Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FOD420, FOD4208, FOD4216, FOD4218
6-Pin DIP High dv/dt Random Phase Triac Drivers
Features
Description
• 300 mA On-State Current
• High Blocking Voltage
– 600 V (FOD420, FOD4216)
– 800 V (FOD4208, FOD4218)
• High Trigger Sensitivity
– 1.3 mA (FOD4216, FOD4218)
– 2 mA (FOD420, FOD4208)
• High Static dv/dt (10,000 V/μs)
• Safety and Regulatory Approvals:
– UL1577, 5,000 VACRMS for 1 Minute
– DIN-EN/IEC60747-5-5
The FOD420, FOD4208, FOD4216 and FOD4218
devices consist of an infrared emitting diode coupled to a
hybrid random phase triac formed with two inverse parallel SCRs which form the triac function capable of driving
discrete triacs. The FOD4216 and FOD4218 utilize a
high efficiency infrared emitting diode which offers an
improved trigger sensitivity. These devices are housed in
a standard 6-pin dual in-line (DIP) package.
Applications
•
•
•
•
•
Solid-State Relays
Industrial Controls
Lighting Controls
Static Power Switches
AC Motor Starters
Functional Schematic
ANODE 1
Package Outlines
6 MAIN TERM.
6
6
1
CATHODE 2
1
5 NC*
N/C 3
4 MAIN TERM.
6
1
Figure 2. Package Outlines
*DO NOT CONNECT
(TRIAC SUBSTRATE)
Figure 1. Schematic
©2004 Fairchild Semiconductor Corporation
FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6
www.fairchildsemi.com
FOD420, FOD4208, FOD4216, FOD4218 — 6-Pin DIP High dv/dt Random Phase Triac Drivers
October 2016
As per DIN EN/IEC 60747-5-5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit
data. Compliance with the safety ratings shall be ensured by means of protective circuits.
Parameter
Characteristics
< 150 VRMS
Installation Classifications per DIN VDE
0110/1.89 Table 1, For Rated Mains Voltage
I–IV
I–IV
< 300 VRMS
Climatic Classification
55/100/21
Pollution Degree (DIN VDE 0110/1.89)
2
Comparative Tracking Index
Symbol
VPR
175
Parameter
Value
Unit
Input-to-Output Test Voltage, Method A, VIORM x 1.6 = VPR,
Type and Sample Test with tm = 10 s, Partial Discharge < 5 pC
1360
Vpeak
Input-to-Output Test Voltage, Method B, VIORM x 1.875 = VPR,
100% Production Test with tm = 1 s, Partial Discharge < 5 pC
1594
Vpeak
VIORM
Maximum Working Insulation Voltage
850
Vpeak
VIOTM
Highest Allowable Over-Voltage
6000
Vpeak
External Creepage
7
mm
External Clearance
7
mm
DTI
Distance Through Insulation (Insulation Thickness)
0.4
mm
TS
Case Temperature(1)
175
°C
IS,INPUT
PS,OUTPUT
RIO
Input Current
(1)
Output Power(1)
Insulation Resistance at TS, VIO = 500 V(1)
400
mA
700
mW
> 109
Note:
1. Safety limit values – maximum values allowed in the event of a failure.
©2004 Fairchild Semiconductor Corporation
FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6
www.fairchildsemi.com
2
FOD420, FOD4208, FOD4216, FOD4218 — 6-Pin DIP High dv/dt Random Phase Triac Drivers
Safety and Insulation Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. TA = 25°C unless otherwise specified.
Symbol
Device
Parameter
Value
Unit
TSTG
Storage Temperature
All
-55 to +150
°C
TOPR
Operating Temperature
All
-55 to +100
°C
Junction Temperature
All
-55 to +125
°C
Lead Solder Temperature
All
260 for 10 sec
°C
Total Device Power Dissipation @ 25°C
All
500
mW
Derate Above 25°C
All
6.6
mW/°C
IF
Continuous Forward Current
All
30
mA
VR
Reverse Voltage
All
6
V
Total Power Dissipation 25°C Ambient
All
50
mW
Derate Above 25°C
All
0.71
mW/°C
FOD420, FOD4216
600
FOD4208, FOD4218
800
TJ
TSOL
PD(TOTAL)
EMITTER
PD(EMITTER)
DETECTOR
VDRM
Off-State Output Terminal Voltage
ITSM
Peak Non-Repetitive Surge Current
(single cycle 60 Hz sine wave)
All
3
A
ITM
Peak On-State Current
All
300
mA
Total Power Dissipation @ 25°C Ambient
All
450
mW
Derate Above 25°C
All
5.9
mW/°C
PD(DETECTOR)
©2004 Fairchild Semiconductor Corporation
FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6
V
www.fairchildsemi.com
3
FOD420, FOD4208, FOD4216, FOD4218 — 6-Pin DIP High dv/dt Random Phase Triac Drivers
Absolute Maximum Ratings
TA = 25°C unless otherwise specified.
