C03E.pdf
Nov. 22,2019
Chip Multilayer Ceramic Capacitors
for Automotive
2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EU RoHS Compliant
F**2.0-"3!21',2&'1!2*-%!-+.*7
5'2& -@
F -'12 30-.#,'0#!2'4#
|z{{GG -,2#120'!2'-,-$2
1#-$#02',80"-313 12,!#1',
*#!20'!*," *#!20-,'! /3'.+#,2@
FFor+-0#"#2'*1A.*#1#0#$#r2o-ur5#
.%#A3021..0-!&$-0 -
H&22.1BGG555@+302@!-+G#,Q#3G13..-02G
!-+.*',!#G0-&1J@
C03E.pdf
Nov. 22,2019
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRT Series
Nov. 22,2019
GCM Series
Contents
Product specifications are as of October 2019.
p2
p3
p4
p5
p8
GC3 Series
Explanation of Symbols in This Catalog
Selection Guide for Capacitors
Catalog Information
Part Numbering
Capacitance Table
High Q Chip Multilayer Ceramic Capacitors for Automotive
GCQ Series
p50
p23
MLSC Design Chip Multilayer Ceramic Capacitors for Automotive
GCD Series
p56
p23
Soft Termination MLSC Design Chip Multilayer Ceramic Capacitors for Automotive
GCE Series
p58
p24
Very Large Current 3 Terminals Low ESL Chip Multilayer Ceramic Capacitors
for Automotive NFM Series
p60
p24
Metal Terminal Type Multilayer Ceramic Capacitors for Automotive
KCM Series
p63
p24
High Effective Capacitance & High Allowable Ripple Current Metal Terminal Type
Multilayer Ceramic Capacitors for Automotive KC3 Series
p67
p25
Safety Standard Certified Metal Terminal Type Multilayer Ceramic Capacitors
for Automotive KCA Series
p70
p25
AgPd Termination Conductive Glue Mounting Chip Multilayer Ceramic Capacitors
for Automotive GCG Series
p73
p25
!Caution/Notice
Web page SimSurfing
Introduction
Please check the MURATA website (https://www.murata.com/)
if you cannot find a part number in this catalog.
p77
p99
p100
GCQ Series
p20
GCD Series
p45
GCE Series
Soft Termination Chip Multilayer Ceramic Capacitors for Automotive
GCJ Series
NMF Series
p19
KCM Series
High Effective Capacitance & High Ripple Current Chip Multilayer Ceramic
Capacitors for Automotive GC3 Series
p43
KC3 Series
p15
KCA Series
p36
GCG Series
Chip Multilayer Ceramic Capacitors for Automotive
GCM Series
p9
!Caution
/Notice
AEC-Q200 Compliant Chip Multilayer Ceramic Capacitors for Infotainment
GRT Series
p29
GCJ Series
Cap. Table
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov. 22,2019
Explanation of Symbols in This Catalog
Links are provided to the latest information from the PDF version of the catalog, which is available on the web.
For applications that do not require the particular reliability such as
the general equipment
Infotainment for Automotive
The product for entertainment equipment like car navigations, car
audios, and body control equipment like wipers, power windows.
Powertrain/Safety for Automotive
Product used for applications (running, turning, stopping and safety
devices) which particularly concern human life, such as in devices for
automobiles.
Medical-grade products for Implanted Medical Devices
These products are intended for use in implanted medical devices
such as cardiac pacemakers, cochlear implants, insulin pumps and
gastric electrostimulators.
They are suitable for use in non-critical circuits. *1
*1 Non-critical circuits
This term refers to circuits in implanted medical devices that are
not directly linked to life support, i.e. circuits that will not directly
endanger the life of the patient should the functionality of the
device be reduced or halted by failure of the circuit.
Derating 1
This product is suitable when a voltage continuously applied to a
capacitor in an operating circuit, is used below (derated) the rated
voltage of the capacitor. This model guarantees the test conditions in
the endurance test, at a rated voltage x 100% at the maximum
operating temperature. A reliability assurance level equivalent to a
common product can be secured, by using this product within the
voltage and temperature derated conditions recommended in the
figure below.
Recommended Conditions of the Derating Operating Voltage and Temperature
Operating Voltage/Rated Voltage (%)
WEB
120
100
125°C Type
80
105°C Type
85°C Type
60
40
20
0
0
25
50
75
100
125
150
Product Temperature (°C)
AEC-Q200 compliant product
Safety Standard Certified Product
Products that acquired safety standard certification IEC60384-14
and products based on the Electrical Appliance and Material Safety
Law of Japan.
Derating 2
When the product temperature exceeds 105°C, please use this
product within the voltage and temperature derated conditions in the
figure below.
700
Rated Voltage 630V
600
Low inductance
This capacitor is designed so that the parasitic inductance
component (ESL) that the capacitor has on the high frequency side
becomes lower.
500
Rated Voltage (V)
Low dissipation for high frequency
By devising ceramic materials and electrode materials, low
dissipation is achieved in frequency bands of VHF, UHF and
microwave or beyond.
Product suitable for acoustic noise reduction and low distortion
This product suppresses acoustic noise, which occurs when a
ceramic capacitor is used, by devising the materials and
configuration.
No DC bias characteristics
Polymer capacitor is no capacitance change with DC bias due to
aluminum oxidized film for dielectric.
Low-inductance product suitable for noise suppression.
This product has extremely low ESL and is suitable for suppression
of noise, including high frequencies.
This product can also be used as a low-ESL, high-performance
bypass capacitor.
Limited to Conductive Glue Mounting
Since silver palladium is used for the external electrodes,the
capacitor can be mounted by conductive adhesive.
2
300
100
0
0
25
50
75
100
125
150
Product Temperature (°C)
Derating 3
Please apply the derating curve according to the operating
temperature.
Please refer to detailed specifications sheet for details.
Derating 4
When the product temperature exceeds 125°C, please use this
product within the voltage and temperature derated conditions in the
figure below.
Operating Voltage/Rated Voltage (%)
Product with solder cracking suppression
This capacitor is configured with metal terminals and leads
connected to the chip. The metal terminals and leads relieve the
stress from expansion and contraction of the solder, to suppress
solder cracking.
Rated Voltage 450V
400
(350V)
200
Fail safe product
This capacitor is designed to prevent failures as much as possible by
short mode.
Product resistant to deflection cracking
This capacitor is designed to prevent failures as much as possible by
short mode caused by cracking when there is board deflection.
(450V)
120
100
80
60
(50)
40
20
0
-75 -50 -25
0
25
50
75
100 125 150 175
Product Temperature (°C)
Derating 5
Please apply the rated voltage derating over 150°C. Please refer to
detailed specifications sheet for details.
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov. 22,2019
Selection Guide for Capacitors
For general
Infotainment for automotive
SMD
SMD
Solder mounting
Solder mounting
Chip type
Chip type
p29
GRT
GRM
Powertrain/Safety for automotive
SMD
Solder mounting
Chip type
WEB
GRM
For LCD backlight inverter circuit
only
WEB
GR3
High effective capacitance &
high ripple current
WEB
GRJ
Soft termination
WEB
GR4
For information devices only
WEB
GR7
For camera flash circuit only
WEB
p36
GJM
GC3
High effective capacitance &
high ripple current
p43
GQM
High power
WEB
GCJ
Soft termination
p45
GA2
Based on the Electrical Appliance
and Material Safety Law of Japan
WEB
GCM
WEB
p50
GA3
GCD
MLSC design
p56
LLL
LW reversed
WEB
GCE
Soft termination MLSC design
p58
LLA
8 terminals
WEB
NFM
3 terminals
p60
LLM
10 terminals
WEB
LLR
LW reversed controlled ESR
WEB
NFM
3 terminals
WEB
GJ4
Low distortion
WEB
GCQ
Metal terminal type
p63
KCM
KC3
High effective capacitance &
high ripple current
p67
p70
KCA
On interposer board
Limited to Conductive Glue Mounting
Chip type
GCB
Ni plating + Pd plating termination
WEB
conductive glue mounting
GCG
AgPd termination conductive glue
mounting
WEB
ZRA
WEB
ZRB
WEB
Metal terminal type
p73
KRM
Lead type
KR3
WEB
High effective capacitance &
high ripple current
WEB
Resin molding SMD type
Solder mounting
RCE
DK1
WEB
Polymer Aluminum Electrolytic Capacitors
RHE
150°C operation leaded
WEB
RHS
200°C operation leaded
WEB
ECAS
WEB
EC
ECNS
DE6
WEB
WEB
Wire bonding mounting
Chip type
Medical-grade products for implanted medical devices
SMD
GMA
Solder mounting
Microchip
GMD
WEB
WEB
Lead type
Chip type
GCH
WEB
Solder mounting
RDE
WEB
DE1
X1/Y1 Class certified product
WEB
DE2
X1/Y2 Class certified product
WEB
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Catalog Information
Catalog relates to a multilayer ceramic capacitor is below.
Chip Multilayer Ceramic Capacitors
for General
Chip Multilayer Ceramic Capacitors
for Automotive
Cat No. C02E-21
Cat No. C03E-10
Lead Type Disc Ceramic Capacitors (Safety Standard Certified)
Resin Molding SMD Type Ceramic Capacitors (Safety Standard Certified)
Leaded MLCC
Cat No. C85E-7
4
Cat No. C49E-24
C03E.pdf
Nov. 22,2019
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov. 22,2019
o Part Numbering
WEB
Chip Multilayer Ceramic Capacitors for Automotive
(Part Number)
GC
M
18
8 R7 1H 102
K
1
2
3
4 5
8
6
7
A37 D
9
:
4Height Dimension (T) (Except KCp)
1Product ID
2Series
Code
Dimension (T)
Series
3
0.3mm
3
High effective capacitance &High allowable ripple current
5
0.5mm
D
Specially designed product to reduce shorts
6
0.6mm
E
Specially designed product to reduce
shorts & resin electrode product
8
0.8mm
9
0.85mm
G
Limited to conductive glue mounting
A
1.0mm
J
Soft termination type
B
1.25mm
Product ID Code
GC
M
For automotive
C
1.6mm
Q
High Q Chip Multilayer Ceramic Capacitors for Automotive
D
2.0mm
T
Meet AEC-Q200 for infotainment
E
2.5mm
3
Metal terminal type/High effective capacitance
& High allowable ripple current
M
1.15mm
N
1.35mm
A
Metel terminal type/
Safety standard certified product
Q
1.5mm
X
Depends on individual standards.
M
Metal terminal type
GR
KC
4Height Dimension (T) (KCp Only)
3Chip Dimension (L x W)
Code
Dimension (L x W)
EIA
03
0.6 x 0.3mm
0201
15
1.0 x 0.5mm
0402
18
1.6 x 0.8mm
0603
21
2.0 x 1.25mm
0805
31
3.2 x 1.6mm
1206
32
3.2 x 2.5mm
1210
43
4.5 x 3.2mm
1812
55
5.7 x 5.0mm
2220
Code
Dimension (T)
L
2.8mm
R
3.6mm
Q
3.7mm
T
4.8mm
V
6.2mm
W
6.4mm
5Temperature Characteristics
Temperature
Characteristic Codes
Code
Public
STD Code
Temperature Characteristics
Reference Temperature Capacitance Change
or Temperature
Temperature
Range
Coefficient
Operating
Temperature
Range
Capacitance Change Each Temperature (%)
–55°C
*4
–10°C
Max.
Min.
Max.
Min.
Max.
Min.
5C
C0G
EIA
25°C
25 to 125°C
0±30ppm/°C
–55 to 125°C
0.58
–0.24
0.4
–0.17
0.25
–0.11
5G
X8G
*2
25°C
25 to 150°C
0±30ppm/°C
–55 to 150°C
0.58
–0.24
0.4
–0.17
0.25
–0.11
7U
U2J
EIA
25°C
–55 to 125°C
9E
ZLM
*2
20°C
8.78
5.04
6.04
3.47
3.84
2.21
–55 to –40°C –4700+1000/–2500ppm/°C
-
-
-
-
-
-
–40 to 20°C –5350±750ppm/°C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
25 to 125°C *3 –750±120ppm/°C
20 to 85°C
–4700±500ppm/°C
–55 to 125°C
85 to 125°C –4700+2000/–1000ppm/°C
C7
X7S
EIA
25°C
–55 to 125°C
±22%
–55 to 125°C
-
-
-
-
C8
X6S
EIA
25°C
–55 to 105°C
±22%
–55 to 105°C
-
-
-
-
-
-
D7
X7T
EIA
25°C
–55 to 125°C
+22%, –33%
–55 to 125°C
-
-
-
-
-
-
L8
X8L
*2
25°C
–55 to 150°C
+15%, –40%
–55 to 150°C
-
-
-
-
-
-
M8
X8M
*2
25°C
–55 to 150°C
+15%, –50%
–55 to 150°C
-
-
-
-
-
-
R6
X5R
EIA
25°C
–55 to 85°C
±15%
–55 to 85°C
-
-
-
-
-
-
R7
X7R
EIA
25°C
–55 to 125°C
±15%
–55 to 125°C
-
-
-
-
-
-
R9
X8R
EIA
25°C
–55 to 150°C
±15%
–55 to 150°C
-
-
-
-
-
-
*1 Capacitance change is specified with 50% rated voltage applied.
*2 Murata Temperature Characteristic Code.
*3 Rated Voltage 100Vdc max: 25 to 85°C
*4 –25°C (Reference Temperature 20°C) / –30°C (Reference Temperature 25°C)
Continued on the following page.
5
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
(Part Number)
Nov. 22,2019
GC
M
18
8 R7 1H 102
K
1
2
3
4 5
8
6
7
Continued from the preceding page.
8Capacitance Tolerance
6Rated Voltage
Code
Code
Standard
Product
Voltage Derated
Product
Rated Voltage
0E
-
DC2.5V
0G
-
DC4V
±0.1pF
C
±0.25pF
D
±0.5pF (Less than 10pF)
±0.5% (10pF and over)
0J
EC
DC6.3V
F
±1%
1A
ED
DC10V
G
±2%
1C
EE
DC16V
J
±5%
1E
EF
DC25V
K
±10%
YA
EG
DC35V
M
±20%
1H
EH
DC50V
W
±0.05pF
1J
-
DC63V
1K
-
DC80V
2A
EL
DC100V
2E
-
DC250V
2W
LP
DC450V
9Individual Specification Code
Expressed by three figures.
:Package
2J
LQ
DC630V
Code
Package
3A
-
DC1kV
L
ø180mm Embossed Taping
MF
-
X1/Y2: AC250V
(Safety Standard Certified Type MF)
D/W
ø180mm Paper Taping
K
ø330mm Embossed Taping
J
ø330mm Paper Taping
7Capacitance
Expressed by three-digit alphanumerics. The unit is pico-farad
(pF). The first and second figures are significant digits, and the
third figure expresses the number of zeros that follow the two
numbers.
If there is a decimal point, it is expressed by the capital letter "R."
In this case, all figures are significant digits.
If any letter, other than "R" is included, this indicates the specific
part number is a non-standard part.
Ex.)
Code
Capacitance
R50
0.50pF
1R0
1.0pF
100
10pF
103
10000pF
Please contact us if you find any part number not provided in this table.
6
Capacitance Tolerance
B
A37 D
9
:
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
WEB
3 Terminal Low ESL Multilayer Ceramic Capacitors
(Part Number)
NF
M
3D
CC 102
R
1H
3
1
2
3
4
6
7
8 9
5
L
7Rated Voltage
1Product ID 2Series
Product ID
Series
Code
Rated Voltage
NFM
3 Terminal Low ESL Type
0J
6.3V
1A
10V
1C
16V
3Dimensions (LxW)
Code
Dimensions (LxW)
EIA
1H
50V
18
1.6x0.8mm
0603
2A
100V
21
2.0x1.25mm
0805
31
3.2x1.6mm
1206
4Features
Code
HC
HK
C03E.pdf
Nov. 22,2019
8Electrode
Code
Electrode
3
Sn Plating
Features
Powertrain/Safety
for Automotive
For Signal Lines /
For Large Current
For Very Large Current
9Packaging
Code
Packaging
L
Embossed Taping (ø180mm Reel)
D
Paper Taping (ø180mm Reel)
5Capacitance
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.
6Characteristics
Code
Capacitance Temperature Characteristics
C
±22%
R
±15%, +15/-18%
Please contact us if you find any part number not provided in this table.
7
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov. 22,2019
Capacitance Table
Capacitance Table
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
How to read the Capacitance Table
L×W (mm)
0.6×0.3
1.0×
0.33
T max. (mm)
Rated Voltage (Vdc) 100 50
0.5
25 100 50
The values can be narrowed down in the order of size,
rated voltage, and temperature characteristics.
Cap. / TC Code C0G C0G C0G C0G C0
1.0pF p30 p30 p30 p30 p3
2.0pF p30 p30 p30 p30 p3
Refers to the page of the part number list.
Check the part number list for the applicable product number.
3.0pF p30 p30 p30 p30 p3
4.0pF p30 p30 p30 p30 p3
5.0pF p30 p30 p30 p30 p3
Temperature Characteristics Table
The Table is colored by temperature characteristic
codes. Refer to the following Table for the meaning
of each code.
Temperature
Characteristic Codes
Public
STD Code
Temperature Characteristics
Reference
Temperature
Temperature
Range
EIA
25°C
X8G
*1
25°C
U2J
EIA
25°C
C0G
25 to 125°C
Capacitance Change
or Temperature
Coefficient
Operating
Temperature
Range
*1
20°C
*3
–10°C
Min.
Max.
Min.
Max.
Min.
0.4
–0.17
0.25
–0.11
–55 to 125°C
0.58
–0.24
25 to 150°C
0±30ppm/°C
–55 to 150°C
0.58
–0.24
0.4
–0.17
0.25
–0.11
25 to 125°C *2
–750±120ppm/°C
–55 to 125°C
8.78
5.04
6.04
3.47
3.84
2.21
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
–40 to 20°C
–5350±750ppm/°C
20 to 85°C
–4700±500ppm/°C
85 to 125°C
–4700+2000/–1000ppm/°C
–55 to 125°C
X7S
EIA
25°C
–55 to 125°C
±22%
–55 to 125°C
-
-
-
-
-
-
X6S
EIA
25°C
–55 to 105°C
±22%
–55 to 105°C
-
-
-
-
-
-
X7T
EIA
25°C
–55 to 125°C
+22%, –33%
–55 to 125°C
-
-
-
-
-
-
X8L
*1
25°C
–55 to 150°C
+15%, –40%
–55 to 150°C
-
-
-
-
-
-
X8M
*1
25°C
–55 to 150°C
+15%, –50%
–55 to 150°C
-
-
-
-
-
-
X5R
EIA
25°C
–55 to 85°C
±15%
–55 to 85°C
-
-
-
-
-
-
X7R
EIA
25°C
–55 to 125°C
±15%
–55 to 125°C
-
-
-
-
-
-
X8R
EIA
25°C
–55 to 150°C
±15%
–55 to 150°C
-
-
-
-
-
-
*1 Murata Temperature Characteristic Code.
*2 Rated Voltage 100Vdc max: 25 to 85°C
*3 –25°C (Reference Temperature 20°C) / –30°C (Reference Temperature 25°C)
8
–55°C
Max.
0±30ppm/°C
–55 to –40°C –4700+1000/–2500ppm/°C
ZLM
Capacitance Change Each Temperature (%)
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
C03E.pdf
Nov. 22,2019
Capacitance Table
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
GRT Series Temperature Compensating Type
p00
← Part Number List
L×W (mm)
T max. (mm)
EIA: C0G
0.6×0.3
1.0×0.5
1.6×0.8
0.33
0.55
0.9
Rated Voltage (Vdc) 100 50
25 100 50
25 100 50
3.2×1.6
2.0×1.25
0.6 0.7 1.35 0.95
25
1.8
25 100 50 100 100 50
25
16
Cap. / TC Code C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G
1.0pF p30 p30 p30 p30 p31
2.0pF p30 p30 p30 p30 p31
3.0pF p30 p30 p30 p30 p31
4.0pF p30 p30 p30 p30 p31
5.0pF p30 p30 p30 p30 p31
6.0pF p30 p30 p30 p30 p31
7.0pF p30 p30 p30 p30 p31
8.0pF p30 p30 p30 p30 p31
9.0pF p30 p30 p30 p30 p31
10pF p30 p30 p30 p30 p31 p31
12pF p30 p30 p30 p30 p31 p31
15pF p30 p30 p30 p30 p31 p31
18pF p30 p30 p30 p30 p31 p31
22pF p30 p30 p30 p30 p31 p31
27pF p30 p30 p30 p30 p31 p31
33pF p30 p30 p30 p30 p31 p31
39pF p30 p30 p30 p30 p31 p31
47pF p30 p30 p30 p30 p31 p31
56pF p30 p30 p30 p30 p31 p31
68pF p30 p30 p30 p30 p31 p31
82pF p30 p30 p30 p31 p31 p31
100pF p30 p30 p30 p31 p31 p31
120pF
p30
p31 p31 p31
150pF
p30 p30
p31 p31 p31
180pF
p30 p30
p31 p31 p31
220pF
p30 p30
p31 p31 p31
270pF
p30
p31 p31 p31
330pF
p30
p31 p31 p31
390pF
p30
p31 p31 p31
470pF
p30
p31 p31 p31
560pF
p30
p31 p31 p31
680pF
p30
p31 p31 p31
820pF
p30
p31 p31 p31
1000pF
p30
p31 p31 p31
1200pF
p31 p31 p31
1500pF
p31 p31 p31
1800pF
p31
p31 p31
2200pF
p31
p31 p31
2700pF
p31
p32
3300pF
p31
p32
3900pF
p31
p32
4700pF
p31 p31
p32
5600pF
p31 p31
p32
6800pF
p31 p31
p32
8200pF
p31 p31
p32
10000pF
p31 p31
p32
18000pF
p32 p32
22000pF
p32 p32
56000pF
p32
68000pF
p32
82000pF
0.10μF
0.12μF
p32
p32 p32 p32
p32 p32
9
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Nov. 22,2019
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
GRT Series High Dielectric Constant Type
p00
← Part Number List
EIA: X6S
X7S X5R X7R X7T
0.6×0.3
L×W (mm)
Rated Voltage (Vdc) 35
1.0×0.5
0.35
0.33
T max. (mm)
25
16
10
6.3
4
6.3
4
0.55
0.39
10
6.3
2.5
50
35
25
Cap. / TC Code X5R X7R X6S X5R X7S X6S X5R X7R X7S X6S X5R X7R X7S X6S X5R X6S X5R X5R X6S X7T X6S X7T X7R X6S X5R X7R
100pF
p33
150pF
p33 p33 p33
220pF
p33
p33
330pF
p33
p33
470pF
p33 p33 p33
p33
680pF
p33
p33
1000pF
p33 p33 p33
p33
1500pF
p33
2200pF
p33 p33
p33
p33
3300pF
p33 p33
p33
p33
p33
4700pF
p33
p33 p33
p33
p33
6800pF
p33
p33 p33
p33
p33
10000pF
p33
p33 p33
p33 p33
p33 p33
p33
15000pF
p33
p33
p33 p33
p33
22000pF
p33
p33
p33 p33
p33
p34
33000pF
p33
p33
p33 p33
p33
p34
47000pF
p33
p33
p33 p33
p33
p34
68000pF
p33
p33
p33 p33 p33
p33
p33 p33 p33 p33 p33
p33 p33 p33
p33 p33 p33 p33
p33
p33
p33 p33 p33
0.10μF p33
p34
p34
0.15μF
0.22μF
0.33μF
p33
0.47μF
p33
p33 p33
p33
0.68μF
1.0μF
p33 p33 p33 p33 p33 p33
1.5μF
2.2μF
3.3μF
4.7μF
6.8μF
10μF
15μF
22μF
33μF
47μF
100μF
Continued on the following page.
10
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Nov. 22,2019
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ GRT Series High Dielectric Constant Type)
p00
← Part Number List
EIA: X6S
X7S X5R X7R X7T
1.0×0.5
L×W (mm)
0.55
T max. (mm)
Rated Voltage (Vdc)
25
16
6.3
4
35
25
16
10
0.7
0.65
0.6
10
6.3
4
10
6.3
25
16
10
6.3
Cap. / TC Code X6S X5R X7R X6S X5R X7R X6S X5R X7R X6S X5R X7R X5R X6S X6S X7S X5R X5R X5R X6S X5R X6S X5R X7S X6S X7S
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
p34
15000pF
22000pF
p34
33000pF
p34
47000pF
p34
68000pF
p34
0.10μF
p34
p34
0.15μF
0.22μF p34 p34 p34
p34 p34
0.33μF
0.47μF
p34
p34 p34 p34
0.68μF
1.0μF
p34
p34
p34
p34 p34
p34
p34 p34
p34
p34 p34
p34
p34 p34
p34 p34 p34 p34 p34 p34 p34 p34 p34 p34
1.5μF
2.2μF
p34
p34 p34
p34 p34 p34 p34 p34 p34
3.3μF
4.7μF
p34 p34 p34 p34
6.8μF
10μF
15μF
22μF
33μF
47μF
100μF
Continued on the following page.
11
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Nov. 22,2019
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ GRT Series High Dielectric Constant Type)
p00
← Part Number List
EIA: X6S
X7S X5R X7R X7T
L×W (mm) 1.0×
0.5
1.6×0.8
T max. (mm) 0.7
0.9
Rated Voltage (Vdc) 2.5 100 50
35
25
0.95
16
6.3
4
25
16
1.0
10
2.5
50
35
25
16
10
6.3
4
Cap. / TC Code X6S X7R X5R X6S X5R X7R X7R X5R X6S X5R X5R X6S X5R X5R X5R X5R X6S X5R X6S X5R X6S X7T X6S X5R X7T X6S X5R X6S
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
p34
4700pF
6800pF
10000pF
p34
15000pF
22000pF
33000pF
47000pF
68000pF
0.10μF
0.15μF
p34
0.22μF
p34
0.33μF
p34
0.47μF
p34 p34
0.68μF
1.0μF
p34 p34
p34 p34
p34
1.5μF
2.2μF
p34
p34 p34
p34
3.3μF
4.7μF
p34
p34 p34
p34 p34 p34
6.8μF
10μF p34
p34 p34 p34
p34 p34
p34 p34 p34 p34
p34 p34
15μF
22μF
p34
p34
p34 p34 p34
33μF
47μF
100μF
Continued on the following page.
12
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Nov. 22,2019
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ GRT Series High Dielectric Constant Type)
p00
← Part Number List
EIA: X6S
X7S X5R X7R X7T
3.2×
1.6
2.0×1.25
L×W (mm)
T max. (mm)
1.35
0.95
Rated Voltage (Vdc) 16
10 100 50
1.4
16
50
35
25
1.8
1.45
16
10
6.3
50
25
16
10
6.3
4
50
Cap. / TC Code X5R X6S X7R X7R X7R X5R X6S X7R X5R X7R X6S X7R X5R X5R X7S X7S X5R X7S X5R X7T X6S X7T X5R X6S X5R X6S
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
33000pF
47000pF
p35
68000pF
0.10μF
0.15μF
0.22μF
0.33μF
0.47μF
p35
0.68μF
1.0μF
p35
p35
1.5μF
2.2μF
p35
p35
3.3μF p34
4.7μF
p35
p35
p35 p35
p35
p35
p35 p35
p35
p35 p35
6.8μF
10μF
p35
p35
15μF
22μF
p35
p35 p35 p35 p35
33μF
47μF
p35 p35 p35
100μF
Continued on the following page.
13
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Nov. 22,2019
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ GRT Series High Dielectric Constant Type)
p00
← Part Number List
EIA: X6S
X7S X5R X7R X7T
Rated Voltage (Vdc)
3.2×2.5
3.2×1.6
L×W (mm)
1.8
T max. (mm)
25
1.5
1.8
16
50
35
25
16
10
6.3
25
2.2
50
2.7
6.3
50
16
10
6.3
Cap. / TC Code X6S X5R X6S X5R X7R X6S X5R X6S X5R X6S X5R X6S X5R X6S X5R X6S X6S X5R X5R X7R X6S X6S X6S X7R X7S X5R
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
33000pF
47000pF
68000pF
0.10μF
0.15μF
0.22μF
0.33μF
0.47μF
0.68μF
1.0μF
1.5μF p35 p35 p35 p35
2.2μF
p35 p35
p35 p35
3.3μF
p35 p35
p35
4.7μF
6.8μF
10μF
p35 p35
p35
p35 p35
p35 p35 p35 p35
15μF
22μF
p35
p35
33μF
47μF
p35
p35 p35
p35 p35 p35
100μF
14
p35 p35
p35
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Nov. 22,2019
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
GCM Series Temperature Compensating Type
p00
← Part Number List
L×W (mm)
T max. (mm)
EIA: C0G U2J
Murata Temperature Characteristic: X8G ZLM
0.6×0.3
1.0×0.5
1.6×0.8
0.33
0.55
0.9
Rated Voltage (Vdc) 50
25
50
100
80
2.0×1.25
0.7
50
0.95
100 80 100 80
1.0
50 630
250
3.2×1.6
1.4
80
1.45
50 630
250
0.95
1.0
100 80
1000
Cap. / TC Code C0G C0G C0G X8G C0G U2J C0G C0G U2J C0G C0G ZLM C0G C0G C0G C0G U2J C0G C0G C0G C0G U2J C0G C0G C0G U2J
1.0pF p37 p37 p37 p37 p38
2.0pF p37 p37 p37 p37 p38
3.0pF p37 p37 p37 p37 p38
4.0pF p37 p37 p37 p37 p38
5.0pF p37 p37 p37 p37 p38
6.0pF p37 p37 p37
p38
7.0pF p37 p37 p37
p38
8.0pF p37 p37 p37
p38
9.0pF p37 p37 p37
p38
10pF p37 p37 p37
p38
p39 p39
p39 p39
p39 p39
p39 p39
p39 p39
p39 p39
p39 p39
p39 p39
p39 p39
p39 p39
p39 p39
p39 p39
p39 p39 p39
p39 p39
p39 p39 p39
p39 p39
p39 p39 p39
p39 p39
p39 p39 p39
p39 p39
p39 p39 p39
p39
12pF p37 p37 p37 p37 p38
15pF p37 p37 p37 p37 p38
18pF p37 p37 p37 p37 p38
22pF p37 p37 p37 p37 p38
27pF p37 p37 p37 p37 p38
33pF p37 p37 p37 p37 p38
39pF p37 p37 p37 p37 p38
47pF p37 p37 p37 p37 p38
56pF p37 p37 p37 p37 p38
68pF p37 p37 p37 p37 p38
82pF p37 p37 p37 p37 p38
100pF p37 p37 p37 p37 p38
120pF
p37 p37 p38
150pF
p37 p37 p38
180pF
p37 p37 p38
220pF
p37 p37 p38
270pF
p37 p37 p38
330pF
p37 p37 p38
390pF
p37 p38 p38
470pF
p37 p38 p38
560pF
p37 p38 p38
680pF
p37 p38 p38
820pF
p37 p38 p38
1000pF
p37 p38 p38 p38
p38
p38
1100pF
1200pF
p39
p39 p39
p39
p39 p39
p39
p39 p39
p39
p38
p38 p38
p38 p38
p38 p38
p38 p38
p38
1300pF
1500pF
p39 p39
p38
p38
1800pF
p38 p38 p38 p38 p38
2200pF
p38 p38 p38 p38 p38
2700pF
p38 p38 p38 p38 p38
3300pF
p38
3900pF
p38 p38 p38 p38
4700pF
p38
p38 p38
5600pF
p38
p38 p38
6800pF
p38
p38 p38
p39
8200pF
p38
p38 p38
p39
10000pF
p38
p38 p38
p39
p39 p39
p38 p38 p38
p39
p39 p39 p39
p38
p39
12000pF
p39 p39
15000pF
p39 p39
p39
p39
p39
p39
18000pF
p39 p39
22000pF
p39 p39
p39
27000pF
p39
33000pF
p39
39000pF
47000pF
68000pF
82000pF
0.10μF
Continued on the following page.
