C02E.pdf
Mar.13,2020
Chip Multilayer Ceramic Capacitors
for General
2020
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
Contents
p89
p29
p91
p29
p94
p29
p97
p30
p101
p31
p103
p31
p105
p32
p107
p32
p109
p32
p112
p32
p116
p34
p119
p34
p122
p125
p151
p152
p35
Please check the MURATA website (https://www.murata.com/)
if you cannot find a part number in this catalog.
EU RoHS Compliant
• All the products in this catalog comply with EU RoHS.
• EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment."
• For more details, please refer to our web page, "Murata's Approach for EU RoHS" (https://www.murata.com/eneu/support/compliance/rohs).
Qualified Standards
• The products listed here have been produced by ISO 9001 certified factory.
• Fukui Murata Mfg. Co., Ltd.
• Izumo Murata Mfg. Co., Ltd.
• Murata Electronics Singapore (Pte.) Ltd.
• Wuxi Murata Electronics Co., Ltd.
• PHILIPPINE MANUFACTURING CO. OF MURATA, INC.
GRJ
GR4
p28
GJM
p81
GQM
p27
GA2
p66
GA3
GB
p26
GA3
GD
p63
GA3
GF
p25
LLL
p61
LLA
p25
LLM
p59
LLR
p11
NFM
p37
KRM
Cap. Table
KR3
Chip Multilayer Ceramic Capacitors for General Purpose
GRM Series
High Effective Capacitance & High Ripple Current Chip Multilayer Ceramic Capacitors
for General Purpose GR3 Series
Soft Termination Chip Multilayer Ceramic Capacitors for General Purpose
GRJ Series
Chip Multilayer Ceramic Capacitors for Information Devices Only
GR4 Series
High Q Chip Multilayer Ceramic Capacitors for General Purpose
GJM Series
High Q and High Power Chip Multilayer Ceramic Capacitors for General Purpose
GQM Series
Based on the Electrical Appliance and Material Safety Law of Japan Chip Multilayer
Ceramic Capacitors for General Purpose GA2 Series
Safety Standard Certified Chip Multilayer Ceramic Capacitors for General Purpose /
IEC60384-14 Class X2 GA3 Series Type GB
Safety Standard Certified Chip Multilayer Ceramic Capacitors for General Purpose /
Acquired Certifications of UL60950-1 GA3 Series Type GD
Safety Standard Certified Chip Multilayer Ceramic Capacitors for General Purpose /
Acquired Certifications of IEC60384-14 Class X1/Y2 and UL60950-1 GA3 Series Type GF
LW Reversed Low ESL Chip Multilayer Ceramic Capacitors for General Purpose
LLL Series
8 Terminals Low ESL Chip Multilayer Ceramic Capacitors for General Purpose
LLA Series
10 Terminals Low ESL Chip Multilayer Ceramic Capacitors for General Purpose
LLM Series
LW Reversed Controlled ESR Low ESL Chip Multilayer Ceramic Capacitors for
General Purpose LLR Series
3 Terminals Low ESL Chip Multilayer Ceramic Capacitors for General Purpose
NFM Series
Metal Terminal Type Multilayer Ceramic Capacitors for General Purpose
KRM Series
High Effective Capacitance & High Allowable Ripple Current Metal Terminal Type
Multilayer Ceramic Capacitors for General Purpose KR3 Series
Wire Bonding Mount Multilayer Microchip Capacitors for General Purpose
GMA Series
Wire Bonding/AuSn Soldering Mount Chip Multilayer Ceramic Capacitors for
General Purpose GMD Series
!Caution/Notice/Soldering and Mounting
Introduction of Website SimSurfing
Product Information
p6
p10
GMA
Part Numbering
Capacitance Table
GMD
p3
p4
p5
!Caution
/Notice
Explanation of Symbols in This Catalog
Selection Guide
Catalog information
GR3
Product specifications are as of January 2020.
2
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Explanation of Symbols in This Catalog
Links are provided to the latest information from the PDF version of the catalog, which is available on the web.
Infotainment for Automotive
The product for entertainment equipment like car navigations, car
audios, and body control equipment like wipers, power windows.
Powertrain/Safety for Automotive
Product used for applications (running, turning, stopping and safety
devices) which particularly concern human life, such as in devices for
automobiles.
Medical-grade products for Implanted Medical Devices
These products are intended for use in implanted medical devices
such as cardiac pacemakers, cochlear implants, insulin pumps and
gastric electrostimulators.
They are suitable for use in non-critical circuits. *1
*1 Non-critical circuits
This term refers to circuits in implanted medical devices that are
not directly linked to life support, i.e. circuits that will not directly
endanger the life of the patient should the functionality of the
device be reduced or halted by failure of the circuit.
AEC-Q200 compliant product
Safety Standard Certified Product
Products that acquired safety standard certification IEC60384-14
and products based on the Electrical Appliance and Material Safety
Law of Japan.
Based on the Electrical Appliance and Material Safety Law of Japan
Products that are based on the electrical appliance and material
safety law of Japan.
Low dissipation for high frequency
By devising ceramic materials and electrode materials, low
dissipation is achieved in frequency bands of VHF, UHF and
microwave or beyond.
Low inductance
This capacitor is designed so that the parasitic inductance
component (ESL) that the capacitor has on the high frequency side
becomes lower.
Derating 1
Murata's General MLCC products are desighed for use in devices with
a typical lifetime around 10 years.
Murata's general MLCC products are desighed so that the useful
lifetime can be extended longer than 10 years under the following
conditions:
"80% of the rated voltage or less, Maximum operating temperature
-20 degree C or less"
Extended useful lifetime, under specific operating conditions, can be
estimated from the chart.
• The useful lifetime is the time when cumulative fallure rate becomes 1%.
• Please note that the useful lifetime data is for reference only and not
guaranteed.
at rated voltage x 80%
100
10
0.1
40
No DC bias characteristics
Polymer capacitor is no capacitance change with DC bias due to
aluminum oxidized film for dielectric.
Low-inductance product suitable for noise suppression.
This product has extremely low ESL and is suitable for suppression
of noise, including high frequencies.
This product can also be used as a low-ESL, high-performance
bypass capacitor.
60
70
80
90
100
110
120 130
Derating 2
When the product temperature exceeds 105°C, please use this
product within the voltage and temperature derated conditions in the
figure below.
700
Rated Voltage 630V
600
500
(450V)
Rated Voltage 450V
400
(350V)
300
200
100
0
0
25
50
75
100
125
150
Product Temperature (°C)
Derating 3
Please apply the derating curve according to the operating
temperature.
Please refer to detailed specifications sheet for details.
Derating 4
When the product temperature exceeds 125°C, please use this
product within the voltage and temperature derated conditions in the
figure below.
Operating Voltage/Rated Voltage (%)
Product suitable for acoustic noise reduction and low distortion
This product suppresses acoustic noise, which occurs when a
ceramic capacitor is used, by devising the materials and
configuration.
50
Operating Temperature of MLCC (°C)
Product resistant to deflection cracking
This capacitor is designed to prevent failures as much as possible by
short mode caused by cracking when there is board deflection.
Product with solder cracking suppression
“This capacitor is configured with metal terminals and leads
connected to the chip. The metal terminals and leads relieve the
stress from expansion and contraction of the solder, to suppress
solder cracking.”
85°C Type
105°C Type
125°C Type
1
Operating Voltage/Rated Voltage (%)
For applications that do not require the particular reliability such as
the general equipment
Life Time (Year)
WEB
120
100
80
60
(50)
40
20
0
-75 -50 -25
0
25
50
75
100 125 150 175
Product Temperature (°C)
Product for bonding
Since gold is used for the external electrodes, the capacitor can be
mounted by die bonding/wire bonding.
Derating 5
Please apply the rated voltage derating over 150 °C.
Please refer to detailed specifications sheet for details.
3
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Selection Guide for Ceramic Capacitors
For general
Infotainment for automotive
SMD
SMD
Solder mounting
Solder mounting
Chip type
Chip type
p37
GRM
GR3
High effective capacitance &
high ripple current
p59
GRJ
Soft termination
p61
GR4
For information devices only
p63
p66
GJM
GRT
WEB
Powertrain/Safety for automotive
SMD
Solder mounting
GQM
High power
p81
GA2
Based on the Electrical Appliance
and Material Safety Law of Japan
p89
GCM
p91
GC3
High effective capacitance &
high ripple current
WEB
Soft termination
WEB
GA3
Chip type
WEB
LLL
LW reversed
p101
GCJ
LLA
8 terminals
p103
GCQ
LLM
10 terminals
p105
GCD
MLSC design
WEB
LLR
LW reversed controlled ESR
p107
GCE
Soft termination MLSC design
WEB
NFM
3 terminals
p109
NFM
3 terminals
WEB
GJ4
Low distortion
WEB
Metal terminal type
KCM
On interposer board
ZRA
WEB
KC3
ZRB
WEB
KCA
Metal terminal type
WEB
High effective capacitance &
high ripple current
p112
High effective capacitance &
high ripple current
WEB
Chip type
p116
Resin molding SMD type
DK1
WEB
Wire bonding mounting
GCB
Ni plating + Pd plating termination
WEB
conductive glue mounting
GCG
AgPd termination conductive glue
WEB
mounting
Lead type
Solder mounting
RCE
Chip type
GMA
WEB
Limited to Conductive Glue Mounting
KRM
KR3
WEB
Microchip
GMD
WEB
p119
RHE
150°C operation leaded
WEB
p122
RHS
200°C operation leaded
WEB
DE6
Lead type
WEB
Solder mounting
RDE
WEB
DE1
X1/Y1 Class certified product
WEB
DE2
X1/Y2 Class certified product
WEB
Medical-grade products for implanted medical devices
SMD
Solder mounting
Chip type
GCH
WEB
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
Catalog Information
Catalog relates to a multilayer ceramic capacitor is below.
Chip Multilayer Ceramic Capacitors
for General
Chip Multilayer Ceramic Capacitors
for Automotive
Cat No. C02E-22
Cat No. C03E-10
Lead Type Disc Ceramic Capacitors (Safety Standard Certified)
Resin Molding SMD Type Ceramic Capacitors (Safety Standard Certified)
Leaded MLCC
Cat No. C49E-25
Cat No. C85E-7
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
o Part Numbering
WEB
Chip Multilayer Ceramic Capacitors for General
(Part Number)
GR
M
18 8 B1 1H 102
K
1
2
3
8
4 5
6
7
A01 D
9
:
1Product ID 2Series
Product ID Code
GA
GJ
GM
GQ
GR
KR
LL
Series
2
Based on the Electrical Appliance and Material Safety Law of Japan Chip Multilayer Ceramic Capacitors for General Purpose
3
Safety Standard Certified Chip Multilayer Ceramic Capacitors for General Purpose
M
High Q Chip Multilayer Ceramic Capacitors for General Purpose
A
Wire Bonding Mount Multilayer Microchip Capacitors for General Purpose
D
Wire Bonding/AuSn Soldering Mount Chip Multilayer Ceramic Capacitors for General Purpose
M
High Q and High Power Chip Multilayer Ceramic Capacitors for General Purpose
3
High Effective Capacitance & High Ripple Current Chip Multilayer Ceramic Capacitors for General Purpose
4
Chip Multilayer Ceramic Capacitors for Information Devices only
J
Soft Termination Chip Multilayer Ceramic Capacitors for General Purpose
M
Chip Multilayer Ceramic Capacitors for General Purpose
3
High Effective Capacitance & High Allowable Ripple Current Metal Terminal Type Multilayer Ceramic Capacitors for General Purpose
M
Metal Terminal Type Multilayer Ceramic Capacitors for General Purpose
A
8 Terminals Low ESL Chip Multilayer Ceramic Capacitors for General Purpose
L
LW Reversed Low ESL Chip Multilayer Ceramic Capacitors for General Purpose
M
10 Terminals Low ESL Chip Multilayer Ceramic Capacitors for General Purpose
R
LW Reversed Controlled ESR Low ESL Chip Multilayer Ceramic Capacitors for General Purpose
3Chip Dimensions (LxW)
Code
Dimensions (LxW)
EIA
01
0.25x0.125mm
008004
02
0.4x0.2mm
01005
0D
0.38x0.38mm
015015
03
0.6x0.3mm
0201
05
0.5x0.5mm
0202
08
0.8x0.8mm
0303
1U
0.6x1.0mm
02404
15
1.0x0.5mm
0402
18
1.6x0.8mm
0603
21
2.0x1.25mm
0805
22
2.8x2.8mm
1111
31
3.2x1.6mm
1206
32
3.2x2.5mm
1210
42
4.5x2.0mm
1808
43
4.5x3.2mm
1812
52
5.7x2.8mm
2211
55
5.7x5.0mm
2220
Continued on the following page.
6
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
(Part Number)
Mar.13,2020
GR
M
18 8 B1 1H 102
K
1
2
3
8
4 5
6
7
A01 D
9
:
Continued from the preceding page.
4Height Dimension (T) (Except KRp)
4Height Dimension (T) (KRp Only)
Code
Dimension (T)
Code
Dimension (T)
1
0.125mm
E
1.8mm
2
0.2mm
F
1.9mm
3
0.3mm
K
2.7mm
4
0.4mm
L
2.8mm
5
0.5mm
R
3.6mm
6
0.6mm
Q
3.7mm
7
0.7mm
T
4.8mm
8
0.8mm
V
6.2mm
W
6.4mm
9
0.85mm
A
1.0mm
B
1.25mm
C
1.6mm
D
2.0mm
E
2.5mm
M
1.15mm
Q
1.5mm
X
Depends on individual standards.
5Temperature Characteristics
Temperature
Characteristic Codes
Code
Public
STD Code
Temperature Characteristics
Reference Temperature Capacitance Change
or Temperature
Temperature
Range
Coefficient
Operating
Temperature
Range
Capacitance Change Each Temperature (%)
–55°C
–10°C
*4
Min.
Max.
Min.
Max.
Min.
Max.
1X
SL
JIS
20°C
20 to 85°C
+350 to –1000ppm/°C
–55 to 125°C
-
-
-
-
-
-
2C
CH
JIS
20°C
20 to 125°C
0±60ppm/°C
–55 to 125°C
0.82
–0.45
0.49
–0.27
0.33
–0.18
3C
CJ
JIS
20°C
20 to 125°C
0±120ppm/°C
–55 to 125°C
1.37
–0.9
0.82
–0.54
0.55
–0.36
3U
UJ
JIS
20°C
20 to 85°C
–750±120ppm/°C
–25 to 85°C
-
-
4.94
2.84
3.29
1.89
4C
CK
JIS
20°C
20 to 125°C
0±250ppm/°C
–55 to 125°C
2.56
–1.88
1.54
–1.13
1.02
–0.75
5C
C0G
EIA
25°C
25 to 125°C
0±30ppm/°C
–55 to 125°C
0.58
–0.24
0.4
–0.17
0.25
–0.11
5G
X8G
*2
25°C
25 to 150°C
0±30ppm/°C
–55 to 150°C
0.58
–0.24
0.4
–0.17
0.25
–0.11
7U
U2J
EIA
25°C
–55 to 125°C
8.78
5.04
6.04
3.47
3.84
2.21
B1
B *1
JIS
20°C
–25 to 85°C
-
-
-
-
-
-
25 to 125°C *3 –750±120ppm/°C
–25 to 85°C
±10%
B3
B
JIS
20°C
–25 to 85°C
±10%
–25 to 85°C
-
-
-
-
-
-
C7
X7S
EIA
25°C
–55 to 125°C
±22%
–55 to 125°C
-
-
-
-
-
-
C8
X6S
EIA
25°C
–55 to 105°C
±22%
–55 to 105°C
-
-
-
-
-
-
D7
X7T
EIA
25°C
–55 to 125°C
+22%, –33%
–55 to 125°C
-
-
-
-
-
-
D8
X6T
EIA
25°C
–55 to 105°C
+22%, –33%
–55 to 105°C
-
-
-
-
-
-
E7
X7U
EIA
25°C
–55 to 125°C
+22%, –56%
–55 to 125°C
-
-
-
-
-
-
R1
R *1
JIS
20°C
–55 to 125°C
±15%
–55 to 125°C
-
-
-
-
-
-
R6
X5R
EIA
25°C
–55 to 85°C
±15%
–55 to 85°C
-
-
-
-
-
-
R7
X7R
EIA
25°C
–55 to 125°C
±15%
–55 to 125°C
-
-
-
-
-
-
*1 Capacitance change is specified with 50% rated voltage applied.
*2 Murata Temperature Characteristic Code.
*3 Rated Voltage 100Vdc max: 25 to 85°C
*4 –25°C (Reference Temperature 20°C) / –30°C (Reference Temperature 25°C)
Continued on the following page.
7
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
(Part Number)
Mar.13,2020
GR
M
18 8 B1 1H 102
K
1
2
3
8
4 5
6
7
A01 D
9
:
Continued from the preceding page.
6Rated Voltage
8Capacitance Tolerance
Code
Rated Voltage
Code
0E
DC2.5V
B
±0.1pF
0G
DC4V
C
±0.25pF
0J
DC6.3V
1A
DC10V
1C
DC16V
F
±1%
1E
DC25V
G
±2%
1H
DC50V
J
±5%
1J
DC63V
K
±10%
2A
DC100V
M
±20%
2D
DC200V
W
±0.05pF
±0.5pF (Less than 10pF)
±0.5% (10pF and over)
2E
DC250V
2W
DC450V
2H
DC500V
2J
DC630V
3A
DC1kV
9ESR (LLR Only)
3D
DC2kV
Code
ESR
3F
DC3.15kV
E01
100mΩ
E2
AC250V
E03
220mΩ
GB
X2; AC250V (Safety Standard Certified Type GB)
E05
470mΩ
GD
Y3; AC250V (Safety Standard Certified Type GD)
E07
1000mΩ
GF
Y2, X1/Y2; AC250V (Safety Standard Certified Type GF)
YA
DC35V
7Capacitance
Expressed by three-digit alphanumerics. The unit is picofarad (pF).
The first and second figures are significant digits, and the third
figure expresses the number of zeros which follow the two
numbers. If there is a decimal point, it is expressed by the capital
letter "R." In this case, all figures are significant digits.
If any alphabet, other than "R", is included, this indicates the
specific part number is a non-standard part.
Ex.)
D
Capacitance Tolerance
Code
Capacitance
R50
0.50pF
1R0
1.0pF
100
10pF
103
10000pF
9Individual Specification Code (Except LLR)
Expressed by three figures.
:Packaging
Code
Packaging
L
ø180mm Embossed Taping
D/E/W
ø180mm Paper Taping
K
ø330mm Embossed Taping
J/F
ø330mm Paper Taping
T
Bulk Tray
Please contact us if you find any part number not provided in this table.
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
WEB
3 Terminal Low ESL Multilayer Ceramic Capacitors
(Part Number)
NF
M
3D
CC 102
R
1H
3
1
2
3
4
6
7
8 9
5
C02E.pdf
Mar.13,2020
L
7Rated Voltage
1Product ID 2Series
Product ID
Series
Code
Rated Voltage
NFM
3 Terminals Low ESL
Chip Multilayer Ceramic Capacitors
0E
2.5V
3Dimensions (LxW)
0G
4V
0J
6.3V
1A
10V
Code
Dimensions (LxW)
EIA
1C
16V
15
1.0x0.5mm
0402
1E
25V
18
1.6x0.8mm
0603
1H
50V
21
2.0x1.25mm
0805
2A
100V
3D
3.2x1.25mm
1205
31
3.2x1.6mm
1206
8Electrode
41
4.5x1.6mm
1806
Code
Electrode
3
Sn Plating
4Features
Code
Features
9Packaging
CC
For Signal Lines
Code
PC
For Large Current
B
Bulk
High Insertion Loss Type
for Large Current
L
Embossed Taping (ø180mm Reel)
D
Paper Taping (ø180mm Reel)
PS
KC
For General
Packaging
For Very Large Current
5Capacitance
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.
6Characteristics
Code
Capacitance Temperature Characteristics
B
±10%, ±12.5%, +10/-13%
C
±22%
D
+22/-33%
R
±15%, +15/-18%
9
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
How to read the Capacitance Table
L×W (mm) 0.25×0.125
T max. (mm)
0.4×0.2
0.22
0.138
Rated Voltage (Vdc) 25
16
50
25
The values can be narrowed down in the order of size,
rated voltage, and temperature characteristics.
Cap. / TC Code C0G C0G C0G C∆ C0G CH
0.10pF
0.20pF p37 p38 p38 p39
Refers to the page of the part number list.
Check the part number list for the applicable product number.
2.0pF p37 p38 p38 p39
2.1pF p37 p38 p38 p39
2.3pF p37 p38 p38 p39
2.4pF p37
p38 p39
Temperature Characteristics Table
The Table is colored by temperature characteristic codes.
Refer to the following Table for the meaning of each code.
EIA: C0G U2J X7R X7S X7T X7U X6S X6T X5R
JIS:
CK
CH
CJ
SL
UJ
R
B
Murata Temperature Characteristic: X8G
Temperature
Characteristic Codes
Public
STD Code
Temperature Characteristics
Reference
Temperature
Temperature
Range
Capacitance Change
or Temperature
Coefficient
Operating
Temperature
Range
Capacitance Change Each Temperature (%)
–55°C
–10°C
*3
Max.
Min.
Max.
Min.
Max.
Min.
C0G
EIA
25°C
25 to 125°C
0±30ppm/°C
–55 to 125°C
0.58
–0.24
0.4
–0.17
0.25
–0.11
CK
JIS
20°C
20 to 125°C
0±250ppm/°C
–55 to 125°C
2.56
–1.88
1.54
–1.13
1.02
–0.75
CJ
JIS
20°C
20 to 125°C
0±120ppm/°C
–55 to 125°C
1.37
–0.9
0.82
–0.54
0.55
–0.36
CH
JIS
20°C
20 to 125°C
0±60ppm/°C
–55 to 125°C
0.82
–0.45
0.49
–0.27
0.33
–0.18
SL
JIS
20°C
20 to 85°C
+350 to –1000ppm/°C
–55 to 125°C
-
-
-
-
-
-
U2J
EIA
25°C
25 to 125°C *2
–750±120ppm/°C
–55 to 125°C
8.78
5.04
6.04
3.47
3.84
2.21
UJ
JIS
20°C
20 to 85°C
–750±120ppm/°C
–25 to 85°C
-
-
4.94
2.84
3.29
1.89
X8G
*1
25°C
25 to 150°C
0±30ppm/°C
–55 to 150°C
0.58
–0.24
0.4
–0.17
0.25
–0.11
X7R
EIA
25°C
–55 to 125°C
±15%
–55 to 125°C
-
-
-
-
-
-
X7S
EIA
25°C
–55 to 125°C
±22%
–55 to 125°C
-
-
-
-
-
-
X7T
EIA
25°C
–55 to 125°C
+22%, –33%
–55 to 125°C
-
-
-
-
-
-
X7U
EIA
25°C
–55 to 125°C
+22%, –56%
–55 to 125°C
-
-
-
-
-
-
R
JIS
20°C
–55 to 125°C
±15%
–55 to 125°C
-
-
-
-
-
-
X6S
EIA
25°C
–55 to 105°C
±22%
–55 to 105°C
-
-
-
-
-
-
X6T
EIA
25°C
–55 to 105°C
+22%, –33%
–55 to 105°C
-
-
-
-
-
-
X5R
EIA
25°C
–55 to 85°C
±15%
–55 to 85°C
-
-
-
-
-
-
B
JIS
20°C
–25 to 85°C
±10%
–25 to 85°C
-
-
-
-
-
-
*1 Murata Temperature Characteristic Code.
*2 Rated Voltage 100Vdc max: 25 to 85°C
*3 –25°C (Reference Temperature 20°C) / –30°C (Reference Temperature 25°C)
10
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
GRM Series Temperature Compensating Type
p00
← Part Number List
CK
JIS:
L×W (mm) 0.25×0.125
T max. (mm)
Rated Voltage (Vdc)
0.138
25
16
50
Cap. / TC Code C0G C0G C0G
CJ
CH
UJ
EIA: C0G
U2J
0.4×0.2
0.6×0.3
0.22
0.33
25
16
100
50
1.0×0.5
25
100
50
C∆ C0G CH C0G CH C0G C∆ C0G C∆ C0G CH C0G C0G CH
0.10pF
p42 p43 p44 p45
0.20pF p38 p39 p39 p40
p42 p43 p44 p45
2.0pF p38 p39 p39 p40
p42 p43 p44 p45
2.1pF p38 p39 p39 p40
p42 p43 p44 p45
2.3pF p38 p39 p39 p40
p42 p43 p44 p45
2.4pF p38
p39 p40
p42 p43 p44 p45
3.9pF p38
p39 p41
p42 p43 p44 p45
4.0pF p38
p39 p41
p42 p43 p44 p45
10pF p38
p40 p41
p43 p44 p45 p46
1.6×0.8
0.55
0.65
10
U2J
50
UJ
35
0.5
25
50
C0G C0G C0G U2J
10
UJ
U2J
UJ
Some description has been omitted
for less than 10 pF.
Refer to the Part Number List for
details.
11pF p38 p39 p40 p41
12pF p38 p39 p40 p41
p43 p44 p45 p46
13pF p38 p39 p40 p41
15pF p38 p39 p40 p41
p43 p44 p45 p46
16pF p38 p39 p40 p41
18pF p38 p39 p40 p41
p43 p44 p45 p46
20pF p38 p39 p40 p41
p43 p44
22pF p39 p39 p40 p41
p43 p44 p45 p46
24pF p39 p39 p40 p41
p43 p44
27pF p39 p39 p40 p41
p43 p44 p45 p46
30pF p39 p39 p40 p41
p43 p44
33pF p39 p39 p40 p41
p43 p44 p45 p46
36pF p39 p39 p40 p41
p43 p44
39pF p39 p39 p40 p41
p43 p44 p45 p46
43pF p39 p39 p40 p41
p43 p44
47pF p39 p39 p40 p41
p43 p44 p45 p46
51pF p39 p39 p40 p41
p43 p44
56pF p39 p39 p40 p41
p43 p44 p45 p46
62pF p39 p39 p40 p41
p43 p44
68pF p39 p39 p40 p41
p43 p44 p45 p46
75pF p39 p39 p40 p41
p43 p44
82pF p39 p39 p40 p41
p43 p44 p45 p46
91pF p39 p39 p40 p41
p43 p44
100pF p39 p39 p40 p41
p43 p44 p45 p46
120pF
p41 p41 p41 p42
p45 p46
150pF
p41 p41 p41 p42
p45 p46
180pF
p41 p41 p42 p42
p45 p46
220pF
p41 p41 p42 p42
p45 p46
p46
p46
270pF
p46 p46
330pF
p46 p46 p46 p46 p46
390pF
p46 p46
470pF
p46 p46 p46 p46 p46
560pF
p46 p46
680pF
p46 p46 p46 p46 p46
820pF
p46 p46
910pF
p46
1000pF
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46 p46 p46 p46
1200pF
p46
1500pF
p46
1800pF
p46
2200pF
p46
2700pF
p47 p47
p46 p46
p47 p47
p46 p46
p47 p47
3900pF
p46 p47
p47 p47
4700pF
p46 p47 p47
p47 p47
3300pF
p46
5600pF
6800pF
p47 p47
p47
p47 p47
8200pF
10000pF
p47 p47
p47 p47
p47 p47
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
56000pF
68000pF
82000pF
0.10µF
0.15µF
0.22µF
Continued on the following page.
11
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
(→ GRM Series Temperature Compensating Type)
p00
← Part Number List
JIS:
CJ
CH
UJ
EIA: C0G
U2J
1.6×0.8
L×W (mm)
2.0×1.25
0.65
0.9
T max. (mm)
Rated Voltage (Vdc) 250
CK
100
Cap. / TC Code C0G C0G
50
CH C0G CH
10
U2J
100
UJ
50
0.7
100
0.95
50
100
50
C0G C0G C0G CH C0G CH C0G CH C0G CH
1.0
10
U2J
630
UJ
250
1.35
200
100
C0G C0G U2J C0G U2J C0G CH
0.10pF
0.20pF
2.0pF
2.1pF
2.3pF
2.4pF
3.9pF
4.0pF
10pF p47
p48 p48
p48
p48 p48
p48
p48 p48
p48
p48 p48
p48
p48 p48
p48
p48 p48
p48
11pF
12pF
13pF
15pF p47
16pF
18pF
20pF
22pF p47
24pF
27pF
30pF
33pF p47
36pF
39pF
43pF
47pF p47
51pF
56pF
62pF
68pF
75pF
82pF
91pF
100pF
p48 p48 p48 p48 p48
120pF
150pF
p48 p48 p48 p48 p48
180pF
220pF
p48 p48 p48 p48 p48
270pF
330pF
p48 p48 p48 p48 p48
390pF
470pF
p48 p48 p48
p48
p48 p48
p48
p48 p48
p48
p48 p48
p48
p48 p48
p48
560pF
680pF
820pF
910pF
1000pF
p47 p47 p47 p47
p47 p48
1200pF
p47 p47 p47 p47
p47 p48
1500pF
p47 p47 p47 p47
p47 p48
1800pF
p47 p47 p47 p47
p47 p48
2200pF
p47 p47 p47 p47
p47 p48
2700pF
p47 p47 p47 p47
p47 p48 p48 p48
3300pF
p47 p47 p47 p47
p47 p48 p48 p48
3900pF
p47 p47 p47 p47
p47 p48 p48 p48
4700pF
p47 p47
5600pF
p47 p47
p47
p48 p48 p48 p48
6800pF
p47 p47
p47
p48 p48 p48 p48
8200pF
p47 p47
p47
p48 p48 p48 p48
10000pF
p47 p47
p47
p48 p48 p48 p48
p47 p48 p48 p48
12000pF
p47 p47 p47
p48 p48
15000pF
p47 p47 p47
p48 p48 p48 p48
18000pF
p47 p47
p47
22000pF
p47 p47
p47
27000pF
p47
33000pF
p47
p48 p48
39000pF
47000pF
56000pF
p48 p48
68000pF
82000pF
0.10µF
0.15µF
0.22µF
Continued on the following page.
12
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
(→ GRM Series Temperature Compensating Type)
p00
← Part Number List
JIS:
CK
Cap. / TC Code C0G
CH
UJ
EIA: C0G
U2J
3.2×1.6
2.0×1.25
L×W (mm)
1.35
T max. (mm)
Rated Voltage (Vdc)
CJ
50
CH
U2J
1.45
10
UJ
U2J
630
UJ
250
200
100
1.25
1.0
0.95
50
C0G C0G U2J U2J C0G CH C0G CH
2000
1000
630
500
1000
630
500
U2J C0G U2J C0G U2J C0G U2J C0G U2J C0G U2J C0G
0.10pF
0.20pF
2.0pF
2.1pF
2.3pF
2.4pF
3.9pF
4.0pF
10pF
p49 p49 p49 p49 p49 p50 p50
11pF
12pF
13pF
15pF
p49 p49 p49 p49 p49 p50 p50
16pF
18pF
20pF
22pF
p49 p49 p49 p49 p49 p50 p50
24pF
27pF
30pF
33pF
p49 p49 p49 p49 p49 p50 p50
36pF
39pF
43pF
47pF
p49 p49 p49 p49 p49 p50 p50
51pF
56pF
62pF
68pF
p49 p49 p49 p49 p49 p50 p50
75pF
82pF
91pF
100pF
p49 p49 p49 p49 p50 p50
120pF
150pF
p49 p49 p49 p50 p50 p50
180pF
220pF
p49 p49 p49 p50 p50 p50
270pF
330pF
p49 p49 p49 p50 p50 p50
390pF
470pF
p49
p49 p50 p50 p50
p50
560pF
680pF
p49
p50
p50 p50 p50 p50
p50
p49
p50
p50
p50
p50
p49
p49 p50
p50
p49
p50
p50
820pF
910pF
1000pF
1200pF
1500pF
1800pF
2200pF
p50
2700pF
3300pF
p49 p49 p49
p50
3900pF
4700pF
p49 p49 p49 p49
5600pF
p49 p49
6800pF
p49
8200pF
p49 p49
p49 p49
10000pF
p49
p49 p49
12000pF
p49 p49 p49 p49
15000pF
p49 p49 p49 p49
18000pF p48 p48
p49 p49 p49 p49
22000pF p48 p48
p49 p49 p49 p49
27000pF
p49 p49 p49 p49
33000pF
p49 p49 p49 p49
39000pF
p48 p48
47000pF
p48 p48
p49 p49 p49 p49
p49
56000pF
p49
68000pF
p48 p49
p49
82000pF
p48 p49
p49
0.10µF
p48 p49
p49
0.15µF
0.22µF
Continued on the following page.
13
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
(→ GRM Series Temperature Compensating Type)
p00
← Part Number List
JIS:
CK
CJ
CH
UJ
EIA: C0G
U2J
3.2×1.6
L×W (mm)
3.2×2.5
1.25
T max. (mm)
Rated Voltage (Vdc) 500 250 200
100
Cap. / TC Code U2J U2J U2J C0G
1.0
1.8
50
CH C0G CH
U2J
1000
UJ
630
500 250
100
50
C0G U2J C0G U2J U2J C0G C0G CH C0G CH
1.25
1.5
2000 630 500 2000 1000 630 500
U2J U2J U2J U2J U2J U2J U2J
0.10pF
0.20pF
2.0pF
2.1pF
2.3pF
2.4pF
3.9pF
4.0pF
10pF
11pF
12pF
13pF
15pF
16pF
18pF
20pF
22pF
24pF
27pF
30pF
33pF
36pF
39pF
43pF
47pF
51pF
56pF
62pF
68pF
75pF
82pF
91pF
100pF
p50
120pF
150pF
p50
180pF
220pF
p50
270pF
330pF
390pF
470pF
560pF
680pF
820pF
910pF
1000pF
p50 p50
1200pF
1500pF
p50 p50
p50
1800pF
2200pF
p50 p50
2700pF
3300pF p50
p50
3900pF
4700pF
p50 p50 p50
5600pF
6800pF
p50 p50
p50
p50 p50
p50
p50 p50
8200pF
10000pF
12000pF
15000pF
p50
18000pF
22000pF
p50
27000pF
33000pF
39000pF
47000pF
p50 p50 p50 p50
56000pF
p50 p50 p50 p50
68000pF
p50 p50
p50 p50 p50 p50
82000pF
p50 p50
p50 p50 p50 p50
0.10µF
p50 p50
p50 p50 p50 p50
0.15µF
p50
0.22µF
p50
Continued on the following page.
14
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
Capacitance Table
(→ GRM Series Temperature Compensating Type)
p00
← Part Number List
L×W (mm)
T max. (mm)
JIS:
CK
3.2×2.5
2.0
CJ
CH
4.5×
2.0
2.7
1.0
UJ
EIA: C0G
4.5×3.2
1.5
2.0
U2J
5.7×5.0
1.5
2.0
Rated Voltage (Vdc) 1000 630 500 630 3150 1000 1000 630 500 1000 1000 630 500
Cap. / TC Code U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J
0.10pF
0.20pF
2.0pF
2.1pF
2.3pF
2.4pF
3.9pF
4.0pF
10pF
p51
11pF
12pF
13pF
15pF
p51
16pF
18pF
20pF
22pF
p51
24pF
27pF
30pF
33pF
p51
36pF
39pF
43pF
47pF
p51
51pF
56pF
62pF
68pF
p51
75pF
82pF
91pF
100pF
p51
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
910pF
1000pF
1200pF
1500pF
1800pF
2200pF p50
2700pF
3300pF
p51
3900pF
4700pF
p51
5600pF
6800pF
p51
8200pF
10000pF
p51
p50 p50
12000pF
15000pF
p50
p51 p51
18000pF
22000pF
p51 p51
27000pF
33000pF
p51 p51
39000pF
47000pF
p51 p51
56000pF
68000pF
82000pF
0.10µF
0.15µF
0.22µF
15
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
GRM Series High Dielectric Constant Type
p00
← Part Number List
R
JIS:
B
EIA: X7R X7S
L×W (mm) 0.25×0.125
T max. (mm)
6.3
X6T X5R
0.4×0.2
0.6×0.3
0.22
0.138
Rated Voltage (Vdc) 10
X7T X7U X6S
16
10
Cap. / TC Code X5R X5R X7R X5R X7R X5R
0.25
6.3
B
X5R
4
B
2.5
4
0.33
2.5
50
X6T X5R X6T X6T X7T X6T X7R X5R
35
B
25
X5R X7R
R
100pF p52
p52
p52 p52 p52
p53
p53
p53
150pF
p52
p52 p52 p52
p53
p53
p53
220pF p52
p52
p52 p52 p52
p53
p53
p53
330pF
p52
p52 p52 p52
p53
p53
p53
470pF p52
p52
p52 p52 p52
p53 p53 p53
p53
680pF
p52 p52 p52
p53
p53
p53
820pF
p52
16
X6S X5R
B
X7∆
R
1000pF
p52 p52 p52 p52 p52 p52 p53 p53
p53
p53
p53 p53
p54
1500pF
p52
p53
p53
p53 p53
p54
2200pF
p52
p52 p52 p53 p53
p53
p54 p54 p54
3300pF
p52
p52 p52 p53 p53
p53
4700pF
p52
p52 p52 p53 p53
p53
p53
p54
6800pF
p52
p52 p52 p53 p53
p53
p53
p54
10000pF
p52
p52 p52 p53 p53
p53
p53 p54 p54
p52 p52 p53 p53
p52
p52
p52
15000pF
p53
p53
22000pF
p53
p53
33000pF
p53
p53
47000pF
p53
p53
68000pF
p53
p53
0.10µF
p53
p53 p53 p53
p53
p54 p54 p54
p53 p53
p54
0.15µF
0.22µF
p53
0.33µF
0.47µF
p53 p53 p53
0.68µF
1.0µF
2.2µF
4.7µF
10µF
22µF
47µF
100µF
220µF
Continued on the following page.
16
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
(→ GRM Series High Dielectric Constant Type)
p00
← Part Number List
JIS:
R
B
EIA: X7R X7S
X6T X5R
0.6×0.3
L×W (mm)
1.0×0.5
0.33
T max. (mm)
Rated Voltage (Vdc)
X7T X7U X6S
10
16
Cap. / TC Code X6S X5R
0.39
B
X7∆
R
X5R
6.3
B
X7R
R
X6S X5R
4
B
10
6.3
4
0.22
2.5 6.3
4
0.33
10
X6S X5R X7T X7T X7T X5R X6T X5R X5R
6.3
B
X6T X5R
4
B
X6T
100pF
150pF
220pF
330pF
470pF
680pF
820pF
1000pF
1500pF
2200pF
p54
3300pF
p54
4700pF
p54 p54 p54 p54 p54 p54
p55
6800pF
p54 p54 p54 p54 p54 p54
p55
10000pF
p54 p54 p54 p54
15000pF
p54 p54
p54 p54
p55
p55
22000pF
p54 p54
p54 p54
p55
p55
33000pF
p54 p54
p54 p54
p55
p55
47000pF
p54 p54
p54 p54
p55
68000pF
p54 p54
p54 p54
p55
p54 p54
p55
p54
p55 p55
0.10µF p54 p54 p54 p54
p54 p54
0.15µF
0.22µF
p54
p55
0.33µF
0.47µF
0.68µF
1.0µF
p55 p55 p55 p55 p55 p55 p55 p55 p55 p55 p55 p55 p55
2.2µF
4.7µF
10µF
22µF
47µF
100µF
220µF
Continued on the following page.
17
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
(→ GRM Series High Dielectric Constant Type)
p00
← Part Number List
R
JIS:
B
EIA: X7R X7S
X7T X7U X6S
X6T X5R
1.0×0.5
L×W (mm)
0.6
0.55
T max. (mm)
50
Rated Voltage (Vdc) 100
Cap. / TC Code X7R X7R
R
X5R
35
B
25
X6S X7R X5R
16
B
X7R X5R
10
B
X7R X6S
6.3
B
X7R X6S
4
B
50
35
25
16
4
6.3
X7R X5R X5R X6S X6S X5R
B
X5R
100pF
150pF
220pF p55
330pF
470pF p55
680pF
820pF
1000pF p55
1500pF
2200pF p55 p55 p55
3300pF
4700pF p55 p55 p55
6800pF
10000pF
p55 p55
15000pF
22000pF
p55
p55
p55
p55
33000pF
47000pF
68000pF
0.10µF
p55
p55
p55 p55
0.15µF
0.22µF
p55
p55
p55
0.33µF
0.47µF
p55
p55
0.68µF
1.0µF
2.2µF
4.7µF
p55 p55
p55 p55
p55
p55
p55
p55
p55 p55 p55
p55 p55
p55 p55 p55
10µF
22µF
47µF
100µF
220µF
Continued on the following page.
18
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
(→ GRM Series High Dielectric Constant Type)
p00
← Part Number List
JIS:
R
B
EIA: X7R X7S
X7T X7U X6S
X6T X5R
1.6×0.8
1.0×0.5
L×W (mm)
0.6
T max. (mm)
0.65
25
16
0.7
10
6.3
25
16
10
0.5
6.3
4
2.5 6.3
0.9
0.55
Rated Voltage (Vdc)
4
2.5
4
16
10
6.3
25
Cap. / TC Code
B
X6T X6T X7T X6T X7T X5R X6S X5R X6S X5R X7S X6S X7S X5R X5R X5R X5R X5R X5R X6S X7T X6S X5R
16
B
X6S
100pF
150pF
220pF
330pF
470pF
680pF
820pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
33000pF
47000pF
68000pF
0.10µF
0.15µF
0.22µF
0.33µF
0.47µF
0.68µF
1.0µF
2.2µF
4.7µF p55 p55
10µF
p55 p55 p55 p56
p56 p56 p56 p56 p56 p56
p56 p56 p56
p56 p56
p56 p56 p56 p56
p56 p56 p56 p56 p56
22µF
47µF
100µF
220µF
Continued on the following page.
19
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
(→ GRM Series High Dielectric Constant Type)
p00
← Part Number List
JIS:
R
B
EIA: X7R X7S
X7T X7U X6S
1.6×0.8
L×W (mm)
T max. (mm)
Rated Voltage (Vdc) 10
X6T X5R
0.9
0.95
6.3
Cap. / TC Code X7R X5R
4
B
25
1.0
16
X5R X5R X6S X5R
10
B
X7S X5R
50
B
35
25
16
10
6.3
X5R X6S X5R X7S X6S X5R X7S X6S X7T X7T X5R
4
B
X6S X5R
B
100pF
150pF
220pF
330pF
470pF
680pF
820pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
33000pF
47000pF
68000pF
0.10µF
0.15µF
0.22µF
0.33µF
0.47µF
0.68µF
1.0µF
2.2µF p56
p56 p56
4.7µF
10µF
22µF
p56 p56 p56 p56 p56
p56 p56 p56
p56
p56 p56
p56
p56 p56
p56
p56
p56
p56
p56 p56 p56
p56 p56 p56 p56 p56
47µF
100µF
220µF
Continued on the following page.
20
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
(→ GRM Series High Dielectric Constant Type)
p00
← Part Number List
JIS:
R
B
EIA: X7R X7S
X7T X7U X6S
1.0
1.35
2.0×1.25
L×W (mm)
T max. (mm)
Rated Voltage (Vdc) 35
X6T X5R
0.95
25
4
2.5
35
25
16
16
Cap. / TC Code X5R X5R X5R X6T X6S X7S X6S X7S X5R X5R
1.4
50
B
X5R
1.45
25
B
X7R X5R
16
B
4
100
50
35
25
X6S X7U X7S X7S X6S X7S X6S X5R X7S X6S
100pF
150pF
220pF
330pF
470pF
680pF
820pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
33000pF
47000pF
68000pF
0.10µF
0.15µF
0.22µF
0.33µF
0.47µF
0.68µF
1.0µF
p57
2.2µF
p57
4.7µF p56 p56
p56 p56 p56 p56
p56 p56
10µF
p56 p56
22µF
47µF
p56
p57 p57 p57
p57 p57 p57
p57
p57 p57 p57 p57
p57
p56 p56
100µF
220µF
Continued on the following page.
21
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
(→ GRM Series High Dielectric Constant Type)
p00
← Part Number List
JIS:
R
B
EIA: X7R X7S
X7T X7U X6S
X6T X5R
2.0×1.25
L×W (mm)
3.2×1.6
1.45
T max. (mm)
Rated Voltage (Vdc) 25
16
10
0.95
6.3
Cap. / TC Code X5R X7S X6S X5R X7T X6S X5R X7T X5R
4
B
X6S X5R
2.5
B
16
X6S X5R
1.8
50
B
25
10
1.9
6.3
4
100 50
X7R X7R X7R X5R X7R X7U X5R X7U X7S X7T
100pF
150pF
220pF
330pF
470pF
680pF
820pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
33000pF
47000pF
68000pF
0.10µF
0.15µF
0.22µF
0.33µF
0.47µF
0.68µF
1.0µF
2.2µF
4.7µF
10µF
22µF p57
47µF
100µF
p57
p57
p57
p57
p57 p57 p57 p57 p57 p57
p57
p57 p57
p57 p57 p57 p57 p57
p57
p57
p57
p57
p57
p57
p57 p57 p57
p57
220µF
Continued on the following page.
22
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
(→ GRM Series High Dielectric Constant Type)
p00
← Part Number List
R
JIS:
B
EIA: X7R X7S
X6T X5R
3.2×1.6
L×W (mm)
3.2×2.5
1.9
T max. (mm)
Rated Voltage (Vdc) 35
X7T X7U X6S
25
16
10
4.5×3.2
2.7
6.3
4
2.5 100 25
16
2.8
10
6.3
4
6.3
1.5
4
630 500 250
Cap. / TC Code X7T X6S X7S X5R X6S X5R X6T X5R X7U X6T X5R X5R X7S X7R X7R X6S X7R X5R X7R X7U X7U X5R X5R X7R X7R X7R
100pF
150pF
220pF
330pF
470pF
680pF
820pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
33000pF
47000pF
68000pF
p57
0.10µF
0.15µF
p57 p57
0.22µF
0.33µF
0.47µF
0.68µF
1.0µF
2.2µF
4.7µF
10µF p57
22µF
47µF
100µF
220µF
p57
p57 p57
p57 p57
p57 p57
p57 p57
p57 p57 p57 p57 p57 p57
p57
p57 p57
p57
p57
p57 p57
p57 p57
Continued on the following page.
23
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
Capacitance Table
(→ GRM Series High Dielectric Constant Type)
p00
← Part Number List
L×W (mm)
T max. (mm)
JIS:
R
B
EIA: X7R X7S
4.5×3.2
5.7×5.0
2.0
2.0
X7T X7U X6S
X6T X5R
Rated Voltage (Vdc) 1000 630 500 250 1000 630 500 250 200
Cap. / TC Code X7R X7R X7R X7R X7R X7R X7R X7R X7R
100pF
150pF
220pF
330pF
470pF
680pF
820pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
33000pF p57
47000pF p57
68000pF
0.10µF
p58
p57
p58
0.15µF
p58
0.22µF
p57 p58
0.33µF
p58
p58 p58 p58
0.47µF
p58
p58 p58 p58
p58
0.68µF
p58 p58
1.0µF
p58 p58
2.2µF
4.7µF
10µF
22µF
47µF
100µF
220µF
24
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
GR3 Series High Dielectric Constant Type
p00
← Part Number List
EIA: X7T
3.2×1.6
L×W (mm) 2.0×1.25
T max. (mm) 1.0 1.45
1.0
3.2×2.5
1.25
1.8
1.5
4.5×3.2
2.0
1.5
5.7×5.0
2.0
2.0
2.7
Rated Voltage (Vdc) 250 250 450 250 630 450 250 630 450 250 630 250 630 450 250 250 630 450 250 630 450 250 630 250
Cap. / TC Code X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T
10000pF p60
p60
15000pF p60
p60
22000pF
p60
p60
p60
33000pF
p60
p60
p60
p60
47000pF
p60
p60
p60
68000pF
p60
p60
p60
0.10µF
p60
p60
p60
0.15µF
p60
p60
0.22µF
p60
p60
p60
0.33µF
p60
p60
p60
p60
0.47µF
p60 p60
0.68µF
p60
1.0µF
p60
GRJ Series High Dielectric Constant Type
p00
← Part Number List
EIA: X7R X7S X5R
L×W (mm) 2.0×1.25
T max. (mm) 1.45 1.5
3.2×1.6
3.2×2.5
1.9
2.8 2.85
Rated Voltage (Vdc) 25 100 100 50
10
5.7×5.0
4.5×3.2
2.0
1.5
2.0
25 630 250 1000 630 250 1000 630 250
Cap. / TC Code X5R X7S X7S X7R X7R X7S X7R X7R X7R X7R X7R X7R X7R X7R
33000pF
p62
47000pF
p62
68000pF
p62
p62
0.10µF
p62
0.15µF
p62
p62
p62
0.22µF
p62
0.33µF
p62
p62
0.47µF
p62
p62
0.68µF
1.0µF
4.7µF
p62
p62
p62
p62
p62 p62
10µF p62
22µF
47µF
p62
p62
25
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
Capacitance Table
GR4 Series Temperature Compensating Type
p00
← Part Number List
L×W (mm)
EIA: U2J
3.2×1.6
T max. (mm) 1.0 1.25 1.8
3.2×2.5
1.5 2.0 2.7
Rated Voltage (Vdc) 630 630 630 630 630 630
Cap. / TC Code U2J U2J U2J U2J U2J U2J
1000pF p64
1500pF p64
2200pF p64
3300pF
p64
4700pF
p64
6800pF
p64
10000pF
p64
15000pF
p64
GR4 Series High Dielectric Constant Type
p00
← Part Number List
L×W (mm) 4.5×
2.0
T max. (mm) 1.5
EIA: X7R
4.5×3.2
5.7×
5.0
1.5 2.0 2.0
Rated Voltage (Vdc) 2000 2000 2000 2000
Cap. / TC Code X7R X7R X7R X7R
100pF p65
120pF p65
150pF p65
180pF p65
220pF p65
270pF p65
330pF p65
390pF p65
470pF p65
560pF p65
680pF p65
820pF p65
1000pF p65
1200pF p65
1500pF p65
1800pF
p65
2200pF
p65
2700pF
p65
3300pF
p65
3900pF
p65
4700pF
10000pF
p65
p65
26
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
GJM Series Temperature Compensating Type
p00
← Part Number List
L×W (mm)
T max. (mm)
Rated Voltage (Vdc)
JIS:
CK
CJ
CH
EIA: C0G
0.4×0.2
0.6×0.3
1.0×0.5
0.22
0.33
0.55
25
100
50
25
50
Cap. / TC Code C0G C∆ C0G C∆ X8G C0G C0G C∆ C0G C∆
0.10pF
Murata Temperature Characteristic: X8G
L×W (mm)
T max. (mm)
Rated Voltage (Vdc)
0.4×0.2
0.6×0.3
0.22
0.33
25
100
50
1.0×0.5
0.55
25
50
Cap. / TC Code C0G C∆ C0G C∆ X8G C0G C0G C∆ C0G C∆
p73 p76
5.9pF p67 p68 p69 p70
p71 p72 p74 p78
p71
p73 p76
6.0pF p67 p68 p69 p70
p71 p72 p74 p78
0.30pF p67 p68 p69 p69 p70 p71
p73 p76
6.1pF p67 p68 p69 p70
p71 p72 p74 p78
0.40pF p67 p68 p69 p69 p70 p71
p73 p76
6.2pF p67 p68 p69 p70 p71
p71 p72 p75 p78
0.50pF p67 p68 p69 p69 p70 p71
p73 p76
6.3pF p67 p68 p69 p70
p71 p72 p75 p78
0.60pF p67 p68 p69 p69 p70 p71
p73 p76
6.4pF p67 p68 p69 p70
p71 p72 p75 p78
0.70pF p67 p68 p69 p70 p70 p71
p73 p76
6.5pF p67 p68 p69 p70
p71 p72 p75 p78
0.80pF p67 p68 p69 p70 p70 p71
p73 p76
6.6pF p67 p68 p69 p70
p71 p72 p75 p78
0.90pF p67 p68 p69 p70 p70 p71
p73 p76
6.7pF p67 p68 p69 p70
p71 p72 p75 p78
0.20pF p67 p68
1.0pF p67 p68 p69 p70 p70
p71 p72 p73 p76
6.8pF p67 p68 p69 p70 p71
p71 p72 p75 p78
1.1pF p67 p68 p69 p70 p70
p71 p72 p73 p77
6.9pF p67 p68 p69 p70
p71 p72 p75 p78
1.2pF p67 p68 p69 p70 p70
p71 p72 p73 p77
7.0pF p67 p68 p69 p70
p71 p72 p75 p78
1.3pF p67 p68 p69 p70 p71
p71 p72 p73 p77
7.1pF p67 p68 p69 p70
p71 p72 p75 p78
1.4pF p67 p68 p69 p70
p71 p72 p73 p77
7.2pF p67 p68 p69 p70
p71 p72 p75 p78
1.5pF p67 p68 p69 p70 p71
p71 p72 p73 p77
7.3pF p67 p68 p69 p70
p71 p72 p75 p78
1.6pF p67 p68 p69 p70 p71
p71 p72 p73 p77
7.4pF p67 p68 p69 p70
p71 p72 p75 p78
1.7pF p67 p68 p69 p70
p71 p72 p73 p77
7.5pF p67 p68 p69 p70 p71 p71 p71 p72 p75 p79
1.8pF p67 p68 p69 p70 p71
p71 p72 p73 p77
7.6pF p67 p68 p69 p70
p71 p72 p75 p79
1.9pF p67 p68 p69 p70
p71 p72 p73 p77
7.7pF p67 p68 p69 p70
p71 p72 p75 p79
2.0pF p67 p68 p69 p70 p71
p71 p72 p73 p77
7.8pF p67 p68 p69 p70
p71 p72 p75 p79
2.1pF p67 p68 p69 p70
p71 p72 p73 p77
7.9pF p67 p68 p69 p70
p71 p72 p75 p79
2.2pF p67 p68 p69 p70 p71
p71 p72 p73 p77
8.0pF p67 p68 p69 p70
p72 p72 p75 p79
2.3pF p67 p68 p69 p70
p71 p72 p73 p77
8.1pF p67 p68 p69 p70
p72 p72 p75 p79
2.4pF p67 p68 p69 p70 p71
p71 p72 p73 p77
8.2pF p67 p68 p69 p70 p71 p71 p72 p72 p75 p79
2.5pF p67 p68 p69 p70
p71 p72 p73 p77
8.3pF p67 p68 p69 p70
p72 p72 p75 p79
2.6pF p67 p68 p69 p70
p71 p72 p73 p77
8.4pF p67 p68 p69 p70
p72 p72 p75 p79
2.7pF p67 p68 p69 p70 p71
p71 p72 p73 p77
8.5pF p67 p68 p69 p70
p72 p73 p75 p79
2.8pF p67 p68 p69 p70
p71 p72 p73 p77
8.6pF p67 p68 p69 p70
p72 p73 p75 p79
2.9pF p67 p68 p69 p70
p71 p72 p74 p77
8.7pF p67 p68 p69 p70
p72 p73 p75 p79
3.0pF p67 p68 p69 p70 p71
p71 p72 p74 p77
8.8pF p67 p68 p69 p70
p72 p73 p75 p79
3.1pF p67 p68 p69 p70
p71 p72 p74 p77
8.9pF p67 p68 p69 p70
p72 p73 p76 p79
3.2pF p67 p68 p69 p70
p71 p72 p74 p77
9.0pF p67 p68 p69 p70
p72 p73 p76 p79
3.3pF p67 p68 p69 p70 p71
p71 p72 p74 p77
9.1pF p67 p68 p69 p70 p71 p71 p72 p73 p76 p79
3.4pF p67 p68 p69 p70
p71 p72 p74 p77
9.2pF p67 p68 p69 p70
p72 p73 p76 p79
3.5pF p67 p68 p69 p70
p71 p72 p74 p77
9.3pF p67 p68 p69 p70
p72 p73 p76 p79
3.6pF p67 p68 p69 p70 p71
p71 p72 p74 p77
9.4pF p67 p68 p69 p70
p72 p73 p76 p79
3.7pF p67 p68 p69 p70
p71 p72 p74 p77
9.5pF p67 p68 p69 p70
p72 p73 p76 p79
3.8pF p67 p68 p69 p70
p71 p72 p74 p77
9.6pF p67 p68 p69 p70
p72 p73 p76 p79
3.9pF p67 p68 p69 p70 p71
p71 p72 p74 p77
9.7pF p67 p68 p69 p70
p72 p73 p76 p79
4.0pF p67 p68 p69 p70
p71 p72 p74 p77
9.8pF p67 p68 p69 p70
p72 p73 p76 p79
4.1pF p67 p68 p69 p70
p71 p72 p74 p77
9.9pF p67 p68 p69 p70
p72 p73 p76 p79
4.2pF p67 p68 p69 p70
p71 p72 p74 p77
10pF p67 p68 p69 p70 p71 p71 p72 p73 p76 p79
4.3pF p67 p68 p69 p70 p71
p71 p72 p74 p77
11pF p67 p68 p69 p70
4.4pF p67 p68 p69 p70
p71 p72 p74 p77
12pF p67 p68 p69 p70 p71 p71 p72 p73 p76 p79
4.5pF p67 p68 p69 p70
p71 p72 p74 p77
13pF p67 p68 p69 p70
4.6pF p67 p68 p69 p70
p71 p72 p74 p77
15pF p67 p68 p69 p70 p71 p71 p72 p73 p76 p80
4.7pF p67 p68 p69 p70 p71
p71 p72 p74 p78
16pF p67 p68
p72 p73 p76 p80
4.8pF p67 p68 p69 p70
p71 p72 p74 p78
18pF p67 p68
p72 p73 p76 p80
4.9pF p67 p68 p69 p70
p71 p72 p74 p78
20pF p67 p68
p72 p73 p76 p80
5.0pF p67 p68 p69 p70
p71 p72 p74 p78
22pF p68 p68
p72 p73 p76 p80
5.1pF p67 p68 p69 p70 p71
p71 p72 p74 p78
24pF
p72 p73 p76 p80
5.2pF p67 p68 p69 p70
p71 p72 p74 p78
27pF
p72 p73 p76 p80
5.3pF p67 p68 p69 p70
p71 p72 p74 p78
30pF
p72 p73 p76 p80
5.4pF p67 p68 p69 p70
p71 p72 p74 p78
33pF
p72 p73 p76 p80
5.5pF p67 p68 p69 p70
p71 p72 p74 p78
36pF
p76 p80
5.6pF p67 p68 p69 p70 p71
p71 p72 p74 p78
39pF
p76 p80
5.7pF p67 p68 p69 p70
p71 p72 p74 p78
43pF
p76 p80
5.8pF p67 p68 p69 p70
p71 p72 p74 p78
47pF
p76 p80
p72 p73 p76 p79
p72 p73 p76 p80
27
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
Capacitance Table
GQM Series High Dielectric Constant Type
p00
← Part Number List
L×W (mm)
T max. (mm)
EIA: C0G
Murata Temperature Characteristic: X8G
1.0×0.5
1.6×0.8
2.0×1.25
2.8×
2.8
0.55
0.8
1.0
1.35
Rated Voltage (Vdc) 200 100
250
500
250
500
Cap. / TC Code C0G C0G C0G X8G X8G C0G X8G C0G
0.10pF p82
1.0pF p82
p83 p83 p84 p85 p86 p87
1.1pF p82
p83 p83 p84 p85 p86 p87
1.2pF p82
p83 p84 p84 p85 p86 p87
1.3pF p82
p83 p84 p84 p85 p86 p87
1.5pF p82
p83 p84 p84 p85 p86 p87
1.6pF p82
p83 p84 p84 p85 p86 p87
1.8pF p82
p83 p84 p84 p85 p86 p87
2.0pF p82
p83 p84 p84 p85 p86 p87
2.2pF p82
p83 p84 p84 p85 p86 p87
2.4pF p82
p83 p84 p84 p85 p86 p87
2.7pF p82
p83 p84 p84 p85 p86 p87
3.0pF p82
p83 p84 p85 p85 p86 p87
3.3pF p82
p83 p84 p85 p85 p86 p87
3.6pF p82
p83 p84 p85 p85 p86 p87
3.9pF p82
p83 p84 p85 p85 p86 p87
4.0pF p82
p83 p84 p85 p85 p86 p87
4.3pF p82
p83 p84 p85 p85 p86 p87
4.7pF p82
p83 p84 p85 p85 p86 p87
5.0pF p82
p83 p84 p85 p85 p86 p87
5.1pF p82
p83 p84 p85 p85 p86 p87
5.6pF p82
p83 p84 p85 p85 p86 p87
6.0pF p82
p83 p84 p85 p85 p86 p87
6.2pF p82
p83 p84 p85 p85 p86 p87
6.8pF p82
p83 p84 p85 p85 p86 p87
7.0pF p82
p83 p84 p85 p85 p86 p88
7.5pF p82
p83 p84 p85 p85 p87 p88
8.0pF p82
p83 p84 p85 p86 p87 p88
8.2pF p82
p83 p84 p85 p86 p87 p88
9.0pF p82
p83 p84 p85 p86 p87 p88
9.1pF p82
p83 p84 p85 p86 p87 p88
10pF p82
p83 p84 p85 p86 p87 p88
11pF p82
p83 p84 p85 p86 p87 p88
12pF p82
p83 p84 p85 p86 p87 p88
13pF p82
p83 p84 p85 p86 p87 p88
15pF p82
p83 p84 p85 p86 p87 p88
16pF p82
p83 p84 p85 p86 p87 p88
18pF p82
p83 p84 p85 p86 p87 p88
20pF p82
p83 p84 p85 p86 p87 p88
22pF p82
p83 p84 p85 p86 p87 p88
24pF p82
p83 p84
p86 p87 p88
27pF p82
p83 p84
p86 p87 p88
30pF p82
p83 p84
p86 p87 p88
33pF p82
p83
p86 p87 p88
36pF
p82 p83
p86 p87 p88
39pF
p83 p83
p86 p87 p88
43pF
p83 p83
p86 p87 p88
47pF
p83 p83
p86 p87 p88
51pF
p86 p87 p88
56pF
p86 p87 p88
62pF
p86 p87 p88
68pF
p86 p87 p88
75pF
p86 p87 p88
82pF
p86 p87 p88
91pF
p86
p88
100pF
p86
p88
The indication for every 0.1 pF has
been omitted for less than 1.0 pF.
Refer to the Part Number List for
details.
28
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
GA2 Series High Dielectric Constant Type
p00
← Part Number List
L×W (mm) 4.5×
2.0
EIA: X7R
GA3 Series Type GD Temperature Compensating Type
p00
← Part Number List
5.7×
5.0
L×W (mm) 4.5×
2.0
1.5 2.0 2.0
T max. (mm) 1.0
Rated Voltage (Vac(r.m.s.)) 250 250 250 250
Rated Voltage (Vac(r.m.s.)) 250
T max. (mm) 1.5
4.5×3.2
Cap. / TC Code X7R X7R X7R X7R
JIS:
SL
Cap. / TC Code SL
470pF p90
10pF p95
1000pF p90
12pF p95
2200pF
p90
3300pF
p90
4700pF
15pF p95
18pF p95
22pF p95
p90
10000pF
p90
22000pF
p90
47000pF
27pF p95
33pF p95
39pF p95
p90
0.10µF
47pF p95
p90
56pF p95
68pF p95
GA3 Series Type GB High Dielectric Constant Type
p00
← Part Number List
L×W (mm)
T max. (mm) 1.5
EIA: X7R
GA3 Series Type GD High Dielectric Constant Type
5.7×5.0
2.0 2.5 2.9
Rated Voltage (Vac(r.m.s.)) 250 250 250 250
Cap. / TC Code X7R X7R X7R X7R
10000pF p93
15000pF p93
22000pF
p00
← Part Number List
EIA: X7R
L×W (mm) 4.5×
2.0
4.5×3.2
T max. (mm) 1.5
1.5 2.0
Rated Voltage (Vac(r.m.s.)) 250 250 250
Cap. / TC Code X7R X7R X7R
p93
33000pF
p93
47000pF
p93
56000pF
82pF p95
100pF p96
150pF p96
p93
220pF p96
330pF p96
470pF p96
680pF p96
1000pF p96
1500pF p96
1800pF
p96
2200pF
p96
4700pF
p96
29
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
Capacitance Table
GA3 Series Type GF Temperature Compensating Type
p00
← Part Number List
JIS:
SL
L×W (mm) 4.5×
2.0
T max. (mm) 1.0
Rated Voltage (Vac(r.m.s.)) 250
Cap. / TC Code SL
10pF p99
12pF p99
15pF p99
18pF p99
22pF p99
27pF p99
33pF p99
39pF p99
47pF p99
56pF p99
68pF p99
82pF p99
GA3 Series Type GF High Dielectric Constant Type
p00
← Part Number List
L×W (mm)
EIA: X7R
4.5×2.0
T max. (mm) 1.5
5.7×
2.8
5.7×5.0
2.2 1.5 1.5 2.0
Rated Voltage (Vac(r.m.s.)) 250 250 250 250 250
Cap. / TC Code X7R X7R X7R X7R X7R
100pF p100
150pF p100
p100
p100
220pF
p100 p100
330pF
p100 p100
470pF p100
680pF p100
p100
p100
1000pF
p100 p100
1500pF
p100
1800pF
p100
2200pF
p100
3300pF
p100
4700pF
p100
30
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
LLL Series High Dielectric Constant Type
p00
← Part Number List
L×W (mm)
EIA: X7R X7S
0.5×1.0
0.6×
1.0
0.35
0.45
T max. (mm)
Rated Voltage (Vdc) 6.3
4
4
X6S X5R
0.8×1.6
0.5
25
16
1.25×2.0
0.55
10
4
4
0.6
50
25
16
0.5
10
4
50
25
16
10
0.7
6.3
4
50
25
0.95
10
16
10
4
Cap. / TC Code X6S X7S X6S X5R X7R X7R X7R X7S X7S X7R X7R X7R X7R X7S X7R X7R X7R X7R X7R X7S X7R X7R X7R X7R X7R X7S
2200pF
p102
4700pF
p102
10000pF
p102
p102
22000pF
p102
47000pF
p102
0.10µF p102
p102
p102
p102
p102
p102
p102
p102
p102
p102 p102
p102
p102
p102
p102
2.2µF
p102
4.3µF
p102
p102
p102
p102
1.0µF
p102
p102
p102
0.22µF p102
0.47µF
p102
p102
p102
p102
p102
4.7µF
10µF
Continued to the following table.
