FOD8480, FOD8482
Optically Isolated
Intelligent Power Module
(IPM) Driver in Stretched
Body SOP 6-Pin
www.onsemi.com
Description
The FOD8480 and FOD8482 are low power optocouplers, which
support isolated interface to Intelligent Power Module (IPM)
communicating digital control signals from the controller to the IPM,
without conducting ground loops or hazardous voltages.
The FOD848x Series, packaged in a stretched body 6−pin small
outline plastic package, consists of an aluminum gallium arsenide
(AlGaAs) light emitting diode and an integrated high gain photo
detector. The detector has a detector threshold with hysteresis. The
hysteresis provides differential mode noise immunity and eliminates
the potential for output signal chatter. Its non−inverting output is
designed as totem pole, which does not require any pull−up resistor.
The FOD8482 has a lower threshold input current, IFLH, at 3.0 mA
maximum. For the complete FOD848x Series, the Electrical and
Switching Characteristics are guaranteed over the extended industrial
temperature range of −40°C to 100°C and a VDD range of 4.5 V to
30 V. Low IF and wide VDD range allow compatibility with TTL,
LSTTL, and CMOS logic and result in lower power consumption
compared to other high speed optocouplers.
Features
• Maximum Threshold Input Current, IFLH,
FOD8480 – 5.5 mA
FOD8482 – 3.0 mA
FOD8480T and FOD8482T − 8 mm Creepage and Clearance
Distance, and 0.4 mm Insulation Distance to Achieve Reliable and
High Voltage Insulation
High Noise Immunity Characterized by Common Mode Transient
Immunity (CMTI)
20 kV/ms Minimum CMTI
Wide Operating Voltage Range, 4.5 V to 30 V
Specifications Guaranteed Over Extended Industrial Temperature
Range, −40 to 100°C
Safety and Regulatory Approvals
♦ UL1577, 5,000 VACRMS for 1 Min.
♦ DIN−EN/IEC60747−5−5, 1,140 V Peak Working Insulation
Voltage
SOIC6
SUFFIX
CASE 751EL
SOIC6 W
SUFFIX
CASE 751EM
MARKING DIAGRAM
8480
VYYWWP
8480 or 8482 = Specific Device Number
V
= DIN EN/IEC60747−5−5 Option
YY
= Two Digit Year Code
WW
= Two Digit Work Week
P
= Assembly Package Code
♦
•
•
•
•
•
•
♦
PIN CONNECTIONS
TRUTH TABLE
LED
Vo
Off
Low
On
High
Typical Applications
• Isolating Intelligent Power Module
• Isolating Industrial Communication Interface
© Semiconductor Components Industries, LLC, 2019
August, 2019 − Rev. 1
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the
package dimensions section on page 10 of this data sheet.
1
Publication Order Number:
FOD8480/D
FOD8480, FOD8482
Table 1. SAFETY AND INSULATION RATINGS for Stretched Body SOP 6−Pin
As per DIN_EN/IEC60747−5−5. This optocoupler is suitable for “safe electrical insulation” only within the safety limit data. Compliance
with the safety ratings shall be ensured by means of protective circuits.
FOD8480
FOD8482
FOD8480T
FOD8482T
Installation Classifications per DIN VDE 0110/1.89 Table 1, for rated
main voltage
很抱歉,暂时无法提供与“FOD8480T”相匹配的价格&库存,您可以联系我们找货
免费人工找货