15
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Nov. 22,2019
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ GCM Series Temperature Compensating Type)
p00
← Part Number List
EIA: C0G U2J
Murata Temperature Characteristic: X8G ZLM
3.2×1.6
L×W (mm)
T max. (mm)
1.0
Rated Voltage (Vdc)
630
3.2×2.5
1.25
1000
1.8
630
250
1000
630
1.0
1.5
4.5×3.2
2.0
1.5
2.0
5.7×5.0
1.5
2.0
250 100 100 630 1000 630 1000 630 10001000 630 10001000 630
Cap. / TC Code C0G U2J C0G U2J C0G U2J U2J C0G U2J C0G U2J C0G C0G C0G U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J
1.0pF
2.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF p39 p39
12pF
15pF p39 p39
18pF
22pF p39 p39
27pF
33pF p39 p40
39pF
47pF p39 p40
56pF
68pF p39 p40
82pF
100pF p39 p40
120pF
150pF p39 p40
180pF
220pF p39 p40
270pF
330pF p39 p40
390pF
470pF p39 p40
p40
560pF
680pF p39 p40 p40 p40
820pF
1000pF p39 p40
p40 p40
1100pF
1200pF
1300pF
1500pF p39 p40
p40 p40
1800pF
2200pF
p40
p40
p40
p40
2700pF
3300pF
p40
p40
p40
3900pF
4700pF
p40 p40
p40
5600pF
6800pF
p40
p40
p40
8200pF
10000pF
p40
p40
p40
12000pF
15000pF
p40
p40
p40
p40
18000pF
22000pF
27000pF
33000pF
p40
39000pF
47000pF
16
p40
68000pF
p40 p40
82000pF
p40 p40
0.10μF
p40 p40
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Nov. 22,2019
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
GCM Series High Dielectric Constant Type
p00
← Part Number List
L×W (mm)
EIA: X7S
X7T X7R X8R
0.6×0.3
T max. (mm)
Rated Voltage (Vdc) 25
1.0×0.5
10 100
50
25
2.0×1.25
1.6×0.8
0.55
0.33
16
Murata Temperature Characteristic: X8L X8M
16
0.6 0.7
0.9
10
25
10 100 50
1.0
16
6.3 6.3
1.4
0.95
4
100 50
25
16 100 50
35
Cap. / TC Code X7R X7R X7R X7R X8L X7R X8L X7R X7R X7S X7S X7R X7R X7R X7R X7R X7T X7T X7R X7R X7R X7R X7R X7R X8L X7R
100pF p41
150pF p41
220pF p41
p41
p41
330pF p41 p41
p41
p41
470pF p41
p41
p41
680pF p41 p41
p41
p41
1000pF p41
p41
p41
1500pF p41
p41
p41
2200pF p41 p41
p41
p41
3300pF p41 p41
p41
p41
4700pF
p41 p41
p41
6800pF
p41
p41
10000pF
p41
p41
p41
p41
15000pF
p41
p41
p41
22000pF
p41
p41
p41
33000pF
p41 p41
p41 p41
47000pF
p41 p41
p41 p41
p41
68000pF
p41 p41
p41
p41
p41 p41 p41
p41
p41
0.10μF
p41
0.15μF
p41
0.22μF
p41
p41
p41 p41
0.33μF
0.47μF
p41
p41
p41
p41 p41
p41
0.68μF
p41
1.0μF
p41
p41
p41
p41
p41 p41
p41
p41
p41
1.5μF
2.2μF
p41
p41
p41
4.7μF
10μF
p41 p41
22μF
47μF
Continued on the following page.
17
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Nov. 22,2019
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ GCM Series High Dielectric Constant Type)
p00
← Part Number List
EIA: X7S
X7T X7R X8R
2.0×1.25
L×W (mm)
3.2×1.6
1.4
T max. (mm)
Rated Voltage (Vdc) 35
Murata Temperature Characteristic: X8L X8M
25
16
1.25
1.45
10
6.3 100
35
25
16
100 25
1.8
100
50
25
16
10
6.3
Cap. / TC Code X7S X8L X7R X7R X7R X7S X7R X7S X8L X7S X8L X7S X8M X7S X7R X8L X8L X7S X8L X7R X7S X8R X7R X7R X7R X7R
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
33000pF
47000pF
68000pF
0.10μF
0.15μF
0.22μF
0.33μF
p42
p42
0.47μF
0.68μF
p42
1.0μF
p42
1.5μF
p42 p42
2.2μF p41
4.7μF
10μF
22μF
p42
p42
p42 p42 p42
p42 p42
p42
p42
p42
p42
p42 p42 p42 p42
p42
p42
p42
p42
p42 p42
p42 p42
p42
p42 p42
47μF
Continued on the following page.
18
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Nov. 22,2019
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ GCM Series High Dielectric Constant Type)
p00
← Part Number List
EIA: X7S
X7T X7R X8R
L×W (mm) 3.2×
1.6
Murata Temperature Characteristic: X8L X8M
3.2×2.5
T max. (mm) 1.9
2.2
Rated Voltage (Vdc) 25
100
2.7
50
35
25
2.85
16
10
6.3
25
Cap. / TC Code X7S X8L X7S X8L X7R X7S X7S X7R X7R X7R X7S X7R X8L X7S
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
33000pF
47000pF
68000pF
0.10μF
0.15μF
0.22μF
0.33μF
0.47μF
0.68μF
1.0μF
1.5μF
2.2μF
4.7μF
p42 p42
10μF p42
p42
p42
p42 p42 p42
22μF
p42 p42
47μF
p42 p42
p42 p42
GC3 Series High Dielectric Constant Type
p00
← Part Number List
EIA: X7T
L×W (mm) 2.0×1.25
T max. (mm) 1.0 1.45
3.2×1.6
1.0
3.2×2.5
1.25
1.5
1.8
4.5×3.2
1.5
2.0
5.7×5.0
2.0
2.0
2.7
Rated Voltage (Vdc) 250 250 450 250 630 450 250 630 450 250 630 250 630 450 250 250 630 450 250 630 450 250 630 250
Cap. / TC Code X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T
10000pF p44
p44
15000pF p44
p44
22000pF
33000pF
47000pF
68000pF
0.10μF
0.15μF
0.22μF
0.33μF
p44
p44
p44
p44
p44
p44
p44
p44
p44
p44
p44
p44
p44
p44
p44
p44
p44
p44
p44
p44
p44
p44
p44
p44
p44
0.47μF
p44 p44
0.68μF
p44
1.0μF
p44
19
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Nov. 22,2019
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
GCJ Series High Dielectric Constant Type
p00
← Part Number List
EIA: X7S X7R X8R
Murata Temperature Characteristic: X8L X8M
1.6×0.8
L×W (mm)
Rated Voltage (Vdc)
2.0×1.25
0.9
T max. (mm)
100
50
35
0.95
1.0
25
16
10
100 50
6.3
6.3
25
1.0
1.45
16 250 250 100
50
Cap. / TC Code X8L X8R X7R X8L X8R X7R X8L X8L X8R X7R X8L X7R X7R X7R X8L X8M X7S X7R X7R X7R X7R X7R X7R X7R X8L X7R
1000pF
p46 p46
p46
p46
1200pF
p46 p46
p46
p46
1500pF
p46 p46
p46
p46
1800pF
p46 p46
p46
p46
2200pF
p46 p46
p46
p46
2700pF
p46 p46
p46
p46
3300pF
p46 p46
p46
p46
3900pF
p46 p46
p46
p46
4700pF
p46 p46
p46 p46
p46
5600pF
p46 p46
p46
p46
6800pF
p46 p46
p46
p46
8200pF
p46 p46
p46
p46
10000pF
p46 p46
p46 p46
p46
12000pF
p46 p46
p46
p46
15000pF
p46 p46
p46
p47
18000pF
p46 p46
p46
p47
22000pF
p46 p46
p46
p47
27000pF
p46
33000pF
p46
39000pF
p46
47000pF
p47
p47
p47
p47
p47
p47
p47
p47
p47
p47
p47
p47
p46 p46 p46
p47
p47
p47
p46 p46 p46
p47
p47
p47
p46
p46
p47
p47
p47
56000pF
p46
p46 p46 p46
p47
p47
p47
68000pF
p46
p46 p46 p46
p47
p47
p47
p46
p47
p47
p47 p47
p46 p46
p47
p47
p47 p47
0.12μF
p46
p47
p47
0.15μF
p46 p46 p46
p46
p47
p47
0.18μF
p46
p46
p47
p47
0.22μF
p46 p46 p46
p46
p47 p47 p47 p47
82000pF
0.10μF p46
p46
p46
0.27μF
p47
p47
0.33μF
p46
p47
0.39μF
p46
p47
0.47μF
p46
p47
p47 p47
p47
p47 p47
0.56μF
0.68μF
p47
0.82μF
1.0μF
p47
p47
p47
p47
1.5μF
2.2μF
3.3μF
4.7μF
p47
p47
p47
p47 p47
6.8μF
10μF
22μF
47μF
Continued on the following page.
20
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Nov. 22,2019
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ GCJ Series High Dielectric Constant Type)
p00
← Part Number List
EIA: X7S X7R X8R
2.0×1.25
L×W (mm)
3.2×1.6
1.45
T max. (mm)
Rated Voltage (Vdc) 35
Murata Temperature Characteristic: X8L X8M
25
1.5
16
1.25
1.35
10 100 1000 630 250 100 50
1.8
1.9
25 1000 630 250
100
50
35
25
16
10
Cap. / TC Code X8L X8L X7R X8L X7R X7R X7S X7R X7R X7R X7R X7R X7R X7R X7R X7R X8L X7R X7S X7R X7S X8L X7R X8L X7R X8L
1000pF
p48 p48
1200pF
1500pF
p48 p48
1800pF
2200pF
p48 p48
2700pF
3300pF
p48 p48
3900pF
4700pF
p48 p48
5600pF
6800pF
p48
p48
p48
p48
8200pF
10000pF
12000pF
15000pF
p48
p48
p48
p48
18000pF
22000pF
27000pF
33000pF
p48
39000pF
47000pF
p48
56000pF
68000pF
p48
82000pF
0.10μF
p48
0.12μF p47 p47
0.15μF p47 p47
p48
0.18μF p47 p47
p48
0.22μF p47 p47
0.27μF
p48
p47 p47
p47
0.33μF p47 p47
p47
0.39μF
p47
p47 p47
0.47μF p47 p47
0.56μF
p47
p48
p47 p47 p47
p48
p48
0.68μF
p47 p47 p47
p48
p48
0.82μF
p47 p47 p47
p48
1.0μF
p48
p47 p47 p47 p47
1.5μF
p47
2.2μF
p47
p48
p48
p48 p48
3.3μF
4.7μF
p48
p48 p48
p48
p48
p48 p48
p48 p48
p48
p48
p48
p48 p48 p48
6.8μF
10μF
22μF
p48
p48
p48
47μF
Continued on the following page.
21
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Nov. 22,2019
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ GCJ Series High Dielectric Constant Type)
p00
← Part Number List
Murata Temperature Characteristic: X8L X8M
3.2×2.5
3.2×1.6
L×W (mm)
T max. (mm)
EIA: X7S X7R X8R
1.9
Rated Voltage (Vdc) 10
6.3
2.0
25
1.5
2.0
4.5×3.2
2.3
630 250 1000 630 250
100
2.8
50
25
2.85
16
6.3
25
1.5
5.7×5.0
2.0
2.0
630 250 1000 630 250 1000 630 250
Cap. / TC Code X7R X7R X8L X7S X7R X7R X7R X7R X7R X8L X7R X7S X7R X7S X8L X8R X7R X7R X8L X7S X7R X7R X7R X7R X7R X7R X7R X7R
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
p48
8200pF
10000pF
p48
12000pF
15000pF
p48 p48
18000pF
22000pF
p48 p48
27000pF
33000pF
p48
p48 p48
p48
p48 p48
39000pF
47000pF
56000pF
68000pF
p48
p48
p49
82000pF
0.10μF
p49 p49
p48
p48
0.12μF
0.15μF
p49
p48
p48
0.18μF
0.22μF
p48
p48
p49
0.27μF
0.33μF
p48
p49
p49
p49
0.39μF
0.47μF
0.56μF
0.68μF
p49
0.82μF
1.0μF
p49
1.5μF
2.2μF
p48 p48
3.3μF
4.7μF
p48 p48
p48
6.8μF p48
10μF p48
22μF p48 p48
47μF
22
p48
p48 p48
p48
p48
p48
p48 p48
p48
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
GCQ Series Temperature Compensating Type
p00
← Part Number List
GCD Series High Dielectric Constant Type
EIA: C0G
p00
← Part Number List
L×W (mm) 1.0×
0.5
L×W (mm) 1.0×
0.5
L×W (mm) 1.0×
0.5
L×W (mm)
T max. (mm) 0.55
T max. (mm) 0.55
T max. (mm) 0.55
T max. (mm)
Rated Voltage (Vdc) 50
Nov. 22,2019
Rated Voltage (Vdc) 50
Rated Voltage (Vdc) 50
EIA: X7S X7R
1.6×0.8
2.0×1.25
0.9
1.4
Rated Voltage (Vdc) 100 50
25 100 50
16
Cap. / TC Code X7R X7R X7R X7R X7R X7S
Cap. / TC Code C0G
Cap. / TC Code C0G
Cap. / TC Code C0G
0.10pF p52
5.6pF p53
30pF p55
1000pF p57 p57
0.20pF p52
5.7pF p53
33pF p55
1200pF p57 p57
0.30pF p52
5.8pF p53
36pF p55
1500pF p57 p57
0.40pF p52
5.9pF p53
39pF p55
1800pF p57 p57
0.50pF p52
6.0pF p53
43pF p55
2200pF p57 p57
0.60pF p52
6.1pF p53
47pF p55
2700pF p57 p57
0.70pF p52
6.2pF p53
3300pF p57 p57
0.80pF p52
6.3pF p53
3900pF p57 p57
0.90pF p52
6.4pF p53
4700pF p57 p57
1.0pF p52
6.5pF p53
5600pF p57 p57
1.1pF p52
6.6pF p53
6800pF p57 p57
1.2pF p52
6.7pF p53
8200pF p57 p57
1.3pF p52
6.8pF p53
10000pF p57 p57
1.4pF p52
6.9pF p53
12000pF p57 p57
1.5pF p52
7.0pF p54
15000pF p57 p57
1.6pF p52
7.1pF p54
18000pF p57 p57
1.7pF p52
7.2pF p54
22000pF p57 p57
1.8pF p52
7.3pF p54
27000pF
p57 p57 p57
1.9pF p52
7.4pF p54
33000pF
p57 p57 p57
2.0pF p52
7.5pF p54
39000pF
p57 p57 p57
2.1pF p52
7.6pF p54
47000pF
p57 p57 p57
2.2pF p52
7.7pF p54
56000pF
p57 p57
2.3pF p52
7.8pF p54
68000pF
p57 p57
2.4pF p52
7.9pF p54
82000pF
p57 p57
2.5pF p52
8.0pF p54
0.10μF
p57 p57
2.6pF p52
8.1pF p54
0.47μF
2.7pF p52
8.2pF p54
2.8pF p52
8.3pF p54
2.9pF p52
8.4pF p54
3.0pF p52
8.5pF p54
3.1pF p52
8.6pF p54
3.2pF p52
8.7pF p54
3.3pF p52
8.8pF p54
3.4pF p52
8.9pF p54
3.5pF p52
9.0pF p54
3.6pF p52
9.1pF p54
3.7pF p52
9.2pF p54
3.8pF p52
9.3pF p54
3.9pF p52
9.4pF p54
4.0pF p53
9.5pF p54
4.1pF p53
9.6pF p54
4.2pF p53
9.7pF p55
4.3pF p53
9.8pF p55
4.4pF p53
9.9pF p55
4.5pF p53
10pF p55
4.6pF p53
11pF p55
4.7pF p53
12pF p55
4.8pF p53
13pF p55
4.9pF p53
15pF p55
5.0pF p53
16pF p55
5.1pF p53
18pF p55
5.2pF p53
20pF p55
5.3pF p53
22pF p55
5.4pF p53
24pF p55
5.5pF p53
27pF p55
p57
23
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
GCE Series High Dielectric Constant Type
p00
← Part Number List
L×W (mm)
T max. (mm)
NFM Series
EIA: X7R
p00
1.6×0.8
2.0×1.25
0.9
1.45
Rated Voltage (Vdc) 100 50
← Part Number List
L×W (mm)
1.6×0.8
2.0×1.25
3.2×1.6
0.7
0.95
1.5
T max. (mm)
25 100 50
Rated Voltage (Vdc) 16
Cap. / TC Code X7R X7R X7R X7R X7R
-
Cap. / TC Code
1000pF p59 p59
6.3
-
50
16
-
-
10 100 50
-
220pF
p62
1200pF p59 p59
470pF
p62
1500pF p59 p59
1000pF
p62
1800pF p59 p59
2200pF
p62
2200pF p59 p59
10000pF
2700pF p59 p59
15000pF
3300pF p59 p59
22000pF
3900pF p59 p59
0.10μF
p62
4700pF p59 p59
0.22μF
p62
5600pF p59 p59
0.47μF
6800pF p59 p59
-
-
p62 p62
p62
p62
p62
p62
p62
1.0μF p62 p62
p62
8200pF p59 p59
10000pF p59 p59
KCM Series Temperature Compensating Type
12000pF p59 p59
15000pF p59 p59
p00
← Part Number List
EIA: C0G
18000pF p59 p59
22000pF p59 p59
6.1×5.1
L×W (mm)
27000pF
p59 p59 p59
33000pF
p59 p59 p59
Rated Voltage (Vdc) 630 630 630 630
39000pF
p59 p59 p59
Cap. / TC Code C0G C0G C0G C0G
47000pF
p59 p59 p59
0.015μF p65
56000pF
p59 p59
0.018μF p65
68000pF
p59 p59
0.022μF
p65
82000pF
p59 p59
0.027μF
p65
0.10μF
p59 p59
0.030μF
p65
0.036μF
p65
T max. (mm) 3.1
3.9 5.1 6.6
0.044μF
p65
0.054μF
p65
KCM Series High Dielectric Constant Type
p00
← Part Number List
EIA: X7S X7R
6.1×5.3
L×W (mm)
T max. (mm)
Rated Voltage (Vdc) 100 63
50
5.0
3.9
3.0
35
25 100 63
50
35
25
50
6.7
35 100 63
50
35
25
Cap. / TC Code X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7S X7R X7R X7R X7R X7R X7R X7R X7S
4.7μF p66 p66 p66
6.8μF
10μF
15μF
17μF
p66 p66
p66 p66
p66
p66 p66
22μF
p66 p66
33μF
p66
47μF
68μF
100μF
24
p66
p66 p66
p66 p66
p66
p66
p66
p66
p66 p66
p66
p66
C03E.pdf
Nov. 22,2019
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
KC3 Series High Dielectric Constant Type
p00
← Part Number List
GCG Series Temperature Compensating Type
EIA: X7T
p00
← Part Number List
EIA: U2J
Murata Temperature Characteristic: X8G
6.1×5.3
L×W (mm)
T max. (mm)
Nov. 22,2019
3.9
3.0
5.0
6.7
Rated Voltage (Vdc) 630 450 250 630 450 250 630 450 250 630 450 250
Cap. / TC Code X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T
L×W (mm) 1.0×
0.5
1.6×0.8
Rated Voltage (Vdc) 50
2.0×1.25
0.7 0.95
0.9
T max. (mm) 0.55
100
50
50
0.15μF p69
10pF
p74
p74
p69
12pF
p74
p74
p69
15pF
p74
p74
18pF
p74
p74
p69
22pF
p74
p74
p69
27pF
p74
p74
p69 p69
33pF
p74
p74
p69 p69 p69 p69
39pF
p74
p74
47pF
p74
p74
56pF
p74
p74
68pF
p74
p74
82pF
p74
p74
100pF
p74
p74
120pF p74 p74
p74
150pF p74 p74
p74
180pF p74 p74
p74
6.1×5.3
220pF p74 p74
p74
3.9 5.0 6.7
270pF p74 p74
p74
Rated Voltage (Vac (r.m.s.)) 250 250 250 250
330pF p74 p74
p74
Cap. / TC Code U2J U2J U2J U2J
390pF p74 p74
p74
100pF p72
470pF p74 p74
p74
150pF p72
560pF
p74
p74
220pF p72
680pF
p74
p74
330pF p72
820pF
p74
p74
470pF p72
1000pF
p74 p74 p74 p74
0.22μF
p69
0.27μF
0.33μF p69 p69
0.47μF p69 p69 p69
0.56μF
0.68μF
p69 p69
p69 p69
1.0μF
1.2μF
p69 p69
1.5μF
p69 p69
2.2μF
p69 p69
KCA Series Temperature Compensating Type
p00
← Part Number List
L×W (mm)
T max. (mm) 3.0
50
Cap. / TC Code X8G X8G U2J X8G X8G X8G
0.10μF p69
EIA: U2J
680pF p72
1200pF
p74 p74 p74
1000pF p72
1500pF
p74 p74 p74
1500pF p72
1800pF
p74 p74 p74
2200pF p72
2200pF
p74 p74 p74
3300pF p72
2700pF
p74
p74
3300pF
p74
p74
3900pF
p74
p74
4700pF
p74
p74
5600pF
p74
p74
6800pF
p74
p74
8200pF
p74
p74
10000pF
p74
p74
4700pF
6800pF
10000pF
p72
p72
p72
25
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Nov. 22,2019
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
GCG Series High Dielectric Constant Type
p00
← Part Number List
EIA: X7S X7R X8R
L×W (mm)
T max. (mm)
Rated Voltage (Vdc)
50
Murata Temperature Characteristic: X8L
1.0×0.5
1.6×0.8
0.55
0.9
25
16
100
50
25
2.0×1.25
1.45
16
10
6.3
50
35
25
16
10
Cap. / TC Code X8L X7R X8L X7R X8L X7R X8R X8L X8R X7R X8R X7R X8L X7R X7R X7R X8L X7R X8L X7R X8L X8R X7R X8L X7R X7R
220pF p75 p75
270pF
p75
330pF p75 p75
390pF
p75
470pF p75 p75
560pF
p75
680pF p75 p75
820pF
p75
1000pF p75 p75
p75
1200pF
p75
p75
p75
1500pF p75 p75
p75
p75
1800pF
p75
p75
2200pF p75 p75
p75
p75
2700pF
p75
p75
p75
3300pF p75 p75
p75
p75
3900pF
p75
p75
p75
4700pF p75 p75
p75
p75
5600pF
p75 p75
p75
p75
6800pF
p75 p75
p75
p75
8200pF
p75 p75
p75
p75
10000pF
p75 p75
p75
p75
12000pF
p75
15000pF
p75 p75 p75
18000pF
p75 p75 p75
22000pF
p75 p75 p75
27000pF
p75 p75 p75
33000pF
p75 p75 p75
39000pF
p75 p75 p75
47000pF
p75 p75 p75
56000pF
p75 p75
68000pF
p75 p75
82000pF
p75
0.10μF
p75 p75
p75
p75
p75
p75
p75
0.12μF
p75
0.15μF
p75 p75 p75
0.18μF
p75
0.22μF
p75 p75 p75
p75
p76 p76
p76
p76
p76
p76 p76
p76
0.27μF
p76
0.33μF
p75
0.39μF
p75
0.47μF
p75
p76
p76
p76 p76
p76
p76 p76
0.56μF
p76 p76
0.68μF
p76 p76
0.82μF
1.0μF
p76 p76
p76 p76 p76
p76 p76
p76 p76 p76 p76
p76 p76
p76 p76
1.2μF
1.5μF
2.2μF
p76 p76
3.3μF
3.9μF
4.7μF
p76
6.8μF
10μF
p76
22μF
47μF
26
Continued on the following page.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
C03E.pdf
Nov. 22,2019
p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ GCG Series High Dielectric Constant Type)
p00
← Part Number List
EIA: X7S X7R X8R
L×W (mm) 2.0×1.25
T max. (mm)
Rated Voltage (Vdc)
3.2×1.6
1.45
6.3
Murata Temperature Characteristic: X8L
1.35
50
25
3.2×2.5
2.8
1.9
16
25
16
6.3
50
25
35
16
6.3
Cap. / TC Code X8L X7R X8R X7R X8L X7R X8L X8R X7R X8L X7S X8L X7S X8L X7R X7S X8R X7R
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
56000pF
68000pF
82000pF
0.10μF
0.12μF
0.15μF
0.18μF
0.22μF
p76
0.27μF
0.33μF
p76
0.39μF
0.47μF
0.56μF
0.68μF
p76
0.82μF
1.0μF
p76
p76
1.2μF
p76
1.5μF
p76 p76
2.2μF
p76
3.3μF
p76 p76
3.9μF
p76
4.7μF
p76 p76
6.8μF
p76
10μF p76 p76
22μF
47μF
p76 p76 p76 p76
p76
p76
p76
p76
p76
p76
27
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Search Capacitors
GRT Series Temperature Compensating
1.0×0.5mm
Rated
TC
Voltage Code
Cap.
0.55mm 100Vdc C0G
T
max.
1.0pF
±0.25pF GRT1555C2A1R0CA02#
2.0pF
±0.25pF GRT1555C2A2R0CA02#
3.0pF
±0.25pF GRT1555C2A3R0CA02#
4.0pF
±0.25pF GRT1555C2A4R0CA02#
5.0pF
±0.25pF GRT1555C2A5R0CA02#
Tol.
Part Number
C03E.pdf
Nov. 22,2019
Specifications and Test Methods, Package, Chart of Characteristic Data,
please refer to the search web page.
https://www.murata.com/en-global/products/capacitor
Links are provided to the product detail pages on the web, and are shown
below in the product number table from the PDF version of the catalog
which is available on the web.
Status and Features Icons
The status and features of products can be checked at
once. When
is clicked, a description of each icon will
be displayed
Stock Check (Where to buy)
Reference inventory information from agents and
web-based companies.
Data Sheet
The product details page can be output in PDF.
How to read part numbers
Describes the meaning of the part number
Series Information
This links to the introduction page of each series.
Detailed Specifications Sheet
F Rated value
F Specifications and Test Methods
F Package
F Caution, Notice
(Storage, Soldering and Mounting, ....etc.)
Characteristics Data
The following characteristics data of the
main products can be acquired.
F SPICE Netlist (mod type)
F S parameter (S2P type)
F Reliability Test Data *Typical data
F Shape (Dimensions)
F Rated Values
F Specification by Packaging Code/
Minimum Order Quantity
F Weight (1 pc/ø180mm reel)
Chart of Characteristic Data
The main products published characteristic data.
F Frequency characteristics (ESR, Impedance)
F DC bias characteristics
F AC voltage characteristics
F Capacitance - temperature characteristics
F Calorific property by ripple current
Design Tools SimSurfing
The SimSurfing design tools are useful for displaying
the graph, downloading CSV data and overwriting the
product number graph.
28
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRT Series
Nov. 22,2019
AEC-Q200 Compliant Chip Multilayer Ceramic Capacitors for Infotainment
GCM Series
WEB
Features
This product has clearded test conditions meet AEC-Q200.
This series is designed for use in Car Multimedia, Car Interior, Car Comfort application and General Electronic
equipment. It is not appropriate for use in applications critical to passenger safety and car driving function (e.g. ABS,
AIRBAG, etc.). Please use the GCM series is in critical applications.
General Purpose GRM Series
Maximum operating temperature: 125°C
AEC-Q200 meeted GRT Series
Maximum operating temperature: 125°C
Test Method
Test Method
Items
Temperature Cycle: 1,000 cycles
Humidity Loading
Test temperature: 40±2°C
Test humidity: 90 to 95%RH
Test time: 500 hours
Test temperature: 85±2°C
Test humidity: 80 to 85%RH
Test time: 1,000 hours
GCD Series
Temperature Cycle: 5 cycles
GCE Series
Meet AEC-Q200 (Grade2 or Grade3).
105°C product: Grade2.
85°C product: Grade3.
Ni/Sn Plated Layer
Ceramic
KCM Series
Foundation Electrode Layer
Specifications
Size
Rated Voltage
Capacitance
Main Applications
0.6×0.3mm to 3.2×2.5mm
e
g
e
2.5Vdc to 100Vdc
T
0.50pF to 100µF
Such as Information and Comfort equipment, car navigation, communication
module and entertainment system
L
W
KC3 Series
Internal Electrodes
NMF Series
Sn plating is applied to the external electrodes; excellent solderability.
KCA Series
3
GCG Series
2
Temperature Cycle
!Caution
/Notice
1
GCJ Series
GC3 Series
Capacitor meet AEC-Q200 (Grade2 or Grade3).
GCQ Series
GRT Series
29
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GRT Series Temperature Compensating Type
T
max.
0.6×0.3mm
T
max.
GCJ Series
GCQ Series
GCD Series
GCE Series
NMF Series
KCM Series
KC3 Series
KCA Series
GCG Series
!Caution/
Notice
30
±0.5pF GRT0335C1E7R0DA02#
±0.25pF GRT0335C2A2R0CA02#
8.0pF
±0.5pF GRT0335C1E8R0DA02#
3.0pF
±0.25pF GRT0335C2A3R0CA02#
9.0pF
±0.5pF GRT0335C1E9R0DA02#
4.0pF
±0.25pF GRT0335C2A4R0CA02#
10pF
±5%
GRT0335C1E100JA02#
5.0pF
±0.25pF GRT0335C2A5R0CA02#
12pF
±5%
GRT0335C1E120JA02#
6.0pF
±0.5pF GRT0335C2A6R0DA02#
15pF
±5%
GRT0335C1E150JA02#
7.0pF
±0.5pF GRT0335C2A7R0DA02#
18pF
±5%
GRT0335C1E180JA02#
8.0pF
±0.5pF GRT0335C2A8R0DA02#
22pF
±5%
GRT0335C1E220JA02#
9.0pF
±0.5pF GRT0335C2A9R0DA02#
27pF
±5%
GRT0335C1E270JA02#
2.0pF
C0G
Part Number
±0.5pF GRT0335C1E6R0DA02#
±0.25pF GRT0335C2A1R0CA02#
25Vdc
Tol.
7.0pF
1.0pF
C0G
Cap.
6.0pF
0.33mm 100Vdc C0G
50Vdc
Rated
TC
Voltage Code
±0.25pF GRT0335C1E5R0CA02#
Cap.
Tol.
Part Number
C03E.pdf
Nov. 22,2019
Part Number List
5.0pF
Rated
TC
Voltage Code
GC3 Series
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
0.33mm 25Vdc
C0G
10pF
±5%
GRT0335C2A100JA02#
33pF
±5%
GRT0335C1E330JA02#
12pF
±5%
GRT0335C2A120JA02#
39pF
±5%
GRT0335C1E390JA02#
15pF
±5%
GRT0335C2A150JA02#
47pF
±5%
GRT0335C1E470JA02#
18pF
±5%
GRT0335C2A180JA02#
56pF
±5%
GRT0335C1E560JA02#
22pF
±5%
GRT0335C2A220JA02#
68pF
±5%
GRT0335C1E680JA02#
27pF
±5%
GRT0335C2A270JA02#
82pF
±5%
GRT0335C1E820JA02#
33pF
±5%
GRT0335C2A330JA02#
100pF
±5%
GRT0335C1E101JA02#
39pF
±5%
GRT0335C2A390JA02#
150pF
±5%
GRT0335C1E151JA02#
47pF
±5%
GRT0335C2A470JA02#
180pF
±5%
GRT0335C1E181JA02#
56pF
±5%
GRT0335C2A560JA02#
220pF
±5%
GRT0335C1E221JA02#
68pF
±5%
GRT0335C2A680JA02#
270pF
±5%
GRT0335C1E271JA02#
82pF
±5%
GRT0335C2A820JA02#
330pF
±5%
GRT0335C1E331JA02#
100pF
±5%
GRT0335C2A101JA02#
390pF
±5%
GRT0335C1E391JA02#
1.0pF
±0.25pF GRT0335C1H1R0CA02#
470pF
±5%
GRT0335C1E471JA02#
2.0pF
±0.25pF GRT0335C1H2R0CA02#
560pF
±5%
GRT0335C1E561JA02#
3.0pF
±0.25pF GRT0335C1H3R0CA02#
680pF
±5%
GRT0335C1E681JA02#
4.0pF
±0.25pF GRT0335C1H4R0CA02#
820pF
±5%
GRT0335C1E821JA02#
5.0pF
±0.25pF GRT0335C1H5R0CA02#
1000pF
±5%
GRT0335C1E102JA02#
6.0pF
±0.5pF GRT0335C1H6R0DA02#
7.0pF
±0.5pF GRT0335C1H7R0DA02#
8.0pF
±0.5pF GRT0335C1H8R0DA02#
9.0pF
±0.5pF GRT0335C1H9R0DA02#
Cap.
Tol.
1.0×0.5mm
T
max.