Individual Component Characteristics
Symbol Parameter
Test Conditions
Device
Min.
Typ.
Max.
Unit
EMITTER
VF
Input Forward Voltage
IF = 20 mA
All
1.28
1.50
V
IR
Reverse Leakage Current
VR = 6 V
All
0.01
10
μA
3
100
μA
3
100
μA
DETECTOR
ID(RMS)
IR(RMS)
dv/dt
Peak Blocking Current,
Either Direction
Reverse Current
Critical Rate of Rise of
Off-State Voltage
IF = 0,
TA = 100°C(2)
VD = 600 V
FOD420,
FOD4216
VD = 800 V
FOD4208,
FOD4218
VD = 600 V
FOD420,
FOD4216
VD = 800 V
FOD4208,
FOD4218
VD = VDRM
All
TA = 100°C
IF = 0 A(3)
(Figure 14)
10,000
V/μs
Notes:
2. Test voltage must be applied within dv/dt rating.
3. This is static dv/dt. See Figure 14 for test circuit. Commutating dv/dt is a function of the load-driving thyristor(s) only.
©2004 Fairchild Semiconductor Corporation
FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6
www.fairchildsemi.com
4
FOD420, FOD4208, FOD4216, FOD4218 — 6-Pin DIP High dv/dt Random Phase Triac Drivers
Electrical Characteristics
TA = 25°C unless otherwise specified.
Transfer Characteristics
Symbol
IFT
Parameter
LED Trigger Current
Test Conditions
Main Terminal Voltage = 5
V(4)
Device
Min.
Typ.
Max.
FOD420,
FOD4208
0.75
2.0
FOD4216,
FOD4218
0.75
1.3
Unit
mA
VTM
Peak On-State Voltage,
Either Direction
ITM = 300 mA peak, IF = Rated IFT
All
2.2
3
V
IH
Holding Current, Either
Direction
VT = 3 V
All
200
500
µA
IL
Latching Current
VT = 2.2 V
All
5
mA
VRM = VDM = 424 VAC
FOD420,
FOD4216,
FOD4218
60
µs
VRM = VDM = 565 VAC
FOD4208
VRM = VDM = 424 VAC
FOD420,
FOD4216,
FOD4218
52
µs
VRM = VDM = 565 VAC
FOD4208
tON
Turn-On Time
PF = 1.0,
IT = 300 mA
tOFF
Turn-Off Time
dv/dtC
Critical Rate of Rise of
Voltage at Current Commutation
VD = 230 VRMS,
ID = 300 mAPK
All
10
V/µs
di/dtC
Critical Rate of Rise of
V = 230 VRMS,
On-State Current Commu- D
ID = 300 mAPK
tation
All
9
A/ms
Critical Rate of
Rise of Coupled
Input/Output Voltage
All
dv(IO)/dt
IT = 0 A, VRM = VDM = 424 VAC
10,000
V/µs
Note:
4. All devices are guaranteed to trigger at an IF value less than or equal to max IFT.Therefore, recommended operating
IF lies between max IFT (2 mA for FOD420 and FOD4208 and 1.3 mA for FOD4216 and FOD4218) and the absolute
max IF (30 mA).
Isolation Characteristics
Symbol Parameter
VISO
Steady State Isolation
Voltage
Test Conditions
Device
f = 60 Hz, t = 1 Minute(5)
All
Min.
5,000
Typ.
Max.
Unit
VACRMS
Note:
5. Isolation voltage, VISO, is an internal device dielectric breakdown rating. For this test, pins 1, 2 and 3 are common,
and pins 4, 5 and 6 are common. 5,000 VACRMS for 1 minute duration is equivalent to 6,000 VACRMS for 1 second
duration.
