10V to 20V
5000Vrms, 1 minute isolation
Under voltage lockout protection (UVLO) with
hysteresis
Minimum creepage distance of 7.0mm
Minimum clearance distance of 7.0mm
C-UL, UL and VDE* approved
RDS(ON) of 1.5Ω (typ.) offers lower power dissipation
15kV/µs minimum common mode rejection
The device is packaged in an 8-pin dual in-line housing
compatible with 260°C reflow processes for lead free
solder compliance.
Applications
■
■
■
■
■
Plasma Display Panel
High performance DC/DC convertor
High performance switch mode power supply
High performance uninterruptible power supply
Isolated Power MOSFET gate drive
*Requires ‘V’ ordering option
Functional Block Diagram
Package Outlines
FOD3180
NO CONNECTION 1
8 VCC
8
ANODE 2
7 OUTPUT
CATHODE 3
6 OUTPUT
NO CONNECTION 4
5 VEE
1
8
8
1
Note:
A 0.1µF bypass capacitor must be connected between pins 5 and 8.
©2005 Fairchild Semiconductor Corporation
FOD3180 Rev. 1.0.6
1
www.fairchildsemi.com
FOD3180 — 2A Output Current, High Speed MOSFET Gate Driver Optocoupler
August 2008
Symbol
Parameter
Value
Units
TSTG
Storage Temperature
-40 to +125
°C
TOPR
Operating Temperature
-40 to +100
°C
Junction Temperature
-40 to +125
°C
TJ
260 for 10 sec.
°C
IF(AVG)
Average Input
Current(1)
25
mA
IF(tr, tf)
LED Current Minimum Rate of Rise/Fall
250
ns
IF(TRAN)
Peak Transient Input Current ( 5V
VFHL
Threshold Input Voltage High to Low IO = 0mA, VO < 5V
0.8
Input Forward Voltage
IF = 10mA
1.2
∆VF / TA
Temperature Coefficient of Forward
Voltage
IF = 10mA
-1.5
mV/°C
VUVLO+
UVLO Threshold
VO > 5V, IF = 10mA
8.3
V
VO < 5V, IF = 10mA
7.7
V
0.6
V
VF
VUVLO–
IO = -100mA
Typ.*
VCC – 0.5
UVLOHYST UVLO Hysteresis
BVR
Input Reverse Breakdown Voltage
IR = 10µA
CIN
Input Capacitance
f = 1MHz, VF = 0V
V
VEE + 0.5
V
4.8
6.0
mA
5.0
6.0
mA
8.0
mA
V
1.43
5
1.8
V
V
60
pF
*Typical values at TA = 25°C
©2005 Fairchild Semiconductor Corporation
FOD3180 Rev. 1.0.6
www.fairchildsemi.com
3
FOD3180 — 2A Output Current, High Speed MOSFET Gate Driver Optocoupler
Electrical-Optical Characteristics (DC)
Over recommended operating conditions unless otherwise specified.
Symbol
Parameter
Test Conditions Min.
tPLH
Propagation Delay Time to High Output Level(8)
tPHL
Propagation Delay Time to Low Output Level(8)
IF = 10mA,
Rg = 10Ω,
f = 250kHz,
Duty Cycle = 50%,
Cg = 10nF
PWD
Pulse Width
Distortion(9)
Propagation Delay Difference Between Any
PDD
(tPHL – tPLH) Two Parts(10)
tr
Rise Time
tf
Fall Time
tUVLO ON
UVLO Turn On Delay
tUVLO OFF
UVLO Turn Off Delay
Typ.* Max.
Unit
50
135
200
ns
50
105
200
ns
65
ns
90
ns
-90
CL = 10nF,
Rg = 10Ω
75
ns
55
ns
2.0
µs
0.3
µs
| CMH |
Output High Level Common Mode Transient
Immunity(11) (12)
TA = +25°C,
If = 10 to 16mA,
VCM = 1.5kV,
VCC = 20V
15
kV/µs
| CML |
Output Low Level Common Mode Transient
Immunity(11) (13)
TA = +25°C,
Vf = 0V,
VCM = 1.5kV,
VCC = 20V
15
kV/µs
*Typical values at TA = 25°C
Isolation Characteristics
Symbol Parameter
Test Conditions
VISO
Withstand Isolation Voltage(14) (15) TA = 25°C,
R.H. < 50%, t = 1min.,
II-O ≤ 20µA
RI-O
Resistance (input to output)(15)
VI-O = 500V
CI-O
Capacitance (input to output)
Freq. = 1MHz
Min.
Typ.*
5000
Max.