Rated
TC
Voltage Code
Part Number
10pF
±5%
GRT0335C1H100JA02#
12pF
±5%
GRT0335C1H120JA02#
1.0pF
±0.25pF GRT1555C2A1R0CA02#
15pF
±5%
GRT0335C1H150JA02#
2.0pF
±0.25pF GRT1555C2A2R0CA02#
18pF
±5%
GRT0335C1H180JA02#
3.0pF
±0.25pF GRT1555C2A3R0CA02#
22pF
±5%
GRT0335C1H220JA02#
4.0pF
±0.25pF GRT1555C2A4R0CA02#
27pF
±5%
GRT0335C1H270JA02#
5.0pF
±0.25pF GRT1555C2A5R0CA02#
33pF
±5%
GRT0335C1H330JA02#
6.0pF
±0.5pF GRT1555C2A6R0DA02#
39pF
±5%
GRT0335C1H390JA02#
7.0pF
±0.5pF GRT1555C2A7R0DA02#
47pF
±5%
GRT0335C1H470JA02#
8.0pF
±0.5pF GRT1555C2A8R0DA02#
56pF
±5%
GRT0335C1H560JA02#
9.0pF
±0.5pF GRT1555C2A9R0DA02#
68pF
±5%
GRT0335C1H680JA02#
10pF
±5%
GRT1555C2A100JA02#
82pF
±5%
GRT0335C1H820JA02#
12pF
±5%
GRT1555C2A120JA02#
100pF
±5%
GRT0335C1H101JA02#
15pF
±5%
GRT1555C2A150JA02#
120pF
±5%
GRT0335C1H121JA02#
18pF
±5%
GRT1555C2A180JA02#
150pF
±5%
GRT0335C1H151JA02#
22pF
±5%
GRT1555C2A220JA02#
180pF
±5%
GRT0335C1H181JA02#
27pF
±5%
GRT1555C2A270JA02#
220pF
±5%
GRT0335C1H221JA02#
33pF
±5%
GRT1555C2A330JA02#
1.0pF
±0.25pF GRT0335C1E1R0CA02#
39pF
±5%
GRT1555C2A390JA02#
2.0pF
±0.25pF GRT0335C1E2R0CA02#
47pF
±5%
GRT1555C2A470JA02#
3.0pF
±0.25pF GRT0335C1E3R0CA02#
56pF
±5%
GRT1555C2A560JA02#
4.0pF
±0.25pF GRT0335C1E4R0CA02#
68pF
±5%
GRT1555C2A680JA02#
0.55mm 100Vdc C0G
Part number # indicates the package specification code.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number List
(→ 1.0×0.5mm)
25Vdc
C0G
GRT1555C1E331JA02#
GRT1555C2A101JA02#
390pF
±5%
GRT1555C1E391JA02#
±0.25pF GRT1555C1H1R0CA02#
470pF
±5%
GRT1555C1E471JA02#
2.0pF
±0.25pF GRT1555C1H2R0CA02#
560pF
±5%
GRT1555C1E561JA02#
3.0pF
±0.25pF GRT1555C1H3R0CA02#
680pF
±5%
GRT1555C1E681JA02#
4.0pF
±0.25pF GRT1555C1H4R0CA02#
820pF
±5%
GRT1555C1E821JA02#
5.0pF
±0.25pF GRT1555C1H5R0CA02#
1000pF
±5%
GRT1555C1E102JA02#
6.0pF
±0.5pF GRT1555C1H6R0DA02#
7.0pF
±0.5pF GRT1555C1H7R0DA02#
8.0pF
±0.5pF GRT1555C1H8R0DA02#
9.0pF
±0.5pF GRT1555C1H9R0DA02#
Cap.
Tol.
1.6×0.8mm
T
max.
Rated
TC
Voltage Code
Part Number
10pF
±5%
GRT1555C1H100JA02#
12pF
±5%
GRT1555C1H120JA02#
120pF
±5%
GRT1885C2A121JA02#
15pF
±5%
GRT1555C1H150JA02#
150pF
±5%
GRT1885C2A151JA02#
18pF
±5%
GRT1555C1H180JA02#
180pF
±5%
GRT1885C2A181JA02#
22pF
±5%
GRT1555C1H220JA02#
220pF
±5%
GRT1885C2A221JA02#
27pF
±5%
GRT1555C1H270JA02#
270pF
±5%
GRT1885C2A271JA02#
33pF
±5%
GRT1555C1H330JA02#
330pF
±5%
GRT1885C2A331JA02#
39pF
±5%
GRT1555C1H390JA02#
390pF
±5%
GRT1885C2A391JA02#
47pF
±5%
GRT1555C1H470JA02#
470pF
±5%
GRT1885C2A471JA02#
56pF
±5%
GRT1555C1H560JA02#
560pF
±5%
GRT1885C2A561JA02#
68pF
±5%
GRT1555C1H680JA02#
680pF
±5%
GRT1885C2A681JA02#
0.9mm 100Vdc C0G
82pF
±5%
GRT1555C1H820JA02#
820pF
±5%
GRT1885C2A821JA02#
100pF
±5%
GRT1555C1H101JA02#
1000pF
±5%
GRT1885C2A102JA02#
120pF
±5%
GRT1555C1H121JA02#
1200pF
±5%
GRT1885C2A122JA02#
150pF
±5%
GRT1555C1H151JA02#
1500pF
±5%
GRT1885C2A152JA02#
180pF
±5%
GRT1555C1H181JA02#
C0G 1200pF
±5%
GRT1885C1H122JA02#
220pF
±5%
GRT1555C1H221JA02#
1500pF
±5%
GRT1885C1H152JA02#
270pF
±5%
GRT1555C1H271JA02#
1800pF
±5%
GRT1885C1H182JA02#
330pF
±5%
GRT1555C1H331JA02#
2200pF
±5%
GRT1885C1H222JA02#
390pF
±5%
GRT1555C1H391JA02#
2700pF
±5%
GRT1885C1H272JA02#
470pF
±5%
GRT1555C1H471JA02#
3300pF
±5%
GRT1885C1H332JA02#
560pF
±5%
GRT1555C1H561JA02#
3900pF
±5%
GRT1885C1H392JA02#
680pF
±5%
GRT1555C1H681JA02#
4700pF
±5%
GRT1885C1H472JA02#
820pF
±5%
GRT1555C1H821JA02#
5600pF
±5%
GRT1885C1H562JA02#
1000pF
±5%
GRT1555C1H102JA02#
6800pF
±5%
GRT1885C1H682JA02#
10pF
±5%
GRT1555C1E100JA02#
8200pF
±5%
GRT1885C1H822JA02#
12pF
±5%
GRT1555C1E120JA02#
10000pF
±5%
GRT1885C1H103JA02#
15pF
±5%
GRT1555C1E150JA02#
C0G 1200pF
±5%
GRT1885C1E122JA02#
18pF
±5%
GRT1555C1E180JA02#
1500pF
±5%
GRT1885C1E152JA02#
22pF
±5%
GRT1555C1E220JA02#
4700pF
±5%
GRT1885C1E472JA02#
27pF
±5%
GRT1555C1E270JA02#
5600pF
±5%
GRT1885C1E562JA02#
33pF
±5%
GRT1555C1E330JA02#
6800pF
±5%
GRT1885C1E682JA02#
39pF
±5%
GRT1555C1E390JA02#
8200pF
±5%
GRT1885C1E822JA02#
47pF
±5%
GRT1555C1E470JA02#
10000pF
±5%
GRT1885C1E103JA02#
56pF
±5%
GRT1555C1E560JA02#
68pF
±5%
GRT1555C1E680JA02#
82pF
±5%
GRT1555C1E820JA02#
100pF
±5%
GRT1555C1E101JA02#
120pF
±5%
GRT1555C1E121JA02#
T
max.
Cap.
Tol.
150pF
±5%
GRT1555C1E151JA02#
0.6mm
C0G 1800pF
±5%
GRT2165C1E182JA12#
180pF
±5%
GRT1555C1E181JA02#
2200pF
±5%
GRT2165C1E222JA12#
220pF
±5%
GRT1555C1E221JA02#
0.7mm 100Vdc C0G 1800pF
±5%
GRT2165C2A182JA02#
270pF
±5%
GRT1555C1E271JA02#
2200pF
±5%
GRT2165C2A222JA02#
50Vdc
25Vdc
2.0×1.25mm
Rated
TC
Voltage Code
25Vdc
Part Number
Part number # indicates the package specification code.
GCM Series
±5%
GC3 Series
330pF
GCJ Series
±5%
C0G
C0G
Part Number
1.0pF
100pF
50Vdc
0.55mm 25Vdc
Tol.
GCQ Series
GRT1555C2A820JA02#
Cap.
GCD Series
±5%
Rated
TC
Voltage Code
GCE Series
82pF
T
max.
NMF Series
0.55mm 100Vdc C0G
Part Number
KCM Series
Tol.
KC3 Series
Cap.
KCA Series
Rated
TC
Voltage Code
GCG Series
T
max.
!Caution
/Notice
GRT Series Temperature Compensating Type
C03E.pdf
Nov. 22,2019
GRT Series
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
31
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GRT Series Temperature Compensating Type
GCD Series
Part Number List
T
max.
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
0.7mm 100Vdc C0G 2700pF
±5%
GRT2165C2A272JA02#
3300pF
±5%
GRT2165C2A332JA02#
1.35mm 50Vdc
C0G 18000pF
±5%
GRT21B5C1H183JA02#
22000pF
±5%
GRT21B5C1H223JA02#
Cap.
Tol.
3.2×1.6mm
T
max.
Rated
TC
Voltage Code
Part Number
0.95mm 100Vdc C0G 3900pF
±5%
GRT3195C2A392JA02#
4700pF
±5%
GRT3195C2A472JA02#
5600pF
±5%
GRT3195C2A562JA02#
6800pF
±5%
GRT3195C2A682JA02#
8200pF
±5%
GRT3195C2A822JA02#
10000pF
±5%
GRT3195C2A103JA02#
18000pF
±5%
GRT3195C2A183JA02#
22000pF
±5%
GRT3195C2A223JA02#
0.10μF
±5%
GRT31C5C2A104JA12#
C0G 56000pF
±5%
GRT31C5C1H563JA02#
68000pF
±5%
GRT31C5C1H683JA02#
82000pF
±5%
GRT31C5C1H823JA02#
0.10μF
±5%
GRT31C5C1H104JA02#
1.8mm 100Vdc C0G
50Vdc
25Vdc
16Vdc
C0G
C0G
0.10μF
±5%
GRT31C5C1E104JA02#
0.12μF
±5%
GRT31C5C1E124JA02#
0.12μF
±5%
GRT31C5C1C124JA02#
!Caution/
Notice
GCG Series
KCA Series
KC3 Series
KCM Series
NMF Series
GCE Series
C03E.pdf
Nov. 22,2019
(→ 2.0×1.25mm)
GCQ Series
GCJ Series
GC3 Series
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
32
Part number # indicates the package specification code.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
16Vdc
150pF
±10% GRT033R71E151KE01#
15000pF ±10% GRT033C80J153KE01#
470pF
±10% GRT033R71E471KE01#
22000pF ±10% GRT033C80J223KE01#
1000pF
±10% GRT033R71E102KE01#
33000pF ±10% GRT033C80J333KE01#
150pF
±10% GRT033C81E151KE01#
47000pF ±10% GRT033C80J473KE01#
470pF
±10% GRT033C81E471KE01#
68000pF ±10% GRT033C80J683KE01#
1000pF
±10% GRT033C81E102KE01#
0.10μF
±10% GRT033C80J104KE01#
0.10μF
±10% GRT033C81E104KE01#
0.22μF
±10% GRT033C80J224KE01#
100pF
±10% GRT033R61E101KE01#
X5R 10000pF ±10% GRT033R60J103KE01#
150pF
±10% GRT033R61E151KE01#
15000pF ±10% GRT033R60J153KE01#
220pF
±10% GRT033R61E221KE01#
22000pF ±10% GRT033R60J223KE01#
330pF
±10% GRT033R61E331KE01#
33000pF ±10% GRT033R60J333KE01#
470pF
±10% GRT033R61E471KE01#
47000pF ±10% GRT033R60J473KE01#
680pF
±10% GRT033R61E681KE01#
68000pF ±10% GRT033R60J683KE01#
1000pF
±10% GRT033R61E102KE01#
0.10μF
±10% GRT033R60J104KE01#
4700pF
±10% GRT033R61E472KE01#
0.22μF
±10% GRT033R60J224KE01#
6800pF
±10% GRT033R61E682KE01#
0.33μF
±20% GRT033R60J334ME01#
10000pF ±10% GRT033R61E103KE01#
0.47μF
±10% GRT033R60J474KE01#
0.10μF
±10% GRT033R61E104KE01#
X7S
0.10μF
±10% GRT033C71C104KE01#
X6S
0.10μF
±10% GRT033C81C104KE01#
4Vdc
0.35mm 6.3Vdc
15000pF ±10% GRT033R61C153KE01#
4Vdc
X6S 68000pF ±10% GRT033C80G683KE01#
±10% GRT033C80G104KE01#
0.22μF
±20% GRT033C80G224ME01#
X5R
1.0μF
±20% GRT033R60J105ME13#
X5R
1.0μF
±20% GRT033R60G105ME13#
22000pF ±10% GRT033R61C223KE01#
0.39mm 10Vdc
X6S
1.0μF
±20% GRT033C81A105ME13#
33000pF ±10% GRT033R61C333KE01#
6.3Vdc
X7T
1.0μF
±20% GRT033D70J105ME13#
X6S
1.0μF
±20% GRT033C80J105ME13#
2.5Vdc
X7T
1.0μF
±20% GRT033D70E105ME18#
Rated
TC
Voltage Code
Cap.
47000pF ±10% GRT033R61C473KE01#
68000pF ±10% GRT033R61C683KE01#
0.10μF
±10% GRT033R61C104KE01#
X7R 10000pF ±10% GRT033R71A103KE01#
X7S
0.10μF
X6S
±10% GRT033C71A104KE01#
1.0×0.5mm
0.10μF
±10% GRT033C81A104KE01#
X5R 1500pF
±10% GRT033R61A152KE01#
2200pF
±10% GRT033R61A222KE01#
220pF
±10% GRT155R71H221KE01#
3300pF
±10% GRT033R61A332KE01#
330pF
±10% GRT155R71H331KE01#
4700pF
±10% GRT033R61A472KE01#
470pF
±10% GRT155R71H471KE01#
6800pF
±10% GRT033R61A682KE01#
680pF
±10% GRT155R71H681KE01#
10000pF ±10% GRT033R61A103KE01#
1000pF
±10% GRT155R71H102KE01#
15000pF ±10% GRT033R61A153KE01#
1500pF
±10% GRT155R71H152KE01#
22000pF ±10% GRT033R61A223KE01#
2200pF
±10% GRT155R71H222KE01#
33000pF ±10% GRT033R61A333KE01#
3300pF
±10% GRT155R71H332KE01#
47000pF ±10% GRT033R61A473KE01#
4700pF
±10% GRT155R71H472KE01#
6800pF
±10% GRT155R71H682KE01#
T
max.
0.55mm 50Vdc
X7R
68000pF ±10% GRT033R61A683KE01#
6.3Vdc
0.10μF
Tol.
Part Number
0.10μF
±10% GRT033R61A104KE01#
10000pF ±10% GRT155R71H103KE01#
0.22μF
±10% GRT033R61A224KE01#
15000pF ±10% GRT155R71H153KE01#
X7R 2200pF
±10% GRT033R70J222KE01#
22000pF ±10% GRT155R71H223KE01#
3300pF
±10% GRT033R70J332KE01#
33000pF ±10% GRT155R71H333KE01#
4700pF
±10% GRT033R70J472KE01#
47000pF ±10% GRT155R71H473KE01#
6800pF
±10% GRT033R70J682KE01#
68000pF ±10% GRT155R71H683KE01#
0.10μF
±10% GRT155R71H104KE01#
X6S
0.22μF
±10% GRT155C8YA224KE01#
X5R
0.22μF
±10% GRT155R6YA224KE01#
0.47μF
±10% GRT155R6YA474KE01#
10000pF ±10% GRT033R70J103KE01#
0.10μF
±10% GRT033C70J104KE01#
X6S 2200pF
±10% GRT033C80J222KE01#
3300pF
±10% GRT033C80J332KE01#
X7S
35Vdc
Part number # indicates the package specification code.
GCM Series
GC3 Series
±10% GRT033C80J682KE01#
10000pF ±10% GRT033C80J103KE01#
X5R 10000pF ±10% GRT033R61C103KE01#
10Vdc
6800pF
±10% GRT033R6YA104KE01#
GCJ Series
X5R
±10% GRT033C80J472KE01#
GCQ Series
X6S
X6S 4700pF
GCD Series
X7R
0.33mm 6.3Vdc
GCE Series
25Vdc
0.10μF
Part Number
NMF Series
X5R
Tol.
Part Number
KCM Series
0.33mm 35Vdc
Cap.
Tol.
KC3 Series
Rated
TC
Voltage Code
Cap.
KCA Series
T
max.
Rated
TC
Voltage Code
GCG Series
T
max.
0.6×0.3mm
Part Number List
!Caution
/Notice
GRT Series High Dielectric Constant Type
C03E.pdf
Nov. 22,2019
GRT Series
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GRT Series High Dielectric Constant Type
T
max.
Rated
TC
Voltage Code
0.55mm 25Vdc
Cap.
Tol.
Part Number
X7R 10000pF ±10% GRT155R71E103KE01#
T
max.
0.7mm
Rated
TC
Voltage Code
Cap.
16Vdc
X5R
2.2μF
±10% GRT155R61C225KE13#
10Vdc
X7S
2.2μF
±10% GRT155C71A225KE13#
X6S
2.2μF
±10% GRT155C81A225KE13#
33000pF ±10% GRT155R71E333KE01#
X6S
GCJ Series
X5R
16Vdc
X7S
2.2μF
±10% GRT155C70J225KE13#
0.10μF
±10% GRT155R71E104KE01#
2.5Vdc
X6S
10μF
±20% GRT155C80E106ME13#
0.22μF
±10% GRT155C81E224KE01#
Rated
TC
Voltage Code
Cap.
0.22μF
±10% GRT155R61E224KE01#
0.47μF
±10% GRT155R61E474KE01#
1.0μF
±10% GRT155R61E105KE01#
1.6×0.8mm
T
max.
0.9mm 100Vdc X7R 3300pF
GCD Series
GCQ Series
33000pF ±10% GRT155R71C333KE01#
GCE Series
NMF Series
KCM Series
6.3Vdc
KC3 Series
Part Number
±10% GRT188R72A332KE01#
10000pF ±10% GRT188R72A103KE01#
47000pF ±10% GRT155R71C473KE01#
50Vdc
X5R
1.0μF
±10% GRT188R61H105KE13#
68000pF ±10% GRT155R71C683KE01#
35Vdc
X6S
1.0μF
±10% GRT188C8YA105KE13#
X5R
2.2μF
±10% GRT188R6YA225KE13#
X7R
0.15μF
±10% GRT188R71E154KE01#
0.10μF
±10% GRT155R71C104KE01#
0.22μF
±10% GRT155R71C224KE01#
25Vdc
X6S
0.47μF
±10% GRT155C81C474KE01#
0.22μF
±10% GRT188R71E224KE01#
0.22μF
±10% GRT155R61C224KE01#
0.47μF
±10% GRT188R71E474KE13#
0.47μF
±10% GRT155R61C474KE01#
1.0μF
±10% GRT188R71E105KE13#
1.0μF
±10% GRT155R61C105KE01#
0.22μF
0.47μF
X7R
0.33μF
±10% GRT188R71C334KE01#
±10% GRT155R71A224KE01#
0.47μF
±10% GRT188R71C474KE01#
±10% GRT155R71A474KE01#
1.0μF
±10% GRT188R71C105KE13#
±20% GRT188R60J106ME13#
16Vdc
X7R
X6S
1.0μF
±10% GRT155C81A105KE01#
6.3Vdc
X5R
10μF
X5R
0.22μF
±10% GRT155R61A224KE01#
4Vdc
X6S
1.0μF
±20% GRT188C80G105ME01#
0.33μF
±10% GRT155R61A334KE01#
4.7μF
±10% GRT188C80G475KE01#
0.47μF
±10% GRT155R61A474KE01#
10μF
±20% GRT188C80G106ME13#
0.68μF
±10% GRT155R61A684KE01#
10μF
±20% GRT188R60G106ME13#
1.0μF
±10% GRT155R61A105KE01#
0.95mm 25Vdc
X5R
4.7μF
±10% GRT188R61E475KE13#
2.2μF
±10% GRT155R61A225KE01#
16Vdc
X6S
4.7μF
±10% GRT188C81C475KE13#
X5R
4.7μF
±10% GRT188R61C475KE13#
10μF
±10% GRT188R61C106KE13#
10μF
±10% GRT188R61A106KE13#
±20% GRT188R60E226ME13#
X5R
X7R 22000pF ±10% GRT155R70J223KE01#
X5R
1.0μF
±10% GRT155R70J105KE01#
0.22μF
±10% GRT155C80J224KE01#
0.33μF
±10% GRT155C80J334KE01#
0.47μF
±10% GRT155C80J474KE01#
0.68μF
±10% GRT155C80J684KE01#
1.0μF
±10% GRT155C80J105KE01#
2.2μF
±10% GRT155C80J225KE01#
0.22μF
±10% GRT155R60J224KE01#
0.33μF
±10% GRT155R60J334KE01#
X5R
10μF
±20% GRT188R61E106ME13#
0.47μF
±10% GRT155R60J474KE01#
16Vdc
X6S
10μF
±20% GRT188C81C106ME13#
0.68μF
±10% GRT155R60J684KE01#
10Vdc
X7T
10μF
±20% GRT188D71A106ME13#
1.0μF
±10% GRT155R60J105KE01#
X6S
10μF
±20% GRT188C81A106ME13#
2.2μF
±10% GRT155R60J225KE01#
X5R
22μF
±20% GRT188R61A226ME13#
X7T
10μF
±20% GRT188D70J106ME13#
X6S
10μF
±20% GRT188C80J106ME13#
22μF
±20% GRT188C80J226ME13#
4Vdc
X7R
1.0μF
±10% GRT155R70G105KE01#
35Vdc
X5R
1.0μF
±10% GRT155R6YA105KE13#
25Vdc
X6S
1.0μF
±10% GRT155C81E105KE13#
16Vdc
X6S
1.0μF
±10% GRT155C81C105KE13#
10Vdc
X7S
1.0μF
±10% GRT155C71A105KE13#
6.3Vdc
X5R
4.7μF
±20% GRT155R60J475ME13#
4Vdc
X5R
4.7μF
±20% GRT155R60G475ME13#
X5R
4.7μF
±20% GRT155R61A475ME13#
6.3Vdc
X6S
4.7μF
±20% GRT155C80J475ME13#
25Vdc
X5R
2.2μF
±10% GRT155R61E225KE13#
16Vdc
X6S
2.2μF
±10% GRT155C81C225KE13#
0.65mm 10Vdc
Tol.
X5R
X6S
0.6mm
Part Number
6.3Vdc
22000pF ±10% GRT155R71C223KE01#
10Vdc
Tol.
47000pF ±10% GRT155R71E473KE01#
X7R 10000pF ±10% GRT155R71C103KE01#
KCA Series
GCG Series
!Caution/
Notice
Part Number List
22000pF ±10% GRT155R71E223KE01#
0.7mm
34
C03E.pdf
Nov. 22,2019
(→ 1.0×0.5mm)
GC3 Series
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1.0mm
10Vdc
X5R
2.5Vdc
X5R
22μF
50Vdc
X5R
2.2μF
±10% GRT188R61H225KE13#
35Vdc
X6S
2.2μF
±10% GRT188C8YA225KE13#
25Vdc
6.3Vdc
X5R
4.7μF
±10% GRT188R6YA475KE13#
X6S
2.2μF
±10% GRT188C81E225KE13#
4.7μF
±10% GRT188C81E475KE13#
X5R
22μF
±20% GRT188R60J226ME13#
X6S
22μF
±20% GRT188C80G226ME13#
Rated
TC
Voltage Code
Cap.
4Vdc
2.0×1.25mm
T
max.
0.95mm 16Vdc
X5R
3.3μF
Tol.
Part Number
±10% GRT219R61C335KE01#
Part number # indicates the package specification code.
(→ 2.0×1.25mm)
Rated
TC
Voltage Code
0.95mm 10Vdc
X6S
Cap.
4.7μF
Tol.
Part Number
±10% GRT219C81A475KE01#
1.35mm 100Vdc X7R 47000pF ±10% GRT21BR72A473KE01#
50Vdc
T
max.
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
0.47μF
±10% GRT21BR71H474KE01#
1.5mm
25Vdc
X5R
6.8μF
±10% GRT32NR61E685KE01#
1.0μF
±10% GRT21BR71H105KE01#
2.2mm
50Vdc
X6S
3.3μF
±10% GRT32DC81H335KE01#
X5R
3.3μF
±10% GRT32DR61H335KE01#
6.3Vdc
X5R
33μF
±20% GRT32DR60J336ME01#
50Vdc
X7R
4.7μF
±10% GRT32ER71H475KE01#
X6S
4.7μF
±10% GRT32EC81H475KE01#
X6S
47μF
±10% GRT32EC81C476KE13#
16Vdc
X7R
2.2μF
±10% GRT21BR71C225KE01#
50Vdc
X5R
4.7μF
±10% GRT21BR61H475KE13#
X6S
4.7μF
±10% GRT21BC8YA475KE13#
25Vdc
X7R
2.2μF
±10% GRT21BR71E225KE13#
X6S
3.3μF
±10% GRT21BC81E335KE13#
X7R
4.7μF
±10% GRT21BR71C475KE13#
10Vdc
X6S
47μF
±10% GRT32EC81A476KE13#
X6S
3.3μF
±10% GRT21BC81C335KE13#
6.3Vdc
X7R
47μF
±10% GRT32ER70J476KE13#
X7R
4.7μF
±10% GRT21BR71A475KE13#
X7S
100μF
±20% GRT32EC70J107ME13#
X5R
3.3μF
±10% GRT21BR61A335KE13#
X5R
100μF
±20% GRT32ER60J107ME13#
X5R
3.3μF
±10% GRT21BR60J335KE13#
16Vdc
10Vdc
6.3Vdc
1.45mm 50Vdc
X7S
4.7μF
±10% GRT21BC71H475KE13#
25Vdc
X7S
4.7μF
±10% GRT21BC71E475KE13#
10μF
±10% GRT21BC71E106KE13#
16Vdc
10Vdc
22μF
±20% GRT21BR61E226ME13#
X7S
10μF
±10% GRT21BC71C106KE13#
X5R
22μF
±20% GRT21BR61C226ME13#
X7T
22μF
±20% GRT21BD71A226ME13#
X6S
22μF
±20% GRT21BC81A226ME13#
±20% GRT21BD70J226ME13#
X7T
22μF
X5R
47μF
±20% GRT21BR60J476ME13#
X6S
47μF
±20% GRT21BC80G476ME13#
X5R
47μF
±20% GRT21BR60G476ME13#
Rated
TC
Voltage Code
Cap.
4Vdc
16Vdc
NMF Series
6.3Vdc
X5R
2.7mm
GCQ Series
35Vdc
GCD Series
1.4mm
X7R
3.2×2.5mm
GCE Series
T
max.
3.2×1.6mm
±10% GRT31MC81H105KE01#
±10% GRT31MC81E155KE01#
X6S
1.5μF
X5R
1.5μF
±10% GRT31MR61E155KE01#
X6S
1.5μF
±10% GRT31MC81C155KE01#
6.8μF
±10% GRT31MC81C685KE01#
1.5μF
±10% GRT31MR61C155KE01#
6.8μF
±10% GRT31MR61C685KE01#
X7R
2.2μF
±10% GRT31CR71H225KE13#
X6S
1.5μF
±10% GRT31CC81H155KE01#
2.2μF
±10% GRT31CC81H225KE01#
X5R
1.8mm
50Vdc
X5R
35Vdc
25Vdc
1.5μF
±10% GRT31CR61H155KE01#
10μF
±10% GRT31CR61H106KE01#
±10% GRT31CC8YA106KE01#
X6S
10μF
X5R
10μF
±10% GRT31CR6YA106KE01#
X6S
10μF
±10% GRT31CC81E106KE01#
X5R
3.3μF
±10% GRT31CR61E335KE01#
16Vdc
X6S
22μF
±10% GRT31CC81C226KE01#
10Vdc
X5R
47μF
±10% GRT31CR61A476KE13#
6.3Vdc
X6S
47μF
±10% GRT31CC80J476KE13#
X5R
15μF
±10% GRT31CR60J156KE01#
KCM Series
1.0μF
KC3 Series
16Vdc
X6S
KCA Series
25Vdc
Part Number
GCG Series
1.25mm 50Vdc
Tol.
!Caution
/Notice
T
max.
GRT Series
Part Number List
GCM Series
GRT Series High Dielectric Constant Type
C03E.pdf
Nov. 22,2019
GC3 Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GCJ Series
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Part number # indicates the package specification code.
35
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GCM Series
1
GCQ Series
GCD Series
GCE Series
KC3 Series
KCA Series
GCG Series
General Purpose GRM Series
Maximum operating temperature: 125°C
GCM Series for Automotive
Maximum operating temperature: 150°C
Test Method
Test Method
Items
2
Temperature Cycle
Temperature Cycle: 5 cycles
Temperature Cycle: 100 cycles
(1,000 cycles for AEC-Q200 conforming products)
Humidity Loading
Test temperature: 40±2°C
Test humidity: 90 to 95%RH
Test time: 500 hours
Test temperature: 85±2°C
Test humidity: 80 to 85%RH
Test time: 500 hours
(1,000 hours for AEC-Q200 conforming products)
Can be used at 125°C and 150°C temperatures.
We also offer a lineup for 150°C that can be used in the engine room.
3
Sn plating is applied to the external electrodes; excellent solderability.
Internal Electrodes
Ni/Sn Plated Layer
Ceramic
Foundation Electrode Layer
KCM Series
NMF Series
Ideal for powertrains and safety devices in automotive.
This product can be used for safety devices, such as the drive system control for engine ECU, air bags, and ABS.
This product has cleared test conditions more severe than that of general products (GRM Series) even in
temperature cycle and humidity load tests.
GCJ Series
GC3 Series
Features
Specifications
Rated Voltage
Capacitance
Main Applications
!Caution/
Notice
WEB
Capacitor for automotive applications such as power train and safety equipment.
Size
36
Nov. 22,2019
Chip Multilayer Ceramic Capacitors for Automotive
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
0.6×0.3mm to 5.7×5.0mm
e
g
e
4Vdc to 1000Vdc
T
0.10pF to 47µF
Safety equipment, such as drive system control, air bags, and ABS of engine ECU
L
W
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Rated
TC
Voltage Code
0.55mm 50Vdc
C0G
±0.5pF GCM1555C1H6R0DA16#
2.0pF
±0.25pF GCM0335C1H2R0CA16#
7.0pF
±0.5pF GCM1555C1H7R0DA16#
3.0pF
±0.25pF GCM0335C1H3R0CA16#
8.0pF
±0.5pF GCM1555C1H8R0DA16#
4.0pF
±0.25pF GCM0335C1H4R0CA16#
9.0pF
±0.5pF GCM1555C1H9R0DA16#
5.0pF
±0.25pF GCM0335C1H5R0CA16#
10pF
±5%
GCM1555C1H100JA16#
6.0pF
±0.5pF GCM0335C1H6R0DA16#
12pF
±5%
GCM1555C1H120JA16#
7.0pF
±0.5pF GCM0335C1H7R0DA16#
15pF
±5%
GCM1555C1H150JA16#
8.0pF
±0.5pF GCM0335C1H8R0DA16#
18pF
±5%
GCM1555C1H180JA16#
9.0pF
±0.5pF GCM0335C1H9R0DA16#
22pF
±5%
GCM1555C1H220JA16#
10pF
±5%
GCM0335C1H100JA16#
27pF
±5%
GCM1555C1H270JA16#
12pF
±5%
GCM0335C1H120JA16#
33pF
±5%
GCM1555C1H330JA16#
15pF
±5%
GCM0335C1H150JA16#
39pF
±5%
GCM1555C1H390JA16#
18pF
±5%
GCM0335C1H180JA16#
47pF
±5%
GCM1555C1H470JA16#
22pF
±5%
GCM0335C1H220JA16#
56pF
±5%
GCM1555C1H560JA16#
27pF
±5%
GCM0335C1H270JA16#
68pF
±5%
GCM1555C1H680JA16#
33pF
±5%
GCM0335C1H330JA16#
82pF
±5%
GCM1555C1H820JA16#
39pF
±5%
GCM0335C1H390JA16#
100pF
±5%
GCM1555C1H101JA16#
47pF
±5%
GCM0335C1H470JA16#
120pF
±5%
GCM1555C1H121JA16#
56pF
±5%
GCM0335C1H560JA16#
150pF
±5%
GCM1555C1H151JA16#
68pF
±5%
GCM0335C1H680JA16#
180pF
±5%
GCM1555C1H181JA16#
82pF
±5%
GCM0335C1H820JA16#
220pF
±5%
GCM1555C1H221JA16#
100pF
±5%
GCM0335C1H101JA16#
270pF
±5%
GCM1555C1H271JA16#
1.0pF
±0.25pF GCM0335C1E1R0CA16#
330pF
±5%
GCM1555C1H331JA16#
2.0pF
±0.25pF GCM0335C1E2R0CA16#
390pF
±5%
GCM1555C1H391JA16#
3.0pF
±0.25pF GCM0335C1E3R0CA16#
470pF
±5%
GCM1555C1H471JA16#
4.0pF
±0.25pF GCM0335C1E4R0CA16#
560pF
±5%
GCM1555C1H561JA16#
5.0pF
±0.25pF GCM0335C1E5R0CA16#
680pF
±5%
GCM1555C1H681JA16#
6.0pF
±0.5pF GCM0335C1E6R0DA16#
820pF
±5%
GCM1555C1H821JA16#
7.0pF
±0.5pF GCM0335C1E7R0DA16#
1000pF
±5%
GCM1555C1H102JA16#
8.0pF
±0.5pF GCM0335C1E8R0DA16#
9.0pF
1.0pF
±0.25pF GCM1555G1H1R0CA16#
±0.5pF GCM0335C1E9R0DA16#
X8G
2.0pF
±0.25pF GCM1555G1H2R0CA16#
10pF
±5%
GCM0335C1E100JA16#
3.0pF
±0.25pF GCM1555G1H3R0CA16#
12pF
±5%
GCM0335C1E120JA16#
4.0pF
±0.25pF GCM1555G1H4R0CA16#
15pF
±5%
GCM0335C1E150JA16#
5.0pF
±0.25pF GCM1555G1H5R0CA16#
18pF
±5%
GCM0335C1E180JA16#
12pF
±5%
GCM1555G1H120JA16#
22pF
±5%
GCM0335C1E220JA16#
15pF
±5%
GCM1555G1H150JA16#
27pF
±5%
GCM0335C1E270JA16#
18pF
±5%
GCM1555G1H180JA16#
33pF
±5%
GCM0335C1E330JA16#
22pF
±5%
GCM1555G1H220JA16#
39pF
±5%
GCM0335C1E390JA16#
27pF
±5%
GCM1555G1H270JA16#
47pF
±5%
GCM0335C1E470JA16#
33pF
±5%
GCM1555G1H330JA16#
56pF
±5%
GCM0335C1E560JA16#
39pF
±5%
GCM1555G1H390JA16#
68pF
±5%
GCM0335C1E680JA16#
47pF
±5%
GCM1555G1H470JA16#
82pF
±5%
GCM0335C1E820JA16#
56pF
±5%
GCM1555G1H560JA16#
100pF
±5%
GCM0335C1E101JA16#
68pF
±5%
GCM1555G1H680JA16#
82pF
±5%
GCM1555G1H820JA16#
100pF
±5%
GCM1555G1H101JA16#
120pF
±5%
GCM1555G1H121JA16#
150pF
±5%
GCM1555G1H151JA16#
180pF
±5%
GCM1555G1H181JA16#
Cap.
Tol.
Part Number
1.0pF
±0.25pF GCM1555C1H1R0CA16#
220pF
±5%
GCM1555G1H221JA16#
2.0pF
±0.25pF GCM1555C1H2R0CA16#
270pF
±5%
GCM1555G1H271JA16#
3.0pF
±0.25pF GCM1555C1H3R0CA16#
330pF
±5%
GCM1555G1H331JA16#
Part number # indicates the package specification code.
GCM Series
±0.25pF GCM1555C1H5R0CA16#
6.0pF
GC3 Series
5.0pF
±0.25pF GCM0335C1H1R0CA16#
GCJ Series
±0.25pF GCM1555C1H4R0CA16#
GCQ Series
4.0pF
GCD Series
C0G
1.0pF
1.0×0.5mm
T
max.
0.55mm 50Vdc
GCE Series
C0G
Part Number
NMF Series
25Vdc
C0G
Tol.
Part Number
KCM Series
0.33mm 50Vdc
Cap.
Tol.
KC3 Series
Rated
TC
Voltage Code
Cap.
KCA Series
T
max.
Rated
TC
Voltage Code
GCG Series
T
max.
0.6×0.3mm
Part Number List
!Caution
/Notice
GCM Series Temperature Compensating Type
C03E.pdf
Nov. 22,2019
GRT Series
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
37
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GCM Series Temperature Compensating Type
GCJ Series
GCQ Series
GCD Series
GCE Series
NMF Series
KCM Series
KC3 Series
KCA Series
GCG Series
!Caution/
Notice
38
C03E.pdf
Nov. 22,2019
Part Number List
(→ 1.0×0.5mm)
T
max.
Rated
TC
Voltage Code
0.55mm 50Vdc
X8G
GC3 Series
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Cap.
Tol.
Part Number
390pF
±5%
GCM1555G1H391JA16#
470pF
±5%
560pF
±5%
680pF
T
max.
Rated
TC
Voltage Code
Tol.
Part Number
0.9mm 100Vdc U2J 3900pF
±5%
GCM1887U2A392JA16#
GCM1555G1H471JA16#
4700pF
±5%
GCM1887U2A472JA16#
GCM1555G1H561JA16#
5600pF
±5%
GCM1887U2A562JA16#
±5%
GCM1555G1H681JA16#
6800pF
±5%
GCM1887U2A682JA16#
820pF
±5%
GCM1555G1H821JA16#
8200pF
±5%
GCM1887U2A822JA16#
1000pF
±5%
GCM1555G1H102JA16#
10000pF
±5%
GCM1887U2A103JA16#
C0G 1800pF
±5%
GCM1885C1K182JA16#
2200pF
±5%
GCM1885C1K222JA16#
2700pF
±5%
GCM1885C1K272JA16#
3900pF
±5%
GCM1885C1K392JA16#
C0G 1200pF
±5%
GCM1885C1H122JA16#
80Vdc
1.6×0.8mm
T
max.
Rated
TC
Voltage Code
0.9mm 100Vdc C0G
Cap.
Tol.
Part Number
50Vdc
Cap.
1.0pF
±0.25pF GCM1885C2A1R0CA16#
1500pF
±5%
GCM1885C1H152JA16#
2.0pF
±0.25pF GCM1885C2A2R0CA16#
1800pF
±5%
GCM1885C1H182JA16#
3.0pF
±0.25pF GCM1885C2A3R0CA16#
2200pF
±5%
GCM1885C1H222JA16#
4.0pF
±0.25pF GCM1885C2A4R0CA16#
2700pF
±5%
GCM1885C1H272JA16#
5.0pF
±0.25pF GCM1885C2A5R0CA16#
3300pF
±5%
GCM1885C1H332JA16#
6.0pF
±0.5pF GCM1885C2A6R0DA16#
3900pF
±5%
GCM1885C1H392JA16#
7.0pF
±0.5pF GCM1885C2A7R0DA16#
4700pF
±5%
GCM1885C1H472JA16#
8.0pF
±0.5pF GCM1885C2A8R0DA16#
5600pF
±5%
GCM1885C1H562JA16#
9.0pF
±0.5pF GCM1885C2A9R0DA16#
6800pF
±5%
GCM1885C1H682JA16#
10pF
±5%
GCM1885C2A100JA16#
8200pF
±5%
GCM1885C1H822JA16#
12pF
±5%
GCM1885C2A120JA16#
10000pF
±5%
GCM1885C1H103JA16#
15pF
±5%
GCM1885C2A150JA16#
U2J 1000pF
±5%
GCM1887U1H102JA16#
18pF
±5%
GCM1885C2A180JA16#
1200pF
±5%
GCM1887U1H122JA16#
22pF
±5%
GCM1885C2A220JA16#
1500pF
±5%
GCM1887U1H152JA16#
27pF
±5%
GCM1885C2A270JA16#
1800pF
±5%
GCM1887U1H182JA16#
33pF
±5%
GCM1885C2A330JA16#
2200pF
±5%
GCM1887U1H222JA16#
39pF
±5%
GCM1885C2A390JA16#
2700pF
±5%
GCM1887U1H272JA16#
47pF
±5%
GCM1885C2A470JA16#
3300pF
±5%
GCM1887U1H332JA16#
56pF
±5%
GCM1885C2A560JA16#
3900pF
±5%
GCM1887U1H392JA16#
68pF
±5%
GCM1885C2A680JA16#
4700pF
±5%
GCM1887U1H472JA16#
82pF
±5%
GCM1885C2A820JA16#
5600pF
±5%
GCM1887U1H562JA16#
100pF
±5%
GCM1885C2A101JA16#
6800pF
±5%
GCM1887U1H682JA16#
120pF
±5%
GCM1885C2A121JA16#
8200pF
±5%
GCM1887U1H822JA16#
150pF
±5%
GCM1885C2A151JA16#
10000pF
±5%
GCM1887U1H103JA16#
180pF
±5%
GCM1885C2A181JA16#
220pF
±5%
GCM1885C2A221JA16#
270pF
±5%
GCM1885C2A271JA16#
330pF
±5%
GCM1885C2A331JA16#
390pF
±5%
GCM1885C2A391JA16#
Cap.
Tol.
Part Number
470pF
±5%
GCM1885C2A471JA16#
0.7mm 100Vdc C0G 1800pF
±5%
GCM2165C2A182JA16#
560pF
±5%
GCM1885C2A561JA16#
2200pF
±5%
GCM2165C2A222JA16#
680pF
±5%
GCM1885C2A681JA16#
2700pF
±5%
GCM2165C2A272JA16#
3300pF
±5%
GCM2165C2A332JA16#
C0G 4700pF
±5%
GCM2165C1K472JA16#
820pF
±5%
GCM1885C2A821JA16#
1000pF
±5%
GCM1885C2A102JA16#
1200pF
±5%
GCM1885C2A122JA16#
1500pF
±5%
GCM1885C2A152JA16#
U2J 1000pF
±5%
GCM1887U2A102JA16#
1200pF
±5%
GCM1887U2A122JA16#
1500pF
±5%
GCM1887U2A152JA16#
1800pF
±5%
GCM1887U2A182JA16#
2200pF
±5%
GCM1887U2A222JA16#
2700pF
±5%
GCM1887U2A272JA16#
3300pF
±5%
GCM1887U2A332JA16#
2.0×1.25mm
T
max.
Rated
TC
Voltage Code
80Vdc
0.95mm 100Vdc ZLM 1000pF
±10% GCM2199E2A102KA05#
1100pF
±10% GCM2199E2A112KA05#
1200pF
±10% GCM2199E2A122KA05#
1300pF
±10% GCM2199E2A132KA05#
1500pF
±10% GCM2199E2A152KA05#
±20% GCM2199E2A102MA05#
±20% GCM2199E2A112MA05#
±20% GCM2199E2A122MA05#
±20% GCM2199E2A132MA05#
Part number # indicates the package specification code.
1.45mm 250Vdc C0G 10000pF
Tol.
Part Number
±5%
GCM21B5C2E103JX0A#
±5%
GCM2195C1K682JA16#
U2J 3300pF
±5%
GCM21B7U2E332JX03#
8200pF
±5%
GCM2195C1K822JA16#
4700pF
±5%
GCM21B7U2E472JX03#
10000pF
±5%
GCM2195C1K103JA16#
12000pF
±5%
GCM2195C1K123JA16#
15000pF
±5%
GCM2195C1K153JA16#
C0G 12000pF
±5%
GCM2195C1H123JA16#
15000pF
±5%
GCM2195C1H153JA16#
Cap.
Tol.
Part Number
3.2×1.6mm
T
max.
Rated
TC
Voltage Code
10pF
±5%
GCM21A5C2J100JX01#
0.95mm 100Vdc C0G 3900pF
±5%
GCM3195C2A392JA16#
15pF
±5%
GCM21A5C2J150JX01#
4700pF
±5%
GCM3195C2A472JA16#
22pF
±5%
GCM21A5C2J220JX01#
5600pF
±5%
GCM3195C2A562JA16#
33pF
±5%
GCM21A5C2J330JX01#
6800pF
±5%
GCM3195C2A682JA16#
47pF
±5%
GCM21A5C2J470JX01#
8200pF
±5%
GCM3195C2A822JA16#
68pF
±5%
GCM21A5C2J680JX01#
10000pF
±5%
GCM3195C2A103JA16#
100pF
±5%
GCM21A5C2J101JX01#
C0G 27000pF
±5%
GCM3195C1K273JA16#
150pF
±5%
GCM21A5C2J151JX01#
33000pF
±5%
GCM3195C1K333JA16#
220pF
±5%
GCM21A5C2J221JX01#
10pF
±5%
GCM31A5C3A100JX01#
330pF
±5%
GCM21A5C2J331JX01#
15pF
±5%
GCM31A5C3A150JX01#
470pF
±5%
GCM21A5C2J471JX01#
22pF
±5%
GCM31A5C3A220JX01#
10pF
±5%
GCM21A5C2E100JX01#
33pF
±5%
GCM31A5C3A330JX01#
15pF
±5%
GCM21A5C2E150JX01#
47pF
±5%
GCM31A5C3A470JX01#
22pF
±5%
GCM21A5C2E220JX01#
68pF
±5%
GCM31A5C3A680JX01#
33pF
±5%
GCM21A5C2E330JX01#
100pF
±5%
GCM31A5C3A101JX01#
47pF
±5%
GCM21A5C2E470JX01#
150pF
±5%
GCM31A5C3A151JX01#
68pF
±5%
GCM21A5C2E680JX01#
220pF
±5%
GCM31A5C3A221JX01#
100pF
±5%
GCM21A5C2E101JX01#
330pF
±5%
GCM31A5C3A331JX01#
150pF
±5%
GCM21A5C2E151JX01#
470pF
±5%
GCM31A5C3A471JX01#
220pF
±5%
GCM21A5C2E221JX01#
10pF
±5%
GCM31A7U3A100JX01#
330pF
±5%
GCM21A5C2E331JX01#
15pF
±5%
GCM31A7U3A150JX01#
470pF
±5%
GCM21A5C2E471JX01#
22pF
±5%
GCM31A7U3A220JX01#
680pF
±5%
GCM21A5C2E681JX01#
33pF
±5%
GCM31A7U3A330JX01#
1000pF
±5%
GCM21A5C2E102JX01#
47pF
±5%
GCM31A7U3A470JX01#
1500pF
±5%
GCM21A5C2E152JX01#
68pF
±5%
GCM31A7U3A680JX01#
2200pF
±5%
GCM21A5C2E222JX01#
100pF
±5%
GCM31A7U3A101JX01#
100pF
±5%
GCM21A7U2E101JX01#
150pF
±5%
GCM31A7U3A151JX01#
150pF
±5%
GCM21A7U2E151JX01#
220pF
±5%
GCM31A7U3A221JX01#
220pF
±5%
GCM21A7U2E221JX01#
330pF
±5%
GCM31A7U3A331JX01#
330pF
±5%
GCM21A7U2E331JX01#
10pF
±5%
GCM31A5C2J100JX01#
470pF
±5%
GCM21A7U2E471JX01#
15pF
±5%
GCM31A5C2J150JX01#
680pF
±5%
GCM21A7U2E681JX01#
22pF
±5%
GCM31A5C2J220JX01#
1000pF
±5%
GCM21A7U2E102JX01#
33pF
±5%
GCM31A5C2J330JX01#
1500pF
±5%
GCM21A7U2E152JX01#
47pF
±5%
GCM31A5C2J470JX01#
2200pF
±5%
GCM21A7U2E222JX01#
68pF
±5%
GCM31A5C2J680JX01#
C0G 18000pF
±5%
GCM21B5C1K183JA16#
100pF
±5%
GCM31A5C2J101JX01#
22000pF
±5%
GCM21B5C1K223JA16#
150pF
±5%
GCM31A5C2J151JX01#
C0G 18000pF
±5%
GCM21B5C1H183JA16#
220pF
±5%
GCM31A5C2J221JX01#
22000pF
±5%
GCM21B5C1H223JA16#
330pF
±5%
GCM31A5C2J331JX01#
680pF
±5%
GCM21B5C2J681JX03#
470pF
±5%
GCM31A5C2J471JX01#
1000pF
±5%
GCM21B5C2J102JX03#
680pF
±5%
GCM31A5C2J681JX01#
1500pF
±5%
GCM21B5C2J152JX0A#
1000pF
±5%
GCM31A5C2J102JX01#
2200pF
±5%
GCM21B5C2J222JX0A#
1500pF
±5%
GCM31A5C2J152JX01#
250Vdc C0G 3300pF
±5%
GCM21B5C2E332JX01#
10pF
±5%
GCM31A7U2J100JX01#
4700pF
±5%
GCM21B5C2E472JX01#
15pF
±5%
GCM31A7U2J150JX01#
6800pF
±5%
GCM21B5C2E682JX0A#
22pF
±5%
GCM31A7U2J220JX01#
250Vdc C0G
U2J
80Vdc
50Vdc
1.45mm 630Vdc C0G
80Vdc
1.0mm 1000Vdc C0G
U2J
630Vdc C0G
U2J
Part number # indicates the package specification code.
GRT Series
GCM Series
Cap.
C0G 6800pF
1.0mm 630Vdc C0G
1.4mm
Rated
TC
Voltage Code
GC3 Series
50Vdc
±20% GCM2199E2A152MA05#
T
max.
GCJ Series
80Vdc
Part Number
GCQ Series
0.95mm 100Vdc ZLM 1500pF
Tol.
GCD Series
Cap.
GCE Series
Rated
TC
Voltage Code
NMF Series
T
max.
KCM Series
(→ 2.0×1.25mm)
KC3 Series
Part Number List
KCA Series
GCM Series Temperature Compensating Type
C03E.pdf
Nov. 22,2019
GCG Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
/Notice
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
39
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GCM Series Temperature Compensating Type
T
max.
Rated
TC
Voltage Code
Cap.
Tol.
1.0mm 630Vdc U2J
33pF
±5%
GCM31A7U2J330JX01#
47pF
±5%
GCM31A7U2J470JX01#
Part Number List
GCJ Series
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
±5%
GCM31A7U2J680JX01#
1.5mm 1000Vdc U2J 6800pF
±5%
GCM55Q7U3A682JX01#
±5%
GCM31A7U2J101JX01#
2.0mm 1000Vdc U2J 10000pF
±5%
GCM55D7U3A103JX01#
150pF
±5%
GCM31A7U2J151JX01#
630Vdc U2J 33000pF
±5%
GCM55D7U2J333JX01#
220pF
±5%
GCM31A7U2J221JX01#
47000pF
±5%
GCM55D7U2J473JX01#
330pF
±5%
GCM31A7U2J331JX01#
470pF
±5%
GCM31A7U2J471JX01#
680pF
±5%
GCM31A7U2J681JX01#
1000pF
±5%
GCM31A7U2J102JX01#
1500pF
±5%
GCM31A7U2J152JX01#
±5%
GCM31A7U2J222JX01#
±5%
GCM31B5C3A681JX01#
U2J
470pF
±5%
GCM31B7U3A471JX01#
680pF
±5%
GCM31B7U3A681JX01#
630Vdc C0G 2200pF
±5%
GCM31B5C2J222JX01#
U2J 3300pF
±5%
GCM31B7U2J332JX01#
GCQ Series
T
max.
68pF
680pF
±5%
GCM31B7U2E682JX01#
±5%
GCM31B7U2E103JX01#
1.8mm 1000Vdc C0G 1000pF
±5%
GCM31C5C3A102JX03#
U2J 1000pF
±5%
GCM31C7U3A102JX03#
630Vdc C0G 3300pF
±5%
GCM31C5C2J332JX03#
4700pF
±5%
GCM31C5C2J472JX03#
U2J 4700pF
±5%
GCM31C7U2J472JX03#
250Vdc C0G 15000pF
±5%
GCM31C5C2E153JX03#
22000pF
±5%
GCM31C5C2E223JX03#
100Vdc C0G 68000pF
±5%
GCM31C5C2A683JE02#
82000pF
±5%
GCM31C5C2A823JE02#
0.10μF
±5%
GCM31C5C2A104JE02#
C0G 68000pF
±5%
GCM31C5C1H683JA16#
82000pF
±5%
GCM31C5C1H823JA16#
0.10μF
±5%
GCM31C5C1H104JA16#
Cap.
Tol.
Part Number
250Vdc U2J 6800pF
10000pF
50Vdc
5.7×5.0mm
100pF
2200pF
GCE Series
GCD Series
Part Number
1.25mm 1000Vdc C0G
NMF Series
KCM Series
KC3 Series
KCA Series
GCG Series
!Caution/
Notice
40
C03E.pdf
Nov. 22,2019
(→ 3.2×1.6mm)
GC3 Series
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
3.2×2.5mm
T
max.
Rated
TC
Voltage Code
1.0mm 630Vdc U2J 1500pF
±5%
GCM32A7U2J152JX01#
2200pF
±5%
GCM32A7U2J222JX01#
1.5mm 1000Vdc U2J 1500pF
±5%
GCM32Q7U3A152JX01#
630Vdc U2J 6800pF
±5%
GCM32Q7U2J682JX01#
2.0mm 1000Vdc U2J 2200pF
±5%
GCM32D7U3A222JX01#
±5%
GCM32D7U2J103JX01#
Tol.
Part Number
1.5mm 1000Vdc U2J 3300pF
±5%
GCM43Q7U3A332JX01#
2.0mm 1000Vdc U2J 4700pF
±5%
GCM43D7U3A472JX01#
630Vdc U2J 15000pF
±5%
GCM43D7U2J153JX01#
22000pF
±5%
GCM43D7U2J223JX01#
630Vdc U2J 10000pF
4.5×3.2mm
T
max.
Rated
TC
Voltage Code
Cap.
Part number # indicates the package specification code.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
22000pF ±10% GCM155R71E223KA55#
220pF
±10% GCM033R71E221KA03#
33000pF ±10% GCM155R71E333KA55#
330pF
±10% GCM033R71E331KA03#
47000pF ±10% GCM155R71E473KA55#
470pF
±10% GCM033R71E471KA03#
680pF
±10% GCM033R71E681KA03#
47000pF ±10% GCM155R71C473KA37#
1000pF
±10% GCM033R71E102KA03#
68000pF ±10% GCM155R71C683KA55#
1500pF
±10% GCM033R71E152KA03#
0.10μF
±10% GCM155R71C104KA55#
2200pF
±10% GCM033R71E222KE02#
0.15μF
±10% GCM155R71C154KE02#
3300pF
±10% GCM033R71E332KE02#
0.22μF
±10% GCM155R71C224KE02#
330pF
±10% GCM033R71C331KA03#
0.6mm
10Vdc
X7S
0.47μF
±10% GCM155C71A474KE36#
680pF
±10% GCM033R71C681KA03#
0.7mm
10Vdc
X7S
0.68μF
±10% GCM155C71A684KE38#
2200pF
±10% GCM033R71C222KA55#
1.0μF
±10% GCM155C71A105KE38#
3300pF
±10% GCM033R71C332KA55#
X7R 4700pF
±10% GCM033R71A472KA03#
6800pF
±10% GCM033R71A682KA03#
X7R
16Vdc
X7R 33000pF ±10% GCM155R71C333KA37#
1.6×0.8mm
T
max.
Rated
TC
Voltage Code
Cap.
0.9mm 100Vdc X7R 6800pF
Tol.
Part Number
±10% GCM188R72A682KA37#
10000pF ±10% GCM188R72A103KA37#
Rated
TC
Voltage Code
0.55mm 100Vdc X7R
Cap.
Tol.
15000pF ±10% GCM188R72A153KA37#
Part Number
22000pF ±10% GCM188R72A223KA37#
220pF
±10% GCM155R72A221KA37#
50Vdc
X7R
0.22μF
±10% GCM188R71H224KA64#
330pF
±10% GCM155R72A331KA37#
25Vdc
X7R
0.22μF
±10% GCM188R71E224KA55#
470pF
±10% GCM155R72A471KA37#
0.47μF
±10% GCM188R71E474KA64#
1.0μF
±10% GCM188R71E105KA64#
0.33μF
±10% GCM188R71C334KA37#
±10% GCM155R72A152KA37#
0.47μF
±10% GCM188R71C474KA55#
±10% GCM155R72A222KA37#
1.0μF
±10% GCM188R71C105KA64#
680pF
±10% GCM155R72A681KA37#
1000pF
±10% GCM155R72A102KA37#
1500pF
2200pF
3300pF
±10% GCM155R72A332KA37#
4700pF
±10% GCM155R72A472KA37#
16Vdc
1.0mm
X8L 33000pF ±10% GCM155L8EH333KE07#
X7R
6.3Vdc
X7R
2.2μF
±10% GCM188R70J225KE22#
6.3Vdc
X7T
10μF
±20% GCM188D70J106ME36#
4Vdc
X7T
10μF
±20% GCM188D70G106ME36#
Rated
TC
Voltage Code
Cap.
GCM Series
±10% GCM033R71E151KA03#
GC3 Series
15000pF ±10% GCM155R71E153KA55#
150pF
GCJ Series
X7R 10000pF ±10% GCM155R71E103KA37#
GCQ Series
±10% GCM155L81E104KE02#
GCD Series
0.10μF
±10% GCM033R71E101KA03#
1.0×0.5mm
50Vdc
X8L
100pF
X7R
10000pF ±10% GCM033R71A103KA03#
T
max.
0.55mm 25Vdc
47000pF ±10% GCM155L8EH473KE07#
68000pF ±10% GCM155L8EH683KE07#
X7R
2.0×1.25mm
0.10μF
±10% GCM155L8EH104KE07#
220pF
±10% GCM155R71H221KA37#
330pF
±10% GCM155R71H331KA37#
470pF
±10% GCM155R71H471KA37#
680pF
±10% GCM155R71H681KA37#
50Vdc
X7R
0.33μF
±10% GCM219R71H334KA55#
1000pF
±10% GCM155R71H102KA37#
25Vdc
X7R
0.47μF
±10% GCM219R71E474KA55#
1500pF
±10% GCM155R71H152KA37#
16Vdc
X7R
1.0μF
±10% GCM219R71C105KA37#
2200pF
±10% GCM155R71H222KA37#
1.4mm 100Vdc X7R 47000pF ±10% GCM21BR72A473KA37#
3300pF
±10% GCM155R71H332KA37#
68000pF ±10% GCM21BR72A683KA37#
4700pF
±10% GCM155R71H472KA37#
6800pF
±10% GCM155R71H682KA55#
T
max.
Part Number
0.95mm 100Vdc X7R 33000pF ±10% GCM219R72A333KA37#
50Vdc
X7R
10000pF ±10% GCM155R71H103KA55#
15000pF ±10% GCM155R71H153KA55#
22000pF ±10% GCM155R71H223KA55#
Tol.
0.10μF
±10% GCM21BR72A104KA37#
0.22μF
±10% GCM21BR71H224KA37#
0.47μF
±10% GCM21BR71H474KA55#
1.0μF
±10% GCM21BR71H105KA03#
X8L
2.2μF
±10% GCM21BL8EG225KE07#
X7R
0.68μF
±10% GCM21BR7YA684KA55#
47000pF ±10% GCM155R71H473KE02#
1.0μF
±10% GCM21BR7YA105KA55#
68000pF ±10% GCM155R71H683KE02#
1.5μF
±10% GCM21BR7YA155KA54#
2.2μF
±10% GCM21BC7YA225KE02#
33000pF ±10% GCM155R71H333KE02#
0.10μF
±10% GCM155R71H104KE02#
35Vdc
X7S
Part number # indicates the package specification code.
KC3 Series
10Vdc
Part Number
KCA Series
16Vdc
Tol.
Part Number
GCG Series
0.33mm 25Vdc
Cap.
Tol.
GCE Series
Rated
TC
Voltage Code
Cap.
!Caution
/Notice
T
max.
Rated
TC
Voltage Code
NMF Series
T
max.
0.6×0.3mm
Part Number List
KCM Series
GCM Series High Dielectric Constant Type
C03E.pdf
Nov. 22,2019
GRT Series
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
41
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GCM Series High Dielectric Constant Type
T
max.
Rated
TC
Voltage Code
Cap.
25Vdc
X8L
1.5μF
±10% GCM21BL8EF155KA07#
X7R
0.33μF
±10% GCM21BR71E334KA37#
0.68μF
±10% GCM21BR71E684KA55#
1.0μF
±10% GCM21BR71E105KA56#
1.5μF
±10% GCM21BR71E155KA54#
2.2μF
±10% GCM21BR71E225KA73#
2.2μF
±10% GCM21BR71C225KA64#
4.7μF
±10% GCM21BR71C475KA73#
2.2μF
±10% GCM21BR71A225KA37#
10μF
±10% GCM21BR71A106KE22#
4.7μF
±10% GCM21BC71A475KA73#
X7R
10μF
±10% GCM21BR70J106KE22#
1.45mm 100Vdc X7S
1.0μF
±10% GCM21BC72A105KE36#
X8L
4.7μF
±10% GCM21BL8EG475KE08#
1.4mm
16Vdc
GCJ Series
10Vdc
X7R
X7R
X7S
X7S
4.7μF
±10% GCM21BC7YA475KE36#
25Vdc
X8L
4.7μF
±10% GCM21BL8EF475KE08#
X7S
4.7μF
±10% GCM21BC71E475KE36#
16Vdc
X8M
10μF
±10% GCM21BM8EE106KE08#
X7S
10μF
±10% GCM21BC71C106KE36#
Rated
TC
Voltage Code
Cap.
GCE Series
GCQ Series
Part Number
GCD Series
6.3Vdc
Tol.
35Vdc
T
max.
NMF Series
Tol.
T
max.
Rated
TC
Voltage Code
2.85mm 25Vdc
Cap.
Tol.
Part Number
X8L
22μF
±10% GCM32EL8EF226KE08#
X7S
22μF
±10% GCM32EC71E226KE36#
Part Number
0.22μF
±10% GCM31MR72A224KA37#
X8L
1.0μF
±10% GCM31ML81E105KA37#
1.8mm 100Vdc X8L
2.2μF
±10% GCM31CL8EL225KE07#
X7S
2.2μF
±10% GCM31CC72A225KE02#
X8L
1.0μF
±10% GCM31CL81H105KA55#
X7R
2.2μF
±10% GCM31CR71H225KA55#
X7S
4.7μF
±10% GCM31CC71H475KA03#
X8R
1.0μF
±10% GCM31CR91E105KA37#
X7R
4.7μF
±10% GCM31CR71E475KA55#
X7R
4.7μF
±10% GCM31CR71C475KA37#
10μF
±10% GCM31CR71C106KA64#
1.25mm 100Vdc X7R
50Vdc
KCM Series
KC3 Series
KCA Series
GCG Series
!Caution/
Notice
Part Number List
3.2×1.6mm
25Vdc
25Vdc
16Vdc
1.9mm
10Vdc
X7R
22μF
±10% GCM31CR71A226KE02#
6.3Vdc
X7R
22μF
±20% GCM31CR70J226ME23#
25Vdc
X7S
10μF
±10% GCM31CC71E106KA03#
Rated
TC
Voltage Code
Cap.
3.2×2.5mm
T
max.
Tol.
Part Number
2.2mm 100Vdc X8L
4.7μF
±10% GCM32DL8EL475KE07#
X7S
4.7μF
±10% GCM32DC72A475KE02#
2.7mm
X8L
10μF
±10% GCM32EL8EH106KA07#
X7R
4.7μF
±10% GCM32ER71H475KA55#
X7S
10μF
±10% GCM32EC71H106KA03#
35Vdc
X7S
10μF
±10% GCM32EC7YA106KA03#
25Vdc
X7R
10μF
±10% GCM32ER71E106KA57#
16Vdc
X7R
22μF
±20% GCM32ER71C226ME19#
10Vdc
X7R
22μF
±20% GCM32ER71A226ME12#
X7S
47μF
±10% GCM32EC71A476KE02#
X7R
47μF
±20% GCM32ER70J476ME19#
50Vdc
6.3Vdc
42
C03E.pdf
Nov. 22,2019
(→ 2.0×1.25mm)
GC3 Series
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part number # indicates the package specification code.
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRT Series
Nov. 22,2019
High Effective Capacitance & High Ripple Current Chip Multilayer Ceramic Capacitors for Automotive
This is a high ripple resistance product for automotive excellent in DC bias
characteristics.
Features
1
When a DC bias is applied, a capacitance higher than conventional products (X7R characteristics)
can be acquired.
When DC600V is applied, about twice the capacitance can be secured.