1.6×3.2
L×W (mm)
0.5
T max. (mm)
Rated Voltage (Vdc) 50
25
16
0.8
10
50
25
16
1.25
10
6.3
50
25
16
10
6.3
Cap. / TC Code X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X5R
2200pF
4700pF
10000pF p102
p102
22000pF p102
p102
47000pF
p102
0.10µF
p102
0.22µF
p102
p102
p102
0.47µF
p102
p102
p102
p102
p102
1.0µF
p102
p102
2.2µF
p102
p102
p102
4.3µF
4.7µF
p102
10µF
p102
LLA Series High Dielectric Constant Type
p00
← Part Number List
EIA: X7R X7S
L×W (mm) 1.6×
0.8
2.0×1.25
T max. (mm) 0.55
Rated Voltage (Vdc)
4
0.95
0.55
25
16
10
6.3
4
25
16
10
6.3
4
Cap. / TC Code X7S X7R X7R X7R X7R X7S X7R X7R X7R X7R X7S
10000pF
p104
22000pF
p104
47000pF
0.10µF p104
0.22µF p104
0.47µF p104
1.0µF
p104
p104
p104
p104
p104
p104
p104
p104
p104
p104
p104
2.2µF p104
4.7µF
p104
p104
p104
31
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
LLM Series High Dielectric Constant Type
p00
← Part Number List
LLR Series High Dielectric Constant Type
EIA: X7R X7S
p00
← Part Number List
2.0×1.25
L×W (mm)
Rated Voltage (Vdc) 25
16
6.3
0.8×1.6
L×W (mm)
0.55
T max. (mm)
0.55
T max. (mm)
4
EIA: X7S
4
Rated Voltage (Vdc)
Cap. / TC Code X7R X7R X7R X7S
X7S
TC Code
Cap. / ESR (mΩ) 100 220 470 1000
10000pF p106
22000pF p106
1.0µF p108 p108 p108 p108
47000pF
p106
0.10µF
p106
0.22µF
p106
0.47µF
p106
1.0µF
p106
NFM Series
p00
← Part Number List
1.0×0.5
L×W (mm)
T max. (mm)
0.35
Rated Voltage (Vdc) 6.3
Cap. / TC Code
-
1.6×0.8
0.65 0.7
0.5
4
16
10
-
-
-
0.7
6.3 2.5 2.5 2.5
-
-
-
-
2.0×1.25
3.2×
1.25
3.2×1.6
4.5×1.6
0.95
0.9
1.5
1.2
50 100 50
6.3 100 50
0.9
16
6.3
10
6.3
50
25
16
10
6.3
-
-
-
-
-
-
-
-
-
-
-
-
-
-
100pF
p111
220pF
p111
p111
p111
470pF
p111
p111
p111
p111
1000pF
p111
p111
p111
p111
p111
p111
p111
2200pF
p111 p111
10000pF
25
-
p111
p111 p111
15000pF
p111 p111
22000pF
p111 p111
47000pF
p111 p111
0.10µF
p111 p111
0.22µF
p111 p111
p111
p111
p111
p111
p111 p111
p111
p111
p111
p111
p111 p111 p111
p111
p111
0.47µF p111 p111
1.0µF
-
p111
p111
p111 p111
1.5µF
p111 p111
2.2µF
p111 p111
4.3µF
p111
p111
4.7µF
p111
7.5µF
p111
9.1µF
p111
10µF
p111
27µF
p111
KRM Series Temperature Compensating Type
p00
← Part Number List
L×W (mm)
T max. (mm) 3.1
EIA: C0G
6.1×5.1
3.9 5.1 6.6
Rated Voltage (Vdc) 630 630 630 630
Cap. / TC Code C0G C0G C0G C0G
0.015µF p114
0.018µF p114
0.022µF
p114
0.027µF
p114
0.030µF
p114
0.036µF
p114
0.044µF
p114
0.054µF
p114
32
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Capacitance Table
KRM Series High Dielectric Constant Type
p00
← Part Number List
EIA: X7R X7S
2.2×1.25
L×W (mm)
T max. (mm)
X6S X5R
1.9
Rated Voltage (Vdc) 25
16
3.5×1.7
3.6× 3.7×
1.7 1.85
2.9
2.9 2.9
2.0
2.0
25
25 100 50
35
25
6.1×5.3
3.0
50 100 1000 630 450 250 100 63
3.9
50
35
25 100 63
50
35
25
Cap. / TC Code X5R X5R X7S X6S X5R X5R X7R X7R X6S X6S X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R
68000pF
p115
0.10µF
p115
0.15µF
p115
0.22µF
p115
0.33µF
p115
0.47µF
p115
0.68µF
p115
1.0µF
p115
p115
1.5µF
2.2µF
p115 p115
4.7µF
p115
p115 p115 p115
6.8µF
p115
10µF p115 p115 p115 p115
p115
p115 p115
p115 p115
15µF
p115 p115 p115
p115 p115
17µF
p115 p115
22µF
p115
p115 p115
33µF
p115
47µF
68µF
100µF
Continued to the following table.
6.1×5.3
L×W (mm)
5.0
T max. (mm) 3.9
6.7
Rated Voltage (Vdc) 25 1000 630 450 250 100 50
35
25 100 63
50
35
25
Cap. / TC Code X7S X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7S
68000pF
0.10µF
0.15µF
p115
0.22µF
p115
0.33µF
p115
0.47µF
p115
0.68µF
p115
1.0µF
p115
1.5µF
p115
2.2µF
p115
4.7µF
6.8µF
10µF
p115
15µF
p115
17µF
22µF
33µF
47µF p115
68µF
100µF
p115 p115
p115 p115
p115 p115 p115
p115 p115
p115 p115
p115
p115
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
Capacitance Table
KR3 Series High Dielectric Constant Type
p00
← Part Number List
EIA: X7T
6.1×5.3
L×W (mm)
3.0
T max. (mm)
5.0
3.9
6.7
Rated Voltage (Vdc) 630 450 250 630 450 450 450 250 630 450 250
Cap. / TC Code X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T
0.10µF p118
0.15µF p118
0.22µF
p118
p118
0.27µF
p118
0.33µF
p118
0.47µF
p118 p118
p118
0.56µF
p118
0.68µF
p118
p118
p118
1.0µF
p118 p118
1.2µF
p118
1.5µF
p118
2.2µF
p118
GMA Series High Dielectric Constant Type
p00
← Part Number List
L×W (mm)
JIS:
R
B
EIA: X7R X5R
0.38×0.38
0.5×0.5
0.35
0.4
T max. (mm)
Rated Voltage (Vdc)
Cap. / TC Code X7R
10
R
100
B
25
X7R X7R
100pF
p121
150pF
p121
220pF
p121
330pF
p121
470pF
p121
680pF
p121
0.8×0.8
0.6
10
B
X7R
R
6.3
B
X5R
100
B
25
X7R X7R
10
B
X7R
R
6.3
B
X5R
B
1000pF p121 p121 p121 p121
1500pF p121 p121 p121
p121 p121
p121
2200pF
p121 p121
p121
3300pF
p121 p121
p121
4700pF
p121 p121
1800pF p121 p121 p121
6800pF
p121
p121 p121 p121
p121
10000pF p121 p121
p121 p121 p121
p121 p121
15000pF
p121 p121 p121
p121 p121
22000pF
p121 p121 p121
p121 p121
33000pF
p121 p121 p121
47000pF
p121 p121 p121
68000pF
0.10µF
0.47µF
p121 p121 p121
p121 p121
p121 p121 p121
p121 p121
34
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
Capacitance Table
GMD Series High Dielectric Constant Type
p00
← Part Number List
JIS:
R
B
0.6×0.3
L×W (mm)
Cap. / TC Code X7R
1.0×0.5
0.33
T max. (mm)
Rated Voltage (Vdc)
EIA: X7R X5R
25
R
0.55
16
B
X7R
R
10
B
X7R
R
6.3
B
X5R
50
B
X7R
R
25
B
X7R
R
16
B
X7R
R
10
B
X5R
B
100pF p123 p123 p123
120pF p123 p123 p123
150pF p123 p123 p123
180pF p123 p123 p123
220pF p123 p123 p123
p123 p123 p124
270pF p123 p123 p123
p123 p124 p124
330pF p123 p123 p123
p123 p124 p124
390pF p123 p123 p123
p123 p124 p124
470pF p123 p123 p123
p123 p124 p124
560pF p123 p123 p123
p123 p124 p124
680pF p123 p123 p123
p123 p124 p124
820pF p123 p123 p123
p123 p124 p124
1000pF p123 p123 p123
p123 p124 p124
1200pF p123 p123 p123
p123 p124 p124
1500pF p123 p123 p123
p123 p124 p124
1800pF
p123 p123 p123
p123 p124 p124
2200pF
p123 p123 p123
p123 p124 p124
2700pF
p123 p123 p123
p123 p124 p124
3300pF
p123 p123 p123
p123 p124 p124
3900pF
p123 p123 p123
p123 p124 p124
4700pF
p123 p123 p123
p123 p124 p124
5600pF
p123 p123 p123
p124 p124 p124
6800pF
p123 p123 p123
p124 p124 p124
8200pF
p123 p123 p123
p124 p124 p124
10000pF
p123 p123 p123
p124 p124 p124
12000pF
p124 p124 p124
15000pF
p124 p124 p124
18000pF
p124 p124 p124
22000pF
p124 p124 p124
27000pF
p124 p124 p124
33000pF
p124 p124 p124
39000pF
p124 p124 p124
47000pF
p124 p124 p124
56000pF
p123 p123
p124 p124 p124
68000pF
p123 p123
p124 p124 p124
82000pF
p123 p123
p124 p124 p124
0.10µF
p123 p123
p124 p124 p124
0.12µF
p124 p124
0.15µF
p124 p124
0.18µF
p124 p124
0.22µF
p124 p124
0.27µF
p124 p124
0.33µF
p124 p124
0.39µF
p124 p124
0.47µF
p124 p124
35
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
Specifications and Test Methods, Package, Chart of Characteristic Data,
please refer to the search web page.
Search Capacitors
https://www.murata.com/en-global/products/capacitor
Links are provided to the product detail pages on the web, and are shown below in the product number
table from the PDF version of the catalog which is available
on the web.
C02E.pdf
Note F*#1#0#"02',%,"
H$-012-0%#A-.#02',%A02',%A1-*"#0',%A+-3,2',%,"&,"*',%J',2&'1!2*-%2-.0#4#,21+-)',%,"G-0 30,',%A#2!@
F&'1!2*-%&1-,*727.'!*1.#!'$'!2'-,1@#$-0#A.*#1#..0-4#-30.0-"3!21.#!'$'!2'-,1-020,1!22..0-4*1#2$-0.0-"3!21.#!'$'!2'-,1 #$-0#-0"#0',%@
Mar.##,2020
±0.5pF GRM0115C1E5R8DE01#
5.9pF
±0.5pF GRM0115C1E5R9DE01#
0.60pF
±0.1pF GRM0115C1ER60BE11#
6.0pF
±0.5pF GRM0115C1E6R0DE01#
0.70pF
±0.1pF GRM0115C1ER70BE11#
6.1pF
±0.5pF GRM0115C1E6R1DE01#
0.80pF
±0.1pF GRM0115C1ER80BE11#
6.2pF
±0.5pF GRM0115C1E6R2DE01#
0.90pF
±0.1pF GRM0115C1ER90BE11#
6.3pF
±0.5pF GRM0115C1E6R3DE01#
1.0pF
±0.25pF GRM0115C1E1R0CE11#
6.4pF
±0.5pF GRM0115C1E6R4DE01#
1.1pF
±0.25pF GRM0115C1E1R1CE11#
6.5pF
±0.5pF GRM0115C1E6R5DE01#
1.2pF
±0.25pF GRM0115C1E1R2CE11#
6.6pF
±0.5pF GRM0115C1E6R6DE01#
1.3pF
±0.25pF GRM0115C1E1R3CE11#
6.7pF
±0.5pF GRM0115C1E6R7DE01#
1.4pF
±0.25pF GRM0115C1E1R4CE11#
6.8pF
±0.5pF GRM0115C1E6R8DE01#
1.5pF
±0.25pF GRM0115C1E1R5CE11#
6.9pF
±0.5pF GRM0115C1E6R9DE01#
1.6pF
±0.25pF GRM0115C1E1R6CE11#
7.0pF
±0.5pF GRM0115C1E7R0DE01#
1.7pF
±0.25pF GRM0115C1E1R7CE11#
7.1pF
±0.5pF GRM0115C1E7R1DE01#
1.8pF
±0.25pF GRM0115C1E1R8CE11#
7.2pF
±0.5pF GRM0115C1E7R2DE01#
1.9pF
±0.25pF GRM0115C1E1R9CE11#
7.3pF
±0.5pF GRM0115C1E7R3DE01#
2.0pF
±0.25pF GRM0115C1E2R0CE11#
7.4pF
±0.5pF GRM0115C1E7R4DE01#
2.1pF
±0.25pF GRM0115C1E2R1CE11#
7.5pF
±0.5pF GRM0115C1E7R5DE01#
2.2pF
±0.25pF GRM0115C1E2R2CE11#
7.6pF
±0.5pF GRM0115C1E7R6DE01#
2.3pF
±0.25pF GRM0115C1E2R3CE11#
7.7pF
±0.5pF GRM0115C1E7R7DE01#
2.4pF
±0.25pF GRM0115C1E2R4CE01#
7.8pF
±0.5pF GRM0115C1E7R8DE01#
2.5pF
±0.25pF GRM0115C1E2R5CE01#
7.9pF
±0.5pF GRM0115C1E7R9DE01#
2.6pF
±0.25pF GRM0115C1E2R6CE01#
8.0pF
±0.5pF GRM0115C1E8R0DE01#
2.7pF
±0.25pF GRM0115C1E2R7CE01#
8.1pF
±0.5pF GRM0115C1E8R1DE01#
2.8pF
±0.25pF GRM0115C1E2R8CE01#
8.2pF
±0.5pF GRM0115C1E8R2DE01#
2.9pF
±0.25pF GRM0115C1E2R9CE01#
8.3pF
±0.5pF GRM0115C1E8R3DE01#
3.0pF
±0.25pF GRM0115C1E3R0CE01#
8.4pF
±0.5pF GRM0115C1E8R4DE01#
3.1pF
±0.25pF GRM0115C1E3R1CE01#
8.5pF
±0.5pF GRM0115C1E8R5DE01#
3.2pF
±0.25pF GRM0115C1E3R2CE01#
8.6pF
±0.5pF GRM0115C1E8R6DE01#
3.3pF
±0.25pF GRM0115C1E3R3CE01#
8.7pF
±0.5pF GRM0115C1E8R7DE01#
3.4pF
±0.25pF GRM0115C1E3R4CE01#
8.8pF
±0.5pF GRM0115C1E8R8DE01#
3.5pF
±0.25pF GRM0115C1E3R5CE01#
8.9pF
±0.5pF GRM0115C1E8R9DE01#
3.6pF
±0.25pF GRM0115C1E3R6CE01#
9.0pF
±0.5pF GRM0115C1E9R0DE01#
3.7pF
±0.25pF GRM0115C1E3R7CE01#
9.1pF
±0.5pF GRM0115C1E9R1DE01#
3.8pF
±0.25pF GRM0115C1E3R8CE01#
9.2pF
±0.5pF GRM0115C1E9R2DE01#
3.9pF
±0.25pF GRM0115C1E3R9CE01#
9.3pF
±0.5pF GRM0115C1E9R3DE01#
4.0pF
±0.25pF GRM0115C1E4R0CE01#
9.4pF
±0.5pF GRM0115C1E9R4DE01#
4.1pF
±0.25pF GRM0115C1E4R1CE01#
9.5pF
±0.5pF GRM0115C1E9R5DE01#
4.2pF
±0.25pF GRM0115C1E4R2CE01#
9.6pF
±0.5pF GRM0115C1E9R6DE01#
4.3pF
±0.25pF GRM0115C1E4R3CE01#
9.7pF
±0.5pF GRM0115C1E9R7DE01#
4.4pF
±0.25pF GRM0115C1E4R4CE01#
9.8pF
±0.5pF GRM0115C1E9R8DE01#
4.5pF
±0.25pF GRM0115C1E4R5CE01#
9.9pF
±0.5pF GRM0115C1E9R9DE01#
4.6pF
±0.25pF GRM0115C1E4R6CE01#
10pF
±5%
GRM0115C1E100JE01#
4.7pF
±0.25pF GRM0115C1E4R7CE01#
11pF
±5%
GRM0115C1E110JE01#
4.8pF
±0.25pF GRM0115C1E4R8CE01#
12pF
±5%
GRM0115C1E120JE01#
4.9pF
±0.25pF GRM0115C1E4R9CE01#
13pF
±5%
GRM0115C1E130JE01#
5.0pF
±0.25pF GRM0115C1E5R0CE01#
15pF
±5%
GRM0115C1E150JE01#
5.1pF
±0.5pF GRM0115C1E5R1DE01#
16pF
±5%
GRM0115C1E160JE01#
5.2pF
±0.5pF GRM0115C1E5R2DE01#
18pF
±5%
GRM0115C1E180JE01#
5.3pF
±0.5pF GRM0115C1E5R3DE01#
20pF
±5%
GRM0115C1E200JE01#
Part number # indicates the package specification code.
5.8pF
±0.1pF GRM0115C1ER50BE11#
±0.1pF GRM0115C1ER40BE11#
0.50pF
0.40pF
Status and Features Icons
The status and features of products can be checked at
once. When
is clicked, a description of each icon will
be displayed
±0.5pF GRM0115C1E5R7DE01#
Stock Check (Where to buy)
±0.5pF GRM0115C1E5R6DE01#
5.7pF
Some products can request free samples.
Reference inventory information from agents and
web-based companies.
5.6pF
±0.1pF GRM0115C1ER30BE11#
±0.5pF GRM0115C1E5R5DE01#
±0.1pF GRM0115C1ER20BE11#
0.30pF
5.5pF
0.20pF
Part Number
Tol.
±0.5pF GRM0115C1E5R4DE01#
Cap.
5.4pF
Data Sheet
The product details page can be output in PDF.
How to read part numbers
Describes the meaning of the part number
C0G
Series Information
Part Number
This links to the introduction page of each series.
C0G
Tol.
0.138mm 25Vdc
Cap.
Rated
TC
Voltage Code
0.138mm 25Vdc
Rated
TC
Voltage Code
T
max.
!
T
max.
0.25×0.125mm
GRM Series Temperature Compensating Type Part Number List
38
Detailed Specifications Sheet
• Rated value
• Specifications and Test Methods
• Package
• Caution, Notice
(Storage, Soldering and Mounting, ....etc.)
Characteristics Data
The following characteristics data of the
main products can be acquired.
• SPICE Netlist (mod type)
• S parameter (S2P type)
• Reliability Test Data *Typical data
• Shape (Dimensions)
• Rated Values
• Specification by Packaging Code/
Minimum Order Quantity
• Weight (1 pc/ø180mm reel)
Chart of Characteristic Data
The main products published characteristic data.
• Frequency characteristics (ESR, Impedance)
• DC bias characteristics
• AC voltage characteristics
• Capacitance - temperature characteristics
• Calorific property by ripple current
36
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRM
Mar.13,2020
Chip Multilayer Ceramic Capacitors for General Purpose
GRM Series
GR3
WEB
GR4
GRJ
This is Murata primary products renowned for both small size and large
capacitance value with latest advanced technology.
Features
“Thin Layer Technology”
Ni/Sn Plated Layer
for thinner layers
“Fine Particle Technology”
for finer particles
“High Precision Lamination Technology”
for more accuracy
01005 size
GQM
Ceramic
GJM
Achieves large-capacity and small size in a multilayer structure.
Internal Electrodes
Ceramic
automatic
lead pencil
(0.5mm)
Internal Electrodes
Foundation Electrode Layer
ceramic thickness: 1µm
Internal electrode thickness: 0.7µm
GA3
GB
GA2
1
2µm
Sn plating is applied to the external electrodes; excellent solderability.
3
High reliability with no polarity.
LLL
2
GA3
GF
ceramic thickness: 0.5µm
Internal electrode thickness: 0.4µm
GA3
GD
0.5µm
Ceramic Capacitors Tantalum Capacitor Aluminum Electrolytic Capacitor Conductive Polymer Capacitor
LLA
Price
LLM
Comparison between
Impedance Frequency
Characteristics
Capacitance temperature
characteristics
Polarity
No
Yes
Yes
LLR
DC breakdown voltage
Yes
Pulse response
NFM
Allowable ripple current
Reliability
: Particularly excellent
: Excellent
: Inferior
Capacitance
Main Applications
g
e
2.5Vdc to 3150Vdc
T
0.10pF to 330µF
1. Rated voltage 100V Max.
High Dielectric Constant Type · · · For decoupling and smoothing circuits
Temperature Compensating Type · · · For tuning circuits, oscillating circuits,
and high frequency filter circuits
2. Rated voltage 200V min.
High Dielectric Constant Type · · · For clamp snubber circuits and smoothing circuits
Temperature Compensating Type · · · Power supply damper snubber
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
L
W
GMA
e
GMD
Rated Voltage
0.25×0.125mm to 5.7×5.0mm
!Caution
/Notice
Size (mm)
KR3
Specifications
KRM
DC bias characteristics
37
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
5.8pF
±0.5pF GRM0115C1E5R8DE01#
0.50pF
±0.1pF GRM0115C1ER50BE11#
5.9pF
±0.5pF GRM0115C1E5R9DE01#
0.60pF
±0.1pF GRM0115C1ER60BE11#
6.0pF
±0.5pF GRM0115C1E6R0DE01#
0.70pF
±0.1pF GRM0115C1ER70BE11#
6.1pF
±0.5pF GRM0115C1E6R1DE01#
0.80pF
±0.1pF GRM0115C1ER80BE11#
6.2pF
±0.5pF GRM0115C1E6R2DE01#
0.90pF
±0.1pF GRM0115C1ER90BE11#
6.3pF
±0.5pF GRM0115C1E6R3DE01#
1.0pF
±0.25pF GRM0115C1E1R0CE11#
6.4pF
±0.5pF GRM0115C1E6R4DE01#
1.1pF
±0.25pF GRM0115C1E1R1CE11#
6.5pF
±0.5pF GRM0115C1E6R5DE01#
1.2pF
±0.25pF GRM0115C1E1R2CE11#
6.6pF
±0.5pF GRM0115C1E6R6DE01#
1.3pF
±0.25pF GRM0115C1E1R3CE11#
6.7pF
±0.5pF GRM0115C1E6R7DE01#
1.4pF
±0.25pF GRM0115C1E1R4CE11#
6.8pF
±0.5pF GRM0115C1E6R8DE01#
1.5pF
±0.25pF GRM0115C1E1R5CE11#
6.9pF
±0.5pF GRM0115C1E6R9DE01#
1.6pF
±0.25pF GRM0115C1E1R6CE11#
7.0pF
±0.5pF GRM0115C1E7R0DE01#
1.7pF
±0.25pF GRM0115C1E1R7CE11#
7.1pF
±0.5pF GRM0115C1E7R1DE01#
1.8pF
±0.25pF GRM0115C1E1R8CE11#
7.2pF
±0.5pF GRM0115C1E7R2DE01#
1.9pF
±0.25pF GRM0115C1E1R9CE11#
7.3pF
±0.5pF GRM0115C1E7R3DE01#
2.0pF
±0.25pF GRM0115C1E2R0CE11#
7.4pF
±0.5pF GRM0115C1E7R4DE01#
2.1pF
±0.25pF GRM0115C1E2R1CE11#
7.5pF
±0.5pF GRM0115C1E7R5DE01#
2.2pF
±0.25pF GRM0115C1E2R2CE11#
7.6pF
±0.5pF GRM0115C1E7R6DE01#
2.3pF
±0.25pF GRM0115C1E2R3CE11#
7.7pF
±0.5pF GRM0115C1E7R7DE01#
2.4pF
±0.25pF GRM0115C1E2R4CE01#
7.8pF
±0.5pF GRM0115C1E7R8DE01#
2.5pF
±0.25pF GRM0115C1E2R5CE01#
7.9pF
±0.5pF GRM0115C1E7R9DE01#
2.6pF
±0.25pF GRM0115C1E2R6CE01#
8.0pF
±0.5pF GRM0115C1E8R0DE01#
2.7pF
±0.25pF GRM0115C1E2R7CE01#
8.1pF
±0.5pF GRM0115C1E8R1DE01#
2.8pF
±0.25pF GRM0115C1E2R8CE01#
8.2pF
±0.5pF GRM0115C1E8R2DE01#
2.9pF
±0.25pF GRM0115C1E2R9CE01#
8.3pF
±0.5pF GRM0115C1E8R3DE01#
3.0pF
±0.25pF GRM0115C1E3R0CE01#
8.4pF
±0.5pF GRM0115C1E8R4DE01#
3.1pF
±0.25pF GRM0115C1E3R1CE01#
8.5pF
±0.5pF GRM0115C1E8R5DE01#
3.2pF
±0.25pF GRM0115C1E3R2CE01#
8.6pF
±0.5pF GRM0115C1E8R6DE01#
3.3pF
±0.25pF GRM0115C1E3R3CE01#
8.7pF
±0.5pF GRM0115C1E8R7DE01#
3.4pF
±0.25pF GRM0115C1E3R4CE01#
8.8pF
±0.5pF GRM0115C1E8R8DE01#
3.5pF
±0.25pF GRM0115C1E3R5CE01#
8.9pF
±0.5pF GRM0115C1E8R9DE01#
3.6pF
±0.25pF GRM0115C1E3R6CE01#
9.0pF
±0.5pF GRM0115C1E9R0DE01#
3.7pF
±0.25pF GRM0115C1E3R7CE01#
9.1pF
±0.5pF GRM0115C1E9R1DE01#
3.8pF
±0.25pF GRM0115C1E3R8CE01#
9.2pF
±0.5pF GRM0115C1E9R2DE01#
3.9pF
±0.25pF GRM0115C1E3R9CE01#
9.3pF
±0.5pF GRM0115C1E9R3DE01#
4.0pF
±0.25pF GRM0115C1E4R0CE01#
9.4pF
±0.5pF GRM0115C1E9R4DE01#
4.1pF
±0.25pF GRM0115C1E4R1CE01#
9.5pF
±0.5pF GRM0115C1E9R5DE01#
4.2pF
±0.25pF GRM0115C1E4R2CE01#
9.6pF
±0.5pF GRM0115C1E9R6DE01#
4.3pF
±0.25pF GRM0115C1E4R3CE01#
9.7pF
±0.5pF GRM0115C1E9R7DE01#
4.4pF
±0.25pF GRM0115C1E4R4CE01#
9.8pF
±0.5pF GRM0115C1E9R8DE01#
4.5pF
±0.25pF GRM0115C1E4R5CE01#
9.9pF
±0.5pF GRM0115C1E9R9DE01#
4.6pF
±0.25pF GRM0115C1E4R6CE01#
10pF
±5%
GRM0115C1E100JE01#
4.7pF
±0.25pF GRM0115C1E4R7CE01#
11pF
±5%
GRM0115C1E110JE01#
4.8pF
±0.25pF GRM0115C1E4R8CE01#
12pF
±5%
GRM0115C1E120JE01#
4.9pF
±0.25pF GRM0115C1E4R9CE01#
13pF
±5%
GRM0115C1E130JE01#
5.0pF
±0.25pF GRM0115C1E5R0CE01#
15pF
±5%
GRM0115C1E150JE01#
5.1pF
±0.5pF GRM0115C1E5R1DE01#
16pF
±5%
GRM0115C1E160JE01#
5.2pF
±0.5pF GRM0115C1E5R2DE01#
18pF
±5%
GRM0115C1E180JE01#
5.3pF
±0.5pF GRM0115C1E5R3DE01#
20pF
±5%
GRM0115C1E200JE01#
Part number # indicates the package specification code.
GR3
GRJ
±0.1pF GRM0115C1ER40BE11#
GR4
±0.5pF GRM0115C1E5R7DE01#
0.40pF
GJM
5.7pF
GQM
±0.1pF GRM0115C1ER30BE11#
GA2
±0.5pF GRM0115C1E5R6DE01#
0.30pF
GA3
GB
5.6pF
GA3
GD
±0.5pF GRM0115C1E5R5DE01#
±0.1pF GRM0115C1ER20BE11#
GA3
GF
5.5pF
0.20pF
LLL
±0.5pF GRM0115C1E5R4DE01#
LLA
5.4pF
LLM
C0G
LLR
0.138mm 25Vdc
NFM
Part Number
KRM
C0G
Tol.
Part Number
KR3
0.138mm 25Vdc
Cap.
Tol.
GMA
Rated
TC
Voltage Code
Cap.
GMD
T
max.
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
0.25×0.125mm
GRM
GRM Series Temperature Compensating Type Part Number List
38
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
GRM Series Temperature Compensating Type Part Number List
±5%
GRM0115C1C470JE01#
GRM0115C1E240JE01#
51pF
±5%
GRM0115C1C510JE01#
GRM0115C1E270JE01#
56pF
±5%
GRM0115C1C560JE01#
±5%
GRM0115C1E300JE01#
62pF
±5%
GRM0115C1C620JE01#
33pF
±5%
GRM0115C1E330JE01#
68pF
±5%
GRM0115C1C680JE01#
36pF
±5%
GRM0115C1E360JE01#
75pF
±5%
GRM0115C1C750JE01#
39pF
±5%
GRM0115C1E390JE01#
82pF
±5%
GRM0115C1C820JE01#
43pF
±5%
GRM0115C1E430JE01#
91pF
±5%
GRM0115C1C910JE01#
47pF
±5%
GRM0115C1E470JE01#
100pF
±5%
GRM0115C1C101JE01#
51pF
±5%
GRM0115C1E510JE01#
56pF
±5%
GRM0115C1E560JE01#
62pF
±5%
GRM0115C1E620JE01#
68pF
±5%
GRM0115C1E680JE01#
75pF
±5%
GRM0115C1E750JE01#
Cap.
Tol.
82pF
±5%
GRM0115C1E820JE01#
0.20pF
±0.1pF GRM0225C1HR20BA03#
91pF
±5%
GRM0115C1E910JE01#
0.30pF
±0.1pF GRM0225C1HR30BA03#
100pF
±5%
GRM0115C1E101JE01#
0.40pF
±0.1pF GRM0225C1HR40BA03#
0.20pF
±0.1pF GRM0115C1CR20BE11#
0.50pF
±0.1pF GRM0225C1HR50BA03#
0.30pF
±0.1pF GRM0115C1CR30BE11#
0.60pF
±0.1pF GRM0225C1HR60BA03#
0.40pF
±0.1pF GRM0115C1CR40BE11#
0.70pF
±0.1pF GRM0225C1HR70BA03#
0.50pF
±0.1pF GRM0115C1CR50BE11#
0.80pF
±0.1pF GRM0225C1HR80BA03#
0.60pF
±0.1pF GRM0115C1CR60BE11#
0.90pF
±0.1pF GRM0225C1HR90BA03#
0.70pF
±0.1pF GRM0115C1CR70BE11#
1.0pF
±0.25pF GRM0225C1H1R0CA03#
0.80pF
±0.1pF GRM0115C1CR80BE11#
1.1pF
±0.25pF GRM0225C1H1R1CA03#
0.90pF
±0.1pF GRM0115C1CR90BE11#
1.2pF
±0.25pF GRM0225C1H1R2CA03#
1.0pF
±0.25pF GRM0115C1C1R0CE11#
1.3pF
±0.25pF GRM0225C1H1R3CA03#
1.1pF
±0.25pF GRM0115C1C1R1CE11#
1.4pF
±0.25pF GRM0225C1H1R4CA03#
1.2pF
±0.25pF GRM0115C1C1R2CE11#
1.5pF
±0.25pF GRM0225C1H1R5CA03#
1.3pF
±0.25pF GRM0115C1C1R3CE11#
1.6pF
±0.25pF GRM0225C1H1R6CA03#
1.4pF
±0.25pF GRM0115C1C1R4CE11#
1.7pF
±0.25pF GRM0225C1H1R7CA03#
1.5pF
±0.25pF GRM0115C1C1R5CE11#
1.8pF
±0.25pF GRM0225C1H1R8CA03#
1.6pF
±0.25pF GRM0115C1C1R6CE11#
1.9pF
±0.25pF GRM0225C1H1R9CA03#
1.7pF
±0.25pF GRM0115C1C1R7CE11#
2.0pF
±0.25pF GRM0225C1H2R0CA03#
1.8pF
±0.25pF GRM0115C1C1R8CE11#
2.1pF
±0.25pF GRM0225C1H2R1CA03#
1.9pF
±0.25pF GRM0115C1C1R9CE11#
2.2pF
±0.25pF GRM0225C1H2R2CA03#
2.0pF
±0.25pF GRM0115C1C2R0CE11#
2.3pF
±0.25pF GRM0225C1H2R3CA03#
2.1pF
±0.25pF GRM0115C1C2R1CE11#
2.4pF
±0.25pF GRM0225C1H2R4CA03#
2.2pF
±0.25pF GRM0115C1C2R2CE11#
2.5pF
±0.25pF GRM0225C1H2R5CA03#
2.3pF
±0.25pF GRM0115C1C2R3CE11#
GQM
Rated
TC
Voltage Code
0.22mm 50Vdc
C0G
Part Number
2.6pF
±0.25pF GRM0225C1H2R6CA03#
11pF
±5%
GRM0115C1C110JE01#
2.7pF
±0.25pF GRM0225C1H2R7CA03#
12pF
±5%
GRM0115C1C120JE01#
2.8pF
±0.25pF GRM0225C1H2R8CA03#
13pF
±5%
GRM0115C1C130JE01#
2.9pF
±0.25pF GRM0225C1H2R9CA03#
15pF
±5%
GRM0115C1C150JE01#
3.0pF
±0.25pF GRM0225C1H3R0CA03#
16pF
±5%
GRM0115C1C160JE01#
3.1pF
±0.25pF GRM0225C1H3R1CA03#
18pF
±5%
GRM0115C1C180JE01#
3.2pF
±0.25pF GRM0225C1H3R2CA03#
20pF
±5%
GRM0115C1C200JE01#
3.3pF
±0.25pF GRM0225C1H3R3CA03#
22pF
±5%
GRM0115C1C220JE01#
3.4pF
±0.25pF GRM0225C1H3R4CA03#
24pF
±5%
GRM0115C1C240JE01#
3.5pF
±0.25pF GRM0225C1H3R5CA03#
27pF
±5%
GRM0115C1C270JE01#
3.6pF
±0.25pF GRM0225C1H3R6CA03#
30pF
±5%
GRM0115C1C300JE01#
3.7pF
±0.25pF GRM0225C1H3R7CA03#
33pF
±5%
GRM0115C1C330JE01#
3.8pF
±0.25pF GRM0225C1H3R8CA03#
36pF
±5%
GRM0115C1C360JE01#
3.9pF
±0.25pF GRM0225C1H3R9CA03#
39pF
±5%
GRM0115C1C390JE01#
4.0pF
±0.25pF GRM0225C1H4R0CA03#
43pF
±5%
GRM0115C1C430JE01#
4.1pF
±0.25pF GRM0225C1H4R1CA03#
Part number # indicates the package specification code.
GA2
T
max.
GA3
GB
0.4×0.2mm
GA3
GD
30pF
GA3
GF
±5%
LLL
±5%
27pF
LLA
24pF
C0G
GRJ
47pF
0.138mm 16Vdc
LLM
GRM0115C1E220JE01#
Part Number
GR4
Tol.
GJM
Cap.
LLR
±5%
Rated
TC
Voltage Code
NFM
22pF
T
max.
KRM
C0G
Part Number
KR3
16Vdc
C0G
Tol.
GMA
0.138mm 25Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 0.25×0.125mm)
39
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
GRM Series Temperature Compensating Type Part Number List
±0.5pF GRM0225C1H9R9DA03#
4.6pF
±0.25pF GRM0225C1H4R6CA03#
10pF
±5%
GRM0225C1H100JA03#
4.7pF
±0.25pF GRM0225C1H4R7CA03#
11pF
±5%
GRM0225C1H110JA03#
4.8pF
±0.25pF GRM0225C1H4R8CA03#
12pF
±5%
GRM0225C1H120JA03#
4.9pF
±0.25pF GRM0225C1H4R9CA03#
13pF
±5%
GRM0225C1H130JA03#
5.0pF
±0.25pF GRM0225C1H5R0CA03#
15pF
±5%
GRM0225C1H150JA03#
5.1pF
±0.5pF GRM0225C1H5R1DA03#
16pF
±5%
GRM0225C1H160JA03#
5.2pF
±0.5pF GRM0225C1H5R2DA03#
18pF
±5%
GRM0225C1H180JA02#
5.3pF
±0.5pF GRM0225C1H5R3DA03#
20pF
±5%
GRM0225C1H200JA02#
5.4pF
±0.5pF GRM0225C1H5R4DA03#
22pF
±5%
GRM0225C1H220JA02#
5.5pF
±0.5pF GRM0225C1H5R5DA03#
24pF
±5%
GRM0225C1H240JA02#
5.6pF
±0.5pF GRM0225C1H5R6DA03#
27pF
±5%
GRM0225C1H270JA02#
5.7pF
±0.5pF GRM0225C1H5R7DA03#
30pF
±5%
GRM0225C1H300JA02#
5.8pF
±0.5pF GRM0225C1H5R8DA03#
33pF
±5%
GRM0225C1H330JA02#
5.9pF
±0.5pF GRM0225C1H5R9DA03#
36pF
±5%
GRM0225C1H360JA02#
6.0pF
±0.5pF GRM0225C1H6R0DA03#
39pF
±5%
GRM0225C1H390JA02#
6.1pF
±0.5pF GRM0225C1H6R1DA03#
43pF
±5%
GRM0225C1H430JA02#
6.2pF
±0.5pF GRM0225C1H6R2DA03#
47pF
±5%
GRM0225C1H470JA02#
6.3pF
±0.5pF GRM0225C1H6R3DA03#
51pF
±5%
GRM0225C1H510JA02#
6.4pF
±0.5pF GRM0225C1H6R4DA03#
56pF
±5%
GRM0225C1H560JA02#
6.5pF
±0.5pF GRM0225C1H6R5DA03#
62pF
±5%
GRM0225C1H620JA02#
6.6pF
±0.5pF GRM0225C1H6R6DA03#
68pF
±5%
GRM0225C1H680JA02#
6.7pF
±0.5pF GRM0225C1H6R7DA03#
75pF
±5%
GRM0225C1H750JA02#
6.8pF
±0.5pF GRM0225C1H6R8DA03#
82pF
±5%
GRM0225C1H820JA02#
6.9pF
±0.5pF GRM0225C1H6R9DA03#
91pF
±5%
GRM0225C1H910JA02#
7.0pF
±0.5pF GRM0225C1H7R0DA03#
100pF
±5%
GRM0225C1H101JA02#
7.1pF
±0.5pF GRM0225C1H7R1DA03#
7.2pF
7.3pF
0.20pF
±0.1pF GRM0224C1HR20BA03#
±0.5pF GRM0225C1H7R2DA03#
0.30pF
±0.1pF GRM0224C1HR30BA03#
±0.5pF GRM0225C1H7R3DA03#
0.40pF
±0.1pF GRM0224C1HR40BA03#
7.4pF
±0.5pF GRM0225C1H7R4DA03#
0.50pF
±0.1pF GRM0224C1HR50BA03#
7.5pF
±0.5pF GRM0225C1H7R5DA03#
0.60pF
±0.1pF GRM0224C1HR60BA03#
7.6pF
±0.5pF GRM0225C1H7R6DA03#
0.70pF
±0.1pF GRM0224C1HR70BA03#
7.7pF
±0.5pF GRM0225C1H7R7DA03#
0.80pF
±0.1pF GRM0224C1HR80BA03#
7.8pF
±0.5pF GRM0225C1H7R8DA03#
0.90pF
±0.1pF GRM0224C1HR90BA03#
7.9pF
±0.5pF GRM0225C1H7R9DA03#
1.0pF
±0.25pF GRM0224C1H1R0CA03#
8.0pF
±0.5pF GRM0225C1H8R0DA03#
1.1pF
±0.25pF GRM0224C1H1R1CA03#
8.1pF
±0.5pF GRM0225C1H8R1DA03#
1.2pF
±0.25pF GRM0224C1H1R2CA03#
8.2pF
±0.5pF GRM0225C1H8R2DA03#
1.3pF
±0.25pF GRM0224C1H1R3CA03#
8.3pF
±0.5pF GRM0225C1H8R3DA03#
1.4pF
±0.25pF GRM0224C1H1R4CA03#
8.4pF
±0.5pF GRM0225C1H8R4DA03#
1.5pF
±0.25pF GRM0224C1H1R5CA03#
8.5pF
±0.5pF GRM0225C1H8R5DA03#
1.6pF
±0.25pF GRM0224C1H1R6CA03#
8.6pF
±0.5pF GRM0225C1H8R6DA03#
1.7pF
±0.25pF GRM0224C1H1R7CA03#
8.7pF
±0.5pF GRM0225C1H8R7DA03#
1.8pF
±0.25pF GRM0224C1H1R8CA03#
8.8pF
±0.5pF GRM0225C1H8R8DA03#
1.9pF
±0.25pF GRM0224C1H1R9CA03#
8.9pF
±0.5pF GRM0225C1H8R9DA03#
2.0pF
±0.25pF GRM0224C1H2R0CA03#
9.0pF
±0.5pF GRM0225C1H9R0DA03#
2.1pF
±0.25pF GRM0223C1H2R1CA03#
9.1pF
±0.5pF GRM0225C1H9R1DA03#
2.2pF
±0.25pF GRM0223C1H2R2CA03#
9.2pF
±0.5pF GRM0225C1H9R2DA03#
2.3pF
±0.25pF GRM0223C1H2R3CA03#
9.3pF
±0.5pF GRM0225C1H9R3DA03#
2.4pF
±0.25pF GRM0223C1H2R4CA03#
9.4pF
±0.5pF GRM0225C1H9R4DA03#
2.5pF
±0.25pF GRM0223C1H2R5CA03#
9.5pF
±0.5pF GRM0225C1H9R5DA03#
2.6pF
±0.25pF GRM0223C1H2R6CA03#
CK
CJ
Part number # indicates the package specification code.
GRJ
9.9pF
GR4
±0.25pF GRM0225C1H4R5CA03#
GJM
±0.5pF GRM0225C1H9R8DA03#
4.5pF
GQM
±0.5pF GRM0225C1H9R7DA03#
9.8pF
GA2
9.7pF
±0.25pF GRM0225C1H4R4CA03#
GA3
GB
±0.25pF GRM0225C1H4R3CA03#
GA3
GD
±0.5pF GRM0225C1H9R6DA03#
C0G
GA3
GF
9.6pF
0.22mm 50Vdc
LLL
Part Number
LLA
4.4pF
Tol.
LLM
4.3pF
Cap.
LLR
±0.25pF GRM0225C1H4R2CA03#
Rated
TC
Voltage Code
NFM
4.2pF
T
max.
KRM
Part Number
KR3
C0G
Tol.
GMA
0.22mm 50Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 0.4×0.2mm)
40
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
GRM Series Temperature Compensating Type Part Number List
±0.5pF GRM0222C1H8R4DA03#
3.1pF
±0.25pF GRM0223C1H3R1CA03#
8.5pF
±0.5pF GRM0222C1H8R5DA03#
3.2pF
±0.25pF GRM0223C1H3R2CA03#
8.6pF
±0.5pF GRM0222C1H8R6DA03#
3.3pF
±0.25pF GRM0223C1H3R3CA03#
8.7pF
±0.5pF GRM0222C1H8R7DA03#
3.4pF
±0.25pF GRM0223C1H3R4CA03#
8.8pF
±0.5pF GRM0222C1H8R8DA03#
3.5pF
±0.25pF GRM0223C1H3R5CA03#
8.9pF
±0.5pF GRM0222C1H8R9DA03#
3.6pF
±0.25pF GRM0223C1H3R6CA03#
9.0pF
±0.5pF GRM0222C1H9R0DA03#
3.7pF
±0.25pF GRM0223C1H3R7CA03#
9.1pF
±0.5pF GRM0222C1H9R1DA03#
3.8pF
±0.25pF GRM0223C1H3R8CA03#
9.2pF
±0.5pF GRM0222C1H9R2DA03#
3.9pF
±0.25pF GRM0223C1H3R9CA03#
9.3pF
±0.5pF GRM0222C1H9R3DA03#
4.0pF
±0.25pF GRM0222C1H4R0CA03#
9.4pF
±0.5pF GRM0222C1H9R4DA03#
4.1pF
±0.25pF GRM0222C1H4R1CA03#
9.5pF
±0.5pF GRM0222C1H9R5DA03#
4.2pF
±0.25pF GRM0222C1H4R2CA03#
9.6pF
±0.5pF GRM0222C1H9R6DA03#
4.3pF
±0.25pF GRM0222C1H4R3CA03#
9.7pF
±0.5pF GRM0222C1H9R7DA03#
4.4pF
±0.25pF GRM0222C1H4R4CA03#
9.8pF
±0.5pF GRM0222C1H9R8DA03#
4.5pF
±0.25pF GRM0222C1H4R5CA03#
9.9pF
±0.5pF GRM0222C1H9R9DA03#
4.6pF
±0.25pF GRM0222C1H4R6CA03#
10pF
±5%
GRM0222C1H100JA03#
4.7pF
±0.25pF GRM0222C1H4R7CA03#
11pF
±5%
GRM0222C1H110JA03#
4.8pF
±0.25pF GRM0222C1H4R8CA03#
12pF
±5%
GRM0222C1H120JA03#
4.9pF
±0.25pF GRM0222C1H4R9CA03#
13pF
±5%
GRM0222C1H130JA03#
5.0pF
±0.25pF GRM0222C1H5R0CA03#
15pF
±5%
GRM0222C1H150JA03#
5.1pF
±0.5pF GRM0222C1H5R1DA03#
16pF
±5%
GRM0222C1H160JA03#
5.2pF
±0.5pF GRM0222C1H5R2DA03#
18pF
±5%
GRM0222C1H180JA02#
5.3pF
±0.5pF GRM0222C1H5R3DA03#
20pF
±5%
GRM0222C1H200JA02#
5.4pF
±0.5pF GRM0222C1H5R4DA03#
22pF
±5%
GRM0222C1H220JA02#
5.5pF
±0.5pF GRM0222C1H5R5DA03#
24pF
±5%
GRM0222C1H240JA02#
5.6pF
±0.5pF GRM0222C1H5R6DA03#
27pF
±5%
GRM0222C1H270JA02#
5.7pF
±0.5pF GRM0222C1H5R7DA03#
30pF
±5%
GRM0222C1H300JA02#
5.8pF
±0.5pF GRM0222C1H5R8DA03#
33pF
±5%
GRM0222C1H330JA02#
5.9pF
±0.5pF GRM0222C1H5R9DA03#
36pF
±5%
GRM0222C1H360JA02#
6.0pF
±0.5pF GRM0222C1H6R0DA03#
39pF
±5%
GRM0222C1H390JA02#
6.1pF
±0.5pF GRM0222C1H6R1DA03#
43pF
±5%
GRM0222C1H430JA02#
6.2pF
±0.5pF GRM0222C1H6R2DA03#
47pF
±5%
GRM0222C1H470JA02#
6.3pF
±0.5pF GRM0222C1H6R3DA03#
51pF
±5%
GRM0222C1H510JA02#
6.4pF
±0.5pF GRM0222C1H6R4DA03#
56pF
±5%
GRM0222C1H560JA02#
6.5pF
±0.5pF GRM0222C1H6R5DA03#
62pF
±5%
GRM0222C1H620JA02#
6.6pF
±0.5pF GRM0222C1H6R6DA03#
68pF
±5%
GRM0222C1H680JA02#
6.7pF
±0.5pF GRM0222C1H6R7DA03#
75pF
±5%
GRM0222C1H750JA02#
6.8pF
±0.5pF GRM0222C1H6R8DA03#
82pF
±5%
GRM0222C1H820JA02#
6.9pF
±0.5pF GRM0222C1H6R9DA03#
91pF
±5%
GRM0222C1H910JA02#
7.0pF
±0.5pF GRM0222C1H7R0DA03#
100pF
±5%
GRM0222C1H101JA02#
7.1pF
±0.5pF GRM0222C1H7R1DA03#
120pF
±5%
GRM0225C1E121JA02#
7.2pF
±0.5pF GRM0222C1H7R2DA03#
150pF
±5%
GRM0225C1E151JA02#
7.3pF
±0.5pF GRM0222C1H7R3DA03#
180pF
±5%
GRM0225C1E181JA02#
7.4pF
±0.5pF GRM0222C1H7R4DA03#
220pF
±5%
GRM0225C1E221JA02#
7.5pF
±0.5pF GRM0222C1H7R5DA03#
120pF
±5%
GRM0222C1E121JA02#
7.6pF
±0.5pF GRM0222C1H7R6DA03#
150pF
±5%
GRM0222C1E151JA02#
7.7pF
±0.5pF GRM0222C1H7R7DA03#
180pF
±5%
GRM0222C1E181JA02#
7.8pF
±0.5pF GRM0222C1H7R8DA03#
220pF
±5%
GRM0222C1E221JA02#
7.9pF
±0.5pF GRM0222C1H7R9DA03#
120pF
±5%
GRM0225C1C121JA02#
8.0pF
±0.5pF GRM0222C1H8R0DA03#
150pF
±5%
GRM0225C1C151JA02#
25Vdc
C0G
CH
16Vdc
C0G
Part number # indicates the package specification code.
GRJ
8.4pF
GR4
±0.25pF GRM0223C1H3R0CA03#
GJM
±0.5pF GRM0222C1H8R3DA03#
3.0pF
GQM
±0.5pF GRM0222C1H8R2DA03#
8.3pF
GA2
8.2pF
±0.25pF GRM0223C1H2R9CA03#
GA3
GB
±0.25pF GRM0223C1H2R8CA03#
GA3
GD
±0.5pF GRM0222C1H8R1DA03#
CH
GA3
GF
8.1pF
0.22mm 50Vdc
LLL
Part Number
LLA
2.9pF
Tol.
LLM
2.8pF
Cap.
LLR
±0.25pF GRM0223C1H2R7CA03#
Rated
TC
Voltage Code
NFM
2.7pF
T
max.
KRM
CH
Part Number
KR3
CJ
Tol.
GMA
0.22mm 50Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 0.4×0.2mm)
41
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
GRM Series Temperature Compensating Type Part Number List
±5%
GRM0222C1C221JA02#
4.9pF
±0.25pF GRM0335C2A4R9CA01#
5.0pF
±0.25pF GRM0335C2A5R0CA01#
5.1pF
±0.5pF GRM0335C2A5R1DA01#
5.2pF
±0.5pF GRM0335C2A5R2DA01#
5.3pF
±0.5pF GRM0335C2A5R3DA01#
5.4pF
±0.5pF GRM0335C2A5R4DA01#
0.6×0.3mm
T
max.
Rated
TC
Voltage Code
0.33mm 100Vdc C0G
Cap.
Tol.
Part Number
5.5pF
±0.5pF GRM0335C2A5R5DA01#
0.20pF
±0.1pF GRM0335C2AR20BA01#
5.6pF
±0.5pF GRM0335C2A5R6DA01#
0.30pF
±0.1pF GRM0335C2AR30BA01#
5.7pF
±0.5pF GRM0335C2A5R7DA01#
0.40pF
±0.1pF GRM0335C2AR40BA01#
5.8pF
±0.5pF GRM0335C2A5R8DA01#
0.50pF
±0.1pF GRM0335C2AR50BA01#
5.9pF
±0.5pF GRM0335C2A5R9DA01#
0.60pF
±0.1pF GRM0335C2AR60BA01#
6.0pF
±0.5pF GRM0335C2A6R0DA01#
0.70pF
±0.1pF GRM0335C2AR70BA01#
6.1pF
±0.5pF GRM0335C2A6R1DA01#
0.80pF
±0.1pF GRM0335C2AR80BA01#
6.2pF
±0.5pF GRM0335C2A6R2DA01#
0.90pF
±0.1pF GRM0335C2AR90BA01#
6.3pF
±0.5pF GRM0335C2A6R3DA01#
1.0pF
±0.25pF GRM0335C2A1R0CA01#
6.4pF
±0.5pF GRM0335C2A6R4DA01#
1.1pF
±0.25pF GRM0335C2A1R1CA01#
6.5pF
±0.5pF GRM0335C2A6R5DA01#
1.2pF
±0.25pF GRM0335C2A1R2CA01#
6.6pF
±0.5pF GRM0335C2A6R6DA01#
1.3pF
±0.25pF GRM0335C2A1R3CA01#
6.7pF
±0.5pF GRM0335C2A6R7DA01#
1.4pF
±0.25pF GRM0335C2A1R4CA01#
6.8pF
±0.5pF GRM0335C2A6R8DA01#
1.5pF
±0.25pF GRM0335C2A1R5CA01#
6.9pF
±0.5pF GRM0335C2A6R9DA01#
1.6pF
±0.25pF GRM0335C2A1R6CA01#
7.0pF
±0.5pF GRM0335C2A7R0DA01#
1.7pF
±0.25pF GRM0335C2A1R7CA01#
7.1pF
±0.5pF GRM0335C2A7R1DA01#
1.8pF
±0.25pF GRM0335C2A1R8CA01#
7.2pF
±0.5pF GRM0335C2A7R2DA01#
1.9pF
±0.25pF GRM0335C2A1R9CA01#
7.3pF
±0.5pF GRM0335C2A7R3DA01#
2.0pF
±0.25pF GRM0335C2A2R0CA01#
7.4pF
±0.5pF GRM0335C2A7R4DA01#
2.1pF
±0.25pF GRM0335C2A2R1CA01#
7.5pF
±0.5pF GRM0335C2A7R5DA01#
2.2pF
±0.25pF GRM0335C2A2R2CA01#
7.6pF
±0.5pF GRM0335C2A7R6DA01#
2.3pF
±0.25pF GRM0335C2A2R3CA01#
7.7pF
±0.5pF GRM0335C2A7R7DA01#
2.4pF
±0.25pF GRM0335C2A2R4CA01#
7.8pF
±0.5pF GRM0335C2A7R8DA01#
2.5pF
±0.25pF GRM0335C2A2R5CA01#
7.9pF
±0.5pF GRM0335C2A7R9DA01#
2.6pF
±0.25pF GRM0335C2A2R6CA01#
8.0pF
±0.5pF GRM0335C2A8R0DA01#
2.7pF
±0.25pF GRM0335C2A2R7CA01#
8.1pF
±0.5pF GRM0335C2A8R1DA01#
2.8pF
±0.25pF GRM0335C2A2R8CA01#
8.2pF
±0.5pF GRM0335C2A8R2DA01#
2.9pF
±0.25pF GRM0335C2A2R9CA01#
8.3pF
±0.5pF GRM0335C2A8R3DA01#
3.0pF
±0.25pF GRM0335C2A3R0CA01#
8.4pF
±0.5pF GRM0335C2A8R4DA01#
3.1pF
±0.25pF GRM0335C2A3R1CA01#
8.5pF
±0.5pF GRM0335C2A8R5DA01#
3.2pF
±0.25pF GRM0335C2A3R2CA01#
8.6pF
±0.5pF GRM0335C2A8R6DA01#
3.3pF
±0.25pF GRM0335C2A3R3CA01#
8.7pF
±0.5pF GRM0335C2A8R7DA01#
3.4pF
±0.25pF GRM0335C2A3R4CA01#
8.8pF
±0.5pF GRM0335C2A8R8DA01#
3.5pF
±0.25pF GRM0335C2A3R5CA01#
8.9pF
±0.5pF GRM0335C2A8R9DA01#
3.6pF
±0.25pF GRM0335C2A3R6CA01#
9.0pF
±0.5pF GRM0335C2A9R0DA01#
3.7pF
±0.25pF GRM0335C2A3R7CA01#
9.1pF
±0.5pF GRM0335C2A9R1DA01#
3.8pF
±0.25pF GRM0335C2A3R8CA01#
9.2pF
±0.5pF GRM0335C2A9R2DA01#
3.9pF
±0.25pF GRM0335C2A3R9CA01#
9.3pF
±0.5pF GRM0335C2A9R3DA01#
4.0pF
±0.25pF GRM0335C2A4R0CA01#
9.4pF
±0.5pF GRM0335C2A9R4DA01#
4.1pF
±0.25pF GRM0335C2A4R1CA01#
9.5pF
±0.5pF GRM0335C2A9R5DA01#
4.2pF
±0.25pF GRM0335C2A4R2CA01#
9.6pF
±0.5pF GRM0335C2A9R6DA01#
4.3pF
±0.25pF GRM0335C2A4R3CA01#
9.7pF
±0.5pF GRM0335C2A9R7DA01#
0.10pF ±0.05pF GRM0335C2AR10WA01#
Part number # indicates the package specification code.
GRJ
±0.25pF GRM0335C2A4R8CA01#
220pF
GR4
4.8pF
GJM
GRM0222C1C181JA02#
GQM
±5%
GA2
±0.25pF GRM0335C2A4R7CA01#
180pF
GA3
GB
4.7pF
GA3
GD
GRM0222C1C151JA02#
150pF
GA3
GF
±0.25pF GRM0335C2A4R6CA01#
±5%
±5%
LLL
±0.25pF GRM0335C2A4R5CA01#
4.6pF
±5%
120pF
LLA
4.5pF
GRM0222C1C121JA02#
220pF
LLM
GRM0225C1C221JA02#
GRM0225C1C181JA02#
Part Number
LLR
±0.25pF GRM0335C2A4R4CA01#
±5%
Tol.
NFM
4.4pF
180pF
T
max.
KRM
CH
0.33mm 100Vdc C0G
Part Number
KR3
C0G
Cap.
Tol.
GMA
0.22mm 16Vdc
Rated
TC
Voltage Code
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 0.4×0.2mm)
42
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
GRM Series Temperature Compensating Type Part Number List
CJ
GRM0335C2A120JA01#
3.4pF
±0.25pF GRM0333C2A3R4CA01#
15pF
±5%
GRM0335C2A150JA01#
3.5pF
±0.25pF GRM0333C2A3R5CA01#
18pF
±5%
GRM0335C2A180JA01#
3.6pF
±0.25pF GRM0333C2A3R6CA01#
20pF
±5%
GRM0335C2A200JA01#
3.7pF
±0.25pF GRM0333C2A3R7CA01#
22pF
±5%
GRM0335C2A220JA01#
3.8pF
±0.25pF GRM0333C2A3R8CA01#
24pF
±5%
GRM0335C2A240JA01#
3.9pF
±0.25pF GRM0333C2A3R9CA01#
27pF
±5%
GRM0335C2A270JA01#
4.0pF
±0.25pF GRM0332C2A4R0CA01#
30pF
±5%
GRM0335C2A300JA01#
4.1pF
±0.25pF GRM0332C2A4R1CA01#
33pF
±5%
GRM0335C2A330JA01#
4.2pF
±0.25pF GRM0332C2A4R2CA01#
36pF
±5%
GRM0335C2A360JA01#
4.3pF
±0.25pF GRM0332C2A4R3CA01#
39pF
±5%
GRM0335C2A390JA01#
4.4pF
±0.25pF GRM0332C2A4R4CA01#
43pF
±5%
GRM0335C2A430JA01#
4.5pF
±0.25pF GRM0332C2A4R5CA01#
47pF
±5%
GRM0335C2A470JA01#
4.6pF
±0.25pF GRM0332C2A4R6CA01#
51pF
±5%
GRM0335C2A510JA01#
4.7pF
±0.25pF GRM0332C2A4R7CA01#
56pF
±5%
GRM0335C2A560JA01#
4.8pF
±0.25pF GRM0332C2A4R8CA01#
62pF
±5%
GRM0335C2A620JA01#
4.9pF
±0.25pF GRM0332C2A4R9CA01#
68pF
±5%
GRM0335C2A680JA01#
5.0pF
±0.25pF GRM0332C2A5R0CA01#
75pF
±5%
GRM0335C2A750JA01#
5.1pF
±0.5pF GRM0332C2A5R1DA01#
82pF
±5%
GRM0335C2A820JA01#
5.2pF
±0.5pF GRM0332C2A5R2DA01#
91pF
±5%
GRM0335C2A910JA01#
5.3pF
±0.5pF GRM0332C2A5R3DA01#
100pF
±5%
GRM0335C2A101JA01#
5.4pF
±0.5pF GRM0332C2A5R4DA01#
5.5pF
±0.5pF GRM0332C2A5R5DA01#
0.10pF ±0.05pF GRM0334C2AR10WA01#
CH
0.20pF
±0.1pF GRM0334C2AR20BA01#
5.6pF
±0.5pF GRM0332C2A5R6DA01#
0.30pF
±0.1pF GRM0334C2AR30BA01#
5.7pF
±0.5pF GRM0332C2A5R7DA01#
0.40pF
±0.1pF GRM0334C2AR40BA01#
5.8pF
±0.5pF GRM0332C2A5R8DA01#
0.50pF
±0.1pF GRM0334C2AR50BA01#
5.9pF
±0.5pF GRM0332C2A5R9DA01#
0.60pF
±0.1pF GRM0334C2AR60BA01#
6.0pF
±0.5pF GRM0332C2A6R0DA01#
0.70pF
±0.1pF GRM0334C2AR70BA01#
6.1pF
±0.5pF GRM0332C2A6R1DA01#
0.80pF
±0.1pF GRM0334C2AR80BA01#
6.2pF
±0.5pF GRM0332C2A6R2DA01#
0.90pF
±0.1pF GRM0334C2AR90BA01#
6.3pF
±0.5pF GRM0332C2A6R3DA01#
1.0pF
±0.25pF GRM0334C2A1R0CA01#
6.4pF
±0.5pF GRM0332C2A6R4DA01#
1.1pF
±0.25pF GRM0334C2A1R1CA01#
6.5pF
±0.5pF GRM0332C2A6R5DA01#
1.2pF
±0.25pF GRM0334C2A1R2CA01#
6.6pF
±0.5pF GRM0332C2A6R6DA01#
1.3pF
±0.25pF GRM0334C2A1R3CA01#
6.7pF
±0.5pF GRM0332C2A6R7DA01#
1.4pF
±0.25pF GRM0334C2A1R4CA01#
6.8pF
±0.5pF GRM0332C2A6R8DA01#
1.5pF
±0.25pF GRM0334C2A1R5CA01#
6.9pF
±0.5pF GRM0332C2A6R9DA01#
1.6pF
±0.25pF GRM0334C2A1R6CA01#
7.0pF
±0.5pF GRM0332C2A7R0DA01#
1.7pF
±0.25pF GRM0334C2A1R7CA01#
7.1pF
±0.5pF GRM0332C2A7R1DA01#
1.8pF
±0.25pF GRM0334C2A1R8CA01#
7.2pF
±0.5pF GRM0332C2A7R2DA01#
1.9pF
±0.25pF GRM0334C2A1R9CA01#
7.3pF
±0.5pF GRM0332C2A7R3DA01#
2.0pF
±0.25pF GRM0334C2A2R0CA01#
7.4pF
±0.5pF GRM0332C2A7R4DA01#
2.1pF
±0.25pF GRM0333C2A2R1CA01#
7.5pF
±0.5pF GRM0332C2A7R5DA01#
2.2pF
±0.25pF GRM0333C2A2R2CA01#
7.6pF
±0.5pF GRM0332C2A7R6DA01#
2.3pF
±0.25pF GRM0333C2A2R3CA01#
7.7pF
±0.5pF GRM0332C2A7R7DA01#
2.4pF
±0.25pF GRM0333C2A2R4CA01#
7.8pF
±0.5pF GRM0332C2A7R8DA01#
2.5pF
±0.25pF GRM0333C2A2R5CA01#
7.9pF
±0.5pF GRM0332C2A7R9DA01#
2.6pF
±0.25pF GRM0333C2A2R6CA01#
8.0pF
±0.5pF GRM0332C2A8R0DA01#
2.7pF
±0.25pF GRM0333C2A2R7CA01#
8.1pF
±0.5pF GRM0332C2A8R1DA01#
2.8pF
±0.25pF GRM0333C2A2R8CA01#
8.2pF
±0.5pF GRM0332C2A8R2DA01#
2.9pF
±0.25pF GRM0333C2A2R9CA01#
8.3pF
±0.5pF GRM0332C2A8R3DA01#
3.0pF
±0.25pF GRM0333C2A3R0CA01#
8.4pF
±0.5pF GRM0332C2A8R4DA01#
Part number # indicates the package specification code.