©2004 Fairchild Semiconductor Corporation
FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6
www.fairchildsemi.com
5
FOD420, FOD4208, FOD4216, FOD4218 — 6-Pin DIP High dv/dt Random Phase Triac Drivers
Electrical Characteristics (Continued)
)LJXUHVKRZVDW\SLFDOFLUFXLWIRUZKHQKRWOLQHVZLWFKLQJLVUHTXLUHG,QWKLVFLUFXLWWKH³KRW´VLGHRIWKHOLQHLV
VZLWFKHGDQGWKHORDGFRQQHFWHGWRWKHFROGRUQHXWUDOVLGH7KHORDGPD\EHFRQQHFWHGWRHLWKHUWKHQHXWUDORUKRW
OLQH
5LQ LV FDOFXODWHG VR WKDW ,) LV HTXDO WR WKH UDWHG ,)7 RI WKH SDUW P$ IRU )2' DQG )2' P$ IRU
)2'DQG)2'7KHȍUHVLVWRUDQG)FDSDFLWRUDUHIRUVQXEELQJRIWKHWULDFDQGPD\RUPD\
QRWEHQHFHVVDU\GHSHQGLQJXSRQWKHSDUWLFXODUWULDFDQGORDGXVH
Rin
1
6
360 7
HOT
VCC
FOD40
FOD408
FOD416
FOD418
2
3
5
FKPF12N80
397
4
240 VAC
0.01MF
330 7
LOAD
NEUTRAL
* For highly inductive loads (power factor < 0.5), change this value to 360 ohms.
)LJXUH+RW/LQH6ZLWFKLQJ$SSOLFDWLRQ&LUFXLW
240 VAC
R1
1
VCC
Rin
2
D1
6
FOD40
FOD408
FOD416
FOD418
3
SCR
5
SCR
4
360 7
R2
D2
LOAD
Figure . Inverse-Parallel SCR Driver Circuit
6XJJHVWHGPHWKRGRIILULQJWZREDFNWREDFN6&5¶VZLWKD)DLUFKLOGWULDFGULYHU'LRGHVFDQEH1UHVLVWRUV
5DQG5DUHRSWLRQDO7
1RWH7KLVRSWRLVRODWRUVKRXOGQRWEHXVHGWRGULYHDORDGGLUHFWO\,WLVLQWHQGHGWREHDGLVFUHWHWULDFGULYHUGHYLFH
RQO\
©2004 Fairchild Semiconductor Corporation
FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6
www.fairchildsemi.com
6
FOD420, FOD4208, FOD4216, FOD4218 — 6-Pin DIP High dv/dt Random Phase Triac Drivers
Typical Application
1.6
1.4
-55°C
1.2
25°C
85°C
1.0
0.8
0.6
0.1
1.6
IFT – NORMALIZED LED TRIGGER CURRENT
VF – FORWARD VOLTAGE (V)
1.8
1
10
IF – FORWARD CURRENT (mA)
VAK = 5.0 V
Normalized to TA = 25°C
1.4
1.2
1.0
0.8
0.6
-60
100
Figure . Forward Voltage
(VF) vs. Forward Current (IF)
-20
0
20
40
60
TA – AMBIENT TEMPERATURE (°C)
100
100
tD = t(IF/IFT 25°C)
τ
VD = 400 VP-P
F = 60 Hz
0.005
0.01
1000
0.02
DF =
0.05
tD – DELAY TIME (μs)
Duty Factor
t
τ
t
0.1
0.2
0.5
100
10
10-6
10-5
10-4
10-3
10-2
10-1
t – LED PULSE DURATION (s)
100
10
1
101
1
10
IFT/IF – NORMALIZED IF (mA)
100
Figure . Trigger Delay Time
Figure . Peak LED Current
vs. Duty Factor, Tau
1000
1.7
VL = 250 VP-P
F = 60 Hz
Normalized to DC
1.6
ITM – ON-STATE CURRENT (mA)
IFTH(PW)/IFTH(DC) – NORMALIZED IFTH
80
Figure . Normalized LED Trigger Current
(IFT) vs. Ambient Temperature (TA)
10000
If(pk) – PEAK LED CURRENT (mA)
-40
1.5
1.4
1.3
1.2
1.1
100
TA = 100°C
10
TA = 25°C
1.0
0.9
0
200
400
600
PW – PULSE WIDTH (μs)
800
1
1000
1
2
3
4
VTM – ON-STATE VOLTAGE (V)
Figure . On-State Voltage
(VTM) vs. On-State Current (ITM)
Figure . Pulse Trigger Current
©2004 Fairchild Semiconductor Corporation
FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6
0
www.fairchildsemi.com
7
FOD420, FOD4208, FOD4216, FOD4218 — 6-Pin DIP High dv/dt Random Phase Triac Drivers
Typical Performance Characteristics
IDRM – NORMALIZED OFF-STATE CURRENT
