FSV340FP

Schottky Barrier Rectifier, Surface Mount FSV340FP, FSV360FP Features • Low Forward Voltage Drop: www.onsemi.com FSV340FP: 0.52 V Maximum at 3 A, TA = 25°C ♦ FSV360FP: 0.65 V Maximum at 3 A, TA = 25°C Larger Cathode Pad for Improved Power Dissipation Ultra Thin Profile − Maximum Height of 1.0 mm High Surge Capacity UL Flammability 94V−0 Classification MSL 1 Green Mold Compound These Devices are Pb−Free, Halogen Free Free and are RoHS Compliant ♦ • • • • • • • 1 Cathode 2 Anode Schottky Barrier Rectifier Specifications SOD−123EP CASE 425AC ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Value Parameter Symbol FSV340FP FSV360FP Unit VRRM Recurrent Peak Reverse Voltage 40 60 V VRMS RMS Reverse Voltage 28 42 V DC Blocking Voltage 40 60 V VR IF(AV) Average Forward Current at TL = 75°C 3 A IFSM Peak Forward Surge Current: 8.3 ms Single Half Sine−Wave Superimposed on Rated Load (JEDEC Method) 80 A Operating Junction Temperature Range −55 to +150 °C Storage Temperature Range −55 to +150 °C TJ TSTG June, 2020 − Rev. 6 &Y &Z**&G Band Indicates Cathode &Y &Z ** &G = Binary Calendar Year Coding Scheme = Assembly Plant Code = Specific Device Code − (FC, FD) = Single Digit Weekly Data Code ORDERING INFORMATION Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. © Semiconductor Components Industries, LLC, 2014 MARKING DIAGRAM 1 See detailed ordering and shipping information on page 2 of this data sheet. Publication Order Number: FSV360FP/D FSV340FP, FSV360FP THERMAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Note 1) Symbol Value Unit ΨJL Typical Thermal Characteristics, Junction−to−Lead (Note 2) Characteristic 10 °C/W RqJA Typical Thermal Resistance, Junction−to−Ambient 140 °C/W 1. Per JESD51−3 recommended thermal test board. Device mounted on FR−4 PCB, board size = 76.2 mm x 114.3 mm. 2. Thermocouple soldered at cathode lead. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol VF Parameter Forward Voltage IR Reverse Current Trr Reverse Recovery Time Conditions Min Typ Max Unit FSV340FP − − 0.52 V FSV360FP − − 0.65 VR = 40 V FSV340FP − − 160 VR = 60 V FSV360FP − − 100 IF = 0.5 A, IR = 1 A, Irr = 0.25 A FSV340FP − 12.37 − FSV360FP − 10.62 − IF = 3 A mA ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. ORDERING INFORMATION Part Number Top Mark Package Shipping† FSV340FP FC SOD−123EP (Pb−Free/Halogen Free) 3000 / Tape & Reel FSV360FP FD SOD−123EP (Pb−Free/Halogen Free) 3000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 2 FSV340FP, FSV360FP TYPICAL PERFORMANCE CHARACTERISTICS 10000 10000 100°C Reverse Current (mA) Reverse Current (mA) 1000 75°C 100 10 25°C 1000 100°C 100 75°C 10 25°C 1 1 FSV340FP 0.1 0 10 20 30 0.1 40 0 10 20 40 50 60 70 80 90 Reverse Voltage (V) Figure 1. Typical Reverse Characteristics Figure 2. Typical Reverse Characteristics 100 Forward Current (A) 10 125°C 100°C 1.0 75°C 10 100°C 75°C 25°C FSV340FP 0.2 0.3 0.4 0.5 0.6 0.7 125°C 1.0 25°C FSV360FP 0.1 0.8 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Forward Voltage (V) Forward Voltage (V) Figure 3. Typical Forward Characteristics Figure 4. Typical Forward Characteristics 400 CJ, Junction Capacitance (pF) 0.1 30 Reverse Voltage (V) 100 Forward Current (A) FSV360FP 350 300 250 200 150 100 50 0 0 12 24 36 48 60 VR, Reverse Bias Voltage (V) Figure 5. Typical Junction Capacitance www.onsemi.com 3 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SOD−123EP CASE 425AC ISSUE O DATE 31 AUG 2016 3.00 2.60 1.95 1.65 0.55 1.15 0.85 1.40 2.30 LAND PATTERN RECOMMENDATION 0.30 0.10 1.00 0.75 1.25 LONG PAD IS CATHODE 3.90 3.50 2.05 1.65 2.05 1.65 NOTES: 0.40 2.30 1.90 A. NO INDUSTRY STANDARD APPLIES TO THIS PACKAGE. B. ALL DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. 1.25 0.85 0.25 DOCUMENT NUMBER: DESCRIPTION: 1.20 0.55 98AON13723G SOD−123EP Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2018 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative