FODM1009

Single Channel, DC Sensing Input, Phototransistor Optocoupler In Stretched Body SOP 4-Pin FODM100x Series www.onsemi.com Description The FODM100x Series, single channel, DC sensing input, optocoupler consists of one gallium arsenide (GaAs) infrared light emitting diode optically coupled to one phototransistor, in a stretched body SOP 4−pin package. The input−output isolation voltage, VISO, is rated at 5,000 VACRMS. SSOP4 / LSOP04 CASE 565BH Features • ≥ 8 mm Creepage and Clearance Distance, and ≥ 0.4 mm Insulation • • • • • • • • • • Distance to Achieve Reliable and High Voltage Insulation Safety and Regulatory Approvals UL1577, 5,000 VACRMS for 1 min DIN_EN/IEC60747−5−5, 890 V_Peak Working Voltage High Breakdown Collector to Emitter Voltage, BVCEO = 70 V Minimum Extended Industrial Temperate Range, −40 to 110°C Current Transfer Ratio at IF = 5 mA, VCE = 5 V, TA = 25°C FODM1007: 80 to 160% FODM1008: 130 to 260% FODM1009: 200 to 400% These are Pb−Free Devices MARKING DIAGRAM ON 100x = Specific Device Code (x = 7, 8, 9) V = DIN EN/IEC60747−5−5 Option (only appears on component ordered with this option) X = Last Digit Year Code YY = Two Digit Work Week L = Assembly Package Code Applications • • • • • Primarily Suited for DC−DC Converters For Ground Loop Isolation, Signal to Noise Isolation Communications – Adapters, Chargers Consumer – Appliances, Set−Top Boxes Industrial – Power Supplies, Motor Control, Programmable Logic Control 100x VXYYL PIN CONNECTIONS ANODE 1 CATHODE 2 4 COLLECTOR 3 EMITTER Related Resources • https://www.onsemi.com/products/optoelectronics/ • www.onsemi.com/datsheets/HM/HMHA2801.pdf © Semiconductor Components Industries, LLC, 2016 May, 2021 − Rev. 3 ORDERING INFORMATION See detailed ordering and shipping information on page 7 of this data sheet. 1 Publication Order Number: FODM1009/D FODM100x Series SAFETY AND INSULATION RATINGS (As per DIN EN/IEC 60747−5−5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits.) Parameter Characteristics Installation Classifications per DIN VDE 0110/1.89 Table 1, For Rated Mains Voltage