20
GC3 Series
GCM Series
WEB
GCJ Series
GC3 Series
GCQ Series
-20
-40
-60
New Material GC3
Conventional Material GCM
5750 (in mm)/2220 (in inch)/0.1µF/630V
-80
-100
0
100
200
300 400
DC Bias (V)
500
600
GCD Series
Cap Change (%)
0
700
Improved ripple resistance performance compared to conventional products (X7R characteristics).
In the case of a product with a capacitance of 0.1µF, when the exothermic temperature reaches 20°C at frequency
f=300kHz, the amount of resistance of a product with conventional material is 1.8Arms; however, the new material
is 2.3Arms.
5750 (in mm)/2220 (in inch)/0.1µF/630V
30kHz
1.8Arms 2.3Arms
KCM Series
30kHz
20°C
10
300kHz
300kHz
100kHz
1
100kHz
0
0.5
1
1.5
2
Current (Arms)
2.5
3
KC3 Series
Temperature Rise (°C)
100
NMF Series
2
GCE Series
New Material GC3
Conventional Material GCM
This product has a noise reduction effect.
GCG Series
Since dielectric materials that enable a reduction of noise are used, this product is more effective for reducing noise
compared to the GCM series for automotive.
Specifications
Size
2.0×1.25mm to 5.7×5.0mm
Rated Voltage
250Vdc to 630Vdc
Capacitance
10000pF to 1.0µF
Main Applications
For PFC (Power Factor Correction) Circuits of Power Supplies, EMI Suppression
and Smoothing Circuits of automotive
e
g
e
T
L
W
!Caution
/Notice
3
KCA Series
43
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GC3 Series High Dielectric Constant Type
T
max.
Rated
TC
Voltage Code
Part Number List
T
max.
2.0×1.25mm
Cap.
Tol.
Part Number
C03E.pdf
Nov. 22,2019
Rated
TC
Voltage Code
Cap.
2.7mm 250Vdc X7T
1.0μF
Tol.
Part Number
±10% GC355XD72E105KX05#
1.0mm 250Vdc X7T 10000pF ±10% GC321AD72E103KX01#
GCJ Series
GC3 Series
15000pF ±10% GC321AD72E153KX01#
1.45mm 250Vdc X7T 22000pF ±10% GC321BD72E223KX03#
3.2×1.6mm
T
max.
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
1.0mm 450Vdc X7T 10000pF ±10% GC331AD72W103KX01#
15000pF ±10% GC331AD72W153KX01#
GCQ Series
1.25mm 630Vdc X7T 10000pF ±10% GC331BD72J103KX01#
GCD Series
250Vdc X7T 33000pF ±10% GC331AD72E333KX01#
1.8mm 630Vdc X7T 15000pF ±10% GC331CD72J153KX03#
450Vdc X7T 22000pF ±10% GC331BD72W223KX01#
33000pF ±10% GC331BD72W333KX01#
GCE Series
250Vdc X7T 47000pF ±10% GC331BD72E473KX01#
450Vdc X7T 47000pF ±10% GC331CD72W473KX03#
250Vdc X7T 68000pF ±10% GC331CD72E683KX03#
3.2×2.5mm
T
max.
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
!Caution/
Notice
GCG Series
KCA Series
KC3 Series
KCM Series
NMF Series
1.5mm 630Vdc X7T 22000pF ±10% GC332QD72J223KX01#
250Vdc X7T
±10% GC332QD72E104KX01#
2.0mm 630Vdc X7T 33000pF ±10% GC332DD72J333KX01#
47000pF ±10% GC332DD72J473KX01#
450Vdc X7T 68000pF ±10% GC332DD72W683KX01#
250Vdc X7T
0.10μF
±10% GC332DD72W104KX01#
0.15μF
±10% GC332DD72E154KX01#
4.5×3.2mm
T
max.
Rated
TC
Voltage Code
1.5mm 250Vdc X7T
Cap.
0.22μF
Tol.
Part Number
±10% GC343QD72E224KX01#
2.0mm 630Vdc X7T 68000pF ±10% GC343DD72J683KX01#
450Vdc X7T
0.15μF
±10% GC343DD72W154KX01#
250Vdc X7T
0.33μF
±10% GC343DD72E334KX01#
5.7×5.0mm
T
max.
Rated
TC
Voltage Code
2.0mm 630Vdc X7T
450Vdc X7T
250Vdc X7T
2.7mm 630Vdc X7T
44
0.10μF
Cap.
Tol.
Part Number
0.10μF
±10% GC355DD72J104KX01#
0.15μF
±10% GC355DD72J154KX01#
0.22μF
±10% GC355DD72W224KX01#
0.33μF
±10% GC355DD72W334KX01#
0.47μF
±10% GC355DD72W474KX01#
0.47μF
±10% GC355DD72E474KX01#
0.68μF
±10% GC355DD72E684KX01#
0.22μF
±10% GC355XD72J224KX05#
Part number # indicates the package specification code.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Soft Termination Chip Multilayer Ceramic Capacitors for Automotive
WEB
Features
The resin external electrodes suppress cracks by board deflection.
Cracking of the ceramic element is suppressed by the resin of the external electrodes, which releases the stress.
Ceramic
Resin Electrodes Layer
oFor Automotive (GCM Series)
Occurrence of cracking on
edge of terminal electrode
Foundation Electrode Layer Ni/Sn Plated Layer
oResin External Electrode Type (GCJ Series)
GCD Series
Resin electrodes relieve the stress
Conductive resin layer relieves
the mechanical stress of the ceramic
Separated foundation
electrode and resin electrode
Note: Cracks may occur in the capacitor body if excessive stress beyond the "guaranteed range of board bending strength (*) " provided in
the specifications is applied. Capacitors with cracks in them may cause a drop in insulation resistance, which could lead to a short circuit.
(*) For details on the guaranteed range of board bending strength, check the "Detailed Specification Sheet" on the Product Details Page.
2
Suppresses the occurrence of cracking caused by deflection stress at the time of board mounting, etc.
GCE Series
Internal Electrodes
NMF Series
1
GCJ Series
GC3 Series
Cracking caused by flexing stress after board mounting is minimized due to resin
external electrodes!
GCQ Series
GCJ Series
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
KCM Series
GCJ/0603 (in inch)/104/50V
GCM/0603 (in inch)/104/50V
80
60
KC3 Series
40
20
0
0
1
2
3
4
5
Deflection Amount (mm)
6
7
8
3
KCA Series
Products shall be judged to be defective if the change in capacitance has exceeded ±12.5%
The measurement specification is 8mm max.
Ideal for automotive.
GCG Series
The products conforms to the AEC-Q200.
Specifications
Size
Rated Voltage
Capacitance
Main Applications
1.6×0.8mm to 5.7×5.0mm
e
g
e
6.3Vdc to 1000Vdc
T
220pF to 47µF
Battery Lines and Powertrains for automotive
L
!Caution
/Notice
Residual Ratio (%)
100
W
45
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GCJ Series High Dielectric Constant Type
T
max.
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
Part Number
X7R 1200pF
±10% GCJ188R71H122KA01#
±10% GCJ188R71H152KA01#
1800pF
±10% GCJ188R71H182KA01#
X8R 1000pF
±10% GCJ188R92A102KA01#
2200pF
±10% GCJ188R71H222KA01#
1200pF
±10% GCJ188R92A122KA01#
2700pF
±10% GCJ188R71H272KA01#
1500pF
±10% GCJ188R92A152KA01#
3300pF
±10% GCJ188R71H332KA01#
1800pF
±10% GCJ188R92A182KA01#
3900pF
±10% GCJ188R71H392KA01#
2200pF
±10% GCJ188R92A222KA01#
4700pF
±10% GCJ188R71H472KA01#
2700pF
±10% GCJ188R92A272KA01#
5600pF
±10% GCJ188R71H562KA01#
3300pF
±10% GCJ188R92A332KA01#
6800pF
±10% GCJ188R71H682KA01#
3900pF
±10% GCJ188R92A392KA01#
8200pF
±10% GCJ188R71H822KA01#
4700pF
±10% GCJ188R92A472KA01#
10000pF ±10% GCJ188R71H103KA01#
5600pF
±10% GCJ188R92A562KA01#
12000pF ±10% GCJ188R71H123KA01#
6800pF
±10% GCJ188R92A682KA01#
15000pF ±10% GCJ188R71H153KA01#
8200pF
±10% GCJ188R92A822KA01#
18000pF ±10% GCJ188R71H183KA01#
10000pF ±10% GCJ188R92A103KA01#
22000pF ±10% GCJ188R71H223KA01#
12000pF ±10% GCJ188R92A123KA01#
33000pF ±10% GCJ188R71H333KA12#
15000pF ±10% GCJ188R92A153KA01#
39000pF ±10% GCJ188R71H393KA12#
18000pF ±10% GCJ188R92A183KA01#
47000pF ±10% GCJ188R71H473KA12#
22000pF ±10% GCJ188R92A223KA01#
56000pF ±10% GCJ188R71H563KA12#
27000pF ±10% GCJ188R92A273KA01#
68000pF ±10% GCJ188R71H683KA12#
33000pF ±10% GCJ188R92A333KA01#
82000pF ±10% GCJ188R71H823KA12#
GCJ Series
GCQ Series
GCD Series
GCE Series
39000pF ±10% GCJ188R92A393KA01#
0.10μF
±10% GCJ188R71H104KA12#
47000pF ±10% GCJ188R92A473KA01#
0.15μF
±10% GCJ188R71H154KA01#
56000pF ±10% GCJ188R92A563KA01#
0.22μF
±10% GCJ188R71H224KA01#
35Vdc
X8L 33000pF ±10% GCJ188L8YA333KA01#
X7R 1000pF
±10% GCJ188R72A102KA01#
39000pF ±10% GCJ188L8YA393KA01#
1200pF
±10% GCJ188R72A122KA01#
56000pF ±10% GCJ188L8YA563KA01#
1500pF
±10% GCJ188R72A152KA01#
1800pF
±10% GCJ188R72A182KA01#
2200pF
±10% GCJ188R72A222KA01#
39000pF ±10% GCJ188L81E393KA01#
2700pF
±10% GCJ188R72A272KA01#
56000pF ±10% GCJ188L81E563KA01#
3300pF
±10% GCJ188R72A332KA01#
68000pF ±10% GCJ188L81E683KA01#
3900pF
±10% GCJ188R72A392KA01#
82000pF ±10% GCJ188L81E823KA01#
4700pF
±10% GCJ188R72A472KA01#
0.15μF
±10% GCJ188L81E154KA01#
5600pF
±10% GCJ188R72A562KA01#
0.18μF
±10% GCJ188L81E184KA01#
6800pF
±10% GCJ188R72A682KA01#
0.22μF
±10% GCJ188L81E224KA01#
8200pF
±10% GCJ188R72A822KA01#
0.33μF
±10% GCJ188R91E334KA01#
10000pF ±10% GCJ188R72A103KA01#
0.39μF
±10% GCJ188R91E394KA01#
12000pF ±10% GCJ188R72A123KA01#
0.47μF
±10% GCJ188R91E474KA01#
15000pF ±10% GCJ188R72A153KA01#
X7R 1000pF
±10% GCJ188R71E102KA01#
18000pF ±10% GCJ188R72A183KA01#
1200pF
±10% GCJ188R71E122KA01#
22000pF ±10% GCJ188R72A223KA01#
1500pF
±10% GCJ188R71E152KA01#
0.10μF
±10% GCJ188R72A104KA01#
1800pF
±10% GCJ188R71E182KA01#
0.15μF
±10% GCJ188L8EH154KA07#
2200pF
±10% GCJ188R71E222KA01#
0.22μF
±10% GCJ188L8EH224KA07#
2700pF
±10% GCJ188R71E272KA01#
X8R 4700pF
±10% GCJ188R91H472KA01#
3300pF
±10% GCJ188R71E332KA01#
10000pF ±10% GCJ188R91H103KA01#
3900pF
±10% GCJ188R71E392KA01#
0.10μF
±10% GCJ188R91H104KA01#
4700pF
±10% GCJ188R71E472KA01#
0.12μF
±10% GCJ188R91H124KA01#
5600pF
±10% GCJ188R71E562KA01#
0.15μF
±10% GCJ188R91H154KA01#
6800pF
±10% GCJ188R71E682KA01#
0.18μF
±10% GCJ188R91H184KA01#
8200pF
±10% GCJ188R71E822KA01#
0.22μF
±10% GCJ188R91H224KA01#
10000pF ±10% GCJ188R71E103KA01#
X7R 1000pF
±10% GCJ188R71H102KA01#
12000pF ±10% GCJ188R71E123KA01#
KC3 Series
KCM Series
NMF Series
Tol.
1500pF
KCA Series
GCG Series
!Caution/
Notice
46
50Vdc
Cap.
±10% GCJ188L8EL104KA07#
68000pF ±10% GCJ188R92A683KA01#
50Vdc
0.9mm
Rated
TC
Voltage Code
0.10μF
0.9mm 100Vdc X8L
X8L
C03E.pdf
Nov. 22,2019
Part Number List
T
max.
1.6×0.8mm
GC3 Series
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
68000pF ±10% GCJ188L8YA683KA01#
25Vdc
X8L 33000pF ±10% GCJ188L81E333KA01#
X8R
Part number # indicates the package specification code.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number List
(→ 1.6×0.8mm)
18000pF ±10% GCJ188R71E183KA01#
2200pF
±10% GCJ21AR72E222KXJ1#
22000pF ±10% GCJ188R71E223KA01#
3300pF
±10% GCJ21AR72E332KXJ1#
27000pF ±10% GCJ188R71E273KA01#
4700pF
±10% GCJ21AR72E472KXJ1#
33000pF ±10% GCJ188R71E333KA01#
6800pF
±10% GCJ21AR72E682KXJ1#
1.45mm 250Vdc X7R 10000pF ±10% GCJ21BR72E103KXJ3#
47000pF ±10% GCJ188R71E473KA01#
15000pF ±10% GCJ21BR72E153KXJ3#
56000pF ±10% GCJ188R71E563KA12#
22000pF ±10% GCJ21BR72E223KXJ3#
68000pF ±10% GCJ188R71E683KA12#
100Vdc X7R 47000pF ±10% GCJ21BR72A473KA01#
82000pF ±10% GCJ188R71E823KA12#
56000pF ±10% GCJ21BR72A563KA01#
0.10μF
±10% GCJ188R71E104KA12#
68000pF ±10% GCJ21BR72A683KA01#
0.12μF
±10% GCJ188R71E124KA01#
82000pF ±10% GCJ21BR72A823KA01#
0.15μF
±10% GCJ188R71E154KA01#
0.18μF
±10% GCJ188R71E184KA12#
0.22μF
±10% GCJ188R71E224KA12#
0.10μF
±10% GCJ21BL81H104KA01#
1.0μF
±10% GCJ188R71E105KA01#
0.47μF
±10% GCJ21BL8EH474KA07#
0.22μF
±10% GCJ188L81C224KA01#
0.22μF
±10% GCJ21BR71H224KA01#
0.47μF
±10% GCJ21BR71H474KA12#
±10% GCJ21BR72A104KA01#
X8L 82000pF ±10% GCJ21BL81H823KA01#
X7R
1.0μF
±10% GCJ21BR71H105KA01#
0.12μF
±10% GCJ21BL8YA124KA01#
47000pF ±10% GCJ188R71C473KA01#
0.15μF
±10% GCJ21BL8YA154KA01#
56000pF ±10% GCJ188R71C563KA01#
0.18μF
±10% GCJ21BL8YA184KA01#
68000pF ±10% GCJ188R71C683KA01#
0.22μF
±10% GCJ21BL8YA224KA01#
82000pF ±10% GCJ188R71C823KA01#
0.33μF
±10% GCJ21BL8YA334KA01#
0.10μF
±10% GCJ188R71C104KA01#
0.47μF
±10% GCJ21BL8YA474KA01#
0.12μF
±10% GCJ188R71C124KA01#
0.12μF
±10% GCJ21BL81E124KA01#
0.15μF
±10% GCJ188R71C154KA01#
0.15μF
±10% GCJ21BL81E154KA01#
0.18μF
±10% GCJ188R71C184KA01#
0.18μF
±10% GCJ21BL81E184KA01#
0.22μF
±10% GCJ188R71C224KA01#
0.22μF
±10% GCJ21BL81E224KA01#
0.27μF
±10% GCJ188R71C274KA01#
0.27μF
±10% GCJ21BL81E274KA01#
0.33μF
±10% GCJ188R71C334KA01#
0.33μF
±10% GCJ21BL81E334KA01#
0.39μF
±10% GCJ188R71C394KA12#
0.39μF
±10% GCJ21BL81E394KA01#
39000pF ±10% GCJ188R71C393KA01#
35Vdc
25Vdc
X8L
X8L
0.47μF
±10% GCJ188R71C474KA12#
0.47μF
±10% GCJ21BL81E474KA01#
10Vdc
X7R
0.22μF
±10% GCJ188R71A224KA01#
0.68μF
±10% GCJ21BL81E684KA01#
6.3Vdc
X7R
2.2μF
±10% GCJ188R70J225KE01#
0.82μF
±10% GCJ21BL81E824KA01#
6.3Vdc
X8L
3.3μF
±10% GCJ188L8EC335KE08#
1.0μF
±10% GCJ21BL81E105KA01#
X8M
4.7μF
±10% GCJ188M8EC475KE08#
0.27μF
±10% GCJ21BR71E274KA01#
X7S
3.3μF
±10% GCJ188C70J335KE02#
0.39μF
±10% GCJ21BR71E394KA01#
4.7μF
±10% GCJ188C70J475KE02#
0.56μF
±10% GCJ21BR71E564KA12#
0.68μF
±10% GCJ21BR71E684KA12#
0.82μF
±10% GCJ21BR71E824KA12#
1.0μF
±10% GCJ21BR71E105KA12#
1.5μF
±10% GCJ21BR71E155KA01#
X7R
2.0×1.25mm
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
2.2μF
±10% GCJ21BR71E225KA01#
0.56μF
±10% GCJ21BL81C564KA01#
33000pF ±10% GCJ219R72A333KA01#
0.68μF
±10% GCJ21BL81C684KA01#
39000pF ±10% GCJ219R72A393KA01#
0.82μF
±10% GCJ21BL81C824KA01#
1.0μF
±10% GCJ21BL81C105KA01#
0.95mm 100Vdc X7R 27000pF ±10% GCJ219R72A273KA01#
50Vdc
X7R
25Vdc
X7R
16Vdc
X7R
0.33μF
16Vdc
X8L
±10% GCJ219R71H334KA12#
0.33μF
±10% GCJ219R71E334KA01#
0.27μF
±10% GCJ21BR71C274KA01#
0.47μF
±10% GCJ219R71E474KA12#
0.33μF
±10% GCJ21BR71C334KA01#
0.68μF
±10% GCJ219R71C684KA01#
0.39μF
±10% GCJ21BR71C394KA01#
0.82μF
±10% GCJ219R71C824KA01#
0.47μF
±10% GCJ21BR71C474KA01#
1.0μF
±10% GCJ219R71C105KA01#
0.56μF
±10% GCJ21BR71C564KA01#
±10% GCJ21AR72E102KXJ1#
1.0μF
±10% GCJ21BR71C105KA01#
1.0mm 250Vdc X7R 1000pF
X7R
Part number # indicates the package specification code.
GCQ Series
0.10μF
50Vdc
GCD Series
X8L
39000pF ±10% GCJ188R71E393KA01#
GC3 Series
±10% GCJ21AR72E152KXJ1#
GCM Series
Part Number
1.0mm 250Vdc X7R 1500pF
33000pF ±10% GCJ188R71C333KA01#
T
max.
Tol.
X7R 15000pF ±10% GCJ188R71E153KA01#
X7R 27000pF ±10% GCJ188R71C273KA01#
1.0mm
Cap.
GCE Series
Rated
TC
Voltage Code
NMF Series
T
max.
KCM Series
Part Number
KC3 Series
16Vdc
Tol.
KCA Series
25Vdc
Cap.
GCG Series
0.9mm
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GCJ Series
GCJ Series High Dielectric Constant Type
C03E.pdf
Nov. 22,2019
GRT Series
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
47
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GCJ Series High Dielectric Constant Type
T
max.
Rated
TC
Voltage Code
1.45mm 16Vdc
X7R
10Vdc
X7R
1.5mm 100Vdc X7S
GCE Series
NMF Series
KCM Series
Cap.
KC3 Series
KCA Series
GCG Series
Tol.
Part Number
T
max.
Rated
TC
Voltage Code
Cap.
16Vdc
X8L
4.7μF
±10% GCJ31CL81C475KA01#
X7R
T
max.
Rated
TC
Voltage Code
Tol.
Part Number
2.2μF
±10% GCJ21BR71C225KA13#
4.7μF
±10% GCJ21BR71C475KA01#
3.3μF
±10% GCJ31CR71C335KA01#
2.2μF
±10% GCJ21BR71A225KA01#
4.7μF
±10% GCJ31CR71C475KA01#
10μF
±10% GCJ21BR71A106KE01#
10μF
±10% GCJ31CR71C106KA15#
1.0μF
±10% GCJ21BC72A105KE02#
X8L
22μF
±10% GCJ31CL8ED226KE07#
X7R
6.8μF
±10% GCJ31CR71A685KA13#
10μF
±10% GCJ31CR71A106KA13#
22μF
±10% GCJ31CR71A226KE01#
Cap.
Tol.
Part Number
1.25mm 1000Vdc X7R 1000pF
±10% GCJ31BR73A102KXJ1#
1500pF
±10% GCJ31BR73A152KXJ1#
2200pF
±10% GCJ31BR73A222KXJ1#
3300pF
±10% GCJ31BR73A332KXJ1#
1.9mm
10Vdc
2.0mm
6.3Vdc
X7R
22μF
±10% GCJ31CR70J226KE01#
25Vdc
X8L
10μF
±10% GCJ31CL8EF106KA08#
X7S
10μF
±10% GCJ31CC71E106KA15#
Rated
TC
Voltage Code
Cap.
3.2×2.5mm
4700pF
±10% GCJ31BR73A472KXJ1#
630Vdc X7R 1000pF
±10% GCJ31BR72J102KXJ1#
1500pF
±10% GCJ31BR72J152KXJ1#
2200pF
±10% GCJ31BR72J222KXJ1#
10000pF ±10% GCJ32QR72J103KXJ1#
3300pF
±10% GCJ31BR72J332KXJ1#
250Vdc X7R 68000pF ±10% GCJ32QR72E683KXJ1#
4700pF
±10% GCJ31BR72J472KXJ1#
6800pF
±10% GCJ31BR72J682KXJ1#
2.0mm 1000Vdc X7R 15000pF ±10% GCJ32DR73A153KXJ1#
10000pF ±10% GCJ31BR72J103KXJ1#
22000pF ±10% GCJ32DR73A223KXJ1#
250Vdc X7R 15000pF ±10% GCJ31BR72E153KXJ1#
630Vdc X7R 15000pF ±10% GCJ32DR72J153KXJ1#
22000pF ±10% GCJ31BR72E223KXJ1#
22000pF ±10% GCJ32DR72J223KXJ1#
68000pF ±10% GCJ31BR72E683KXJ1#
33000pF ±10% GCJ32DR72J333KXJ1#
50Vdc
25Vdc
X7R
X7R
T
max.
1.5mm 630Vdc X7R 6800pF
0.15μF
Tol.
Part Number
±10% GCJ32QR72J682KXJ1#
±10% GCJ32QR72E154KXJ1#
0.15μF
±10% GCJ31MR72A154KA01#
0.18μF
±10% GCJ31MR72A184KA01#
0.22μF
±10% GCJ31MR72A224KA01#
0.47μF
±10% GCJ31MR71H474KA01#
2.3mm 100Vdc X8L
2.2μF
±10% GCJ32DL8EL225KA07#
0.56μF
±10% GCJ31MR71H564KA12#
X7R
2.2μF
±10% GCJ32DR72A225KA01#
0.68μF
±10% GCJ31MR71H684KA12#
0.82μF
±10% GCJ31MR71H824KA12#
1.0μF
±10% GCJ31MR71H105KA12#
X7S
10μF
±10% GCJ32EC71H106KA01#
2.2μF
±10% GCJ31MR71E225KA12#
25Vdc
X8L
4.7μF
±10% GCJ32EL81E475KA01#
±10% GCJ31MR71E335KA12#
16Vdc
X8R
6.8μF
±10% GCJ32ER91C685KE01#
10μF
±10% GCJ32ER91C106KE01#
X7R
22μF
±10% GCJ32ER71C226KE01#
X7R
47μF
±10% GCJ32ER70J476KE01#
3.3μF
!Caution/
Notice
Part Number List
3.2×1.6mm
1.35mm 100Vdc X7R
48
C03E.pdf
Nov. 22,2019
(→ 2.0×1.25mm)
GCD Series
GCQ Series
GCJ Series
GC3 Series
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1.8mm 1000Vdc X7R 6800pF
47000pF ±10% GCJ32DR72J473KXJ1#
250Vdc X7R
2.8mm
50Vdc
630Vdc X7R 15000pF ±10% GCJ31CR72J153KXJ3#
6.3Vdc
22000pF ±10% GCJ31CR72J223KXJ3#
2.85mm 25Vdc
±10% GCJ32DR72E104KXJ1#
0.22μF
±10% GCJ32DR72E224KXJ1#
X7S
4.7μF
±10% GCJ32DC72A475KE01#
X7R
4.7μF
±10% GCJ32ER71H475KA12#
±10% GCJ31CR73A682KXJ3#
10000pF ±10% GCJ31CR73A103KXJ3#
0.10μF
X8L
22μF
±10% GCJ32EL8EF226KE08#
X7S
22μF
±10% GCJ32EC71E226KE02#
Rated
TC
Voltage Code
Cap.
250Vdc X7R 33000pF ±10% GCJ31CR72E333KXJ3#
47000pF ±10% GCJ31CR72E473KXJ3#
0.10μF
±10% GCJ31CR72E104KXJ3#
1.9mm 100Vdc X8L
1.0μF
±10% GCJ31CL8EL105KA07#
X7R
1.0μF
±10% GCJ31CR72A105KA01#
X7S
2.2μF
±10% GCJ31CC72A225KE01#
X7R
1.5μF
±10% GCJ31CR71H155KA12#
2.2μF
±10% GCJ31CR71H225KA12#
X7S
4.7μF
±10% GCJ31CC71H475KA01#
X8L
0.56μF
±10% GCJ31CL8YA564KA01#
47000pF ±10% GCJ43DR73A473KXJ1#
0.68μF
±10% GCJ31CL8YA684KA01#
630Vdc X7R 33000pF ±10% GCJ43DR72J333KXJ1#
0.82μF
±10% GCJ31CL8YA824KA01#
47000pF ±10% GCJ43DR72J473KXJ1#
1.0μF
±10% GCJ31CL8YA105KA01#
50Vdc
35Vdc
25Vdc
X7R
4.7μF
±10% GCJ31CR71E475KA12#
16Vdc
X8L
3.3μF
±10% GCJ31CL81C335KA01#
4.5×3.2mm
T
max.
Tol.
Part Number
1.5mm 630Vdc X7R 68000pF ±10% GCJ43QR72J683KXJ1#
250Vdc X7R
0.15μF
±10% GCJ43QR72E154KXJ1#
2.0mm 1000Vdc X7R 33000pF ±10% GCJ43DR73A333KXJ1#
250Vdc X7R
0.10μF
±10% GCJ43DR72J104KXJ1#
0.22μF
±10% GCJ43DR72E224KXJ1#
0.33μF
±10% GCJ43DR72E334KXJ1#
Part number # indicates the package specification code.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GCJ Series High Dielectric Constant Type
C03E.pdf
Nov. 22,2019
Part Number List
(→ 4.5×3.2mm)
Rated
TC
Voltage Code
2.0mm 250Vdc X7R
Cap.
0.47μF
Tol.
Part Number
GCM Series
T
max.
±10% GCJ43DR72E474KXJ1#
Rated
TC
Voltage Code
Cap.
Tol.
GC3 Series
5.7×5.0mm
T
max.
Part Number
2.0mm 1000Vdc X7R 68000pF ±10% GCJ55DR73A683KXJ1#
±10% GCJ55DR72E105KXJ1#
GCJ Series
±10% GCJ55DR72E684KXJ1#
1.0μF
GCQ Series
0.68μF
GCD Series
±10% GCJ55DR72E334KXJ1#
±10% GCJ55DR72E474KXJ1#
GCE Series
0.33μF
0.47μF
NMF Series
±10% GCJ55DR72J224KXJ1#
KCM Series
0.22μF
KC3 Series
±10% GCJ55DR72J154KXJ1#
KCA Series
±10% GCJ55DR72J104KXJ1#
0.15μF
GCG Series
250Vdc X7R
±10% GCJ55DR73A104KXJ1#
0.10μF
!Caution
/Notice
0.10μF
630Vdc X7R
GRT Series
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Part number # indicates the package specification code.
49
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GCQ Series
Features
1
High Q and Low ESR were achieved at a "high frequency," which is ideal for matching applications.
High Q and Low ESR were achieved at a high frequency, by adopting a ceramic material with extremely low loss at
a high frequency as the dielectric material, and copper for the internal electrodes. This product is ideal for matching
applications.
GCJ Series
GC3 Series
This product improves the high frequency characteristics and contributes to a
reduction of power consumption by the High Q and low ESR.
Capacitor for automotive applications such as power train and safety equipment.
Internal Electrodes (Cu)
Ni/Sn Plated Layer
GCQ Series
Ceramic
Foundation Electrode Layer
2
GCE Series
This is a High Q capacitor for V2X, ADAS, and automotive communication applications which conform
to AEC-Q200.
The self-resonant frequency of 5.9 GHz (for 2.2 pF products) is ideal for the DC-CUT in DSRC IEEE821.11p.
KCM Series
Q-frequency
10000
100
1000
10
100
Impedance (Ω)
NMF Series
Impedance characteristics
1000
Q
GCD Series
WEB
1
HiQ type
10
HiQ type
0.1
0
3000
6000
Frequency (MHz)
KC3 Series
KCA Series
GCG Series
!Caution/
Notice
50
C03E.pdf
Nov. 22,2019
High Q Chip Multilayer Ceramic Capacitors for Automotive
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
9000
0
1000
2000 3000 4000
Frequency (MHz)
6000
Standard type
HiQ type
Standard type
HiQ type
3
5000
Can be used for tight tolerance.
In addition to standard tolerance, the allowable range of this product is also suitable for the following tight tolerance.
Capacitance
Range
Standard Capacitance Tolerance
(Capacitance Tolerance Symbol)
Narrow Capacitance Tolerance
(Capacitance Tolerance Symbol)
to 0.9pF
±0.1pF (B)
±0.05pF (W)
1 to 5pF
±0.25pF (C)
±0.05pF (W), ±0.1pF (B)
5.1 to 9.9pF
±0.5pF (D)
±0.05pF (W), ±0.1pF (B), ±0.25pF (C)
±5% (J)
±2% (G)
10pF~
DC cut in the 5.9GHz of V2X applications, and RF matching
RF matching in the other automotive communication applications
W
GRT Series
GCM Series
L
GC3 Series
0.10pF to 47µF
GCJ Series
T
GCQ Series
50Vdc
GCD Series
e
GCE Series
Main Applications
g
NMF Series
Capacitance
e
KCM Series
Rated Voltage
1.0×0.5mm
KC3 Series
Size
KCA Series
Specifications
C03E.pdf
Nov. 22,2019
GCG Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
/Notice
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
51
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GCQ Series Temperature Compensating Type
T
max.
1.0×0.5mm
T
max.
Rated
TC
Voltage Code
0.55mm 50Vdc
C0G
Cap.
Tol.
Part Number
0.10pF ±0.05pF GCQ1555C1HR10WB01#
Part Number List
Rated
TC
Voltage Code
0.55mm 50Vdc
C0G
Cap.
2.1pF
GC3 Series
GCJ Series
2.3pF
2.4pF
±0.1pF GCQ1555C1H2R4BB01#
2.5pF
GCQ Series
±0.25pF GCQ1555C1H2R5CB01#
±0.1pF GCQ1555C1HR60BB01#
2.6pF
±0.25pF GCQ1555C1H2R6CB01#
KCA Series
KC3 Series
KCM Series
NMF Series
GCE Series
GCD Series
0.80pF ±0.05pF GCQ1555C1HR80WB01#
2.7pF
±0.25pF GCQ1555C1H2R7CB01#
±0.1pF GCQ1555C1HR90BB01#
2.8pF
±0.25pF GCQ1555C1H2R8CB01#
±0.25pF GCQ1555C1H1R0CB01#
1.3pF
1.4pF
1.5pF
1.6pF
1.7pF
2.9pF
±0.1pF GCQ1555C1H2R9BB01#
±0.25pF GCQ1555C1H1R1CB01#
±0.25pF GCQ1555C1H2R9CB01#
±0.05pF GCQ1555C1H1R2WB01#
3.0pF
GCG Series
!Caution/
Notice
2.0pF
2.1pF
52
±0.05pF GCQ1555C1H3R0WB01#
±0.1pF GCQ1555C1H1R2BB01#
±0.1pF GCQ1555C1H3R0BB01#
±0.25pF GCQ1555C1H1R2CB01#
±0.25pF GCQ1555C1H3R0CB01#
±0.05pF GCQ1555C1H1R3WB01#
3.1pF
±0.05pF GCQ1555C1H3R1WB01#
±0.1pF GCQ1555C1H1R3BB01#
±0.1pF GCQ1555C1H3R1BB01#
±0.25pF GCQ1555C1H1R3CB01#
±0.25pF GCQ1555C1H3R1CB01#
±0.05pF GCQ1555C1H1R4WB01#
3.2pF
±0.05pF GCQ1555C1H3R2WB01#
±0.1pF GCQ1555C1H1R4BB01#
±0.1pF GCQ1555C1H3R2BB01#
±0.25pF GCQ1555C1H1R4CB01#
±0.25pF GCQ1555C1H3R2CB01#
±0.05pF GCQ1555C1H1R5WB01#
3.3pF
±0.05pF GCQ1555C1H3R3WB01#
±0.1pF GCQ1555C1H1R5BB01#
±0.1pF GCQ1555C1H3R3BB01#
±0.25pF GCQ1555C1H1R5CB01#
±0.25pF GCQ1555C1H3R3CB01#
±0.05pF GCQ1555C1H1R6WB01#
3.4pF
±0.05pF GCQ1555C1H3R4WB01#
±0.1pF GCQ1555C1H1R6BB01#
±0.1pF GCQ1555C1H3R4BB01#
±0.25pF GCQ1555C1H1R6CB01#
±0.25pF GCQ1555C1H3R4CB01#
±0.05pF GCQ1555C1H1R7WB01#
3.5pF
±0.05pF GCQ1555C1H1R8WB01#
±0.05pF GCQ1555C1H3R5WB01#
±0.1pF GCQ1555C1H3R5BB01#
±0.25pF GCQ1555C1H3R5CB01#
±0.25pF GCQ1555C1H1R7CB01#
1.9pF
±0.05pF GCQ1555C1H2R9WB01#
±0.1pF GCQ1555C1H1R1BB01#
±0.1pF GCQ1555C1H1R7BB01#
1.8pF
±0.05pF GCQ1555C1H2R8WB01#
±0.1pF GCQ1555C1H2R8BB01#
±0.1pF GCQ1555C1H1R0BB01#
1.2pF
±0.05pF GCQ1555C1H2R7WB01#
±0.1pF GCQ1555C1H2R7BB01#
0.90pF ±0.05pF GCQ1555C1HR90WB01#
±0.05pF GCQ1555C1H1R1WB01#
±0.05pF GCQ1555C1H2R6WB01#
±0.1pF GCQ1555C1H2R6BB01#
±0.1pF GCQ1555C1HR70BB01#
1.1pF
±0.05pF GCQ1555C1H2R5WB01#
±0.1pF GCQ1555C1H2R5BB01#
0.60pF ±0.05pF GCQ1555C1HR60WB01#
±0.05pF GCQ1555C1H1R0WB01#
±0.05pF GCQ1555C1H2R4WB01#
±0.25pF GCQ1555C1H2R4CB01#
0.50pF ±0.05pF GCQ1555C1HR50WB01#
1.0pF
±0.05pF GCQ1555C1H2R3WB01#
±0.1pF GCQ1555C1H2R3BB01#
±0.1pF GCQ1555C1HR40BB01#
±0.1pF GCQ1555C1HR80BB01#
±0.05pF GCQ1555C1H2R2WB01#
±0.25pF GCQ1555C1H2R3CB01#
±0.1pF GCQ1555C1HR30BB01#
0.70pF ±0.05pF GCQ1555C1HR70WB01#
±0.1pF GCQ1555C1H2R1BB01#
±0.1pF GCQ1555C1H2R2BB01#
0.30pF ±0.05pF GCQ1555C1HR30WB01#
±0.1pF GCQ1555C1HR50BB01#
Part Number
±0.25pF GCQ1555C1H2R2CB01#
0.20pF ±0.05pF GCQ1555C1HR20WB01#
0.40pF ±0.05pF GCQ1555C1HR40WB01#
Tol.
±0.25pF GCQ1555C1H2R1CB01#
2.2pF
±0.1pF GCQ1555C1HR10BB01#
±0.1pF GCQ1555C1HR20BB01#
3.6pF
±0.05pF GCQ1555C1H3R6WB01#
±0.1pF GCQ1555C1H1R8BB01#
±0.1pF GCQ1555C1H3R6BB01#
±0.25pF GCQ1555C1H1R8CB01#
±0.25pF GCQ1555C1H3R6CB01#
±0.05pF GCQ1555C1H1R9WB01#
3.7pF
±0.05pF GCQ1555C1H3R7WB01#
±0.1pF GCQ1555C1H1R9BB01#
±0.1pF GCQ1555C1H3R7BB01#
±0.25pF GCQ1555C1H1R9CB01#
±0.25pF GCQ1555C1H3R7CB01#
±0.05pF GCQ1555C1H2R0WB01#
3.8pF
±0.05pF GCQ1555C1H3R8WB01#
±0.1pF GCQ1555C1H2R0BB01#
±0.1pF GCQ1555C1H3R8BB01#
±0.25pF GCQ1555C1H2R0CB01#
±0.25pF GCQ1555C1H3R8CB01#
±0.05pF GCQ1555C1H2R1WB01#
C03E.pdf
Nov. 22,2019
3.9pF
±0.05pF GCQ1555C1H3R9WB01#
Part number # indicates the package specification code.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number List
(→ 1.0×0.5mm)
5.6pF
±0.05pF GCQ1555C1H5R6WB01#
±0.05pF GCQ1555C1H4R0WB01#
±0.1pF GCQ1555C1H5R6BB01#
±0.1pF GCQ1555C1H4R0BB01#
±0.25pF GCQ1555C1H5R6CB01#
4.2pF
±0.05pF GCQ1555C1H4R1WB01#
±0.1pF GCQ1555C1H4R1BB01#
±0.1pF GCQ1555C1H5R7BB01#
±0.25pF GCQ1555C1H5R7CB01#
±0.05pF GCQ1555C1H4R2WB01#
±0.5pF GCQ1555C1H5R7DB01#
5.8pF
±0.1pF GCQ1555C1H5R8BB01#
±0.05pF GCQ1555C1H4R3WB01#
±0.25pF GCQ1555C1H5R8CB01#
±0.25pF GCQ1555C1H4R3CB01#
4.5pF
4.6pF
±0.5pF GCQ1555C1H5R8DB01#
5.9pF
±0.1pF GCQ1555C1H5R9BB01#
±0.1pF GCQ1555C1H4R4BB01#
±0.25pF GCQ1555C1H5R9CB01#
±0.25pF GCQ1555C1H4R4CB01#
±0.5pF GCQ1555C1H5R9DB01#
±0.05pF GCQ1555C1H4R5WB01#
6.0pF
±0.1pF GCQ1555C1H6R0BB01#
±0.25pF GCQ1555C1H4R5CB01#
±0.25pF GCQ1555C1H6R0CB01#
±0.05pF GCQ1555C1H4R6WB01#
±0.5pF GCQ1555C1H6R0DB01#
6.1pF
±0.1pF GCQ1555C1H6R1BB01#
±0.05pF GCQ1555C1H4R7WB01#
±0.25pF GCQ1555C1H6R1CB01#
±0.5pF GCQ1555C1H6R1DB01#
6.2pF
±0.1pF GCQ1555C1H6R2BB01#
±0.1pF GCQ1555C1H4R8BB01#
±0.25pF GCQ1555C1H6R2CB01#
±0.05pF GCQ1555C1H4R9WB01#
±0.5pF GCQ1555C1H6R2DB01#
6.3pF
±0.1pF GCQ1555C1H4R9BB01#
±0.1pF GCQ1555C1H6R3BB01#
±0.25pF GCQ1555C1H6R3CB01#
±0.05pF GCQ1555C1H5R0WB01#
±0.5pF GCQ1555C1H6R3DB01#
6.4pF
±0.1pF GCQ1555C1H6R4BB01#
±0.05pF GCQ1555C1H5R1WB01#
±0.25pF GCQ1555C1H6R4CB01#
±0.1pF GCQ1555C1H5R1BB01#
±0.5pF GCQ1555C1H6R4DB01#
6.5pF
±0.5pF GCQ1555C1H5R1DB01#
±0.1pF GCQ1555C1H6R5BB01#
±0.25pF GCQ1555C1H6R5CB01#
±0.1pF GCQ1555C1H5R2BB01#
±0.5pF GCQ1555C1H6R5DB01#
6.6pF
±0.1pF GCQ1555C1H6R6BB01#
±0.05pF GCQ1555C1H5R3WB01#
±0.25pF GCQ1555C1H6R6CB01#
±0.25pF GCQ1555C1H5R3CB01#
±0.5pF GCQ1555C1H6R6DB01#
6.7pF
±0.05pF GCQ1555C1H6R7WB01#
±0.5pF GCQ1555C1H5R3DB01#
±0.1pF GCQ1555C1H6R7BB01#
±0.05pF GCQ1555C1H5R4WB01#
±0.25pF GCQ1555C1H6R7CB01#
±0.1pF GCQ1555C1H5R4BB01#
±0.25pF GCQ1555C1H5R4CB01#
5.5pF
±0.05pF GCQ1555C1H6R6WB01#
±0.5pF GCQ1555C1H5R2DB01#
±0.1pF GCQ1555C1H5R3BB01#
5.4pF
±0.05pF GCQ1555C1H6R5WB01#
±0.05pF GCQ1555C1H5R2WB01#
±0.25pF GCQ1555C1H5R2CB01#
5.3pF
±0.05pF GCQ1555C1H6R4WB01#
±0.25pF GCQ1555C1H5R0CB01#
±0.25pF GCQ1555C1H5R1CB01#
5.2pF
±0.05pF GCQ1555C1H6R3WB01#
±0.25pF GCQ1555C1H4R9CB01#
±0.1pF GCQ1555C1H5R0BB01#
5.1pF
±0.05pF GCQ1555C1H6R2WB01#
±0.05pF GCQ1555C1H4R8WB01#
±0.25pF GCQ1555C1H4R8CB01#
5.0pF
±0.05pF GCQ1555C1H6R1WB01#
±0.25pF GCQ1555C1H4R6CB01#
±0.1pF GCQ1555C1H4R7BB01#
4.9pF
±0.05pF GCQ1555C1H6R0WB01#
±0.1pF GCQ1555C1H4R5BB01#
±0.25pF GCQ1555C1H4R7CB01#
4.8pF
±0.05pF GCQ1555C1H5R9WB01#
±0.05pF GCQ1555C1H4R4WB01#
±0.1pF GCQ1555C1H4R6BB01#
4.7pF
±0.05pF GCQ1555C1H5R8WB01#
±0.25pF GCQ1555C1H4R2CB01#
±0.1pF GCQ1555C1H4R3BB01#
4.4pF
±0.05pF GCQ1555C1H5R7WB01#
±0.25pF GCQ1555C1H4R1CB01#
±0.1pF GCQ1555C1H4R2BB01#
4.3pF
±0.5pF GCQ1555C1H5R6DB01#
5.7pF
±0.5pF GCQ1555C1H6R7DB01#
6.8pF
±0.05pF GCQ1555C1H6R8WB01#
±0.5pF GCQ1555C1H5R4DB01#
±0.1pF GCQ1555C1H6R8BB01#
±0.05pF GCQ1555C1H5R5WB01#
±0.25pF GCQ1555C1H6R8CB01#
±0.1pF GCQ1555C1H5R5BB01#
±0.25pF GCQ1555C1H5R5CB01#
GCM Series
±0.5pF GCQ1555C1H5R5DB01#
GC3 Series
5.5pF
±0.25pF GCQ1555C1H4R0CB01#
4.1pF
Part Number
GCQ Series
C0G
Tol.
GCD Series
0.55mm 50Vdc
Cap.
GCE Series
±0.25pF GCQ1555C1H3R9CB01#
4.0pF
Rated
TC
Voltage Code
NMF Series
±0.1pF GCQ1555C1H3R9BB01#
T
max.
KCM Series
3.9pF
Part Number
KC3 Series
C0G
Tol.
KCA Series
0.55mm 50Vdc
Cap.
GCG Series
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GCJ Series
GCQ Series Temperature Compensating Type
C03E.pdf
Nov. 22,2019
GRT Series
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
±0.5pF GCQ1555C1H6R8DB01#
6.9pF
±0.05pF GCQ1555C1H6R9WB01#
Part number # indicates the package specification code.
53
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GCQ Series Temperature Compensating Type
GC3 Series
GCJ Series
Part Number List
(→ 1.0×0.5mm)
T
max.
Rated
TC
Voltage Code
0.55mm 50Vdc
C0G
Cap.
6.9pF
Tol.
Part Number
±0.1pF GCQ1555C1H6R9BB01#
±0.25pF GCQ1555C1H6R9CB01#
7.0pF
T
max.
Rated
TC
Voltage Code
0.55mm 50Vdc
C0G
Cap.
±0.5pF GCQ1555C1H8R2DB01#
8.3pF
±0.05pF GCQ1555C1H8R3WB01#
±0.1pF GCQ1555C1H8R3BB01#
±0.05pF GCQ1555C1H7R0WB01#
±0.25pF GCQ1555C1H8R3CB01#
±0.1pF GCQ1555C1H7R0BB01#
±0.5pF GCQ1555C1H8R3DB01#
8.4pF
±0.5pF GCQ1555C1H7R0DB01#
±0.1pF GCQ1555C1H8R4BB01#
±0.25pF GCQ1555C1H8R4CB01#
±0.1pF GCQ1555C1H7R1BB01#
±0.5pF GCQ1555C1H8R4DB01#
8.5pF
±0.1pF GCQ1555C1H8R5BB01#
±0.05pF GCQ1555C1H7R2WB01#
±0.25pF GCQ1555C1H8R5CB01#
GCQ Series
GCD Series
GCE Series
±0.1pF GCQ1555C1H8R6BB01#
±0.25pF GCQ1555C1H8R6CB01#
±0.1pF GCQ1555C1H7R3BB01#
±0.5pF GCQ1555C1H8R6DB01#
±0.1pF GCQ1555C1H8R7BB01#
±0.25pF GCQ1555C1H8R7CB01#
NMF Series
KCM Series
KC3 Series
KCA Series
±0.5pF GCQ1555C1H8R7DB01#
8.8pF
±0.5pF GCQ1555C1H7R4DB01#
±0.1pF GCQ1555C1H8R8BB01#
±0.25pF GCQ1555C1H8R8CB01#
±0.5pF GCQ1555C1H8R8DB01#
8.9pF
±0.1pF GCQ1555C1H8R9BB01#
±0.05pF GCQ1555C1H7R6WB01#
±0.25pF GCQ1555C1H8R9CB01#
±0.25pF GCQ1555C1H7R6CB01#
±0.5pF GCQ1555C1H8R9DB01#
9.0pF
±0.5pF GCQ1555C1H7R6DB01#
±0.1pF GCQ1555C1H9R0BB01#
±0.25pF GCQ1555C1H9R0CB01#
±0.1pF GCQ1555C1H7R7BB01#
±0.5pF GCQ1555C1H9R0DB01#
9.1pF
±0.5pF GCQ1555C1H7R7DB01#
±0.1pF GCQ1555C1H9R1BB01#
±0.25pF GCQ1555C1H9R1CB01#
±0.1pF GCQ1555C1H7R8BB01#
±0.5pF GCQ1555C1H9R1DB01#
9.2pF
±0.5pF GCQ1555C1H7R8DB01#
±0.1pF GCQ1555C1H9R2BB01#
±0.25pF GCQ1555C1H9R2CB01#
±0.1pF GCQ1555C1H7R9BB01#
±0.5pF GCQ1555C1H9R2DB01#
9.3pF
±0.05pF GCQ1555C1H9R3WB01#
±0.5pF GCQ1555C1H7R9DB01#
±0.1pF GCQ1555C1H9R3BB01#
±0.05pF GCQ1555C1H8R0WB01#
±0.25pF GCQ1555C1H9R3CB01#
±0.1pF GCQ1555C1H8R0BB01#
±0.25pF GCQ1555C1H8R0CB01#
±0.5pF GCQ1555C1H9R3DB01#
9.4pF
±0.05pF GCQ1555C1H9R4WB01#
±0.5pF GCQ1555C1H8R0DB01#
±0.1pF GCQ1555C1H9R4BB01#
±0.05pF GCQ1555C1H8R1WB01#
±0.25pF GCQ1555C1H9R4CB01#
±0.1pF GCQ1555C1H8R1BB01#
±0.25pF GCQ1555C1H8R1CB01#
8.2pF
±0.05pF GCQ1555C1H9R2WB01#
±0.05pF GCQ1555C1H7R9WB01#
±0.25pF GCQ1555C1H7R9CB01#
8.1pF
±0.05pF GCQ1555C1H9R1WB01#
±0.05pF GCQ1555C1H7R8WB01#
±0.25pF GCQ1555C1H7R8CB01#
7.9pF
±0.05pF GCQ1555C1H9R0WB01#
±0.05pF GCQ1555C1H7R7WB01#
±0.25pF GCQ1555C1H7R7CB01#
7.8pF
±0.05pF GCQ1555C1H8R9WB01#
±0.5pF GCQ1555C1H7R5DB01#
±0.1pF GCQ1555C1H7R6BB01#
7.7pF
±0.05pF GCQ1555C1H8R8WB01#
±0.05pF GCQ1555C1H7R5WB01#
±0.1pF GCQ1555C1H7R5BB01#
7.6pF
±0.05pF GCQ1555C1H8R7WB01#
±0.05pF GCQ1555C1H7R4WB01#
±0.1pF GCQ1555C1H7R4BB01#
8.0pF
GCG Series
8.7pF
±0.5pF GCQ1555C1H7R3DB01#
±0.25pF GCQ1555C1H7R4CB01#
7.5pF
±0.05pF GCQ1555C1H8R6WB01#
±0.5pF GCQ1555C1H7R2DB01#
±0.25pF GCQ1555C1H7R5CB01#
!Caution/
Notice
±0.5pF GCQ1555C1H8R5DB01#
8.6pF
±0.05pF GCQ1555C1H7R3WB01#
±0.25pF GCQ1555C1H7R3CB01#
7.4pF
±0.05pF GCQ1555C1H8R5WB01#
±0.5pF GCQ1555C1H7R1DB01#
±0.25pF GCQ1555C1H7R2CB01#
7.3pF
±0.05pF GCQ1555C1H8R4WB01#
±0.05pF GCQ1555C1H7R1WB01#
±0.25pF GCQ1555C1H7R1CB01#
7.2pF
Part Number
±0.5pF GCQ1555C1H6R9DB01#
±0.25pF GCQ1555C1H7R0CB01#
7.1pF
Tol.
8.2pF
±0.1pF GCQ1555C1H7R2BB01#
±0.5pF GCQ1555C1H9R4DB01#
9.5pF
±0.05pF GCQ1555C1H9R5WB01#
±0.5pF GCQ1555C1H8R1DB01#
±0.1pF GCQ1555C1H9R5BB01#
±0.05pF GCQ1555C1H8R2WB01#
±0.25pF GCQ1555C1H9R5CB01#
±0.1pF GCQ1555C1H8R2BB01#
±0.25pF GCQ1555C1H8R2CB01#
54
C03E.pdf
Nov. 22,2019
±0.5pF GCQ1555C1H9R5DB01#
9.6pF
±0.05pF GCQ1555C1H9R6WB01#
Part number # indicates the package specification code.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number List
(→ 1.0×0.5mm)
±0.1pF GCQ1555C1H9R6BB01#
±0.25pF GCQ1555C1H9R6CB01#
9.7pF
T
max.
Rated
TC
Voltage Code
0.55mm 50Vdc
C0G
Cap.
Tol.
Part Number
43pF
±5%
GCQ1555C1H430JB01#
47pF
±1%
GCQ1555C1H470FB01#
±0.5pF GCQ1555C1H9R6DB01#
±2%
GCQ1555C1H470GB01#
±0.05pF GCQ1555C1H9R7WB01#
±5%
GCQ1555C1H470JB01#
GC3 Series
9.6pF
Part Number
±0.1pF GCQ1555C1H9R7BB01#
±0.25pF GCQ1555C1H9R7CB01#
±0.5pF GCQ1555C1H9R7DB01#
9.8pF
±0.05pF GCQ1555C1H9R8WB01#
GCJ Series
±0.1pF GCQ1555C1H9R8BB01#
±0.25pF GCQ1555C1H9R8CB01#
±0.5pF GCQ1555C1H9R8DB01#
9.9pF
±0.05pF GCQ1555C1H9R9WB01#
GCQ Series
±0.1pF GCQ1555C1H9R9BB01#
±0.25pF GCQ1555C1H9R9CB01#
±2%
GCQ1555C1H110GB01#
±5%
GCQ1555C1H110JB01#
±2%
GCQ1555C1H120GB01#
±5%
GCQ1555C1H120JB01#
13pF
±2%
GCQ1555C1H130GB01#
±5%
GCQ1555C1H130JB01#
15pF
±2%
GCQ1555C1H150GB01#
±5%
GCQ1555C1H150JB01#
±2%
GCQ1555C1H160GB01#
±5%
GCQ1555C1H160JB01#
±2%
GCQ1555C1H180GB01#
±5%
GCQ1555C1H180JB01#
±2%
GCQ1555C1H200GB01#
±5%
GCQ1555C1H200JB01#
±1%
GCQ1555C1H220FB01#
±2%
GCQ1555C1H220GB01#
±5%
GCQ1555C1H220JB01#
±1%
GCQ1555C1H240FB01#
±2%
GCQ1555C1H240GB01#
±5%
GCQ1555C1H240JB01#
±1%
GCQ1555C1H270FB01#
±2%
GCQ1555C1H270GB01#
±5%
GCQ1555C1H270JB01#
±1%
GCQ1555C1H300FB01#
±2%
GCQ1555C1H300GB01#
±5%
GCQ1555C1H300JB01#
±1%
GCQ1555C1H330FB01#
±2%
GCQ1555C1H330GB01#
±5%
GCQ1555C1H330JB01#
±1%
GCQ1555C1H360FB01#
±2%
GCQ1555C1H360GB01#
11pF
12pF
16pF
18pF
20pF
22pF
24pF
27pF
30pF
33pF
36pF
39pF
43pF
±5%
GCQ1555C1H360JB01#
±1%
GCQ1555C1H390FB01#
±2%
GCQ1555C1H390GB01#
±5%
GCQ1555C1H390JB01#
±1%
GCQ1555C1H430FB01#
±2%
GCQ1555C1H430GB01#
GCE Series
GCQ1555C1H100JB01#
NMF Series
GCQ1555C1H100GB01#
±5%
KCM Series
±2%
GCD Series
±0.5pF GCQ1555C1H9R9DB01#
10pF
KC3 Series
C0G
Tol.
KCA Series
0.55mm 50Vdc
Cap.
GCG Series
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GCM Series
GCQ Series Temperature Compensating Type
C03E.pdf
Nov. 22,2019
GRT Series
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Part number # indicates the package specification code.
55
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GCD Series
Features
1
Prevents momentary dielectric breakdown by a 2-element array structure!
This product consists of 2 elements arranged in 1 capacitor. It is structured so that even when 1 element is shorted,
the other capacitor element will not short.
GCJ Series
GC3 Series
WEB
Prevents momentary dielectric breakdown by a 2-element array structure!
Internal Electrodes
Ceramic
GCQ Series
GCD Series
GCE Series
NMF Series
KCM Series
KC3 Series
KCA Series
GCG Series
!Caution/
Notice
56
C03E.pdf
Nov. 22,2019
MLSC Design Chip Multilayer Ceramic Capacitors for Automotive
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ni/Sn Plated Layer
Foundation Electrode Layer
2-element Array Arrangement
2
This AEC-Q200 conforming product is ideal for the battery lines of automotive.
Space can be reduced in battery lines where 2 capacitors are arranged in an array.
Specifications
Size
1.6×0.8mm to 2.0×1.25mm
Rated Voltage
16Vdc to 100Vdc
Capacitance
1000pF to 0.50µF
Main Applications
Battery Lines and Powertrains for automotive
e
g
e
T
L
W
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
T
max.
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
1.4mm
Rated
TC
Voltage Code
50Vdc
Cap.
Tol.
Part Number
X7R 33000pF ±10% GCD21BR71H333KA01#
39000pF ±10% GCD21BR71H393KA01#
0.9mm 100Vdc X7R 1000pF
±10% GCD188R72A102KA01#
47000pF ±10% GCD21BR71H473KA01#
1200pF
±10% GCD188R72A122KA01#
56000pF ±10% GCD21BR71H563KA01#
1500pF
±10% GCD188R72A152KA01#
68000pF ±10% GCD21BR71H683KA01#
1800pF
±10% GCD188R72A182KA01#
82000pF ±10% GCD21BR71H823KA01#
2200pF
±10% GCD188R72A222KA01#
2700pF
±10% GCD188R72A272KA01#
3300pF
±10% GCD188R72A332KA01#
3900pF
±10% GCD188R72A392KA01#
4700pF
±10% GCD188R72A472KA01#
5600pF
±10% GCD188R72A562KA01#
6800pF
±10% GCD188R72A682KA01#
8200pF
±10% GCD188R72A822KA01#
0.10μF
±10% GCD21BR71H104KA01#
0.47μF
±10% GCD21BC71C474KE01#
GCJ Series
X7S
GCQ Series
16Vdc
GCM Series
T
max.
1.6×0.8mm
Part Number List
GC3 Series
GCD Series High Dielectric Constant Type
C03E.pdf
Nov. 22,2019
GRT Series
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
10000pF ±10% GCD188R72A103KA01#
12000pF ±10% GCD188R72A123KA01#
15000pF ±10% GCD188R72A153KA01#
GCD Series
18000pF ±10% GCD188R72A183KA01#
±10% GCD188R71H122KA01#
1500pF
±10% GCD188R71H152KA01#
1800pF
±10% GCD188R71H182KA01#
2200pF
±10% GCD188R71H222KA01#
2700pF
±10% GCD188R71H272KA01#
3300pF
±10% GCD188R71H332KA01#
3900pF
±10% GCD188R71H392KA01#
4700pF
±10% GCD188R71H472KA01#
5600pF
±10% GCD188R71H562KA01#
6800pF
±10% GCD188R71H682KA01#
8200pF
±10% GCD188R71H822KA01#
NMF Series
±10% GCD188R71H102KA01#
1200pF
KCM Series
X7R 1000pF
GCE Series
22000pF ±10% GCD188R72A223KA01#
50Vdc
10000pF ±10% GCD188R71H103KA01#
12000pF ±10% GCD188R71H123KA01#
15000pF ±10% GCD188R71H153KA01#
18000pF ±10% GCD188R71H183KA01#
KC3 Series
22000pF ±10% GCD188R71H223KA01#
25Vdc
X7R 27000pF ±10% GCD188R71E273KA01#
33000pF ±10% GCD188R71E333KA01#
39000pF ±10% GCD188R71E393KA01#
KCA Series
47000pF ±10% GCD188R71E473KA01#
2.0×1.25mm
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
GCG Series
T
max.
1.4mm 100Vdc X7R 27000pF ±10% GCD21BR72A273KA01#
33000pF ±10% GCD21BR72A333KA01#
39000pF ±10% GCD21BR72A393KA01#
!Caution
/Notice
47000pF ±10% GCD21BR72A473KA01#
56000pF ±10% GCD21BR72A563KA01#
68000pF ±10% GCD21BR72A683KA01#
82000pF ±10% GCD21BR72A823KA01#
0.10μF
50Vdc
±10% GCD21BR72A104KA01#
X7R 27000pF ±10% GCD21BR71H273KA01#
Part number # indicates the package specification code.
57
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GCE Series
WEB
Further improved safety performance with a combination of a 2-element array
structure & resin external electrodes!
Features
1
Avoid instantaneous dielectric breakdown with the 2-element array structure
This product is configured with 2 elements arranged in one capacitor. Even if one element short circuits, the other
element in the capacitor does not short.
GCJ Series
GC3 Series
Nov. 22,2019
Soft Termination MLSC Design Chip Multilayer Ceramic Capacitors for Automotive
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Internal Electrodes
Ceramic
Resin Electrodes Layer
GCQ Series
Ni/Sn Plated Layer
Foundation Electrode Layer
2
Provides additional safety performance in combination with resin electrodes
Adopting resin electrodes as the external electrodes will suppress the occurrence of cracking in the capacitor by
mechanical stress.
oFor Automotive (GCM Series)
NMF Series
GCE Series
GCD Series
2-element Array Arrangement
Occurrence of cracking on
edge of terminal electrode
KCA Series
KC3 Series
KCM Series
oFail Safe Design (GCE Series)
Conductive resin layer relieves
the mechanical stress of the ceramic
Separated foundation
electrode and resin electrode
Note: Cracks may occur in the capacitor body if excessive stress beyond the "guaranteed range of board bending strength (*) " provided in
the specifications is applied. Capacitors with cracks in them may cause a drop in insulation resistance, which could lead to a short circuit.
(*) For details on the guaranteed range of board bending strength, check the "Detailed Specification Sheet" on the Product Details Page.
3
Ideal for battery lines of on-board applications
!Caution/
Notice
GCG Series
Space can be reduced for battery lines, when 2 capacitors are configured in an array.
Specifications
Size
Rated Voltage
25Vdc to 100Vdc
Capacitance
220pF to 0.10µF
Main Applications
58
1.6×0.8mm to 2.0×1.25mm
For automotive, Battery lines, power trains
e
g
e
T
L
W
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
T
max.
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
Rated
TC
Voltage Code
1.45mm 50Vdc
Cap.
Tol.
Part Number
X7R 33000pF ±10% GCE21BR71H333KA01#
39000pF ±10% GCE21BR71H393KA01#
0.9mm 100Vdc X7R 1000pF
±10% GCE188R72A102KA01#
47000pF ±10% GCE21BR71H473KA01#
1200pF
±10% GCE188R72A122KA01#
56000pF ±10% GCE21BR71H563KA01#
1500pF
±10% GCE188R72A152KA01#
68000pF ±10% GCE21BR71H683KA01#
1800pF
±10% GCE188R72A182KA01#
82000pF ±10% GCE21BR71H823KA01#
2200pF
±10% GCE188R72A222KA01#
2700pF
±10% GCE188R72A272KA01#
3300pF
±10% GCE188R72A332KA01#
3900pF
±10% GCE188R72A392KA01#
4700pF
±10% GCE188R72A472KA01#
5600pF
±10% GCE188R72A562KA01#
6800pF
±10% GCE188R72A682KA01#
8200pF
±10% GCE188R72A822KA01#
±10% GCE21BR71H104KA01#
GCQ Series
GCJ Series
0.10μF
GCM Series
T
max.
1.6×0.8mm
Part Number List
GC3 Series
GCE Series High Dielectric Constant Type
C03E.pdf
Nov. 22,2019
GRT Series
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
10000pF ±10% GCE188R72A103KA01#
12000pF ±10% GCE188R72A123KA01#
15000pF ±10% GCE188R72A153KA01#
GCD Series
18000pF ±10% GCE188R72A183KA01#
±10% GCE188R71H122KA01#
1500pF
±10% GCE188R71H152KA01#
1800pF
±10% GCE188R71H182KA01#
2200pF
±10% GCE188R71H222KA01#
2700pF
±10% GCE188R71H272KA01#
3300pF
±10% GCE188R71H332KA01#
3900pF
±10% GCE188R71H392KA01#
4700pF
±10% GCE188R71H472KA01#
5600pF
±10% GCE188R71H562KA01#
6800pF
±10% GCE188R71H682KA01#
8200pF
±10% GCE188R71H822KA01#
NMF Series
±10% GCE188R71H102KA01#
1200pF
KCM Series
X7R 1000pF
GCE Series
22000pF ±10% GCE188R72A223KA01#
50Vdc
10000pF ±10% GCE188R71H103KA01#
12000pF ±10% GCE188R71H123KA01#
15000pF ±10% GCE188R71H153KA01#
18000pF ±10% GCE188R71H183KA01#
KC3 Series
22000pF ±10% GCE188R71H223KA01#
25Vdc
X7R 27000pF ±10% GCE188R71E273KA01#
33000pF ±10% GCE188R71E333KA01#
39000pF ±10% GCE188R71E393KA01#
KCA Series
47000pF ±10% GCE188R71E473KA01#
2.0×1.25mm
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
GCG Series
T
max.