GRJ
±5%
GR4
±0.25pF GRM0333C2A3R3CA01#
12pF
GJM
3.3pF
GQM
±0.25pF GRM0333C2A3R2CA01#
GRM0335C2A100JA01#
GA2
3.2pF
±5%
GA3
GB
±0.5pF GRM0335C2A9R9DA01#
10pF
GA3
GD
±0.25pF GRM0333C2A3R1CA01#
CJ
GA3
GF
3.1pF
0.33mm 100Vdc
LLL
Part Number
LLA
Tol.
LLM
CK
Cap.
LLR
9.9pF
Rated
TC
Voltage Code
NFM
±0.5pF GRM0335C2A9R8DA01#
T
max.
KRM
9.8pF
Part Number
KR3
0.33mm 100Vdc C0G
Tol.
GMA
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 0.6×0.3mm)
43
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
GRM Series Temperature Compensating Type Part Number List
±0.25pF GRM0335C1H2R1CA01#
8.9pF
±0.5pF GRM0332C2A8R9DA01#
2.2pF
±0.25pF GRM0335C1H2R2CA01#
9.0pF
±0.5pF GRM0332C2A9R0DA01#
2.3pF
±0.25pF GRM0335C1H2R3CA01#
9.1pF
±0.5pF GRM0332C2A9R1DA01#
2.4pF
±0.25pF GRM0335C1H2R4CA01#
9.2pF
±0.5pF GRM0332C2A9R2DA01#
2.5pF
±0.25pF GRM0335C1H2R5CA01#
9.3pF
±0.5pF GRM0332C2A9R3DA01#
2.6pF
±0.25pF GRM0335C1H2R6CA01#
9.4pF
±0.5pF GRM0332C2A9R4DA01#
2.7pF
±0.25pF GRM0335C1H2R7CA01#
9.5pF
±0.5pF GRM0332C2A9R5DA01#
2.8pF
±0.25pF GRM0335C1H2R8CA01#
9.6pF
±0.5pF GRM0332C2A9R6DA01#
2.9pF
±0.25pF GRM0335C1H2R9CA01#
9.7pF
±0.5pF GRM0332C2A9R7DA01#
3.0pF
±0.25pF GRM0335C1H3R0CA01#
9.8pF
±0.5pF GRM0332C2A9R8DA01#
3.1pF
±0.25pF GRM0335C1H3R1CA01#
9.9pF
±0.5pF GRM0332C2A9R9DA01#
3.2pF
±0.25pF GRM0335C1H3R2CA01#
10pF
±5%
GRM0332C2A100JA01#
3.3pF
±0.25pF GRM0335C1H3R3CA01#
12pF
±5%
GRM0332C2A120JA01#
3.4pF
±0.25pF GRM0335C1H3R4CA01#
15pF
±5%
GRM0332C2A150JA01#
3.5pF
±0.25pF GRM0335C1H3R5CA01#
18pF
±5%
GRM0332C2A180JA01#
3.6pF
±0.25pF GRM0335C1H3R6CA01#
20pF
±5%
GRM0332C2A200JA01#
3.7pF
±0.25pF GRM0335C1H3R7CA01#
22pF
±5%
GRM0332C2A220JA01#
3.8pF
±0.25pF GRM0335C1H3R8CA01#
24pF
±5%
GRM0332C2A240JA01#
3.9pF
±0.25pF GRM0335C1H3R9CA01#
27pF
±5%
GRM0332C2A270JA01#
4.0pF
±0.25pF GRM0335C1H4R0CA01#
30pF
±5%
GRM0332C2A300JA01#
4.1pF
±0.25pF GRM0335C1H4R1CA01#
33pF
±5%
GRM0332C2A330JA01#
4.2pF
±0.25pF GRM0335C1H4R2CA01#
36pF
±5%
GRM0332C2A360JA01#
4.3pF
±0.25pF GRM0335C1H4R3CA01#
39pF
±5%
GRM0332C2A390JA01#
4.4pF
±0.25pF GRM0335C1H4R4CA01#
43pF
±5%
GRM0332C2A430JA01#
4.5pF
±0.25pF GRM0335C1H4R5CA01#
47pF
±5%
GRM0332C2A470JA01#
4.6pF
±0.25pF GRM0335C1H4R6CA01#
51pF
±5%
GRM0332C2A510JA01#
4.7pF
±0.25pF GRM0335C1H4R7CA01#
56pF
±5%
GRM0332C2A560JA01#
4.8pF
±0.25pF GRM0335C1H4R8CA01#
62pF
±5%
GRM0332C2A620JA01#
4.9pF
±0.25pF GRM0335C1H4R9CA01#
68pF
±5%
GRM0332C2A680JA01#
5.0pF
±0.25pF GRM0335C1H5R0CA01#
75pF
±5%
GRM0332C2A750JA01#
5.1pF
±0.5pF GRM0335C1H5R1DA01#
82pF
±5%
GRM0332C2A820JA01#
5.2pF
±0.5pF GRM0335C1H5R2DA01#
91pF
±5%
GRM0332C2A910JA01#
5.3pF
±0.5pF GRM0335C1H5R3DA01#
100pF
±5%
GRM0332C2A101JA01#
5.4pF
±0.5pF GRM0335C1H5R4DA01#
5.5pF
±0.5pF GRM0335C1H5R5DA01#
0.10pF ±0.05pF GRM0335C1HR10WA01#
0.20pF
±0.1pF GRM0335C1HR20BA01#
5.6pF
±0.5pF GRM0335C1H5R6DA01#
0.30pF
±0.1pF GRM0335C1HR30BA01#
5.7pF
±0.5pF GRM0335C1H5R7DA01#
0.40pF
±0.1pF GRM0335C1HR40BA01#
5.8pF
±0.5pF GRM0335C1H5R8DA01#
0.50pF
±0.1pF GRM0335C1HR50BA01#
5.9pF
±0.5pF GRM0335C1H5R9DA01#
0.60pF
±0.1pF GRM0335C1HR60BA01#
6.0pF
±0.5pF GRM0335C1H6R0DA01#
0.70pF
±0.1pF GRM0335C1HR70BA01#
6.1pF
±0.5pF GRM0335C1H6R1DA01#
0.80pF
±0.1pF GRM0335C1HR80BA01#
6.2pF
±0.5pF GRM0335C1H6R2DA01#
0.90pF
±0.1pF GRM0335C1HR90BA01#
6.3pF
±0.5pF GRM0335C1H6R3DA01#
1.0pF
±0.25pF GRM0335C1H1R0CA01#
6.4pF
±0.5pF GRM0335C1H6R4DA01#
1.1pF
±0.25pF GRM0335C1H1R1CA01#
6.5pF
±0.5pF GRM0335C1H6R5DA01#
1.2pF
±0.25pF GRM0335C1H1R2CA01#
6.6pF
±0.5pF GRM0335C1H6R6DA01#
1.3pF
±0.25pF GRM0335C1H1R3CA01#
6.7pF
±0.5pF GRM0335C1H6R7DA01#
1.4pF
±0.25pF GRM0335C1H1R4CA01#
6.8pF
±0.5pF GRM0335C1H6R8DA01#
1.5pF
±0.25pF GRM0335C1H1R5CA01#
6.9pF
±0.5pF GRM0335C1H6R9DA01#
1.6pF
±0.25pF GRM0335C1H1R6CA01#
7.0pF
±0.5pF GRM0335C1H7R0DA01#
1.7pF
±0.25pF GRM0335C1H1R7CA01#
7.1pF
±0.5pF GRM0335C1H7R1DA01#
Part number # indicates the package specification code.
GRJ
2.1pF
GR4
±0.5pF GRM0332C2A8R8DA01#
GJM
±0.25pF GRM0335C1H2R0CA01#
8.8pF
GQM
±0.25pF GRM0335C1H1R9CA01#
2.0pF
GA2
1.9pF
±0.5pF GRM0332C2A8R7DA01#
GA3
GB
±0.5pF GRM0332C2A8R6DA01#
GA3
GD
±0.25pF GRM0335C1H1R8CA01#
C0G
GA3
GF
1.8pF
0.33mm 50Vdc
LLL
Part Number
LLA
8.7pF
Tol.
LLM
8.6pF
Cap.
LLR
±0.5pF GRM0332C2A8R5DA01#
Rated
TC
Voltage Code
NFM
8.5pF
T
max.
KRM
C0G
Part Number
KR3
50Vdc
CH
Tol.
GMA
0.33mm 100Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 0.6×0.3mm)
44
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
GRM Series Temperature Compensating Type Part Number List
CK
±0.25pF GRM0334C1H1R3CA01#
7.6pF
±0.5pF GRM0335C1H7R6DA01#
1.4pF
±0.25pF GRM0334C1H1R4CA01#
7.7pF
±0.5pF GRM0335C1H7R7DA01#
1.5pF
±0.25pF GRM0334C1H1R5CA01#
7.8pF
±0.5pF GRM0335C1H7R8DA01#
1.6pF
±0.25pF GRM0334C1H1R6CA01#
7.9pF
±0.5pF GRM0335C1H7R9DA01#
1.7pF
±0.25pF GRM0334C1H1R7CA01#
8.0pF
±0.5pF GRM0335C1H8R0DA01#
1.8pF
±0.25pF GRM0334C1H1R8CA01#
8.1pF
±0.5pF GRM0335C1H8R1DA01#
1.9pF
±0.25pF GRM0334C1H1R9CA01#
8.2pF
±0.5pF GRM0335C1H8R2DA01#
2.0pF
±0.25pF GRM0334C1H2R0CA01#
8.3pF
±0.5pF GRM0335C1H8R3DA01#
2.1pF
±0.25pF GRM0333C1H2R1CA01#
8.4pF
±0.5pF GRM0335C1H8R4DA01#
2.2pF
±0.25pF GRM0333C1H2R2CA01#
8.5pF
±0.5pF GRM0335C1H8R5DA01#
2.3pF
±0.25pF GRM0333C1H2R3CA01#
8.6pF
±0.5pF GRM0335C1H8R6DA01#
2.4pF
±0.25pF GRM0333C1H2R4CA01#
8.7pF
±0.5pF GRM0335C1H8R7DA01#
2.5pF
±0.25pF GRM0333C1H2R5CA01#
8.8pF
±0.5pF GRM0335C1H8R8DA01#
2.6pF
±0.25pF GRM0333C1H2R6CA01#
8.9pF
±0.5pF GRM0335C1H8R9DA01#
2.7pF
±0.25pF GRM0333C1H2R7CA01#
9.0pF
±0.5pF GRM0335C1H9R0DA01#
2.8pF
±0.25pF GRM0333C1H2R8CA01#
9.1pF
±0.5pF GRM0335C1H9R1DA01#
2.9pF
±0.25pF GRM0333C1H2R9CA01#
9.2pF
±0.5pF GRM0335C1H9R2DA01#
3.0pF
±0.25pF GRM0333C1H3R0CA01#
9.3pF
±0.5pF GRM0335C1H9R3DA01#
3.1pF
±0.25pF GRM0333C1H3R1CA01#
9.4pF
±0.5pF GRM0335C1H9R4DA01#
3.2pF
±0.25pF GRM0333C1H3R2CA01#
9.5pF
±0.5pF GRM0335C1H9R5DA01#
3.3pF
±0.25pF GRM0333C1H3R3CA01#
9.6pF
±0.5pF GRM0335C1H9R6DA01#
3.4pF
±0.25pF GRM0333C1H3R4CA01#
9.7pF
±0.5pF GRM0335C1H9R7DA01#
3.5pF
±0.25pF GRM0333C1H3R5CA01#
9.8pF
±0.5pF GRM0335C1H9R8DA01#
3.6pF
±0.25pF GRM0333C1H3R6CA01#
9.9pF
±0.5pF GRM0335C1H9R9DA01#
CJ
3.7pF
±0.25pF GRM0333C1H3R7CA01#
10pF
±5%
GRM0335C1H100JA01#
3.8pF
±0.25pF GRM0333C1H3R8CA01#
12pF
±5%
GRM0335C1H120JA01#
3.9pF
±0.25pF GRM0333C1H3R9CA01#
15pF
±5%
GRM0335C1H150JA01#
4.0pF
±0.25pF GRM0332C1H4R0CA01#
18pF
±5%
GRM0335C1H180JA01#
4.1pF
±0.25pF GRM0332C1H4R1CA01#
22pF
±5%
GRM0335C1H220JA01#
4.2pF
±0.25pF GRM0332C1H4R2CA01#
27pF
±5%
GRM0335C1H270JA01#
4.3pF
±0.25pF GRM0332C1H4R3CA01#
33pF
±5%
GRM0335C1H330JA01#
4.4pF
±0.25pF GRM0332C1H4R4CA01#
39pF
±5%
GRM0335C1H390JA01#
4.5pF
±0.25pF GRM0332C1H4R5CA01#
47pF
±5%
GRM0335C1H470JA01#
4.6pF
±0.25pF GRM0332C1H4R6CA01#
56pF
±5%
GRM0335C1H560JA01#
4.7pF
±0.25pF GRM0332C1H4R7CA01#
68pF
±5%
GRM0335C1H680JA01#
4.8pF
±0.25pF GRM0332C1H4R8CA01#
82pF
±5%
GRM0335C1H820JA01#
4.9pF
±0.25pF GRM0332C1H4R9CA01#
100pF
±5%
GRM0335C1H101JA01#
5.0pF
±0.25pF GRM0332C1H5R0CA01#
120pF
±5%
GRM0335C1H121JA01#
5.1pF
±0.5pF GRM0332C1H5R1DA01#
150pF
±5%
GRM0335C1H151JA01#
5.2pF
±0.5pF GRM0332C1H5R2DA01#
180pF
±5%
GRM0335C1H181JA01#
5.3pF
±0.5pF GRM0332C1H5R3DA01#
220pF
±5%
GRM0335C1H221JA01#
5.4pF
±0.5pF GRM0332C1H5R4DA01#
5.5pF
±0.5pF GRM0332C1H5R5DA01#
0.10pF ±0.05pF GRM0334C1HR10WA01#
CH
0.20pF
±0.1pF GRM0334C1HR20BA01#
5.6pF
±0.5pF GRM0332C1H5R6DA01#
0.30pF
±0.1pF GRM0334C1HR30BA01#
5.7pF
±0.5pF GRM0332C1H5R7DA01#
0.40pF
±0.1pF GRM0334C1HR40BA01#
5.8pF
±0.5pF GRM0332C1H5R8DA01#
0.50pF
±0.1pF GRM0334C1HR50BA01#
5.9pF
±0.5pF GRM0332C1H5R9DA01#
0.60pF
±0.1pF GRM0334C1HR60BA01#
6.0pF
±0.5pF GRM0332C1H6R0DA01#
0.70pF
±0.1pF GRM0334C1HR70BA01#
6.1pF
±0.5pF GRM0332C1H6R1DA01#
0.80pF
±0.1pF GRM0334C1HR80BA01#
6.2pF
±0.5pF GRM0332C1H6R2DA01#
0.90pF
±0.1pF GRM0334C1HR90BA01#
6.3pF
±0.5pF GRM0332C1H6R3DA01#
Part number # indicates the package specification code.
GRJ
1.3pF
GR4
±0.5pF GRM0335C1H7R5DA01#
GJM
±0.25pF GRM0334C1H1R2CA01#
7.5pF
GQM
±0.25pF GRM0334C1H1R1CA01#
1.2pF
GA2
1.1pF
±0.5pF GRM0335C1H7R4DA01#
GA3
GB
±0.5pF GRM0335C1H7R3DA01#
GA3
GD
±0.25pF GRM0334C1H1R0CA01#
CK
GA3
GF
1.0pF
0.33mm 50Vdc
LLL
Part Number
LLA
7.4pF
Tol.
LLM
7.3pF
Cap.
LLR
±0.5pF GRM0335C1H7R2DA01#
Rated
TC
Voltage Code
NFM
7.2pF
T
max.
KRM
Part Number
KR3
C0G
Tol.
GMA
0.33mm 50Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 0.6×0.3mm)
45
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
GRM Series Temperature Compensating Type Part Number List
25Vdc
C0G
±0.5pF GRM0332C1H6R5DA01#
390pF
±5%
GRM0335C1E391JA01#
6.6pF
±0.5pF GRM0332C1H6R6DA01#
470pF
±5%
GRM0335C1E471JA01#
6.7pF
±0.5pF GRM0332C1H6R7DA01#
560pF
±5%
GRM0335C1E561JA01#
6.8pF
±0.5pF GRM0332C1H6R8DA01#
680pF
±5%
GRM0335C1E681JA01#
6.9pF
±0.5pF GRM0332C1H6R9DA01#
820pF
±5%
GRM0335C1E821JA01#
7.0pF
±0.5pF GRM0332C1H7R0DA01#
910pF
±5%
GRM0335C1E911JA01#
7.1pF
±0.5pF GRM0332C1H7R1DA01#
1000pF
±5%
GRM0335C1E102JA01#
7.2pF
±0.5pF GRM0332C1H7R2DA01#
270pF
±5%
GRM0332C1E271JA01#
7.3pF
±0.5pF GRM0332C1H7R3DA01#
330pF
±5%
GRM0332C1E331JA01#
7.4pF
±0.5pF GRM0332C1H7R4DA01#
390pF
±5%
GRM0332C1E391JA01#
7.5pF
±0.5pF GRM0332C1H7R5DA01#
470pF
±5%
GRM0332C1E471JA01#
7.6pF
±0.5pF GRM0332C1H7R6DA01#
560pF
±5%
GRM0332C1E561JA01#
7.7pF
±0.5pF GRM0332C1H7R7DA01#
680pF
±5%
GRM0332C1E681JA01#
7.8pF
±0.5pF GRM0332C1H7R8DA01#
820pF
±5%
GRM0332C1E821JA01#
7.9pF
±0.5pF GRM0332C1H7R9DA01#
1000pF
±5%
GRM0332C1E102JA01#
8.0pF
±0.5pF GRM0332C1H8R0DA01#
8.1pF
±0.5pF GRM0332C1H8R1DA01#
8.2pF
±0.5pF GRM0332C1H8R2DA01#
8.3pF
±0.5pF GRM0332C1H8R3DA01#
8.4pF
±0.5pF GRM0332C1H8R4DA01#
Cap.
Tol.
Part Number
8.5pF
±0.5pF GRM0332C1H8R5DA01#
150pF
±5%
GRM1555C2A151JE01#
8.6pF
±0.5pF GRM0332C1H8R6DA01#
220pF
±5%
GRM1555C2A221JE01#
8.7pF
±0.5pF GRM0332C1H8R7DA01#
330pF
±5%
GRM1555C2A331JE01#
8.8pF
±0.5pF GRM0332C1H8R8DA01#
470pF
±5%
GRM1555C2A471JE01#
8.9pF
±0.5pF GRM0332C1H8R9DA01#
680pF
±5%
GRM1555C2A681JE01#
9.0pF
±0.5pF GRM0332C1H9R0DA01#
1000pF
±5%
GRM1555C2A102JE01#
9.1pF
±0.5pF GRM0332C1H9R1DA01#
270pF
±5%
GRM1555C1H271JA01#
9.2pF
±0.5pF GRM0332C1H9R2DA01#
330pF
±5%
GRM1555C1H331JA01#
9.3pF
±0.5pF GRM0332C1H9R3DA01#
390pF
±5%
GRM1555C1H391JA01#
9.4pF
±0.5pF GRM0332C1H9R4DA01#
470pF
±5%
GRM1555C1H471JA01#
9.5pF
±0.5pF GRM0332C1H9R5DA01#
560pF
±5%
GRM1555C1H561JA01#
9.6pF
±0.5pF GRM0332C1H9R6DA01#
680pF
±5%
GRM1555C1H681JA01#
9.7pF
±0.5pF GRM0332C1H9R7DA01#
820pF
±5%
GRM1555C1H821JA01#
9.8pF
±0.5pF GRM0332C1H9R8DA01#
1000pF
±5%
GRM1555C1H102JA01#
9.9pF
±0.5pF GRM0332C1H9R9DA01#
1200pF
±5%
GRM1555C1H122JA01#
0.55mm 100Vdc C0G
50Vdc
C0G
10pF
±5%
GRM0332C1H100JA01#
1500pF
±5%
GRM1555C1H152JA01#
12pF
±5%
GRM0332C1H120JA01#
1800pF
±5%
GRM1555C1H182JA01#
15pF
±5%
GRM0332C1H150JA01#
2200pF
±5%
GRM1555C1H222JA01#
18pF
±5%
GRM0332C1H180JA01#
3300pF
±5%
GRM1555C1H332JE01#
22pF
±5%
GRM0332C1H220JA01#
270pF
±5%
GRM1552C1H271JA01#
27pF
±5%
GRM0332C1H270JA01#
330pF
±5%
GRM1552C1H331JA01#
33pF
±5%
GRM0332C1H330JA01#
390pF
±5%
GRM1552C1H391JA01#
39pF
±5%
GRM0332C1H390JA01#
470pF
±5%
GRM1552C1H471JA01#
47pF
±5%
GRM0332C1H470JA01#
560pF
±5%
GRM1552C1H561JA01#
56pF
±5%
GRM0332C1H560JA01#
680pF
±5%
GRM1552C1H681JA01#
68pF
±5%
GRM0332C1H680JA01#
820pF
±5%
GRM1552C1H821JA01#
82pF
±5%
GRM0332C1H820JA01#
1000pF
±5%
GRM1552C1H102JA01#
100pF
±5%
GRM0332C1H101JA01#
U2J 2700pF
±5%
GRM1557U1A272JA01#
120pF
±5%
GRM0332C1H121JA01#
3300pF
±5%
GRM1557U1A332JA01#
150pF
±5%
GRM0332C1H151JA01#
3900pF
±5%
GRM1557U1A392JA01#
180pF
±5%
GRM0332C1H181JA01#
4700pF
±5%
GRM1557U1A472JA01#
220pF
±5%
GRM0332C1H221JA01#
2700pF
±5%
GRM1553U1A272JA01#
270pF
±5%
GRM0335C1E271JA01#
3300pF
±5%
GRM1553U1A332JA01#
CH
10Vdc
UJ
Part number # indicates the package specification code.
GA3
GF
Rated
TC
Voltage Code
LLL
T
max.
GA3
GD
1.0×0.5mm
LLA
CH
LLM
C0G
GRJ
GRM0335C1E331JA01#
6.5pF
0.33mm 25Vdc
GR4
±5%
±0.5pF GRM0332C1H6R4DA01#
GJM
330pF
6.4pF
GQM
Part Number
GA2
Tol.
GA3
GB
Cap.
LLR
Rated
TC
Voltage Code
NFM
T
max.
KRM
Part Number
KR3
CH
Tol.
GMA
0.33mm 50Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 0.6×0.3mm)
46
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
GRM Series Temperature Compensating Type Part Number List
±5%
GRM1553U1A472JA01#
2700pF
±5%
GRM1885C1H272JA01#
±5%
GRM1555C1H472JE01#
3300pF
±5%
GRM1885C1H332JA01#
6800pF
±5%
GRM1555C1H682JE01#
3900pF
±5%
GRM1885C1H392JA01#
35Vdc
C0G 10000pF
±5%
GRM1555CYA103JE01#
4700pF
±5%
GRM1885C1H472JA01#
25Vdc
C0G 10000pF
±5%
GRM1555C1E103JE01#
5600pF
±5%
GRM1885C1H562JA01#
6800pF
±5%
GRM1885C1H682JA01#
8200pF
±5%
GRM1885C1H822JA01#
10000pF
±5%
GRM1885C1H103JA01#
1000pF
±5%
GRM1882C1H102JA01#
1200pF
±5%
GRM1882C1H122JA01#
1.6×0.8mm
Tol.
Part Number
U2J 2200pF
±5%
GRM1857U1H222JA44#
1500pF
±5%
GRM1882C1H152JA01#
2700pF
±5%
GRM1857U1H272JA44#
1800pF
±5%
GRM1882C1H182JA01#
3300pF
±5%
GRM1857U1H332JA44#
2200pF
±5%
GRM1882C1H222JA01#
3900pF
±5%
GRM1857U1H392JA44#
2700pF
±5%
GRM1882C1H272JA01#
4700pF
±5%
GRM1857U1H472JA44#
3300pF
±5%
GRM1882C1H332JA01#
2200pF
±5%
GRM1853U1H222JA44#
3900pF
±5%
GRM1882C1H392JA01#
2700pF
±5%
GRM1853U1H272JA44#
4700pF
±5%
GRM1882C1H472JA01#
3300pF
±5%
GRM1853U1H332JA44#
5600pF
±5%
GRM1882C1H562JA01#
3900pF
±5%
GRM1853U1H392JA44#
6800pF
±5%
GRM1882C1H682JA01#
4700pF
±5%
GRM1853U1H472JA44#
8200pF
±5%
GRM1882C1H822JA01#
U2J 5600pF
±5%
GRM1857U1A562JA44#
10000pF
±5%
GRM1882C1H103JA01#
6800pF
±5%
GRM1857U1A682JA44#
U2J 12000pF
±5%
GRM1887U1A123JA01#
8200pF
±5%
GRM1857U1A822JA44#
15000pF
±5%
GRM1887U1A153JA01#
10000pF
±5%
GRM1857U1A103JA44#
18000pF
±5%
GRM1887U1A183JA01#
5600pF
±5%
GRM1853U1A562JA44#
22000pF
±5%
GRM1887U1A223JA01#
6800pF
±5%
GRM1853U1A682JA44#
UJ 12000pF
±5%
GRM1883U1A123JA01#
UJ
10Vdc
UJ
0.9mm 250Vdc C0G
10Vdc
8200pF
±5%
GRM1853U1A822JA44#
15000pF
±5%
GRM1883U1A153JA01#
10000pF
±5%
GRM1853U1A103JA44#
18000pF
±5%
GRM1883U1A183JA01#
10pF
±5%
GRM1885C2E100JW07#
22000pF
±5%
GRM1883U1A223JA01#
15pF
±5%
GRM1885C2E150JW07#
22pF
±5%
GRM1885C2E220JW07#
33pF
±5%
GRM1885C2E330JW07#
47pF
Cap.
Tol.
Part Number
2.0×1.25mm
±5%
GRM1885C2E470JW07#
100Vdc C0G 1000pF
±5%
GRM1885C2A102JA01#
1200pF
±5%
GRM1885C2A122JA01#
0.65mm 100Vdc C0G 5600pF
±5%
GRM2165C2A562JA01#
1500pF
±5%
GRM1885C2A152JA01#
6800pF
±5%
GRM2165C2A682JA01#
1800pF
±5%
GRM1885C2A182JA01#
8200pF
±5%
GRM2165C2A822JA01#
2200pF
±5%
GRM1885C2A222JA01#
10000pF
±5%
GRM2165C2A103JA01#
2700pF
±5%
GRM1885C2A272JA01#
12000pF
±5%
GRM2165C2A123JA01#
3300pF
±5%
GRM1885C2A332JA01#
15000pF
±5%
GRM2165C2A153JA01#
3900pF
±5%
GRM1885C2A392JA01#
C0G 18000pF
±5%
GRM2165C1H183JA01#
1000pF
±5%
GRM1882C2A102JA01#
22000pF
±5%
GRM2165C1H223JA01#
1200pF
±5%
GRM1882C2A122JA01#
27000pF
±5%
GRM2165C1H273JA01#
1500pF
±5%
GRM1882C2A152JA01#
33000pF
±5%
GRM2165C1H333JA01#
1800pF
±5%
GRM1882C2A182JA01#
0.7mm 100Vdc C0G 1000pF
±5%
GRM2165C2A102JA01#
2200pF
±5%
GRM1882C2A222JA01#
1200pF
±5%
GRM2165C2A122JA01#
2700pF
±5%
GRM1882C2A272JA01#
1500pF
±5%
GRM2165C2A152JA01#
3300pF
±5%
GRM1882C2A332JA01#
1800pF
±5%
GRM2165C2A182JA01#
3900pF
±5%
GRM1882C2A392JA01#
2200pF
±5%
GRM2165C2A222JA01#
C0G 1000pF
±5%
GRM1885C1H102JA01#
2700pF
±5%
GRM2165C2A272JA01#
1200pF
±5%
GRM1885C1H122JA01#
3300pF
±5%
GRM2165C2A332JA01#
1500pF
±5%
GRM1885C1H152JA01#
3900pF
±5%
GRM2165C2A392JA01#
1800pF
±5%
GRM1885C1H182JA01#
4700pF
±5%
GRM2165C2A472JA01#
CH
50Vdc
T
max.
Rated
TC
Voltage Code
50Vdc
Part number # indicates the package specification code.
LLR
50Vdc
Cap.
NFM
0.5mm
Rated
TC
Voltage Code
KRM
T
max.
CH
GRJ
4700pF
C0G 4700pF
GR4
GRM1885C1H222JA01#
GJM
±5%
GQM
C0G 2200pF
GA2
50Vdc
GA3
GB
0.9mm
Part Number
GA3
GD
GRM1553U1A392JA01#
Tol.
GA3
GF
±5%
Cap.
LLL
3900pF
Rated
TC
Voltage Code
LLA
T
max.
LLM
Part Number
KR3
0.65mm 50Vdc
UJ
Tol.
GMA
0.55mm 10Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 1.0×0.5mm)
47
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
GRM Series Temperature Compensating Type Part Number List
GRM21A5C2E680JW01#
2200pF
±5%
GRM2162C2A222JA01#
100pF
±5%
GRM21A5C2E101JW01#
2700pF
±5%
GRM2162C2A272JA01#
150pF
±5%
GRM21A5C2E151JW01#
3300pF
±5%
GRM2162C2A332JA01#
220pF
±5%
GRM21A5C2E221JW01#
3900pF
±5%
GRM2162C2A392JA01#
330pF
±5%
GRM21A5C2E331JW01#
4700pF
±5%
GRM2162C2A472JA01#
470pF
±5%
GRM21A5C2E471JWA1#
C0G 2700pF
±5%
GRM2165C1H272JA01#
680pF
±5%
GRM21A5C2E681JWA1#
3300pF
±5%
GRM2165C1H332JA01#
1000pF
±5%
GRM21A5C2E102JWA1#
3900pF
±5%
GRM2165C1H392JA01#
1500pF
±5%
GRM21A5C2E152JWA1#
4700pF
±5%
GRM2165C1H472JA01#
2200pF
±5%
GRM21A5C2E222JWA1#
2700pF
±5%
GRM2162C1H272JA01#
100pF
±5%
GRM21A7U2E101JW31#
3300pF
±5%
GRM2162C1H332JA01#
150pF
±5%
GRM21A7U2E151JW31#
3900pF
±5%
GRM2162C1H392JA01#
220pF
±5%
GRM21A7U2E221JW31#
4700pF
±5%
GRM2162C1H472JA01#
330pF
±5%
GRM21A7U2E331JW31#
0.95mm 100Vdc C0G 5600pF
±5%
GRM2195C2A562JA01#
470pF
±5%
GRM21A7U2E471JW31#
6800pF
±5%
GRM2195C2A682JA01#
680pF
±5%
GRM21A7U2E681JW31#
8200pF
±5%
GRM2195C2A822JA01#
1000pF
±5%
GRM21A7U2E102JW31#
10000pF
±5%
GRM2195C2A103JA01#
1500pF
±5%
GRM21A7U2E152JW31#
15000pF
±5%
GRM2195C2A153JA01#
2200pF
±5%
GRM21A7U2E222JW31#
50Vdc
CH
5600pF
±5%
GRM2192C2A562JA01#
10pF
±5%
GRM21A5C2D100JW01#
6800pF
±5%
GRM2192C2A682JA01#
15pF
±5%
GRM21A5C2D150JW01#
8200pF
±5%
GRM2192C2A822JA01#
22pF
±5%
GRM21A5C2D220JW01#
10000pF
±5%
GRM2192C2A103JA01#
33pF
±5%
GRM21A5C2D330JW01#
15000pF
±5%
GRM2192C2A153JA01#
47pF
±5%
GRM21A5C2D470JW01#
C0G 5600pF
±5%
GRM2195C1H562JA01#
68pF
±5%
GRM21A5C2D680JW01#
6800pF
±5%
GRM2195C1H682JA01#
100pF
±5%
GRM21A5C2D101JW01#
8200pF
±5%
GRM2195C1H822JA01#
150pF
±5%
GRM21A5C2D151JW01#
10000pF
±5%
GRM2195C1H103JA01#
220pF
±5%
GRM21A5C2D221JW01#
12000pF
±5%
GRM2195C1H123JA01#
330pF
±5%
GRM21A5C2D331JW01#
15000pF
±5%
GRM2195C1H153JA01#
100pF
±5%
GRM21A7U2D101JW31#
5600pF
±5%
GRM2192C1H562JA01#
150pF
±5%
GRM21A7U2D151JW31#
6800pF
±5%
GRM2192C1H682JA01#
220pF
±5%
GRM21A7U2D221JW31#
8200pF
±5%
GRM2192C1H822JA01#
330pF
±5%
GRM21A7U2D331JW31#
10000pF
±5%
GRM2192C1H103JA01#
470pF
±5%
GRM21A7U2D471JW31#
12000pF
±5%
GRM2192C1H123JA01#
680pF
±5%
GRM21A7U2D681JW31#
CH
50Vdc
CH
10Vdc
U2J
200Vdc C0G
U2J
15000pF
±5%
GRM2192C1H153JA01#
1000pF
±5%
GRM21A7U2D102JW31#
U2J 56000pF
±5%
GRM2197U1A563JA01#
1500pF
±5%
GRM21A7U2D152JW31#
UJ 56000pF
±5%
GRM2193U1A563JA01#
2200pF
±5%
GRM21A7U2D222JW31#
10pF
±5%
GRM21A5C2J100JWA1#
1.35mm 100Vdc C0G 22000pF
±5%
GRM21B5C2A223JA01#
15pF
±5%
GRM21A5C2J150JWA1#
CH 22000pF
±5%
GRM21B2C2A223JA01#
22pF
±5%
GRM21A5C2J220JWA1#
C0G 18000pF
±5%
GRM21B5C1H183JA01#
33pF
±5%
GRM21A5C2J330JWA1#
22000pF
±5%
GRM21B5C1H223JA01#
47pF
±5%
GRM21A5C2J470JWA1#
CH 18000pF
±5%
GRM21B2C1H183JA01#
68pF
±5%
GRM21A5C2J680JWA1#
22000pF
±5%
GRM21B2C1H223JA01#
100pF
±5%
GRM21A5C2J101JWA1#
U2J 39000pF
±5%
GRM21B7U1H393JA01#
150pF
±5%
GRM21A5C2J151JWA1#
47000pF
±5%
GRM21B7U1H473JA01#
220pF
±5%
GRM21A5C2J221JWA1#
UJ 39000pF
±5%
GRM21B3U1H393JA01#
330pF
±5%
GRM21A5C2J331JWA1#
47000pF
±5%
GRM21B3U1H473JA01#
470pF
±5%
GRM21A5C2J471JWA1#
U2J 68000pF
±5%
GRM21B7U1A683JA01#
10pF
±5%
GRM21A5C2E100JW01#
82000pF
±5%
GRM21B7U1A823JA01#
15pF
±5%
GRM21A5C2E150JW01#
0.10µF
±5%
GRM21B7U1A104JA01#
1.0mm 630Vdc C0G
250Vdc C0G
50Vdc
10Vdc
Part number # indicates the package specification code.
GRJ
±5%
GR4
68pF
GJM
GRM2162C2A182JA01#
GQM
GRM21A5C2E470JW01#
±5%
1800pF
GA2
GRM21A5C2E330JW01#
±5%
GA3
GB
±5%
47pF
±5%
GA3
GD
33pF
GRM2162C2A152JA01#
±5%
1500pF
GA3
GF
GRM2162C2A122JA01#
1200pF
LLL
GRM21A5C2E220JW01#
GRM2162C2A102JA01#
LLA
±5%
±5%
LLM
22pF
1000pF
LLR
1.0mm 250Vdc C0G
CH
NFM
Part Number
0.7mm 100Vdc
T
max.
KRM
Tol.
Part Number
KR3
Cap.
Tol.
GMA
Rated
TC
Voltage Code
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 2.0×1.25mm)
48
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
GRM Series Temperature Compensating Type Part Number List
±5%
GRM3192C1H123JA01#
15000pF
±5%
680pF
±5%
GRM3192C1H153JA01#
GRM21B5C2J681JWA3#
18000pF
±5%
1000pF
GRM3192C1H183JA01#
±5%
GRM21B5C2J102JWA3#
22000pF
±5%
GRM3192C1H223JA01#
1500pF
±5%
GRM21B5C2J152JWAA#
27000pF
±5%
GRM3192C1H273JA01#
2200pF
±5%
GRM21B5C2J222JWAA#
33000pF
±5%
GRM3192C1H333JA01#
250Vdc C0G 3300pF
±5%
GRM21B5C2E332JWA1#
39000pF
±5%
GRM3192C1H393JA01#
4700pF
±5%
GRM21B5C2E472JWA1#
10pF
±5%
GRM31A7U3D100JW31#
6800pF
±5%
GRM21B5C2E682JWAA#
15pF
±5%
GRM31A7U3D150JW31#
10000pF
±5%
GRM21B5C2E103JWAA#
22pF
±5%
GRM31A7U3D220JW31#
U2J 3300pF
±5%
GRM21B7U2E332JW32#
33pF
±5%
GRM31A7U3D330JW31#
4700pF
±5%
GRM21B7U2E472JW32#
47pF
±5%
GRM31A7U3D470JW31#
200Vdc U2J 3300pF
±5%
GRM21B7U2D332JW32#
68pF
±5%
GRM31A7U3D680JW31#
4700pF
±5%
GRM21B7U2D472JW32#
10pF
±5%
GRM31A5C3A100JW01#
15pF
±5%
GRM31A5C3A150JW01#
22pF
±5%
GRM31A5C3A220JW01#
33pF
±5%
GRM31A5C3A330JW01#
47pF
±5%
GRM31A5C3A470JW01#
68pF
±5%
GRM31A5C3A680JW01#
1.0mm 2000Vdc U2J
1000Vdc C0G
3.2×1.6mm
T
max.
Rated
TC
Voltage Code
Tol.
Part Number
0.95mm 100Vdc C0G 4700pF
±5%
GRM3195C2A472JA01#
100pF
±5%
GRM31A5C3A101JW01#
5600pF
±5%
GRM3195C2A562JA01#
150pF
±5%
GRM31A5C3A151JW01#
6800pF
±5%
GRM3195C2A682JA01#
220pF
±5%
GRM31A5C3A221JW01#
8200pF
±5%
GRM3195C2A822JA01#
330pF
±5%
GRM31A5C3A331JWA1#
10000pF
±5%
GRM3195C2A103JA01#
470pF
±5%
GRM31A5C3A471JWA1#
12000pF
±5%
GRM3195C2A123JA01#
10pF
±5%
GRM31A7U3A100JW31#
15000pF
±5%
GRM3195C2A153JA01#
15pF
±5%
GRM31A7U3A150JW31#
18000pF
±5%
GRM3195C2A183JA01#
22pF
±5%
GRM31A7U3A220JW31#
22000pF
±5%
GRM3195C2A223JA01#
33pF
±5%
GRM31A7U3A330JW31#
27000pF
±5%
GRM3195C2A273JA01#
47pF
±5%
GRM31A7U3A470JW31#
33000pF
±5%
GRM3195C2A333JA01#
68pF
±5%
GRM31A7U3A680JW31#
39000pF
±5%
GRM3195C2A393JA01#
100pF
±5%
GRM31A7U3A101JW31#
U2J
D1
5600pF
±5%
GRM3192C2A562JA01#
150pF
±5%
GRM31A7U3A151JW31#
6800pF
±5%
GRM3192C2A682JA01#
220pF
±5%
GRM31A7U3A221JW31#
8200pF
±5%
GRM3192C2A822JA01#
330pF
±5%
GRM31A7U3A331JW31#
10000pF
±5%
GRM3192C2A103JA01#
10pF
±5%
GRM31A5C2J100JW01#
12000pF
±5%
GRM3192C2A123JA01#
15pF
±5%
GRM31A5C2J150JW01#
15000pF
±5%
GRM3192C2A153JA01#
22pF
±5%
GRM31A5C2J220JW01#
18000pF
±5%
GRM3192C2A183JA01#
33pF
±5%
GRM31A5C2J330JW01#
22000pF
±5%
GRM3192C2A223JA01#
47pF
±5%
GRM31A5C2J470JW01#
27000pF
±5%
GRM3192C2A273JA01#
68pF
±5%
GRM31A5C2J680JW01#
33000pF
±5%
GRM3192C2A333JA01#
100pF
±5%
GRM31A5C2J101JW01#
39000pF
±5%
GRM3192C2A393JA01#
150pF
±5%
GRM31A5C2J151JW01#
C0G 12000pF
±5%
GRM3195C1H123JA01#
220pF
±5%
GRM31A5C2J221JW01#
15000pF
±5%
GRM3195C1H153JA01#
330pF
±5%
GRM31A5C2J331JW01#
18000pF
±5%
GRM3195C1H183JA01#
470pF
±5%
GRM31A5C2J471JW01#
22000pF
±5%
GRM3195C1H223JA01#
1500pF
±5%
GRM31A5C2J152JWA1#
27000pF
±5%
GRM3195C1H273JA01#
10pF
±5%
GRM31A7U2J100JW31#
33000pF
±5%
GRM3195C1H333JA01#
15pF
±5%
GRM31A7U2J150JW31#
39000pF
±5%
GRM3195C1H393JA01#
22pF
±5%
GRM31A7U2J220JW31#
47000pF
±5%
GRM3195C1H473JA05#
33pF
±5%
GRM31A7U2J330JW31#
56000pF
±5%
GRM3195C1H563JA05#
47pF
±5%
GRM31A7U2J470JW31#
68000pF
±5%
GRM3195C1H683JA05#
68pF
±5%
GRM31A7U2J680JW31#
82000pF
±5%
GRM3195C1H823JA05#
100pF
±5%
GRM31A7U2J101JW31#
CH
50Vdc
Cap.
630Vdc C0G
D1
U2J
Part number # indicates the package specification code.
GRJ
CH 12000pF
GR4
GRM21B3U1A104JA01#
GJM
GRM21B3U1A823JA01#
±5%
GQM
±5%
0.10µF
GA2
82000pF
GA3
GB
GRM3195C1H104JA05#
GA3
GD
±5%
C0G
GA3
GF
0.10µF
0.95mm 50Vdc
LLL
Part Number
LLA
Tol.
LLM
GRM21B3U1A683JA01#
1.45mm 630Vdc C0G
Cap.
LLR
±5%
Rated
TC
Voltage Code
NFM
UJ 68000pF
T
max.
KRM
Part Number
KR3
Tol.
GMA
1.35mm 10Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 2.0×1.25mm)
49
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
GRM Series Temperature Compensating Type Part Number List
Part Number
CH 47000pF
±5%
GRM31M2C1H473JA01#
GRM31A7U2J221JW31#
56000pF
±5%
GRM31M2C1H563JA01#
GRM31A7U2J331JW31#
U2J 68000pF
±5%
GRM31M7U1H683JA01#
±5%
GRM31A7U2J471JW31#
82000pF
±5%
GRM31M7U1H823JA01#
680pF
±5%
GRM31A7U2J681JW31#
0.10µF
±5%
GRM31M7U1H104JA01#
1000pF
±5%
GRM31A7U2J102JW31#
UJ 68000pF
±5%
GRM31M3U1H683JA01#
1500pF
±5%
GRM31A7U2J152JW31#
82000pF
±5%
GRM31M3U1H823JA01#
2200pF
±5%
GRM31A7U2J222JW31#
0.10µF
±5%
GRM31M3U1H104JA01#
10pF
±5%
GRM31A5C2H100JW01#
1.8mm 1000Vdc C0G 1000pF
±5%
GRM31C5C3A102JWA3#
15pF
±5%
GRM31A5C2H150JW01#
U2J 1000pF
±5%
GRM31C7U3A102JW32#
22pF
±5%
GRM31A5C2H220JW01#
630Vdc C0G 3300pF
±5%
GRM31C5C2J332JWA3#
33pF
±5%
GRM31A5C2H330JW01#
4700pF
±5%
GRM31C5C2J472JWA3#
47pF
±5%
GRM31A5C2H470JW01#
6800pF
±5%
GRM31C5C2J682JWA3#
68pF
±5%
GRM31A5C2H680JW01#
10000pF
±5%
GRM31C5C2J103JWA3#
100pF
±5%
GRM31A5C2H101JW01#
U2J 4700pF
±5%
GRM31C7U2J472JW32#
150pF
±5%
GRM31A5C2H151JW01#
500Vdc U2J 4700pF
±5%
GRM31C7U2H472JW32#
220pF
±5%
GRM31A5C2H221JW01#
250Vdc C0G 15000pF
±5%
GRM31C5C2E153JWA3#
330pF
±5%
GRM31A5C2H331JW01#
22000pF
±5%
GRM31C5C2E223JWA3#
470pF
±5%
GRM31A5C2H471JW01#
100Vdc C0G 68000pF
±5%
GRM31C5C2A683JA01#
D1
10pF
±5%
GRM31A7U2H100JW31#
82000pF
±5%
GRM31C5C2A823JA01#
D1
15pF
±5%
GRM31A7U2H150JW31#
0.10µF
±5%
GRM31C5C2A104JA01#
D1
22pF
±5%
GRM31A7U2H220JW31#
CH 68000pF
±5%
GRM31C2C2A683JA01#
D1
33pF
±5%
GRM31A7U2H330JW31#
82000pF
±5%
GRM31C2C2A823JA01#
D1
47pF
±5%
GRM31A7U2H470JW31#
0.10µF
±5%
GRM31C2C2A104JA01#
D1
68pF
±5%
GRM31A7U2H680JW31#
C0G 68000pF
±5%
GRM31C5C1H683JA01#
100pF
±5%
GRM31A7U2H101JW31#
82000pF
±5%
GRM31C5C1H823JA01#
150pF
±5%
GRM31A7U2H151JW31#
0.10µF
±5%
GRM31C5C1H104JA01#
220pF
±5%
GRM31A7U2H221JW31#
0.15µF
330pF
±5%
GRM31A7U2H331JW31#
470pF
±5%
GRM31A7U2H471JW31#
50Vdc
0.22µF
GRM31A7U2H681JW31#
±5%
GRM31C5C1H224JE02#
GRM31A7U2H102JW31#
CH 68000pF
±5%
GRM31C2C1H683JA01#
1500pF
±5%
GRM31A7U2H152JW31#
82000pF
±5%
GRM31C2C1H823JA01#
2200pF
±5%
GRM31A7U2H222JW31#
0.10µF
±5%
GRM31C2C1H104JA01#
1.25mm 1000Vdc C0G
680pF
±5%
GRM31B5C3A681JWA1#
U2J
470pF
±5%
GRM31B7U3A471JW31#
680pF
±5%
GRM31B7U3A681JW31#
680pF
±5%
GRM31B5C2J681JW01#
1000pF
±5%
GRM31B5C2J102JW01#
Cap.
Tol.
Part Number
2200pF
±5%
GRM31B5C2J222JWA1#
100pF
±5%
GRM32A7U3D101JW31#
U2J 3300pF
±5%
GRM31B7U2J332JW31#
150pF
±5%
GRM32A7U3D151JW31#
680pF
±5%
GRM31B5C2H681JW01#
630Vdc U2J 1500pF
±5%
GRM32A7U2J152JW31#
1000pF
±5%
GRM31B5C2H102JW01#
2200pF
±5%
GRM32A7U2J222JW31#
U2J 3300pF
±5%
GRM31B7U2H332JW31#
500Vdc U2J 1500pF
±5%
GRM32A7U2H152JW31#
250Vdc U2J 6800pF
±5%
GRM31B7U2E682JW31#
2200pF
±5%
GRM32A7U2H222JW31#
±5%
GRM31B7U2E103JW31#
220pF
±5%
GRM32B7U3D221JW31#
±5%
GRM31B7U2D682JW31#
1.5mm 1000Vdc U2J 1500pF
±5%
GRM32Q7U3A152JW31#
±5%
GRM31B7U2D103JW31#
630Vdc U2J 6800pF
±5%
GRM32Q7U2J682JW31#
100Vdc C0G 47000pF
±5%
GRM31M5C2A473JA01#
500Vdc U2J 6800pF
±5%
GRM32Q7U2H682JW31#
56000pF
±5%
GRM31M5C2A563JA01# D1
2.0mm 1000Vdc U2J 2200pF
±5%
GRM32D7U3A222JW31#
CH 47000pF
±5%
GRM31M2C2A473JA01#
630Vdc U2J 10000pF
±5%
GRM32D7U2J103JW31#
56000pF
±5%
GRM31M2C2A563JA01# D1
500Vdc U2J 10000pF
±5%
GRM32D7U2H103JW31#
C0G 47000pF
±5%
GRM31M5C1H473JA01#
2.7mm 630Vdc U2J 15000pF
±5%
GRM32E7U2J153JW32#
56000pF
±5%
GRM31M5C1H563JA01#
10000pF
50Vdc
GR4
GRM31C5C1H224GE02# D1
±5%
200Vdc U2J 6800pF
GJM
±2%
±5%
10000pF
GQM
GRM31C5C1H154GE02# D1
GRM31C5C1H154JE02#
680pF
500Vdc C0G
GA2
±2%
±5%
1000pF
630Vdc C0G
GA3
GB
470pF
D1
D1
Rated
TC
Voltage Code
1.0mm 2000Vdc U2J
1.25mm 2000Vdc U2J
NFM
3.2×2.5mm
T
max.
GA3
GD
±5%
GA3
GF
±5%
330pF
LLL
220pF
1.25mm 50Vdc
GRJ
Tol.
LLA
GRM31A7U2J151JW31#
Cap.
LLM
±5%
Rated
TC
Voltage Code
LLR
150pF
T
max.
Part number # indicates the package specification code.
KRM
U2J
Part Number
KR3
500Vdc C0G
Tol.
GMA
1.0mm 630Vdc U2J
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 3.2×1.6mm)
50
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GR3
GRM Series Temperature Compensating Type Part Number List
Tol.
Part Number
±5%
GRM42A7U3F100JW31#
±5%
GRM42A7U3F150JW31#
22pF
±5%
GRM42A7U3F220JW31#
33pF
±5%
GRM42A7U3F330JW31#
47pF
±5%
GRM42A7U3F470JW31#
68pF
±5%
GRM42A7U3F680JW31#
100pF
±5%
GRM42A7U3F101JW31#
Cap.
Tol.
Part Number
1.5mm 1000Vdc U2J 3300pF
±5%
GRM43Q7U3A332JW31#
2.0mm 1000Vdc U2J 4700pF
±5%
GRM43D7U3A472JW31#
630Vdc U2J 15000pF
±5%
GRM43D7U2J153JW31#
22000pF
±5%
GRM43D7U2J223JW31#
500Vdc U2J 15000pF
±5%
GRM43D7U2H153JW31#
22000pF
±5%
GRM43D7U2H223JW31#
Cap.
Tol.
Part Number
1.5mm 1000Vdc U2J 6800pF
±5%
GRM55Q7U3A682JW31#
2.0mm 1000Vdc U2J 10000pF
±5%
GRM55D7U3A103JW31#
630Vdc U2J 33000pF
±5%
GRM55D7U2J333JW31#
47000pF
±5%
GRM55D7U2J473JW31#
500Vdc U2J 33000pF
±5%
GRM55D7U2H333JW31#
47000pF
±5%
GRM55D7U2H473JW31#
GQM
10pF
15pF
1.0mm 3150Vdc U2J
GR4
Cap.
GJM
Rated
TC
Voltage Code
GRJ
4.5×2.0mm
T
max.
GA3
GB
GA3
GD
GA3
GF
Rated
TC
Voltage Code
GA2
4.5×3.2mm
T
max.
LLA
LLM
LLR
NFM
KRM
KR3
GMA
GMD
!Caution
/Notice
Rated
TC
Voltage Code
LLL
5.7×5.0mm
T
max.
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Part number # indicates the package specification code.
51
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
0.22mm 10Vdc
Part Number
±10% GRM011R61A221KE01#
100pF
±10% GRM022R61A101KA01#
150pF
±10% GRM022R61A151KA01#
±20% GRM022R71A102MA12#
±20% GRM022R61A151MA01#
±20% GRM011R61A221ME01#
470pF
±10% GRM011R61A471KE01#
220pF
±10% GRM022R61A221KA01#
330pF
±10% GRM022R61A331KA01#
470pF
±10% GRM022R61A471KA01#
680pF
±10% GRM022R61A681KE19#
1000pF
±10% GRM022R61A102KE19#
1500pF
±10% GRM022R61A152KE19#
2200pF
±10% GRM022R61A222KE19#
3300pF
±10% GRM022R61A332KE19#
±20% GRM022R61A221MA01#
±20% GRM011R61A471ME01#
X5R 1000pF
±10% GRM011R60J102KE01#
1500pF
±10% GRM011R60J152KE01#
2200pF
±10% GRM011R60J222KE01#
±20% GRM022R61A331MA01#
3300pF
±10% GRM011R60J332KE01#
D1
4700pF
±10% GRM011R60J472KE01#
D1
6800pF
±10% GRM011R60J682KE01#
D1
10000pF ±10% GRM011R60J103KE01#
D1
±20% GRM022R61A471MA01#
±20% GRM022R61A681ME19#
±20% GRM022R61A102ME19#
0.4×0.2mm
±20% GRM022R61A332ME19#
±20% GRM022R71C101ME14#
±10% GRM022R71C151KE14#
4700pF
±10% GRM022R61A472KE19#
6800pF
±10% GRM022R61A682KE19#
±10% GRM022R71C221KE14#
±20% GRM022R71C221ME14#
±20% GRM022R61A682ME19#
330pF
±10% GRM022R71C331KE14#
10000pF ±10% GRM022R61A103KE19#
470pF
±10% GRM022R71C471KE14#
1000pF
±10% GRM022R71C102KE14#
±20% GRM022R61A103ME19#
±20% GRM022R71C331ME14#
B
100pF
±10% GRM022B11A101KA01#
150pF
±10% GRM022B11A151KA01#
±20% GRM022B11A101MA01#
±20% GRM022R71C471ME14#
±20% GRM022B11A151MA01#
±20% GRM022R71C102ME14#
X5R 1000pF
±10% GRM022R61C102KE01#
D1
220pF
±10% GRM022B11A221KA01#
330pF
±10% GRM022B11A331KA01#
470pF
±10% GRM022B11A471KA01#
±20% GRM022R61C102ME01# D1
2200pF
±10% GRM022R61C222KE01#
4700pF
±10% GRM022R61C472KE01#
D1
±20% GRM022B11A221MA01#
±20% GRM022R61C222ME01# D1
D1
±20% GRM022B11A331MA01#
±20% GRM022R61C472ME01# D1
10000pF ±10% GRM022R61C103KE01#
D1
±20% GRM022B11A471MA01#
680pF
±10% GRM022B31A681KE19#
1000pF
±10% GRM022B31A102KE19#
1500pF
±10% GRM022B31A152KE19#
2200pF
±10% GRM022B31A222KE19#
3300pF
±10% GRM022B31A332KE19#
±20% GRM022R61C103ME01# D1
10Vdc
X7R
100pF
±10% GRM022R71A101KA01#
150pF
±10% GRM022R71A151KA01#
220pF
±10% GRM022R71A221KA01#
330pF
±10% GRM022R71A331KA01#
±20% GRM022B31A681ME19#
±20% GRM022B31A102ME19#
±20% GRM022R71A101MA01#
±20% GRM022B31A152ME19#
±20% GRM022R71A151MA01#
±20% GRM022B31A222ME19#
±20% GRM022R71A221MA01#
±20% GRM022B31A332ME19#
±20% GRM022R71A331MA01#
470pF
±10% GRM022R71A471KA01#
LLA
220pF
LLL
±20% GRM022R61A472ME19#
±20% GRM022R71C151ME14#
LLM
150pF
GA3
GF
±20% GRM022R61A222ME19#
±10% GRM022R71C101KE14#
LLR
100pF
Part Number
NFM
X7R
Tol.
KRM
0.22mm 16Vdc
Cap.
GA3
GD
±20% GRM022R61A152ME19#
Rated
TC
Voltage Code
KR3
T
max.
4700pF
±10% GRM022B31A472KE19#
6800pF
±10% GRM022B31A682KE19#
±20% GRM022B31A472ME19#
±20% GRM022R71A471MA01#
680pF
±10% GRM022R71A681KA12#
±20% GRM022R71A681MA12#
±20% GRM022B31A682ME19#
820pF
±10% GRM022R71A821KA12#
10000pF ±10% GRM022B31A103KE19#
±20% GRM022R71A821MA12#
±20% GRM022B31A103ME19#
Part number # indicates the package specification code.
GMA
6.3Vdc
GR3
±20% GRM022R61A101MA01#
±20% GRM011R61A101ME01#
GR4
220pF
X5R
GJM
±10% GRM011R61A101KE01#
±10% GRM022R71A102KA12#
GQM
100pF
X7R 1000pF
GA2
X5R
Tol.
Part Number
GMD
0.138mm 10Vdc
Cap.
Tol.
GA3
GB
Rated
TC
Voltage Code
Cap.
!Caution
/Notice
T
max.
Rated
TC
Voltage Code
GRJ
T
max.
0.25×0.125mm
GRM
GRM Series High Dielectric Constant Type Part Number List
52
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
GRM Series High Dielectric Constant Type Part Number List
B
100pF
±10% GRM033B31H101KA12#
150pF
±10% GRM033B31H151KA12#
220pF
±10% GRM033B31H221KA12#
330pF
±10% GRM033B31H331KA12#
470pF
±10% GRM033B31H471KA12#
680pF
±10% GRM033B31H681KA12#
1000pF
±10% GRM033B31H102KA12#
1500pF
±10% GRM033B31H152KA12#
0.10µF
±10% GRM033R6YA104KE14#
±20% GRM033B31H151MA12#
D1
±20% GRM022R60J223ME15# D1
±20% GRM033B31H221MA12#
33000pF ±20% GRM022R60J333ME15# D1
47000pF ±20% GRM022R60J473ME15# D1
±20% GRM033B31H331MA12#
68000pF ±20% GRM022R60J683ME15# D1
0.10µF
±20% GRM022R60J104ME15# D1
1000pF
±20% GRM022B30J102ME19#
1500pF
±20% GRM022B30J152ME19#
2200pF
±20% GRM022B30J222ME19#
3300pF
±20% GRM022B30J332ME19#
4700pF
±20% GRM022B30J472ME19#
6800pF
±20% GRM022B30J682ME19#
10000pF ±20% GRM022B30J103ME19#
4Vdc
X6T
0.10µF
±20% GRM033B31H471MA12#
±20% GRM033B31H681MA12#
±20% GRM033B31H102MA12#
±20% GRM033B31H152MA12#
35Vdc
X5R
±20% GRM022D80G104ME15# D1
X5R 15000pF ±10% GRM022R60G153KE15#
X7R 1000pF
±10% GRM033R71E102KA01#
1500pF
±10% GRM033R71E152KA01#
22000pF ±10% GRM022R60G223KE15#
2200pF
±10% GRM033R71E222KA12#
3300pF
±10% GRM033R71E332KA12#
4700pF
±10% GRM033R71E472KE14#
25Vdc
±20% GRM022R60G223ME15#
±20% GRM033R71E222MA12#
33000pF ±10% GRM022R60G333KE15#
±20% GRM022R60G333ME15#
±20% GRM033R71E332MA12#
47000pF ±10% GRM022R60G473KE15#
68000pF ±20% GRM022R60G683ME15#
0.25mm
2.5Vdc
X6T
0.10µF
±20% GRM022D80E104ME15#
4Vdc
X6T
0.47µF
±20% GRM022D80G474ME01# D1
2.5Vdc
X7T
0.47µF
±20% GRM022D70E474ME01# D1
X6T
0.47µF
±20% GRM022D80E474ME01#
6800pF
Rated
TC
Voltage Code
0.33mm 50Vdc
X7R
Cap.
100pF
Tol.
10000pF ±10% GRM033R71E103KE14#
150pF
R
±10% GRM033R71H101KA12#
X6S
100pF
±10% GRM033R11E101KA01#
150pF
±10% GRM033R11E151KA01#
220pF
±10% GRM033R11E221KA01#
330pF
±10% GRM033R11E331KA01#
470pF
±10% GRM033R11E471KA01#
680pF
±10% GRM033R11E681KA01#
1000pF
±10% GRM033R11E102KA01#
1500pF
±10% GRM033R11E152KA01#
0.10µF
±10% GRM033C81E104KE14#
D1
D1
±20% GRM033C81E104ME14# D1
±10% GRM033R71H151KA12#
±20% GRM033R71H151MA12#
D1
±20% GRM033R71E103ME14# D1
Part Number
±20% GRM033R71H101MA12#
±10% GRM033R71E682KE14#
±20% GRM033R71E682ME14# D1
0.6×0.3mm
T
max.
D1
±20% GRM033R71E472ME14# D1
±20% GRM022R60G473ME15#
±20% GRM022R60G104ME15#
D1
±20% GRM033R6YA104ME14# D1
±20% GRM022R60G153ME15#
0.10µF
GJM
±20% GRM033B31H101MA12#
15000pF ±20% GRM022R60J153ME15# D1
B
GR4
±20% GRM033R71H152MA12#
10000pF ±20% GRM022R60J103ME19#
22000pF ±10% GRM022R60J223KE15#
GRJ
±10% GRM033R61H471KA12#
GQM
±20% GRM022R60J682ME19#
470pF
GA2
±20% GRM022R60J472ME19#
6800pF
X5R
GA3
GB
4700pF
±10% GRM033R71H152KA12#
GA3
GD
±20% GRM022R60J332ME19#
1500pF
X5R 4700pF
±10% GRM033R61E472KA12# D1
±20% GRM033R61E472MA12# D1
220pF
±10% GRM033R71H221KA12#
330pF
±10% GRM033R71H331KA12#
±20% GRM033R61E682MA12# D1
±20% GRM033R71H331MA12#
10000pF ±10% GRM033R61E103KA12# D1
470pF
±10% GRM033R71H471KA12#
±20% GRM033R71H221MA12#
±20% GRM033R71H471MA12#
680pF
1000pF
6800pF
±10% GRM033R71H102KA12#
±10% GRM033R61E682KA12# D1
±20% GRM033R61E103MA12# D1
0.10µF
±10% GRM033R61E104KE14#
0.22µF
±10% GRM033R61E224KE01#
±10% GRM033R71H681KA12#
±20% GRM033R71H681MA12#
GA3
GF
3300pF
±20% GRM033R71H102MA12#
LLL
±20% GRM022R60J222ME19#
X7R 1000pF
LLA
±20% GRM022R60J152ME19#
2200pF
Part Number
LLM
1500pF
0.33mm 50Vdc
Tol.
NFM
±20% GRM022R60J102ME19#
Cap.
KRM
X5R 1000pF
Rated
TC
Voltage Code
LLR
T
max.
Part Number
KR3
Tol.
±20% GRM033R61E104ME14#
GMA
0.22mm 6.3Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 0.4×0.2mm)
D1
±20% GRM033R61E224ME01# D1
Part number # indicates the package specification code.
53
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
GRM Series High Dielectric Constant Type Part Number List
±10% GRM033B31E332KA12#
±20% GRM033R71A682MA01#
±20% GRM033B31E332MA12#
10000pF ±10% GRM033R71A103KA01#
10000pF ±10% GRM033B31E103KA12# D1
±20% GRM033R71A103MA01#
±20% GRM033B31E103MA12# D1
X7R 2200pF
±10% GRM033R71C222KA88#
3300pF
±10% GRM033R71C332KA88#
4700pF
±10% GRM033R71C472KE14#
X7S
R
±10% GRM033R11A472KA01#
6800pF
±10% GRM033R11A682KA01#
±20% GRM033R11A472MA01#
±20% GRM033R11A682MA01#
±20% GRM033R71C682ME14#
10000pF ±10% GRM033R11A103KA01#
10000pF ±10% GRM033R71C103KE14#
±20% GRM033R11A103MA01#
±20% GRM033R71C103ME14#
0.10µF
±10% GRM033C71C104KE14#
X5R 4700pF
±10% GRM033R61A472KA01#
6800pF
±10% GRM033R61A682KA01#
D1
±20% GRM033R61A472MA01#
±20% GRM033C71C104ME14# D1
X6S
4700pF
±10% GRM033R71C682KE14#
6800pF
R
±10% GRM033C71A104KE14#
±20% GRM033C71A104ME14#
±20% GRM033R71C472ME14#
X7S
0.10µF
2200pF
±10% GRM033R11C222KA88#
±20% GRM033R61A682MA01#
3300pF
±10% GRM033R11C332KA88#
15000pF ±10% GRM033R61A153KE84#
0.10µF
±10% GRM033C81C104KE14#
±20% GRM033R61A153ME84#
±20% GRM033C81C104ME14#
22000pF ±10% GRM033R61A223KE84#
X5R 10000pF ±10% GRM033R61C103KA12#
±20% GRM033R61A223ME84#
±20% GRM033R61C103MA12#
33000pF ±10% GRM033R61A333KE84#
D1
±20% GRM033R61A333ME84#
±20% GRM033R61C153ME84# D1
47000pF ±10% GRM033R61A473KE84#
15000pF ±10% GRM033R61C153KE84#
D1
±20% GRM033R61A473ME84#
±20% GRM033R61C223ME84# D1
68000pF ±10% GRM033R61A683KE84#
22000pF ±10% GRM033R61C223KE84#
33000pF ±10% GRM033R61C333KE84#
D1
±20% GRM033R61A683ME84#
±20% GRM033R61C333ME84# D1
47000pF ±10% GRM033R61C473KE84#
0.10µF
D1
68000pF ±10% GRM033R61C683KE84#
D1
B
0.22µF
±20% GRM033R61A224ME90# D1
4700pF
±10% GRM033B11A472KA01#
6800pF
±10% GRM033B11A682KA01#
±20% GRM033R61C683ME84# D1
0.10µF
B
±20% GRM033B11A472MA01#
±10% GRM033R61C104KE14#
±20% GRM033R61C104ME14#
±20% GRM033B11A682MA01#
0.22µF
±10% GRM033R61C224KE14#
15000pF ±10% GRM033B31A153KE84#
2200pF
±10% GRM033B31C222KA87#
±20% GRM033B31A153ME84#
±20% GRM033B31C222MA87#
22000pF ±10% GRM033B31A223KE84#
3300pF
±10% GRM033B31C332KA87#
±20% GRM033B31A223ME84#
±20% GRM033B31C332MA87#
33000pF ±10% GRM033B31A333KE84#
10000pF ±10% GRM033B31C103KA12#
±20% GRM033B31A333ME84#
±20% GRM033B31C103MA12#
47000pF ±10% GRM033B31A473KE84#
D1
±20% GRM033B31A473ME84#
±20% GRM033B31C153ME84# D1
68000pF ±10% GRM033B31A683KE84#
D1
±20% GRM033B31A683ME84#
15000pF ±10% GRM033B31C153KE84#
22000pF ±10% GRM033B31C223KE84#
±20% GRM033B31C223ME84# D1
33000pF ±10% GRM033B31C333KE84#
±20% GRM033B31C333ME84# D1
47000pF ±10% GRM033B31C473KE84#
0.10µF
±10% GRM033B31A104KE84#
X7R 4700pF
±10% GRM033R70J472KA01#
6800pF
±10% GRM033R70J682KA01#
D1
±20% GRM033B31A104ME84#
6.3Vdc
D1
±20% GRM033B31C473ME84# D1
68000pF ±10% GRM033B31C683KE84#
D1
GRJ
±10% GRM033R61A104KE84#
±20% GRM033R61A104ME84#
±20% GRM033R61C473ME84# D1
GR4
±20% GRM033R71A472MA01#
GJM
±10% GRM033R71A682KA01#
GQM
6800pF
GA2
±10% GRM033R71A472KA01#
GA3
GB
X7R 4700pF
GA3
GD
10Vdc
±20% GRM033B31E222MA12#
16Vdc
D1
±20% GRM033B31C104ME84# D1
±20% GRM033B11E152MA01#
3300pF
±10% GRM033B31C104KE84#
GA3
GF
±10% GRM033B31E222KA12#
0.10µF
LLL
2200pF
±20% GRM033B11E102MA01#
68000pF ±20% GRM033B31C683ME84# D1
LLA
±10% GRM033B11E152KA01#
B
Part Number
LLM
1500pF
0.33mm 16Vdc
Tol.
LLR
±10% GRM033B11E102KA01#
Cap.
NFM
1000pF
Rated
TC
Voltage Code
KRM
T
max.
Part Number
KR3
B
Tol.
GMA
0.33mm 25Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 0.6×0.3mm)
10000pF ±10% GRM033R70J103KA01#
R
4700pF
±10% GRM033R10J472KA01#
Part number # indicates the package specification code.
54
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
GRM Series High Dielectric Constant Type Part Number List
0.10µF
±10% GRM155R71H104KE14#
R
2200pF
±10% GRM155R11H222KA01#
4700pF
±10% GRM155R11H472KA01#
10000pF ±10% GRM155R11H103KA88#
±20% GRM033C80J223ME01#
X5R
0.10µF
±10% GRM155R61H104KE14#
B
0.10µF
±10% GRM155B31H104KE14#
X6S
0.22µF
±10% GRM155C8YA224KE01#
±20% GRM155R61H104ME14#
±20% GRM033C80J333ME01#
47000pF ±10% GRM033C80J473KE19#
±20% GRM155B31H104ME14#
±20% GRM033C80J473ME19#
35Vdc
D1
25Vdc
X7R 22000pF ±10% GRM155R71E223KA61#
D1
0.22µF
±20% GRM033R60J224ME90#
B
4700pF
±10% GRM033B10J472KA01#
6800pF
±10% GRM033B10J682KA01#
±20% GRM155R71E104ME14#
X5R
1.0µF
±10% GRM155R61E105KA12# D1
B
1.0µF
±10% GRM155B31E105KA12# D1
X7R
0.22µF
±10% GRM155R71C224KA12#
X5R
1.0µF
±10% GRM155R61C105KA12#
±20% GRM155R61E105MA12# D1
±20% GRM155B31E105MA12# D1
15000pF ±10% GRM033B10J153KE01#
±20% GRM033B10J153ME01#
16Vdc
22000pF ±10% GRM033B10J223KE01#
±20% GRM033B10J223ME01#
±20% GRM155R61C105MA12#
33000pF ±10% GRM033B10J333KE01#
B
1.0µF
±10% GRM155B31C105KA12#
X7R
0.22µF
±10% GRM155R71A224KE01#
±20% GRM033B10J333ME01#
X6S
0.22µF
±20% GRM033C80G224ME90#
0.39mm 10Vdc
X5R
1.0µF
±20% GRM033R61A105ME15#
6.3Vdc
X7T
1.0µF
±20% GRM033D70J105ME01# D1
4Vdc
X7T
1.0µF
±20% GRM033D70G105ME01#
2.5Vdc
X7T
1.0µF
±20% GRM033D70E105ME15#
±10% GRM155R71E104KE14#
±20% GRM155B31C105MA12#
10Vdc
±20% GRM155R71A224ME01#
0.47µF
±10% GRM155R71A474KE01#
X6S
1.0µF
±10% GRM155C81A105KA12#
B
2.2µF
±10% GRM155B31A225KE95#
±20% GRM155R71A474ME01#
±20% GRM155C81A105MA12#
1.0×0.5mm
X5R
1.0µF
±20% GRM152R60J105ME15# D1
X6T
1.0µF
±20% GRM152D80G105ME15# D1
X5R
1.0µF
±20% GRM152R60G105ME15#
0.33mm 10Vdc
X5R
1.0µF
±20% GRM153R61A105ME95# D1
B
1.0µF
±20% GRM153B31A105ME95# D1
6.3Vdc
X6T
1.0µF
±20% GRM153D80J105ME95# D1
X5R
1.0µF
±20% GRM153R60J105ME95#
B
1.0µF
X6T
1.0µF
4Vdc
50Vdc
1.0µF
±10% GRM155R70J105KA12#
D1
±20% GRM155R70J105MA12# D1
X6S
2.2µF
±10% GRM155C80J225KE95#
D1
±20% GRM155C80J225ME95# D1
B
2.2µF
±10% GRM155B30J225KE95#
±20% GRM155B30J225ME95#
±10% GRM155R70G105KA12#
X7R
1.0µF
50Vdc
X5R
0.47µF
±20% GRM153B30J105ME95#
35Vdc
X5R
1.0µF
±10% GRM155R6YA105KE11#
D1
±20% GRM153D80G105ME95#
25Vdc
X6S
1.0µF
±10% GRM155C81E105KE11#
D1
16Vdc
X6S
1.0µF
6.3Vdc
X5R
4.7µF
±20% GRM155R60J475ME47# D1
B
4.7µF
±20% GRM155B30J475ME47#
X5R
4.7µF
±20% GRM155R60G475ME47#
B
4.7µF
±20% GRM155B30G475ME47#
±20% GRM155D80E475ME47# D1
220pF
±10% GRM155R72A221KA01#
±10% GRM155R72A471KA01#
1000pF
±10% GRM155R72A102KA01#
2200pF
±10% GRM155R72A222KA01#
4700pF
±10% GRM155R72A472KA01#
X7R 2200pF
±10% GRM155R71H222KA01#
4700pF
±10% GRM155R71H472KA01#
±20% GRM155R70G105MA12#
0.6mm
±10% GRM155R61H474KE11# D1
±20% GRM155C81E105ME11# D1
±10% GRM155C81C105KE11#
±20% GRM155C81C105ME11#
4Vdc
D1
10000pF ±10% GRM155R71H103KA88#
2.5Vdc
X6T
4.7µF
22000pF ±10% GRM155R71H223KA12#
0.65mm 25Vdc
X6T
2.2µF
±20% GRM155D81E225ME11# D1
47000pF ±10% GRM155R71H473KE14#
16Vdc
X7T
2.2µF
±20% GRM155D71C225ME11# D1
X6T
2.2µF
±20% GRM155D81C225ME11#
±20% GRM155R71H473ME14#
LLR
X7R
4Vdc
470pF
0.55mm 100Vdc X7R
6.3Vdc
Part Number
NFM
Tol.
KRM
4Vdc
Cap.
KR3
Rated
TC
Voltage Code
0.22mm 6.3Vdc
D1
±20% GRM155B31A225ME95# D1
GMA
T
max.
GA3
GB
X5R
0.10µF
GA3
GF
±20% GRM033C80J224ME90# D1
GA2
47000pF ±10% GRM155R71E473KA88#
±20% GRM033C80J104ME84# D1
0.22µF
D1
±20% GRM155C8YA224ME01# D1
±20% GRM033C80J683ME84# D1
4Vdc
GJM
33000pF ±10% GRM033C80J333KE01#
±10% GRM033C80J104KE84#
GR4
±20% GRM033C80J153ME01#
GRJ
±20% GRM155R71H104ME14#
22000pF ±10% GRM033C80J223KE01#
0.10µF
Part Number
X7R
10000pF ±10% GRM033R10J103KA01#
X6S 15000pF ±10% GRM033C80J153KE01#
68000pF ±10% GRM033C80J683KE84#
Tol.
GQM
0.55mm 50Vdc
Cap.
GA3
GD
±10% GRM033R10J682KA01#
Rated
TC
Voltage Code
LLL
6800pF
T
max.
Part Number
LLA
R
Tol.
Part number # indicates the package specification code.
GMD
0.33mm 6.3Vdc
Cap.
LLM
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 0.6×0.3mm)
55
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
GRM Series High Dielectric Constant Type Part Number List
±20% GRM188B31A106ME69# D1
50Vdc
X5R
2.2µF
±10% GRM188R61H225KE11#
35Vdc
X6S
2.2µF
X5R
4.7µF
1.0mm
±20% GRM155R61E225ME11#
X6S
2.2µF
±10% GRM155C81C225KE11#
X5R
2.2µF
±10% GRM155R61C225KE11#
±20% GRM188R61H225ME11#
±20% GRM155C81C225ME11#
±20% GRM188C8YA225ME11#
±20% GRM155R61C225ME11#
10Vdc
X7S
2.2µF
2.2µF
±10% GRM155C71A225KE11#
25Vdc
X7S
2.2µF
X7S
2.2µF
±10% GRM155C81A225KE11#
X6S
2.2µF
4.7µF
±20% GRM155R60J106ME05# D1
4Vdc
X5R
10µF
±20% GRM155R60G106ME01#
2.5Vdc
X5R
10µF
±20% GRM155R60E106ME16#
16Vdc
X5R
10µF
±20% GRM188R61E106MA73#
X7S
2.2µF
±10% GRM188C71C225KE11#
1.6×0.8mm
Cap.
6.3Vdc
10µF
4Vdc
0.55mm 16Vdc
10Vdc
X5R
Tol.
Part Number
±20% GRM188C81C106MA73#
10Vdc
X7T
10µF
±20% GRM188D71A106MA73#
6.3Vdc
X7T
10µF
±20% GRM188D70J106MA73#
X5R
22µF
±20% GRM188R60J226MEA0# D1
B
22µF
±20% GRM188B30J226MEA0# D1
±20% GRM188C80G226MEA0# D1
X5R
10µF
±20% GRM185R60G106ME15#
X6S
22µF
X5R
4.7µF
±10% GRM185R61C475KE11#
X5R
22µF
±20% GRM188R60G226MEA0#
±20% GRM185R61C475ME11#
B
22µF
±20% GRM188B30G226MEA0#
X6S
4.7µF
4Vdc
±10% GRM185C81A475KE11# D1
6.3Vdc
X7T
4.7µF
±20% GRM185D70J475ME11# D1
X6S
4.7µF
±20% GRM185C80J475ME11#
25Vdc
X5R
2.2µF
±10% GRM188R61E225KA12#
B
2.2µF
±10% GRM188B31E225KA12#
X6S
2.2µF
±20% GRM188R61E225MA12#
2.0×1.25mm
T
max.
Rated
TC
Voltage Code
0.95mm 35Vdc
X5R
Cap.
4.7µF
4.7µF
±10% GRM219R61E475KA73#
±20% GRM188C81C225MA12#
4Vdc
X5R
47µF
±20% GRM219R60G476ME44# D1
±10% GRM188R71A225KE15#
2.5Vdc
X6T
47µF
±20% GRM219D80E476ME44#
35Vdc
X6S
4.7µF
2.2µF
6.3Vdc
X5R
10µF
±20% GRM188R60J106ME47#
B
10µF
±20% GRM188B30J106ME47#
4Vdc
X5R
10µF
±20% GRM188R60G106ME47#
0.95mm 25Vdc
X5R
4.7µF
±10% GRM188R61E475KE11#
16Vdc
X6S
4.7µF
±20% GRM188R71A225ME15#
±20% GRM219R61E475MA73#
1.0mm
25Vdc
X7S
4.7µF
10Vdc
X7S
4.7µF
D1
X7S
4.7µF
X5R
22µF
1.35mm 16Vdc
±20% GRM219R61C226ME15# D1
X5R
10µF
±10% GRM21BR61C106KE15#
B
10µF
±10% GRM21BB31C106KE15#
X5R
4.7µF
±10% GRM21BR61H475KE51#
B
4.7µF
±10% GRM188R61C106KAAL#
±10% GRM219C71C475KE21#
±20% GRM21BR61C106ME15#
±10% GRM188B31C475KAAJ# D1
±20% GRM21BB31C106ME15#
1.4mm
50Vdc
±20% GRM21BR61H475ME51#
±10% GRM188C71A475KE11#
±20% GRM188C71A475ME11#
±10% GRM219C81E475KE21#
4.7µF
±20% GRM219C71C475ME21#
±10% GRM188R61C475KE11#
±20% GRM188B31C475MAAJ# D1
D1
±20% GRM219C81E475ME21# D1
16Vdc
±20% GRM188R61C106MAAL#
4.7µF
±10% GRM219C71E475KE21#
X6S
±20% GRM188C81C475ME11#
B
D1
±20% GRM219C71E475ME21# D1
±10% GRM188C81C475KE11#
±20% GRM188R61C475ME11#
±10% GRM219C8YA475KE21#
±20% GRM219C8YA475ME21# D1
±20% GRM188R61E475ME11#
10µF
±10% GRM219R6YA475KA73# D1
X5R
X7R
4.7µF
Part Number
25Vdc
±10% GRM188C81C225KA12#
10Vdc
X5R
Tol.
±20% GRM219R6YA475MA73# D1
±20% GRM188B31E225MA12#
16Vdc
10µF
±20% GRM185R60J106ME15# D1
±20% GRM185C81A475ME11# D1
0.9mm
±10% GRM188C71C475KE21#
X6S
LLA
0.5mm
Rated
TC
Voltage Code
D1
±20% GRM188C71C225ME11#
4.7µF
T
max.
±10% GRM188C81E475KE11#
±20% GRM188C81E475ME11# D1
±20% GRM155C70J225ME11#
10µF
±10% GRM188C81E225KE11#
±20% GRM188C81E225ME11#
±10% GRM155C70J225KE11#
X5R
±10% GRM188C71E225KE11#
±20% GRM188C71E225ME11#
±20% GRM155C81A225ME11#
6.3Vdc
±10% GRM188R6YA475KE15#
±20% GRM188R6YA475ME15#
±20% GRM155C71A225ME11#
X6S
±10% GRM188C8YA225KE11#
LLM
16Vdc
GR4
±20% GRM188R61A106MAAL#
GRJ
10µF
GJM
±10% GRM155R61E225KE11#
B
GQM
2.2µF
±10% GRM188R61A106KAAL#
GA2
X5R
10µF
GA3
GB
25Vdc
X5R
0.95mm 10Vdc
GA3
GD
±20% GRM155C80J475MEAA# D1
Part Number
GA3
GF
±20% GRM155R61A475MEAA# D1
4.7µF
Tol.
LLL
4.7µF
X6S
Cap.
LLR
X5R
6.3Vdc
Rated
TC
Voltage Code
NFM
±20% GRM155D71A225ME11#
T
max.
KRM
2.2µF
Part Number
KR3
0.7mm
X7T
Tol.
GMA
0.65mm 10Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 1.0×0.5mm)
±10% GRM21BB31H475KE51#
Part number # indicates the package specification code.
56
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
GRM Series High Dielectric Constant Type Part Number List
Rated
TC
Voltage Code
Cap.
25Vdc
X7R
10µF
10Vdc
X7R
22µF
±20% GRM31CR71A226ME15#
X5R
47µF
±20% GRM31CR61A476ME15#
X7R
22µF
±20% GRM31CR70J226ME19#
±10% GRM21BB31E106KA73#
X7U
47µF
±20% GRM31CE70J476ME15#
±20% GRM21BB31E106MA73#
X5R
47µF
±20% GRM31CR60J476ME19#
X7U
47µF
±20% GRM31CE70G476ME15#
1.9mm 100Vdc X7S
4.7µF
±10% GRM31CC72A475KE11#
±20% GRM31CR71E106MA12#
±20% GRM21BR71E225ME11#
X5R
10µF
±10% GRM21BR61E106KA73#
±20% GRM21BR61E106MA73#
B
16Vdc
X6S
10µF
10µF
6.3Vdc
±10% GRM21BC81C106KA73#
4Vdc
±20% GRM21BC81C106MA73#
GRJ
±10% GRM21BR71E225KE11#
D1
X7U
22µF
±20% GRM21BE70G226ME51#
1.45mm 100Vdc X7S
1.0µF
±10% GRM21BC72A105KE01#
50Vdc
X7T
10µF
±10% GRM31CD71H106KE11# D1
4.7µF
±10% GRM21BC71H475KE11#
35Vdc
X7T
10µF
±10% GRM31CD7YA106KE11#
±20% GRM21BC71H475ME11#
25Vdc
X6S
22µF
±20% GRM31CC81E226ME11#
±10% GRM21BC81H475KE11#
16Vdc
X7S
22µF
±20% GRM31CC71C226ME11#
X5R
47µF
±20% GRM31CR61C476ME44#
X6S
47µF
±20% GRM31CC81A476ME44#
35Vdc
X7S
4.7µF
±10% GRM21BC7YA475KE11#
10Vdc
±20% GRM21BC7YA475ME11#
X6S
10µF
X5R
10µF
X7S
4.7µF
±10% GRM21BC8YA106KE11#
D1
6.3Vdc
±20% GRM21BC8YA106ME11# D1
±10% GRM21BR6YA106KE43#
4Vdc
±10% GRM21BC71E475KE11#
±10% GRM21BC71E106KE11#
10µF
±10% GRM21BC81E106KE11#
16Vdc
22µF
±20% GRM21BR61E226ME44#
X7S
10µF
±10% GRM21BC71C106KE11#
6.3Vdc
1.8mm
GA2
±20% GRM31CD80G107MEA8#
X5R
100µF
±20% GRM31CR60G107MEA8#
220µF
±20% GRM31CR60G227ME11#
220µF
±20% GRM31CR60E227ME11#
X5R
3.2×2.5mm
Rated
TC
Voltage Code
Cap.
2.7mm 100Vdc X7S
10µF
Tol.
Part Number
±20% GRM21BC81C226ME44# D1
±20% GRM21BR61C226ME44#
X7T
22µF
±20% GRM21BD71A226ME44# D1
25Vdc
X7R
22µF
±20% GRM32ER71E226ME15#
X6S
22µF
±20% GRM21BC81A226ME44#
16Vdc
X7R
22µF
±20% GRM32ER71C226MEA8#
X5R
22µF
±20% GRM21BR61A226ME44#
X6S
47µF
±20% GRM32EC81C476ME15# D1
47µF
±20% GRM21BR61A476ME15# D1
X7R
47µF
±20% GRM32ER71A476ME15#
X7T
22µF
±20% GRM21BD70J226ME44#
47µF
±20% GRM21BR60J476ME01# D1
X6S
47µF
10Vdc
D1
47µF
±20% GRM21BC80G476ME15# D1
100µF
±20% GRM21BC80G107ME15# D1
47µF
±20% GRM21BR60G476ME01#
B
47µF
±20% GRM21BB30G476ME15#
X6S
100µF
±20% GRM21BC80E107ME15#
2.8mm
±20% GRM32ER61A107ME20# D1
X5R
100µF
6.3Vdc
X7R
47µF
X7U
100µF
±20% GRM32EE70J107ME15#
4Vdc
X7U
100µF
±20% GRM32EE70G107ME19#
6.3Vdc
X5R
220µF
±20% GRM32ER60J227ME05#
4Vdc
X5R
220µF
±20% GRM32ER60G227ME05#
±20% GRM21BR60J107ME15# D1
±20% GRM21BB30J476ME15#
±10% GRM32EC72A106KE05#
±20% GRM32EC72A106ME05#
X5R
±20% GRM32ER70J476ME20#
D1
4.5×3.2mm
T
max.
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
1.5mm 630Vdc X7R 68000pF ±10% GRM43QR72J683KW01#
Rated
TC
Voltage Code
50Vdc
±20% GRM31CE70G107MEA8# D1
100µF
22µF
3.2×1.6mm
0.95mm 16Vdc
100µF
X6T
22µF
X5R
T
max.
X7U
X6S
100µF
2.5Vdc
±20% GRM31CR60J107MEA8#
±20% GRM31CR60J227ME11# D1
X5R
B
4Vdc
2.5Vdc
T
max.
±20% GRM21BC71C106ME11#
10Vdc
100µF
220µF
D1
±20% GRM21BC81E106ME11# D1
X5R
±20% GRM31CD80J107MEA8# D1
D1
±20% GRM21BC71E106ME11# D1
X6S
±20% GRM31CR61A107MEA8# D1
100µF
X5R
±20% GRM21BC71E475ME11#
10µF
100µF
X6T
D1
±20% GRM21BR6YA106ME43# D1
25Vdc
X5R
GA3
GF
±20% GRM21BC81H475ME11#
LLL
4.7µF
LLA
X6S
LLM
X7S
LLR
50Vdc
±20% GRM31CC72A475ME11#
GMA
4Vdc
Cap.
Tol.
GR4
2.2µF
GJM
X7R
±10% GRM31CR71E106KA12#
GQM
25Vdc
1.8mm
GA3
GB
±20% GRM21BB31H475ME51#
Part Number
GA3
GD
4.7µF
Tol.
Part Number
NFM
B
T
max.
Part Number
KRM
50Vdc
Tol.
KR3
Cap.
500Vdc X7R
0.15µF
±10% GRM43QR72H154KW10#
250Vdc X7R
0.15µF
±10% GRM43QR72E154KW01#
X5R
22µF
±20% GRM319R61C226ME15# D1
B
22µF
±20% GRM319B31C226ME15# D1
X7R
4.7µF
±10% GRM31CR71H475KA12#
630Vdc X7R
0.10µF
±10% GRM43DR72J104KW01#
±20% GRM31CR71H475MA12#
500Vdc X7R
0.22µF
±10% GRM43DR72H224KW10#
2.0mm 1000Vdc X7R 33000pF ±10% GRM43DR73A333KW01#
47000pF ±10% GRM43DR73A473KW01#
Part number # indicates the package specification code.
GMD
1.4mm
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 2.0×1.25mm)
57
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM Series High Dielectric Constant Type Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
2.0mm 250Vdc X7R
Cap.
Tol.
Part Number
0.22µF
±10% GRM43DR72E224KW01#
0.33µF
±10% GRM43DR72E334KW01#
0.47µF
±10% GRM43DR72E474KW01#
GRJ
Rated
TC
Voltage Code
GR4
T
max.
GR3
(→ 4.5×3.2mm)
5.7×5.0mm
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
GJM
T
max.
±10% GRM55DR72D334KW01#
0.47µF
±10% GRM55DR72D474KW01#
0.68µF
±10% GRM55DR72D684KW01#
1.0µF
±10% GRM55DR72D105KW01#
GA2
GA3
GB
±10% GRM55DR72E105KW01#
0.33µF
GA3
GD
±10% GRM55DR72E684KW01#
1.0µF
GA3
GF
0.68µF
LLL
±10% GRM55DR72E334KW01#
±10% GRM55DR72E474KW01#
LLA
0.33µF
0.47µF
LLM
±10% GRM55DR72H474KW10#
LLR
±10% GRM55DR72H334KW10#
0.47µF
NFM
±10% GRM55DR72J224KW01#
0.33µF
KRM
0.22µF
KR3
200Vdc X7R
±10% GRM55DR72J154KW01#
GMA
250Vdc X7R
±10% GRM55DR73A104KW01#
0.15µF
GMD
500Vdc X7R
0.10µF
!Caution
/Notice
630Vdc X7R
GQM
2.0mm 1000Vdc X7R 68000pF ±10% GRM55DR73A683KW01#
Part number # indicates the package specification code.
58
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Effective Capacitance & High Ripple Current Chip Multilayer Ceramic Capacitors for General Purpose
GR3 Series
GR3
WEB
-20
-40
-60
-80
0
50
100
150
DC Bias (V)
200
300kHz
1
250
20°C
300kHz
10
100kHz
New Material GR3
Conventional Material GRM
0
1
2
3
4
Current (Arms)
5
6
7
LLA
This product has a noise reduction effect.
Since dielectric materials which enable a reduction of noise are used, this product is more effective for reducing
noise compared to the general purpose GRM series.
New Material GR3
Conventional Material GRM
NFM
70
60
50
KRM
Sound Pressure Level (dB)
80
LLR
90
GQM
GA3
GB
4.7Arms
30kHz
3
30kHz
100kHz
2.9Arms
GA3
GD
Temperature Rise (°C)
Cap. Change (%)
100
New Material GR3 (1µF/250V)
Conventional Material GRM (1µF/250V)
0
-100
In the case of a product with a capacitance of 1µF,
when the exothermic temperature reaches 20ºC at
frequency f=300kHz, the amount of resistance of a
product with conventional material is 2.9Arms;
however, the new material is 4.7Arms.
GA3
GF
20
Improved ripple resistance performance
compared to conventional products
(X7R characteristics).
LLL
About twice the capacitance can be secured
when DC200V is applied.
2
LLM
When a DC bias is applied, a capacitance
higher than conventional products
(X7R characteristics) can be acquired.
GA2
Features
GJM
GR4
GRJ
This is a general purpose high ripple resistance product excellent
in DC bias characteristics.
1
GRM
Mar.13,2020
40
3225(1210)
630V/0.047µF
4532(1812)
250V/0.33µF
5750(2220)
250V/0.33µF
in mm(inch)
Specifications
Size (mm)
2.0×1.25mm to 5.7×5.0mm
Rated Voltage
250Vdc to 630Vdc
Capacitance
10000pF to 1.0µF
Main Applications
For PFC (Power Factor Correction) Circuits of Power Supplies,
EMI Suppression and Smoothing Circuits
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
e
g
e
T
L
W
GMD
GMA
3216(1206)
630V/0.01µF
!Caution
/Notice
20
KR3
30
59
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
Rated
TC
Voltage Code
Cap.
2.7mm 250Vdc X7T
1.0µF
Tol.
GRM
Part Number
±10% GR355XD72E105KW05#
GRJ
T
max.
2.0×1.25mm
T
max.
Part Number List
GR3
GR3 Series High Dielectric Constant Type
C02E.pdf
Mar.13,2020
1.0mm 250Vdc X7T 10000pF ±10% GR321AD72E103KW01#
GR4
15000pF ±10% GR321AD72E153KW01#
1.45mm 250Vdc X7T 22000pF ±10% GR321BD72E223KW03#
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
GQM
T
max.
GJM
3.2×1.6mm
1.0mm 450Vdc X7T 10000pF ±10% GR331AD72W103KW01#
15000pF ±10% GR331AD72W153KW01#
GA2
250Vdc X7T 33000pF ±10% GR331AD72E333KW01#
1.25mm 630Vdc X7T 10000pF ±10% GR331BD72J103KW01#
450Vdc X7T 22000pF ±10% GR331BD72W223KW01#
GA3
GB
33000pF ±10% GR331BD72W333KW01#
250Vdc X7T 47000pF ±10% GR331BD72E473KW01#
GA3
GD
1.8mm 630Vdc X7T 15000pF ±10% GR331CD72J153KW03#
450Vdc X7T 47000pF ±10% GR331CD72W473KW03#
GA3
GF
250Vdc X7T 68000pF ±10% GR331CD72E683KW03#
3.2×2.5mm
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
LLL
T
max.
1.5mm 630Vdc X7T 22000pF ±10% GR332QD72J223KW01#
0.10µF
±10% GR332QD72E104KW01#
LLA
250Vdc X7T
2.0mm 630Vdc X7T 33000pF ±10% GR332DD72J333KW01#
47000pF ±10% GR332DD72J473KW01#
0.10µF
±10% GR332DD72W104KW01#
0.15µF
±10% GR332DD72E154KW01#
LLR
250Vdc X7T
LLM
450Vdc X7T 68000pF ±10% GR332DD72W683KW01#
T
max.
Rated
TC
Voltage Code
1.5mm 250Vdc X7T
Cap.
0.22µF
Tol.
NFM
4.5×3.2mm
Part Number
±10% GR343QD72E224KW01#
0.15µF
±10% GR343DD72W154KW01#
0.33µF
±10% GR343DD72E334KW01#
KR3
450Vdc X7T
250Vdc X7T
KRM
2.0mm 630Vdc X7T 68000pF ±10% GR343DD72J683KW01#
2.0mm 630Vdc X7T
450Vdc X7T
250Vdc X7T
2.7mm 630Vdc X7T
Cap.
Tol.
Part Number
0.10µF
±10% GR355DD72J104KW01#
0.15µF
±10% GR355DD72J154KW01#
0.22µF
±10% GR355DD72W224KW01#
0.33µF
±10% GR355DD72W334KW01#
0.47µF
±10% GR355DD72W474KW01#
0.47µF
±10% GR355DD72E474KW01#
0.68µF
±10% GR355DD72E684KW01#
0.22µF
±10% GR355XD72J224KW05#
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GMA
5.7×5.0mm
Part number # indicates the package specification code.
60
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
C02E.pdf
Mar.13,2020
GRM
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Soft Termination Chip Multilayer Ceramic Capacitors for General Purpose
GR3
WEB
Features
1
The resin external electrodes suppress cracks by board deflection.
Cracking of the ceramic element is suppressed by the resin of the external electrodes, which releases the stress.
Resin Electrodes Layer
oGeneral Purpose Product (GRM Series)
Occurrence of cracking on
edge of terminal electrode
Foundation Electrode Layer Ni/Sn Plated Layer
Resin electrodes relieve the stress
oResin External Electrode Type (GRJ Series)
Suppresses the occurrence of cracking caused by deflection stress at the time of board mounting, etc.
100
40
20
0
2
4
6
Deflection Amount (mm)
8
0
0
2
4
6
Deflection Amount (mm)
8
Due to the specification of the measuring instrument, measurements can be performed up to 8mm.
Ideal for consumer and industrial electronic equipment, etc. where there heat stress, vibration and
impact are applied.
GMA
3
Specifications
Size (mm)
Rated Voltage
Capacitance
Main Applications
0.6×0.3mm to 5.7×5.0mm
e
g
e
6.3Vdc to 1000Vdc
T
33000pF to 47µF
Consumer & Industrial Electronic Equipment
L
W
GMD
0
40
NFM
20
60
LLR
60
GRJ/5750 (in mm)/2220 (in inch)
GRM/5750 (in mm)/2220 (in inch)
80
KRM
80
KR3
GRJ/3225 (in mm)/1210 (in inch)
GRM/3225 (in mm)/1210 (in inch)
!Caution
/Notice
Residual Ratio (%)
100
Residual Ratio (%)
2
LLL
Note: Cracks may occur in the capacitor body if excessive stress beyond the "guaranteed range of board bending strength (*) " provided in
the specifications is applied. Capacitors with cracks in them may cause a drop in insulation resistance, which could lead to a short circuit.
(*) For details on the guaranteed range of board bending strength, check the "Detailed Specification Sheet" on the Product Details Page.
LLA
Separated foundation
electrode and resin electrode
LLM
Conductive resin layer relieves
the mechanical stress of the ceramic
GA3
GF
GA3
GD
GA3
GB
GA2
Ceramic
GQM
Internal Electrodes
GJM
GR4
Cracking caused by flexing stress after board mounting is minimized due to resin
external electrodes!
GRJ
GRJ Series
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
61
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number List
GR3
GRJ Series High Dielectric Constant Type
C02E.pdf
Mar.13,2020
2.0×1.25mm
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
X5R
10µF
±10% GRJ21BR61E106KE01#
1.5mm 100Vdc X7S
1.0µF
±10% GRJ21BC72A105KE11#
D1
GR4
1.45mm 25Vdc
GRJ
T
max.
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Rated
TC
Voltage Code
Cap.
1.9mm 100Vdc X7S
4.7µF
Tol.
Part Number
±10% GRJ31CC72A475KE01#
GQM
T
max.
GJM
3.2×1.6mm
±20% GRJ31CC72A475ME01#
±10% GRJ31CR71H475KE11#
X7R
4.7µF
Rated
TC
Voltage Code
Cap.
10Vdc
X7R
47µF
±20% GRJ32ER71A476ME11#
2.85mm 25Vdc
X7S
22µF
±10% GRJ32EC71E226KE11#
Rated
TC
Voltage Code
Cap.
GA2
50Vdc
2.8mm
Tol.
Part Number
GA3
GD
T
max.
GA3
GB
3.2×2.5mm
T
max.
GA3
GF
4.5×3.2mm
Tol.
Part Number
250Vdc X7R
0.15µF
LLL
1.5mm 630Vdc X7R 68000pF ±10% GRJ43QR72J683KWJ1#
±10% GRJ43QR72E154KWJ1#
LLA
2.0mm 1000Vdc X7R 33000pF ±10% GRJ43DR73A333KWJ1#
47000pF ±10% GRJ43DR73A473KWJ1#
0.22µF
±10% GRJ43DR72E224KWJ1#
0.33µF
±10% GRJ43DR72E334KWJ1#
0.47µF
±10% GRJ43DR72E474KWJ1#
LLR
0.10µF
250Vdc X7R
LLM
±10% GRJ43DR72J104KWJ1#
630Vdc X7R
T
max.
Rated
TC
Voltage Code
Cap.
Tol.
NFM
5.7×5.0mm
Part Number
2.0mm 1000Vdc X7R 68000pF ±10% GRJ55DR73A683KWJ1#
0.33µF
±10% GRJ55DR72E334KWJ1#
0.47µF
±10% GRJ55DR72E474KWJ1#
0.68µF
±10% GRJ55DR72E684KWJ1#
1.0µF
±10% GRJ55DR72E105KWJ1#
KRM
KR3
±10% GRJ55DR72J224KWJ1#
GMA
±10% GRJ55DR72J154KWJ1#
0.22µF
GMD
250Vdc X7R
±10% GRJ55DR73A104KWJ1#
0.15µF
!Caution
/Notice
0.10µF
630Vdc X7R
Part number # indicates the package specification code.
62
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Chip Multilayer Ceramic Capacitors for Information Devices Only
GR3
WEB
GR4
Size (L*W) : 4.5x2.0mm - 5.7x5.0mm / X7R Char. / DC2kV
Realized large capacity and small size while maintaining high withstand voltages
by the multilayer structure.
GRJ
GR4 Series
C02E.pdf
Mar.13,2020
GRM
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For information devices of Ethernet LAN (IEEE802.3.) and primary - secondary couplings of
DC-DC converters.
ex) DC-DC Converter
ex) LAN Connecter
GA2
Realized large capacity and small size while maintaining high withstand voltages by the multilayer
structure.
LLA
2
LLL
GA3
GF
GA3
GD
GA3
GB
LAN cable
board
Trans module
GQM
1
GJM
Features
Internal Electrodes
LLM
Ceramic
Ni/Sn Plated Layer
LLR
Foundation Electrode Layer
Capacitance
Main Applications
e
g
e
2000Vdc
T
100pF to 10000pF
For Ethernet LAN, Primary-secondary coupling for DC-DC converters
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
L
W
KR3
Rated Voltage
4.5×2.0mm to 5.7×5.0mm
GMA
Size (mm)
GMD
Specifications
KRM
NFM
Dedicated for reflow soldering.
!Caution
/Notice
3
63
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GR3
GR4 Series Temperature Compensating Type Part Number List
Tol.
Part Number
1.0mm 630Vdc U2J 1000pF
±5%
GR431A7U2J102JWC2#
1500pF
±5%
GR431A7U2J152JWC2#
2200pF
±5%
GR431A7U2J222JWC2#
1.25mm 630Vdc U2J 3300pF
±5%
GR431B7U2J332JWC2#
1.8mm 630Vdc U2J 4700pF
±5%
GR431C7U2J472JWC1#
Tol.
Part Number
GR4
Cap.
GJM
Rated
TC
Voltage Code
GRJ
3.2×1.6mm
T
max.
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GA2
GA3
GB
GA3
GD
GA3
GF
LLL
LLA
GR432E7U2J153JWC1#
LLM
±5%
LLR
GR432D7U2J103JWC2#
2.7mm 630Vdc U2J 15000pF
NFM
GR432Q7U2J682JWC2#
KRM
±5%
±5%
KR3
1.5mm 630Vdc U2J 6800pF
2.0mm 630Vdc U2J 10000pF
GMA
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GQM
3.2×2.5mm
Part number # indicates the package specification code.
64
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GR3
GR4 Series High Dielectric Constant Type Part Number List
4.5×2.0mm
150pF
±10% GR442QR73D151KW01#
180pF
±10% GR442QR73D181KW01#
220pF
±10% GR442QR73D221KW01#
270pF
±10% GR442QR73D271KW01#
330pF
±10% GR442QR73D331KW01#
390pF
±10% GR442QR73D391KW01#
470pF
±10% GR442QR73D471KW01#
560pF
±10% GR442QR73D561KW01#
680pF
±10% GR442QR73D681KW01#
820pF
±10% GR442QR73D821KW01#
1000pF
±10% GR442QR73D102KW01#
1200pF
±10% GR442QR73D122KW01#
1500pF
±10% GR442QR73D152KW01#
GR4
±10% GR442QR73D101KW01#
±10% GR442QR73D121KW01#
GJM
100pF
120pF
GRJ
Part Number
GQM
Tol.
GA2
1.5mm 2000Vdc X7R
Cap.
GA3
GB
Rated
TC
Voltage Code
GA3
GD
T
max.
4.5×3.2mm
Tol.
Part Number
1.5mm 2000Vdc X7R 1800pF
±10% GR443QR73D182KW01#
2200pF
±10% GR443QR73D222KW01#
2700pF
±10% GR443QR73D272KW01#
3300pF
±10% GR443QR73D332KW01#
3900pF
±10% GR443QR73D392KW01#
2.0mm 2000Vdc X7R 4700pF
±10% GR443DR73D472KW01#
GA3
GF
Cap.
LLL
Rated
TC
Voltage Code
LLA
T
max.
Cap.
Tol.
Part Number
LLR
Rated
TC
Voltage Code
LLM
5.7×5.0mm
T
max.
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Caution
/Notice
GMD
GMA
KR3
KRM
NFM
2.0mm 2000Vdc X7R 10000pF ±10% GR455DR73D103KW01#
Part number # indicates the package specification code.
65
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
C02E.pdf
Mar.13,2020
GRM
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Q Chip Multilayer Ceramic Capacitors for General Purpose
GR3
WEB
1
Mainly ideal for mobile communication devices and temperature compensation of related modules.
This product is ideal for temperature compensation of high frequency circuits, such as resonant circuits,
tuning circuits, and impedance matching circuits where the operating characteristics of the device are greatly
affected by the capacitance fluctuation.
Ceramic
GQM
Features
GJM
GR4
This product improves the high frequency characteristics and contributes to a
reduction of power consumption by the High Q and low ESR.
GRJ
GJM Series
GA2
Internal Electrodes (Cu)
Ni/Sn Plated Layer
High Q and low ESR were achieved at a high frequency by adopting ceramic material as the dielectric material
which enables an extremely low loss at high frequency, and base metal electrodes as the internal electrodes.
10000
New Material GJM
Conventional Material GRM
1005 (in mm)/0402 (in inch)/4.7pF/50V
100
LLA
1
0.1
New Material GJM
Conventional Material GRM
1005 (in mm)/0402 (in inch)/4.7pF/50V
1000
10
Q
Resistance (Ω)
100
10
0
3000
6000
Frequency (MHz)
9000
1
0
500 1000 1500 2000 2500 3000 3500 4000
Frequency (MHz)
LLR
GA3
GF
High Q and low ESR in VHF, UHF and microwave frequency bands.
LLM
2
LLL
GA3
GD
GA3
GB
Foundation Electrode Layer
Narrow Capacitance Tolerance
(Capacitance Tolerance Symbol)
±0.05pF (W)
1.0 to 5.0pF
±0.25pF (C)
±0.05pF (W), ±0.1pF (B)
5.1 to 9.9pF
±0.5pF (D)
±0.05pF (W), ±0.1pF (B), ±0.25pF (C)
10pF to
±5% (J)
±2% (G)
Size (mm)
Rated Voltage
Capacitance
Main Applications
GMA
Specifications
0.4×0.2mm to 1.0×0.5mm
e
g
e
6.3Vdc to 100Vdc
T
0.10pF to 47pF
Small communication devices, such as mobile phones
and high frequency communication modules
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
L
W
GMD
to 0.9pF
Standard Capacitance Tolerance
(Capacitance Tolerance Symbol)
±0.1pF (B)
KRM
Capacitance Range
KR3
In addition to standard tolerance, the allowable range of this product is also suitable for the following tight tolerance.
NFM
Can be used for tight tolerance.
!Caution
/Notice
3
66
5.7pF
±0.5pF GJM0225C1E5R7DB01#
0.40pF
±0.1pF GJM0225C1ER40BB01#
5.8pF
±0.5pF GJM0225C1E5R8DB01#
0.50pF
±0.1pF GJM0225C1ER50BB01#
5.9pF
±0.5pF GJM0225C1E5R9DB01#
0.60pF
±0.1pF GJM0225C1ER60BB01#
6.0pF
±0.5pF GJM0225C1E6R0DB01#
0.70pF
±0.1pF GJM0225C1ER70BB01#
6.1pF
±0.5pF GJM0225C1E6R1DB01#
0.80pF
±0.1pF GJM0225C1ER80BB01#
6.2pF
±0.5pF GJM0225C1E6R2DB01#
0.90pF
±0.1pF GJM0225C1ER90BB01#
6.3pF
±0.5pF GJM0225C1E6R3DB01#
1.0pF
±0.25pF GJM0225C1E1R0CB01#
6.4pF
±0.5pF GJM0225C1E6R4DB01#
1.1pF
±0.25pF GJM0225C1E1R1CB01#
6.5pF
±0.5pF GJM0225C1E6R5DB01#
1.2pF
±0.25pF GJM0225C1E1R2CB01#
6.6pF
±0.5pF GJM0225C1E6R6DB01#
1.3pF
±0.25pF GJM0225C1E1R3CB01#
6.7pF
±0.5pF GJM0225C1E6R7DB01#
1.4pF
±0.25pF GJM0225C1E1R4CB01#
6.8pF
±0.5pF GJM0225C1E6R8DB01#
1.5pF
±0.25pF GJM0225C1E1R5CB01#
6.9pF
±0.5pF GJM0225C1E6R9DB01#
1.6pF
±0.25pF GJM0225C1E1R6CB01#
7.0pF
±0.5pF GJM0225C1E7R0DB01#
1.7pF
±0.25pF GJM0225C1E1R7CB01#
7.1pF
±0.5pF GJM0225C1E7R1DB01#
1.8pF
±0.25pF GJM0225C1E1R8CB01#
7.2pF
±0.5pF GJM0225C1E7R2DB01#
1.9pF
±0.25pF GJM0225C1E1R9CB01#
7.3pF
±0.5pF GJM0225C1E7R3DB01#
2.0pF
±0.25pF GJM0225C1E2R0CB01#
7.4pF
±0.5pF GJM0225C1E7R4DB01#
2.1pF
±0.25pF GJM0225C1E2R1CB01#
7.5pF
±0.5pF GJM0225C1E7R5DB01#
2.2pF
±0.25pF GJM0225C1E2R2CB01#
7.6pF
±0.5pF GJM0225C1E7R6DB01#
2.3pF
±0.25pF GJM0225C1E2R3CB01#
7.7pF
±0.5pF GJM0225C1E7R7DB01#
2.4pF
±0.25pF GJM0225C1E2R4CB01#
7.8pF
±0.5pF GJM0225C1E7R8DB01#
2.5pF
±0.25pF GJM0225C1E2R5CB01#
7.9pF
±0.5pF GJM0225C1E7R9DB01#
2.6pF
±0.25pF GJM0225C1E2R6CB01#
8.0pF
±0.5pF GJM0225C1E8R0DB01#
2.7pF
±0.25pF GJM0225C1E2R7CB01#
8.1pF
±0.5pF GJM0225C1E8R1DB01#
2.8pF
±0.25pF GJM0225C1E2R8CB01#
8.2pF
±0.5pF GJM0225C1E8R2DB01#
2.9pF
±0.25pF GJM0225C1E2R9CB01#
8.3pF
±0.5pF GJM0225C1E8R3DB01#
3.0pF
±0.25pF GJM0225C1E3R0CB01#
8.4pF
±0.5pF GJM0225C1E8R4DB01#
3.1pF
±0.25pF GJM0225C1E3R1CB01#
8.5pF
±0.5pF GJM0225C1E8R5DB01#
3.2pF
±0.25pF GJM0225C1E3R2CB01#
8.6pF
±0.5pF GJM0225C1E8R6DB01#
3.3pF
±0.25pF GJM0225C1E3R3CB01#
8.7pF
±0.5pF GJM0225C1E8R7DB01#
3.4pF
±0.25pF GJM0225C1E3R4CB01#
8.8pF
±0.5pF GJM0225C1E8R8DB01#
3.5pF
±0.25pF GJM0225C1E3R5CB01#
8.9pF
±0.5pF GJM0225C1E8R9DB01#
3.6pF
±0.25pF GJM0225C1E3R6CB01#
9.0pF
±0.5pF GJM0225C1E9R0DB01#
3.7pF
±0.25pF GJM0225C1E3R7CB01#
9.1pF
±0.5pF GJM0225C1E9R1DB01#
3.8pF
±0.25pF GJM0225C1E3R8CB01#
9.2pF
±0.5pF GJM0225C1E9R2DB01#
3.9pF
±0.25pF GJM0225C1E3R9CB01#
9.3pF
±0.5pF GJM0225C1E9R3DB01#
4.0pF
±0.25pF GJM0225C1E4R0CB01#
9.4pF
±0.5pF GJM0225C1E9R4DB01#
4.1pF
±0.25pF GJM0225C1E4R1CB01#
9.5pF
±0.5pF GJM0225C1E9R5DB01#
4.2pF
±0.25pF GJM0225C1E4R2CB01#
9.6pF
±0.5pF GJM0225C1E9R6DB01#
4.3pF
±0.25pF GJM0225C1E4R3CB01#
9.7pF
±0.5pF GJM0225C1E9R7DB01#
4.4pF
±0.25pF GJM0225C1E4R4CB01#
9.8pF
±0.5pF GJM0225C1E9R8DB01#
4.5pF
±0.25pF GJM0225C1E4R5CB01#
9.9pF
±0.5pF GJM0225C1E9R9DB01#
4.6pF
±0.25pF GJM0225C1E4R6CB01#
10pF
±5%
GJM0225C1E100JB01#
4.7pF
±0.25pF GJM0225C1E4R7CB01#
11pF
±5%
GJM0225C1E110JB01#
4.8pF
±0.25pF GJM0225C1E4R8CB01#
12pF
±5%
GJM0225C1E120JB01#
4.9pF
±0.25pF GJM0225C1E4R9CB01#
13pF
±5%
GJM0225C1E130JB01#
5.0pF
±0.25pF GJM0225C1E5R0CB01#
15pF
±5%
GJM0225C1E150JB01#
5.1pF
±0.5pF GJM0225C1E5R1DB01#
16pF
±5%
GJM0225C1E160JB01#
5.2pF
±0.5pF GJM0225C1E5R2DB01#
18pF
±5%
GJM0225C1E180JB01#
5.3pF
±0.5pF GJM0225C1E5R3DB01#
20pF
±5%
GJM0225C1E200JB01#
Part number # indicates the package specification code.
GRM
GR3
GRJ
±0.1pF GJM0225C1ER30BB01#
GR4
±0.5pF GJM0225C1E5R6DB01#
0.30pF
GJM
5.6pF
GQM
±0.5pF GJM0225C1E5R5DB01#
±0.1pF GJM0225C1ER20BB01#
GA2
5.5pF
0.20pF
GA3
GB
±0.5pF GJM0225C1E5R4DB01#
GA3
GD
5.4pF
GA3
GF
C0G
LLL
0.22mm 25Vdc
LLA
Part Number
LLM
C0G
Tol.
Part Number
LLR
0.22mm 25Vdc
Cap.
Tol.
NFM
Rated
TC
Voltage Code
Cap.
KRM
T
max.
Rated
TC
Voltage Code
KR3
T
max.
0.4×0.2mm
Part Number List
GMA
GJM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
GMD
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
/Notice
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
67
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
CH
±0.5pF GJM0222C1E5R8DB01#
0.50pF
±0.1pF GJM0224C1ER50BB01#
5.9pF
±0.5pF GJM0222C1E5R9DB01#
0.60pF
±0.1pF GJM0224C1ER60BB01#
6.0pF
±0.5pF GJM0222C1E6R0DB01#
0.70pF
±0.1pF GJM0224C1ER70BB01#
6.1pF
±0.5pF GJM0222C1E6R1DB01#
0.80pF
±0.1pF GJM0224C1ER80BB01#
6.2pF
±0.5pF GJM0222C1E6R2DB01#
0.90pF
±0.1pF GJM0224C1ER90BB01#
6.3pF
±0.5pF GJM0222C1E6R3DB01#
1.0pF
±0.25pF GJM0224C1E1R0CB01#
6.4pF
±0.5pF GJM0222C1E6R4DB01#
1.1pF
±0.25pF GJM0224C1E1R1CB01#
6.5pF
±0.5pF GJM0222C1E6R5DB01#
1.2pF
±0.25pF GJM0224C1E1R2CB01#
6.6pF
±0.5pF GJM0222C1E6R6DB01#
1.3pF
±0.25pF GJM0224C1E1R3CB01#
6.7pF
±0.5pF GJM0222C1E6R7DB01#
1.4pF
±0.25pF GJM0224C1E1R4CB01#
6.8pF
±0.5pF GJM0222C1E6R8DB01#
1.5pF
±0.25pF GJM0224C1E1R5CB01#
6.9pF
±0.5pF GJM0222C1E6R9DB01#
1.6pF
±0.25pF GJM0224C1E1R6CB01#
7.0pF
±0.5pF GJM0222C1E7R0DB01#
1.7pF
±0.25pF GJM0224C1E1R7CB01#
7.1pF
±0.5pF GJM0222C1E7R1DB01#
1.8pF
±0.25pF GJM0224C1E1R8CB01#
7.2pF
±0.5pF GJM0222C1E7R2DB01#
1.9pF
±0.25pF GJM0224C1E1R9CB01#
7.3pF
±0.5pF GJM0222C1E7R3DB01#
2.0pF
±0.25pF GJM0224C1E2R0CB01#
7.4pF
±0.5pF GJM0222C1E7R4DB01#
2.1pF
±0.25pF GJM0223C1E2R1CB01#
7.5pF
±0.5pF GJM0222C1E7R5DB01#
2.2pF
±0.25pF GJM0223C1E2R2CB01#
7.6pF
±0.5pF GJM0222C1E7R6DB01#
2.3pF
±0.25pF GJM0223C1E2R3CB01#
7.7pF
±0.5pF GJM0222C1E7R7DB01#
2.4pF
±0.25pF GJM0223C1E2R4CB01#
7.8pF
±0.5pF GJM0222C1E7R8DB01#
2.5pF
±0.25pF GJM0223C1E2R5CB01#
7.9pF
±0.5pF GJM0222C1E7R9DB01#
2.6pF
±0.25pF GJM0223C1E2R6CB01#
8.0pF
±0.5pF GJM0222C1E8R0DB01#
2.7pF
±0.25pF GJM0223C1E2R7CB01#
8.1pF
±0.5pF GJM0222C1E8R1DB01#
2.8pF
±0.25pF GJM0223C1E2R8CB01#
8.2pF
±0.5pF GJM0222C1E8R2DB01#
2.9pF
±0.25pF GJM0223C1E2R9CB01#
8.3pF
±0.5pF GJM0222C1E8R3DB01#
3.0pF
±0.25pF GJM0223C1E3R0CB01#
8.4pF
±0.5pF GJM0222C1E8R4DB01#
3.1pF
±0.25pF GJM0223C1E3R1CB01#
8.5pF
±0.5pF GJM0222C1E8R5DB01#
3.2pF
±0.25pF GJM0223C1E3R2CB01#
8.6pF
±0.5pF GJM0222C1E8R6DB01#
3.3pF
±0.25pF GJM0223C1E3R3CB01#
8.7pF
±0.5pF GJM0222C1E8R7DB01#
3.4pF
±0.25pF GJM0223C1E3R4CB01#
8.8pF
±0.5pF GJM0222C1E8R8DB01#
3.5pF
±0.25pF GJM0223C1E3R5CB01#
8.9pF
±0.5pF GJM0222C1E8R9DB01#
3.6pF
±0.25pF GJM0223C1E3R6CB01#
9.0pF
±0.5pF GJM0222C1E9R0DB01#
3.7pF
±0.25pF GJM0223C1E3R7CB01#
9.1pF
±0.5pF GJM0222C1E9R1DB01#
3.8pF
±0.25pF GJM0223C1E3R8CB01#
9.2pF
±0.5pF GJM0222C1E9R2DB01#
3.9pF
±0.25pF GJM0223C1E3R9CB01#
9.3pF
±0.5pF GJM0222C1E9R3DB01#
4.0pF
±0.25pF GJM0222C1E4R0CB01#
9.4pF
±0.5pF GJM0222C1E9R4DB01#
4.1pF
±0.25pF GJM0222C1E4R1CB01#
9.5pF
±0.5pF GJM0222C1E9R5DB01#
4.2pF
±0.25pF GJM0222C1E4R2CB01#
9.6pF
±0.5pF GJM0222C1E9R6DB01#
4.3pF
±0.25pF GJM0222C1E4R3CB01#
9.7pF
±0.5pF GJM0222C1E9R7DB01#
4.4pF
±0.25pF GJM0222C1E4R4CB01#
9.8pF
±0.5pF GJM0222C1E9R8DB01#
4.5pF
±0.25pF GJM0222C1E4R5CB01#
9.9pF
±0.5pF GJM0222C1E9R9DB01#
4.6pF
±0.25pF GJM0222C1E4R6CB01#
10pF
±5%
GJM0222C1E100JB01#
4.7pF
±0.25pF GJM0222C1E4R7CB01#
11pF
±5%
GJM0222C1E110JB01#
4.8pF
±0.25pF GJM0222C1E4R8CB01#
12pF
±5%
GJM0222C1E120JB01#
4.9pF
±0.25pF GJM0222C1E4R9CB01#
13pF
±5%
GJM0222C1E130JB01#
5.0pF
±0.25pF GJM0222C1E5R0CB01#
15pF
±5%
GJM0222C1E150JB01#
5.1pF
±0.5pF GJM0222C1E5R1DB01#
16pF
±5%
GJM0222C1E160JB01#
5.2pF
±0.5pF GJM0222C1E5R2DB01#
18pF
±5%
GJM0222C1E180JB01#
5.3pF
±0.5pF GJM0222C1E5R3DB01#
20pF
±5%
GJM0222C1E200JB01#
5.4pF
±0.5pF GJM0222C1E5R4DB01#
22pF
±5%
GJM0222C1E220JB01#
Part number # indicates the package specification code.
GRJ
5.8pF
GR4
±0.1pF GJM0224C1ER40BB01#
GJM
±0.5pF GJM0222C1E5R7DB01#
0.40pF
GQM
±0.5pF GJM0222C1E5R6DB01#
5.7pF
GA2
5.6pF
±0.1pF GJM0224C1ER30BB01#
GA3
GB
±0.1pF GJM0224C1ER20BB01#
GA3
GD
±0.5pF GJM0222C1E5R5DB01#
CH
GA3
GF
CJ
5.5pF
0.22mm 25Vdc
LLL
0.30pF
Part Number
LLA
0.20pF
Tol.
LLM
CK
GJM0225C1E220JB01#
Cap.
LLR
±5%
Rated
TC
Voltage Code
NFM
22pF
T
max.
KRM
C0G
Part Number
KR3
Tol.
GMA
0.22mm 25Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 0.4×0.2mm)
68
±0.5pF GJM0335C2A5R8DB01#
0.50pF
±0.1pF GJM0335C2AR50BB01#
5.9pF
±0.5pF GJM0335C2A5R9DB01#
0.60pF
±0.1pF GJM0335C2AR60BB01#
6.0pF
±0.5pF GJM0335C2A6R0DB01#
0.70pF
±0.1pF GJM0335C2AR70BB01#
6.1pF
±0.5pF GJM0335C2A6R1DB01#
0.80pF
±0.1pF GJM0335C2AR80BB01#
6.2pF
±0.5pF GJM0335C2A6R2DB01#
0.90pF
±0.1pF GJM0335C2AR90BB01#
6.3pF
±0.5pF GJM0335C2A6R3DB01#
1.0pF
±0.25pF GJM0335C2A1R0CB01#
6.4pF
±0.5pF GJM0335C2A6R4DB01#
1.1pF
±0.25pF GJM0335C2A1R1CB01#
6.5pF
±0.5pF GJM0335C2A6R5DB01#
1.2pF
±0.25pF GJM0335C2A1R2CB01#
6.6pF
±0.5pF GJM0335C2A6R6DB01#
1.3pF
±0.25pF GJM0335C2A1R3CB01#
6.7pF
±0.5pF GJM0335C2A6R7DB01#
1.4pF
±0.25pF GJM0335C2A1R4CB01#
6.8pF
±0.5pF GJM0335C2A6R8DB01#
1.5pF
±0.25pF GJM0335C2A1R5CB01#
6.9pF
±0.5pF GJM0335C2A6R9DB01#
1.6pF
±0.25pF GJM0335C2A1R6CB01#
7.0pF
±0.5pF GJM0335C2A7R0DB01#
1.7pF
±0.25pF GJM0335C2A1R7CB01#
7.1pF
±0.5pF GJM0335C2A7R1DB01#
1.8pF
±0.25pF GJM0335C2A1R8CB01#
7.2pF
±0.5pF GJM0335C2A7R2DB01#
1.9pF
±0.25pF GJM0335C2A1R9CB01#
7.3pF
±0.5pF GJM0335C2A7R3DB01#
2.0pF
±0.25pF GJM0335C2A2R0CB01#
7.4pF
±0.5pF GJM0335C2A7R4DB01#
2.1pF
±0.25pF GJM0335C2A2R1CB01#
7.5pF
±0.5pF GJM0335C2A7R5DB01#
2.2pF
±0.25pF GJM0335C2A2R2CB01#
7.6pF
±0.5pF GJM0335C2A7R6DB01#
2.3pF
±0.25pF GJM0335C2A2R3CB01#
7.7pF
±0.5pF GJM0335C2A7R7DB01#
2.4pF
±0.25pF GJM0335C2A2R4CB01#
7.8pF
±0.5pF GJM0335C2A7R8DB01#
2.5pF
±0.25pF GJM0335C2A2R5CB01#
7.9pF
±0.5pF GJM0335C2A7R9DB01#
2.6pF
±0.25pF GJM0335C2A2R6CB01#
8.0pF
±0.5pF GJM0335C2A8R0DB01#
2.7pF
±0.25pF GJM0335C2A2R7CB01#
8.1pF
±0.5pF GJM0335C2A8R1DB01#
2.8pF
±0.25pF GJM0335C2A2R8CB01#
8.2pF
±0.5pF GJM0335C2A8R2DB01#
2.9pF
±0.25pF GJM0335C2A2R9CB01#
8.3pF
±0.5pF GJM0335C2A8R3DB01#
3.0pF
±0.25pF GJM0335C2A3R0CB01#
8.4pF
±0.5pF GJM0335C2A8R4DB01#
3.1pF
±0.25pF GJM0335C2A3R1CB01#
8.5pF
±0.5pF GJM0335C2A8R5DB01#
3.2pF
±0.25pF GJM0335C2A3R2CB01#
8.6pF
±0.5pF GJM0335C2A8R6DB01#
3.3pF
±0.25pF GJM0335C2A3R3CB01#
8.7pF
±0.5pF GJM0335C2A8R7DB01#
3.4pF
±0.25pF GJM0335C2A3R4CB01#
8.8pF
±0.5pF GJM0335C2A8R8DB01#
3.5pF
±0.25pF GJM0335C2A3R5CB01#
8.9pF
±0.5pF GJM0335C2A8R9DB01#
3.6pF
±0.25pF GJM0335C2A3R6CB01#
9.0pF
±0.5pF GJM0335C2A9R0DB01#
3.7pF
±0.25pF GJM0335C2A3R7CB01#
9.1pF
±0.5pF GJM0335C2A9R1DB01#
3.8pF
±0.25pF GJM0335C2A3R8CB01#
9.2pF
±0.5pF GJM0335C2A9R2DB01#
3.9pF
±0.25pF GJM0335C2A3R9CB01#
9.3pF
±0.5pF GJM0335C2A9R3DB01#
4.0pF
±0.25pF GJM0335C2A4R0CB01#
9.4pF
±0.5pF GJM0335C2A9R4DB01#
4.1pF
±0.25pF GJM0335C2A4R1CB01#
9.5pF
±0.5pF GJM0335C2A9R5DB01#
4.2pF
±0.25pF GJM0335C2A4R2CB01#
9.6pF
±0.5pF GJM0335C2A9R6DB01#
4.3pF
±0.25pF GJM0335C2A4R3CB01#
9.7pF
±0.5pF GJM0335C2A9R7DB01#
4.4pF
±0.25pF GJM0335C2A4R4CB01#
9.8pF
±0.5pF GJM0335C2A9R8DB01#
4.5pF
±0.25pF GJM0335C2A4R5CB01#
9.9pF
±0.5pF GJM0335C2A9R9DB01#
4.6pF
±0.25pF GJM0335C2A4R6CB01#
10pF
±5%
GJM0335C2A100JB01#
4.7pF
±0.25pF GJM0335C2A4R7CB01#
11pF
±5%
GJM0335C2A110JB01#
4.8pF
±0.25pF GJM0335C2A4R8CB01#
12pF
±5%
GJM0335C2A120JB01#
4.9pF
±0.25pF GJM0335C2A4R9CB01#
13pF
±5%
GJM0335C2A130JB01#
5.0pF
±0.25pF GJM0335C2A5R0CB01#
15pF
±5%
GJM0335C2A150JB01#
5.1pF
±0.5pF GJM0335C2A5R1DB01#
5.2pF
5.3pF
5.4pF
0.30pF
±0.1pF GJM0334C2AR30BB01#
±0.5pF GJM0335C2A5R2DB01#
0.40pF
±0.1pF GJM0334C2AR40BB01#
±0.5pF GJM0335C2A5R3DB01#
0.50pF
±0.1pF GJM0334C2AR50BB01#
±0.5pF GJM0335C2A5R4DB01#
0.60pF
±0.1pF GJM0334C2AR60BB01#
CK
Part number # indicates the package specification code.
GRM
GR3
GRJ
5.8pF
GR4
±0.1pF GJM0335C2AR40BB01#
GJM
±0.5pF GJM0335C2A5R7DB01#
0.40pF
GQM
5.7pF
GA2
±0.5pF GJM0335C2A5R6DB01#
±0.1pF GJM0335C2AR30BB01#
GA3
GB
5.6pF
0.30pF
GA3
GD
±0.5pF GJM0335C2A5R5DB01#
GA3
GF
5.5pF
LLL
0.33mm 100Vdc C0G
LLA
Part Number
LLM
Tol.
Part Number
LLR
0.33mm 100Vdc C0G
Cap.
Tol.
NFM
Rated
TC
Voltage Code
Cap.
KRM
T
max.
Rated
TC
Voltage Code
KR3
T
max.