Unit
Vrms
1011
Ω
1
pF
*Typical values at TA = 25°C
©2005 Fairchild Semiconductor Corporation
FOD3180 Rev. 1.0.6
www.fairchildsemi.com
4
FOD3180 — 2A Output Current, High Speed MOSFET Gate Driver Optocoupler
Switching Characteristics
7.
8.
Maximum pulse width = 1ms, maximum duty cycle = 20%.
tPHL propagation delay is measured from the 50% level on the falling edge of the input pulse to the 50% level of the
falling edge of the VO signal. tPLH propagation delay is measured from the 50% level on the rising edge of the input
pulse to the 50% level of the rising edge of the VO signal.
9.
PWD is defined as | tPHL – tPLH | for any given device.
10. The difference between tPHL and tPLH between any two FOD3180 parts under same test conditions.
11. Pin 1 and 4 need to be connected to LED common.
12. Common mode transient immunity in the high state is the maximum tolerable dVCM/dt of the common mode pulse
VCM to assure that the output will remain in the high state (i.e. VO > 10.0V).
13. Common mode transient immunity in a low state is the maximum tolerable dVCM/dt of the common mode pulse,
VCM, to assure that the output will remain in a low state (i.e. VO < 1.0V).
14. In accordance with UL 1577, each optocoupler is proof tested by applying an insulation test voltage > 6000Vrms,
60Hz for 1 second (leakage detection current limit II-O < 5µA).
15. Device considered a two-terminal device: pins on input side shorted together and pins on output side shorted
together.
©2005 Fairchild Semiconductor Corporation
FOD3180 Rev. 1.0.6
www.fairchildsemi.com
5
FOD3180 — 2A Output Current, High Speed MOSFET Gate Driver Optocoupler
Notes:
1. Derate linearly above +70°C free air temperature at a rate of 0.3mA/°C.
2. The output currents IOH and IOL are specified with a capacitive current limited load = (3 x 0.01µF) + 0.5Ω,
frequency = 8kHz, 50% DF.
3. The output currents IOH and IOL are specified with a capacitive current limited load = (3 x 0.01µF) + 8.5Ω,
frequency = 8kHz, 50% DF.
4. Derate linearly above +87°C, free air temperature at the rate of 0.77mW/°C. Refer to Figure 12.
5. No derating required across operating temperature range.
6. In this test, VOH is measured with a dc load current of 100mA. When driving capacitive load VOH will approach VCC
as IOH approaches zero amps.
Fig. 2 Low To High Input Current Threshold
vs. Ambient Temperature
Fig. 1 Input Forward Current vs. Forward Voltage
6
IFLH – LOW TO HIGH INPUT CURRENT
THRESHOLD (mA)
I F – FORWARD CURRENT (mA)
100
10
TA = -40°C
TA = 100°C
1
TA = 25°C
0.1
0.01
V = 10 to 20V
CC
VEE = 0
Output = Open
5
4
3
2
1
0
0.001
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
-40
2.2
-20
Fig. 3 Output Low Voltage vs. Ambient Temperature
(VOH - VCC) – HIGH OUTPUT VOLTAGE DROP (V)
V OL – OUTPUT LOW VOLTAGE (V)
VF(OFF) = -3.0V to 0.8V
IOUT = 100mA
V = 10V to 20V
CC
VEE = 0
0.20
0.15
0.10
0.05
0.00
-40
-20
0
20
40
60
40
60
80
100
80
0.00
V
CC
= 10 to 20V, VEE = 0
IF = 10mA to 16mA
IOUT = -100 mA
-0.05
-0.10
-0.15
-0.20
-0.25
-0.30
100
-40
-20
TA – AMBIENT TEMPERATURE (°C)
0
20
40
60
80
100
TA – AMBIENT TEMPERATURE (°C)
Fig. 5 Supply Current vs. Ambient Temperature
Fig. 6 Supply Current vs. Supply Voltage
6.2
6.2
V
CC
= 20V, VEE = 0
IF = 10mA (for ICCH)
IF = 0mA (for ICCL)
IF = 10mA (for ICCH)
IF = 0mA (for ICCL)
5.8
I CC – SUPPLY CURRENT (mA)
5.8
I CC – SUPPLY CURRENT (mA)
20