IH – NORMALIZED HOLDING CURRENT
2.2
Normalized to TA = 25°C
2.0
1.8
1.6
1.4
1.2
1.0
0.8
-60
-40
-20
0
20
40
60
80
100
10
VD = 800 V, IBD (μA)
Normalized to TA = 25°C
1
0.1
-60
-40
TA – AMBIENT TEMPERATURE (°C)
0
20
40
60
80
100
Figure 1. Normalized Off-State Current (IDRM)
vs. Ambient Temperature (TA)
Figure 1. Normalized Holding Current
(IH) vs. Ambient Temperature (TA)
350
ITP – PEAK ON-STATE CURRENT (mA)
-20
TA – AMBIENT TEMPERATURE (°C)
ITP = f(TA)
300
250
200
150
100
50
-60
-40
-20
0
20
40
60
80
100
TA – AMBIENT TEMPERATURE (°C)
Figure 1. Current Reduction
©2004 Fairchild Semiconductor Corporation
FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6
www.fairchildsemi.com
8
FOD420, FOD4208, FOD4216, FOD4218 — 6-Pin DIP High dv/dt Random Phase Triac Drivers
Typical Performance Characteristics (Continued)
DIFFERENTIAL
PREAMP
27ȍ
1000ȍ
2W
10 W
WIREWOUND
6
X100 PROBE
1
DUT
2
X100 PROBE
20kȍ
2W
0.33X)
0.047Q)
1000 V
1000 V
4
470 pF
dY
dt
VERNIER
MOUNT DUT ON
TEMPERATURE CONTROLLED
Cu PLATE
1 0ȍ2W EACH
100ȍ
2W
0.001Q)
0.005Q)
82ȍ
2W
1.2 0ȍ
0.01Q)
2W
POWER
0.047Q)
1N914
20 V
0.1Q)
RFP4N100
0.47Q)
56ȍ
2W
f = 10 Hz
PW = 100 μs
50 PULSE
GENERATOR
TEST
1Nȍ
1/4 W
0-1000 V
10 mA
1N967A
18 V
ALL COMPONENTS ARE NON-INDUCTIVE UNLESS SHOWN
GY
)LJXUH&LUFXLWIRU6WDWLF0HDVXUHPHQWRI3RZHU7K\ULVWRUV
GW
©2004 Fairchild Semiconductor Corporation
FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6
www.fairchildsemi.com
9
FOD420, FOD4208, FOD4216, FOD4218 — 6-Pin DIP High dv/dt Random Phase Triac Drivers
VDRM/VRRM SELECT
FOD420, FOD4208, FOD4216, FOD4218 — 6-Pin DIP High dv/dt Random Phase Triac Drivers
Reflow Profile
245 °C, 10 to 30 seconds
Temperature (°C)
300
260°C peak
250
200
150
Time above 183°C, < 160 seconds
100
50
Ramp up = 2 to 10°C/second
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
Time (Minute)
• Peak reflow temperature: 26°C (package surface temperature)
• Time of temperature higher than 18°C for 160 seconds or less
• One time soldering reflow is recommendeG
Figure 1. Reflow Profile
©2004 Fairchild Semiconductor Corporation
FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6
www.fairchildsemi.com
10
Part Number
FOD420
Package
Packing Method
DIP 6-Pin
Tube (50 Units)
FOD420S
SMT 6-Pin (Lead Bend)
Tube (50 Units)
FOD420SD
SMT 6-Pin (Lead Bend)
Tape and Reel (1000 Units)
DIP 6-Pin, DIN EN/IEC60747-5-5 Option
Tube (50 Units)
FOD420SV
SMT 6-Pin (Lead Bend), DIN EN/IEC60747-5-5 Option
Tube (50 Units)
FOD420SDV
SMT 6-Pin (Lead Bend), DIN EN/IEC60747-5-5 Option
Tape and Reel (1000 Units)
DIP 6-Pin, 0.4” Lead Spacing, DIN EN/IEC60747-5-5 Option
Tube (50 Units)
FOD420V
FOD420TV
Note:
6. The product orderable part number system listed in this table also applies to the FOD4208, FOD4216, and
FOD4218product families.
Marking Information
1
V
3
)2'
2
;