0.6×0.3mm
Part Number List
GMA
GJM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
GMD
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
/Notice
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
69
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
±0.5pF GJM0332C2A6R4DB01#
1.1pF
±0.25pF GJM0334C2A1R1CB01#
6.5pF
±0.5pF GJM0332C2A6R5DB01#
1.2pF
±0.25pF GJM0334C2A1R2CB01#
6.6pF
±0.5pF GJM0332C2A6R6DB01#
1.3pF
±0.25pF GJM0334C2A1R3CB01#
6.7pF
±0.5pF GJM0332C2A6R7DB01#
1.4pF
±0.25pF GJM0334C2A1R4CB01#
6.8pF
±0.5pF GJM0332C2A6R8DB01#
1.5pF
±0.25pF GJM0334C2A1R5CB01#
6.9pF
±0.5pF GJM0332C2A6R9DB01#
1.6pF
±0.25pF GJM0334C2A1R6CB01#
7.0pF
±0.5pF GJM0332C2A7R0DB01#
1.7pF
±0.25pF GJM0334C2A1R7CB01#
7.1pF
±0.5pF GJM0332C2A7R1DB01#
1.8pF
±0.25pF GJM0334C2A1R8CB01#
7.2pF
±0.5pF GJM0332C2A7R2DB01#
1.9pF
±0.25pF GJM0334C2A1R9CB01#
7.3pF
±0.5pF GJM0332C2A7R3DB01#
2.0pF
±0.25pF GJM0334C2A2R0CB01#
7.4pF
±0.5pF GJM0332C2A7R4DB01#
2.1pF
±0.25pF GJM0333C2A2R1CB01#
7.5pF
±0.5pF GJM0332C2A7R5DB01#
2.2pF
±0.25pF GJM0333C2A2R2CB01#
7.6pF
±0.5pF GJM0332C2A7R6DB01#
2.3pF
±0.25pF GJM0333C2A2R3CB01#
7.7pF
±0.5pF GJM0332C2A7R7DB01#
2.4pF
±0.25pF GJM0333C2A2R4CB01#
7.8pF
±0.5pF GJM0332C2A7R8DB01#
2.5pF
±0.25pF GJM0333C2A2R5CB01#
7.9pF
±0.5pF GJM0332C2A7R9DB01#
2.6pF
±0.25pF GJM0333C2A2R6CB01#
8.0pF
±0.5pF GJM0332C2A8R0DB01#
2.7pF
±0.25pF GJM0333C2A2R7CB01#
8.1pF
±0.5pF GJM0332C2A8R1DB01#
2.8pF
±0.25pF GJM0333C2A2R8CB01#
8.2pF
±0.5pF GJM0332C2A8R2DB01#
2.9pF
±0.25pF GJM0333C2A2R9CB01#
8.3pF
±0.5pF GJM0332C2A8R3DB01#
3.0pF
±0.25pF GJM0333C2A3R0CB01#
8.4pF
±0.5pF GJM0332C2A8R4DB01#
3.1pF
±0.25pF GJM0333C2A3R1CB01#
8.5pF
±0.5pF GJM0332C2A8R5DB01#
3.2pF
±0.25pF GJM0333C2A3R2CB01#
8.6pF
±0.5pF GJM0332C2A8R6DB01#
3.3pF
±0.25pF GJM0333C2A3R3CB01#
8.7pF
±0.5pF GJM0332C2A8R7DB01#
3.4pF
±0.25pF GJM0333C2A3R4CB01#
8.8pF
±0.5pF GJM0332C2A8R8DB01#
3.5pF
±0.25pF GJM0333C2A3R5CB01#
8.9pF
±0.5pF GJM0332C2A8R9DB01#
3.6pF
±0.25pF GJM0333C2A3R6CB01#
9.0pF
±0.5pF GJM0332C2A9R0DB01#
3.7pF
±0.25pF GJM0333C2A3R7CB01#
9.1pF
±0.5pF GJM0332C2A9R1DB01#
3.8pF
±0.25pF GJM0333C2A3R8CB01#
9.2pF
±0.5pF GJM0332C2A9R2DB01#
3.9pF
±0.25pF GJM0333C2A3R9CB01#
9.3pF
±0.5pF GJM0332C2A9R3DB01#
4.0pF
±0.25pF GJM0332C2A4R0CB01#
9.4pF
±0.5pF GJM0332C2A9R4DB01#
4.1pF
±0.25pF GJM0332C2A4R1CB01#
9.5pF
±0.5pF GJM0332C2A9R5DB01#
4.2pF
±0.25pF GJM0332C2A4R2CB01#
9.6pF
±0.5pF GJM0332C2A9R6DB01#
4.3pF
±0.25pF GJM0332C2A4R3CB01#
9.7pF
±0.5pF GJM0332C2A9R7DB01#
4.4pF
±0.25pF GJM0332C2A4R4CB01#
9.8pF
±0.5pF GJM0332C2A9R8DB01#
4.5pF
±0.25pF GJM0332C2A4R5CB01#
9.9pF
±0.5pF GJM0332C2A9R9DB01#
4.6pF
±0.25pF GJM0332C2A4R6CB01#
10pF
±5%
GJM0332C2A100JB01#
4.7pF
±0.25pF GJM0332C2A4R7CB01#
11pF
±5%
GJM0332C2A110JB01#
4.8pF
±0.25pF GJM0332C2A4R8CB01#
12pF
±5%
GJM0332C2A120JB01#
4.9pF
±0.25pF GJM0332C2A4R9CB01#
13pF
±5%
GJM0332C2A130JB01#
5.0pF
±0.25pF GJM0332C2A5R0CB01#
±5%
GJM0332C2A150JB01#
5.1pF
±0.5pF GJM0332C2A5R1DB01#
5.2pF
5.3pF
15pF
0.30pF
±0.1pF GJM0335G2AR30BB01#
±0.5pF GJM0332C2A5R2DB01#
0.40pF
±0.1pF GJM0335G2AR40BB01#
±0.5pF GJM0332C2A5R3DB01#
0.50pF
±0.1pF GJM0335G2AR50BB01#
5.4pF
±0.5pF GJM0332C2A5R4DB01#
0.60pF
±0.1pF GJM0335G2AR60BB01#
5.5pF
±0.5pF GJM0332C2A5R5DB01#
0.70pF
±0.1pF GJM0335G2AR70BB01#
5.6pF
±0.5pF GJM0332C2A5R6DB01#
0.80pF
±0.1pF GJM0335G2AR80BB01#
5.7pF
±0.5pF GJM0332C2A5R7DB01#
0.90pF
±0.1pF GJM0335G2AR90BB01#
5.8pF
±0.5pF GJM0332C2A5R8DB01#
1.0pF
±0.25pF GJM0335G2A1R0CB01#
5.9pF
±0.5pF GJM0332C2A5R9DB01#
1.1pF
±0.25pF GJM0335G2A1R1CB01#
6.0pF
±0.5pF GJM0332C2A6R0DB01#
1.2pF
±0.25pF GJM0335G2A1R2CB01#
X8G
Part number # indicates the package specification code.
GRJ
6.4pF
GR4
±0.25pF GJM0334C2A1R0CB01#
GJM
±0.5pF GJM0332C2A6R3DB01#
1.0pF
GQM
±0.5pF GJM0332C2A6R2DB01#
6.3pF
GA2
6.2pF
±0.1pF GJM0334C2AR90BB01#
GA3
GB
±0.1pF GJM0334C2AR80BB01#
GA3
GD
±0.5pF GJM0332C2A6R1DB01#
CH
GA3
GF
6.1pF
0.33mm 100Vdc
LLL
Part Number
LLA
0.90pF
Tol.
LLM
0.80pF
Cap.
LLR
±0.1pF GJM0334C2AR70BB01#
Rated
TC
Voltage Code
NFM
CH
0.70pF
T
max.
KRM
CJ
Part Number
KR3
CK
Tol.
GMA
0.33mm 100Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 0.6×0.3mm)
70
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
25Vdc
C0G
±0.25pF GJM0335G2A2R0CB01#
3.0pF
±0.25pF GJM0335C1E3R0CB01#
2.2pF
±0.25pF GJM0335G2A2R2CB01#
3.1pF
±0.25pF GJM0335C1E3R1CB01#
2.4pF
±0.25pF GJM0335G2A2R4CB01#
3.2pF
±0.25pF GJM0335C1E3R2CB01#
2.7pF
±0.25pF GJM0335G2A2R7CB01#
3.3pF
±0.25pF GJM0335C1E3R3CB01#
3.0pF
±0.25pF GJM0335G2A3R0CB01#
3.4pF
±0.25pF GJM0335C1E3R4CB01#
3.3pF
±0.25pF GJM0335G2A3R3CB01#
3.5pF
±0.25pF GJM0335C1E3R5CB01#
3.6pF
±0.25pF GJM0335G2A3R6CB01#
3.6pF
±0.25pF GJM0335C1E3R6CB01#
3.9pF
±0.25pF GJM0335G2A3R9CB01#
3.7pF
±0.25pF GJM0335C1E3R7CB01#
4.3pF
±0.25pF GJM0335G2A4R3CB01#
3.8pF
±0.25pF GJM0335C1E3R8CB01#
4.7pF
±0.25pF GJM0335G2A4R7CB01#
3.9pF
±0.25pF GJM0335C1E3R9CB01#
5.1pF
±0.5pF GJM0335G2A5R1DB01#
4.0pF
±0.25pF GJM0335C1E4R0CB01#
5.6pF
±0.5pF GJM0335G2A5R6DB01#
4.1pF
±0.25pF GJM0335C1E4R1CB01#
6.2pF
±0.5pF GJM0335G2A6R2DB01#
4.2pF
±0.25pF GJM0335C1E4R2CB01#
6.8pF
±0.5pF GJM0335G2A6R8DB01#
4.3pF
±0.25pF GJM0335C1E4R3CB01#
7.5pF
±0.5pF GJM0335G2A7R5DB01#
4.4pF
±0.25pF GJM0335C1E4R4CB01#
8.2pF
±0.5pF GJM0335G2A8R2DB01#
4.5pF
±0.25pF GJM0335C1E4R5CB01#
9.1pF
±0.5pF GJM0335G2A9R1DB01#
4.6pF
±0.25pF GJM0335C1E4R6CB01#
±0.25pF GJM0335C1E4R7CB01#
10pF
±5%
GJM0335G2A100JB01#
D1
4.7pF
12pF
±5%
GJM0335G2A120JB01#
D1
4.8pF
±0.25pF GJM0335C1E4R8CB01#
15pF
±5%
GJM0335G2A150JB01#
D1
4.9pF
±0.25pF GJM0335C1E4R9CB01#
0.20pF
±0.1pF GJM0335C1HR20BB01#
D1
5.0pF
±0.25pF GJM0335C1E5R0CB01#
0.30pF
±0.1pF GJM0335C1HR30BB01#
D1
5.1pF
±0.5pF GJM0335C1E5R1DB01#
0.40pF
±0.1pF GJM0335C1HR40BB01#
D1
5.2pF
±0.5pF GJM0335C1E5R2DB01#
0.50pF
±0.1pF GJM0335C1HR50BB01#
D1
5.3pF
±0.5pF GJM0335C1E5R3DB01#
0.60pF
±0.1pF GJM0335C1HR60BB01#
D1
5.4pF
±0.5pF GJM0335C1E5R4DB01#
0.70pF
±0.1pF GJM0335C1HR70BB01#
D1
5.5pF
±0.5pF GJM0335C1E5R5DB01#
0.80pF
±0.1pF GJM0335C1HR80BB01#
D1
5.6pF
±0.5pF GJM0335C1E5R6DB01#
0.90pF
±0.1pF GJM0335C1HR90BB01#
D1
5.7pF
±0.5pF GJM0335C1E5R7DB01#
7.5pF
±0.5pF GJM0335C1H7R5DB01#
5.8pF
±0.5pF GJM0335C1E5R8DB01#
8.2pF
±0.5pF GJM0335C1H8R2DB01#
5.9pF
±0.5pF GJM0335C1E5R9DB01#
9.1pF
±0.5pF GJM0335C1H9R1DB01#
6.0pF
±0.5pF GJM0335C1E6R0DB01#
10pF
±5%
GJM0335C1H100JB01#
6.1pF
±0.5pF GJM0335C1E6R1DB01#
12pF
±5%
GJM0335C1H120JB01#
6.2pF
±0.5pF GJM0335C1E6R2DB01#
15pF
±5%
GJM0335C1H150JB01#
6.3pF
±0.5pF GJM0335C1E6R3DB01#
1.0pF
±0.25pF GJM0335C1E1R0CB01#
6.4pF
±0.5pF GJM0335C1E6R4DB01#
1.1pF
±0.25pF GJM0335C1E1R1CB01#
6.5pF
±0.5pF GJM0335C1E6R5DB01#
1.2pF
±0.25pF GJM0335C1E1R2CB01#
6.6pF
±0.5pF GJM0335C1E6R6DB01#
1.3pF
±0.25pF GJM0335C1E1R3CB01#
6.7pF
±0.5pF GJM0335C1E6R7DB01#
1.4pF
±0.25pF GJM0335C1E1R4CB01#
6.8pF
±0.5pF GJM0335C1E6R8DB01#
1.5pF
±0.25pF GJM0335C1E1R5CB01#
6.9pF
±0.5pF GJM0335C1E6R9DB01#
1.6pF
±0.25pF GJM0335C1E1R6CB01#
7.0pF
±0.5pF GJM0335C1E7R0DB01#
1.7pF
±0.25pF GJM0335C1E1R7CB01#
7.1pF
±0.5pF GJM0335C1E7R1DB01#
1.8pF
±0.25pF GJM0335C1E1R8CB01#
7.2pF
±0.5pF GJM0335C1E7R2DB01#
1.9pF
±0.25pF GJM0335C1E1R9CB01#
7.3pF
±0.5pF GJM0335C1E7R3DB01#
2.0pF
±0.25pF GJM0335C1E2R0CB01#
7.4pF
±0.5pF GJM0335C1E7R4DB01#
2.1pF
±0.25pF GJM0335C1E2R1CB01#
7.5pF
±0.5pF GJM0335C1E7R5DB01#
2.2pF
±0.25pF GJM0335C1E2R2CB01#
7.6pF
±0.5pF GJM0335C1E7R6DB01#
2.3pF
±0.25pF GJM0335C1E2R3CB01#
7.7pF
±0.5pF GJM0335C1E7R7DB01#
2.4pF
±0.25pF GJM0335C1E2R4CB01#
7.8pF
±0.5pF GJM0335C1E7R8DB01#
2.5pF
±0.25pF GJM0335C1E2R5CB01#
7.9pF
±0.5pF GJM0335C1E7R9DB01#
Part number # indicates the package specification code.
GRJ
±0.25pF GJM0335C1E2R9CB01#
2.0pF
GR4
2.9pF
GJM
±0.25pF GJM0335G2A1R8CB01#
GQM
±0.25pF GJM0335C1E2R8CB01#
1.8pF
GA2
±0.25pF GJM0335C1E2R7CB01#
2.8pF
GA3
GB
2.7pF
±0.25pF GJM0335G2A1R6CB01#
GA3
GD
±0.25pF GJM0335G2A1R5CB01#
GA3
GF
±0.25pF GJM0335C1E2R6CB01#
C0G
LLL
C0G
2.6pF
0.33mm 25Vdc
LLA
50Vdc
Part Number
LLM
1.6pF
Tol.
LLR
1.5pF
Cap.
NFM
±0.25pF GJM0335G2A1R3CB01#
Rated
TC
Voltage Code
KRM
1.3pF
T
max.
Part Number
KR3
0.33mm 100Vdc X8G
Tol.
GMA
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 0.6×0.3mm)
71
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
CJ
±0.25pF GJM0333C1E3R4CB01#
8.4pF
±0.5pF GJM0335C1E8R4DB01#
3.5pF
±0.25pF GJM0333C1E3R5CB01#
8.5pF
±0.5pF GJM0335C1E8R5DB01#
3.6pF
±0.25pF GJM0333C1E3R6CB01#
8.6pF
±0.5pF GJM0335C1E8R6DB01#
3.7pF
±0.25pF GJM0333C1E3R7CB01#
8.7pF
±0.5pF GJM0335C1E8R7DB01#
3.8pF
±0.25pF GJM0333C1E3R8CB01#
8.8pF
±0.5pF GJM0335C1E8R8DB01#
3.9pF
±0.25pF GJM0333C1E3R9CB01#
8.9pF
±0.5pF GJM0335C1E8R9DB01#
4.0pF
±0.25pF GJM0332C1E4R0CB01#
9.0pF
±0.5pF GJM0335C1E9R0DB01#
4.1pF
±0.25pF GJM0332C1E4R1CB01#
9.1pF
±0.5pF GJM0335C1E9R1DB01#
4.2pF
±0.25pF GJM0332C1E4R2CB01#
9.2pF
±0.5pF GJM0335C1E9R2DB01#
4.3pF
±0.25pF GJM0332C1E4R3CB01#
9.3pF
±0.5pF GJM0335C1E9R3DB01#
4.4pF
±0.25pF GJM0332C1E4R4CB01#
9.4pF
±0.5pF GJM0335C1E9R4DB01#
4.5pF
±0.25pF GJM0332C1E4R5CB01#
9.5pF
±0.5pF GJM0335C1E9R5DB01#
4.6pF
±0.25pF GJM0332C1E4R6CB01#
9.6pF
±0.5pF GJM0335C1E9R6DB01#
4.7pF
±0.25pF GJM0332C1E4R7CB01#
9.7pF
±0.5pF GJM0335C1E9R7DB01#
4.8pF
±0.25pF GJM0332C1E4R8CB01#
9.8pF
±0.5pF GJM0335C1E9R8DB01#
4.9pF
±0.25pF GJM0332C1E4R9CB01#
9.9pF
±0.5pF GJM0335C1E9R9DB01#
5.0pF
±0.25pF GJM0332C1E5R0CB01#
CH
10pF
±5%
GJM0335C1E100JB01#
5.1pF
±0.5pF GJM0332C1E5R1DB01#
11pF
±5%
GJM0335C1E110JB01#
5.2pF
±0.5pF GJM0332C1E5R2DB01#
12pF
±5%
GJM0335C1E120JB01#
5.3pF
±0.5pF GJM0332C1E5R3DB01#
13pF
±5%
GJM0335C1E130JB01#
5.4pF
±0.5pF GJM0332C1E5R4DB01#
15pF
±5%
GJM0335C1E150JB01#
5.5pF
±0.5pF GJM0332C1E5R5DB01#
16pF
±5%
GJM0335C1E160JB01#
5.6pF
±0.5pF GJM0332C1E5R6DB01#
18pF
±5%
GJM0335C1E180JB01#
5.7pF
±0.5pF GJM0332C1E5R7DB01#
20pF
±5%
GJM0335C1E200JB01#
5.8pF
±0.5pF GJM0332C1E5R8DB01#
22pF
±5%
GJM0335C1E220JB01#
5.9pF
±0.5pF GJM0332C1E5R9DB01#
24pF
±5%
GJM0335C1E240JB01#
6.0pF
±0.5pF GJM0332C1E6R0DB01#
27pF
±5%
GJM0335C1E270JB01#
6.1pF
±0.5pF GJM0332C1E6R1DB01#
30pF
±5%
GJM0335C1E300JB01#
6.2pF
±0.5pF GJM0332C1E6R2DB01#
±5%
GJM0335C1E330JB01#
6.3pF
±0.5pF GJM0332C1E6R3DB01#
1.0pF
±0.25pF GJM0334C1E1R0CB01#
6.4pF
±0.5pF GJM0332C1E6R4DB01#
1.1pF
±0.25pF GJM0334C1E1R1CB01#
6.5pF
±0.5pF GJM0332C1E6R5DB01#
1.2pF
±0.25pF GJM0334C1E1R2CB01#
6.6pF
±0.5pF GJM0332C1E6R6DB01#
1.3pF
±0.25pF GJM0334C1E1R3CB01#
6.7pF
±0.5pF GJM0332C1E6R7DB01#
1.4pF
±0.25pF GJM0334C1E1R4CB01#
6.8pF
±0.5pF GJM0332C1E6R8DB01#
1.5pF
±0.25pF GJM0334C1E1R5CB01#
6.9pF
±0.5pF GJM0332C1E6R9DB01#
1.6pF
±0.25pF GJM0334C1E1R6CB01#
7.0pF
±0.5pF GJM0332C1E7R0DB01#
1.7pF
±0.25pF GJM0334C1E1R7CB01#
7.1pF
±0.5pF GJM0332C1E7R1DB01#
1.8pF
±0.25pF GJM0334C1E1R8CB01#
7.2pF
±0.5pF GJM0332C1E7R2DB01#
1.9pF
±0.25pF GJM0334C1E1R9CB01#
7.3pF
±0.5pF GJM0332C1E7R3DB01#
2.0pF
±0.25pF GJM0334C1E2R0CB01#
7.4pF
±0.5pF GJM0332C1E7R4DB01#
2.1pF
±0.25pF GJM0333C1E2R1CB01#
7.5pF
±0.5pF GJM0332C1E7R5DB01#
2.2pF
±0.25pF GJM0333C1E2R2CB01#
7.6pF
±0.5pF GJM0332C1E7R6DB01#
2.3pF
±0.25pF GJM0333C1E2R3CB01#
7.7pF
±0.5pF GJM0332C1E7R7DB01#
2.4pF
±0.25pF GJM0333C1E2R4CB01#
7.8pF
±0.5pF GJM0332C1E7R8DB01#
2.5pF
±0.25pF GJM0333C1E2R5CB01#
7.9pF
±0.5pF GJM0332C1E7R9DB01#
2.6pF
±0.25pF GJM0333C1E2R6CB01#
8.0pF
±0.5pF GJM0332C1E8R0DB01#
2.7pF
±0.25pF GJM0333C1E2R7CB01#
8.1pF
±0.5pF GJM0332C1E8R1DB01#
2.8pF
±0.25pF GJM0333C1E2R8CB01#
8.2pF
±0.5pF GJM0332C1E8R2DB01#
2.9pF
±0.25pF GJM0333C1E2R9CB01#
8.3pF
±0.5pF GJM0332C1E8R3DB01#
3.0pF
±0.25pF GJM0333C1E3R0CB01#
8.4pF
±0.5pF GJM0332C1E8R4DB01#
Part number # indicates the package specification code.
GRJ
3.4pF
GR4
±0.5pF GJM0335C1E8R3DB01#
GJM
±0.25pF GJM0333C1E3R3CB01#
8.3pF
GQM
±0.25pF GJM0333C1E3R2CB01#
3.3pF
GA2
3.2pF
±0.5pF GJM0335C1E8R2DB01#
GA3
GB
±0.5pF GJM0335C1E8R1DB01#
GA3
GD
±0.25pF GJM0333C1E3R1CB01#
CJ
GA3
GF
3.1pF
0.33mm 25Vdc
LLL
Part Number
LLA
Tol.
LLM
8.2pF
Cap.
LLR
8.1pF
Rated
TC
Voltage Code
NFM
±0.5pF GJM0335C1E8R0DB01#
T
max.
KRM
8.0pF
33pF
CK
Part Number
KR3
C0G
Tol.
GMA
0.33mm 25Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 0.6×0.3mm)
72
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Tol.
Part Number
±0.5pF GJM0332C1E8R5DB01#
8.6pF
±0.5pF GJM0332C1E8R6DB01#
±0.1pF GJM1555C1H1R1BB01#
8.7pF
±0.5pF GJM0332C1E8R7DB01#
±0.25pF GJM1555C1H1R1CB01#
8.8pF
±0.5pF GJM0332C1E8R8DB01#
8.9pF
±0.5pF GJM0332C1E8R9DB01#
±0.1pF GJM1555C1H1R2BB01#
9.0pF
±0.5pF GJM0332C1E9R0DB01#
±0.25pF GJM1555C1H1R2CB01#
9.1pF
±0.5pF GJM0332C1E9R1DB01#
9.2pF
±0.5pF GJM0332C1E9R2DB01#
±0.1pF GJM1555C1H1R3BB01#
9.3pF
±0.5pF GJM0332C1E9R3DB01#
±0.25pF GJM1555C1H1R3CB01#
9.4pF
±0.5pF GJM0332C1E9R4DB01#
9.5pF
±0.5pF GJM0332C1E9R5DB01#
9.6pF
±0.5pF GJM0332C1E9R6DB01#
9.7pF
±0.5pF GJM0332C1E9R7DB01#
9.8pF
±0.5pF GJM0332C1E9R8DB01#
±0.1pF GJM1555C1H1R5BB01#
9.9pF
±0.5pF GJM0332C1E9R9DB01#
±0.25pF GJM1555C1H1R5CB01#
C0G
1.1pF
1.2pF
1.3pF
1.4pF
±0.05pF GJM1555C1H1R1WB01#
±0.05pF GJM1555C1H1R2WB01#
±0.05pF GJM1555C1H1R3WB01#
±0.05pF GJM1555C1H1R4WB01#
±0.1pF GJM1555C1H1R4BB01#
GR4
0.55mm 50Vdc
GRJ
8.5pF
GJM
Cap.
GQM
Rated
TC
Voltage Code
±0.25pF GJM1555C1H1R4CB01#
1.5pF
±0.05pF GJM1555C1H1R5WB01#
10pF
±5%
GJM0332C1E100JB01#
11pF
±5%
GJM0332C1E110JB01#
12pF
±5%
GJM0332C1E120JB01#
13pF
±5%
GJM0332C1E130JB01#
15pF
±5%
GJM0332C1E150JB01#
±0.1pF GJM1555C1H1R7BB01#
16pF
±5%
GJM0332C1E160JB01#
±0.25pF GJM1555C1H1R7CB01#
18pF
±5%
GJM0332C1E180JB01#
20pF
±5%
GJM0332C1E200JB01#
±0.1pF GJM1555C1H1R8BB01#
22pF
±5%
GJM0332C1E220JB01#
±0.25pF GJM1555C1H1R8CB01#
24pF
±5%
GJM0332C1E240JB01#
27pF
±5%
GJM0332C1E270JB01#
±0.1pF GJM1555C1H1R9BB01#
30pF
±5%
GJM0332C1E300JB01#
±0.25pF GJM1555C1H1R9CB01#
33pF
±5%
GJM0332C1E330JB01#
1.6pF
±0.05pF GJM1555C1H1R6WB01#
±0.1pF GJM1555C1H1R6BB01#
GA2
T
max.
GA3
GB
Part Number
±0.25pF GJM1555C1H1R6CB01#
1.7pF
1.8pF
1.9pF
2.0pF
±0.05pF GJM1555C1H1R7WB01#
±0.05pF GJM1555C1H1R8WB01#
±0.05pF GJM1555C1H1R9WB01#
±0.05pF GJM1555C1H2R0WB01#
GA3
GD
CH
Tol.
GA3
GF
0.33mm 25Vdc
Cap.
LLL
Rated
TC
Voltage Code
LLA
T
max.
GR3
(→ 0.6×0.3mm)
±0.25pF GJM1555C1H2R1CB01#
2.2pF
±0.25pF GJM1555C1H2R2CB01#
0.20pF ±0.05pF GJM1555C1HR20WB01#
±0.1pF GJM1555C1HR20BB01#
2.3pF
±0.25pF GJM1555C1H2R3CB01#
±0.1pF GJM1555C1HR30BB01#
2.4pF
±0.25pF GJM1555C1H2R4CB01#
0.50pF ±0.05pF GJM1555C1HR50WB01#
2.5pF
±0.25pF GJM1555C1H2R5CB01#
±0.1pF GJM1555C1HR60BB01#
2.6pF
±0.25pF GJM1555C1H2R6CB01#
0.80pF ±0.05pF GJM1555C1HR80WB01#
2.7pF
±0.25pF GJM1555C1H2R7CB01#
±0.1pF GJM1555C1HR90BB01#
±0.05pF GJM1555C1H1R0WB01#
±0.05pF GJM1555C1H2R7WB01#
±0.1pF GJM1555C1H2R7BB01#
0.90pF ±0.05pF GJM1555C1HR90WB01#
1.0pF
±0.05pF GJM1555C1H2R6WB01#
±0.1pF GJM1555C1H2R6BB01#
±0.1pF GJM1555C1HR70BB01#
±0.1pF GJM1555C1HR80BB01#
±0.05pF GJM1555C1H2R5WB01#
±0.1pF GJM1555C1H2R5BB01#
0.60pF ±0.05pF GJM1555C1HR60WB01#
0.70pF ±0.05pF GJM1555C1HR70WB01#
±0.05pF GJM1555C1H2R4WB01#
±0.1pF GJM1555C1H2R4BB01#
±0.1pF GJM1555C1HR40BB01#
±0.1pF GJM1555C1HR50BB01#
±0.05pF GJM1555C1H2R3WB01#
±0.1pF GJM1555C1H2R3BB01#
0.30pF ±0.05pF GJM1555C1HR30WB01#
0.40pF ±0.05pF GJM1555C1HR40WB01#
±0.05pF GJM1555C1H2R2WB01#
±0.1pF GJM1555C1H2R2BB01#
±0.1pF GJM1555C1HR10BB01#
NFM
0.10pF ±0.05pF GJM1555C1HR10WB01#
LLR
±0.1pF GJM1555C1H2R1BB01#
Part Number
KRM
C0G
Tol.
KR3
0.55mm 50Vdc
Cap.
GMA
Rated
TC
Voltage Code
±0.05pF GJM1555C1H2R1WB01#
2.8pF
±0.05pF GJM1555C1H2R8WB01#
±0.1pF GJM1555C1H1R0BB01#
±0.1pF GJM1555C1H2R8BB01#
±0.25pF GJM1555C1H1R0CB01#
±0.25pF GJM1555C1H2R8CB01#
Part number # indicates the package specification code.
GMD
T
max.
2.1pF
!Caution
/Notice
1.0×0.5mm
LLM
±0.1pF GJM1555C1H2R0BB01#
±0.25pF GJM1555C1H2R0CB01#
73
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
±0.1pF GJM1555C1H4R7BB01#
±0.25pF GJM1555C1H4R7CB01#
±0.25pF GJM1555C1H4R8CB01#
4.9pF
±0.1pF GJM1555C1H4R9BB01#
±0.25pF GJM1555C1H3R1CB01#
±0.25pF GJM1555C1H4R9CB01#
5.0pF
±0.1pF GJM1555C1H5R0BB01#
±0.1pF GJM1555C1H5R1BB01#
±0.25pF GJM1555C1H3R3CB01#
±0.25pF GJM1555C1H5R1CB01#
±0.05pF GJM1555C1H3R4WB01#
±0.5pF GJM1555C1H5R1DB01#
5.2pF
±0.1pF GJM1555C1H5R2BB01#
±0.05pF GJM1555C1H3R5WB01#
±0.25pF GJM1555C1H5R2CB01#
±0.1pF GJM1555C1H3R5BB01#
±0.5pF GJM1555C1H5R2DB01#
5.3pF
3.8pF
±0.1pF GJM1555C1H5R3BB01#
±0.1pF GJM1555C1H3R6BB01#
±0.25pF GJM1555C1H5R3CB01#
±0.05pF GJM1555C1H3R7WB01#
±0.1pF GJM1555C1H5R4BB01#
±0.25pF GJM1555C1H5R4CB01#
±0.05pF GJM1555C1H3R8WB01#
±0.5pF GJM1555C1H5R4DB01#
5.5pF
4.2pF
±0.1pF GJM1555C1H5R5BB01#
±0.05pF GJM1555C1H3R9WB01#
±0.25pF GJM1555C1H5R5CB01#
±0.1pF GJM1555C1H3R9BB01#
±0.5pF GJM1555C1H5R5DB01#
5.6pF
±0.1pF GJM1555C1H5R6BB01#
±0.1pF GJM1555C1H4R0BB01#
±0.25pF GJM1555C1H5R6CB01#
±0.05pF GJM1555C1H4R1WB01#
±0.5pF GJM1555C1H5R6DB01#
5.7pF
±0.1pF GJM1555C1H5R7BB01#
±0.25pF GJM1555C1H4R1CB01#
±0.25pF GJM1555C1H5R7CB01#
±0.05pF GJM1555C1H4R2WB01#
±0.5pF GJM1555C1H5R7DB01#
5.8pF
4.6pF
±0.05pF GJM1555C1H5R8WB01#
±0.25pF GJM1555C1H4R2CB01#
±0.1pF GJM1555C1H5R8BB01#
±0.05pF GJM1555C1H4R3WB01#
±0.25pF GJM1555C1H5R8CB01#
±0.1pF GJM1555C1H4R3BB01#
4.5pF
±0.05pF GJM1555C1H5R7WB01#
±0.1pF GJM1555C1H4R1BB01#
±0.25pF GJM1555C1H4R3CB01#
4.4pF
±0.05pF GJM1555C1H5R6WB01#
±0.05pF GJM1555C1H4R0WB01#
±0.1pF GJM1555C1H4R2BB01#
4.3pF
±0.05pF GJM1555C1H5R5WB01#
±0.25pF GJM1555C1H3R8CB01#
±0.25pF GJM1555C1H4R0CB01#
4.1pF
±0.05pF GJM1555C1H5R4WB01#
±0.1pF GJM1555C1H3R7BB01#
±0.25pF GJM1555C1H3R9CB01#
4.0pF
±0.5pF GJM1555C1H5R3DB01#
5.4pF
±0.25pF GJM1555C1H3R7CB01#
±0.1pF GJM1555C1H3R8BB01#
3.9pF
±0.05pF GJM1555C1H5R3WB01#
±0.05pF GJM1555C1H3R6WB01#
±0.25pF GJM1555C1H3R6CB01#
3.7pF
±0.05pF GJM1555C1H5R2WB01#
±0.25pF GJM1555C1H3R4CB01#
±0.25pF GJM1555C1H3R5CB01#
3.6pF
±0.05pF GJM1555C1H5R1WB01#
±0.1pF GJM1555C1H3R3BB01#
±0.5pF GJM1555C1H5R8DB01#
5.9pF
±0.05pF GJM1555C1H5R9WB01#
±0.05pF GJM1555C1H4R4WB01#
±0.1pF GJM1555C1H5R9BB01#
±0.1pF GJM1555C1H4R4BB01#
±0.25pF GJM1555C1H5R9CB01#
±0.25pF GJM1555C1H4R4CB01#
±0.5pF GJM1555C1H5R9DB01#
±0.05pF GJM1555C1H4R5WB01#
6.0pF
±0.05pF GJM1555C1H6R0WB01#
±0.1pF GJM1555C1H4R5BB01#
±0.1pF GJM1555C1H6R0BB01#
±0.25pF GJM1555C1H4R5CB01#
±0.25pF GJM1555C1H6R0CB01#
±0.05pF GJM1555C1H4R6WB01#
±0.1pF GJM1555C1H4R6BB01#
±0.25pF GJM1555C1H4R6CB01#
GA2
±0.25pF GJM1555C1H5R0CB01#
5.1pF
GA3
GB
±0.05pF GJM1555C1H3R3WB01#
±0.05pF GJM1555C1H5R0WB01#
GA3
GD
±0.05pF GJM1555C1H3R2WB01#
±0.1pF GJM1555C1H3R4BB01#
3.5pF
±0.05pF GJM1555C1H4R9WB01#
±0.1pF GJM1555C1H3R1BB01#
GA3
GF
±0.05pF GJM1555C1H3R1WB01#
GR4
±0.1pF GJM1555C1H4R8BB01#
±0.25pF GJM1555C1H3R0CB01#
±0.25pF GJM1555C1H3R2CB01#
3.4pF
±0.05pF GJM1555C1H4R8WB01#
GJM
4.8pF
±0.1pF GJM1555C1H3R0BB01#
LLL
±0.05pF GJM1555C1H3R0WB01#
GRJ
±0.1pF GJM1555C1H2R9BB01#
±0.25pF GJM1555C1H2R9CB01#
±0.1pF GJM1555C1H3R2BB01#
3.3pF
±0.05pF GJM1555C1H4R7WB01#
GQM
4.7pF
Part Number
LLA
C0G
Tol.
LLM
3.2pF
0.55mm 50Vdc
Cap.
LLR
3.1pF
Rated
TC
Voltage Code
NFM
3.0pF
±0.05pF GJM1555C1H2R9WB01#
T
max.
KRM
2.9pF
Part Number
KR3
C0G
Tol.
±0.5pF GJM1555C1H6R0DB01#
6.1pF
GMA
0.55mm 50Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 1.0×0.5mm)
±0.05pF GJM1555C1H6R1WB01#
±0.1pF GJM1555C1H6R1BB01#
Part number # indicates the package specification code.
74
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Tol.
Part Number
6.1pF
±0.25pF GJM1555C1H6R1CB01#
±0.5pF GJM1555C1H6R1DB01#
±0.1pF GJM1555C1H7R5BB01#
6.2pF
±0.05pF GJM1555C1H6R2WB01#
±0.25pF GJM1555C1H7R5CB01#
7.5pF
±0.05pF GJM1555C1H6R3WB01#
±0.25pF GJM1555C1H7R6CB01#
±0.5pF GJM1555C1H7R6DB01#
7.7pF
±0.5pF GJM1555C1H6R3DB01#
±0.1pF GJM1555C1H7R7BB01#
±0.05pF GJM1555C1H6R4WB01#
±0.25pF GJM1555C1H7R7CB01#
±0.1pF GJM1555C1H7R8BB01#
±0.25pF GJM1555C1H7R8CB01#
±0.1pF GJM1555C1H6R5BB01#
±0.5pF GJM1555C1H7R8DB01#
7.9pF
±0.5pF GJM1555C1H6R5DB01#
±0.1pF GJM1555C1H7R9BB01#
±0.05pF GJM1555C1H6R6WB01#
±0.25pF GJM1555C1H7R9CB01#
±0.1pF GJM1555C1H6R6BB01#
±0.25pF GJM1555C1H6R6CB01#
6.7pF
±0.5pF GJM1555C1H7R9DB01#
8.0pF
±0.1pF GJM1555C1H8R0BB01#
±0.05pF GJM1555C1H6R7WB01#
±0.25pF GJM1555C1H8R0CB01#
±0.25pF GJM1555C1H6R7CB01#
±0.5pF GJM1555C1H8R0DB01#
8.1pF
±0.5pF GJM1555C1H6R7DB01#
±0.1pF GJM1555C1H8R1BB01#
±0.25pF GJM1555C1H8R1CB01#
±0.1pF GJM1555C1H6R8BB01#
±0.5pF GJM1555C1H8R1DB01#
8.2pF
±0.5pF GJM1555C1H6R8DB01#
±0.1pF GJM1555C1H8R2BB01#
±0.25pF GJM1555C1H8R2CB01#
±0.1pF GJM1555C1H6R9BB01#
±0.5pF GJM1555C1H8R2DB01#
8.3pF
±0.1pF GJM1555C1H8R3BB01#
±0.05pF GJM1555C1H7R0WB01#
±0.25pF GJM1555C1H8R3CB01#
±0.1pF GJM1555C1H7R0BB01#
±0.5pF GJM1555C1H8R3DB01#
8.4pF
±0.1pF GJM1555C1H8R4BB01#
±0.05pF GJM1555C1H7R1WB01#
±0.25pF GJM1555C1H8R4CB01#
±0.25pF GJM1555C1H7R1CB01#
±0.5pF GJM1555C1H8R4DB01#
8.5pF
±0.5pF GJM1555C1H7R1DB01#
±0.1pF GJM1555C1H8R5BB01#
±0.25pF GJM1555C1H8R5CB01#
±0.1pF GJM1555C1H7R2BB01#
±0.5pF GJM1555C1H8R5DB01#
8.6pF
±0.05pF GJM1555C1H8R6WB01#
±0.5pF GJM1555C1H7R2DB01#
±0.1pF GJM1555C1H8R6BB01#
±0.05pF GJM1555C1H7R3WB01#
±0.25pF GJM1555C1H8R6CB01#
±0.1pF GJM1555C1H7R3BB01#
±0.5pF GJM1555C1H8R6DB01#
±0.25pF GJM1555C1H7R3CB01#
7.4pF
±0.05pF GJM1555C1H8R5WB01#
±0.05pF GJM1555C1H7R2WB01#
±0.25pF GJM1555C1H7R2CB01#
7.3pF
±0.05pF GJM1555C1H8R4WB01#
±0.5pF GJM1555C1H7R0DB01#
±0.1pF GJM1555C1H7R1BB01#
7.2pF
±0.05pF GJM1555C1H8R3WB01#
±0.5pF GJM1555C1H6R9DB01#
±0.25pF GJM1555C1H7R0CB01#
7.1pF
±0.05pF GJM1555C1H8R2WB01#
±0.05pF GJM1555C1H6R9WB01#
±0.25pF GJM1555C1H6R9CB01#
7.0pF
±0.05pF GJM1555C1H8R1WB01#
±0.05pF GJM1555C1H6R8WB01#
±0.25pF GJM1555C1H6R8CB01#
6.9pF
±0.05pF GJM1555C1H8R0WB01#
±0.5pF GJM1555C1H6R6DB01#
±0.1pF GJM1555C1H6R7BB01#
6.8pF
±0.05pF GJM1555C1H7R9WB01#
8.7pF
±0.05pF GJM1555C1H8R7WB01#
±0.5pF GJM1555C1H7R3DB01#
±0.1pF GJM1555C1H8R7BB01#
±0.05pF GJM1555C1H7R4WB01#
±0.25pF GJM1555C1H8R7CB01#
±0.1pF GJM1555C1H7R4BB01#
±0.25pF GJM1555C1H7R4CB01#
±0.5pF GJM1555C1H7R4DB01#
GA3
GB
±0.5pF GJM1555C1H6R4DB01#
±0.05pF GJM1555C1H6R5WB01#
±0.25pF GJM1555C1H6R5CB01#
6.6pF
±0.05pF GJM1555C1H7R8WB01#
GA2
±0.5pF GJM1555C1H7R7DB01#
7.8pF
GA3
GD
±0.1pF GJM1555C1H6R4BB01#
±0.25pF GJM1555C1H6R4CB01#
6.5pF
±0.05pF GJM1555C1H7R7WB01#
GA3
GF
±0.25pF GJM1555C1H6R3CB01#
GR4
±0.1pF GJM1555C1H7R6BB01#
GJM
±0.5pF GJM1555C1H6R2DB01#
±0.1pF GJM1555C1H6R3BB01#
6.4pF
±0.05pF GJM1555C1H7R6WB01#
LLL
6.3pF
±0.5pF GJM1555C1H7R5DB01#
7.6pF
GQM
±0.1pF GJM1555C1H6R2BB01#
±0.25pF GJM1555C1H6R2CB01#
±0.05pF GJM1555C1H7R5WB01#
LLA
C0G
LLM
0.55mm 50Vdc
GRJ
Cap.
LLR
Rated
TC
Voltage Code
NFM
T
max.
KRM
Part Number
KR3
C0G
Tol.
±0.5pF GJM1555C1H8R7DB01#
8.8pF
GMA
0.55mm 50Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 1.0×0.5mm)
±0.05pF GJM1555C1H8R8WB01#
±0.1pF GJM1555C1H8R8BB01#
Part number # indicates the package specification code.
75
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GJM1555C1H180JB01#
±2%
GJM1555C1H200GB01#
±5%
GJM1555C1H200JB01#
±1%
GJM1555C1H220FB01#
±0.5pF GJM1555C1H9R0DB01#
±2%
GJM1555C1H220GB01#
±0.05pF GJM1555C1H9R1WB01#
±5%
GJM1555C1H220JB01#
18pF
±0.5pF GJM1555C1H8R9DB01#
9.0pF
±0.05pF GJM1555C1H9R0WB01#
20pF
±0.1pF GJM1555C1H9R0BB01#
±0.25pF GJM1555C1H9R0CB01#
9.1pF
22pF
±0.1pF GJM1555C1H9R1BB01#
9.2pF
±1%
GJM1555C1H240FB01#
±0.25pF GJM1555C1H9R1CB01#
±2%
GJM1555C1H240GB01#
±0.5pF GJM1555C1H9R1DB01#
±5%
GJM1555C1H240JB01#
±1%
GJM1555C1H270FB01#
±0.1pF GJM1555C1H9R2BB01#
±2%
GJM1555C1H270GB01#
±0.25pF GJM1555C1H9R2CB01#
±5%
GJM1555C1H270JB01#
24pF
±0.05pF GJM1555C1H9R2WB01#
27pF
±0.5pF GJM1555C1H9R2DB01#
9.3pF
±1%
GJM1555C1H300FB01#
±0.05pF GJM1555C1H9R3WB01#
±2%
GJM1555C1H300GB01#
±0.1pF GJM1555C1H9R3BB01#
±5%
GJM1555C1H300JB01#
±1%
GJM1555C1H330FB01#
±2%
GJM1555C1H330GB01#
30pF
±0.25pF GJM1555C1H9R3CB01#
33pF
±0.5pF GJM1555C1H9R3DB01#
9.4pF
±0.05pF GJM1555C1H9R4WB01#
±5%
GJM1555C1H330JB01#
±1%
GJM1555C1H360FB01#
±0.25pF GJM1555C1H9R4CB01#
±2%
GJM1555C1H360GB01#
±0.5pF GJM1555C1H9R4DB01#
±5%
GJM1555C1H360JB01#
±1%
GJM1555C1H390FB01#
±0.1pF GJM1555C1H9R5BB01#
±2%
GJM1555C1H390GB01#
±0.25pF GJM1555C1H9R5CB01#
±5%
GJM1555C1H390JB01#
±1%
GJM1555C1H430FB01#
±0.05pF GJM1555C1H9R6WB01#
±2%
GJM1555C1H430GB01#
±0.1pF GJM1555C1H9R6BB01#
±5%
GJM1555C1H430JB01#
±0.1pF GJM1555C1H9R4BB01#
9.5pF
36pF
±0.05pF GJM1555C1H9R5WB01#
39pF
±0.5pF GJM1555C1H9R5DB01#
9.6pF
43pF
±0.25pF GJM1555C1H9R6CB01#
9.7pF
±1%
GJM1555C1H470FB01#
±0.5pF GJM1555C1H9R6DB01#
±2%
GJM1555C1H470GB01#
±0.05pF GJM1555C1H9R7WB01#
±5%
GJM1555C1H470JB01#
±0.1pF GJM1555C1H9R7BB01#
47pF
CK
0.10pF ±0.05pF GJM1554C1HR10WB01#
±0.25pF GJM1555C1H9R7CB01#
±0.5pF GJM1555C1H9R7DB01#
9.8pF
±0.1pF GJM1554C1HR10BB01#
0.20pF ±0.05pF GJM1554C1HR20WB01#
±0.05pF GJM1555C1H9R8WB01#
±0.1pF GJM1555C1H9R8BB01#
±0.1pF GJM1554C1HR20BB01#
0.30pF ±0.05pF GJM1554C1HR30WB01#
±0.25pF GJM1555C1H9R8CB01#
±0.5pF GJM1555C1H9R8DB01#
9.9pF
±0.1pF GJM1554C1HR30BB01#
0.40pF ±0.05pF GJM1554C1HR40WB01#
±0.05pF GJM1555C1H9R9WB01#
±0.1pF GJM1555C1H9R9BB01#
±0.1pF GJM1554C1HR40BB01#
0.50pF ±0.05pF GJM1554C1HR50WB01#
±0.25pF GJM1555C1H9R9CB01#
±0.5pF GJM1555C1H9R9DB01#
10pF
11pF
12pF
13pF
±2%
GJM1555C1H100GB01#
±5%
GJM1555C1H100JB01#
±2%
GJM1555C1H110GB01#
±5%
GJM1555C1H110JB01#
±2%
GJM1555C1H120GB01#
±5%
GJM1555C1H120JB01#
±2%
GJM1555C1H130GB01#
±5%
GJM1555C1H130JB01#
GRJ
GJM1555C1H180GB01#
±5%
±0.25pF GJM1555C1H8R9CB01#
GR4
GJM1555C1H160JB01#
±2%
±0.1pF GJM1555C1H8R9BB01#
GJM
GJM1555C1H160GB01#
±5%
±0.5pF GJM1555C1H8R8DB01#
GQM
GJM1555C1H150JB01#
±2%
±0.05pF GJM1555C1H8R9WB01#
GA2
±5%
16pF
8.9pF
C0G
GA3
GB
GJM1555C1H150GB01#
0.55mm 50Vdc
GA3
GD
±2%
±0.25pF GJM1555C1H8R8CB01#
GA3
GF
15pF
8.8pF
LLL
Part Number
LLA
Tol.
LLM
Cap.
LLR
Rated
TC
Voltage Code
NFM
T
max.
KRM
Part Number
KR3
C0G
Tol.
±0.1pF GJM1554C1HR50BB01#
0.60pF ±0.05pF GJM1554C1HR60WB01#
GMA
0.55mm 50Vdc
Cap.
±0.1pF GJM1554C1HR60BB01#
0.70pF ±0.05pF GJM1554C1HR70WB01#
±0.1pF GJM1554C1HR70BB01#
0.80pF ±0.05pF GJM1554C1HR80WB01#
±0.1pF GJM1554C1HR80BB01#
0.90pF ±0.05pF GJM1554C1HR90WB01#
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 1.0×0.5mm)
±0.1pF GJM1554C1HR90BB01#
1.0pF
±0.05pF GJM1554C1H1R0WB01#
Part number # indicates the package specification code.
76
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
1.5pF
1.6pF
1.7pF
3.0pF
±0.1pF GJM1554C1H1R2BB01#
±0.1pF GJM1553C1H3R0BB01#
±0.25pF GJM1554C1H1R2CB01#
±0.25pF GJM1553C1H3R0CB01#
±0.05pF GJM1554C1H1R3WB01#
3.1pF
±0.1pF GJM1553C1H3R1BB01#
±0.25pF GJM1554C1H1R3CB01#
±0.25pF GJM1553C1H3R1CB01#
±0.05pF GJM1554C1H1R4WB01#
3.2pF
2.0pF
CJ
2.1pF
2.2pF
2.3pF
2.4pF
±0.1pF GJM1553C1H3R2BB01#
±0.25pF GJM1554C1H1R4CB01#
±0.25pF GJM1553C1H3R2CB01#
±0.05pF GJM1554C1H1R5WB01#
3.3pF
±0.1pF GJM1553C1H3R3BB01#
±0.25pF GJM1554C1H1R5CB01#
±0.25pF GJM1553C1H3R3CB01#
±0.05pF GJM1554C1H1R6WB01#
3.4pF
2.7pF
2.8pF
±0.1pF GJM1553C1H3R4BB01#
±0.25pF GJM1554C1H1R6CB01#
±0.25pF GJM1553C1H3R4CB01#
±0.05pF GJM1554C1H1R7WB01#
3.5pF
±0.05pF GJM1553C1H3R5WB01#
±0.1pF GJM1553C1H3R5BB01#
±0.25pF GJM1553C1H3R5CB01#
±0.05pF GJM1554C1H1R8WB01#
3.6pF
±0.05pF GJM1553C1H3R6WB01#
±0.1pF GJM1554C1H1R8BB01#
±0.1pF GJM1553C1H3R6BB01#
±0.25pF GJM1554C1H1R8CB01#
±0.25pF GJM1553C1H3R6CB01#
±0.05pF GJM1554C1H1R9WB01#
3.7pF
±0.05pF GJM1553C1H3R7WB01#
±0.1pF GJM1554C1H1R9BB01#
±0.1pF GJM1553C1H3R7BB01#
±0.25pF GJM1554C1H1R9CB01#
±0.25pF GJM1553C1H3R7CB01#
±0.05pF GJM1554C1H2R0WB01#
3.8pF
±0.05pF GJM1553C1H3R8WB01#
±0.1pF GJM1554C1H2R0BB01#
±0.1pF GJM1553C1H3R8BB01#
±0.25pF GJM1554C1H2R0CB01#
±0.25pF GJM1553C1H3R8CB01#
±0.05pF GJM1553C1H2R1WB01#
3.9pF
±0.05pF GJM1553C1H3R9WB01#
±0.1pF GJM1553C1H2R1BB01#
±0.1pF GJM1553C1H3R9BB01#
±0.25pF GJM1553C1H2R1CB01#
±0.25pF GJM1553C1H3R9CB01#
±0.05pF GJM1553C1H2R2WB01#
CH
4.0pF
±0.05pF GJM1552C1H4R0WB01#
±0.1pF GJM1553C1H2R2BB01#
±0.1pF GJM1552C1H4R0BB01#
±0.25pF GJM1553C1H2R2CB01#
±0.25pF GJM1552C1H4R0CB01#
±0.05pF GJM1553C1H2R3WB01#
4.1pF
±0.05pF GJM1552C1H4R1WB01#
±0.1pF GJM1553C1H2R3BB01#
±0.1pF GJM1552C1H4R1BB01#
±0.25pF GJM1553C1H2R3CB01#
±0.25pF GJM1552C1H4R1CB01#
±0.05pF GJM1553C1H2R4WB01#
4.2pF
±0.05pF GJM1553C1H2R5WB01#
±0.05pF GJM1552C1H4R2WB01#
±0.1pF GJM1552C1H4R2BB01#
±0.25pF GJM1552C1H4R2CB01#
4.3pF
±0.05pF GJM1552C1H4R3WB01#
±0.1pF GJM1553C1H2R5BB01#
±0.1pF GJM1552C1H4R3BB01#
±0.25pF GJM1553C1H2R5CB01#
±0.25pF GJM1552C1H4R3CB01#
±0.05pF GJM1553C1H2R6WB01#
4.4pF
±0.05pF GJM1552C1H4R4WB01#
±0.1pF GJM1553C1H2R6BB01#
±0.1pF GJM1552C1H4R4BB01#
±0.25pF GJM1553C1H2R6CB01#
±0.25pF GJM1552C1H4R4CB01#
±0.05pF GJM1553C1H2R7WB01#
4.5pF
±0.05pF GJM1552C1H4R5WB01#
±0.1pF GJM1553C1H2R7BB01#
±0.1pF GJM1552C1H4R5BB01#
±0.25pF GJM1553C1H2R7CB01#
±0.25pF GJM1552C1H4R5CB01#
±0.05pF GJM1553C1H2R8WB01#
GRJ
±0.05pF GJM1553C1H3R4WB01#
±0.1pF GJM1554C1H1R6BB01#
±0.25pF GJM1553C1H2R4CB01#
2.6pF
±0.05pF GJM1553C1H3R3WB01#
±0.1pF GJM1554C1H1R5BB01#
±0.1pF GJM1553C1H2R4BB01#
2.5pF
±0.05pF GJM1553C1H3R2WB01#
±0.1pF GJM1554C1H1R4BB01#
±0.25pF GJM1554C1H1R7CB01#
1.9pF
±0.05pF GJM1553C1H3R1WB01#
±0.1pF GJM1554C1H1R3BB01#
±0.1pF GJM1554C1H1R7BB01#
1.8pF
±0.05pF GJM1553C1H3R0WB01#
GR4
±0.05pF GJM1554C1H1R2WB01#
GJM
±0.25pF GJM1553C1H2R9CB01#
GQM
±0.1pF GJM1553C1H2R9BB01#
±0.25pF GJM1554C1H1R1CB01#
GA2
1.4pF
±0.05pF GJM1553C1H2R9WB01#
±0.1pF GJM1554C1H1R1BB01#
GA3
GB
1.3pF
2.9pF
GA3
GD
1.2pF
±0.25pF GJM1553C1H2R8CB01#
±0.05pF GJM1554C1H1R1WB01#
GA3
GF
±0.25pF GJM1554C1H1R0CB01#
1.1pF
±0.1pF GJM1553C1H2R8BB01#
LLL
2.8pF
Part Number
LLA
CJ
Tol.
LLM
0.55mm 50Vdc
Cap.
LLR
Rated
TC
Voltage Code
NFM
±0.1pF GJM1554C1H1R0BB01#
T
max.
KRM
1.0pF
Part Number
KR3
CK
Tol.
4.6pF
GMA
0.55mm 50Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 1.0×0.5mm)
±0.05pF GJM1552C1H4R6WB01#
Part number # indicates the package specification code.
77
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
±0.25pF GJM1552C1H4R6CB01#
±0.1pF GJM1552C1H6R1BB01#
±0.05pF GJM1552C1H4R7WB01#
±0.25pF GJM1552C1H6R1CB01#
±0.1pF GJM1552C1H6R2BB01#
±0.1pF GJM1552C1H4R8BB01#
±0.25pF GJM1552C1H6R2CB01#
±0.1pF GJM1552C1H4R9BB01#
±0.1pF GJM1552C1H6R3BB01#
±0.25pF GJM1552C1H6R3CB01#
±0.25pF GJM1552C1H6R4CB01#
±0.5pF GJM1552C1H6R4DB01#
6.5pF
±0.5pF GJM1552C1H5R1DB01#
±0.1pF GJM1552C1H6R5BB01#
±0.05pF GJM1552C1H5R2WB01#
±0.25pF GJM1552C1H6R5CB01#
±0.1pF GJM1552C1H5R2BB01#
±0.25pF GJM1552C1H5R2CB01#
±0.5pF GJM1552C1H6R5DB01#
6.6pF
±0.1pF GJM1552C1H6R6BB01#
±0.05pF GJM1552C1H5R3WB01#
±0.25pF GJM1552C1H6R6CB01#
±0.25pF GJM1552C1H5R3CB01#
±0.5pF GJM1552C1H6R6DB01#
6.7pF
±0.5pF GJM1552C1H5R3DB01#
±0.1pF GJM1552C1H6R7BB01#
±0.25pF GJM1552C1H6R7CB01#
±0.1pF GJM1552C1H5R4BB01#
±0.5pF GJM1552C1H6R7DB01#
6.8pF
±0.5pF GJM1552C1H5R4DB01#
±0.1pF GJM1552C1H6R8BB01#
±0.25pF GJM1552C1H6R8CB01#
±0.1pF GJM1552C1H5R5BB01#
±0.5pF GJM1552C1H6R8DB01#
6.9pF
±0.1pF GJM1552C1H6R9BB01#
±0.05pF GJM1552C1H5R6WB01#
±0.25pF GJM1552C1H6R9CB01#
±0.1pF GJM1552C1H5R6BB01#
±0.5pF GJM1552C1H6R9DB01#
7.0pF
±0.1pF GJM1552C1H7R0BB01#
±0.05pF GJM1552C1H5R7WB01#
±0.25pF GJM1552C1H7R0CB01#
±0.25pF GJM1552C1H5R7CB01#
±0.5pF GJM1552C1H7R0DB01#
7.1pF
±0.5pF GJM1552C1H5R7DB01#
±0.1pF GJM1552C1H7R1BB01#
±0.25pF GJM1552C1H7R1CB01#
±0.1pF GJM1552C1H5R8BB01#
±0.5pF GJM1552C1H7R1DB01#
7.2pF
±0.05pF GJM1552C1H7R2WB01#
±0.5pF GJM1552C1H5R8DB01#
±0.1pF GJM1552C1H7R2BB01#
±0.05pF GJM1552C1H5R9WB01#
±0.25pF GJM1552C1H7R2CB01#
±0.1pF GJM1552C1H5R9BB01#
±0.5pF GJM1552C1H7R2DB01#
±0.25pF GJM1552C1H5R9CB01#
6.0pF
±0.05pF GJM1552C1H7R1WB01#
±0.05pF GJM1552C1H5R8WB01#
±0.25pF GJM1552C1H5R8CB01#
5.9pF
±0.05pF GJM1552C1H7R0WB01#
±0.5pF GJM1552C1H5R6DB01#
±0.1pF GJM1552C1H5R7BB01#
5.8pF
±0.05pF GJM1552C1H6R9WB01#
±0.5pF GJM1552C1H5R5DB01#
±0.25pF GJM1552C1H5R6CB01#
5.7pF
±0.05pF GJM1552C1H6R8WB01#
±0.05pF GJM1552C1H5R5WB01#
±0.25pF GJM1552C1H5R5CB01#
5.6pF
±0.05pF GJM1552C1H6R7WB01#
±0.05pF GJM1552C1H5R4WB01#
±0.25pF GJM1552C1H5R4CB01#
5.5pF
±0.05pF GJM1552C1H6R6WB01#
±0.5pF GJM1552C1H5R2DB01#
±0.1pF GJM1552C1H5R3BB01#
5.4pF
±0.05pF GJM1552C1H6R5WB01#
7.3pF
±0.05pF GJM1552C1H7R3WB01#
±0.5pF GJM1552C1H5R9DB01#
±0.1pF GJM1552C1H7R3BB01#
±0.05pF GJM1552C1H6R0WB01#
±0.25pF GJM1552C1H7R3CB01#
±0.1pF GJM1552C1H6R0BB01#
±0.25pF GJM1552C1H6R0CB01#
±0.5pF GJM1552C1H6R0DB01#
GA3
GB
±0.1pF GJM1552C1H6R4BB01#
±0.05pF GJM1552C1H5R1WB01#
GA3
GD
±0.25pF GJM1552C1H5R0CB01#
±0.1pF GJM1552C1H5R1BB01#
5.3pF
±0.05pF GJM1552C1H6R4WB01#
GA2
±0.5pF GJM1552C1H6R3DB01#
6.4pF
GA3
GF
±0.05pF GJM1552C1H5R0WB01#
±0.25pF GJM1552C1H5R1CB01#
5.2pF
±0.05pF GJM1552C1H6R3WB01#
±0.25pF GJM1552C1H4R9CB01#
±0.1pF GJM1552C1H5R0BB01#
5.1pF
±0.5pF GJM1552C1H6R2DB01#
6.3pF
LLL
5.0pF
±0.05pF GJM1552C1H4R9WB01#
GJM
±0.05pF GJM1552C1H4R8WB01#
±0.25pF GJM1552C1H4R8CB01#
4.9pF
±0.05pF GJM1552C1H6R2WB01#
GR4
±0.5pF GJM1552C1H6R1DB01#
6.2pF
GQM
±0.1pF GJM1552C1H4R7BB01#
±0.25pF GJM1552C1H4R7CB01#
4.8pF
±0.05pF GJM1552C1H6R1WB01#
GRJ
6.1pF
Part Number
LLA
CH
Tol.
LLM
0.55mm 50Vdc
Cap.
LLR
Rated
TC
Voltage Code
NFM
4.7pF
±0.1pF GJM1552C1H4R6BB01#
T
max.
KRM
4.6pF
Part Number
KR3
CH
Tol.
±0.5pF GJM1552C1H7R3DB01#
7.4pF
GMA
0.55mm 50Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 1.0×0.5mm)
±0.05pF GJM1552C1H7R4WB01#
±0.1pF GJM1552C1H7R4BB01#
Part number # indicates the package specification code.
78
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Tol.
Part Number
7.4pF
±0.25pF GJM1552C1H7R4CB01#
±0.5pF GJM1552C1H7R4DB01#
±0.1pF GJM1552C1H8R8BB01#
7.5pF
±0.05pF GJM1552C1H7R5WB01#
±0.25pF GJM1552C1H8R8CB01#
8.8pF
±0.05pF GJM1552C1H7R6WB01#
±0.25pF GJM1552C1H8R9CB01#
±0.5pF GJM1552C1H8R9DB01#
9.0pF
±0.5pF GJM1552C1H7R6DB01#
±0.1pF GJM1552C1H9R0BB01#
±0.05pF GJM1552C1H7R7WB01#
±0.25pF GJM1552C1H9R0CB01#
±0.1pF GJM1552C1H9R1BB01#
±0.25pF GJM1552C1H9R1CB01#
±0.1pF GJM1552C1H7R8BB01#
±0.5pF GJM1552C1H9R1DB01#
9.2pF
±0.5pF GJM1552C1H7R8DB01#
±0.1pF GJM1552C1H9R2BB01#
±0.05pF GJM1552C1H7R9WB01#
±0.25pF GJM1552C1H9R2CB01#
±0.1pF GJM1552C1H7R9BB01#
±0.25pF GJM1552C1H7R9CB01#
8.0pF
±0.5pF GJM1552C1H9R2DB01#
9.3pF
±0.1pF GJM1552C1H9R3BB01#
±0.05pF GJM1552C1H8R0WB01#
±0.25pF GJM1552C1H9R3CB01#
±0.25pF GJM1552C1H8R0CB01#
±0.5pF GJM1552C1H9R3DB01#
9.4pF
±0.5pF GJM1552C1H8R0DB01#
±0.1pF GJM1552C1H9R4BB01#
±0.25pF GJM1552C1H9R4CB01#
±0.1pF GJM1552C1H8R1BB01#
±0.5pF GJM1552C1H9R4DB01#
9.5pF
±0.5pF GJM1552C1H8R1DB01#
±0.1pF GJM1552C1H9R5BB01#
±0.25pF GJM1552C1H9R5CB01#
±0.1pF GJM1552C1H8R2BB01#
±0.5pF GJM1552C1H9R5DB01#
9.6pF
±0.1pF GJM1552C1H9R6BB01#
±0.05pF GJM1552C1H8R3WB01#
±0.25pF GJM1552C1H9R6CB01#
±0.1pF GJM1552C1H8R3BB01#
±0.5pF GJM1552C1H9R6DB01#
9.7pF
±0.1pF GJM1552C1H9R7BB01#
±0.05pF GJM1552C1H8R4WB01#
±0.25pF GJM1552C1H9R7CB01#
±0.25pF GJM1552C1H8R4CB01#
±0.5pF GJM1552C1H9R7DB01#
9.8pF
±0.5pF GJM1552C1H8R4DB01#
±0.1pF GJM1552C1H9R8BB01#
±0.25pF GJM1552C1H9R8CB01#
±0.1pF GJM1552C1H8R5BB01#
±0.5pF GJM1552C1H9R8DB01#
9.9pF
±0.05pF GJM1552C1H9R9WB01#
±0.5pF GJM1552C1H8R5DB01#
±0.1pF GJM1552C1H9R9BB01#
±0.05pF GJM1552C1H8R6WB01#
±0.25pF GJM1552C1H9R9CB01#
±0.1pF GJM1552C1H8R6BB01#
±0.5pF GJM1552C1H9R9DB01#
±0.25pF GJM1552C1H8R6CB01#
10pF
±0.5pF GJM1552C1H8R6DB01#
8.7pF
±0.05pF GJM1552C1H9R8WB01#
±0.05pF GJM1552C1H8R5WB01#
±0.25pF GJM1552C1H8R5CB01#
8.6pF
±0.05pF GJM1552C1H9R7WB01#
±0.5pF GJM1552C1H8R3DB01#
±0.1pF GJM1552C1H8R4BB01#
8.5pF
±0.05pF GJM1552C1H9R6WB01#
±0.5pF GJM1552C1H8R2DB01#
±0.25pF GJM1552C1H8R3CB01#
8.4pF
±0.05pF GJM1552C1H9R5WB01#
±0.05pF GJM1552C1H8R2WB01#
±0.25pF GJM1552C1H8R2CB01#
8.3pF
±0.05pF GJM1552C1H9R4WB01#
±0.05pF GJM1552C1H8R1WB01#
±0.25pF GJM1552C1H8R1CB01#
8.2pF
±0.05pF GJM1552C1H9R3WB01#
±0.5pF GJM1552C1H7R9DB01#
±0.1pF GJM1552C1H8R0BB01#
8.1pF
±0.05pF GJM1552C1H9R2WB01#
±0.05pF GJM1552C1H8R7WB01#
11pF
±0.1pF GJM1552C1H8R7BB01#
±0.25pF GJM1552C1H8R7CB01#
±0.5pF GJM1552C1H8R7DB01#
GA3
GB
±0.5pF GJM1552C1H7R7DB01#
±0.05pF GJM1552C1H7R8WB01#
±0.25pF GJM1552C1H7R8CB01#
7.9pF
±0.05pF GJM1552C1H9R1WB01#
GA2
±0.5pF GJM1552C1H9R0DB01#
9.1pF
GA3
GD
±0.1pF GJM1552C1H7R7BB01#
±0.25pF GJM1552C1H7R7CB01#
7.8pF
±0.05pF GJM1552C1H9R0WB01#
GA3
GF
±0.25pF GJM1552C1H7R6CB01#
GR4
±0.1pF GJM1552C1H8R9BB01#
GJM
±0.5pF GJM1552C1H7R5DB01#
±0.1pF GJM1552C1H7R6BB01#
7.7pF
±0.05pF GJM1552C1H8R9WB01#
LLL
7.6pF
±0.5pF GJM1552C1H8R8DB01#
8.9pF
GQM
±0.1pF GJM1552C1H7R5BB01#
±0.25pF GJM1552C1H7R5CB01#
±0.05pF GJM1552C1H8R8WB01#
LLA
CH
LLM
0.55mm 50Vdc
GRJ
Cap.
LLR
Rated
TC
Voltage Code
NFM
T
max.
KRM
Part Number
KR3
CH
Tol.
12pF
±2%
GJM1552C1H100GB01#
±5%
GJM1552C1H100JB01#
±2%
GJM1552C1H110GB01#
±5%
GJM1552C1H110JB01#
±2%
GJM1552C1H120GB01#
±5%
GJM1552C1H120JB01#
Part number # indicates the package specification code.
GMA
0.55mm 50Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 1.0×0.5mm)
79
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GJM1552C1H200JB01#
±1%
GJM1552C1H220FB01#
±2%
GJM1552C1H220GB01#
±5%
GJM1552C1H220JB01#
±1%
GJM1552C1H240FB01#
±2%
GJM1552C1H240GB01#
±5%
GJM1552C1H240JB01#
±1%
GJM1552C1H270FB01#
±2%
GJM1552C1H270GB01#
±5%
GJM1552C1H270JB01#
±1%
GJM1552C1H300FB01#
±2%
GJM1552C1H300GB01#
±5%
GJM1552C1H300JB01#
±1%
GJM1552C1H330FB01#
±2%
GJM1552C1H330GB01#
±5%
GJM1552C1H330JB01#
±1%
GJM1552C1H360FB01#
±2%
GJM1552C1H360GB01#
22pF
24pF
27pF
30pF
33pF
36pF
39pF
43pF
47pF
±5%
GJM1552C1H360JB01#
±1%
GJM1552C1H390FB01#
±2%
GJM1552C1H390GB01#
±5%
GJM1552C1H390JB01#
±1%
GJM1552C1H430FB01#
±2%
GJM1552C1H430GB01#
±5%
GJM1552C1H430JB01#
±1%
GJM1552C1H470FB01#
±2%
GJM1552C1H470GB01#
±5%
GJM1552C1H470JB01#
GRJ
GJM1552C1H200GB01#
±5%
GR4
GJM1552C1H180JB01#
±2%
20pF
GJM
GJM1552C1H180GB01#
±5%
GQM
±2%
18pF
GA2
GJM1552C1H160JB01#
GA3
GB
GJM1552C1H160GB01#
±5%
GA3
GD
GJM1552C1H150JB01#
±2%
16pF
GA3
GF
GJM1552C1H150GB01#
±5%
LLL
GJM1552C1H130JB01#
±2%
LLA
±5%
15pF
LLM
GJM1552C1H130GB01#
LLR
±2%
NFM
13pF
KRM
Part Number
KR3
CH
Tol.
GMA
0.55mm 50Vdc
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 1.0×0.5mm)
Part number # indicates the package specification code.
80
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
C02E.pdf
Mar.13,2020
GRM
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Q and High Power Chip Multilayer Ceramic Capacitors for General Purpose
GQM Series
GR3
WEB
1
Mainly ideal for base stations of mobile communication devices and temperature compensation
of related modules.
This product is ideal for temperature compensation of high frequency circuits, such as resonant circuits,
tuning circuits, and impedance matching circuits where the operating characteristics of the device are greatly
affected by the capacitance fluctuation.
Ceramic
GA2
Internal Electrodes (Cu)
GQM
Features
GJM
GR4
GRJ
High Frequency Capacitor Ideal for PA Design of Base Stations
Ni/Sn Plated Layer
GA3
GB
Foundation Electrode Layer
10000
1000
100
100
500
1000 1500 2000
Frequency (MHz)
2500
3000
1
100
200
300
400
500
Frequency (MHz)
600
700
Can be used for tight tolerance.
to 0.9pF
Standard Capacitance Tolerance
(Capacitance Tolerance Symbol)
±0.1pF (B)
Narrow Capacitance Tolerance
(Capacitance Tolerance Symbol)
±0.05pF (W)
±0.25pF (C)
±0.05pF (W), ±0.1pF (B)
±0.5pF (D)
±0.05pF (W), ±0.1pF (B), ±0.25pF (C)
10pF to
±5% (J)
±2% (G)
GMA
1.0 to 5.0pF
5.1 to 9.9pF
KR3
Capacitance Range
KRM
In addition to standard tolerance, the allowable range of this product is also suitable for the following narrow tolerance.
Capacitance
Main Applications
e
g
100Vdc to 500Vdc
0.10pF to 510pF
Measuring instruments, other ultra compact/thin devices
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
L
W
e
GMD
Rated Voltage
1.0×0.5mm to 2.8×2.8mm
T
!Caution
/Notice
Specifications
Size (mm)
LLR
0
LLM
10
10
3
LLA
Q
Q
1000
1
New Material GQM
Conventional Material GRM
1608 (in mm)/0603 (in inch)/10pF/50V
New Material GQM
Conventional Material GRM
1608 (in mm)/0603 (in inch)/10pF/50V
GA3
GF
High Q and low ESR were achieved at a high frequency by adopting ceramic material as the dielectric material
which enables an extremely low loss at high frequency, and base metal electrodes as the internal electrodes.
LLL
High Q and low ESR in VHF, UHF and microwave frequency bands.
NFM
2
GA3
GD
81
±0.1pF GQM1555C2DR40BB01#
5.6pF
±0.1pF GQM1555C2DR50BB01#
6.0pF
0.60pF
±0.1pF GQM1555C2DR60BB01#
6.2pF
±0.1pF GQM1555C2DR70BB01#
6.8pF
±0.1pF GQM1555C2DR75BB01#
7.0pF
±0.1pF GQM1555C2DR80BB01#
7.5pF
±0.1pF GQM1555C2DR90BB01#
8.0pF
±0.1pF GQM1555C2D1R0BB01#
8.2pF
±0.1pF GQM1555C2D1R1BB01#
9.0pF
±0.1pF GQM1555C2D1R2BB01#
9.1pF
±0.1pF GQM1555C2D1R3BB01#
10pF
±2%
GQM1555C2D100GB01#
±5%
GQM1555C2D100JB01#
11pF
±2%
GQM1555C2D110GB01#
±5%
GQM1555C2D110JB01#
±2%
GQM1555C2D120GB01#
±5%
GQM1555C2D120JB01#
±2%
GQM1555C2D130GB01#
±5%
GQM1555C2D130JB01#
±2%
GQM1555C2D150GB01#
±5%
GQM1555C2D150JB01#
±2%
GQM1555C2D160GB01#
±5%
GQM1555C2D160JB01#
±2%
GQM1555C2D180GB01#
±5%
GQM1555C2D180JB01#
±2%
GQM1555C2D200GB01#
±5%
GQM1555C2D200JB01#
22pF
±2%
GQM1555C2D220GB01#
±5%
GQM1555C2D220JB01#
24pF
±2%
GQM1555C2D240GB01#
±5%
GQM1555C2D240JB01#
±2%
GQM1555C2D270GB01#
±5%
GQM1555C2D270JB01#
±2%
GQM1555C2D300GB01#
±5%
GQM1555C2D300JB01#
±2%
GQM1555C2D330GB01#
±5%
GQM1555C2D330JB01#
±2%
GQM1555C2A360GB01#
±5%
GQM1555C2A360JB01#
±0.25pF GQM1555C2D1R3CB01#
1.5pF
±0.1pF GQM1555C2D1R5BB01#
±0.25pF GQM1555C2D1R5CB01#
1.6pF
±0.1pF GQM1555C2D1R6BB01#
12pF
±0.25pF GQM1555C2D1R6CB01#
1.8pF
±0.1pF GQM1555C2D1R8BB01#
13pF
±0.25pF GQM1555C2D1R8CB01#
2.0pF
±0.1pF GQM1555C2D2R0BB01#
15pF
±0.25pF GQM1555C2D2R0CB01#
2.2pF
±0.1pF GQM1555C2D2R2BB01#
16pF
±0.25pF GQM1555C2D2R2CB01#
2.4pF
±0.1pF GQM1555C2D2R4BB01#
18pF
±0.25pF GQM1555C2D2R4CB01#
2.7pF
±0.1pF GQM1555C2D2R7BB01#
20pF
±0.25pF GQM1555C2D2R7CB01#
3.0pF
±0.1pF GQM1555C2D3R0BB01#
±0.25pF GQM1555C2D3R0CB01#
3.3pF
±0.1pF GQM1555C2D3R3BB01#
±0.25pF GQM1555C2D3R3CB01#
3.6pF
±0.1pF GQM1555C2D3R6BB01#
27pF
±0.25pF GQM1555C2D3R6CB01#
3.9pF
±0.1pF GQM1555C2D3R9BB01#
30pF
±0.25pF GQM1555C2D3R9CB01#
4.0pF
±0.1pF GQM1555C2D4R0BB01#
33pF
±0.25pF GQM1555C2D4R0CB01#
4.3pF
±0.1pF GQM1555C2D4R3BB01#
±0.25pF GQM1555C2D4R3CB01#
±0.1pF GQM1555C2D9R1BB01#
±0.25pF GQM1555C2D9R1CB01#
±0.25pF GQM1555C2D1R2CB01#
1.3pF
±0.1pF GQM1555C2D9R0BB01#
GRJ
GR4
±0.25pF GQM1555C2D9R0CB01#
±0.25pF GQM1555C2D1R1CB01#
1.2pF
±0.1pF GQM1555C2D8R2BB01#
±0.25pF GQM1555C2D8R2CB01#
±0.25pF GQM1555C2D1R0CB01#
1.1pF
±0.1pF GQM1555C2D8R0BB01#
±0.25pF GQM1555C2D8R0CB01#
±0.25pF GQM1555C2DR90CB01#
1.0pF
±0.1pF GQM1555C2D7R5BB01#
±0.25pF GQM1555C2D7R5CB01#
±0.25pF GQM1555C2DR80CB01#
0.90pF
±0.1pF GQM1555C2D7R0BB01#
±0.25pF GQM1555C2D7R0CB01#
±0.25pF GQM1555C2DR75CB01#
0.80pF
±0.1pF GQM1555C2D6R8BB01#
±0.25pF GQM1555C2D6R8CB01#
±0.25pF GQM1555C2DR70CB01#
0.75pF
±0.1pF GQM1555C2D6R2BB01#
±0.25pF GQM1555C2D6R2CB01#
±0.25pF GQM1555C2DR60CB01#
0.70pF
±0.1pF GQM1555C2D6R0BB01#
±0.25pF GQM1555C2D6R0CB01#
±0.25pF GQM1555C2DR50CB01#
GA2
0.50pF
±0.1pF GQM1555C2D5R6BB01#
±0.25pF GQM1555C2D5R6CB01#
±0.25pF GQM1555C2DR40CB01#
GA3
GB
0.40pF
±0.1pF GQM1555C2D5R1BB01#
±0.25pF GQM1555C2D5R1CB01#
GJM
5.1pF
GQM
±0.1pF GQM1555C2DR30BB01#
±0.25pF GQM1555C2DR30CB01#
GA3
GD
0.30pF
±0.1pF GQM1555C2D5R0BB01#
±0.25pF GQM1555C2D5R0CB01#
GA3
GF
±0.1pF GQM1555C2DR20BB01#
±0.25pF GQM1555C2D4R7CB01#
5.0pF
100Vdc C0G
36pF
Part number # indicates the package specification code.
LLL
0.20pF
±0.1pF GQM1555C2D4R7BB01#
LLA
±0.1pF GQM1555C2DR10BB01#
4.7pF
LLM
0.10pF
0.55mm 200Vdc C0G
LLR
Part Number
NFM
Tol.
Part Number
KRM
0.55mm 200Vdc C0G
Cap.
Tol.
KR3
Rated
TC
Voltage Code
Cap.
GMA
T
max.
Rated
TC
Voltage Code
GMD
T
max.
1.0×0.5mm
Part Number List
!Caution
/Notice
GQM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
GRM
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GR3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
82
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GQM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
±0.25pF GQM1875C2E7R0CB12#
7.5pF
±0.25pF GQM1875C2E7R5CB12#
8.0pF
±0.25pF GQM1875C2E8R0CB12#
±0.5pF GQM1875C2E6R8DB12#
±0.5pF GQM1875C2E7R0DB12#
1.6×0.8mm
T
max.
±0.5pF GQM1875C2E7R5DB12#
Rated
TC
Voltage Code
Cap.
0.8mm 250Vdc C0G
1.0pF
Tol.
Part Number
±0.5pF GQM1875C2E8R0DB12#
±0.1pF GQM1875C2E1R0BB12#
8.2pF
±0.25pF GQM1875C2E8R2CB12#
9.0pF
±0.25pF GQM1875C2E9R0CB12#
9.1pF
±0.25pF GQM1875C2E9R1CB12#
±0.5pF GQM1875C2E8R2DB12#
±0.25pF GQM1875C2E1R0CB12#
1.1pF
±0.1pF GQM1875C2E1R1BB12#
±0.5pF GQM1875C2E9R0DB12#
±0.25pF GQM1875C2E1R1CB12#
1.2pF
±0.1pF GQM1875C2E1R2BB12#
±0.5pF GQM1875C2E9R1DB12#
±0.25pF GQM1875C2E1R2CB12#
1.3pF
±0.1pF GQM1875C2E1R3BB12#
±2%
GQM1875C2E100GB12#
±5%
GQM1875C2E100JB12#
±2%
GQM1875C2E110GB12#
±5%
GQM1875C2E110JB12#
12pF
±2%
GQM1875C2E120GB12#
±5%
GQM1875C2E120JB12#
13pF
±2%
GQM1875C2E130GB12#
±5%
GQM1875C2E130JB12#
±2%
GQM1875C2E150GB12#
±5%
GQM1875C2E150JB12#
±2%
GQM1875C2E160GB12#
±5%
GQM1875C2E160JB12#
±2%
GQM1875C2E180GB12#
±5%
GQM1875C2E180JB12#
20pF
±2%
GQM1875C2E200GB12#
±5%
GQM1875C2E200JB12#
22pF
±2%
GQM1875C2E220GB12#
±5%
GQM1875C2E220JB12#
±2%
GQM1875C2E240GB12#
±5%
GQM1875C2E240JB12#
27pF
±2%
GQM1875C2E270GB12#
±5%
GQM1875C2E270JB12#
30pF
±2%
GQM1875C2E300GB12#
±5%
GQM1875C2E300JB12#
±2%
GQM1875C2E330GB12#
±5%
GQM1875C2E330JB12#
±2%
GQM1875C2E360GB12#
±5%
GQM1875C2E360JB12#
±2%
GQM1875C2E390GB12#
±5%
GQM1875C2E390JB12#
43pF
±2%
GQM1875C2E430GB12#
±5%
GQM1875C2E430JB12#
47pF
±2%
GQM1875C2E470GB12#
±5%
GQM1875C2E470JB12#
10pF
±0.25pF GQM1875C2E1R3CB12#
1.5pF
±0.1pF GQM1875C2E1R5BB12#
11pF
±0.25pF GQM1875C2E1R5CB12#
1.6pF
±0.1pF GQM1875C2E1R6BB12#
±0.25pF GQM1875C2E1R6CB12#
1.8pF
±0.1pF GQM1875C2E1R8BB12#
±0.25pF GQM1875C2E1R8CB12#
2.0pF
±0.1pF GQM1875C2E2R0BB12#
15pF
±0.25pF GQM1875C2E2R0CB12#
2.2pF
±0.1pF GQM1875C2E2R2BB12#
16pF
±0.25pF GQM1875C2E2R2CB12#
2.4pF
±0.1pF GQM1875C2E2R4BB12#
18pF
±0.25pF GQM1875C2E2R4CB12#
2.7pF
±0.1pF GQM1875C2E2R7BB12#
±0.25pF GQM1875C2E2R7CB12#
3.0pF
±0.1pF GQM1875C2E3R0BB12#
±0.25pF GQM1875C2E3R0CB12#
3.3pF
±0.1pF GQM1875C2E3R3BB12#
24pF
±0.25pF GQM1875C2E3R3CB12#
3.6pF
±0.1pF GQM1875C2E3R6BB12#
±0.25pF GQM1875C2E3R6CB12#
3.9pF
±0.1pF GQM1875C2E3R9BB12#
±0.25pF GQM1875C2E3R9CB12#
4.0pF
±0.1pF GQM1875C2E4R0BB12#
33pF
±0.25pF GQM1875C2E4R0CB12#
4.3pF
±0.1pF GQM1875C2E4R3BB12#
36pF
±0.25pF GQM1875C2E4R3CB12#
4.7pF
±0.1pF GQM1875C2E4R7BB12#
39pF
±0.25pF GQM1875C2E4R7CB12#
5.0pF
±0.1pF GQM1875C2E5R0BB12#
±0.25pF GQM1875C2E5R0CB12#
5.1pF
±0.25pF GQM1875C2E5R1CB12#
±0.5pF GQM1875C2E5R1DB12#
5.6pF
±0.25pF GQM1875C2E5R6CB12#
6.0pF
±0.25pF GQM1875C2E6R0CB12#
GRJ
7.0pF
GR4
GQM1555C2A470JB01#
±0.5pF GQM1875C2E6R2DB12#
GJM
GQM1555C2A470GB01#
±5%
±0.25pF GQM1875C2E6R8CB12#
GQM
±2%
47pF
6.8pF
GA2
GQM1555C2A430JB01#
±0.25pF GQM1875C2E6R2CB12#
X8G
1.0pF
±0.1pF GQM1875G2E1R0BB12#
GA3
GB
±5%
6.2pF
GA3
GD
GQM1555C2A430GB01#
±0.5pF GQM1875C2E6R0DB12#
GA3
GF
GQM1555C2A390JB01#
±2%
6.0pF
LLL
±5%
43pF
0.8mm 250Vdc C0G
Part Number
LLA
GQM1555C2A390GB01#
Tol.
LLM
±2%
Cap.
LLR
39pF
Rated
TC
Voltage Code
NFM
0.55mm 100Vdc C0G
T
max.
KRM
Part Number
KR3
Tol.
GMA
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 1.0×0.5mm)
±0.25pF GQM1875G2E1R0CB12#
±0.5pF GQM1875C2E5R6DB12#
1.1pF
±0.1pF GQM1875G2E1R1BB12#
Part number # indicates the package specification code.
83
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GQM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
±2%
GQM1875G2E100GB12#
±5%
GQM1875G2E100JB12#
11pF
±2%
GQM1875G2E110GB12#
±5%
GQM1875G2E110JB12#
12pF
±2%
GQM1875G2E120GB12#
±5%
GQM1875G2E120JB12#
±2%
GQM1875G2E130GB12#
±5%
GQM1875G2E130JB12#
±2%
GQM1875G2E150GB12#
±5%
GQM1875G2E150JB12#
±2%
GQM1875G2E160GB12#
±5%
GQM1875G2E160JB12#
±2%
GQM1875G2E180GB12#
±5%
GQM1875G2E180JB12#
±2%
GQM1875G2E200GB12#
±5%
GQM1875G2E200JB12#
±2%
GQM1875G2E220GB12#
±5%
GQM1875G2E220JB12#
24pF
±2%
GQM1875G2E240GB12#
±5%
GQM1875G2E240JB12#
27pF
±2%
GQM1875G2E270GB12#
±5%
GQM1875G2E270JB12#
±2%
GQM1875G2E300GB12#
±5%
GQM1875G2E300JB12#
Tol.
Part Number
10pF
±0.25pF GQM1875G2E1R3CB12#
±0.1pF GQM1875G2E1R5BB12#
±0.25pF GQM1875G2E1R5CB12#
1.6pF
±0.1pF GQM1875G2E1R6BB12#
±0.25pF GQM1875G2E1R6CB12#
1.8pF
±0.1pF GQM1875G2E1R8BB12#
13pF
±0.25pF GQM1875G2E1R8CB12#
2.0pF
±0.1pF GQM1875G2E2R0BB12#
15pF
±0.25pF GQM1875G2E2R0CB12#
2.2pF
±0.1pF GQM1875G2E2R2BB12#
16pF
±0.25pF GQM1875G2E2R2CB12#
2.4pF
±0.1pF GQM1875G2E2R4BB12#
18pF
±0.25pF GQM1875G2E2R4CB12#
2.7pF
±0.1pF GQM1875G2E2R7BB12#
20pF
±0.25pF GQM1875G2E2R7CB12#
3.0pF
±0.1pF GQM1875G2E3R0BB12#
22pF
±0.25pF GQM1875G2E3R0CB12#
3.3pF
±0.1pF GQM1875G2E3R3BB12#
±0.25pF GQM1875G2E3R3CB12#
3.6pF
±0.1pF GQM1875G2E3R6BB12#
±0.25pF GQM1875G2E3R6CB12#
3.9pF
±0.1pF GQM1875G2E3R9BB12#
30pF
4.0pF
±0.1pF GQM1875G2E4R0BB12#
±0.25pF GQM1875G2E4R0CB12#
4.3pF
±0.1pF GQM1875G2E4R3BB12#
±0.25pF GQM1875G2E4R3CB12#
4.7pF
±0.1pF GQM1875G2E4R7BB12#
±0.25pF GQM1875G2E4R7CB12#
5.0pF
±0.25pF GQM1875G2E5R0CB12#
±0.25pF GQM1875G2E5R1CB12#
5.6pF
±0.25pF GQM1875G2E5R6CB12#
6.0pF
±0.25pF GQM1875G2E6R0CB12#
6.2pF
±0.25pF GQM1875G2E6R2CB12#
±0.5pF GQM1875G2E5R1DB12#
±0.5pF GQM1875G2E5R6DB12#
±0.5pF GQM1875G2E6R0DB12#
±0.5pF GQM1875G2E6R2DB12#
T
max.
Rated
TC
Voltage Code
Cap.
1.0mm 500Vdc X8G
1.0pF
7.0pF
±0.25pF GQM1875G2E7R0CB12#
7.5pF
±0.25pF GQM1875G2E7R5CB12#
8.0pF
±0.25pF GQM1875G2E8R0CB12#
8.2pF
±0.25pF GQM1875G2E8R2CB12#
9.0pF
±0.25pF GQM1875G2E9R0CB12#
±0.5pF GQM1875G2E7R0DB12#
±0.5pF GQM1875G2E7R5DB12#
±0.5pF GQM1875G2E8R0DB12#
±0.5pF GQM1875G2E8R2DB12#
±0.1pF GQM2195G2H1R0BB12#
±0.25pF GQM2195G2H1R0CB12#
1.1pF
±0.1pF GQM2195G2H1R1BB12#
±0.25pF GQM2195G2H1R1CB12#
1.2pF
±0.1pF GQM2195G2H1R2BB12#
±0.25pF GQM2195G2H1R2CB12#
1.3pF
±0.1pF GQM2195G2H1R3BB12#
±0.25pF GQM2195G2H1R3CB12#
1.5pF
±0.1pF GQM2195G2H1R5BB12#
±0.25pF GQM2195G2H1R5CB12#
1.6pF
±0.25pF GQM1875G2E6R8CB12#
±0.5pF GQM1875G2E6R8DB12#
GRJ
2.0×1.25mm
±0.1pF GQM1875G2E5R0BB12#
5.1pF
6.8pF
LLA
±0.25pF GQM1875G2E3R9CB12#
LLM
1.5pF
GR4
±0.5pF GQM1875G2E9R1DB12#
±0.1pF GQM1875G2E1R3BB12#
LLR
1.3pF
GJM
±0.25pF GQM1875G2E9R1CB12#
GQM
9.1pF
±0.1pF GQM1875G2E1R2BB12#
±0.25pF GQM1875G2E1R2CB12#
GA2
±0.5pF GQM1875G2E9R0DB12#
GA3
GB
9.0pF
Part Number
GA3
GD
0.8mm 250Vdc X8G
Tol.
GA3
GF
Cap.
LLL
Rated
TC
Voltage Code
NFM
1.2pF
±0.25pF GQM1875G2E1R1CB12#
T
max.
KRM
1.1pF
Part Number
±0.1pF GQM2195G2H1R6BB12#
KR3
0.8mm 250Vdc X8G
Tol.
±0.25pF GQM2195G2H1R6CB12#
1.8pF
±0.1pF GQM2195G2H1R8BB12#
±0.25pF GQM2195G2H1R8CB12#
2.0pF
±0.1pF GQM2195G2H2R0BB12#
±0.25pF GQM2195G2H2R0CB12#
2.2pF
±0.1pF GQM2195G2H2R2BB12#
±0.25pF GQM2195G2H2R2CB12#
2.4pF
±0.1pF GQM2195G2H2R4BB12#
±0.25pF GQM2195G2H2R4CB12#
2.7pF
GMA
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 1.6×0.8mm)
±0.1pF GQM2195G2H2R7BB12#
±0.25pF GQM2195G2H2R7CB12#
Part number # indicates the package specification code.
84
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GQM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Cap.
Tol.
Part Number
1.0mm 500Vdc X8G
22pF
±2%
GQM2195G2H220GB12#
±5%
GQM2195G2H220JB12#
250Vdc C0G
1.0pF
±0.25pF GQM2195G2H3R0CB12#
1.2pF
1.3pF
±0.1pF GQM2195G2H4R3BB12#
1.5pF
±0.25pF GQM2195G2H4R3CB12#
4.7pF
±0.1pF GQM2195G2H4R7BB12#
±0.25pF GQM2195C2E1R5CB12#
1.6pF
±0.25pF GQM2195G2H4R7CB12#
5.0pF
±0.1pF GQM2195G2H5R0BB12#
±0.25pF GQM2195G2H5R1CB12#
5.6pF
±0.25pF GQM2195G2H5R6CB12#
1.8pF
2.0pF
±0.25pF GQM2195G2H6R2CB12#
2.4pF
±0.25pF GQM2195G2H6R8CB12#
2.7pF
±0.25pF GQM2195G2H7R0CB12#
7.5pF
±0.25pF GQM2195G2H7R5CB12#
3.0pF
3.3pF
±0.25pF GQM2195G2H8R2CB12#
3.9pF
±0.25pF GQM2195G2H9R0CB12#
4.0pF
±0.25pF GQM2195G2H9R1CB12#
4.3pF
±2%
GQM2195G2H100GB12#
±5%
GQM2195G2H100JB12#
±2%
GQM2195G2H110GB12#
±5%
GQM2195G2H110JB12#
12pF
±2%
GQM2195G2H120GB12#
±5%
GQM2195G2H120JB12#
13pF
±2%
GQM2195G2H130GB12#
±5%
GQM2195G2H130JB12#
15pF
±2%
GQM2195G2H150GB12#
±5%
GQM2195G2H150JB12#
±2%
GQM2195G2H160GB12#
±5%
GQM2195G2H160JB12#
18pF
±2%
GQM2195G2H180GB12#
±5%
GQM2195G2H180JB12#
20pF
±2%
GQM2195G2H200GB12#
±5%
GQM2195G2H200JB12#
11pF
16pF
±0.1pF GQM2195C2E4R3BB12#
±0.25pF GQM2195C2E4R3CB12#
4.7pF
±0.5pF GQM2195G2H9R1DB12#
10pF
±0.1pF GQM2195C2E4R0BB12#
±0.25pF GQM2195C2E4R0CB12#
±0.5pF GQM2195G2H9R0DB12#
9.1pF
±0.1pF GQM2195C2E3R9BB12#
±0.25pF GQM2195C2E3R9CB12#
±0.5pF GQM2195G2H8R2DB12#
9.0pF
±0.1pF GQM2195C2E3R6BB12#
±0.25pF GQM2195C2E3R6CB12#
±0.5pF GQM2195G2H8R0DB12#
8.2pF
±0.1pF GQM2195C2E3R3BB12#
±0.25pF GQM2195C2E3R3CB12#
3.6pF
±0.5pF GQM2195G2H7R5DB12#
±0.25pF GQM2195G2H8R0CB12#
±0.1pF GQM2195C2E3R0BB12#
±0.25pF GQM2195C2E3R0CB12#
±0.5pF GQM2195G2H7R0DB12#
8.0pF
±0.1pF GQM2195C2E2R7BB12#
±0.25pF GQM2195C2E2R7CB12#
±0.5pF GQM2195G2H6R8DB12#
7.0pF
±0.1pF GQM2195C2E2R4BB12#
±0.25pF GQM2195C2E2R4CB12#
±0.5pF GQM2195G2H6R2DB12#
6.8pF
±0.1pF GQM2195C2E2R2BB12#
±0.25pF GQM2195C2E2R2CB12#
±0.5pF GQM2195G2H6R0DB12#
6.2pF
±0.1pF GQM2195C2E2R0BB12#
±0.25pF GQM2195C2E2R0CB12#
2.2pF
±0.5pF GQM2195G2H5R6DB12#
±0.25pF GQM2195G2H6R0CB12#
±0.1pF GQM2195C2E1R8BB12#
±0.25pF GQM2195C2E1R8CB12#
±0.5pF GQM2195G2H5R1DB12#
6.0pF
±0.1pF GQM2195C2E1R6BB12#
±0.25pF GQM2195C2E1R6CB12#
±0.25pF GQM2195G2H5R0CB12#
5.1pF
±0.1pF GQM2195C2E1R5BB12#
GA2
4.3pF
±0.1pF GQM2195C2E1R3BB12#
±0.25pF GQM2195C2E1R3CB12#
GA3
GB
±0.1pF GQM2195G2H4R0BB12#
±0.25pF GQM2195G2H4R0CB12#
GA3
GD
4.0pF
±0.1pF GQM2195C2E1R2BB12#
±0.25pF GQM2195C2E1R2CB12#
GA3
GF
±0.1pF GQM2195G2H3R9BB12#
±0.25pF GQM2195G2H3R9CB12#
LLL
3.9pF
±0.1pF GQM2195C2E1R1BB12#
±0.25pF GQM2195C2E1R1CB12#
GJM
±0.25pF GQM2195G2H3R6CB12#
GR4
±0.25pF GQM2195C2E1R0CB12#
1.1pF
LLA
±0.1pF GQM2195G2H3R6BB12#
GQM
±0.25pF GQM2195G2H3R3CB12#
3.6pF
±0.1pF GQM2195C2E1R0BB12#
LLM
±0.1pF GQM2195G2H3R3BB12#
LLR
3.3pF
GRJ
Rated
TC
Voltage Code
±0.1pF GQM2195C2E4R7BB12#
NFM
±0.1pF GQM2195G2H3R0BB12#
T
max.
±0.25pF GQM2195C2E4R7CB12#
5.0pF
±0.1pF GQM2195C2E5R0BB12#
±0.25pF GQM2195C2E5R0CB12#
5.1pF
±0.25pF GQM2195C2E5R1CB12#
5.6pF
±0.25pF GQM2195C2E5R6CB12#
6.0pF
±0.25pF GQM2195C2E6R0CB12#
6.2pF
±0.25pF GQM2195C2E6R2CB12#
±0.5pF GQM2195C2E5R1DB12#
KRM
3.0pF
Part Number
KR3
1.0mm 500Vdc X8G
Tol.
±0.5pF GQM2195C2E5R6DB12#
±0.5pF GQM2195C2E6R0DB12#
±0.5pF GQM2195C2E6R2DB12#
6.8pF
±0.25pF GQM2195C2E6R8CB12#
7.0pF
±0.25pF GQM2195C2E7R0CB12#
7.5pF
±0.25pF GQM2195C2E7R5CB12#
±0.5pF GQM2195C2E6R8DB12#
±0.5pF GQM2195C2E7R0DB12#
GMA
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 2.0×1.25mm)
±0.5pF GQM2195C2E7R5DB12#
Part number # indicates the package specification code.
85
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GQM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
±2%
GQM2195C2E910GB12#
±5%
GQM2195C2E910JB12#
100pF
±2%
GQM2195C2E101GB12#
±5%
GQM2195C2E101JB12#
±0.5pF GQM2195C2E8R0DB12#
±0.5pF GQM2195C2E8R2DB12#
1.0pF
±0.5pF GQM2195C2E9R0DB12#
1.1pF
±0.5pF GQM2195C2E9R1DB12#
GQM2195C2E100GB12#
±5%
GQM2195C2E100JB12#
11pF
±2%
GQM2195C2E110GB12#
±5%
GQM2195C2E110JB12#
12pF
±2%
GQM2195C2E120GB12#
±5%
GQM2195C2E120JB12#
±2%
GQM2195C2E130GB12#
±5%
GQM2195C2E130JB12#
15pF
±2%
GQM2195C2E150GB12#
±5%
GQM2195C2E150JB12#
16pF
±2%
GQM2195C2E160GB12#
±5%
GQM2195C2E160JB12#
±2%
GQM2195C2E180GB12#
±5%
GQM2195C2E180JB12#
±2%
GQM2195C2E200GB12#
±5%
GQM2195C2E200JB12#
±2%
GQM2195C2E220GB12#
±5%
GQM2195C2E220JB12#
24pF
±2%
GQM2195C2E240GB12#
±5%
GQM2195C2E240JB12#
27pF
±2%
GQM2195C2E270GB12#
±5%
GQM2195C2E270JB12#
±2%
GQM2195C2E300GB12#
±5%
GQM2195C2E300JB12#
±2%
GQM2195C2E330GB12#
±5%
GQM2195C2E330JB12#
±2%
GQM2195C2E360GB12#
±5%
GQM2195C2E360JB12#
±2%
GQM2195C2E390GB12#
±5%
GQM2195C2E390JB12#
±2%
GQM2195C2E430GB12#
±5%
GQM2195C2E430JB12#
±2%
GQM2195C2E470GB12#
±5%
GQM2195C2E470JB12#
51pF
±2%
GQM2195C2E510GB12#
±5%
GQM2195C2E510JB12#
56pF
±2%
GQM2195C2E560GB12#
±5%
GQM2195C2E560JB12#
62pF
±2%
GQM2195C2E620GB12#
±5%
GQM2195C2E620JB12#
±2%
GQM2195C2E680GB12#
±5%
GQM2195C2E680JB12#
75pF
±2%
GQM2195C2E750GB12#
±5%
GQM2195C2E750JB12#
82pF
±2%
GQM2195C2E820GB12#
±5%
GQM2195C2E820JB12#
13pF
18pF
20pF
22pF
30pF
33pF
36pF
39pF
43pF
47pF
68pF
1.2pF
±0.1pF GQM2195G2E1R2BB12#
±0.25pF GQM2195G2E1R2CB12#
1.3pF
±0.1pF GQM2195G2E1R3BB12#
±0.25pF GQM2195G2E1R3CB12#
1.5pF
±0.1pF GQM2195G2E1R5BB12#
±0.25pF GQM2195G2E1R5CB12#
1.6pF
±0.1pF GQM2195G2E1R6BB12#
±0.25pF GQM2195G2E1R6CB12#
1.8pF
GA2
±2%
10pF
±0.1pF GQM2195G2E1R1BB12#
±0.25pF GQM2195G2E1R1CB12#
±0.1pF GQM2195G2E1R8BB12#
GA3
GB
±0.25pF GQM2195C2E9R1CB12#
±0.25pF GQM2195G2E1R0CB12#
±0.25pF GQM2195G2E1R8CB12#
2.0pF
±0.1pF GQM2195G2E2R0BB12#
±0.25pF GQM2195G2E2R0CB12#
2.2pF
±0.1pF GQM2195G2E2R2BB12#
±0.25pF GQM2195G2E2R2CB12#
2.4pF
GA3
GD
9.1pF
±0.1pF GQM2195G2E1R0BB12#
±0.1pF GQM2195G2E2R4BB12#
GA3
GF
X8G
±0.25pF GQM2195G2E2R4CB12#
2.7pF
±0.1pF GQM2195G2E2R7BB12#
±0.25pF GQM2195G2E2R7CB12#
3.0pF
±0.1pF GQM2195G2E3R0BB12#
±0.25pF GQM2195G2E3R0CB12#
3.3pF
±0.1pF GQM2195G2E3R3BB12#
±0.25pF GQM2195G2E3R3CB12#
3.6pF
LLL
±0.25pF GQM2195C2E9R0CB12#
LLA
9.0pF
GRJ
91pF
GR4
1.0mm 250Vdc C0G
GJM
Part Number
GQM
Tol.
±0.1pF GQM2195G2E3R6BB12#
LLM
±0.25pF GQM2195C2E8R2CB12#
Cap.
±0.25pF GQM2195G2E3R6CB12#
3.9pF
±0.1pF GQM2195G2E3R9BB12#
±0.25pF GQM2195G2E3R9CB12#
4.0pF
±0.1pF GQM2195G2E4R0BB12#
±0.25pF GQM2195G2E4R0CB12#
4.3pF
LLR
8.2pF
Rated
TC
Voltage Code
±0.1pF GQM2195G2E4R3BB12#
NFM
±0.25pF GQM2195C2E8R0CB12#
T
max.
±0.25pF GQM2195G2E4R3CB12#
4.7pF
±0.1pF GQM2195G2E4R7BB12#
±0.25pF GQM2195G2E4R7CB12#
5.0pF
KRM
8.0pF
Part Number
±0.1pF GQM2195G2E5R0BB12#
±0.25pF GQM2195G2E5R0CB12#
5.1pF
±0.25pF GQM2195G2E5R1CB12#
5.6pF
±0.25pF GQM2195G2E5R6CB12#
6.0pF
±0.25pF GQM2195G2E6R0CB12#
KR3
1.0mm 250Vdc C0G
Tol.
±0.5pF GQM2195G2E5R1DB12#
±0.5pF GQM2195G2E5R6DB12#
±0.5pF GQM2195G2E6R0DB12#
6.2pF
±0.25pF GQM2195G2E6R2CB12#
6.8pF
±0.25pF GQM2195G2E6R8CB12#
7.0pF
±0.25pF GQM2195G2E7R0CB12#
±0.5pF GQM2195G2E6R2DB12#
±0.5pF GQM2195G2E6R8DB12#
GMA
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 2.0×1.25mm)
±0.5pF GQM2195G2E7R0DB12#
Part number # indicates the package specification code.
86
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GQM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
82pF
±2%
GQM2195G2E820GB12#
±5%
GQM2195G2E820JB12#
Tol.
Part Number
±0.5pF GQM2195G2E7R5DB12#
±0.5pF GQM2195G2E9R0DB12#
±0.5pF GQM2195G2E9R1DB12#
10pF
±2%
GQM2195G2E100GB12#
±5%
GQM2195G2E100JB12#
11pF
±2%
GQM2195G2E110GB12#
±5%
GQM2195G2E110JB12#
12pF
±2%
GQM2195G2E120GB12#
±5%
GQM2195G2E120JB12#
13pF
±2%
GQM2195G2E130GB12#
±5%
GQM2195G2E130JB12#
15pF
±2%
GQM2195G2E150GB12#
±5%
GQM2195G2E150JB12#
16pF
±2%
GQM2195G2E160GB12#
±5%
GQM2195G2E160JB12#
±2%
GQM2195G2E180GB12#
±5%
GQM2195G2E180JB12#
20pF
±2%
GQM2195G2E200GB12#
±5%
GQM2195G2E200JB12#
22pF
±2%
GQM2195G2E220GB12#
±5%
GQM2195G2E220JB12#
24pF
±2%
GQM2195G2E240GB12#
±5%
GQM2195G2E240JB12#
27pF
±2%
GQM2195G2E270GB12#
±5%
GQM2195G2E270JB12#
±2%
GQM2195G2E300GB12#
±5%
GQM2195G2E300JB12#
33pF
±2%
GQM2195G2E330GB12#
±5%
GQM2195G2E330JB12#
36pF
±2%
GQM2195G2E360GB12#
±5%
GQM2195G2E360JB12#
±2%
GQM2195G2E390GB12#
±5%
GQM2195G2E390JB12#
43pF
±2%
GQM2195G2E430GB12#
±5%
GQM2195G2E430JB12#
47pF
±2%
GQM2195G2E470GB12#
±5%
GQM2195G2E470JB12#
51pF
±2%
GQM2195G2E510GB12#
±5%
GQM2195G2E510JB12#
56pF
±2%
GQM2195G2E560GB12#
±5%
GQM2195G2E560JB12#
±2%
GQM2195G2E620GB12#
±5%
GQM2195G2E620JB12#
±2%
GQM2195G2E680GB12#
±5%
GQM2195G2E680JB12#
±2%
GQM2195G2E750GB12#
±5%
GQM2195G2E750JB12#
18pF
30pF
39pF
62pF
68pF
75pF
GR4
Cap.
1.35mm 500Vdc C0G
1.0pF
±0.1pF GQM22M5C2H1R0BB01#
±0.25pF GQM22M5C2H1R0CB01#
1.1pF
±0.1pF GQM22M5C2H1R1BB01#
±0.25pF GQM22M5C2H1R1CB01#
1.2pF
±0.1pF GQM22M5C2H1R2BB01#
±0.25pF GQM22M5C2H1R2CB01#
1.3pF
GJM
±0.25pF GQM2195G2E9R1CB12#
Rated
TC
Voltage Code
GQM
9.1pF
T
max.
±0.1pF GQM22M5C2H1R3BB01#
GA2
±0.25pF GQM2195G2E9R0CB12#
±0.25pF GQM22M5C2H1R3CB01#
1.5pF
±0.1pF GQM22M5C2H1R5BB01#
±0.25pF GQM22M5C2H1R5CB01#
1.6pF
±0.1pF GQM22M5C2H1R6BB01#
±0.25pF GQM22M5C2H1R6CB01#
1.8pF
GA3
GB
9.0pF
±0.1pF GQM22M5C2H1R8BB01#
GA3
GD
±0.5pF GQM2195G2E8R2DB12#
2.8×2.8mm
±0.25pF GQM22M5C2H1R8CB01#
2.0pF
±0.1pF GQM22M5C2H2R0BB01#
±0.25pF GQM22M5C2H2R0CB01#
2.2pF
±0.1pF GQM22M5C2H2R2BB01#
±0.25pF GQM22M5C2H2R2CB01#
2.4pF
GA3
GF
±0.5pF GQM2195G2E8R0DB12#
GRJ
1.0mm 250Vdc X8G
±0.1pF GQM22M5C2H2R4BB01#
LLL
±0.25pF GQM2195G2E8R2CB12#
Part Number
±0.25pF GQM22M5C2H2R4CB01#
2.7pF
±0.1pF GQM22M5C2H2R7BB01#
LLA
8.2pF
Tol.
±0.25pF GQM22M5C2H2R7CB01#
3.0pF
±0.1pF GQM22M5C2H3R0BB01#
±0.25pF GQM22M5C2H3R0CB01#
3.3pF
±0.1pF GQM22M5C2H3R3BB01#
±0.25pF GQM22M5C2H3R3CB01#
3.6pF
LLM
±0.25pF GQM2195G2E8R0CB12#
Cap.
±0.1pF GQM22M5C2H3R6BB01#
LLR
8.0pF
Rated
TC
Voltage Code
±0.25pF GQM22M5C2H3R6CB01#
3.9pF
±0.1pF GQM22M5C2H3R9BB01#
±0.25pF GQM22M5C2H3R9CB01#
4.0pF
±0.1pF GQM22M5C2H4R0BB01#
±0.25pF GQM22M5C2H4R0CB01#
4.3pF
NFM
±0.25pF GQM2195G2E7R5CB12#
T
max.
±0.1pF GQM22M5C2H4R3BB01#
KRM
7.5pF
Part Number
±0.25pF GQM22M5C2H4R3CB01#
4.7pF
±0.1pF GQM22M5C2H4R7BB01#
±0.25pF GQM22M5C2H4R7CB01#
5.0pF
KR3
1.0mm 250Vdc X8G
Tol.
±0.1pF GQM22M5C2H5R0BB01#
±0.25pF GQM22M5C2H5R0CB01#
5.1pF
±0.25pF GQM22M5C2H5R1CB01#
5.6pF
±0.25pF GQM22M5C2H5R6CB01#
6.0pF
±0.25pF GQM22M5C2H6R0CB01#
6.2pF
±0.25pF GQM22M5C2H6R2CB01#
6.8pF
±0.25pF GQM22M5C2H6R8CB01#
GMA
Cap.
±0.5pF GQM22M5C2H5R1DB01#
±0.5pF GQM22M5C2H5R6DB01#
±0.5pF GQM22M5C2H6R0DB01#
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 2.0×1.25mm)
±0.5pF GQM22M5C2H6R2DB01#
Part number # indicates the package specification code.
87
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GQM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
Part Number List
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
6.8pF
±0.5pF GQM22M5C2H6R8DB01#
7.0pF
±0.25pF GQM22M5C2H7R0CB01#
Part Number
T
max.
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
1.35mm 500Vdc C0G
68pF
±5%
GQM22M5C2H680JB01#
75pF
±2%
GQM22M5C2H750GB01#
±5%
GQM22M5C2H750JB01#
±2%
GQM22M5C2H820GB01#
±5%
GQM22M5C2H820JB01#
91pF
±2%
GQM22M5C2H910GB01#
±5%
GQM22M5C2H910JB01#
100pF
±2%
GQM22M5C2H101GB01#
±5%
GQM22M5C2H101JB01#
±0.5pF GQM22M5C2H7R0DB01#
7.5pF
±0.25pF GQM22M5C2H7R5CB01#
82pF
±0.5pF GQM22M5C2H7R5DB01#
8.0pF
±0.25pF GQM22M5C2H8R0CB01#
8.2pF
±0.25pF GQM22M5C2H8R2CB01#
±0.5pF GQM22M5C2H8R0DB01#
±0.5pF GQM22M5C2H8R2DB01#
±0.25pF GQM22M5C2H9R0CB01#
GQM
9.0pF
±0.5pF GQM22M5C2H9R0DB01#
9.1pF
±0.25pF GQM22M5C2H9R1CB01#
±5%
GQM22M5C2H150JB01#
16pF
±2%
GQM22M5C2H160GB01#
±5%
GQM22M5C2H160JB01#
±2%
GQM22M5C2H180GB01#
±5%
GQM22M5C2H180JB01#
±2%
GQM22M5C2H200GB01#
±5%
GQM22M5C2H200JB01#
±2%
GQM22M5C2H220GB01#
±5%
GQM22M5C2H220JB01#
24pF
±2%
GQM22M5C2H240GB01#
±5%
GQM22M5C2H240JB01#
27pF
±2%
GQM22M5C2H270GB01#
±5%
GQM22M5C2H270JB01#
±2%
GQM22M5C2H300GB01#
±5%
GQM22M5C2H300JB01#
33pF
±2%
GQM22M5C2H330GB01#
±5%
GQM22M5C2H330JB01#
36pF
±2%
GQM22M5C2H360GB01#
±5%
GQM22M5C2H360JB01#
±2%
GQM22M5C2H390GB01#
±5%
GQM22M5C2H390JB01#
±2%
GQM22M5C2H430GB01#
±5%
GQM22M5C2H430JB01#
±2%
GQM22M5C2H470GB01#
±5%
GQM22M5C2H470JB01#
51pF
±2%
GQM22M5C2H510GB01#
±5%
GQM22M5C2H510JB01#
56pF
±2%
GQM22M5C2H560GB01#
±5%
GQM22M5C2H560JB01#
±2%
GQM22M5C2H620GB01#
±5%
GQM22M5C2H620JB01#
±2%
GQM22M5C2H680GB01#
18pF
20pF
22pF
30pF
39pF
43pF
47pF
62pF
68pF
GA3
GB
GQM22M5C2H150GB01#
GA3
GD
±2%
GA3
GF
GQM22M5C2H130JB01#
15pF
LLL
GQM22M5C2H130GB01#
±5%
LLA
GQM22M5C2H120JB01#
±2%
13pF
LLM
GQM22M5C2H120GB01#
±5%
LLR
±2%
12pF
NFM
GQM22M5C2H110JB01#
KRM
GQM22M5C2H110GB01#
±5%
KR3
GQM22M5C2H100JB01#
±2%
11pF
GMA
GQM22M5C2H100GB01#
±5%
GMD
±2%
GA2
±0.5pF GQM22M5C2H9R1DB01#
10pF
GRJ
1.35mm 500Vdc C0G
Tol.
GR4
Cap.
GJM
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GR3
(→ 2.8×2.8mm)
Part number # indicates the package specification code.
88
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
Based on the Electrical Appliance and Material Safety Law of Japan Chip Multilayer Ceramic Capacitors for General Purpose
GR3
WEB
Features
1
Sn plating is applied to the external electrodes, providing excellent solderability.
GJM
GR4
This product is for commercial power supplies, compliant with the Electrical
Appliance and Material Safety Law of Japan.
GRJ
GA2 Series
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Internal Electrodes
GQM
Ceramic
Ni/Sn Plated Layer
GA2
Foundation Electrode Layer
Realized large capacitance value and small size while maintaining high withstand voltages by the
multilayer structure.
3
This product is only for reflow soldering.
4
There are types for connections between lines and connections between lines and ground.
LLM
e
250Vac(r.m.s.)
470pF to 0.10µF
NFM
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
W
KRM
General purpose for Japan
L
LLR
T
KR3
Main Applications
g
GMA
Capacitance
e
GMD
Rated Voltage
4.5×2.0mm to 5.7×5.0mm
!Caution
/Notice
Size (mm)
LLA
Specifications
LLL
GA3
GF
GA3
GD
2
GA3
GB
89
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number List
GR3
GA2 Series High Dielectric Constant Type
C02E.pdf
Mar.13,2020
4.5×2.0mm
Rated
TC
Voltage Code
Tol.
Part Number
470pF
±20% GA242QR7E2471MW01#
1000pF
±20% GA242QR7E2102MW01#
GR4
1.5mm 250Vac(r.m.s.) X7R
Cap.
GRJ
T
max.
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
1.5mm 250Vac(r.m.s.) X7R 2200pF
±20% GA243QR7E2222MW01#
3300pF
±20% GA243QR7E2332MW01#
GQM
T
max.
GJM
4.5×3.2mm
10000pF ±20% GA243QR7E2103MW01#
GA2
22000pF ±20% GA243QR7E2223MW01#
2.0mm 250Vac(r.m.s.) X7R 4700pF
±20% GA243DR7E2472MW01#
GA3
GB
47000pF ±20% GA243DR7E2473MW01#
Part Number
KRM
NFM
LLR
LLM
LLA
LLL
GA3
GF
±20% GA255DR7E2104MW01#
KR3
0.10µF
Tol.
GMA
2.0mm 250Vac(r.m.s.) X7R
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GA3
GD
5.7×5.0mm
Part number # indicates the package specification code.
90
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Standard Certified Chip Multilayer Ceramic Capacitors for General Purpose / IEC60384-14 Class X2
GA3 Series Type GB
GR3
WEB
Features
IEC60384-14 X2 Class Certified product.
C10
C8
C9
C3
GA2
oSwitching Power Supply - Class 1 Equipment
GA3
GB
Can be used as a Class X2 capacitor.
C6
C7
Controller
GA3
GF
C5
C4
Recommend
MLCC Type
X Cap
Type: GB
Y Cap
Type: GF
Primary - Secondary Coupling
Type: GF×2
C1
LLL
Application
No.
GA3
GD
C1
C2
C3
LLA
C2
C9
C7
C3
C3
C8
LLR
oSwitching Power Supply - Class 2 Equipment
NFM
C5
LLM
C4
Controller
C4
No.
C1
C2
Application
X Cap
Y Cap
C3
C4
Primary - Secondary Coupling
Recommend
MLCC Type
KR3
C6
GMA
C5
Type: GB
Type: GF×2
GMD
C2
C2
KRM
C1
!Caution
/Notice
2
WEB
GQM
Please down load Safety Standard Certification (Type GB: X2) from here.
GJM
GR4
GRJ
IEC60384-14 X2 Class Certified Product
1
C02E.pdf
Mar.13,2020
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
91
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Realized large capacitance value and small size while maintaining high withstand voltages by the
multilayer structure.
GR3
3
C02E.pdf
Mar.13,2020
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Internal Electrodes
GRJ
Ceramic
Ni/Sn Plated Layer
Compared with conventional lead type capacitors, this product realized great reductions in size and
height, with a volume of 1/10 or less, and height of 1/4 or less.
5
This product is only for reflow soldering.
g
e
250Vac(r.m.s.)
LLL
LLA
GA3
GF
W
LLM
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
L
LLR
AC-DC power supply
NFM
Main Applications
KRM
10000pF to 56000pF
KR3
Capacitance
T
GMA
e
GMD
Rated Voltage
5.7×5.0mm
!Caution
/Notice
Size (mm)
GA3
GD
Specifications
GA3
GB
GA2
GQM
4
GJM
GR4
Foundation Electrode Layer
92
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number List
GR3
GA3 Series Type GB High Dielectric Constant Type
C02E.pdf
Mar.13,2020
5.7×5.0mm
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
GRJ
T
max.
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
1.5mm 250Vac(r.m.s.) X7R 10000pF ±10% GA355QR7GB103KW01#
GR4
15000pF ±10% GA355QR7GB153KW01#
2.0mm 250Vac(r.m.s.) X7R 22000pF ±10% GA355DR7GB223KW01#
2.5mm 250Vac(r.m.s.) X7R 33000pF ±10% GA355ER7GB333KW01#
GJM
47000pF ±10% GA355ER7GB473KW01#
!Caution
/Notice
GMD
GMA
KR3
KRM
NFM
LLR
LLM
LLA
LLL
GA3
GF
GA3
GD
GA3
GB
GA2
GQM
2.9mm 250Vac(r.m.s.) X7R 56000pF ±10% GA355XR7GB563KW06#
Part number # indicates the package specification code.
93
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Standard Certified Chip Multilayer Ceramic Capacitors for General Purpose / Acquired Certifications of UL60950-1
GA3 Series Type GD
GR3
WEB
GR4
GRJ
UL60950-1 Certified Product
Features
UL60950-1 certified product.
GJM
1
Please down load Safety Standard Certification (Type GD) from here.
WEB
GQM
2
GRM
Mar.13,2020
Can be uesd for UL60950-1 devices.
C5
C1
C5
Tel
Line
C7
C2
Application
C5
Lighting Surge Absorption
C6
Noise Immunity
C7
D/A Isolation Barrier
Recommend
MLCC Type
Type: GD / GF
GA3
GF
Bus
No.
GA3
GD
GA3
GB
C1
GA2
oDAA Modem - Transformer Less
C4
LLL
C3
C6
3
Realized large capacitance value and small size while maintaining high withstand voltages by the
multilayer structure.
LLM
LLA
GND
Internal Electrodes
LLR
Ceramic
Ni/Sn Plated Layer
NFM
Foundation Electrode Layer
This product is only for reflow soldering.
Capacitance
Main Applications
e
g
e
250Vac(r.m.s.)
T
10pF to 4700pF
Modem
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
L
W
GMA
Rated Voltage
4.5×2.0mm to 4.5×3.2mm
GMD
Size (mm)
KR3
Specifications
!Caution
/Notice
4
KRM
94
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number List
GR3
GA3 Series Type GD Temperature Compensating Type
C02E.pdf
Mar.13,2020
GA342A1XGD330JW31#
39pF
±5%
GA342A1XGD390JW31#
47pF
±5%
GA342A1XGD470JW31#
56pF
±5%
GA342A1XGD560JW31#
68pF
±5%
GA342A1XGD680JW31#
82pF
±5%
GA342A1XGD820JW31#
GR4
±5%
GJM
GA342A1XGD270JW31#
33pF
GQM
GA342A1XGD220JW31#
±5%
GA2
±5%
27pF
GA3
GB
22pF
GA3
GD
GA342A1XGD180JW31#
GA3
GF
±5%
LLL
GA342A1XGD150JW31#
18pF
LLA
±5%
LLM
GA342A1XGD120JW31#
15pF
LLR
GA342A1XGD100JW31#
±5%
NFM
±5%
12pF
KRM
10pF
KR3
Part Number
GMA
SL
Tol.
GMD
1.0mm 250Vac(r.m.s.)
Cap.
!Caution
/Notice
Rated
TC
Voltage Code
GRJ
4.5×2.0mm
T
max.
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Part number # indicates the package specification code.
95
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number List
GR3
GA3 Series Type GD High Dielectric Constant Type
C02E.pdf
Mar.13,2020
4.5×2.0mm
Part Number
100pF
±10% GA342QR7GD101KW01#
150pF
±10% GA342QR7GD151KW01#
220pF
±10% GA342QR7GD221KW01#
330pF
±10% GA342QR7GD331KW01#
470pF
±10% GA342QR7GD471KW01#
680pF
±10% GA342QR7GD681KW01#
1000pF
±10% GA342QR7GD102KW01#
1500pF
±10% GA342QR7GD152KW01#
GRJ
Tol.
GR4
1.5mm 250Vac(r.m.s.) X7R
Cap.
GJM
Rated
TC
Voltage Code
GQM
T
max.
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GA3
GD
GA3
GF
LLL
LLA
±10% GA343DR7GD472KW01#
LLM
±10% GA343QR7GD222KW01#
LLR
2200pF
2.0mm 250Vac(r.m.s.) X7R 4700pF
NFM
±10% GA343QR7GD182KW01#
KRM
1.5mm 250Vac(r.m.s.) X7R 1800pF
GA3
GB
Part Number
KR3
Tol.
GMA
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GA2
4.5×3.2mm
Part number # indicates the package specification code.
96
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
Safety Standard Certified Chip Multilayer Ceramic Capacitors for General Purpose / Acquired Certifications of IEC60384-14 Class X1/Y2 and UL60950-1
GR3
WEB
GR4
Size 4.5x2.0mm: This product is applicable only for the instruments certified by
EN/IEC60950-1
Size 5.7x2.8mm or 5.7x5.0mm: This product is applicable as X or Y capacitor
GRJ
GA3 Series Type GF
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Please down load Safety Standard Certification (Type GF: X1/Y2) from here.
GA2
Can be used as a Class Y2 capacitor.
oSwitching Power Supply - Class 1 Equipment
GA3
GB
C10
C8
C9
GA3
GD
C3
C1
C7
Controller
GA3
GF
C6
C2
C5
Application
No.
Recommend
MLCC Type
X Cap
Type: GB
Y Cap
Type: GF
Primary - Secondary Coupling
Type: GF×2
LLA
C1
LLL
C4
C2
C3
LLR
C5
LLM
C4
oSwitching Power Supply - Class 2 Equipment
NFM
C9
C7
C8
C1
C2
C2
C5
C6
Controller
KR3
KRM
C3
C3
No.
C1
C2
Application
X Cap
Y Cap
C3
C4
Primary - Secondary Coupling
Recommend
MLCC Type
Type: GB
Type: GF×2
GMA
C4
GMD
2
WEB
GQM
IEC60384-14 Class X1/X2 certified product.
!Caution
/Notice
1
GJM
Features
97
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Realized large capacitance value and small size while maintaining high withstand voltages by the
multilayer structure.
GR3
3
C02E.pdf
Mar.13,2020
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Internal Electrodes
GRJ
Ceramic
Ni/Sn Plated Layer
GR4
Foundation Electrode Layer
GA2
GA3
GB
W
GA3
GD
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
L
GA3
GF
AC-DC power supply
LLL
10pF to 4700pF
LLA
T
LLM
250Vac(r.m.s.)
LLR
e
NFM
Main Applications
g
KRM
Capacitance
e
KR3
Rated Voltage
4.5×2.0mm to 5.7×5.0mm
GMA
Size (mm)
GMD
Specifications
GQM
GJM
This product is only for reflow soldering.
!Caution
/Notice
4
98
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number List
GR3
GA3 Series Type GF Temperature Compensating Type
C02E.pdf
Mar.13,2020
GA342A1XGF330JW31#
39pF
±5%
GA342A1XGF390JW31#
47pF
±5%
GA342A1XGF470JW31#
56pF
±5%
GA342A1XGF560JW31#
68pF
±5%
GA342A1XGF680JW31#
82pF
±5%
GA342A1XGF820JW31#
GR4
±5%
GJM
GA342A1XGF270JW31#
33pF
GQM
GA342A1XGF220JW31#
±5%
GA2
±5%
27pF
GA3
GB
22pF
GA3
GD
GA342A1XGF180JW31#
GA3
GF
±5%
LLL
GA342A1XGF150JW31#
18pF
LLA
±5%
LLM
GA342A1XGF120JW31#
15pF
LLR
GA342A1XGF100JW31#
±5%
NFM
±5%
12pF
KRM
10pF
KR3
Part Number
GMA
SL
Tol.
GMD
1.0mm 250Vac(r.m.s.)
Cap.
!Caution
/Notice
Rated
TC
Voltage Code
GRJ
4.5×2.0mm
T
max.
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Part number # indicates the package specification code.
99
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number List
GR3
GA3 Series Type GF High Dielectric Constant Type
C02E.pdf
Mar.13,2020
4.5×2.0mm
2.2mm 250Vac(r.m.s.) X7R
Part Number
100pF
±10% GA342QR7GF101KW01#
150pF
±10% GA342QR7GF151KW01#
470pF
±10% GA342QR7GF471KW01#
680pF
±10% GA342QR7GF681KW01#
220pF
±10% GA342DR7GF221KW02#
330pF
±10% GA342DR7GF331KW02#
1000pF
±10% GA342DR7GF102KW02#
GRJ
Tol.
GR4
1.5mm 250Vac(r.m.s.) X7R
Cap.
GJM
Rated
TC
Voltage Code
GQM
T
max.
Part Number
100pF
±10% GA352QR7GF101KW31#
150pF
±10% GA352QR7GF151KW31#
220pF
±10% GA352QR7GF221KW31#
330pF
±10% GA352QR7GF331KW31#
470pF
±10% GA352QR7GF471KW01#
680pF
±10% GA352QR7GF681KW01#
1000pF
±10% GA352QR7GF102KW01#
1500pF
±10% GA352QR7GF152KW01#
GA3
GB
Tol.
GA3
GD
1.5mm 250Vac(r.m.s.) X7R
Cap.
GA3
GF
Rated
TC
Voltage Code
GA2
5.7×2.8mm
T
max.
LLM
±10% GA355DR7GF472KW01#
LLR
±10% GA355QR7GF332KW01#
2.0mm 250Vac(r.m.s.) X7R 4700pF
NFM
±10% GA355QR7GF222KW01#
3300pF
KRM
±10% GA355QR7GF182KW01#
2200pF
KR3
1.5mm 250Vac(r.m.s.) X7R 1800pF
LLA
Part Number
GMA
Tol.
GMD
Cap.
!Caution
/Notice
Rated
TC
Voltage Code
LLL
5.7×5.0mm
T
max.
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Part number # indicates the package specification code.
100
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
C02E.pdf
Mar.13,2020
GRM
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LW Reversed Low ESL Chip Multilayer Ceramic Capacitors for General Purpose
GR3
WEB
1
Low ESL
Since the equivalent series inductance (ESL) is low and excellent in high frequency characteristics,
this capacitor is suitable for power supply decoupling of high-speed operation electronic equipment.
Realizes low ESL by using a thicker
and shorter high frequency current path
Ceramic
Internal Electrodes
Internal Electrodes
GA2
Ceramic
Direction of High
Frequency Current
GA3
GD
GA3
GB
Direction of High
Frequency Current
GQM
Features
GJM
GR4
This low ESL capacitor is ideal for power supply decoupling of high-speed
operation electronic equipment.
GRJ
LLL Series
GA3
GF
LW Reversed Type
(LLL Series)
LLL
Contributes to a reduction in the number of components.
The number of components can be reduced by using low ESL capacitors, while maintaining functions equivalent to
general purpose capacitors (GRM Series).
Murata proposes the use of the LLL series
to reduce the number of components
and high costs. Simulation is also possible.
WEB
Proposal for Cost Reductions
LLA
2
After Design Change
Before Design Change
Reduced
6
LLM
Common
2 Terminal Capacitor
Tow-terminal capacitor
×10pcs
GMA
We also offer an abundant lineup of X7* characteristics that can be used in high temperature locations,
such as IC packages.
Rated Voltage
2.5Vdc to 50Vdc
Capacitance
2200pF to 10µF
Main Applications
g
0.5×1.0mm to 1.6×3.2mm
Application processor/CPU/GPU
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
GMD
Specifications
Size (mm)
KR3
A maximum operating temperature up to 125ºC
e
T
W
L
!Caution
/Notice
3
LW reversed capacitor
×4pcs
KRM
NFM
LLR
capacitors
101
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
±20% LLL153C70G474ME17#
X6S
1.0µF
±20% LLL153C80G105ME21#
0.45mm
0.8mm
Rated
TC
Voltage Code
4Vdc
X5R
Cap.
4.3µF
Tol.
0.5mm
Rated
TC
Voltage Code
Cap.
±20% LLL1U4R60G435ME22#
Tol.
X7R 10000pF ±20% LLL315R71H103MA11#
25Vdc
X7R 47000pF ±20% LLL315R71E473MA11#
Part Number
25Vdc
X7R 10000pF ±20% LLL185R71E103MA11#
16Vdc
X7R 22000pF ±20% LLL185R71C223MA11#
0.10µF
±20% LLL315R71E104MA11#
16Vdc
X7R
0.22µF
±20% LLL315R71C224MA11#
10Vdc
X7R
0.47µF
±20% LLL315R71A474MA11#
50Vdc
X7R 10000pF ±20% LLL317R71H103MA01#
22000pF ±20% LLL317R71H223MA01#
Part Number
0.8×1.6mm
T
max.
50Vdc
22000pF ±20% LLL315R71H223MA11#
0.6×1.0mm
T
max.
Part Number
47000pF ±20% LLL317R71H473MA01#
D1
25Vdc
X7R
0.10µF
±20% LLL317R71E104MA01#
16Vdc
X7R
0.22µF
±20% LLL317R71C224MA01#
0.47µF
±20% LLL317R71C474MA01#
±20% LLL317R71A105MA01#
10Vdc
X7R
1.0µF
6.3Vdc
X7R
2.2µF
±20% LLL317R70J225MA01#
1.25mm 50Vdc
X7R
0.10µF
±20% LLL31MR71H104MA01#
25Vdc
X7R
0.22µF
±20% LLL31MR71E224MA01#
0.47µF
±20% LLL31MR71E474MA01#
47000pF ±20% LLL185R71C473MA11#
16Vdc
X7R
1.0µF
±20% LLL31MR71C105MA01#
10Vdc
X7R
0.10µF
±20% LLL185R71A104MA11#
10Vdc
X7R
2.2µF
±20% LLL31MR71A225MA01#
4Vdc
X7S
0.22µF
±20% LLL185C70G224MA11#
6.3Vdc
X7R
4.7µF
±20% LLL31MR70J475MA01#
X7S
2.2µF
X5R
10µF
±20% LLL31MR60J106ME01#
±20% LLL185C70G225ME01#
0.55mm
4Vdc
0.6mm
50Vdc
X7R 2200pF
±20% LLL185R71H222MA01#
4700pF
±20% LLL185R71H472MA01#
25Vdc
X7R 10000pF ±20% LLL185R71E103MA01#
GR4
0.47µF
Tol.
GJM
X7S
0.5mm
Cap.
GQM
±20% LLL153C80J104ME01#
±20% LLL153C80J224ME14#
Rated
TC
Voltage Code
GA2
0.10µF
0.22µF
X6S
T
max.
Part Number
GA3
GB
Tol.
GA3
GD
4Vdc
Cap.
GA3
GF
Rated
TC
Voltage Code
0.35mm 6.3Vdc
GRM
1.6×3.2mm
LLL
T
max.
GR3
0.5×1.0mm
Part Number List
GRJ
LLL Series High Dielectric Constant Type
C02E.pdf
Mar.13,2020
X7R 47000pF ±20% LLL185R71C473MA01#
10Vdc
X7R
4Vdc
X7S
0.10µF
±20% LLL185R71A104MA01#
0.22µF
±20% LLL185R71A224MA01#
0.47µF
±20% LLL185C70G474MA01#
LLM
16Vdc
LLA
22000pF ±20% LLL185R71E223MA01#
Part Number
50Vdc
X7R 10000pF ±20% LLL215R71H103MA11#
25Vdc
X7R 22000pF ±20% LLL215R71E223MA11#
16Vdc
X7R 47000pF ±20% LLL215R71C473MA11#
0.10µF
±20% LLL215R71C104MA11#
10Vdc
X7R
0.22µF
±20% LLL215R71A224MA11#
6.3Vdc
X7R
0.47µF
±20% LLL215R70J474MA11#
4Vdc
X7S
1.0µF
±20% LLL215C70G105MA11#
50Vdc
X7R 10000pF ±20% LLL216R71H103MA01#
25Vdc
X7R 47000pF ±20% LLL216R71E473MA01#
0.10µF
±20% LLL216R71E104MA01#
10Vdc
X7R
0.22µF
±20% LLL216R71A224MA01#
0.95mm 16Vdc
X7R
0.22µF
±20% LLL219R71C224MA01#
10Vdc
X7R
0.47µF
±20% LLL219R71A474MA01#
1.0µF
±20% LLL219R71A105MA01#
2.2µF
±20% LLL219C70G225MA01#
0.7mm
NFM
Tol.
KRM
Cap.
KR3
0.5mm
Rated
TC
Voltage Code
GMA
T
max.
LLR
1.25×2.0mm
X7S
!Caution
/Notice
4Vdc
GMD
22000pF ±20% LLL216R71H223MA01#
Part number # indicates the package specification code.
102
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
C02E.pdf
Mar.13,2020
GRM
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
8 Terminals Low ESL Chip Multilayer Ceramic Capacitors for General Purpose
GR3
WEB
1
Ultra-low ESL
Since the equivalent series inductance (ESL) is very low with excellent high frequency characteristics due to the
design structure, this capacitor is ideal for power supply decoupling of high-speed operation IC.
Internal Electrodes
GQM
Features
GJM
GR4
8-Terminal Type Low ESL Capacitor Ideal for Power Supply Decoupling
of High-speed Operation IC
GRJ
LLA Series
+
–
+
–
+
Mounting Surfac
–
e
Ground Plane
pl
Power Supp
y Pl an
e
The inductance of via
becomes lower by the
mutual inductance
between the adjacent via.
The inductance for the boards also becomes lower, not only the capacitor.
A maximum operating temperature up to 125ºC
LLR
2
LLA
+
LLL
Current Direction
LLM
The current flows into the
adjacent electrode, which
reduces the current loop
and lowers the ESL.
–
This product is applicable to high temperatures (X7* characteristics); however, Murata also offers numerous
thin type products, which are ideal as decoupling capacitors on IC package.
NFM
Since the current is the
reverse direction, the ESL
becomes lower with
mutual inductance.
The inductance of the pattern
becomes lower by the mutual
inductance between the
adjacent wiring.
GA3
GF
GA3
GD
GA3
GB
GA2
Ceramic
Main Applications
3
4
T
4Vdc to 25Vdc
10000pF to 4.7µF
Application processor/CPU/GPU
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
1 3 5 7
8
7
L
6
5
KR3
2
W
2 4 6 8
GMA
Capacitance
1
GMD
Rated Voltage
P
1.6×0.8mm to 2.0×1.25mm
!Caution
/Notice
Size (mm)
KRM
Specifications
103
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number List
GR3
LLA Series High Dielectric Constant Type
C02E.pdf
Mar.13,2020
1.6×0.8mm
X7S
Tol.
Part Number
0.10µF
±20% LLA185C70G104MA01#
0.22µF
±20% LLA185C70G224MA01#
0.47µF
±20% LLA185C70G474MA01#
2.2µF
±20% LLA185C70G225ME16#
GRJ
4Vdc
Cap.
GR4
0.55mm
Rated
TC
Voltage Code
GJM
T
max.
2.0×1.25mm
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
0.55mm 25Vdc
X7R 10000pF ±20% LLA215R71E103MA14#
16Vdc
X7R 47000pF ±20% LLA215R71C473MA14#
0.10µF
±20% LLA215R71C104MA14#
10Vdc
X7R
0.22µF
±20% LLA215R71A224MA14#
6.3Vdc
X7R
0.47µF
±20% LLA215R70J474MA14#
4Vdc
X7S
1.0µF
±20% LLA215C70G105MA14#
4.7µF
±20% LLA215C70G475ME19#
GQM
T
max.
GA3
GD
GA3
GB
GA2
22000pF ±20% LLA215R71E223MA14#
0.95mm 25Vdc
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
X7R 10000pF ±20% LLA219R71E103MA01#
GA3
GF
22000pF ±20% LLA219R71E223MA01#
X7S
2.2µF
±20% LLA219C70G225MA01#
LLA
±20% LLA219R70J105MA01#
4Vdc
LLM
±20% LLA219R71A474MA01#
1.0µF
LLR
0.47µF
X7R
NFM
X7R
KRM
10Vdc
6.3Vdc
KR3
±20% LLA219R71C104MA01#
±20% LLA219R71C224MA01#
GMA
0.10µF
0.22µF
GMD
X7R
!Caution
/Notice
16Vdc
LLL
47000pF ±20% LLA219R71E473MA01#
Part number # indicates the package specification code.
104
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Mar.13,2020
GRM
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
10 Terminals Low ESL Chip Multilayer Ceramic Capacitors for General Purpose
GR3
WEB
1
This is the lowest ESL LW reversed type capacitor.
Since the equivalent series inductance (ESL) of this product is even lower than the LLA series (8-terminal product)
with excellent high frequency characteristics, this capacitor is ideal for power supply decoupling of high-speed
operation IC.
GQM
Features
GJM
GR4
10-Terminal Type Low ESL Capacitor Ideal for Power Supply Decoupling of
High-speed Operation IC
GRJ
LLM Series
Internal Electrodes
+
–
The current flows into the
adjacent electrode, which
reduces the current loop
and lowers the ESL.
Current Direction
+
–
+
–
+
Mounting Surface
–
Ground Plane
Power Supply P
l an
e
The inductance of via
becomes lower by the
mutual inductance
between the adjacent via.
LLL
–
LLA
+
Since the current is the
reverse direction, the ESL
becomes lower with
mutual inductance.
The inductance of the pattern
becomes lower by the mutual
inductance between the
adjacent wiring.
LLM
GA3
GF
GA3
GD
GA3
GB
GA2
Ceramic
This product is applicable to high temperatures (X7* characteristics); however, Murata also offers numerous
thin type products, which are ideal as decoupling capacitors on IC package.
Capacitance
Main Applications
2
3
4
T
4Vdc to 25Vdc
10000pF to 1.0µF
Application processor/CPU/GPU
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
9
KR3
1
10
8
L
7
6
5
W
1 3 5 7 9
2 4 6 8 10
GMA
Rated Voltage
P
2.0×1.25mm
GMD
Size (mm)
KRM
Specifications
NFM
A maximum operating temperature up to 125ºC
!Caution
/Notice
2
LLR
The inductance for the boards also becomes lower, not only the capacitor.
105
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number List
GR3
LLM Series High Dielectric Constant Type
C02E.pdf
Mar.13,2020
2.0×1.25mm
Cap.
Tol.
Part Number
0.55mm 25Vdc
X7R 10000pF ±20% LLM215R71E103MA11#
16Vdc
X7R 47000pF ±20% LLM215R71C473MA11#
GRJ
Rated
TC
Voltage Code
GJM
GQM
GA2
GA3
GB
GA3
GD
GA3
GF
LLL
LLA
LLM
±20% LLM215C70G105MA11#
LLR
1.0µF
NFM
±20% LLM215R70J224MA11#
±20% LLM215R70J474MA11#
KRM
X7S
0.22µF
0.47µF
KR3
4Vdc
X7R
GMA
6.3Vdc
±20% LLM215R71C104MA11#
GMD
0.10µF
GR4
22000pF ±20% LLM215R71E223MA11#
!Caution
/Notice
T
max.
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Part number # indicates the package specification code.
106
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LW Reversed Controlled ESR Low ESL Chip Multilayer Ceramic Capacitors for General Purpose
GR3
WEB
1
Reduces Anti-resonance
This capacitor is controlled so that the equivalent series resistance (ESR) becomes slightly higher,
and is effective in reducing the anti-resonance that occurs when capacitor arrays are used.
GA3
GD
Impedance
GA3
GB
GA2
Reduces
Anti-resonance!!
GQM
Features
GJM
GR4
ESR Controlled Type Low ESL Capacitors Equipped with Anti-resonance Control
Function
GRJ
LLR Series
C02E.pdf
Mar.13,2020
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GA3
GF
The anti-resonance can be reduced by
using a controlled ESR capacitor!!
LLL
Frequency
According to the conditions of the anti-resonance, the most suitable ESR value can be selected from 4 types.
3
Low ESL
LLR
This ESR controlled type capacitor has excellent high frequency characteristics, with low equivalent series
inductance (ESL). This is also ideal as a decoupling component.
LLA
Lineup of capacitors with ESR values from 100-1,000mΩ.
LLM
2
4Vdc
Capacitance
1.0µF
Network processor/ASIC/PMIC
e
T
KRM
Rated Voltage
Main Applications
g
0.8×1.6mm
W
L
KR3
Size (mm)
NFM
Specifications
!Caution
/Notice
GMD
GMA
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
107
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number List
GR3
LLR Series High Dielectric Constant Type
C02E.pdf
Mar.13,2020
0.8×1.6mm
GRJ
±20% LLR185C70G105ME01#
GR4
±20% LLR185C70G105ME03#
±20% LLR185C70G105ME05#
NFM
LLR
LLM
LLA
LLL
GA3
GF
GA3
GD
GA3
GB
GA2
GQM
GJM
±20% LLR185C70G105ME07#
KRM
1.0µF
Part Number
KR3
X7S
Tol.
GMA
4Vdc
Cap.
GMD
0.55mm
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Part number # indicates the package specification code.
108
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
3 Terminals Low ESL Chip Multilayer Ceramic Capacitors for General Purpose
GR3
WEB
Low ESL
Since the equivalent series inductance (ESL) is low and excellent in high frequency characteristics, this capacitor is
suitable for power supply decoupling of high-speed operation electronic equipment.
GND
g long current distance
g Narrow wiring width
• 3-terminal capacitor
n Short current distance
Current
HOT
GA3
GB
HOT
Current
GA3
GD
• 2-terminal Capacitor
GA2
Realizes Ultra low ESL by using a extremely
shorter high frequency current path
n Wide wiring width
n Four routes formed in parallel
GA3
GF
1
GQM
Features
GJM
GR4
This is the most suitable Low ESL capacitors for noise measurement and power
decoupling of highspeed electrical devices.
GRJ
NFM Series
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Reduction of
68 components
2-terminal capacitor
3-terminal capacitor
100pcs
32pcs
LLA
LLM
LLR
Application IC
NFM
Application IC
KRM
After
KR3
Before
GMA
The number of components can be reduced by using low ESL capacitors, while maintaining functions equivalent to
2-terminal capacitor.
GMD
Contributes to a reduction in the number of components.
!Caution
/Notice
2
LLL
GND
109
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Contributes to noise suppression as an EMI filter
GR3
Without NFM series
40
30
20
10
Micro computer
GRJ
50
GR4
Noise Level (dBµV/m)
60
0
200
400
600
800
1000
GQM
Frequency (MHz)
GJM
3
C02E.pdf
Mar.13,2020
GRM
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GA2
With NFM series 1µF×1pc
Micro computer
Inner layer
power pattern
GA3
GB
50
40
GA3
GD
30
20
10
0
200
400
600
800
1000
Frequency (MHz)
LLL
GND
Power line
NFM
WEB
LLA
Example of noise suppression effect
LLR
3
g
W
1
3
2
NFM
Application processor, PMIC
2
i
L
KRM
100pF to 27µF
e
T
KR3
2.5Vdc to 100Vdc
2
j
GMA
Main Applications
1
GMD
Capacitance
1.0×0.5mm to 4.5×1.6mm
!Caution
/Notice
Rated Voltage
LLM
Specifications
Size (mm)
GA3
GF
Noise Level (dBµV/m)
60
110
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Rated
Voltage
Cap.
Tol.
0.95mm
6.3Vdc
2.2µF
±20%
NFM21PC225B0J3#
10µF
±20%
NFM21PS106B0J3#
Tol.
Rated
Voltage
Cap.
Tol.
0.35mm
6.3Vdc
0.47µF
±20%
NFM15PC474R0J3#
4Vdc
0.47µF
±20%
NFM15PC474D0G3#
1.0µF
±20%
NFM15PC105R0G3#
2200pF
±20%
NFM15CC222D1C3#
22000pF
±20%
NFM15CC223C1C3#
T
max.
Rated
Voltage
Cap.
47000pF
±20%
NFM15PC473C1C3#
0.9mm
50Vdc
220pF
+50/-20% NFM3DCC221R1H3#
2200pF
±20%
NFM15CC222D1A3#
470pF
+50/-20% NFM3DCC471R1H3#
22000pF
±20%
NFM15CC223C1A3#
1000pF +50/-20% NFM3DCC102R1H3#
47000pF
±20%
NFM15PC473C1A3#
2200pF +50/-20% NFM3DCC222R1H3#
0.10µF
±20%
NFM15PC104R1A3#
22000pF +50/-20% NFM3DCC223R1H3#
0.22µF
±20%
NFM15PC224R1A3#
0.10µF
±20%
NFM15PC104D0J3#
±20%
NFM15PC224D0J3#
4.3µF
±20%
NFM15PC435R0E3#
0.65mm
2.5Vdc
7.5µF
±20%
NFM15PC755R0E3#
0.7mm
2.5Vdc
9.1µF
±20%
NFM15PC915R0E3#
GR4
GJM
GQM
D3
3.2×1.6mm
T
max.
1.5mm
Rated
Voltage
Cap.
Tol.
Part Number
100Vdc 10000pF
±20%
NFM31KC103R2A3#
15000pF
±20%
NFM31KC153R2A3#
22000pF
±20%
NFM31KC223R2A3#
0.10µF
±20%
NFM31KC104R2A3#
1.6×0.8mm
D3
T
max.
Rated
Voltage
Cap.
Tol.
10000pF
±20%
NFM31KC103R1H3#
D3
0.7mm
16Vdc
100pF
±20%
NFM18CC101R1C3#
15000pF
±20%
NFM31KC153R1H3#
D3
220pF
±20%
NFM18CC221R1C3#
22000pF
±20%
NFM31KC223R1H3#
D3
470pF
±20%
NFM18CC471R1C3#
0.10µF
±20%
NFM31KC104R1H3#
1000pF
±20%
NFM18CC102R1C3#
27µF
±20%
NFM31PC276B0J3#
Cap.
Tol.
6.3Vdc
50Vdc
LLA
6.3Vdc
2200pF
±20%
NFM18CC222R1C3#
22000pF
±20%
NFM18CC223R1C3#
0.10µF
±20%
NFM18PC104R1C3#
0.22µF
±20%
NFM18PC224R0J3#
0.47µF
±20%
NFM18PC474R0J3#
T
max.
Rated
Voltage
±20%
NFM18PS474R0J3#
1.2mm
100Vdc
±20%
NFM18PS105D0J3#
±20%
NFM18PS105R0J3#
2200pF +50/-20% NFM41CC222R2A3#
±20%
NFM18PC225B0J3#
22000pF +50/-20% NFM41CC223R2A3#
1.0µF
2.2µF
4.5×1.6mm
470pF
Part Number
+50/-20% NFM41CC471R2A3#
1000pF +50/-20% NFM41CC102R2A3#
10Vdc
2.2µF
±20%
NFM18PC225B1A3#
50Vdc
1.5µF
±20%
NFM41PC155B1H3#
6.3Vdc
1.0µF
±20%
NFM18PC105R0J3#
25Vdc
1.5µF
±20%
NFM41PC155B1E3#
KRM
0.9mm
Part Number
T
max.
Rated
Voltage
Cap.
Tol.
0.95mm
50Vdc
220pF
±20%
NFM21CC221R1H3#
470pF
±20%
NFM21CC471R1H3#
1000pF
±20%
NFM21CC102R1H3#
2200pF
±20%
NFM21CC222R1H3#
22000pF
±20%
NFM21CC223R1H3#
25Vdc
0.10µF
±20%
NFM21PC104R1E3#
16Vdc
0.22µF
±20%
NFM21PC224R1C3#
0.47µF
±20%
NFM21PC474R1C3#
1.0µF
±20%
NFM21PC105B1C3#
1.0µF
±20%
NFM21PC105B1A3#
4.7µF
±20%
NFM21PC475B1A3#
KR3
2.0×1.25mm
10Vdc
GA2
NFM3DPC223R1H3#
GA3
GB
0.22µF
2.5Vdc
±20%
GA3
GD
6.3Vdc
GA3
GF
10Vdc
Part Number
LLL
16Vdc
3.2×1.25mm
LLM
0.5mm
GRJ
Part Number
T
max.
Part Number
GR3
T
max.
LLR
1.0×0.5mm
GRM
Part Number List
NFM
NFM Series
C02E.pdf
Mar.13,2020
!Caution
/Notice
GMD
GMA
Part Number
Part number # indicates the package specification code.
111
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Metal Terminal Type Multilayer Ceramic Capacitors for General Purpose
GR3
WEB
GR4
Bonding the metal terminals to external electrodes solves design issues
by mounting large size MLCC!
Features
GJM
Bond metal terminals to the external electrodes of chips.
The stress applied to the chip is relieved by the elastic action of the metal terminal.
Ceramic
Noise
Board Deflection Cracks
Internal Electrodes
Lead-free High Temperature Solder
Solder Cracks
GQM
1
GRJ
KRM Series
C02E.pdf
Mar.13,2020
GRM
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GA2
Metal Terminal
GA3
GB
Cracks from mechanical stress to boards and noise
from vibration of the capacitors are design issues.
Substantially reduces noise, board deflection cracks and soldering cracks.
80
60
40
20
0
80
60
40
Metal Terminal Type
(5750 (in mm)/2220 (in inch)
/630V/220nF)
No damage,
even with 6 mm
board deflection!!
Chip Capacitor
(5750 (in mm)/2220 (in inch)
/630V/220nF)
20
0
10,000
Frequency (Hz)
0
0.0
20,000
LLA
Residual Ratio (%)
100
LLM
Metal Terminal Type KRM21ER61E106KHA1
Chip Capacitor GRM21BR61E106KA73
100
LLL
oReduces Stress Caused by Board Deflection
1.0
2.0
3.0
4.0
5.0
Amount of Board Deflection (mm)
6.0
LLR
oAcoustic Noise is Reduced with Metal Terminals
GA3
GF
This product is not damaged even with a board deflection of 6 mm.
Solder cracks do not occur even with 2,000 cycles of heat stress.
Sound Pressure Level (dB)
oSuppresses Solder Cracks Caused by Heat Stress
NFM
Metal Terminal Type
(5750 (in mm)/2220 (in inch) size)
KRM
Chip Only
(5750 (in mm)/2220 (in inch) size)
1000 Cycle
KR3
Solder Crack
2000 Cycle
GMD
Solder Crack
Compared with chips only,
this product is excellent
in solder cracking resistance.
Test Condition: -55 to +125°C, 5min.,(Liquid Phase)
Board Used: Glass Epoxy Board (FR-4)
Demonstrates replacement value of low noise capacitors Experience the effectiveness of the KRM Series.
Examples of Noise Countermeasures
GMA
Chip Size
WEB
!Caution
/Notice
2
GA3
GD
Reduces stress by the elastic action of the metal terminals!
112
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
3
C02E.pdf
Mar.13,2020
GRM
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
2 chips can be stacked.
GR3
Realize large capacity by stacking 2 capacitors.
GRJ
Specifications
GJM
GQM
GA2
GA3
GB
GA3
GD
GA3
GF
LLL
LLA
LLM
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
W
LLR
For smoothing and noise suppression of DC-DC converters
L
NFM
Main Applications
e
KRM
0.015µF to 100µF
KR3
Capacitance
T
GMA
16Vdc to 1000Vdc
GMD
Rated Voltage
GR4
2.2×1.25mm to 6.1×5.3mm
!Caution
/Notice
Size (mm)
113
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number List
GR3
KRM Series Temperature Compensating Type
C02E.pdf
Mar.13,2020
6.1×5.1mm
KRM55V5C2J443JDL2#
0.054µF
±5%
KRM55V5C2J543JDL2#
GR4
±5%
GJM
KRM55T5C2J363JDL1#
6.6mm 630Vdc C0G 0.044µF
GQM
KRM55T5C2J303JDL1#
±5%
GA2
±5%
0.036µF
GA3
GB
5.1mm 630Vdc C0G 0.030µF
GA3
GD
KRM55R5C2J273JDL1#
GA3
GF
±5%
LLL
KRM55R5C2J223JDL1#
0.027µF
LLA
±5%
LLM
KRM55L5C2J183JDL1#
3.9mm 630Vdc C0G 0.022µF
LLR
KRM55L5C2J153JDL1#
±5%
NFM
±5%
0.018µF
KRM
3.1mm 630Vdc C0G 0.015µF
GRJ
Part Number
KR3
Tol.
GMA
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Part number # indicates the package specification code.
114
±10% KRM55QR7YA226KH01#
X7R
22µF
±10% KRM55QR71E226KH01#
33µF
±10% KRM55QR71E336KH01#
±10% KRM21ER61E106KFA1#
16Vdc
X5R
10µF
±10% KRM21ER61C106KFA1#
25Vdc
X7S
10µF
±10% KRM21FC71E106KFA1#
D1
X7S
X6S
10µF
±10% KRM21FC81E106KFA1#
D1
5.0mm 1000Vdc X7R
X5R
22µF
±20% KRM21FR61E226MFA1#
630Vdc X7R
3.5×1.7mm
T
max.
450Vdc X7R
Rated
TC
Voltage Code
Cap.
25Vdc
X5R
10µF
±10% KRM31FR61E106KH01#
2.9mm 100Vdc X7R
1.0µF
±10% KRM31KR72A105KH01#
2.0mm
Tol.
Part Number
2.9mm
±20% KRM55TR73A154MH01#
0.22µF
±20% KRM55TR73A224MH01#
0.33µF
±20% KRM55TR72J334MH01#
0.47µF
±20% KRM55TR72J474MH01#
0.68µF
±20% KRM55TR72W684MH01#
1.0µF
±20% KRM55TR72W105MH01#
1.5µF
±20% KRM55TR72E155MH01#
2.2µF
±20% KRM55TR72E225MH01#
10µF
±20% KRM55TR72A106MH01#
X7R
4.7µF
±10% KRM31KR71H475KH01#
50Vdc
X7R
22µF
±20% KRM55TR71H226MH01#
35Vdc
X6S
10µF
±10% KRM31KC8YA106KH01#
35Vdc
X7R
22µF
±20% KRM55TR7YA226MH01#
25Vdc
X6S
10µF
±10% KRM31KC81E106KH01#
33µF
±20% KRM55TR7YA336MH01#
25Vdc
X7R
33µF
±20% KRM55TR71E336MH01#
6.7mm 100Vdc X7R
15µF
±20% KRM55WR72A156MH01#
22µF
±20% KRM55WR72A226MH01#
Rated
TC
Voltage Code
Cap.
50Vdc
2.2µF
X7R
Tol.
Part Number
63Vdc
X7R
22µF
±20% KRM55WR71J226MH01#
50Vdc
X7R
22µF
±20% KRM55WR71H226MH01#
33µF
±20% KRM55WR71H336MH01#
35Vdc
X7R
±10% KRM31KR71H225KH01#
3.7×1.85mm
25Vdc
Rated
TC
Voltage Code
Cap.
2.9mm 100Vdc X7R
2.2µF
Tol.
Part Number
X7R
X7S
33µF
±20% KRM55WR7YA336MH01#
47µF
±20% KRM55WR7YA476MH01#
47µF
±20% KRM55WR71E476MH01#
68µF
±20% KRM55WR71E686MH01#
100µF
±20% KRM55WC71E107MH13#
6.1×5.3mm
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
LLR
T
max.
GRM
±10% KRM31KR72A225KH01#
LLM
T
max.
100Vdc X7R
±10% KRM55QC71E476KH13#
0.15µF
50Vdc
3.6×1.7mm
T
max.
250Vdc X7R
47µF
GR3
22µF
25Vdc
10µF
GRJ
±10% KRM55QR7YA176KH01#
X5R
Part Number
GR4
17µF
25Vdc
Tol.
GJM
X7R
Cap.
Part Number
GQM
35Vdc
Rated
TC
Voltage Code
Tol.
GA2
2.0mm
Cap.
GA3
GB
1.9mm
3.9mm
Rated
TC
Voltage Code
GA3
GD
T
max.
2.2×1.25mm
T
max.
Part Number List
GA3
GF
KRM Series High Dielectric Constant Type
C02E.pdf
Mar.13,2020
LLL
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LLA
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
3.0mm 1000Vdc X7R 68000pF ±10% KRM55LR73A683KH01#
±10% KRM55LR72W334KH01#
±10% KRM55LR72W474KH01#
0.68µF
±10% KRM55LR72E684KH01#
1.0µF
±10% KRM55LR72E105KH01#
4.7µF
±10% KRM55LR72A475KH01#
±10% KRM55LR71J475KH01#
63Vdc
X7R
4.7µF
50Vdc
X7R
4.7µF
±10% KRM55LR71H475KH01#
10µF
±10% KRM55LR71H106KH01#
10µF
±10% KRM55LR7YA106KH01#
15µF
±10% KRM55LR7YA156KH01#
X7R
15µF
±10% KRM55LR71E156KH01#
3.9mm 100Vdc X7R
6.8µF
±10% KRM55QR72A685KH01#
10µF
±10% KRM55QR72A106KH01#
35Vdc
25Vdc
X7R
63Vdc
X7R
10µF
±10% KRM55QR71J106KH01#
50Vdc
X7R
10µF
±10% KRM55QR71H106KH01#
17µF
±10% KRM55QR71H176KH01#
NFM
KRM
0.33µF
0.47µF
KR3
100Vdc X7R
±10% KRM55LR72J224KH01#
GMA
250Vdc X7R
±10% KRM55LR72J154KH01#
0.22µF
GMD
450Vdc X7R
±10% KRM55LR73A104KH01#
0.15µF
!Caution
/Notice
0.10µF
630Vdc X7R
Part number # indicates the package specification code.
115
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
High Effective Capacitance & High Allowable Ripple Current Metal Terminal Type Multilayer Ceramic Capacitors for General Purpose
KR3 Series
GR3
WEB
Bond Metal Terminals to External Electrodes of Chips
This product has high resistance to heat and mechanical impact and greatly reduces acoustic noise of boards by
ceramics.
Ceramic
GA2
Lead-free High Temperature Solder
Solder Cracks
Metal Terminal
GA3
GB
Cracks from mechanical stress to boards and noise
from vibration of the capacitors are design issues.
Stacking of Chips
100
Reduced about 30dB!
40
20
0
80
No damage,
even with 6 mm
board deflection!!
60
40
Chip Capacitor
(5750(in mm)/2220(in inch)
/630V/220nF)
LLM
Residual Ratio (%)
60
Metal Terminal Type
(5750 (in mm)/2220 (in inch)
/630V/220nF)
20
Chip Capacitor
Metal Terminal Type
0
0.0
1.0
2.0
3.0
4.0
5.0
Amount of Board Deflection (mm)
6.0
NFM
Evaluation Items: 5750 (in mm)/2220 (in inch) size/DC630V/220nF
Test Method: DC50V, AC10Vp-p/3kHz
Test Board: Glass Epoxy Board (T=1.6mm)
Test Quantity: 3pc
Distance Between Microphone and Board: 5mm
KRM
Note: Results Using Murata's Evaluation Board
oSuppresses Solder Cracks Caused by Heat Stress
Metal Terminal Type
(5750 (in mm)/2220 (in inch) size)
KR3
Chip Only
(5750 (in mm)/2220 (in inch) size)
GMA
Chip Size
LLL
oReduces Stress Caused by Board Deflection
80
LLA
oComparison of Noise Reduction Effects
GA3
GF
Achieve high capacity by stacking 2 capacitors.
Sound Pressure Level (dB)
1000 Cycle
Solder Crack
GMD
2
GA3
GD
Reduces stress by the elastic action of the metal terminals!
LLR
Board Deflection Cracks
2000 Cycle
Solder Crack
Compared with chips only,
this product is excellent
in solder cracking resistance.
!Caution
/Notice
Noise
Internal Electrodes
GQM
Features
GJM
GR4
GRJ
Bonding the metal terminals to external electrodes solves design issues
by mounting large size MLCC!
1
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Test Condition: -55 to +125°C, 5min., (Liquid Phase)
Board Used: Glass Epoxy Board (FR-4)
116
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Improved effective capacity and ripple resistant performance, compared to conventional products
(X7R characteristics).
20
GR4
-20
-40
-60
100
150
DC Bias (V)
200
250
GQM
50
GA3
GB
GA3
GD
GA3
GF
W
LLL
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
L
LLA
For DC-DC converters of general electronic equipment
e
LLM
Main Applications
0.10µF to 2.2µF
LLR
Capacitance
T
250Vdc to 630Vdc
NFM
Rated Voltage
6.1×5.3mm
KRM
Size (mm)
GA2
Specifications
KR3
0
GMA
-100
GJM
-80
GMD
Cap. Change (%)
GRJ
New Material (250V/1µF/X7T)
Conventional Material (250V/1µF/X7R)
0
GR3
Adopted Low Dielectric Constant Materials
!Caution
/Notice
3
C02E.pdf
Mar.13,2020
GRM
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
117
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number List
GR3
KR3 Series High Dielectric Constant Type
C02E.pdf
Mar.13,2020
6.1×5.3mm
450Vdc X7T
0.56µF
±10% KR355QD72W564KH01#
250Vdc X7T
1.0µF
±10% KR355QD72E105KH01#
0.68µF
±20% KR355TD72W684MH01#
1.0µF
±20% KR355TD72W105MH01#
1.5µF
±20% KR355TD72E155MH01#
0.47µF
±20% KR355WD72J474MH01#
0.56µF
±20% KR355WD72J564MH01#
5.0mm 450Vdc X7T
250Vdc X7T
6.7mm 630Vdc X7T
450Vdc X7T
1.2µF
±20% KR355WD72W125MH01#
250Vdc X7T
2.2µF
±20% KR355WD72E225MH01#
GRJ
GR4
GJM
GQM
±10% KR355QD72J224KH01#
±10% KR355QD72J274KH01#
GA2
0.22µF
0.27µF
3.9mm 630Vdc X7T
GA3
GB
±10% KR355LD72E684KH01#
GA3
GD
±10% KR355LD72E474KH01#
0.68µF
GA3
GF
±10% KR355LD72W474KH01#
0.47µF
LLL
0.47µF
LLA
±10% KR355LD72W224KH01#
±10% KR355LD72W334KH01#
LLM
0.22µF
0.33µF
LLR
±10% KR355LD72J104KH01#
±10% KR355LD72J154KH01#
NFM
0.10µF
0.15µF
KRM
250Vdc X7T
Part Number
KR3
450Vdc X7T
Tol.
GMA
3.0mm 630Vdc X7T
Cap.
GMD
Rated
TC
Voltage Code
!Caution
/Notice
T
max.
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Part number # indicates the package specification code.
118
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
Wire Bonding Mount Multilayer Microchip Capacitors for General Purpose
GR3
WEB
1
Allows for high density mounting.
Noise can be reduced by eliminating the routing of the wire, and high efficiency can be achieved with a built-in
capacitor in a package, such as IC. Miniaturization of the set is also possible.
Bare Chip
GA2
GMA
GQM
Features
GJM
GR4
These capacitors have gold-plated electrodes and are designed specifically
for wire bonding.
GRJ
GMA Series
C02E.pdf
Mar.13,2020
GRM
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GA3
GB
Au (Gold) plated layer
Internal Electrodes: Ni
Ground Line
LLL
Achieved small size and high capacitance with a multilayer structure.
Small size, high capacitance
Minimum 0.38mm×0.38mm
Achieved 0.1µF in 0.5mm×0.5mm size
Lineup comparison table with competitor's is provided in my Murata Capacitor Site (need to sign in & approval from the site)
WEB
Since the capacitor consists of an upper/lower electrode structure, the current path becomes shorter and lowers
the ESL. Compared with the general purpose GRM series of the same capacity, the impedance of this product
becomes lower at high frequencies.
GMA Series
For General Purpose GRM Series
KRM
100
LLR
Excellent in high frequency characteristics.
10
1
KR3
Impedance (Ω)
0.1
0.01
10
GMA
4
NFM
Especially for optical communication related devices such as TOSA/ROSA.
LLM
Ideal for bypass applications
100
Frequency (MHz)
1000
GMD
3
GA3
GF
!Caution
/Notice
2
Vcc Line
LLA
Ni plated layer
Foundation Electrode Layer
GA3
GD
Ceramic
119
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
GRJ
GR4
GJM
GQM
GA2
GA3
GB
GA3
GD
GA3
GF
LLL
LLA
LLM
LLR
NFM
KRM
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
KR3
1. Optical communication related devices such as TOSA/ROSA.
2. Various device related, such as GaAsIC (mounted in IC packages)
3. Measuring instruments, other ultra compact/thin devices
W
GMA
Main Applications
100pF to 0.47µF
L
GMD
Capacitance
6.3Vdc to 100Vdc
!Caution
/Notice
Rated Voltage
T
0.38×0.38mm to 0.8×0.8mm
GR3
Specifications
Size (mm)
C02E.pdf
Mar.13,2020
GRM
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
120
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
±20% GMA085R72A332MA01#
4700pF
±20% GMA085R72A472MA01#
6800pF
±20% GMA085R72A682MA01#
X7R 1000pF
±20% GMA0D3R71A102MA01#
1500pF
±20% GMA0D3R71A152MA01#
1800pF
±20% GMA0D3R71A182MA01#
15000pF ±20% GMA085R71E153MA11#
10000pF ±20% GMA0D3R71A103MA01#
22000pF ±20% GMA085R71E223MA11#
R
1000pF
±20% GMA0D3R11A102MA01#
1500pF
±20% GMA0D3R11A152MA01#
1800pF
±20% GMA0D3R11A182MA01#
10000pF ±20% GMA0D3R11A103MA01#
B
25Vdc
B
22000pF ±20% GMA085B31E223MA11#
X7R 33000pF ±20% GMA085R71A333MA01#
1000pF
±20% GMA0D3B11A102MA01#
47000pF ±20% GMA085R71A473MA01#
1500pF
±20% GMA0D3B11A152MA01#
68000pF ±20% GMA085R71A683MA01#
1800pF
±20% GMA0D3B11A182MA01#
0.10µF
33000pF ±20% GMA085B11A333MA01#
±20% GMA05XR72A101MA01#
47000pF ±20% GMA085B11A473MA01#
150pF
±20% GMA05XR72A151MA01#
68000pF ±20% GMA085B11A683MA01#
220pF
±20% GMA05XR72A221MA01#
330pF
±20% GMA05XR72A331MA01#
470pF
±20% GMA05XR72A471MA01#
680pF
±20% GMA05XR72A681MA01#
±20% GMA05XR71E152MA11#
2200pF
±20% GMA05XR71E222MA11#
3300pF
±20% GMA05XR71E332MA11#
4700pF
±20% GMA05XR71E472MA11#
1500pF
±20% GMA05XB31E152MA11#
2200pF
±20% GMA05XB31E222MA11#
3300pF
±20% GMA05XB31E332MA11#
4700pF
±20% GMA05XB31E472MA11#
X7R 6800pF
±20% GMA05XR71A682MA01#
±20% GMA085B11A104MA01#
0.47µF
±20% GMA085R60J474ME12#
B
0.47µF
±20% GMA085B30J474ME12#
LLL
±20% GMA05XR72A102MA01#
0.10µF
X5R
LLA
1000pF
6.3Vdc
GA3
GD
B
±20% GMA085R11A104MA01#
100pF
X7R 1500pF
B
0.10µF
Part Number
GA3
GF
Tol.
LLM
0.4mm 100Vdc X7R
Cap.
GA3
GB
68000pF ±20% GMA085R11A683MA01#
Rated
TC
Voltage Code
10Vdc
±20% GMA085R71A104MA01#
33000pF ±20% GMA085R11A333MA01#
47000pF ±20% GMA085R11A473MA01#
0.5×0.5mm
25Vdc
10000pF ±20% GMA085B31E103MA11#
15000pF ±20% GMA085B31E153MA11#
10Vdc
GR3
X7R 10000pF ±20% GMA085R71E103MA11#
R
T
max.
GRM
0.6mm 100Vdc X7R 3300pF
GRJ
Part Number
Part Number
GR4
Tol.
Tol.
LLR
0.35mm 10Vdc
Cap.
Cap.
GJM
Rated
TC
Voltage Code
Rated
TC
Voltage Code
GQM
T
max.
0.38×0.38mm
T
max.
Part Number List
GA2
GMA Series High Dielectric Constant Type
C02E.pdf
Mar.13,2020
10000pF ±20% GMA05XR71A103MA01#
NFM
15000pF ±20% GMA05XR71A153MA01#
22000pF ±20% GMA05XR71A223MA01#
R
6800pF
±20% GMA05XR11A682MA01#
KRM
10000pF ±20% GMA05XR11A103MA01#
15000pF ±20% GMA05XR11A153MA01#
22000pF ±20% GMA05XR11A223MA01#
6800pF
±20% GMA05XB11A682MA01#
KR3
B
10000pF ±20% GMA05XB11A103MA01#
GMA
15000pF ±20% GMA05XB11A153MA01#
22000pF ±20% GMA05XB11A223MA01#
X5R
0.10µF
±20% GMA05XR60J104ME12#
B
0.10µF
±20% GMA05XB30J104ME12#
GMD
6.3Vdc
T
max.
Rated
TC
Voltage Code
Cap.
Tol.
!Caution
/Notice
0.8×0.8mm
Part Number
0.6mm 100Vdc X7R 1500pF
±20% GMA085R72A152MA01#
2200pF
±20% GMA085R72A222MA01#
Part number # indicates the package specification code.
121
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Wire Bonding/AuSn Soldering Mount Chip Multilayer Ceramic Capacitors for General Purpose
GR3
WEB
Designed specifically for wire bonding and use of gold-tin (AuSn) solder.
The gold-plated external electrodes make these devices suitable for wire bonding or use of gold tin (AuSn) solder.
Au plated layer
Au/Sn solder
Epoxy
*This product is suitable only for wire bonding or use of gold-tin (AuSn) solder. Other mounting methods should not be used.
Ideal for mounting in packages, such as optical communication related devices, IC and etc.
Noise can be reduced by eliminating the routing of the wire, and high efficiency can be achieved
with a built-in capacitor in the package, such as TO-CAN, IC and etc. by wire bonding mounting.
Contributes to the miniaturization of the set.
Specifications
Rated Voltage
Capacitance
Main Applications
0.6×0.3mm to 1.0×0.5mm
e
g
e
6.3Vdc to 50Vdc
T
100pF to 1.0µF
Various device related, such as GaAsIC
(mounted in IC packages)
This catalog contains only a portion of the product lineup.
Please refer to the capacitor search tool on the Murata Web site for details.
L
W
KRM
Size (mm)
NFM
LLR
Murata offers a lineup of small size products, such as the 0603 (0201) and 1005 (0402) in mm (inch).
KR3
3
GMA
2
GA3
GD
Au wire
GA3
GF
LLL
Ni plated layer
GA3
GB
GA2
Au pad
LLA
Foundation Electrode Layer
LLM
Ceramic
GMD
Internal Electrodes
!Caution
/Notice
1
GQM
Features
GJM
GR4
These capacitors have gold-plated electrodes and are designed specifically
for wire bonding and use of gold-tin (AuSn) solder.
GRJ
GMD Series
C02E.pdf
Mar.13,2020
GRM
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
122
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
16Vdc
±10% GMD033B31C272KA11#
150pF
±10% GMD033R71E151KA01#
3300pF
±10% GMD033B31C332KA11#
180pF
±10% GMD033R71E181KA01#
X7R 3900pF
±10% GMD033R71A392KA01#
220pF
±10% GMD033R71E221KA01#
4700pF
±10% GMD033R71A472KA01#
270pF
±10% GMD033R71E271KA01#
5600pF
±10% GMD033R71A562KA01#
330pF
±10% GMD033R71E331KA01#
6800pF
±10% GMD033R71A682KA01#
390pF
±10% GMD033R71E391KA01#
8200pF
±10% GMD033R71A822KA01#
470pF
±10% GMD033R71E471KA01#
560pF
±10% GMD033R71E561KA01#
3900pF
±10% GMD033R11A392KA01#
680pF
±10% GMD033R71E681KA01#
4700pF
±10% GMD033R11A472KA01#
820pF
±10% GMD033R71E821KA01#
5600pF
±10% GMD033R11A562KA01#
1000pF
±10% GMD033R71E102KA01#
6800pF
±10% GMD033R11A682KA01#
1200pF
±10% GMD033R71E122KA01#
8200pF
±10% GMD033R11A822KA01#
1500pF
±10% GMD033R71E152KA01#
100pF
±10% GMD033R11E101KA01#
3900pF
±10% GMD033B11A392KA01#
120pF
±10% GMD033R11E121KA01#
4700pF
±10% GMD033B11A472KA01#
150pF
±10% GMD033R11E151KA01#
5600pF
±10% GMD033B11A562KA01#
180pF
±10% GMD033R11E181KA01#
6800pF
±10% GMD033B11A682KA01#
220pF
±10% GMD033R11E221KA01#
8200pF
±10% GMD033B11A822KA01#
270pF
±10% GMD033R11E271KA01#
330pF
±10% GMD033R11E331KA01#
390pF
±10% GMD033R11E391KA01#
68000pF ±10% GMD033R60J683KE11#
470pF
±10% GMD033R11E471KA01#
82000pF ±10% GMD033R60J823KE11#
560pF
±10% GMD033R11E561KA01#
680pF
±10% GMD033R11E681KA01#
820pF
±10% GMD033R11E821KA01#
68000pF ±10% GMD033B30J683KE11#
1000pF
±10% GMD033R11E102KA01#
82000pF ±10% GMD033B30J823KE11#
1200pF
±10% GMD033R11E122KA01#
1500pF
±10% GMD033R11E152KA01#
100pF
±10% GMD033B11E101KA01#
120pF
±10% GMD033B11E121KA01#
150pF
±10% GMD033B11E151KA01#
180pF
±10% GMD033B11E181KA01#
220pF
±10% GMD033B11E221KA01#
220pF
±10% GMD155R71H221KA01#
270pF
±10% GMD033B11E271KA01#
270pF
±10% GMD155R71H271KA01#
330pF
±10% GMD033B11E331KA01#
330pF
±10% GMD155R71H331KA01#
390pF
±10% GMD033B11E391KA01#
390pF
±10% GMD155R71H391KA01#
470pF
±10% GMD033B11E471KA01#
470pF
±10% GMD155R71H471KA01#
560pF
±10% GMD033B11E561KA01#
560pF
±10% GMD155R71H561KA01#
680pF
±10% GMD033B11E681KA01#
680pF
±10% GMD155R71H681KA01#
10000pF ±10% GMD033R71A103KA01#
R
10000pF ±10% GMD033R11A103KA01#
B
10000pF ±10% GMD033B11A103KA01#
0.10µF
B
±10% GMD033R60J104KE11#
56000pF ±10% GMD033B30J563KE11#
0.10µF
±10% GMD033B30J104KE11#
1.0×0.5mm
T
max.
Rated
TC
Voltage Code
0.55mm 50Vdc
X7R
Cap.
Tol.
Part Number
820pF
±10% GMD033B11E821KA01#
820pF
±10% GMD155R71H821KA01#
1000pF
±10% GMD033B11E102KA01#
1000pF
±10% GMD155R71H102KA01#
1200pF
±10% GMD033B11E122KA01#
1200pF
±10% GMD155R71H122KA01#
1500pF
±10% GMD033B11E152KA01#
1500pF
±10% GMD155R71H152KA01#
X7R 1800pF
±10% GMD033R71C182KA11#
1800pF
±10% GMD155R71H182KA01#
2200pF
±10% GMD033R71C222KA11#
2200pF
±10% GMD155R71H222KA01#
2700pF
±10% GMD033R71C272KA11#
2700pF
±10% GMD155R71H272KA01#
3300pF
±10% GMD033R71C332KA11#
3300pF
±10% GMD155R71H332KA01#
1800pF
±10% GMD033R11C182KA11#
3900pF
±10% GMD155R71H392KA01#
2200pF
±10% GMD033R11C222KA11#
4700pF
±10% GMD155R71H472KA01#
2700pF
±10% GMD033R11C272KA11#
220pF
±10% GMD155R11H221KA01#
R
LLL
X5R 56000pF ±10% GMD033R60J563KE11#
LLA
6.3Vdc
LLM
10Vdc
GR3
GRM
2700pF
GRJ
±10% GMD033R71E121KA01#
GR4
±10% GMD033B31C222KA11#
120pF
GJM
±10% GMD033B31C182KA11#
2200pF
GQM
1800pF
±10% GMD033R71E101KA01#
GA2
B
100pF
GA3
GB
±10% GMD033R11C332KA11#
GA3
GD
3300pF
GA3
GF
R
LLR
B
0.33mm 16Vdc
R
Part number # indicates the package specification code.
NFM
R
Part Number
Part Number
KRM
X7R
Tol.
Tol.
KR3
0.33mm 25Vdc
Cap.
Cap.
GMA
Rated
TC
Voltage Code
Rated
TC
Voltage Code
GMD
T
max.
0.6×0.3mm
T
max.
Part Number List
!Caution
/Notice
GMD Series High Dielectric Constant Type
C02E.pdf
Mar.13,2020
123
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number List
GRM
GMD Series High Dielectric Constant Type
C02E.pdf
Mar.13,2020
Cap.
Tol.
Part Number
33000pF ±10% GMD155R11E333KA11#
±10% GMD155R11H391KA01#
470pF
±10% GMD155R11H471KA01#
5600pF
±10% GMD155B11E562KA01#
560pF
±10% GMD155R11H561KA01#
6800pF
±10% GMD155B11E682KA01#
680pF
±10% GMD155R11H681KA01#
8200pF
±10% GMD155B11E822KA01#
39000pF ±10% GMD155R11E393KA11#
47000pF ±10% GMD155R11E473KA11#
B
820pF
±10% GMD155R11H821KA01#
10000pF ±10% GMD155B11E103KA01#
1000pF
±10% GMD155R11H102KA01#
12000pF ±10% GMD155B11E123KA01#
1200pF
±10% GMD155R11H122KA01#
15000pF ±10% GMD155B11E153KA01#
1500pF
±10% GMD155R11H152KA01#
18000pF ±10% GMD155B11E183KA01#
1800pF
±10% GMD155R11H182KA01#
22000pF ±10% GMD155B11E223KA01#
2200pF
±10% GMD155R11H222KA01#
27000pF ±10% GMD155B31E273KA11#
2700pF
±10% GMD155R11H272KA01#
33000pF ±10% GMD155B31E333KA11#
3300pF
±10% GMD155R11H332KA01#
39000pF ±10% GMD155B31E393KA11#
3900pF
±10% GMD155R11H392KA01#
4700pF
±10% GMD155R11H472KA01#
220pF
±10% GMD155B11H221KA01#
68000pF ±10% GMD155R71C683KA11#
270pF
±10% GMD155B11H271KA01#
82000pF ±10% GMD155R71C823KA11#
330pF
±10% GMD155B11H331KA01#
390pF
±10% GMD155B11H391KA01#
470pF
±10% GMD155B11H471KA01#
68000pF ±10% GMD155R11C683KA11#
560pF
±10% GMD155B11H561KA01#
82000pF ±10% GMD155R11C823KA11#
680pF
±10% GMD155B11H681KA01#
820pF
±10% GMD155B11H821KA01#
1000pF
±10% GMD155B11H102KA01#
68000pF ±10% GMD155B31C683KA11#
1200pF
±10% GMD155B11H122KA01#
82000pF ±10% GMD155B31C823KA11#
1500pF
±10% GMD155B11H152KA01#
1800pF
±10% GMD155B11H182KA01#
2200pF
±10% GMD155B11H222KA01#
2700pF
GRJ
±10% GMD155R11H331KA01#
390pF
R
GR4
330pF
0.55mm 25Vdc
GJM
±10% GMD155R11H271KA01#
GQM
270pF
GA2
Rated
TC
Voltage Code
0.10µF
±10% GMD155R11C104KA11#
0.12µF
±10% GMD155R61A124KE12#
0.15µF
±10% GMD155R61A154KE12#
±10% GMD155B11H272KA01#
0.18µF
±10% GMD155R61A184KE12#
3300pF
±10% GMD155B11H332KA01#
0.22µF
±10% GMD155R61A224KE12#
3900pF
±10% GMD155B11H392KA01#
0.27µF
±10% GMD155R61A274KE11# D1
10Vdc
X5R
4700pF
±10% GMD155B11H472KA01#
0.33µF
±10% GMD155R61A334KE11# D1
X7R 5600pF
±10% GMD155R71E562KA01#
0.39µF
±10% GMD155R61A394KE11# D1
6800pF
±10% GMD155R71E682KA01#
0.47µF
±10% GMD155R61A474KE11# D1
8200pF
±10% GMD155R71E822KA01#
0.12µF
±10% GMD155B31A124KE12#
10000pF ±10% GMD155R71E103KA01#
0.15µF
±10% GMD155B31A154KE12#
12000pF ±10% GMD155R71E123KA01#
0.18µF
±10% GMD155B31A184KE12#
15000pF ±10% GMD155R71E153KA01#
0.22µF
±10% GMD155B31A224KE12#
18000pF ±10% GMD155R71E183KA01#
0.27µF
±10% GMD155B31A274KE11# D1
22000pF ±10% GMD155R71E223KA01#
0.33µF
±10% GMD155B31A334KE11# D1
27000pF ±10% GMD155R71E273KA11#
0.39µF
±10% GMD155B31A394KE11# D1
33000pF ±10% GMD155R71E333KA11#
0.47µF
±10% GMD155B31A474KE11# D1
B
LLA
±10% GMD155B31C104KA11#
LLM
0.10µF
LLL
56000pF ±10% GMD155B31C563KA11#
LLR
B
±10% GMD155R71C104KA11#
56000pF ±10% GMD155R11C563KA11#
GA3
GD
0.10µF
R
GA3
GF
X7R 56000pF ±10% GMD155R71C563KA11#
GA3
GB
47000pF ±10% GMD155B31E473KA11#
16Vdc
39000pF ±10% GMD155R71E393KA11#
GMA
25Vdc
T
max.
NFM
B
Part Number
KRM
R
Tol.
47000pF ±10% GMD155R71E473KA11#
R
5600pF
±10% GMD155R11E562KA01#
6800pF
±10% GMD155R11E682KA01#
8200pF
±10% GMD155R11E822KA01#
GMD
0.55mm 50Vdc
Cap.
KR3
Rated
TC
Voltage Code
10000pF ±10% GMD155R11E103KA01#
12000pF ±10% GMD155R11E123KA01#
!Caution
/Notice
T
max.
GR3
(→ 1.0×0.5mm)
15000pF ±10% GMD155R11E153KA01#
18000pF ±10% GMD155R11E183KA01#
22000pF ±10% GMD155R11E223KA01#
27000pF ±10% GMD155R11E273KA11#
Part number # indicates the package specification code.
124
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Soldering and Mounting ....................................................... 143
1. PCB Design ....................................................................... 143
5. DC Voltage and AC Voltage Characteristics ...... 130
1. Notice for Pattern Forms ...................................... 143
6. Capacitance Aging ........................................................ 130
2. Land Dimensions ....................................................... 144
7. Vibration and Shock...................................................... 131
3. Board Design .............................................................. 148
2. Item to be confirmed for Flow soldering .............. 148
Soldering and Mounting ....................................................... 131
3. Reflow Soldering ............................................................ 149
1. Mounting Position .......................................................... 131
4. Washing ............................................................................. 149
2. Information before Mounting .................................... 132
5. Coating............................................................................... 150
4-3. Correction of Soldered Portion ............................ 136
5. Washing ............................................................................. 137
6. Electrical Test on Printed Circuit Board ............... 137
7. Printed Circuit Board Cropping ................................ 137
8. Assembly........................................................................... 140
9. Die Bonding/Wire Bonding ......................................... 141
Other............................................................................................ 141
1. Under Operation of Equipment ................................ 141
2. Other ................................................................................... 142
GR3
GRJ
GR4
GJM
1. Transportation ................................................................ 150
2. Characteristics Evaluation
in the Actual System .................................................... 150
LLM
4-2. Flow Soldering ............................................................ 135
Other............................................................................................ 150
LLR
4-1. Reflow Soldering ....................................................... 133
NFM
3. Maintenance of the Mounting
(pick and place) Machine ............................................ 132
KRM
4. Type of Applied Voltage and
Self-heating Temperature ......................................... 127
KR3
3. Applied Voltage and Applied Current .................... 127
3. Piezo-electric Phenomenon ...................................... 143
GMA
2. Measurement of Capacitance .................................. 126
2. Atmosphere Surroundings
(gaseous and liquid) ...................................................... 143
GMD
1. Temperature Dependent Characteristics ............ 126
!Caution
/Notice
Rating .......................................................................................... 126
GQM
1. Operating Temperature .............................................. 143
GA2
Rating .......................................................................................... 143
GA3
GB
Storage and Operation Conditions .................................. 126
GA3
GD
Notice
GA3
GF
!Caution
LLL
Target series: GRM, GR3, GRJ, GR4, GJM, GQM, GA2, GA3, LLL, LLA, LLM, LLR, NFM, KRM, KR3,
GMA, GMD
LLA
WEB
!Caution/Notice
GRM
Mar.13,2020
125
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
!Caution
GR4
GJM
GQM
GA2
GA3
GB
1-2. Corrosive gas can react with the termination
(external) electrodes or lead wires of capacitors, and
result in poor solderability. Do not store the
capacitors in an atmosphere consisting of corrosive
gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine,
ammonia gas, etc.).
1-3. Due to moisture condensation caused by rapid
humidity changes, or the photochemical change
caused by direct sunlight on the terminal electrodes
and/or the resin/epoxy coatings, the solderability and
electrical performance may deteriorate. Do not store
capacitors under direct sunlight or in high humidity
conditions.
The water repellency of capacitor surface may
reduce when the capacitor is exposed to high
temperature for long periods of time. Be sure to
confirm if the desired performance can be acquired in
actual use conditions and the actual system.
GA3
GD
1. The performance of chip multilayer ceramic capacitors
and chip EMIFIL NFM series (henceforth just “capacitors”)
may be affected by the storage conditions.
Please use them promptly after delivery.
1-1. Maintain appropriate storage for the capacitors using
the following conditions: Room Temperature of +5 to
+40°C and a Relative Humidity of 20 to 70%.
High temperature and humidity conditions and/or
prolonged storage may cause deterioration of the
packaging materials. If more than six months have
elapsed since delivery, check packaging, mounting,
etc. before use.
In addition, this may cause oxidation of the electrodes.
If more than one year has elapsed since delivery, also
check the solderability before use.
GRJ
GR3
Storage and Operation Conditions
[Example of Temperature Characteristics X5R (R6)]
20
20
15
15
0
-5
-10
LLL
-5
-10
-50
-25
0
25
50
75
Temperature (°C)
100
125
150
-20
-75
-50
-25
0
25
Temperature (°C)
50
75
100
2. Measurement of Capacitance
1. Measure capacitance with the voltage and frequency
specified in the product specifications.
1-1. The output voltage of the measuring equipment may
decrease occasionally when capacitance is high.
Please confirm whether a prescribed measured
voltage is impressed to the capacitor.
1-2. The capacitance values of high dielectric constant
type capacitors change depending on the AC voltage
applied. Please consider the AC voltage
characteristics when selecting a capacitor to be used
in an AC circuit.
Continued on the following page.
GMA
-15
GMD
-20
-75
0
!Caution
-15
5
KRM
5
10
KR3
10
NFM
Sample: 22µF, Rated Voltage 4VDC
Capacitance Change (%)
Capacitance Change (%)
Sample: 0.1µF, Rated Voltage 50VDC
LLR
[Example of Temperature Characteristics X7R (R7)]
LLA
(2) The capacitance may change within the rated
temperature.
When you use a high dielectric constant type
capacitor in a circuit that needs a tight (narrow)
capacitance tolerance (e.g., a time-constant
circuit), please carefully consider the temperature
characteristics, and carefully confirm the various
characteristics in actual use conditions and the
actual system.
1. The electrical characteristics of a capacitor can change
with temperature.
1-1. For capacitors having larger temperature
dependency, the capacitance may change with
temperature changes.
The following actions are recommended in order to
ensure suitable capacitance values.
(1) Select a suitable capacitance for the operating
temperature range.
LLM
1. Temperature Dependent Characteristics
GA3
GF
Rating
126
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
!Caution
Continued from the preceding page.
GR3
3. Applied Voltage and Applied Current
GA2
GQM
GJM
GR4
GRJ
1. Do not apply a voltage to the capacitor that exceeds the
rated voltage as called out in the specifications.
1-1. Applied voltage between the terminals of a capacitor
shall be less than or equal to the rated voltage.
(1) When AC voltage is superimposed on DC voltage,
the zero-to-peak voltage shall not exceed the
rated DC voltage.
When AC voltage or pulse voltage is applied, the
peak-to-peak voltage shall not exceed the rated
DC voltage.
(2) Abnormal voltages (surge voltage, static
electricity, pulse voltage, etc.) shall not exceed
the rated DC voltage.
Typical Voltage Applied to the DC Capacitor
DC Voltage+AC
AC Voltage
Pulse Voltage
GA3
GB
DC Voltage
E
E
E
0
GA3
GD
E
0
0
0
LLL
LLA
LLM
3. The capacitors also have rated currents.
The current flowing between the terminals of a capacitor
shall be less than or equal to the rated current. Using the
capacitor beyond this range could lead to excessive heat.
LLR
1-2. Influence of over voltage
Over voltage that is applied to the capacitor may
result in an electrical short circuit caused by the
breakdown of the internal dielectric layers.
The time duration until breakdown depends on the
applied voltage and the ambient temperature.
2. Use a safety standard certified capacitor in a power
supply input circuit (AC filter), as it is also necessary to
consider the withstand voltage and impulse withstand
voltage defined for each device.
GA3
GF
(E: Maximum possible applied voltage.)
NFM
4. Type of Applied Voltage and Self-heating Temperature
KRM
[Example of Temperature Rise (Heat Generation)
in Chip Multilayer Ceramic Capacitors in Contrast
to Ripple Current]
Sample: R (R1) characteristics 10µF,
Rated voltage: DC10V
GMA
KR3
Ripple Current
100
GMD
10
100kHz
500kHz
1
1MHz
0
1
2
3
4
5
6
Current (Ar.m.s.)
!Caution
Temperature Rise (°C)
1. Confirm the operating conditions to make sure that no large
current is flowing into the capacitor due to the continuous
application of an AC voltage or pulse voltage.
When a DC rated voltage product is used in an AC voltage
circuit or a pulse voltage circuit, the AC current or pulse
current will flow into the capacitor; therefore check the
self-heating condition.
Please confirm the surface temperature of the capacitor so
that the temperature remains within the upper limits of the
operating temperature, including the rise in temperature due
to self-heating. When the capacitor is used with a
high-frequency voltage or pulse voltage, heat may be
generated by dielectric loss.
1-1. The load should be contained so that the self-heating of
the capacitor body remains below 20°C, when
measuring at an ambient temperature of 25°C.
Continued on the following page.
127
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
!Caution
[The sine-wave frequency VS allowable voltage]
Chip (LgW): 3.2g1.6mm
C0G (5C) Char., Rated Voltage: DC250V
1000
to 3,900pF
4,700pF
(250)
6,800pF
10,000pF
100
15,000pF
22,000pF
10
10
100
Frequency [kHz]
1000
1
10
100
Frequency [kHz]
1000
Chip (LgW): 3.2g1.6mm
C0G (5C) char., Rated Voltage: DC500V
1000
to 560pF
(500)
680pF
820pF
1,000pF
100
1
10
100
Frequency [kHz]
1000
GRJ
GR4
GJM
GQM
GA2
GA3
GB
LLL
LLA
LLM
6,800pF
10,000pF
LLR
100
10
10
100
Frequency [kHz]
1000
Chip (LgW): 3.2g1.6mm
C0G (5C) Char., Rated Voltage: DC630V
1000
NFM
100
(250)
KRM
1000
to 3,900pF
4,700pF
to 470pF
560pF
(630V)
680pF
820pF
KR3
10
100
Frequency [kHz]
1000
1,000pF
1,500pF
2,200pF
GMA
1
(200)
Chip (LgW): 2.0g1.25mm
C0G (5C) Char., Rated Voltage: DC250V
3,300pF
100
10
4,700pF
100
Frequency [kHz]
1000
Continued on the following page.
