GBPC1502

Bridge Rectifiers (Glass Passivated) GBPC 12, 15, 25, 35 SERIES Features • Integrally Molded Heat−Sink Provided Very Low Thermal • • • • • • Resistance for Maximum Heat Dissipation Surge Overload Ratings from 300 A to 400 A Isolated Voltage from Case to Lead over 2500 V UL Certified, UL #E258596 Terminals Finish Material ♦ Silver (Solderable per MIL−STD−202, Method 208 for the wire type GBPC−W package) ♦ Nickel for GBPC package Mounting Torque: 20 in−lbs Maximum These are Pb−Free Devices www.onsemi.com GBPC CASE 160AD GBPC−W CASE 160AD PIN ASSIGNMENT Suffix “W” • Wire Lead Structure ~– +~ GBPC – ~ ~ + GBPC−W ORDERING INFORMATION See detailed ordering and shipping information on page 4 of this data sheet. © Semiconductor Components Industries, LLC, 2020 July, 2020 − Rev. 2 1 Publication Order Number: GBPC3510/D GBPC 12, 15, 25, 35 SERIES SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified.) (Note 1) Value 005 01 02 04 06 08 10 Units VRRM Maximum Repetitive Reverse Voltage 50 100 200 400 600 800 1000 V VRMS Maximum RMS Bridge Input Voltage 35 70 140 280 420 560 700 V DC Reverse Voltage (Rated VR) 50 100 200 400 600 800 1000 V Parameter Symbol VR IF(AV) IFSM TSTG TJ A GBPC12 12 GBPC15 15 GBPC25 25 GBPC35 35 Non−Repetitive Peak Forward Surge Current GBPC12, 15, 25 300 A 8.3 ms Single Half−Sine−Wave GBPC35 400 A Storage Temperature Range −55 to +150 _C Operating Junction Temperature −55 to +150 _C Average Rectified Forward Current at TC = 55_C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. These ratings are limiting values above which the serviceability of any semiconductor device may by impaired. THERMAL CHARACTERISTICS (TA = 25°C, unless otherwise specified.) Symbol PD RθJC Parameter Value Unit Power Dissipation 83.3 W Thermal Resistance, Junction to Case (Note 2) 1.5 _C/W 2. With Heatsink. ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified.) Symbol VF IR I2t CT Parameter Test Conditions Forward Voltage Drop, per bridge Reverse Current, per element at Rated VR Rating for Fusing t < 8.35 ms Total Capacitance, per leg VR = 4.0 V, f = 1.0 MHz Value Unit 1.1 (Max) V TA = 25_C 5.0 (Max) mA TA = 125_C 500 (Max) mA GBPC12, 15, 25 375 A2Sec GBPC35 660 A2Sec GBPC12, 15, 25 180 pF GBPC35 200 pF 6.0 A GBPC12 7.5 A GBPC15 12.5 A GBPC25 17.5 A GBPC35 Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 2 GBPC 12, 15, 25, 35 SERIES TYPICAL PERFORMANCE CHARACTERISTICS 30 GBPC25 20 GBPC15 10 0 400 Single phase half wave 60 Hz Resistive or Inductive load lengths GBPC35 Peak Forward Surge Current, IFSM (A) Average Rectified Forward Current, IF (A) 40 GBPC12 0 25 50 75 100 125 150 200 100 50 20 175 GBPC35 GBPC12−GBPC25 1 2 Case Temperature (5C) Figure 1. Forward Current Derating Curve 200 GBPC12−GBPC15 10 1 TA = 25°C Pulse Width = 300 ms 2% Duty Cycle 0.1 0.6 0.8 1 1.2 1.4 20 50 100 100 Reverse Current, IR (mA) Forward Current, IF (A) GBPC25 10 Figure 2. Non−Repetitive Surge Current GBPC35 100 5 Number of Cycles at 60 Hz 1.6 1.8 TA = 125°C 10 1 TA = 25°C 0.1 2 Forward Voltage, VF (V) 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage (per leg) (%) Figure 3. Forward Voltage Characteristics Figure 4. Reverse Current vs. Reverse Voltage www.onsemi.com 3 GBPC 12, 15, 25, 35 SERIES ORDERING INFORMATION Part Number Marking Package Packing Method GBPC12005 GBPC12005 Bulk GBPC1201 GBPC1201 GBPC 4L (Pb−Free) GBPC1202 GBPC1202 GBPC1204 GBPC1204 GBPC1206 GBPC1206 GBPC1208 GBPC1208 GBPC1210 GBPC1210 GBPC15005 GBPC15005 GBPC1501 GBPC1501 GBPC1502 GBPC1502 GBPC1504 GBPC1504 GBPC1506 GBPC1506 GBPC1508 GBPC1508 GBPC1510 GBPC1510 GBPC25005 GBPC25005 GBPC2501 GBPC2501 GBPC2502 GBPC2502 GBPC2504 GBPC2504 GBPC2506 GBPC2506 GBPC2508 GBPC2508 GBPC2510 GBPC2510 GBPC35005 GBPC35005 GBPC3501 GBPC3501 GBPC3502 GBPC3502 GBPC3504 GBPC3504 GBPC3506 GBPC3506 GBPC3508 GBPC3508 GBPC3510 GBPC3510 GBPC1201W GBPC1201W GBPC1202W GBPC1202W GBPC1204W GBPC1204W GBPC1206W GBPC1206W GBPC1208W GBPC1208W GBPC1210W GBPC1210W GBPC15005W GBPC15005W GBPC1501W GBPC1501W GBPC1502W GBPC1502W GBPC1504W GBPC1504W GBPC1506W GBPC1506W GBPC1508W GBPC1508W GBPC−W 4L (Pb−Free) www.onsemi.com 4 GBPC 12, 15, 25, 35 SERIES ORDERING INFORMATION (continued) Part Number Marking Package Packing Method GBPC1510W GBPC1510W Bulk GBPC25005W GBPC25005W GBPC−W 4L (Pb−Free) GBPC2501W GBPC2501W GBPC2502W GBPC2502W GBPC2504W GBPC2504W GBPC2506W GBPC2506W GBPC2508W GBPC2508W GBPC2510W GBPC2510W GBPC35005W GBPC35005W GBPC3501W GBPC3501W GBPC3502W GBPC3502W GBPC3504W GBPC3504W GBPC3506W GBPC3506W GBPC3508W GBPC3508W GBPC3510W GBPC3510W www.onsemi.com 5 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS GBPC4 28.75X28.75 CASE 160AD ISSUE A DOCUMENT NUMBER: DESCRIPTION: 98AON13489G GBPC4 28.75X28.75 DATE 19 MAR 2019 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2018 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative