FOD8482

FOD8480, FOD8482 Optically Isolated Intelligent Power Module (IPM) Driver in Stretched Body SOP 6-Pin www.onsemi.com Description The FOD8480 and FOD8482 are low power optocouplers, which support isolated interface to Intelligent Power Module (IPM) communicating digital control signals from the controller to the IPM, without conducting ground loops or hazardous voltages. The FOD848x Series, packaged in a stretched body 6−pin small outline plastic package, consists of an aluminum gallium arsenide (AlGaAs) light emitting diode and an integrated high gain photo detector. The detector has a detector threshold with hysteresis. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter. Its non−inverting output is designed as totem pole, which does not require any pull−up resistor. The FOD8482 has a lower threshold input current, IFLH, at 3.0 mA maximum. For the complete FOD848x Series, the Electrical and Switching Characteristics are guaranteed over the extended industrial temperature range of −40°C to 100°C and a VDD range of 4.5 V to 30 V. Low IF and wide VDD range allow compatibility with TTL, LSTTL, and CMOS logic and result in lower power consumption compared to other high speed optocouplers. Features • Maximum Threshold Input Current, IFLH, FOD8480 – 5.5 mA FOD8482 – 3.0 mA FOD8480T and FOD8482T − 8 mm Creepage and Clearance Distance, and 0.4 mm Insulation Distance to Achieve Reliable and High Voltage Insulation High Noise Immunity Characterized by Common Mode Transient Immunity (CMTI) 20 kV/ms Minimum CMTI Wide Operating Voltage Range, 4.5 V to 30 V Specifications Guaranteed Over Extended Industrial Temperature Range, −40 to 100°C Safety and Regulatory Approvals ♦ UL1577, 5,000 VACRMS for 1 Min. ♦ DIN−EN/IEC60747−5−5, 1,140 V Peak Working Insulation Voltage SOIC6 SUFFIX CASE 751EL SOIC6 W SUFFIX CASE 751EM MARKING DIAGRAM 8480 VYYWWP 8480 or 8482 = Specific Device Number V = DIN EN/IEC60747−5−5 Option YY = Two Digit Year Code WW = Two Digit Work Week P = Assembly Package Code ♦ • • • • • • ♦ PIN CONNECTIONS TRUTH TABLE LED Vo Off Low On High Typical Applications • Isolating Intelligent Power Module • Isolating Industrial Communication Interface © Semiconductor Components Industries, LLC, 2019 August, 2019 − Rev. 1 ORDERING INFORMATION See detailed ordering, marking and shipping information in the package dimensions section on page 10 of this data sheet. 1 Publication Order Number: FOD8480/D FOD8480, FOD8482 Table 1. SAFETY AND INSULATION RATINGS for Stretched Body SOP 6−Pin As per DIN_EN/IEC60747−5−5. This optocoupler is suitable for “safe electrical insulation” only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. FOD8480 FOD8482 FOD8480T FOD8482T Installation Classifications per DIN VDE 0110/1.89 Table 1, for rated main voltage