GMD
100
to 330pF
Allowable Sine Wave Voltage [Vp-p]
(250)
1000
Allowable Sine Wave Voltage [Vp-p]
to 1,000pF
Allowable Sine Wave Voltage [Vp-p]
1000
Chip (LgW): 2.0g1.25mm
C0G (5C) char., Rated Voltage: DC200V
Allowable Sine Wave Voltage [Vp-p]
Allowable Sine Wave Voltage [Vp-p]
Allowable Sine Wave Voltage [Vp-p]
The surface temperature of the capacitor: 125°C or less
(including self-heating)
Chip (LgW): 1.6g0.8mm
C0G (5C) Char., Rated Voltage: DC250V
GA3
GD
GA3
GF
1-3. Since the self-heating is low in the low loss series, the
allowable power becomes extremely high compared to
the common X7R (R7) characteristics.
However, when a load with self-heating of 20°C is
applied at the rated voltage, the allowable power may
be exceeded. When the capacitor is used in a
high-frequency voltage circuit of 1kHz or more, the
frequency of the applied voltage should be less than
500kHz sine wave (less than 100kHz for a product
with rated voltage of DC3.15kV), to limit the voltage
load so that the load remains within the derating
shown in the following figure. In the case of non-sine
wave, high-frequency components exceeding the
fundamental frequency may be included. In such a case,
please contact Murata. The excessive generation of
heat may cause deterioration of the characteristics
and reliability of the capacitor.
(Absolutely do not perform measurements while the
cooling fan is operating, as an accurate measurement
may not be performed.)
!Caution
1-2. The load should be contained so that the self-heating
of the capacitor body remains below 20°C, when
measuring at an ambient temperature of 25°C. In
addition, use a K thermocouple of ø0.1mm with less
heat capacity when measuring, and measure in a
condition where there is no effect from the radiant
heat of other components or air flow caused by
convection. Excessive generation of heat may cause
deterioration of the characteristics and reliability of the
capacitor. (Absolutely do not perform measurements
while the cooling fan is operating, as an accurate
measurement may not be performed.)
GR3
Continued from the preceding page.
128
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
!Caution
GR3
Continued from the preceding page.
[The sine-wave frequency VS allowable voltage]
(200)
10,000pF
100
22,000pF
47,000pF
10
1
10
100
Frequency [kHz]
1000
to 680pF
1,000pF
2,200pF
4,700pF
10,000pF
100
22,000pF
47,000pF
10
1
10
100
Frequency [kHz]
1000
4,700pF
(250)
10,000pF
100
22,000pF
47,000pF
10
1
10
100
Frequency [kHz]
1000
10000
to 470pF
1000
1,000pF
2,200pF
4,700pF
100
10
10,000pF
1
10
100
Frequency [kHz]
1000
to 1,000pF
(500)
2,200pF
4,700pF
100
22,000pF
47,000pF
10
1
10
100
Frequency [kHz]
1000
Chip (LgW): 3.2g1.6mm, 3.2g2.5mm
U2J (7U) char., Rated Voltage: DC2kV
10000
to 100pF
150pF
220pF
(2000)
1000
100
1
10
100
Frequency [kHz]
(500)1000
10
100
Frequency [kHz]
KR3
GMA
GMD
to 33pF
47pF
100pF
1
GR4
10,000pF
10000
1000
GA3
GB
GA2
1000
Chip (LgW): 4.5g2.0mm
U2J (7U) char., Rated Voltage: DC3.15kV
(3150)
GJM
GQM
to 2,200pF
Chip (LgW): 3.2g1.6mm, 3.2g2.5mm
4.5g3.2mm, 5.7g5.0mm
U2J (7U) char., Rated Voltage: DC1kV
Allowable Sine Wave Voltage [Vp-p]
1000
(630)
1000
Chip (LgW): 3.2g1.6mm, 3.2g2.5mm
4.5g3.2mm, 5.7g5.0mm
U2J (7U) char., Rated Voltage: DC500V
!Caution
Allowable Sine Wave Voltage [Vp-p]
Allowable Sine Wave Voltage [Vp-p]
Chip (LgW): 3.2g1.6mm, 3.2g2.5mm
4.5g3.2mm, 5.7g5.0mm
U2J (7U) char., Rated Voltage: DC630V
Chip (LgW): 2.0g1.25mm, 3.2g1.6mm
U2J (7U) char., Rated Voltage: DC250V
GA3
GD
4,700pF
1000
GA3
GF
to 2,200pF
10
100
Frequency [kHz]
LLL
1000
1
LLA
Chip (LgW): 2.0g1.25mm, 3.2g1.6mm
U2J (7U) char., Rated Voltage: DC200V
1000
LLM
1000
27 to 47pF
(3150)
LLR
100
Frequency [kHz]
to 22pF
(4000)
NFM
100
10
The capacitors less than 22pF can be
applied maximum 4.0kV peak to peak
at 100kHz or less only for the ballast or
the resonance usage in the CFL inverter
circuit.
KRM
220pF
1,000pF
10000
Allowable Sine Wave Voltage [Vp-p]
to 100pF
Chip (LgW): 4.5g2.0mm
C0G (5C) Char., Rated Voltage: DC3.15kV
Allowable Sine Wave Voltage [Vp-p]
1000
Allowable Sine Wave Voltage [Vp-p]
10000
Allowable Sine Wave Voltage [Vp-p]
Allowable Sine Wave Voltage [Vp-p]
Allowable Sine Wave Voltage [Vp-p]
Chip (LgW): 3.2g1.6mm
C0G char., Rated Voltage: DC1kV
GRJ
The surface temperature of the capacitor: 125°C or less
(including self-heating)
1000
Continued on the following page.
129
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
!Caution
Continued from the preceding page.
GRJ
GR4
20
0
GJM
-20
-40
GQM
-60
-80
-100
0
10
20
30
40
50
GA3
GF
GA3
GD
GA3
GB
GA2
DC Voltage (V)
[Example of AC Voltage Characteristics]
Sample: X7R (R7) Characteristics 10µF,
Rated Voltage 6.3VDC
LLL
2. The capacitance values of high dielectric constant type
capacitors changes depending on the AC voltage applied.
Please consider the AC voltage characteristics when
selecting a capacitor to be used in an AC circuit.
[Example of DC Voltage Characteristics]
Sample: X7R (R7) Characteristics 0.1µF,
Rated Voltage 50VDC
Capacitance Change (%)
1. The capacitance value of a high dielectric constant type
capacitor changes depending on the DC voltage applied.
Please consider the DC voltage characteristics when a
capacitor is selected for use in a DC circuit.
1-1. The capacitance of ceramic capacitors may change
sharply depending on the applied voltage (see figure).
Please confirm the following in order to secure the
capacitance.
(1) Determine whether the capacitance change
caused by the applied voltage is within the
allowed range.
(2) In the DC voltage characteristics, the rate of
capacitance change becomes larger as voltage
increases, even if the applied voltage is below the
rated voltage. When a high dielectric constant
type capacitor is used in a circuit that requires a
tight (narrow) capacitance tolerance (e.g., a time
constant circuit), please carefully consider the
voltage characteristics, and confirm the various
characteristics in the actual operating conditions
of the system.
GR3
5. DC Voltage and AC Voltage Characteristics
LLA
20
10
0
-10
LLM
-20
-30
-40
-50
-60
0
0.5
1
1.5
2
LLR
Capacitance Change (%)
30
NFM
AC Voltage (Vr.m.s.)
KR3
[Example of Change Over Time (Aging Characteristics)]
20
10
-10
-20
C0G (5C)
X7R (R7)
-30
-40
10
GMD
GMA
0
X5R (R6)
100
1000
10000
Time (h)
!Caution
Capacitance Change (%)
1. The high dielectric constant type capacitors have an
Aging characteristic in which the capacitance value
decreases with the passage of time.
When you use high dielectric constant type capacitors in
a circuit that needs a tight (narrow) capacitance
tolerance (e.g., a time-constant circuit), please carefully
consider the characteristics of these capacitors, such as
their aging, voltage, and temperature characteristics. In
addition, check capacitors using your actual appliances at
the intended environment and operating conditions.
KRM
6. Capacitance Aging
Continued on the following page.
130
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
!Caution
Continued from the preceding page.
GR3
7. Vibration and Shock
GJM
GR4
GRJ
1. Please confirm the kind of vibration and/or shock, its
condition, and any generation of resonance.
Please mount the capacitor so as not to generate
resonance, and do not allow any impact on the terminals.
2. Mechanical shock due to being dropped may cause
damage or a crack in the dielectric material of the
capacitor.
Do not use a dropped capacitor because the quality and
reliability may be deteriorated.
Floor
3. When printed circuit boards are piled up or handled, the
corner of another printed circuit board should not be
allowed to hit the capacitor, in order to avoid a crack or
other damage to the capacitor.
GA3
GD
GA3
GB
Mounting printed circuit board
Crack
Soldering and Mounting
It is effective to implement the following measures, to reduce stress
in separating the board.
It is best to implement all of the following three measures; however,
implement as many measures as possible to reduce stress.
Contents of Measures
A > D *1
(2) Add slits in the board separation part.
A>B
(3) Keep the mounting position of the component
away from the board separation surface.
A>C
C
KRM
B
D
[Mounting Capacitors Near Screw Holes]
When a capacitor is mounted near a screw hole, it may be affected
by the board deflection that occurs during the tightening of the
screw. Mount the capacitor in a position as far away from the
screw holes as possible.
Screw Hole
GMA
*1 A > D is valid when stress is added vertically to the perforation as with
Hand Separation.
If a Cutting Disc is used, stress will be diagonal to the PCB, therefore
A > D is invalid.
KR3
Slit
GMD
A
LLL
Stress Level
(1) Turn the mounting direction of the component
parallel to the board separation surface.
Perforation
LLA
[Chip Mounting Close to Board Separation Point]
LLR
(Good Example)
NFM
(Bad Example)
Locate chip
horizontal to
the direction in
which stress
acts.
LLM
[Component Direction]
!Caution
2. If you mount the capacitor near components that
generate heat, take note of the heat from the other
components and carefully check the self-heating of the
capacitor before using.
If there is significant heat radiation from other
components, it could lower the insulation resistance of
the capacitor or produce excessive heat.
GA3
GF
1. Mounting Position
1. Confirm the best mounting position and direction that
minimizes the stress imposed on the capacitor during
flexing or bending the printed circuit board.
1-1. Choose a mounting position that minimizes the
stress imposed on the chip during flexing or bending
of the board.
GA2
GQM
Crack
Recommended
Continued on the following page.
131
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
!Caution
Continued from the preceding page.
GR3
2. Information before Mounting
GA3
GF
GA3
GD
GA3
GB
GA2
GQM
GJM
GR4
GRJ
1. Do not re-use capacitors that were removed from the
equipment.
2. Confirm capacitance characteristics under actual applied
voltage.
3. Confirm the mechanical stress under actual process and
equipment use.
4. Confirm the rated capacitance, rated voltage and other
electrical characteristics before assembly.
5. Prior to use, confirm the solderability of capacitors that
were in long-term storage.
6. Prior to measuring capacitance, carry out a heat
treatment for capacitors that were in long-term storage.
7. The use of Sn-Zn based solder will deteriorate the
reliability of the MLCC.
Please contact our sales representative or product
engineers on the use of Sn-Zn based solder in advance.
8. We have also produced a DVD which shows a summary of
our recommendations, regarding the precautions for
mounting. Please contact our sales representative to
request the DVD.
3. Maintenance of the Mounting (pick and place) Machine
[Incorrect]
LLA
LLL
Suction Nozzle
Deflection
Board Guide
LLM
[Correct]
Board
Support Pin
GMA
KR3
KRM
NFM
2. Dirt particles and dust accumulated in the suction nozzle
and suction mechanism prevent the nozzle from moving
smoothly. This creates excessive force on the capacitor
during mounting, causing cracked chips. Also, the locating
claw, when worn out, imposes uneven forces on the chip
when positioning, causing cracked chips. The suction
nozzle and the locating claw must be maintained,
checked, and replaced periodically.
LLR
1. Make sure that the following excessive forces are not
applied to the capacitors. Check the mounting in the
actual device under actual use conditions ahead of time.
1-1. In mounting the capacitors on the printed circuit
board, any bending force against them shall be kept
to a minimum to prevent them from any damage or
cracking. Please take into account the following
precautions and recommendations for use in your
process.
(1) Adjust the lowest position of the pickup nozzle so
as not to bend the printed circuit board.
!Caution
GMD
3. To adjust the inspection tolerance for automated
appearance sorting machine of mounting position,
because ZRA/ZRB series are easier to shift the mounting
position than standard MLCC.
4. To check the overturn and reverse of chip.
5. To control mounting speed carefully, because ZRA/ZRB
series is heavier than standard MLCC.
Continued on the following page.
132
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
!Caution
Continued from the preceding page.
Temperature (°C)
02/03/15/18/1U/21/31
GRM/GR3/GRJ/GXM/
32/42/43/52/55
GR4/GA2/GA3/KRM/KR3
LLA/LLM
18/21/31
GQM
22
∆T<
=130°C
Recommended Conditions
Pb-Sn Solder
Lead Free Solder
Peak Temperature
230 to 250°C
240 to 260°C
Atmosphere
Air
Air or N2
GR4
GJM
280
GA3
GB
LLL
∆T<
=190°C
[Allowable Reflow Soldering Temperature and Time]
270
GA3
GD
01/02/MD/03/15/18/
JN/21/31
GA2
Temperature
Incase of Lead Free Solder
( ): In case of Pb-Sn Solder
GQM
Time
260
250
240
GA3
GF
GRM/GRJ/GXM/GR4/
GJM/GQM/LLR/NFM/
GJ4/ZRA/ZRB/KRM
Preheating
230
220
0
30
60
90
120
Soldering Time (s)
In the case of repeated soldering, the accumulated
soldering time must be within the range shown above.
LLL
Temperature
Differential
∆T
60-120 seconds 30-60 seconds
Soldering Temperature (°C)
Chip Dimension Code
(L/W)
Gradual
Cooling
190°C (170°C)
170°C (150°C)
150°C (130°C)
Table 1
Series
Soldering
Peak Temperature
220°C (200°C)
GRJ
[Example of Temperature Conditions for Reflow Soldering]
LLA
1. When sudden heat is applied to the components, the
mechanical strength of the components will decrease
because a sudden temperature change causes
deformation inside the components. In order to prevent
mechanical damage to the components, preheating is
required for both the components and the PCB.
Preheating conditions are shown in table 1. It is required to
keep the temperature differential between the solder and
the components surface (∆T) as small as possible.
2. When components are immersed in solvent after mounting,
be sure to maintain the temperature difference (∆T)
between the component and the solvent within the range
shown in table 1.
GR3
4-1. Reflow Soldering
LLM
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
!Caution
Continued on the following page.
GMD
GMA
KR3
KRM
NFM
LLR
3. When a capacitor is mounted at a temperature lower
than the peak reflow temperature recommended by the
solder manufacturer, the following quality problems can
occur. Consider factors such as the placement of
peripheral components and the reflow temperature
setting to prevent the capacitor’s reflow temperature
from dropping below the peak temperature specified. Be
sure to evaluate the mounting situation beforehand and
verify that none of the following problems occur.
• Drop in solder wettability
• Solder voids
• Possible occurrence of whiskering
• Drop in bonding strength
• Drop in self-alignment properties
• Possible occurrence of tombstones and/or shifting on
the land patterns of the circuit board
133
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
!Caution
Continued from the preceding page.
GR3
GR4
GJM
0.25
0.3
0.75
0.95
NFMJMPC
0.3
NFM15CC/15PC
GRJ
[Guideline of solder paste thickness]
100-150µm: NFM15/18/21/3D/31
100-200µm: NFM41
0.5
0.25
0.7
1.3
0.9
GA3
GB
GA3
GD
NFM21PS
0.4
0.6
0.85
1.25
1.85
0.8
1.9
0.6
NFM21CC/21PC
0.8
1.2
2.0
0.6
1.4
2.6
LLA
LLL
0.8
1.2
1.6
1.8
2.6
GA3
GF
0.05
GA2
0.4
0.4
1.0
2.2
1.2
0.6
1.2
NFM18PS
0.1
NFM18CC/18PC
GQM
1.4
0.4
4. Optimum Solder Amount for Reflow Soldering
4-1. Overly thick application of solder paste results in a
excessive solder fillet height.
This makes the chip more susceptible to mechanical
and thermal stress on the board and may cause the
chips to crack.
4-2. Too little solder paste results in a lack of adhesive
strength on the termination, which may result in
chips breaking loose from the PCB.
4-3. Please confirm that solder has been applied
smoothly to the termination. (Only ZRA/ZRB Series:
The solder applied to the end surface of chip may
cause loss suppress acoustic noise.)
NFM
1.0
2.5
4.4
LLR
1.2
2.6
0.6
0.8
2.0
1.0
2.5
3.9
LLM
NFM31PC/31KC
0.6
NFM3DCC/3DPC
KRM
2.6
1.0
0.6
NFM41CC/41PC
the PCB.
Continued on the following page.
!Caution
Inverting the PCB
Make sure not to impose any abnormal mechanical shocks to
GMD
GMA
KR3
1.5
3.5
5.5
134
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
!Caution
Continued from the preceding page.
Temperature (°C)
18/21/31
NFM
3D/31/41
GR4
GRJ
∆T<
=150°C
GJM
21/31
Preheating
2. When sudden heat is applied to the components, the
mechanical strength of the components will decrease
because a sudden temperature change causes
deformation inside the components. In order to prevent
mechanical damage to the components, preheating is
required for both of the components and the PCB.
Preheating conditions are shown in table 2. It is required
to keep the temperature differential between the solder
and the components surface (∆T) as low as possible.
3. Excessively long soldering time or high soldering
temperature can result in leaching of the terminations,
causing poor adhesion or a reduction in capacitance value
due to loss of contact between the inner electrodes and
terminations.
4. When components are immersed in solvent after
mounting, be sure to maintain the temperature
differential (∆T) between the component and solvent
within the range shown in the table 2.
30-90 seconds
Time
5 seconds max.
[Allowable Flow Soldering Temperature and Time]
GA2
LLL
Preheating
Peak
Temperature
280
270
260
GA3
GB
18/21
250
240
230
220
0
10
20
30
40
Soldering Time (s)
In the case of repeated soldering, the accumulated
soldering time must be within the range shown above.
LLL
18/21/31
GQM
Gradual
Cooling
∆T
LLA
GRM
Soldering
Soldering
Peak
Temperature
Soldering Temperature (°C)
Series
Temperature
Differential
Preheating Peak Temperature
90 to 110°C
100 to 120°C
140 to 160°C (NFM)
Soldering Peak Temperature
240 to 250°C
250 to 260°C
Atmosphere
Air
Air or N2
LLR
Lead Free Solder
LLM
Recommended Conditions
Pb-Sn Solder
GQM
Chip Dimension
Code (L/W)
GA3
GD
Table 2
GRJ
[Example of Temperature Conditions for Flow Soldering]
GA3
GF
1. Do not apply flow soldering to chips not listed in table 2.
GR3
4-2. Flow Soldering
NFM
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
GMA
KR3
KRM
5. Optimum Solder Amount for Flow Soldering
5-1. The top of the solder fillet should be lower than the
thickness of the components. If the solder amount is
excessive, the risk of cracking is higher during board
bending or any other stressful condition.
Adhesive
in section
Continued on the following page.
!Caution
GMD
Up to Chip Thickness
135
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
!Caution
Series
Chip Dimension Code
(L/W)
Temperature of
Soldering Iron Tip
Preheating
Temperature
Temperature
Differential (∆T)
Atmosphere
GRM/GRJ/GXM/GJM/GQM/GJ4
03/15/18/JN/21/31/32
350°C max.
150°C min.
∆T<
=190°C
Air
GRJ/GRM/GR4/GA2/GA3
32/42/43/52/55
GQM
22
280°C max.
150°C min.
∆T<
=130°C
Air
150°C min.
∆T<
=190°C
Air
350°C max.
15
340°C max.
GRJ
GR4
GJM
GQM
LLA
LLL
*Applicable for both Pb-Sn and Lead Free Solder.
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
*Please manage ∆T in the temperature of soldering iron and the preheating temperature.
* Please do not rework with soldering iron for NFMJM series due to cracking concern.
Distance
5mm or more
Hot Air Application Angle
45° *Figure 1
Hot Air Temperature Nozzle Outlet
400°C max.
Application Time
LLM
Table 4
Less than 10 seconds
(Chip (LgW): 3.2g1.6mm or smaller)
Less than 30 seconds
(Chip (LgW): 3.2g2.5mm or larger)
KRM
[*Figure 1]
KR3
2. Correction with Spot Heater
Compared to local heating with a soldering iron, hot air
heating by a spot heater heats the overall component and
board, therefore, it tends to lessen the thermal shock. In
the case of a high density mounted board, a spot heater
can also prevent concerns of the soldering iron making
direct contact with the component.
2-1. If the distance from the hot air outlet of the spot
heater to the component is too close, cracks may
occur due to thermal shock. To prevent this problem,
follow the conditions shown in Table 4.
2-2. In order to create an appropriate solder fillet shape, it
is recommended that hot air be applied at the angle
shown in Figure 1.
GA2
GA3
GF
18/21/3D/31/41
LLR
NFM
NFM
Table 3
GA3
GB
1. Correction with a Soldering Iron
1-1. In order to reduce damage to the capacitor, be sure
to preheat the capacitor and the mounting board.
Preheat to the temperature range shown in Table 3.
A hot plate, hot air type preheater, etc. can be used
for preheating.
1-2. After soldering, do not allow the component/PCB to
cool down rapidly.
1-3. Perform the corrections with a soldering iron as
quickly as possible. If the soldering iron is applied too
long, there is a possibility of causing solder leaching
on the terminal electrodes, which will cause
deterioration of the adhesive strength and other
problems.
When sudden heat is applied to the capacitor, distortion
caused by the large temperature difference occurs
internally, and can be the cause of cracks. Capacitors also
tend to be affected by mechanical and thermal stress
depending on the board preheating temperature or the
soldering fillet shape, and can be the cause of cracks. Please
refer to "1. PCB Design" or "3. Optimum solder amount" for
the solder amount and the fillet shapes.
Do not correct with a soldering iron for ZRA/ZRB series.
Correction with a soldering iron for ZRA/ZRB series may
cause loss suppress acoustic noise, because the solder
amount become excessive.
GA3
GD
4-3. Correction of Soldered Portion
GR3
Continued from the preceding page.
One-hole Nozzle
in section
Continued on the following page.
GMD
Solder Amount
!Caution
3. Optimum solder amount when re-working with a soldering iron
3-1. If the solder amount is excessive, the risk of cracking is
higher during board bending or any other stressful
condition.
Too little solder amount results in a lack of adhesive
strength on the termination, which may result in chips
breaking loose from the PCB.
Please confirm that solder has been applied smoothly and
rising to the end surface of the chip.
GMA
an Angle of 45°
136
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
!Caution
GRJ
GR4
26
(in mm)
GQM
Tip of Soldering Iron
Tip temperature: 350°C or less/
5 sec. or less/60W or less
Copper Land
Apply the tip of the soldering iron only
on the terminal portion, without touching
the body of the chip.
GA3
GD
GA3
GB
Wire Solder
GA3
GF
Cross Section
LLL
5. Washing
[Not Recommended]
Peeling
Test-probe
KRM
[Recommended]
KR3
Support Pin
GMA
Test-probe
7. Printed Circuit Board Cropping
GMD
[Bending]
!Caution
1. After mounting a capacitor on a printed circuit board, do
not apply any stress to the capacitor that causes bending
or twisting the board.
1-1. In cropping the board, the stress as shown at right
may cause the capacitor to crack.
Cracked capacitors may cause deterioration of the
insulation resistance, and result in a short.
Avoid this type of stress to a capacitor.
NFM
6. Electrical Test on Printed Circuit Board
LLR
LLM
LLA
Excessive ultrasonic oscillation during cleaning can cause
the PCBs to resonate, resulting in cracked chips or broken
solder joints. Before starting your production process, test
your cleaning equipment/process to insure it does not
degrade the capacitors.
1. Confirm position of the support pin or specific jig, when
inspecting the electrical performance of a capacitor after
mounting on the printed circuit board.
1-1. Avoid bending the printed circuit board by the
pressure of a test-probe, etc.
The thrusting force of the test probe can flex the
PCB, resulting in cracked chips or open solder joints.
Provide support pins on the back side of the PCB to
prevent warping or flexing. Install support pins as
close to the test-probe as possible.
1-2. Avoid vibration of the board by shock when a
test-probe contacts a printed circuit board.
GJM
17
GA2
R0.5
ø6.5
3-2. A soldering iron with a tip of ø3mm or smaller should
be used. It is also necessary to keep the soldering iron
from touching the components during the re-work.
3-3. Solder wire with ø0.5mm or smaller is required for
soldering.
4. For the shape of the soldering iron tip, refer to the figure
on the right.
Regarding the type of solder, use a wire diameter of
ø0.5mm or less (rosin core wire solder).
4-1. How to Apply the Soldering Iron
Apply the tip of the soldering iron against the lower
end of the metal terminal.
1) In order to prevent cracking caused by sudden
heating of the ceramic device, do not touch the
ceramic base directly.
2) In order to prevent deviations and dislocating of
the chip, do not touch the junction of the chip and
the metal terminal, and the metal portion on the
outside directly.
4-2. Appropriate Amount of Solder
The amount of solder for corrections by soldering iron,
should be lower than the height of the lower side of
the chip.
GR3
Continued from the preceding page.
[Twisting]
Continued on the following page.
137
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
!Caution
Continued from the preceding page.
High
Recommended
g
(3) Router Type Separator
Medium
Medium
Low
q*
q*
n
· Board handling
· Layout of slits
· Board bending direction
· Design of V groove
· Layout of capacitors
· Arrangement of blades
Board handling
GA2
Notes
GQM
· Board handling
Hand and nipper
separation apply a high
level of stress.
Use another method.
· Controlling blade life
GA3
GD
* When a board separation jig or disc separator is used, if the following precautions are not observed, a large board deflection stress will occur and the capacitors
may crack. Use router type separator if at all possible.
[Outline of Jig]
Printed Circuit Board
V-groove
LLA
Board Cropping Jig
LLM
(1) Example of a suitable jig
[In the case of Single-side Mounting]
An outline of the board separation jig is shown as
follows. Recommended example: Stress on the
component mounting position can be minimized by
holding the portion close to the jig, and bend in the
direction towards the side where the capacitors
are mounted. Not recommended example: The risk
of cracks occurring in the capacitors increases due
to large stress being applied to the component
mounting position, if the portion away from the jig
is held and bent in the direction opposite the side
where the capacitors are mounted.
GJM
Level of stress on board
Board Separation Apparatus
(2) Disc Separator
GA3
GB
(1) Board Separation Jig
GA3
GF
Hand Separation
Nipper Separation
LLL
Board Separation Method
GR4
GRJ
GR3
2. Check the cropping method for the printed circuit board
in advance.
2-1. Printed circuit board cropping shall be carried out by
using a jig or an apparatus (Disc separator, router
type separator, etc.) to prevent the mechanical
stress that can occur to the board.
Recommended
Direction of Load
Direction of Load
Load Point
Continued on the following page.
KRM
(Measures)
(1) Consider introducing a router type separator.
If it is difficult to introduce a router type separator,
implement the following measures. (Refer to item 1.
Mounting Position)
(2) Mount the components parallel to the board
separation surface.
(3) When mounting components near the board
separation point, add slits in the separation position
near the component.
(4) Keep the mounting position of the components
away from the board separation point.
KR3
Components
GMA
[In the case of Double-sided Mounting]
Since components are mounted on both sides of the
board, the risk of cracks occurring can not be
avoided with the above method.
Therefore, implement the following measures to
prevent stress from being applied to the
components.
Printed Circuit Board
GMD
Load Point
NFM
Components
!Caution
Printed Circuit Board
Not Recommended
LLR
Hand Separation
138
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
!Caution
Top Blade
Printed Circuit Board
Top Blade
GJM
[Principle of Operation]
Bottom Blade
GQM
V-groove
[Cross-section Diagram]
GA2
Printed Circuit Board
GA3
GB
V-groove
GA3
GD
Disc Separator
Not Recommended
Top-bottom Misalignment
Left-right Misalignment
Front-rear Misalignment
Top Blade
Top Blade
Top Blade
Bottom Blade
Bottom Blade
Bottom Blade
Bottom Blade
V-groove Design
Not Recommended
Left-right Misalignment
Low-Angle
Depth too Shallow
Depth too Deep
GMA
KR3
Router
Continued on the following page.
GMD
[Outline Drawing]
!Caution
(3) Example of Router Type Separator
The router type separator performs cutting by a
router rotating at a high speed. Since the board
does not bend in the cutting process, stress on
the board can be suppressed during board
separation.
When attaching or removing boards to/from the
router type separator, carefully handle the boards
to prevent bending.
KRM
NFM
LLR
Example of Recommended
V-groove Design
LLM
LLA
LLL
Top Blade
GA3
GF
Recommended
GRJ
[Outline of Machine]
GR4
(2) Example of a Disc Separator
An outline of a disc separator is shown as follows.
As shown in the Principle of Operation, the top
blade and bottom blade are aligned with the
V-grooves on the printed circuit board to
separate the board.
In the following case, board deflection stress will
be applied and cause cracks in the capacitors.
(1) When the adjustment of the top and bottom
blades are misaligned, such as deviating in the
top-bottom, left-right or front-rear directions
(2) The angle of the V groove is too low, depth of
the V groove is too shallow, or the V groove is
misaligned top-bottom
IF V groove is too deep, it is possible to brake
when you handle and carry it. Carefully design
depth of the V groove with consideration about
strength of material of the printed circuit board.
GR3
Continued from the preceding page.
139
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
!Caution
Continued from the preceding page.
GRJ
GR4
GJM
GQM
GA3
GF
GA3
GD
GA3
GB
GA2
Suction Nozzle
NFM
LLR
LLM
LLA
LLL
Component with Leads
KR3
KRM
Socket
GMD
GMA
Screwdriver
!Caution
1. Handling
If a board mounted with capacitors is held with one hand,
the board may bend. Firmly hold the edges of the board
with both hands when handling.
If a board mounted with capacitors is dropped, cracks
may occur in the capacitors.
Do not use dropped boards, as there is a possibility that
the quality of the capacitors may be impaired.
2. Attachment of Other Components
2-1. Mounting of Other Components
Pay attention to the following items, when mounting
other components on the back side of the board
after capacitors have been mounted on the opposite
side.
When the bottom dead point of the suction nozzle is
set too low, board deflection stress may be applied
to the capacitors on the back side (bottom side), and
cracks may occur in the capacitors.
· After the board is straightened, set the bottom
dead point of the nozzle on the upper surface of the
board.
· Periodically check and adjust the bottom dead point.
2-2. Inserting Components with Leads into Boards
When inserting components (transformers, IC, etc.)
into boards, bending the board may cause cracks in
the capacitors or cracks in the solder.
Pay attention to the following.
· Increase the size of the holes to insert the leads, to
reduce the stress on the board during insertion.
· Fix the board with support pins or a dedicated jig
before insertion.
· Support below the board so that the board does not
bend. When using support pins on the board,
periodically confirm that there is no difference in
the height of each support pin.
2-3. Attaching/Removing Sockets and/or Connectors
Insertion and removal of sockets and connectors,
etc., might cause the board to bend. Please insure
that the board does not warp during insertion and
removal of sockets and connectors, etc., or the
bending may damage mounted components on the
board.
2-4. Tightening Screws
The board may be bent, when tightening screws, etc.
during the attachment of the board to a shield or
chassis.
Pay attention to the following items before
performing the work.
· Plan the work to prevent the board from bending.
· Use a torque screwdriver, to prevent
over-tightening of the screws.
· The board may bend after mounting by reflow
soldering, etc. Please note, as stress may be applied
to the chips by forcibly flattening the board when
tightening the screws.
GR3
8. Assembly
Continued on the following page.
140
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
!Caution
Continued from the preceding page.
GR3
9. Die Bonding/Wire Bonding
GA3
GD
GA3
GB
GA2
GQM
GJM
GR4
GRJ
1. Die Bonding of Capacitors
1-1. Use the following materials for the Brazing alloys:
Au-Sn (80/20) 300 to 320 °C in N2 atmosphere
1-2. Mounting
(1) Control the temperature of the substrate so it
matches the temperature of the brazing alloy.
(2) Place the brazing alloy on the substrate and place
the capacitor on the alloy. Hold the capacitor and
gently apply the load. Be sure to complete the
operation within 1 minute.
2. Wire Bonding
2-1. Wire
Gold wire: 25 micro m (0.001 inch) diameter
2-2. Bonding
(1) Thermo compression, ultrasonic ball bonding.
(2) Required stage temperature: 150 to 200 °C
(3) Required wedge or capillary weight: 0.2N to 0.5N
(4) Bond the capacitor and base substrate or other
devices with gold wire.
GA3
GF
Other
1. Under Operation of Equipment
Continued on the following page.
!Caution
GMD
GMA
KR3
KRM
NFM
LLR
LLM
LLA
LLL
1-1. Do not touch a capacitor directly with bare hands
during operation in order to avoid the danger of an
electric shock.
1-2. Do not allow the terminals of a capacitor to come in
contact with any conductive objects (short-circuit).
Do not expose a capacitor to a conductive liquid,
including any acid or alkali solutions.
1-3. Confirm the environment in which the equipment will
operate is under the specified conditions.
Do not use the equipment under the following
environments.
(1) Being spattered with water or oil.
(2) Being exposed to direct sunlight.
(3) Being exposed to ozone, ultraviolet rays, or
radiation.
(4) Being exposed to toxic gas (e.g., hydrogen sulfide,
sulfur dioxide, chlorine, ammonia gas, etc.)
(5) Any vibrations or mechanical shocks exceeding the
specified limits.
(6) Moisture condensing environments. (GXM Series:
Terrible moisture condensing environments).
1-4. Use damp proof countermeasures if using under any
conditions that can cause condensation. (GXM Series:
Use damp proof countermeasures if using under any
conditions that can cause terrible condensation).
141
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
!Caution
GRJ
GR4
GJM
GQM
GA2
GA3
GB
GA3
GD
GA3
GF
LLL
LLA
LLM
2-5. Remarks
Failure to follow the cautions may result, worst case,
in a short circuit and smoking when the product is
used.
The above notices are for standard applications and
conditions. Contact us when the products are used in
special mounting conditions.
Select optimum conditions for operation as they
determine the reliability of the product after
assembly.
The data herein are given in typical values, not
guaranteed ratings.
LLR
zero cross
NFM
0V
KRM
Voltage sine wave
KR3
*ZERO CROSS is the point where voltage sine wave
passes 0V. - See the figure at right -
GMA
(2) Voltage Applied Method
The capacitor's lead or terminal should be firmly
connected to the output of the withstanding
voltage test equipment, and then the voltage
should be raised from near zero to the test
voltage.
If the test voltage is applied directly to the
capacitor without raising it from near zero, it
should be applied with the zero cross. *At the end
of the test time, the test voltage should be
reduced to near zero, and then capacitor's lead or
terminals should be taken off the output of the
withstanding voltage test equipment.
If the test voltage applied directly to the
capacitor without raising it from near zero, surge
voltage may occur and cause a defect.
GMD
2-1. In an Emergency
(1) If the equipment should generate smoke, fire, or
smell, immediately turn off or unplug the
equipment.
If the equipment is not turned off or unplugged, the
hazards may be worsened by supplying continuous
power.
(2) In this type of situation, do not allow face and
hands to come in contact with the capacitor or
burns may be caused by the capacitor's high
temperature.
2-2. Disposal of Waste
When capacitors are disposed of, they must be burned
or buried by an industrial waste vendor with the
appropriate licenses.
2-3. Circuit Design
(1) Addition of Fail Safe Function
Capacitors that are cracked by dropping or bending
of the board may cause deterioration of the
insulation resistance, and result in a short.
If the circuit being used may cause an electrical
shock, smoke or fire when a capacitor is shorted,
be sure to install fail-safe functions, such as a fuse,
to prevent secondary accidents.
(2) Capacitors used to prevent electromagnetic
interference in the primary AC side circuit, or as a
connection/insulation, must be a safety standard
certified product, or satisfy the contents stipulated
in the Electrical Appliance and Material Safety Law.
Install a fuse for each line in case of a short.
(3) The GRM, GR3, GRJ, GXM, GJM, GQM, LLL, LLA,
LLM, LLR, NFM, GJ4, ZRA, ZRB, KRM, KR3, GMA
and GMD series are not safety standard certified
products.
2-4. Test Condition for AC Withstanding Voltage
(1) Test Equipment
Test equipment for AC withstanding voltage
should be made with equipment capable of
creating a wave similar to a 50/60Hz sine wave.
!Caution
2. Other
GR3
Continued from the preceding page.
142
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
Notice
1. When using high dielectric constant type capacitors in AC
or pulse circuits, the capacitor itself vibrates at specific
frequencies and noise may be generated.
Moreover, when the mechanical vibration or shock is
added to the capacitor, noise may occur.
GQM
GA2
2. Atmosphere Surroundings (gaseous and liquid)
LLA
LLL
GA3
GF
GA3
GD
GA3
GB
1. Restriction on the operating environment of capacitors.
1-1. Capacitors, when used in the above, unsuitable,
operating environments may deteriorate due to the
corrosion of the terminations and the penetration of
moisture into the capacitor.
1-2. The same phenomenon as the above may occur when
the electrodes or terminals of the capacitor are subject
to moisture condensation.
1-3. The deterioration of characteristics and insulation
resistance due to the oxidization or corrosion of
terminal electrodes may result in breakdown when the
capacitor is exposed to corrosive or volatile gases or
solvents for long periods of time.
NFM
KRM
KR3
Notice
1-4. Because noise is suppressed by shunting unwanted
high-frequency components to the ground, when
designing a land for the NFM series, design the
ground pattern to be as large as possible in order to
better bring out this characteristic.
As shown in the figure below, noise countermeasures
can be made more effective by using a via to connect
the ground pattern on the chip mounting surface to a
larger ground pattern on the inner layer.
GMA
1-3. If you are replacing by smaller capacitors, you should
not only consider the Land size change but also
consider changing the Wiring Width, Wiring direction,
and copper foil thickness because the risk of chip
cracking is increased with just a Land size change.
GMD
1. PCB Design
LLR
LLM
Soldering and Mounting
1. Notice for Pattern Forms
1-1. Unlike leaded components, chip components are
susceptible to flexing stresses since they are
mounted directly on the substrate.
They are also more sensitive to mechanical and
thermal stresses than leaded components.
Excess solder fillet height can multiply these stresses
and cause chip cracking. When designing substrates,
take land patterns and dimensions into consideration
to eliminate the possibility of excess solder fillet
height.
1-2. There is a possibility of chip cracking caused by PCB
expansion/contraction with heat, because stress on
a chip is different depending on PCB material and
structure. When the thermal expansion coefficient
greatly differs between the board used for mounting
and the chip, it will cause cracking of the chip due to
the thermal expansion and contraction.
When capacitors are mounted on a fluorine resin
printed circuit board or on a single-layered glass
epoxy board, it may also cause cracking of the chip
for the same reason.
GR4
3. Piezo-electric Phenomenon
1. The operating temperature limit depends on the capacitor.
1-1. Do not apply temperatures exceeding the maximum
operating temperature.
It is necessary to select a capacitor with a suitable
rated temperature that will cover the operating
temperature range.
It is also necessary to consider the temperature
distribution in equipment and the seasonal
temperature variable factor.
1-2. Consider the self-heating factor of the capacitor.
The surface temperature of the capacitor shall not
exceed the maximum operating temperature including
self-heating.
GJM
1. Operating Temperature
GRJ
GR3
Rating
Continued on the following page.
143
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
Notice
Continued from the preceding page.
Prohibited
GR3
Pattern Forms
Correct
Solder Resist
GR4
Electrode Pattern
in section
in section
Lead Wire
Solder Resist
GQM
Placing
of Chip Components
and Leaded Components
GJM
Placing Close to Chassis
GRJ
Chassis
Solder (ground)
in section
GA2
in section
Soldering Iron
Placing
of Leaded Components
after Chip Component
Lead Wire
GA3
GB
Solder Resist
in section
GA3
GD
in section
Solder Resist
Chip Capacitor
LLA
Land
LLM
c
a
Solder Resist
LLR
b
b
c
GQM/GR3/GRJ/GRM
18
1.6g0.8
0.6 to 1.0
0.8 to 0.9
0.6 to 0.8
GQM/GR3/GRJ/GRM
21
2.0g1.25
1.0 to 1.2
0.9 to 1.0
0.8 to 1.1
GR3/GRJ/GRM
31
3.2g1.6
2.2 to 2.6
1.0 to 1.1
1.0 to 1.4
LLL
21
1.25g2.0
0.4 to 0.7
0.5 to 0.7
1.4 to 1.8
LLL
31
1.6g3.2
0.6 to 1.0
0.8 to 0.9
2.6 to 2.8
KRM
a
KR3
Chip (LgW)
(in mm)
Continued on the following page.
GMA
Chip Dimension Code
(L/W)
GMD
Series
NFM
Table 1 Flow Soldering Method
Notice
2. Land Dimensions
2-1. Please refer to the land dimensions in table 1 for flow
soldering, table 2 for reflow soldering, table 3 for
reflow soldering for ZRB Series, table 4 for reflow
soldering for LLA Series, table 5 for reflow soldering
for LLM Series, table 6 and 7 for reflow soldering for
ZRA Series.
Please confirm the suitable land dimension by
evaluating of the actual SET / PCB.
LLL
GA3
GF
Lateral Mounting
144
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
Notice
Continued from the preceding page.
0.125 to 0.145
0.12 to 0.18
0.2 to 0.23
GRM
MD
0.5g0.25
0.17 to 0.23
0.22 to 0.28
0.25 to 0.30
0.6g0.3 (±0.03)
0.2 to 0.25
0.2 to 0.3
0.25 to 0.35
GRM/GJM
03
0.6g0.3 (±0.05)
0.2 to 0.25
0.25 to 0.35
0.3 to 0.4
0.6g0.3 (±0.09)
0.23 to 0.3
0.25 to 0.35
0.3 to 0.4
1.0g0.5 (within ±0.10)
0.3 to 0.5
0.35 to 0.45
0.4 to 0.6
1.0g0.5 (±0.15/±0.20)
0.4 to 0.6
0.4 to 0.5
0.5 to 0.7
1.6g0.8 (within ±0.10)
0.6 to 0.8
0.6 to 0.7
0.6 to 0.8
GRM/GXM/GJM
15
GRM/GXM/GJM/GQM
18
1.6g0.8 (±0.15/±0.20)
0.7 to 0.9
0.7 to 0.8
0.8 to 1.0
GRM
JN
1.8g1.0
0.8 to 0.9
0.6 to 0.8
0.9 to 1.1
GQM
21
2.0g1.25
1.0 to 1.2
0.6 to 0.7
0.8 to 1.1
2.0×g1.25 (within ±0.10)
1.2
0.6
1.25
2.0g1.25 (±0.15)
1.2
0.6 to 0.8
1.2 to 1.4
2.0g1.25 (±0.20)
1.0 to 1.4
0.6 to 0.8
1.2 to 1.4
2.8g2.8
2.2 to 2.5
0.8 to 1.0
1.9 to 2.3
3.2g1.6 (within ±0.20)
1.8 to 2.0
0.9 to 1.2
1.5 to 1.7
3.2g1.6 (±0.30)
1.9 to 2.1
1.0 to 1.3
1.7 to 1.9
GRM/GXM/GRJ/GJ4
21
GQM
22
GRM/GXM/GRJ/GJ4
31
GRM/GXM/GRJ
32
3.2g2.5
2.0 to 2.4
1.0 to 1.2
1.8 to 2.3
GA2/GA3/GR4
42
4.5g2.0
2.8 to 3.4
1.2 to 1.4
1.4 to 1.8
GR3/GRJ/GRM/GA2/
GA3/GR4
43
4.5g3.2
3.0 to 3.5
1.2 to 1.4
2.3 to 3.0
GA2/GA3
52
5.7g2.8
4.0 to 4.6
1.4 to 1.6
2.1 to 2.6
GR3/GRJ/GRM/GA2/
GA3/GR4
55
5.7g5.0
4.0 to 4.6
1.4 to 1.6
3.5 to 4.8
LLL
15
0.5g1.0
0.15 to 0.2
0.2 to 0.25
0.7 to 1.0
LLL
1U
0.6g1.0
0.20 to 0.25
0.25 to 0.35
0.7 to 1.0
LLL/LLR
18
0.8g1.6
0.2 to 0.3
0.3 to 0.4
1.4 to 1.6
LLL
21
1.25g2.0
0.4 to 0.5
0.4 to 0.5
1.4 to 1.8
LLL
31
1.6g3.2
0.6 to 0.8
0.6 to 0.7
2.6 to 2.8
GR4
0.07 to 0.12
0.16 to 0.2
GJM
0.10 to 0.11
0.4g0.2
GQM
0.25g0.125
02
GA2
01
GRM/GJM
GA3
GB
GRM
GA3
GD
c
GA3
GF
b
LLL
a
LLA
Chip (LgW)
LLM
Chip Dimension Code
(L/W)
Series
GRJ
GR3
Table 2 Reflow Soldering Method
(in mm)
Chip (LgW)
a
b
c
KRM
21
2.0g1.25
1.0 to 1.2
0.6 to 0.7
0.8 to 1.1
KRM
31
3.2g1.6
2.2 to 2.4
0.8 to 0.9
1.0 to 1.4
KR3/KRM
55
5.7g5.0
2.6
2.7
5.6
(in mm)
Table 3 ZRB Series Reflow Soldering Method
Chip Dimension
Chip (LgW)
Code (L/W)
ZRB
15
1.0g0.5
0.4 to 0.6 0.4 to 0.5 0.5 to 0.7
ZRB
18*
1.6g0.8
0.7 to 0.9 0.7 to 0.8 0.8 to 1.0
[Land for ZRB Series]
c
ZRB
Land
GMA
b
c
a
KR3
Series
(in mm)
*If distance between parts is too short, there is risk to cause
electrical short. Please confirm the mounting pitch
(distance between centers of parts) has 1.275mm or more.
(ZRB18 only)
a
Solder Resist
GMD
b
Chip Dimension Code
(L/W)
Chip (LgW)
a
b
c
p
LLA
18
1.6g0.8
0.3 to 0.4
0.25 to 0.35
0.15 to 0.25
0.4
LLA
21
2.0g1.25
0.5 to 0.7
0.35 to 0.6
0.2 to 0.3
0.5
Notice
Table 4 LLA Series Reflow Soldering Method
Series
NFM
Chip Dimension Code
(L/W)
KRM
Series
LLR
(in mm)
Continued on the following page.
145
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
Notice
Continued from the preceding page.
d
e
f
p
(0.3 to 0.5)
0.3
2.0 to 2.6
1.3 to 1.8
1.4 to 1.6
0.5
(in mm)
[Land for LLM Series]
p
Chip Capacitor
e
a
c'
b
Land
b'
b
a
GJM
c
Chip Capacitor
f
d
Solder Resist
GA3
GB
Solder Resist
Slit
Solder Resist
GA3
GD
Chip Capacitor
L
d
W
e
Land
LgW
d
e
–
LLL
2-2. Dimensions of Slit (Example)
Preparing the slit helps flux cleaning and resin
coating on the back of the capacitor.
However, the length of the slit design should be as
short as possible to prevent mechanical damage in
the capacitor.
A longer slit design might receive more severe
mechanical stress from the PCB.
Recommended slit design is shown in the Table.
1.6g0.8
–
2.0g1.25
–
–
3.2g1.6
1.0 to 2.0
3.2 to 3.7
3.2g2.5
1.0 to 2.0
4.1 to 4.6
4.5g2.0
1.0 to 2.8
3.6 to 4.1
4.5g3.2
1.0 to 2.8
4.8 to 5.3
5.7g2.8
1.0 to 4.0
4.4 to 4.9
5.7g5.0
1.0 to 4.0
6.6 to 7.1
(in mm)
Please refer to the land dimensions in Table 6 and the solder
amount in Table 7 for ZRA series.
(1) Recommended Land Dimensions
Table 6 Land Dimensions
ZRA
21
2.4g1.65
a
b
c
0.8±0.05
1.0±0.05
1.4±0.05
ZRA
Land
c
Series
KRM
NFM
Chip Dimension
Chip (LgW)
Code (L/W)
GA3
GF
p
c
LLA
Land
GQM
[Land for LLA Series]
GR4
b=(c-e)/2, b'=(d-f)/2
GRJ
0.6 to 0.8
c, c'
GA2
2.0g1.25
b, b'
LLM
21
a
LLR
LLM
Chip
(LgW)
KR3
Chip Dimension Code
(L/W)
Series
GR3
Table 5 LLM Series Reflow Soldering Method
b
a
Solder Resist
ZRA
21
Thickness
a’
b’
c’
0.1
0.8±0.05
1.0±0.05
0.7±0.05
Solder Paste
Notice
Chip Dimension
Code (L/W)
c’
Series
GMD
(2) Recommended Solder Amount
Table 7 Solder Amount
GMA
(in mm)
(in mm)
b’
a’
Continued on the following page.
146
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
Notice
Land Pattern
+ Solder Resist
Solder Resist
(in mm)
NFMJMPC
NFM18CC/NFM18PC
Filled via ø0.15
NFM18PS
0.4
0.6
1.0
2.2
In case of changing the
land dimentions marked
by *, a solder bridge
between terminations
of the chip could occur.
In this case, please
contact us before change.
GQM
0.25
0.5*
0.9*
1.4
GA2
Filled via
ø0.15
1.3
NFM15CC
NFM15PC
NFMJMPC
NFM18CC
NFM18PC
NFM18PS
NFM21CC
NFM21PC
NFM21PS
0.4
0.6
1.2
1.5
0.3
Small diameter thru hole ø0.2-ø0.3
0.3
0.95
0.6
0.75
0.3
0.25
0.25
0.7
GR4
NFM15CC/NFM15PC
GJM
o Reflow Soldering
GRJ
Land Dimensions
NFM21PS
NFM21CC/NFM21PC
GA3
GB
Series
Land Pattern
GR3
Continued from the preceding page.
Small diameter thru hole ø0.2-ø0.3
Small diameter thru hole ø0.4
GA3
GD
0.4
0.6
0.85
1.25
1.85
2.35
GA3
GF
0.6
1.4
2.6
0.8
1.2
2.0
o Reflow Soldering
Chip mounting side
o Flow Soldering
LLL
0.8
1.2
1.6
1.8
2.6
LLA
0.05
2.3
0.4 0.1
1.2
1.5
0.6
0.8
1.9
Small diameter thru hole ø0.2
Chip mounting side
NFM41CC
NFM41PC 1.5 2.0 3.5 6.0 1.2 2.6 3.0
NFM31KC*1
Small diameter thru hole ø0.4
10mm or
more
(in case of
10A)
*1 For large current
design, width of
signal land pattern
should be wider not
less than 1mm per
1A (1mm/A).
For example,
in case of 10A, signal
land pattern width
should be 10mm or
more.
(1mm/A*10A=10mm)
1.0
1.4
2.5
4.4
b
c
d
e
f
g
NFM31PC 1.0 1.4 2.5 4.4 1.2 2.6 3.0
a
b
c
d
NFM41CC 1.5 2.0 3.5 6.0 1.2 2.6 3.0
NFM41PC
NFM31KC*1
Small diameter thru hole ø0.4
10mm or
more
(in case of
10A)
*1 For large current
design, width of
signal land pattern
should be wider not
less than 1mm per
1A (1mm/A).
For example,
in case of 10A, signal
land pattern width
should be 10mm or
more.
(1mm/A*10A=10mm)
1.0
1.4
2.5
4.4
Continued on the following page.
NFM
NFM31PC 1.0 1.4 2.5 4.4 1.2 2.6 3.0
a
NFM3DCC 1.0 1.4 2.5 4.4 1.0 2.0 2.4
NFM3DPC
LLR
g
KRM
f
KR3
e
GMA
d
GMD
c
Size (mm)
Notice
b
Part
Number
0.6
1.2
2.6
3.0
a
b
c
d
a
NFM3DCC 1.0 1.4 2.5 4.4 1.0 2.0 2.4
NFM3DPC
0.6
1.2
2.6
3.0
NFM3DCC
NFM3DPC
NFM31PC
NFM31KC
NFM41CC
NFM41PC
Small diameter thru hole ø0.4
Size (mm)
Part
Number
0.6
e
f
g
0.6
e
f
g
Small diameter thru hole ø0.4
LLM
NFM3DCC/NFM3DPC/NFM31PC/NFM41CC/NFM41PC
147
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
Notice
[Relationship with amount of strain to the board
thickness, length, width, etc.]
GR4
Relationship between load and strain
GQM
GA3
GB
GA3
GD
GA3
GF
LLL
LLA
strength be reduced, but solderability may also suffer
due to the effects of oxidation on the terminations
(outer electrodes) of the capacitor and the land surface
on the board.
(1) Selection of Adhesive
Epoxy resins are a typical class of adhesive.
To select the proper adhesive, consider the following
points.
1) There must be enough adhesive strength to
prevent the component from loosening or slipping
during the mounting process.
2) The adhesive strength must not decrease when
exposed to moisture during soldering.
3) The adhesive must have good coatability and
shape retention properties.
4) The adhesive must have a long pot life.
5) The curing time must be short.
6) The adhesive must not be corrosive to the exterior
of the capacitor or the board.
7) The adhesive must have good insulation properties.
8) The adhesive must not emit toxic gases or
otherwise be harmful to health.
9) The adhesive must be free of halogenated
compounds.
LLM
If you want to temporarily attach the capacitor to the board
using an adhesive agent before soldering the capacitor, first
be sure that the conditions are appropriate for affixing the
capacitor. If the dimensions of the land, the type of
adhesive, the amount of coating, the contact surface area,
the curing temperature, or other conditions are
inappropriate, the characteristics of the capacitor may
deteriorate.
1. Selection of Adhesive
1-1. Depending on the type of adhesive, there may be a
decrease in insulation resistance. In addition, there is a
chance that the capacitor might crack from contractile
stress due to the difference in the contraction rate of
the capacitor and the adhesive.
1-2. If there is not enough adhesive, the contact surface
area is too small, or the curing temperature or curing
time are inadequate, the adhesive strength will be
insufficient and the capacitor may loosen or become
disconnected during transportation or soldering.
If there is too much adhesive, for example if it overflows
onto the land, the result could be soldering defects, loss
of electrical connection, insufficient curing, or slippage
after the capacitor is mounted.
Furthermore, if the curing temperature is too high or the
curing time is too long, not only will the adhesive
LLR
2. Item to be confirmed for Flow soldering
NFM
When the load is constant, the following relationship can be established.
· As the distance between the supporting points (L) increases,
the amount of strain also increases.
→Reduce the distance between the supporting points.
· As the elastic modulus (E) decreases, the amount of strain increases.
→Increase the elastic modulus.
· As the board width (w) decreases, the amount of strain increases.
→Increase the width of the board.
· As the board thickness (h) decreases, the amount of strain increases.
→Increase the thickness of the board.
Since the board thickness is squared, the effect on the amount of strain
becomes even greater.
KRM
w
KR3
h
L
GA2
Y
GMA
P
GJM
3 : Strain on center of board (µst)
L: Distance between supporting points (mm)
w: Board width (mm)
h: Board thickness (mm)
E: Elastic modulus of board (N/m2=Pa)
Y: Deflection (mm)
P: Load (N)
GMD
3PL
2Ewh2
Notice
3=
GRJ
GR3
Continued from the preceding page.
3. Board Design
When designing the board, keep in mind that the amount
of strain which occurs will increase depending on the size
and material of the board.
Continued on the following page.
148
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
GRM
Notice
Continued from the preceding page.
GR3
(2) Use the following illustration as a guide to the
amount of adhesive to apply.
[Chip (LgW): 3.2g1.2mm/3.2g1.6mm/4.5g1.6mm]
GRJ
[Chip (LgW): 1.6g0.8mm/2.0g1.25mm/3.2g1.6mm]
Adhesive
GR4
Cross Sectional View
Resist
Land
Coating position of
bonding agent
GQM
Board
GJM
Bonding agent
GA3
GF
LLL
LLA
LLM
A
LLR
[As a Single Chip]
D
Termination (Outer Electrode)
C
[As Mounted on Substrate]
B
NFM
B
KRM
2. Flux
2-1. An excessive amount of flux generates a large
quantity of flux gas, which can cause a deterioration of
solderability,
so apply flux thinly and evenly throughout. (A foaming
system is generally used for flow soldering.)
2-2. Flux containing too high a percentage of halide may
cause corrosion of the terminations unless there is
sufficient cleaning. Use flux with a halide content of
0.1% max.
2-3. Strong acidic flux can corrode the capacitor and
degrade its performance.
Please check the quality of capacitor after mounting.
3. Leaching of the terminations
o Set temperature and time to ensure that leaching of
the terminations does not exceed 25% of the chip end
area as a single chip (full length of the edge A-B-C-D
shown at right) and 25% of the length A-B shown as
mounted on substrate.
GA3
GD
GA3
GB
GA2
Side View
GMA
KR3
A
3. Reflow Soldering
Continued on the following page.
Notice
GMD
The flux in the solder paste contains halogen-based
substances and organic acids as activators.
Strong acidic flux can corrode the capacitor and degrade
its performance.
Please check the quality after mounting, please use.
149
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Mar.13,2020
GRM
Notice
GRJ
2. Unsuitable cleaning may leave residual flux or other
foreign substances, causing deterioration of electrical
characteristics and the reliability and water repellency* of
the capacitors.
*GXM only
4. The effects of noise suppression can vary depending on
the usage conditions, including differences in the circuit
or IC to be used, the type of noise, the shape of the
pattern to be mounted, and the mounting location. Be
sure to verify the effect on the actual device in advance.
GQM
GA2
GA3
GB
LLM
LLR
NFM
KRM
1. Evaluate the capacitor in the actual system, to confirm
that there is no problem with the performance and
specification values in a finished product before using.
2. Since a voltage dependency and temperature
dependency exists in the capacitance of high dielectric
type ceramic capacitors, the capacitance may change
depending on the operating conditions in the actual
system. Therefore, be sure to evaluate the various
characteristics, such as the leakage current and noise
absorptivity, which will affect the capacitance value of
the capacitor.
3. In addition, voltages exceeding the predetermined surge
may be applied to the capacitor by the inductance in the
actual system. Evaluate the surge resistance in the actual
system as required.
KR3
2. Characteristics Evaluation in the Actual System
1. The performance of a capacitor may be affected by the
conditions during transportation.
1-1. The capacitors shall be protected against excessive
temperature, humidity, and mechanical force during
transportation.
(1) Climatic condition
• low air temperature: -40°C
• change of temperature air/air: -25°C/+25°C
• low air pressure: 30 kPa
• change of air pressure: 6 kPa/min.
(2) Mechanical condition
Transportation shall be done in such a way that
the boxes are not deformed and forces are not
directly passed on to the inner packaging.
1-2. Do not apply excessive vibration, shock, or pressure
to the capacitor.
(1) When excessive mechanical shock or pressure is
applied to a capacitor, chipping or cracking may
occur in the ceramic body of the capacitor.
(2) When the sharp edge of an air driver, a soldering
iron, tweezers, a chassis, etc. impacts strongly on
the surface of the capacitor, the capacitor may
crack and short-circuit.
1-3. Do not use a capacitor to which excessive shock was
applied by dropping, etc.
A capacitor dropped accidentally during processing
may be damaged.
GMA
1. Transportation
GMD
Other
LLA
LLL
4. Loss suppress acoustic noise may be caused in ZRA/ZRB
series due to the resin during curing process. Please
contact our sales representative or product engineers on
the apply to resin during curing process.
GA3
GD
2. Select a resin that is less hygroscopic.
Using hygroscopic resins under high humidity conditions
may cause the deterioration of the insulation resistance
of a capacitor.
An epoxy resin can be used as a less hygroscopic resin.
3. The halogen system substance and organic acid are
included in coating material, and a chip corrodes by the
kind of Coating material.
Do not use strong acid type.
Notice
1. A crack may be caused in the capacitor due to the stress
of the thermal contraction of the resin during curing
process.
The stress is affected by the amount of resin and curing
contraction.
Select a resin with low curing contraction.
The difference in the thermal expansion coefficient
between a coating resin or a molding resin and the
capacitor may cause the destruction and deterioration of
the capacitor such as a crack or peeling, and lead to the
deterioration of insulation resistance or dielectric
breakdown.
Select a resin for which the thermal expansion coefficient
is as close to that of the capacitor as possible.
A silicone resin can be used as an under-coating to buffer
against the stress.
GA3
GF
5. Coating
GJM
GR4
1. Please evaluate the capacitor using actual cleaning
equipment and conditions to confirm the quality, and
select the solvent for cleaning.
GR3
Continued from the preceding page.
4. Washing
150
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
"SimSurfing"
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Design Support Tool
C02E.pdf
Mar.13,2020
https://www.murata.com/simsurfing/
This is the latest tool to get the electrical characteristics for Capacitors, Inductors,
and EMI Suppression Filters, and to simulate Thermistors' behavior !
cCharacteristics viewer
You can easily search and download the following data for
Multilayer Ceramic Capacitors, Polymer Capacitors, EMI
Suppression Filters (Three-terminal Capacitors, Ferrite
Beads) and Power/RF Inductors.
cComponents performance simulator
You can search by the simulation on simple circuits for
Thermistors.
cSelection tool
You can select Medium voltage Capacitors and Power
Inductors according to conditions of use.
* Medium voltage: Rated Voltage 250V and over
cSearch tool
You can search the Murata timing device (CERALOCKr
and crystal units) that is most suitable for your IC and
access information about the recommended circuit
constant setting.
If you register as a "my Murata" user
(https://my.murata.com/en/web/mymurata/), you can use
Enhanced SimSurfing.
c Usage example of "Multilayer Ceramic Capacitors"
1 (1) By performance/type
1 Select the products
Select characteristics parameter or
1
(1) By performance/type
(2) By part number
capacitor type.
1
1
1 (2) By part number
2 Show graph
Input the part number in the text box
Click each button on each tab of [Basic],
[S-parameter] and [Detailed].
2
3
3 Data download
• Click each purple button in this area.
• Click "CSV output" button.
3
3
* Images are as of October 2015. Be assured that this software will be updated frequently.
https://www.murata.com/simsurfing/
151
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
Web page Introduction
Search by Part Number
https://www.murata.com/search/productsearch?cate=cgsubCeramicCapacitors
You can search for capacitors by specifying the
alphanumeric characters in the part number.
The packing codes shown contain the substitute
character "#". If you enter the official packing
code, part numbers that contain that packing
code will be matched.
Search by Specifications
https://www.murata.com/search/productsearch?cate=luCeramicCapacitorsSMD#spec
You can search for SMD, lead type, or screw
termination type capacitors by indicating
specifications such as application, capacitance,
rated voltage, or temperature characteristics.
You can narrow your search by entering values
of ranges, and by specifying product
characteristics.
The items for narrowing searches are linked, so
specifying one condition causes selectable
options for the other items to allow input only of
conditions that match the relevant part
numbers.
152
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Mar.13,2020
Search in the Lineups
https://www.murata.com/products/capacitor/mlcc/lineup
You can search for capacitors by
specifying the series lineup.
You can also confirm items such as
characteristics and applications on each
series page.
Capacitance chart in Series page.
[Search result]
Compares the characteristics of the checked
part numbers.
Displays the number of hits for the
current search conditions in real time.
Click the mark for each item to
switch between ascending and
descending display.
Click a product name to display a
details page listing more in-depth
information (→ P36).
You can download detailed spec
sheets.
For some products it is possible to
request a free sample.
Icons enable you to check the status
and characteristics of products at a
glance.
You narrow the search results to match
the selected condition in real time.
You can confirm the current conditions
for narrowing the search results.
153
C02E.pdf
Mar.13,2020
Cat. No. C02E-22
Global Locations
For details please visit www.murata.com
Note
1 Export Control
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law”
of Japan, the export license specified by the law
is required for export.
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
1
Aircraft equipment
2
Aerospace equipment
3
Undersea equipment
4
Power plant equipment
5
Medical equipment
6
Transportation equipment (vehicles, trains,
ships, etc.)
7
Traffic signal equipment
8
Disaster prevention / crime prevention
equipment
9
Data-processing equipment
10
Application of similar complexity and/or
reliability requirements to the applications
listed above
Murata Manufacturing Co., Ltd.
www.murata.com
3 Product specifications in this catalog are as of
January 2020. They are subject to change or
our products in it may be discontinued without
advance notice. Please check with our sales
representatives or product engineers before
ordering. If there are any questions, please contact
our sales representatives or product engineers.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
5 This catalog has only typical specifications.
Therefore, please approve our product
specifications or transact the approval sheet
for product specifications before ordering.
6 Please note that unless otherwise specified, we
shall assume no responsibility whatsoever for any
conflict or dispute that may occur in connection
with the effect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the effect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Murata:
GR731CR72E153KW03L GR731CR72E223KW03L GJM-KIT-B GR732DR72E473KW01L GJM15-KIT-TTOL---E
GR355XD72J274KW05L GJM03-KIT-TTOL---E GJM15-KIT-DE-1 GJM03-KIT-DE-2 GJM03-KIT-DE-1 GJM15-KITDE-2 GCM-KIT-C0G-DE MKV250V-KIT-2-DE GCM-KIT-X7-DE DHR-KIT-DE MKV250V-KIT-3-DE MKV250V-KIT-4DE MKV250V-KIT-1-DE