Fig. 4 High Output Voltage Drop vs. Ambient Temperature
0.30
0.25
0
TA – AMBIENT TEMPERATURE (°C)
VF – FORWARD VOLTAGE (V)
5.4
ICCL
5.0
ICCH
4.6
4.2
3.8
TA = 25oC, VEE = 0V
5.4
5.0
ICCL
ICCH
4.6
4.2
3.8
-40
-20
0
20
40
60
80
100
10
TA – AMBIENT TEMPERATURE (°C)
©2005 Fairchild Semiconductor Corporation
FOD3180 Rev. 1.0.6
12
14
16
18
20
VCC – SUPPLY VOLTAGE (V)
www.fairchildsemi.com
6
FOD3180 — 2A Output Current, High Speed MOSFET Gate Driver Optocoupler
Typical Performance Curves
Fig. 8 Propagation Delay vs. Forward LED Current
Fig. 7 Propagation Delay vs. Load Capacitance
200
200
VCC = 20V, VEE = 0
RG = 10Ω, CG = 10nF
f = 250 kHz, D. Cycle = 50%
TA = 25oC
VCC = 20V, VEE = 0
IF = 10mA, TA = 25oC
RG = 10Ω, CG = 10nF
f = 250 kHz, D. Cycle = 50%
t P – PROPAGATION DELAY (ns)
t P – PROPAGATION DELAY (ns)
180
160
tPHL
140
120
tPLH
100
80
180
160
tPHL
140
120
tPLH
100
80
60
60
5
10
15
20
25
6
8
CG – LOAD CAPACITANCE (nF)
12
14
16
Fig. 10 Propagation Delay vs. Ambient Temperature
Fig. 9 Propagation Delay vs. Series Load Resistance
200
200
VCC = 20V, VEE = 0
VCC = 20V, VEE = 0
IF = 10mA, TA = 25oC
CG = 10nF
f = 250 kHz, D. Cycle = 50%
180
t P – PROPAGATION DELAY (ns)
t P – PROPAGATION DELAY (ns)
10
IF – FORWARD LED CURRENT (mA)
160
140
tPHL
120
tPLH
100
80
IF = 10mA
RG = 10Ω, CG = 10nF
f = 250kHz, D. Cycle = 50%
180
160
140
tPHL
120
tPLH
100
80
60
60
10
20
30
40
50
-40
RG – SERIES LOAD RESISTANCE (Ω)
-20
0
20
40
60
80
100
TA – AMBIENT TEMPERATURE (°C)
Fig. 11 Propagation Delay vs. Supply Voltage
180
t P – PROPAGATION DELAY (ns)
IF = 10mA, TA = 25oC
RG = 10Ω, CG = 10nF
f = 250 kHz, D. Cycle = 50%
160
140
tPHL
120
tPLH
100
80
60
10
15
20
25
VCC – SUPPLY VOLTAGE (V)
©2005 Fairchild Semiconductor Corporation
FOD3180 Rev. 1.0.6
www.fairchildsemi.com
7
FOD3180 — 2A Output Current, High Speed MOSFET Gate Driver Optocoupler
Typical Performance Curves (Continued)
Option
Order Entry Identifier
(Example)
No option
FOD3180
S
FOD3180S
SD
FOD3180SD
T
FOD3180T
0.4" Lead Spacing
V
FOD3180V
VDE 0884
TV
FOD3180TV
VDE 0884, 0.4" Lead Spacing
SV
FOD3180SV
VDE 0884, Surface Mount
SDV
FOD3180SDV
Description
Standard Through Hole Device
Surface Mount, Lead Bend
Surface Mount, Tape and Reel
VDE 0884, Surface Mount, Tape and Reel
Marking Information
1
3180
XX YY B
V
3
2
6
5
4
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4
Two digit year code, e.g., ‘03’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
©2005 Fairchild Semiconductor Corporation
FOD3180 Rev. 1.0.6
8
www.fairchildsemi.com
FOD3180 — 2A Output Current, High Speed MOSFET Gate Driver Optocoupler
Ordering Information
D0
P0
t
K0
P2
E
F
A0
W1
d
t
P
User Direction of Feed
Symbol
W
W
B0
Description
D1
Dimension in mm
Tape Width
16.0 ± 0.3
Tape Thickness
0.30 ± 0.05
P0
Sprocket Hole Pitch
4.0 ± 0.1
D0
Sprocket Hole Diameter
1.55 ± 0.05
E
Sprocket Hole Location
1.75 ± 0.10
F
Pocket Location
7.5 ± 0.1
4.0 ± 0.1
P2
P
Pocket Pitch
A0
Pocket Dimensions
12.0 ± 0.1
10.30 ±0.20
B0
10.30 ±0.20
K0
4.90 ±0.20
W1
d
R
©2005 Fairchild Semiconductor Corporation
FOD3180 Rev. 1.0.6
Cover Tape Width
1.6 ± 0.1
Cover Tape Thickness
0.1 max
Max. Component Rotation or Tilt
10°
Min. Bending Radius
30
9
www.fairchildsemi.com
FOD3180 — 2A Output Current, High Speed MOSFET Gate Driver Optocoupler
Carrier Tape Specifications
245 C, 10–30 s
Temperature (°C)
300
260 C peak
250
200
150
Time above 183C,