1.45mm 100Vdc X7R 27000pF ±10% GCE21BR72A273KA01#
33000pF ±10% GCE21BR72A333KA01#
39000pF ±10% GCE21BR72A393KA01#
!Caution
/Notice
47000pF ±10% GCE21BR72A473KA01#
56000pF ±10% GCE21BR72A563KA01#
68000pF ±10% GCE21BR72A683KA01#
82000pF ±10% GCE21BR72A823KA01#
0.10μF
50Vdc
±10% GCE21BR72A104KA01#
X7R 27000pF ±10% GCE21BR71H273KA01#
Part number # indicates the package specification code.
59
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
NFM Series
WEB
This is the most suitable Low ESL capacitors for noise measurement and power
decoupling of power train and safety equipment.
Features
1
Low ESL
Since the equivalent series inductance (ESL) is low and excellent in high frequency characteristics, this capacitor is
suitable for power supply decoupling of high-speed operation electronic equipment.
GCJ Series
GC3 Series
Nov. 22,2019
3 Terminals Low ESL Chip Multilayer Ceramic Capacitors for Automotive
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Realizes Ultra low ESL by using a extremely
shorter high frequency current path
GCQ Series
• 2-terminal Capacitor
HOT
Current
GCD Series
GND
g long current distance
g Narrow wiring width
• 3-terminal capacitor
n Short current distance
Current
HOT
n Wide wiring width
GND
2
KCM Series
KC3 Series
KCA Series
GCG Series
4
!Caution/
Notice
Before
After
Application IC
Application IC
Reduction of
68 components
3
60
Contributes to a reduction in the number of components.
The number of components can be reduced by using low ESL capacitors, while maintaining functions equivalent to
2-terminal capacitor.
NMF Series
GCE Series
n Four routes formed in parallel
2-terminal capacitor
3-terminal capacitor
100pcs
32pcs
Contributes to noise suppression
Example of noise suppression effect WEB
Compliance with AEC-Q200
Use of 3-terminal low-ESL chip multilayer ceramic capacitors to decouple processor power supplies has recently
surged in the automotive market due to demand for high performance processors and smaller electronics.
This has accompanied the increase in high-functioning multitasking onboard equipment such as advanced driver
assistance systems (ADAS), preventative safety systems for automated vehicles, and in-vehicle infotainment (IVI)
systems.
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications
3
g
W
1
3
GCE Series
GCD Series
GCQ Series
GCJ Series
GC3 Series
2
NMF Series
Safety equipment, Drive system control, Information and Comfort equipment
2
i
L
KCM Series
220pF to 1.0µF
e
T
KC3 Series
Main Applications
6.3Vdc to 100Vdc
2
j
KCA Series
Capacitance
1
GCG Series
Rated Voltage
1.6×0.8mm to 3.2×1.6mm
!Caution
/Notice
Size
GCM Series
GRT Series
Nov. 22,2019
61
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
NFM Series
GCD Series
GCE Series
Part Number List
T
max.
0.7mm
Rated
Voltage
Cap.
Tol.
Part Number
16Vdc
1.0μF
±20%
NFM18HC105C1C3#
6.3Vdc
1.0μF
±20%
NFM18HC105C0J3#
Cap.
Tol.
2.0×1.25mm
T
max.
Rated
Voltage
0.95mm
50Vdc
Part Number
220pF
±20%
NFM21HC221R1H3#
470pF
±20%
NFM21HC471R1H3#
1000pF
±20%
NFM21HC102R1H3#
2200pF
±20%
NFM21HC222R1H3#
22000pF
±20%
NFM21HC223R1H3#
16Vdc
1.0μF
±20%
NFM21HC105R1C3#
10Vdc
0.10μF
±20%
NFM21HC104R1A3#
0.22μF
±20%
NFM21HC224R1A3#
0.47μF
±20%
NFM21HC474R1A3#
Cap.
Tol.
3.2×1.6mm
T
max.
1.5mm
Rated
Voltage
100Vdc 10000pF
50Vdc
±20%
Part Number
NFM31HK103R2A3#
10000pF
±20%
NFM31HK103R1H3#
15000pF
±20%
NFM31HK153R1H3#
22000pF
±20%
NFM31HK223R1H3#
0.10μF
±20%
NFM31HK104R1H3#
!Caution/
Notice
GCG Series
KCA Series
KC3 Series
KCM Series
NMF Series
C03E.pdf
Nov. 22,2019
1.6×0.8mm
GCQ Series
GCJ Series
GC3 Series
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
62
Part number # indicates the package specification code.
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRT Series
Nov. 22,2019
Metal Terminal Type Multilayer Ceramic Capacitors for Automotive
KCM Series
GCM Series
WEB
GC3 Series
Bonding the metal terminals to external electrodes solves design issues by
mounting large size MLCC!
Features
1
Bond metal terminals to the external electrodes of chips.
Internal Electrode
Ceramic
Noise
Board Deflection Cracks
GCJ Series
The stress applied to the chip is relieved by the elastic action of the metal terminal.
Lead-free High
Temperature
Solder
Solder Cracks
GCQ Series
Metal Terminal
Cracks from mechanical stress to boards and noise
from vibration of the capacitors are design issues.
100
Residual Ratio (%)
Reduced
about 30dB!
60
40
20
0
oReduces Stress Caused by Board Deflection
Metal Terminal Type
(5750(in mm)/2220(in inch)
/630V/220nF)
80
60
Chip Capacitor
(5750(in mm)/2220(in inch)
/630V/220nF)
40
20
Chip Capacitor
Metal Terminal Type
No damage,
even with 6 mm
board deflection!!
0
0.0
1.0
2.0
3.0
4.0
5.0
Amount of Board Deflection (mm)
6.0
KC3 Series
Evaluation Items: 5750 (in mm)/2220 (in inch) size/DC630V/220nF
Test Method: DC50V, AC10Vp-p/3kHz
Test Board: Glass Epoxy Board (T=1.6mm)
Test Quantity: 3pc
Distance Between Microphone and Board: 5mm
Note: Results Using Murata’s Evaluation Board
Metal Terminal Type
(5750 (in mm)/2220 (in inch) size)
GCG Series
Chip Only
(5750 (in mm)/2220 (in inch) size)
KCA Series
oSuppresses Solder Cracks Caused by Heat Stress
Chip Size
1000 Cycles
Solder Crack
2000 Cycles
Solder Crack
GCE Series
80
Compared with chips only,
this product is excellent
in solder cracking resistance.
!Caution
/Notice
oComparison of Noise Reduction Effects
NMF Series
This product is not damaged even with a board deflection of 6 mm.
Solder cracks do not occur even with 2,000 cycles of heat stress.
KCM Series
Substantially reduces noise, board deflection cracks and soldering cracks.
Sound Pressure Level (dB)
2
GCD Series
Reduces stress by the elastic action of the metal terminals!
Test Condition: -55 to +125°C, 5min., (Liquid Phase)
Board Used: Glass Epoxy Board (FR-4)
63
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
3
2 chips can be stacked.
Realize large capacity by stacking 2 capacitors.
Specifications
!Caution/
Notice
GCG Series
KCA Series
KC3 Series
KCM Series
NMF Series
GCE Series
GCD Series
GCQ Series
GCJ Series
GC3 Series
Size
64
6.1×5.1mm to 6.1×5.3mm
Rated Voltage
25Vdc to 630Vdc
Capacitance
0.015µF to 100µF
Main Applications
For drive system control of engine ECU
For other drive system controls and safety devices
T
e
L
W
C03E.pdf
Nov. 22,2019
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
KCM Series Temperature Compensating Type
C03E.pdf
Nov. 22,2019
Part Number List
±5%
KCM55R5C2J273JDL1#
5.1mm 630Vdc C0G 0.030μF
±5%
KCM55T5C2J303JDL1#
0.036μF
±5%
KCM55T5C2J363JDL1#
6.6mm 630Vdc C0G 0.044μF
±5%
KCM55V5C2J443JDL2#
0.054μF
±5%
KCM55V5C2J543JDL2#
GCJ Series
KCM55R5C2J223JDL1#
0.027μF
GCQ Series
±5%
GCD Series
KCM55L5C2J183JDL1#
3.9mm 630Vdc C0G 0.022μF
GCE Series
KCM55L5C2J153JDL1#
±5%
NMF Series
±5%
0.018μF
KCM Series
3.1mm 630Vdc C0G 0.015μF
GC3 Series
Part Number
KC3 Series
Tol.
KCA Series
Cap.
GCG Series
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GCM Series
6.1×5.1mm
GRT Series
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Part number # indicates the package specification code.
65
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
KCM Series High Dielectric Constant Type
T
max.
Rated
TC
Voltage Code
Cap.
3.0mm 100Vdc X7R
GCJ Series
Tol.
Part Number
4.7μF
±10% KCM55LR72A475KH01#
63Vdc
X7R
4.7μF
±10% KCM55LR71J475KH01#
50Vdc
X7R
4.7μF
±10% KCM55LR71H475KH01#
10μF
±10% KCM55LR71H106KH01#
10μF
±10% KCM55LR7YA106KH01#
15μF
±10% KCM55LR7YA156KH01#
X7R
15μF
±10% KCM55LR71E156KH01#
3.9mm 100Vdc X7R
6.8μF
±10% KCM55QR72A685KH01#
10μF
±10% KCM55QR72A106KH01#
35Vdc
25Vdc
GCQ Series
GCD Series
GCE Series
Part Number List
X7R
63Vdc
X7R
10μF
±10% KCM55QR71J106KH01#
50Vdc
X7R
17μF
±10% KCM55QR71H176KH01#
35Vdc
X7R
17μF
±10% KCM55QR7YA176KH01#
22μF
±10% KCM55QR7YA226KH01#
22μF
±10% KCM55QR71E226KH01#
33μF
±10% KCM55QR71E336KH01#
25Vdc
X7R
X7S
47μF
±10% KCM55QC71E476KH13#
50Vdc
X7R
22μF
±20% KCM55TR71H226MH01#
35Vdc
X7R
33μF
±20% KCM55TR7YA336MH01#
6.7mm 100Vdc X7R
15μF
±20% KCM55WR72A156MH01#
22μF
±20% KCM55WR72A226MH01#
5.0mm
63Vdc
X7R
22μF
±20% KCM55WR71J226MH01#
50Vdc
X7R
33μF
±20% KCM55WR71H336MH01#
35Vdc
X7R
47μF
±20% KCM55WR7YA476MH01#
25Vdc
X7R
47μF
±20% KCM55WR71E476MH01#
68μF
±20% KCM55WR71E686MH01#
100μF
±20% KCM55WC71E107MH13#
X7S
!Caution/
Notice
GCG Series
KCA Series
KC3 Series
KCM Series
NMF Series
C03E.pdf
Nov. 22,2019
6.1×5.3mm
GC3 Series
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
66
Part number # indicates the package specification code.
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Effective Capacitance & High Allowable Ripple Current Metal Terminal Type Multilayer Ceramic Capacitors for Automotive
KC3 Series
GCM Series
WEB
Features
Bond Metal Terminals to External Electrodes of Chips
This product has high resistance to heat and mechanical impact and greatly reduces acoustic noise of boards by
ceramics.
Internal Electrode
GCQ Series
Lead-free High
Temperature
Solder
Metal Terminal
GCD Series
Cracks from mechanical stress to boards and noise
from vibration of the capacitors are design issues.
Reduces stress by the elastic action of the metal terminals!
Stacking of Chips
Achieve high capacity by stacking 2 capacitors.
oComparison of Noise Reduction Effects
80
100
Reduced
about 30dB!
60
40
20
0
oReduces Stress Caused by Board Deflection
Residual Ratio (%)
Sound Pressure Level (dB)
Metal Terminal Type
(5750(in mm)/2220(in inch)
/630V/220nF)
80
60
Chip Capacitor
(5750(in mm)/2220(in inch)
/630V/220nF)
40
20
Chip Capacitor
Metal Terminal Type
No damage,
even with 6 mm
board deflection!!
0
0.0
1.0
2.0
3.0
4.0
5.0
Amount of Board Deflection (mm)
6.0
KC3 Series
Evaluation Items: 5750 (in mm)/2220 (in inch) size/DC630V/220nF
Test Method: DC50V, AC10Vp-p/3kHz
Test Board: Glass Epoxy Board (T=1.6mm)
Test Quantity: 3pc
Distance Between Microphone and Board: 5mm
Note: Results Using Murata’s Evaluation Board
Chip Size
Chip Only
(5750 (in mm)/2220 (in inch) size)
KCA Series
oSuppresses Solder Cracks Caused by Heat Stress
Metal Terminal Type
(5750 (in mm)/2220 (in inch) size)
GCG Series
2
1000 Cycles
Solder Crack
2000 Cycles
Solder Crack
GCE Series
Solder Cracks
NMF Series
Board Deflection Cracks
Compared with chips only,
this product is excellent
in solder crackingresistance.
!Caution
/Notice
Noise
KCM Series
Ceramic
GCJ Series
GC3 Series
Bonding the metal terminals to external electrodes solves design issues by
mounting large size MLCC!
1
GRT Series
Nov. 22,2019
Test Condition: -55 to +125°C, 5min., (Liquid Phase)
Board Used: Glass Epoxy Board (FR-4)
67
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
3
20
Cap. Change (%)
GC3 Series
-20
-40
-60
-80
-100
GCJ Series
GCQ Series
GCD Series
GCE Series
NMF Series
KCM Series
KC3 Series
KCA Series
GCG Series
!Caution/
Notice
New Material
(250V/1µF/X7T)
Conventional Material
(250V/1µF/X7R)
0
4
68
Adopted Low Dielectric Constant Materials
Improved effective capacity and ripple resistant performance, compared to conventional products
(X7R characteristics).
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
0
50
100
150
DC Bias (V)
200
250
2 chips can be stacked
Realize large capacity by stacking 2 capacitors.
Specifications
Size
Rated Voltage
Capacitance
Main Applications
6.1×5.3mm
T
250Vdc to 630Vdc
0.10µF to 2.2µF
For drive system control of engine ECU
For other drive system controls and safety devices
e
L
W
C03E.pdf
Nov. 22,2019
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
KC3 Series High Dielectric Constant Type
C03E.pdf
Nov. 22,2019
Part Number List
5.0mm 630Vdc X7T
450Vdc X7T
250Vdc X7T
6.7mm 630Vdc X7T
450Vdc X7T
250Vdc X7T
0.47μF
±10% KC355LD72W474KH01#
0.68μF
±10% KC355LD7LP684KV01#
0.47μF
±10% KC355LD72E474KH01#
0.68μF
±10% KC355LD72E684KH01#
0.22μF
±10% KC355QD72J224KH01#
0.27μF
±10% KC355QD72J274KH01#
0.56μF
±10% KC355QD7LQ564KV01#
0.56μF
±10% KC355QD72W564KH01#
1.0μF
±10% KC355QD7LP105KV01#
1.0μF
±10% KC355QD72E105KH01#
0.68μF
±20% KC355TD7LQ684MV01#
1.0μF
±20% KC355TD7LQ105MV01#
0.68μF
±20% KC355TD72W684MH01#
1.0μF
±20% KC355TD72W105MH01#
1.5μF
±20% KC355TD7LP155MV01#
1.5μF
±20% KC355TD72E155MH01#
0.47μF
±20% KC355WD72J474MH01#
0.56μF
±20% KC355WD72J564MH01#
1.2μF
±20% KC355WD7LQ125MV01#
1.2μF
±20% KC355WD72W125MH01#
2.2μF
±20% KC355WD7LP225MV01#
2.2μF
±20% KC355WD72E225MH01#
GC3 Series
±10% KC355LD72W224KH01#
±10% KC355LD72W334KH01#
GCJ Series
0.22μF
0.33μF
GCQ Series
±10% KC355LD7LQ334KV01#
±10% KC355LD7LQ474KV01#
GCD Series
250Vdc X7T
0.33μF
0.47μF
GCE Series
450Vdc X7T
±10% KC355LD72J104KH01#
±10% KC355LD72J154KH01#
NMF Series
3.9mm 630Vdc X7T
0.10μF
0.15μF
KCM Series
250Vdc X7T
Part Number
KC3 Series
450Vdc X7T
Tol.
KCA Series
3.0mm 630Vdc X7T
Cap.
GCG Series
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GCM Series
6.1×5.3mm
GRT Series
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Part number # indicates the package specification code.
69
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Safety Standard Certified Metal Terminal Type Multilayer Ceramic Capacitors for Automotive
KCA Series
WEB
For Automotive IEC60384-14 X1/Y2 Class Certified Product (Basic insulation
product)
Features
1
IEC60384-14 certified product: Rated voltage AC250V (r.m.s.).
Please down load Safety Standard Certification (Type MF: X1,Y2) from Web site.
2
Best suitable for class Y2 capacitors.
AC250V (r.m.s.)-rated voltage, withstand voltage of AC2000V (r.m.s.) guaranteed for 60 seconds.
GCQ Series
GCJ Series
GC3 Series
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
oOBC (On Board Charger)
100 to 220Vr.m.s.
100 to 400Vd.c.
C3
C3
C1
Controller
3
C1
Y Cap (Primary)
C2
Primary-Secondary Coupling
C3
Y Cap (Secondary)
DC630V-rated voltage, withstand voltage of DC2700V guaranteed for 60 seconds.
oInverter
IGBT
100 to 400Vd.c.
C1
Induction
Motor
C1
KC3 Series
KCA Series
GCG Series
!Caution/
Notice
Application
Best suitable for DC input common mode noise filters.
No.
Application
C1
Common mode noise filters
No.
Application
C1
Common mode noise filters
C2
Primary-Secondary Coupling
Driver
oDC-DC Converter
C1
70
No.
C2
KCM Series
NMF Series
GCE Series
GCD Series
C1
C1
C2
Controller
C03E.pdf
Nov. 22,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
4
Bond metal terminals to the external electrodes of chips.
The stress applied to the chip is relieved by the elastic action of the metal terminal.
Noise
Board Deflection Cracks
Internal Electrode
Lead-free High
Temperature
Solder
Solder Cracks
GCM Series
Ceramic
Metal Terminal
GC3 Series
Cracks from mechanical stress to boards and noise
from vibration of the capacitors are design issues.
Reduces stress by the elastic action of the metal terminals!
Substantially reduces board deflection cracks and soldering cracks.
GCJ Series
5
This product is not damaged even with a board deflection of 6 mm.
Solder cracks do not occur even with 2,000 cycles of heat stress.
GCD Series
80
No damage,
even with 6 mm
board deflection!!
60
Chip Capacitor
(5750(in mm)/2220(in inch)
/630V)
40
20
0
0.0
1.0
2.0
3.0
4.0
5.0
Amount of Board Deflection (mm)
GCE Series
Residual Ratio (%)
Metal Terminal Type
(5750(in mm)/2220(in inch)
/630V)
GCQ Series
oReduces Stress Caused by Board Deflection
100
C03E.pdf
Nov. 22,2019
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
6.0
1000 Cycles
Solder Crack
2000 Cycles
Compared with chips only,
this product is excellent
in solder cracking resistance.
Solder Crack
6
KCA Series
Test Condition: -55 to +125°C, 5min., (Liquid Phase)
Board Used: Glass Epoxy Board (FR-4)
2 chips can be stacked.
GCG Series
Realize large capacity by stacking 2 capacitors.
Specifications
Size
Rated Voltage
Capacitance
Main Applications
6.1×5.1mm
T
250Vac (r.m.s.)
100pF to 10000pF
Battery chargers, Inverter, DC-DC converters
KC3 Series
KCM Series
Metal Terminal Type
(5750 (in mm)/2220 (in inch) size)
e
L
!Caution
/Notice
Chip Only
(5750 (in mm)/2220 (in inch) size)
Chip Size
NMF Series
oSuppresses Solder Cracks Caused by Heat Stress
W
71
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
KCA Series Temperature Compensating Type
C03E.pdf
Nov. 22,2019
Part Number List
6.1×5.1mm
T
max.
Rated
TC
Voltage Code
3.0mm 250Vac(r.m.s.) U2J
Cap.
Tol.
Part Number
100pF
±10% KCA55L7UMF101KL01#
150pF
±10% KCA55L7UMF151KL01#
220pF
±10% KCA55L7UMF221KL01#
330pF
±10% KCA55L7UMF331KL01#
470pF
±10% KCA55L7UMF471KL01#
680pF
±10% KCA55L7UMF681KL01#
1000pF
±10% KCA55L7UMF102KL01#
1500pF
±10% KCA55L7UMF152KL01#
2200pF
±10% KCA55L7UMF222KL01#
3300pF
±10% KCA55L7UMF332KL01#
3.9mm 250Vac(r.m.s.) U2J 4700pF
±10% KCA55Q7UMF472KL01#
5.0mm 250Vac(r.m.s.) U2J 6800pF
±20% KCA55T7UMF682ML01#
6.7mm 250Vac(r.m.s.) U2J 10000pF ±20% KCA55W7UMF103ML01#
!Caution/
Notice
GCG Series
KCA Series
KC3 Series
KCM Series
NMF Series
GCE Series
GCD Series
GCQ Series
GCJ Series
GC3 Series
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
72
Part number # indicates the package specification code.
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
AgPd Termination Conductive Glue Mounting Chip Multilayer Ceramic Capacitors for Automotive
GCG Series
WEB
Features
1
Limited to Conductive Glue Mounting
This capacitor can be mounted with a conductive adhesive* in powertrains and safety devices of automotive.
Internal Electrodes
Ceramic Dielectric
External Electrodes
Cu+AgPd
GCJ Series
GC3 Series
Improved mechanical and thermal strength by adopting AgPd external electrodes,
which can be mounted with a conductive glue!
GRT Series
Nov. 22,2019
GCM Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Adopted AgPd, which is excellent in bonding strength with a conductive adhesive.
Compatible up to 150°C
This capacitor lineup with X8L and X8R characteristics can be used in high temperature environments, such as in
ABS and transmission control.
KCM Series
* This product is for use exclusively with conductive glue mounting. It cannot be used with any mounting methods other than conductive glue
mounting.
Using solder to mount the product can result in insufficient wetting, insufficient bonding strength, and/or leaching of the Ag/Pd External
Electrodes (terminations), which can cause quality problems such as the chip coming loose.
Specifications
Capacitance
Main Applications
e
g
e
6.3Vdc to 100Vdc
T
1.0pF to 47µF
For automotive, power trains, sensors
L
KC3 Series
Rated Voltage
1.0×0.5mm to 3.2×2.5mm
W
KCA Series
Size
GCG Series
3
GCE Series
Adopted AgPd external electrodes
!Caution
/Notice
2
NMF Series
Conductive Adhesive
GCD Series
GCQ Series
Foundation Electrode Layer
73
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GCG Series Temperature Compensating Type
T
max.
1.0×0.5mm
T
max.
Rated
TC
Voltage Code
0.55mm 50Vdc
X8G
0.9mm
T
max.
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
50Vdc
12pF
±5%
GCG1885G1H120JA01#
X8G
Cap.
Tol.
Part Number
15pF
±5%
GCG1885G1H150JA01#
120pF
±5%
GCG1555G1H121JA01#
18pF
±5%
GCG1885G1H180JA01#
150pF
±5%
GCG1555G1H151JA01#
22pF
±5%
GCG1885G1H220JA01#
180pF
±5%
GCG1555G1H181JA01#
27pF
±5%
GCG1885G1H270JA01#
220pF
±5%
GCG1555G1H221JA01#
33pF
±5%
GCG1885G1H330JA01#
270pF
±5%
GCG1555G1H271JA01#
39pF
±5%
GCG1885G1H390JA01#
330pF
±5%
GCG1555G1H331JA01#
47pF
±5%
GCG1885G1H470JA01#
390pF
±5%
GCG1555G1H391JA01#
56pF
±5%
GCG1885G1H560JA01#
470pF
±5%
GCG1555G1H471JA01#
68pF
±5%
GCG1885G1H680JA01#
82pF
±5%
GCG1885G1H820JA01#
100pF
±5%
GCG1885G1H101JA01#
120pF
±5%
GCG1885G1H121JA01#
150pF
±5%
GCG1885G1H151JA01#
180pF
±5%
GCG1885G1H181JA01#
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
0.9mm 100Vdc X8G
10pF
±5%
GCG1885G2A100JA01#
220pF
±5%
GCG1885G1H221JA01#
12pF
±5%
GCG1885G2A120JA01#
270pF
±5%
GCG1885G1H271JA01#
15pF
±5%
GCG1885G2A150JA01#
330pF
±5%
GCG1885G1H331JA01#
18pF
±5%
GCG1885G2A180JA01#
390pF
±5%
GCG1885G1H391JA01#
22pF
±5%
GCG1885G2A220JA01#
470pF
±5%
GCG1885G1H471JA01#
27pF
±5%
GCG1885G2A270JA01#
560pF
±5%
GCG1885G1H561JA01#
33pF
±5%
GCG1885G2A330JA01#
680pF
±5%
GCG1885G1H681JA01#
39pF
±5%
GCG1885G2A390JA01#
820pF
±5%
GCG1885G1H821JA01#
47pF
±5%
GCG1885G2A470JA01#
1000pF
±5%
GCG1885G1H102JA01#
56pF
±5%
GCG1885G2A560JA01#
1200pF
±5%
GCG1885G1H122JA01#
68pF
±5%
GCG1885G2A680JA01#
1500pF
±5%
GCG1885G1H152JA01#
82pF
±5%
GCG1885G2A820JA01#
1800pF
±5%
GCG1885G1H182JA01#
100pF
±5%
GCG1885G2A101JA01#
2200pF
±5%
GCG1885G1H222JA01#
120pF
±5%
GCG1885G2A121JA01#
150pF
±5%
GCG1885G2A151JA01#
180pF
±5%
GCG1885G2A181JA01#
220pF
±5%
GCG1885G2A221JA01#
270pF
±5%
GCG1885G2A271JA01#
T
max.
Cap.
Tol.
Part Number
330pF
±5%
GCG1885G2A331JA01#
0.7mm
X8G 1000pF
±5%
GCG2165G1H102JA01#
390pF
±5%
GCG1885G2A391JA01#
1200pF
±5%
GCG2165G1H122JA01#
470pF
±5%
GCG1885G2A471JA01#
1500pF
±5%
GCG2165G1H152JA01#
560pF
±5%
GCG1885G2A561JA01#
1800pF
±5%
GCG2165G1H182JA01#
680pF
±5%
GCG1885G2A681JA01#
2200pF
±5%
GCG2165G1H222JA01#
GCE Series
NMF Series
KCM Series
Rated
TC
Voltage Code
±5%
GCG1885G2A821JA01#
2700pF
±5%
GCG2165G1H272JA01#
±5%
GCG1885G2A102JA01#
3300pF
±5%
GCG2165G1H332JA01#
U2J 1000pF
±5%
GCG1887U2A102JA01#
3900pF
±5%
GCG2165G1H392JA01#
1200pF
±5%
GCG1887U2A122JA01#
4700pF
±5%
GCG2165G1H472JA01#
1500pF
±5%
GCG1887U2A152JA01#
X8G 5600pF
±5%
GCG2195G1H562JA01#
1800pF
±5%
GCG1887U2A182JA01#
6800pF
±5%
GCG2195G1H682JA01#
2200pF
±5%
GCG1887U2A222JA01#
8200pF
±5%
GCG2195G1H822JA01#
2700pF
±5%
GCG1887U2A272JA01#
10000pF
±5%
GCG2195G1H103JA01#
3300pF
±5%
GCG1887U2A332JA01#
3900pF
±5%
GCG1887U2A392JA01#
4700pF
±5%
GCG1887U2A472JA01#
5600pF
±5%
GCG1887U2A562JA01#
6800pF
±5%
GCG1887U2A682JA01#
8200pF
±5%
GCG1887U2A822JA01#
10000pF
±5%
GCG1887U2A103JA01#
10pF
±5%
GCG1885G1H100JA01#
KCA Series
820pF
GCG Series
50Vdc
!Caution/
Notice
KC3 Series
2.0×1.25mm
1000pF
50Vdc
74
X8G
C03E.pdf
Nov. 22,2019
Part Number List
1.6×0.8mm
GCD Series
GCQ Series
GCJ Series
GC3 Series
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
0.95mm 50Vdc
Part number # indicates the package specification code.
25Vdc
16Vdc
Tol.
Part Number
220pF
±10% GCG155L81H221KA02#
0.9mm 100Vdc X8R 1000pF
±10% GCG188R92A102KA01#
330pF
±10% GCG155L81H331KA02#
1200pF
±10% GCG188R92A122KA01#
470pF
±10% GCG155L81H471KA02#
1500pF
±10% GCG188R92A152KA01#
680pF
±10% GCG155L81H681KA02#
1800pF
±10% GCG188R92A182KA01#
1000pF
±10% GCG155L81H102KA02#
2200pF
±10% GCG188R92A222KA01#
1500pF
±10% GCG155L81H152KA02#
2700pF
±10% GCG188R92A272KA01#
2200pF
±10% GCG155L81H222KA02#
3300pF
±10% GCG188R92A332KA01#
3300pF
±10% GCG155L81H332KA02#
3900pF
±10% GCG188R92A392KA01#
4700pF
±10% GCG155L81H472KA02#
4700pF
±10% GCG188R92A472KA01#
220pF
±10% GCG155R71H221KA01#
5600pF
±10% GCG188R92A562KA01#
270pF
±10% GCG155R71H271KA01#
6800pF
±10% GCG188R92A682KA01#
330pF
±10% GCG155R71H331KA01#
8200pF
±10% GCG188R92A822KA01#
390pF
±10% GCG155R71H391KA01#
10000pF ±10% GCG188R92A103KA01#
470pF
±10% GCG155R71H471KA01#
12000pF ±10% GCG188R92A123KA01#
560pF
±10% GCG155R71H561KA01#
15000pF ±10% GCG188R92A153KA01#
680pF
±10% GCG155R71H681KA01#
18000pF ±10% GCG188R92A183KA01#
820pF
±10% GCG155R71H821KA01#
22000pF ±10% GCG188R92A223KA01#
1000pF
±10% GCG155R71H102KA01#
27000pF ±10% GCG188R92A273KA01#
1200pF
±10% GCG155R71H122KA01#
33000pF ±10% GCG188R92A333KA01#
1500pF
±10% GCG155R71H152KA01#
39000pF ±10% GCG188R92A393KA01#
1800pF
±10% GCG155R71H182KA01#
47000pF ±10% GCG188R92A473KA01#
2200pF
±10% GCG155R71H222KA01#
56000pF ±10% GCG188R92A563KA01#
2700pF
±10% GCG155R71H272KA01#
68000pF ±10% GCG188R92A683KA01#
3300pF
±10% GCG155R71H332KA01#
3900pF
±10% GCG155R71H392KA01#
50Vdc
X8L
0.10μF
±10% GCG188R92A104KA03#
0.15μF
±10% GCG188L8EH154KA07#
4700pF
±10% GCG155R71H472KA01#
0.22μF
±10% GCG188L8EH224KA07#
X8L 5600pF
±10% GCG155L81E562KA01#
X8R 1200pF
±10% GCG188R91H122KA03#
6800pF
±10% GCG155L81E682KA01#
1500pF
±10% GCG188R91H152KA03#
8200pF
±10% GCG155L81E822KA01#
2200pF
±10% GCG188R91H222KA03#
10000pF ±10% GCG155L81E103KA01#
2700pF
±10% GCG188R91H272KA03#
X7R 5600pF
±10% GCG155R71E562KA01#
3300pF
±10% GCG188R91H332KA03#
6800pF
±10% GCG155R71E682KA01#
3900pF
±10% GCG188R91H392KA03#
8200pF
±10% GCG155R71E822KA01#
4700pF
±10% GCG188R91H472KA03#
10000pF ±10% GCG155R71E103KA01#
5600pF
±10% GCG188R91H562KA03#
X8L 15000pF ±10% GCG155L81C153KA01#
6800pF
±10% GCG188R91H682KA03#
18000pF ±10% GCG155L81C183KA01#
8200pF
±10% GCG188R91H822KA03#
22000pF ±10% GCG155L81C223KA01#
10000pF ±10% GCG188R91H103KA03#
27000pF ±10% GCG155L81C273KA01#
15000pF ±10% GCG188R91H153KA03#
33000pF ±10% GCG155L81C333KA01#
22000pF ±10% GCG188R91H223KA03#
39000pF ±10% GCG155L81C393KA01#
33000pF ±10% GCG188R91H333KA03#
47000pF ±10% GCG155L81C473KA01#
47000pF ±10% GCG188R91H473KA03#
X7R 15000pF ±10% GCG155R71C153KA01#
0.10μF
±10% GCG188R91H104KA01#
18000pF ±10% GCG155R71C183KA01#
0.12μF
±10% GCG188R91H124KA01#
22000pF ±10% GCG155R71C223KA01#
0.15μF
±10% GCG188R91H154KA01#
27000pF ±10% GCG155R71C273KA01#
0.18μF
±10% GCG188R91H184KA01#
33000pF ±10% GCG155R71C333KA01#
0.22μF
±10% GCG188R91H224KA01#
0.15μF
±10% GCG188R71H154KA01#
0.22μF
±10% GCG188R71H224KA01#
0.33μF
±10% GCG188R91E334KA01#
68000pF ±10% GCG155R71C683KA01#
0.39μF
±10% GCG188R91E394KA01#
82000pF ±10% GCG155R71C823KA01#
0.47μF
±10% GCG188R91E474KA01#
0.12μF
±10% GCG188R71E124KA12#
39000pF ±10% GCG155R71C393KA01#
X7R
47000pF ±10% GCG155R71C473KA01#
56000pF ±10% GCG155R71C563KA01#
0.10μF
±10% GCG155R71C104KA01#
25Vdc
X8R
X7R
Part number # indicates the package specification code.
GRT Series
GCM Series
Cap.
GC3 Series
Rated
TC
Voltage Code
GCJ Series
T
max.
GCQ Series
X7R
Part Number
GCD Series
X8L
Tol.
GCE Series
0.55mm 50Vdc
Cap.
NMF Series
Rated
TC
Voltage Code
KCM Series
T
max.
1.6×0.8mm
KC3 Series
1.0×0.5mm
Part Number List
KCA Series
GCG Series High Dielectric Constant Type
C03E.pdf
Nov. 22,2019
GCG Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
/Notice
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
75
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GCG Series High Dielectric Constant Type
T
max.
0.9mm
Rated
TC
Voltage Code
25Vdc
GC3 Series
GCJ Series
X8L
Tol.
Part Number
0.15μF
±10% GCG188R71E154KA12#
0.18μF
±10% GCG188R71E184KA12#
0.22μF
±10% GCG188R71E224KA12#
0.15μF
±10% GCG188L81C154KA01#
0.22μF
±10% GCG188L81C224KA01#
1.0μF
±10% GCG188L8EE105KA07#
X7R
1.0μF
±10% GCG188R71C105KA01#
X7S
2.2μF
±10% GCG188C71A225KE01#
6.3Vdc
X7R
2.2μF
±10% GCG188R70J225KE01#
T
max.
Rated
TC
Voltage Code
1.35mm 25Vdc
X7R
16Vdc
X8L
1.9mm
25Vdc
16Vdc
X7R
X8L
2.0×1.25mm
T
max.
1.45mm 50Vdc
GCE Series
35Vdc
±10% GCG21BL8EH105KA07#
X7R
0.15μF
±10% GCG21BR71H154KA01#
0.18μF
±10% GCG21BR71H184KA01#
T
max.
0.22μF
±10% GCG21BR71H224KA01#
2.8mm
0.33μF
±10% GCG21BR71H334KA01#
0.47μF
±10% GCG21BR71H474KA01#
1.0μF
±10% GCG21BR71H105KA01#
2.2μF
±10% GCG31MR71E225KA12#
1.0μF
±10% GCG31ML81C105KA01#
1.5μF
±10% GCG31ML81C155KA01#
3.3μF
±10% GCG31CR71E335KA01#
3.9μF
±10% GCG31CR71E395KA01#
4.7μF
±10% GCG31CR71E475KA01#
3.3μF
±10% GCG31CL81C335KA01#
±10% GCG31CL81C475KA01#
±10% GCG31CR91C684KA01#
1.0μF
±10% GCG31CR91C105KA01#
X7R
22μF
±10% GCG31CR70J226KE01#
Rated
TC
Voltage Code
Cap.
X8L
0.68μF
±10% GCG21BL8EG684KA07#
1.0μF
X7R
0.68μF
1.0μF
±10% GCG21BR7YA105KA01#
50Vdc
Part Number
X8L
10μF
±10% GCG32EL8EH106KA07#
X7S
10μF
±10% GCG32EC71H106KA01#
±10% GCG32EL8EG106KA07#
10μF
10μF
±10% GCG32EC7YA106KA01#
X8L
22μF
±10% GCG32EL8EF226KE07#
±10% GCG21BL8EG105KA07#
X7R
10μF
±10% GCG32ER71E106KA12#
±10% GCG21BR7YA684KA01#
X7S
22μF
±10% GCG32EC71E226KE01#
16Vdc
X8R
6.8μF
±10% GCG32ER91C685KE01#
10μF
±10% GCG32ER91C106KE01#
6.3Vdc
X7R
47μF
±10% GCG32ER70J476KE01#
±10% GCG21BL81E334KA01#
0.68μF
±10% GCG21BR91E684KE01#
1.0μF
±10% GCG21BR91E105KE01#
X7R
0.27μF
±10% GCG21BR71E274KA01#
0.33μF
±10% GCG21BR71E334KA01#
0.39μF
±10% GCG21BR71E394KA01#
0.47μF
±10% GCG21BR71E474KA01#
0.56μF
±10% GCG21BR71E564KA01#
0.68μF
±10% GCG21BR71E684KA01#
0.82μF
±10% GCG21BR71E824KA01#
1.0μF
±10% GCG21BR71E105KA12#
0.33μF
±10% GCG21BL81C334KA01#
0.39μF
±10% GCG21BL81C394KA01#
0.47μF
±10% GCG21BL81C474KA01#
0.56μF
±10% GCG21BL81C564KA01#
0.68μF
±10% GCG21BL81C684KA01#
0.82μF
±10% GCG21BL81C824KA01#
X7R
4.7μF
±10% GCG21BR71C475KA12#
10Vdc
X7R
10μF
±10% GCG21BR71A106KE01#
6.3Vdc
X8L
10μF
±10% GCG21BL8EC106KE07#
X7R
10μF
±10% GCG21BR70J106KE01#
Rated
TC
Voltage Code
Cap.
35Vdc
Tol.
X8L
0.33μF
NMF Series
±10% GCG31MR71E155KA01#
X7S
X8L
KCA Series
1.5μF
3.2×2.5mm
1.0μF
X8L
Part Number
Part Number
X8L
KCM Series
KC3 Series
Tol.
X8R
16Vdc
GCG Series
Cap.
Tol.
0.68μF
6.3Vdc
Rated
TC
Voltage Code
Cap.
4.7μF
X8R
GCD Series
GCQ Series
X7R
Cap.
10Vdc
25Vdc
!Caution/
Notice
Part Number List
(→ 1.6×0.8mm)
16Vdc
25Vdc
3.2×1.6mm
T
max.
1.35mm 50Vdc
25Vdc
76
C03E.pdf
Nov. 22,2019
X8R
X7R
Tol.
Part Number
0.22μF
±10% GCG31MR91H224KA03#
0.33μF
±10% GCG31MR91H334KA03#
1.2μF
±10% GCG31MR71E125KA01#
Part number # indicates the package specification code.
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1. Temperature Dependent Characteristics ............... 78
2. Measurement of Capacitance ...................................... 78
3. Applied Voltage and Applied Current ....................... 79
4. Type of Applied Voltage and
Self-heating Temperature ............................................. 79
2. Atmosphere Surroundings
(gaseous and liquid) ........................................................ 92
3. Piezo-electric Phenomenon .......................................... 92
Soldering and Mounting ........................................................... 92
1. PCB Design .......................................................................... 92
5. DC Voltage and AC Voltage Characteristics .......... 81
1. Notice for Pattern Forms .......................................... 92
6. Capacitance Aging ............................................................ 81
2. Land Dimensions .......................................................... 93
7. Vibration and Shock ......................................................... 82
3. Board Design .................................................................. 95
2. Item to be confirmed for Flow soldering .................. 95
Soldering and Mounting ........................................................... 82
3. Reflow Soldering................................................................ 96
1. Mounting Position ............................................................. 82
4. Washing ................................................................................ 97
2. Information before Mounting ....................................... 83
5. Coating .................................................................................. 97
3. Maintenance of the Mounting
(pick and place) Machine ............................................... 83
4-1. Reflow Soldering ........................................................... 84
4-2. Flow Soldering ............................................................... 85
4-3. Correction of Soldered Portion ............................... 86
5. Washing ................................................................................ 87
6. Electrical Test on Printed Circuit Board ................... 87
7. Printed Circuit Board Cropping .................................... 87
8. Assembly .............................................................................. 90
9. Selection of Conductive Adhesive,
Mounting Process, and Bonding Strength ............... 91
Other ................................................................................................ 97
1. Transportation.................................................................... 97
2. Characteristics Evaluation
in the Actual System ....................................................... 97
GRT Series
GCM Series
GC3 Series
Rating .............................................................................................. 78
GCJ Series
1. Operating Temperature .................................................. 92
GCQ Series
Rating .............................................................................................. 92
GCD Series
Storage and Operation Conditions ...................................... 78
Notice
GCE Series
!Caution
NMF Series
Target series: GRT, GCM, GC3, GCJ, GCQ, GCD, GCE, NFM, KCM, KC3, KCA, GCG
KCM Series
WEB
KC3 Series
!Caution/Notice
Nov. 22,2019
1. Under Operation of Equipment ................................... 91
2. Other ...................................................................................... 91
GCG Series
Other ................................................................................................ 91
!Caution
/Notice
11. Application ........................................................................ 91
KCA Series
10. Moisture Proof Process ................................................ 91
77
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Caution
GCG Series
Nov. 22,2019
!Caution
Storage and Operation Conditions
1. The performance of chip multilayer ceramic capacitors
(henceforth just "capacitors") may be affected by the
storage conditions.
Please use them promptly after delivery.
1-1. Maintain appropriate storage for the capacitors using
the following conditions:
Room Temperature of +5°C to +40°C and a Relative
Humidity of 20% to 70%.
High temperature and humidity conditions and/or
prolonged storage may cause deterioration of the
packaging materials. If more than six months have
elapsed since delivery, check packaging, mounting, etc.
before use.
In addition, this may cause oxidation of the electrodes.
If more than one year has elapsed since delivery, also
check the solderability before use.
1-2. Corrosive gas can react with the termination
(external) electrodes or lead wires of capacitors, and
result in poor solderability. Do not store the
capacitors in an atmosphere consisting of corrosive
gas (e.g.,hydrogen sulfide, sulfur dioxide, chlorine,
ammonia gas etc.).
1-3. Due to moisture condensation caused by rapid
humidity changes, or the photochemical change
caused by direct sunlight on the terminal electrodes
and/or the resin/epoxy coatings, the solderability
and electrical performance may deteriorate. Do not
store capacitors under direct sunlight or in high
huimidity conditions
1-4. After unpacking, immediately reseal, or store in a
desiccator containing a desiccant.
Rating
1. Temperature Dependent Characteristics
1. The electrical characteristics of a capacitor can change
with temperature.
1-1. For capacitors having larger temperature
dependency, the capacitance may change with
temperature changes.
The following actions are recommended in order to
ensure suitable capacitance values.
(1) Select a suitable capacitance for the operating
temperature range.
[Example of Temperature Characteristics X7R(R7)]
(2) The capacitance may change within the rated
temperature.
When you use a high dielectric constant type
capacitor in a circuit that needs a tight (narrow)
capacitance tolerance (e.g., a time-constant
circuit), please carefully consider the temperature
characteristics, and carefully confirm the various
characteristics in actual use conditions and the
actual system.
[Example of Temperature Characteristics X5R (R6)]
Sample: 0.1μF, Rated Voltage 50VDC
Sample: 22μF, Rated Voltage 4VDC
20
20
10
15
Capacitance Change (%)
Capacitance Change (%)
KCA Series
KC3 Series
KCM Series
NMF Series
GCE Series
GCD Series
GCQ Series
GCJ Series
GC3 Series
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
0
-10
-20
-30
-40
-50
-75
10
5
0
-5
-10
-15
-50
-25
0
25
50
Temperature (°C)
75
100
125
-20
-75
-50
-25
0
25
Temperature (°C)
50
75
100
2. Measurement of Capacitance
1. Measure capacitance with the voltage and frequency
specified in the product specifications.
1-1. The output voltage of the measuring equipment may
decrease occasionally when capacitance is high.
Please confirm whether a prescribed measured
voltage is impressed to the capacitor.
1-2. The capacitance values of high dielectric constant
type capacitors change depending on the AC voltage
applied. Please consider the AC voltage
characteristics when selecting a capacitor to be used
in an AC circuit.
Continued on the following page.
78
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
Continued from the preceding page.
GRT Series
!Caution
Nov. 22,2019
3. Applied Voltage and Applied Current
GCQ Series
GCJ Series
GC3 Series
GCM Series
1. Do not apply a voltage to the capacitor that exceeds the
rated voltage as called out in the specifications.
1-1. Applied voltage between the terminals of a capacitor
shall be less than or equal to the rated voltage.
(1) When AC voltage is superimposed on DC voltage,
the zero-to-peak voltage shall not exceed the
rated DC voltage.
When AC voltage or pulse voltage is applied, the
peak-to-peak voltage shall not exceed the rated
DC voltage.
(2) Abnormal voltages (surge voltage, static
electricity, pulse voltage, etc.) shall not exceed
the rated DC voltage.
Typical Voltage Applied to the DC Capacitor
E
Pulse Voltage
0
E
GCD Series
E
AC Voltage
E
0
0
0
(E: Maximum possible applied voltage.)
3. The capacitors also have rated currents.
The current flowing between the terminals of a capacitor
shall be less than or equal to the rated current. Using the
capacitor beyond this range could lead to excessive heat.
KCM Series
1-2. Influence of over voltage
Over voltage that is applied to the capacitor may
result in an electrical short circuit caused by the
breakdown of the internal dielectric layers.
The time duration until breakdown depends on the
applied voltage and the ambient temperature.
2. Use a safety standard certified capacitor in a power
supply input circuit (AC filter), as it is also necessary to
consider the withstand voltage and impulse withstand
voltage defined for each device.
GCE Series
DC Voltage+AC
NMF Series
DC Voltage
KCA Series
[Example of Temperature Rise (Heat Generation)
in Chip Multilayer Ceramic Capacitors in Contrast
to Ripple Current]
Sample: R(R1) characteristics 10μF,
Rated voltage: DC10V
Ripple Current
GCG Series
100
10
100kHz
500kHz
1MHz
1
0
1
2
3
4
5
6
Current (Ar.m.s.)
!Caution
Temperature Rise (°C)
1. Confirm the operating conditions to make sure that no large
current is flowing into the capacitor due to the continuous
application of an AC voltage or pulse voltage.
When a DC rated voltage product is used in an AC voltage
circuit or a pulse voltage circuit, the AC current or pulse
current will flow into the capacitor; therefore check the
self-heating condition.
Please confirm the surface temperature of the capacitor so
that the temperature remains within the upper limits of the
operating temperature, including the rise in temperature due
to self-heating. When the capacitor is used with a
high-frequency voltage or pulse voltage, heat may be
generated by dielectric loss.
1-1. The load should be contained so that the self-heating of
the capacitor body remains below 20°C, when measuring
at an ambient temperature of 25°C.
KC3 Series
4. Type of Applied Voltage and Self-heating Temperature
Continued on the following page.
79
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Continued from the preceding page.
1-2. The load should be contained so that the self-heating
of the capacitor body remains below 20°C, when
measuring at an ambient temperature of 25°C. In
addition, use a K thermocouple of ø0.1mm with less
heat capacity when measuring, and measure in a
condition where there is no effect from the radiant
heat of other components or air flow caused by
convection. Excessive generation of heat may cause
deterioration of the characteristics and reliability of the
capacitor. (Absolutely do not perform measurements
while the cooling fan is operating, as an accurate
measurement may not be performed.)
GCD Series
GCE Series
The surface temperature of the capacitor: 125°C or less
(including self-heating)
C0G char., Rated Voltage: DC630V
Chip (L×W): 3.2×1.6mm
1000
6,800pF
10,000pF
100
15,000pF
10
10
680pF
820pF
1,000pF
1,500pF
2,200pF
3,300pF
100
10
1000
100
Frequency [kHz]
U2J(7U) char., Rated Voltage: DC630V
Chip (L×W): 3.2×1.6mm,3.2×2.5mm
1000
1000
to 2,200pF
4,700pF
(250)
10,000pF
100
10
1
10
100
Frequency [kHz]
1000
2,200pF
4,700pF
10,000pF
100
22,000pF
47,000pF
10
1
10
100
Frequency [kHz]
1000
to 100pF
220pF
1,000pF
100
Frequency [kHz]
1000
U2J(7U) char., Rated Voltage: DC1kV
Chip (L×W): 3.2×1.6mm,3.2×2.5mm
10000
to 680pF
1,000pF
1000
100
10
1000
U2J(7U) char., Rated Voltage: DC250V
Chip (L×W): 2.0×1.25mm, 3.2×1.6mm
Allowable voltage [Vp-p]
Allowable voltage [Vp-p]
100
Frequency [kHz]
560pF
(630V)
Allowable voltage [Vp-p]
to 3,900pF
4,700pF
10000
to 470pF
Allowable voltage [Vp-p]
1000
C0G char., Rated Voltage: DC1kV
Chip (L×W): 3.2×1.6mm
Allowable voltage [Vp-p]
C0G (5C) char., Rated Voltage: DC250V
Chip (L×W): 3.2×1.6mm
Allowable voltage [Vp-p]
NMF Series
KCM Series
1-3. Since the self-heating is low in the low loss series, the
allowable power becomes extremely high compared to
the common X7R(R7) characteristics.
However, when a load with self-heating of 20°C is
applied at the rated voltage, the allowable power may
be exceeded. When the capacitor is used in a
high-frequency voltage circuit of 1kHz or more, the
frequency of the applied voltage should be less than
500kHz sine wave (less than 100kHz for a product
with rated voltage of DC3.15kV), to limit the voltage
load so that the load remains within the derating
shown in the following figure. In the case of non-sine
wave, high-frequency components exceeding the
fundamental frequency may be included. In such a case,
please contact Murata. The excessive generation of
heat may cause deterioration of the characteristics
and reliability of the capacitor.
(Absolutely do not perform measurements while the
cooling fan is operating, as an accurate measurement
may not be performed.)
[Sine-wave frequency VS allowable voltage]
KC3 Series
KCA Series
GCG Series
!Caution
80
Nov. 22,2019
!Caution
GCQ Series
GCJ Series
GC3 Series
GCM Series
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
to 470pF
1000
1,000pF
2,200pF
4,700pF
100
10
10,000pF
1
10
100
Frequency [kHz]
1000
Continued on the following page.
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
Continued from the preceding page.
GRT Series
!Caution
Nov. 22,2019
GC3 Series
20
0
-20
GCJ Series
-40
-60
-80
-100
0
10
20
30
40
50
GCD Series
GCQ Series
DC Voltage (V)
GCE Series
2. The capacitance values of high dielectric constant type
capacitors changes depending on the AC voltage applied.
Please consider the AC voltage characteristics when
selecting a capacitor to be used in an AC circuit.
[Example of DC Voltage Characteristics]
Sample: R(R1) Characteristics 0.1μF,
Rated Voltage 50VDC
Capacitance Change (%)
1. The capacitance value of a high dielectric constant type
capacitor changes depending on the DC voltage applied.
Please consider the DC voltage characteristics when a
capacitor is selected for use in a DC circuit.
1-1. The capacitance of ceramic capacitors may change
sharply depending on the applied voltage (see figure).
Please confirm the following in order to secure the
capacitance.
(1) Determine whether the capacitance change
caused by the applied voltage is within the
allowed range.
(2) In the DC voltage characteristics, the rate of
capacitance change becomes larger as voltage
increases, even if the applied voltage is below the
rated voltage. When a high dielectric constant
type capacitor is used in a circuit that requires a
tight (narrow) capacitance tolerance (e.g., a time
constant circuit), please carefully consider the
voltage characteristics, and confirm the various
characteristics in the actual operating conditions
of the system.
GCM Series
5. DC Voltage and AC Voltage Characteristics
[Example of AC Voltage Characteristics]
Sample: X7R(R7) Characteristics 10μF,
Rated Voltage 6.3VDC
NMF Series
20
10
0
-10
-20
-30
-40
-50
-60
0
0.5
1
1.5
2
KCM Series
Capacitance Change (%)
30
KC3 Series
AC Voltage (Vr.m.s.)
[Example of Change Over Time (Aging Characteristics)]
20
GCG Series
10
0
-10
-20
C0G(5C)
X7R(R7)
-30
-40
10
100
1000
10000
Time (h)
!Caution
Capacitance Change (%)
1. The high dielectric constant type capacitors have the
Characteristics in which the capacitance value decreases
with the passage of time.
When you use high dielectric constant type capacitors in
a circuit that needs a tight (narrow) capacitance
tolerance (e.g., a time-constant circuit), please carefully
consider the characteristics of these capacitors, such as
their aging, voltage, and temperature characteristics. In
addition, check capacitors using your actual appliances at
the intended environment and operating conditions.
KCA Series
6. Capacitance Aging
Continued on the following page.
81
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov. 22,2019
!Caution
Continued from the preceding page.
1. Please confirm the kind of vibration and/or shock, its
condition, and any generation of resonance.
Please mount the capacitor so as not to generate
resonance, and do not allow any impact on the terminals.
2. Mechanical shock due to being dropped may cause
damage or a crack in the dielectric material of the
capacitor.
Do not use a dropped capacitor because the quality and
reliability may be deteriorated.
Crack
GCD Series
GCQ Series
GCJ Series
GC3 Series
GCM Series
7. Vibration and Shock
Floor
3. When printed circuit boards are piled up or handled, the
corner of another printed circuit board should not be
allowed to hit the capacitor, in order to avoid a crack or
other damage to the capacitor.
Mounting printed circuit board
Crack
Soldering and Mounting
!Caution
GCG Series
KCA Series
KC3 Series
KCM Series
NMF Series
GCE Series
1. Mounting Position
1. Confirm the best mounting position and direction that
minimizes the stress imposed on the capacitor during
flexing or bending the printed circuit board.
1-1. Choose a mounting position that minimizes the
stress imposed on the chip during flexing or bending
of the board.
2. If you mount the capacitor near components that
generate heat, take note of the heat from the other
components and carefully check the self-heating of the
capacitor before using.
If there is significant heat radiation from other
components, it could lower the insulation resistance of
the capacitor or produce excessive heat.
[Component Direction]
Locate chip
horizontal to
the direction in
which stress
acts.
(Bad Example)
[Chip Mounting Close to Board Separation Point]
It is effective to implement the following measures, to reduce
stress in separating the board.
It is best to implement all of the following three measures; however,
implement as many measures as possible to reduce stress.
Contents of Measures
Stress Level
(1) Turn the mounting direction of the component
parallel to the board separation surface.
A > D *1
(2) Add slits in the board separation part.
A>B
(3) Keep the mounting position of the component
away from the board separation surface.
A>C
Perforation
A
C
B
D
Slit
*1 A > D is valid when stress is added vertically to the perforation as with
Hand Separation.
If a Cutting Disc is used, stress will be diagonal to the PCB, therefore
A > D is invalid.
[Mounting Capacitors Near Screw Holes]
When a capacitor is mounted near a screw hole, it may be affected
by the board deflection that occurs during the tightening of the
screw. Mount the capacitor in a position as far away from the
screw holes as possible.
Screw Hole
82
(Good Example)
Recommended
Continued on the following page.
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
Continued from the preceding page.
GRT Series
!Caution
Nov. 22,2019
2. Information before Mounting
GCD Series
GCQ Series
GCJ Series
GC3 Series
GCM Series
1. Do not re-use capacitors that were removed from the
equipment.
2. Confirm capacitance characteristics under actual applied
voltage.
3. Confirm the mechanical stress under actual process and
equipment use.
4. Confirm the rated capacitance, rated voltage and other
electrical characteristics before assembly.
5. Prior to use, confirm the solderability of capacitors that
were in long-term storage.
6. Prior to measuring capacitance, carry out a heat
treatment for capacitors that were in long-term storage.
7. The use of Sn-Zn based solder will deteriorate the
reliability of the MLCC.
Please contact our sales representative or product
engineers on the use of Sn-Zn based solder in advance.
8. We have also produced a DVD which shows a summary of
our recommendations, regarding the precautions for
mounting. Please contact our sales representative to
request the DVD.
Deflection
Board
Board Guide
[Correct]
KC3 Series
Support Pin
NMF Series
Suction Nozzle
KCM Series
[Incorrect]
Continued on the following page.
GCG Series
KCA Series
2. Dirt particles and dust accumulated in the suction nozzle
and suction mechanism prevent the nozzle from moving
smoothly. This creates excessive force on the capacitor
during mounting, causing cracked chips. Also, the locating
claw, when worn out, imposes uneven forces on the chip
when positioning, causing cracked chips. The suction
nozzle and the locating claw must be maintained,
checked, and replaced periodically.
!Caution
1. Make sure that the following excessive forces are not
applied to the capacitors. Check the mounting in the
actual device under actual use conditions ahead of time.
1-1. In mounting the capacitors on the printed circuit
board, any bending force against them shall be kept
to a minimum to prevent them from any damage or
cracking. Please take into account the following
precautions and recommendations for use in your
process.
(1) Adjust the lowest position of the pickup nozzle so
as not to bend the printed circuit board.
GCE Series
3. Maintenance of the Mounting (pick and place) Machine
83
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov. 22,2019
!Caution
Continued from the preceding page.
[Example of Temperature Conditions for Reflow Soldering]
Temperature (°C)
ΔT
190°C (170°C)
170°C (150°C)
150°C (130°C)
Preheating
Time
60-120 seconds 30-60 seconds
Temperature
Incase of Lead Free Solder
( ): In case of Pb-Sn Solder
[Allowable Reflow Soldering Temperature and Time]
!Caution
Recommended Conditions
Pb-Sn Solder
Lead Free Solder
Peak Temperature
230 to 250°C
240 to 260°C
Atmosphere
Air
Air or N2
250
240
230
220
0
30
60
90
120
Soldering Time (s)
In the case of repeated soldering, the accumulated
soldering time must be within the range shown above.
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
4-2. Too little solder paste results in a lack of adhesive
strength on the termination, which may result in
chips breaking loose from the PCB.
4-3. Please confirm that solder has been applied
smoothly to the termination.
[Guideline of solder paste thickness]
{zzQ{z£+B
|{G}{
}{
NFM21HC
NFM18HC
1.2
3. When a capacitor is mounted at a temperature lower
than the peak reflow temperature recommended by the
solder manufacturer, the following quality problems can
occur. Consider factors such as the placement of
peripheral components and the reflow temperature
setting to prevent the capacitor’s reflow temperature
from dropping below the peak temperature specified. Be
sure to evaluate the mounting situation beforehand and
verify that none of the following problems occur.
F0-.',1-*"#05#22 '*'27
F-*"#04-'"1
F-11' *#-!!300#,!#-$5&'1)#0',%
F0-.', -,"',%120#,%2&
F0-.',1#*$Q*'%,+#,2.0-.#02'#1
F-11' *#-!!300#,!#-$2-+ 12-,#1,"G-01&'x',%-,
the land patterns of the circuit board
4. Optimum Solder Amount for Reflow Soldering
4-1. Overly thick application of solder paste results in a
excessive solder fillet height.
This makes the chip more susceptible to mechanical
and thermal stress on the board and may cause the
chips to crack.
260
0.4
1.0
2.2
0.6
1.4
2.6
2.6
55
270
1.2
KCM/KC3/KCA
ΔT<
=130°C
0.6
32/43/55
Soldering Temperature (°C)
GRT/GCM/GCJ
280
0.4
GCG Series
KCA Series
KC3 Series
KCM Series
NMF Series
GCE Series
GCD Series
GRT/GCM/GC3/GCD/GCE/GCJ/NFM 03/15/18/21/31 ΔT<
=190°C
0.8
1.9
Chip Dimension Code Temperature
(L/W)
Differential
Gradual
Cooling
220°C (200°C)
Table 1
Series
Soldering
Peak Temperature
0.6
1. When sudden heat is applied to the components, the
mechanical strength of the components will decrease
because a sudden temperature change causes
deformation inside the components. In order to prevent
mechanical damage to the components, preheating is
required for both the components and the PCB.
Preheating conditions are shown in table 1. It is required to
keep the temperature differential between the solder and
the components surface (ΔT) as small as possible.
2. When components are immersed in solvent after mounting,
be sure to maintain the temperature difference (ΔT)
between the component and the solvent within the range
shown in table 1.
0.6-0.8
GCQ Series
GCJ Series
GC3 Series
GCM Series
4-1. Reflow Soldering
1.0
2.5
4.4
Inverting the PCB
Make sure not to impose any abnormal mechanical shocks to
the PCB.
84
Continued on the following page.
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
Continued from the preceding page.
GRT Series
!Caution
Nov. 22,2019
1. Do not apply flow soldering to chips not listed in table 2.
[Example of Temperature Conditions for Flow Soldering]
Temperature (°C)
Chip Dimension Temperature
Code (L/W)
Differential
GRT/GCM/GC3/GCD (Except for
characteristics of X8L(L8), X8G(5G),
CHA(0C), X8R(R9))
Preheating
Peak
Temperature
18/21/31
ΔT<
=150°C
Time
5 seconds max.
280
270
260
250
240
230
220
0
10
20
30
40
Soldering Time (s)
NMF Series
In the case of repeated soldering, the accumulated
soldering time must be within the range shown above.
Preheating Peak Temperature
90 to 110°C
100 to 120°C
140 to 160°C (NFM)
Soldering Peak Temperature
240 to 250°C
250 to 260°C
Atmosphere
Air
Air or N2
KC3 Series
Lead Free Solder
KCM Series
Recommended Conditions
Pb-Sn Solder
GCD Series
GCQ Series
[Allowable Flow Soldering Temperature and Time]
Soldering Temperature (°C)
2. When sudden heat is applied to the components, the
mechanical strength of the components will decrease
because a sudden temperature change causes
deformation inside the components. In order to prevent
mechanical damage to the components, preheating is
required for both of the components and the PCB.
Preheating conditions are shown in table 2. It is required
to keep the temperature differential between the solder
and the components surface (ΔT) as low as possible.
3. Excessively long soldering time or high soldering
temperature can result in leaching of the terminations,
causing poor adhesion or a reduction in capacitance value
due to loss of contact between the inner electrodes and
terminations.
4. When components are immersed in solvent after
mounting, be sure to maintain the temperature
differential (ΔT) between the component and solvent
within the range shown in the table 2.
30-90 seconds
GCJ Series
Preheating
NFM
GCE Series
GCJ
(Rated Voltage 250VDC or more)
Gradual
Cooling
ΔT
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
GCG Series
KCA Series
5. Optimum Solder Amount for Flow Soldering
5-1. The top of the solder fillet should be lower than the
thickness of the components. If the solder amount is
excessive, the risk of cracking is higher during board
bending or any other stressful condition.
Up to Chip Thickness
Adhesive
in section
Continued on the following page.
!Caution
Series
Soldering
Soldering
Peak
Temperature
GC3 Series
Table 2
GCM Series
4-2. Flow Soldering
85
C03E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GRT Series
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov. 22,2019
!Caution
Continued from the preceding page.
GCJ Series
GC3 Series
GCM Series
4-3. Correction of Soldered Portion
When sudden heat is applied to the capacitor, distortion caused
by the large temperature difference occurs internally, and can be
the cause of cracks. Capacitors also tend to be affected by
mechanical and thermal stress depending on the board preheating
temperature or the soldering fillet shape, and can be the cause
of cracks. Please refer to "1. PCB Design" or "3. Optimum solder
amount" for the solder amount and the fillet shapes.
1. Correction with a Soldering Iron
1-1. In order to reduce damage to the capacitor, be sure to
preheat the capacitor and the mounting board. Preheat
to the temperature range shown in Table 3. A hot plate,
hot air type preheater, etc. can be used for preheating.
1-2. After soldering, do not allow the component/PCB to cool
down rapidly.
1-3. Perform the corrections with a soldering iron as quickly
as possible. If the soldering iron is applied too long, there
is a possibility of causing solder leaching on the terminal
electrodes, which will cause deterioration of the adhesive
strength and other problems.
Series
Chip Dimension Code
(L/W)
Temperature of
Soldering Iron Tip
Preheating
Temperature
Temperature
Differential (ΔT)
GCG Series
!Caution
Atmosphere
GRT/GCM/GC3/GCD/GCE/GCJ
03/15/18/21/31
350°C max.
150°C min.
32/43/55
280°C max.
150°C min.
ΔT<
=190°C