GRM31M5C1H473JA01D

C02E10.pdf 04.1.20 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors 1 for Flow/Reflow Soldering GRM15/18/21/31 Series e g e ■ Features T 1. Terminations are made of metal highly resistant to migration. 2. The GRM series is a complete line of chip ceramic capacitors in 6.3V, 10V, 16V, 25V, 50V, 100V, 200V and 500V ratings. These capacitors have temperature characteristics ranging from C0G to Y5V. 3. A wide selection of sizes is available, from the miniature LxWxT: 1.0x0.5x0.5mm to LxWxT: 3.2x1.6x1.15mm. GRM18, 21 and GRM31 types are suited to flow and reflow soldering. GRM15 type is applied to only reflow soldering. 4. Stringent dimensional tolerances allow highly reliable, high speed automatic chip placement on PCBs. 5. The GRM series is available in paper or plastic embossed tape and reel packaging for automatic placement. Bulk case packaging is also available for GRM15, GRM18 and GRM21. L Part Number GRM155 GRM188* GRM216 GRM219 GRM21A GRM21B GRM316 GRM319 GRM31M GRM31C W Dimensions (mm) L W T e 1.0 ±0.05 0.5 ±0.05 0.5 ±0.05 0.15 to 0.3 1.6 ±0.1 0.8 ±0.1 0.8 ±0.1 0.2 to 0.5 0.6 ±0.1 0.85 ±0.1 2.0 ±0.1 1.25 ±0.1 0.2 to 0.7 1.0 +0/-0.2 1.25 ±0.1 0.6 ±0.1 3.2 ±0.15 1.6 ±0.15 0.85 ±0.1 0.3 to 0.8 1.15 ±0.1 3.2 ±0.2 1.6 ±0.2 1.6 ±0.2 g min. 0.4 0.5 0.7 1.5 * Bulk Case : 1.6 ±0.07(L)g0.8 ±0.07(W)g0.8 ±0.07(T) ■ Applications General electronic equipment Temperature Compensating Type GRM15 Series (1.0x0.5 mm) 50V/25V GRM15 Part Number 1.00x0.50 [0402] L x W [EIA] TC C0G (5C) P2H (6P) R2H (6R) S2H (6S) Rated Volt. 50 (1H) 50 (1H) 50 (1H) 50 (1H) SL (1X) 50 (1H) 25 (1E) T2H (6T) U2J (7U) 50 (1H) 50 (1H) Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 0.50pF(R50) 0.50(5) 0.75pF(R75) 0.50(5) 1.0pF(1R0) 0.50(5) 2.0pF(2R0) 0.50(5) 3.0pF(3R0) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 4.0pF(4R0) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 5.0pF(5R0) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 6.0pF(6R0) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 7.0pF(7R0) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 8.0pF(8R0) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 9.0pF(9R0) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 10pF(100) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 12pF(120) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 15pF(150) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 18pF(180) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 22pF(220) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 27pF(270) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 33pF(330) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) Continued on the following page. 7 C02E10.pdf 04.1.20 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. 1 GRM15 Part Number 1.00x0.50 [0402] L x W [EIA] TC C0G (5C) P2H (6P) R2H (6R) S2H (6S) Rated Volt. 50 (1H) 50 (1H) 50 (1H) 50 (1H) SL (1X) 50 (1H) 25 (1E) T2H (6T) U2J (7U) 50 (1H) 50 (1H) Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 39pF(390) 0.50(5) 0.50(5) 0.50(5) 47pF(470) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 56pF(560) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 68pF(680) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 82pF(820) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 100pF(101) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 120pF(121) 0.50(5) 0.50(5) 0.50(5) 150pF(151) 0.50(5) 0.50(5) 0.50(5) 180pF(181) 0.50(5) 0.50(5) 220pF(221) 0.50(5) 0.50(5) 270pF(271) 0.50(5) 0.50(5) 330pF(331) 0.50(5) 0.50(5) 390pF(391) 0.50(5) 0.50(5) 470pF(471) 0.50(5) 560pF(561) 0.50(5) 680pF(681) 0.50(5) 820pF(821) 0.50(5) 1000pF(102) 0.50(5) 0.50(5) The part numbering code is shown in ( ). Dimensions are shown in mm and Rated Voltage in Vdc. Temperature Compensating Type GRM18 Series (1.60x0.80 mm) 200V/100V/50V/25V GRM18 Part Number 1.60x0.80 [0603] L x W [EIA] C0G (5C) TC Rated Volt. 200 (2D) 100 (2A) 50 (1H) P2H (6P) R2H (6R) S2H (6S) 50 (1H) 50 (1H) 50 (1H) SL (1X) 200 (2D) 100 (2A) 50 (1H) 25 (1E) T2H (6T) U2J (7U) 50 (1H) 50 (1H) Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 0.50pF(R50) 0.80(8) 0.80(8) 0.80(8) 0.75pF(R75) 0.80(8) 0.80(8) 0.80(8) 1.0pF(1R0) 0.80(8) 0.80(8) 0.80(8) 2.0pF(2R0) 0.80(8) 0.80(8) 0.80(8) 3.0pF(3R0) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 4.0pF(4R0) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 5.0pF(5R0) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 6.0pF(6R0) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 7.0pF(7R0) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 8.0pF(8R0) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 9.0pF(9R0) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 10pF(100) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 12pF(120) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 15pF(150) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 18pF(180) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 22pF(220) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 27pF(270) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 33pF(330) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 39pF(390) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 47pF(470) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 56pF(560) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) Continued on the following page. 8 C02E10.pdf 04.1.20 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. GRM18 Part Number C0G (5C) TC Rated Volt. 1 1.60x0.80 [0603] L x W [EIA] 200 (2D) 100 (2A) 50 (1H) P2H (6P) R2H (6R) S2H (6S) 50 (1H) 50 (1H) 50 (1H) SL (1X) 200 (2D) 100 (2A) 50 (1H) 25 (1E) T2H (6T) U2J (7U) 50 (1H) 50 (1H) Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 68pF(680) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 82pF(820) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 100pF(101) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 120pF(121) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 150pF(151) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 180pF(181) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 220pF(221) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 270pF(271) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 330pF(331) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 390pF(391) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 470pF(471) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 560pF(561) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 680pF(681) 0.80(8) 0.80(8) 820pF(821) 0.80(8) 0.80(8) 1000pF(102) 0.80(8) 0.80(8) 1200pF(122) 0.80(8) 0.80(8) 1500pF(152) 0.80(8) 0.80(8) 1800pF(182) 0.80(8) 2200pF(222) 0.80(8) 2700pF(272) 0.80(8) 0.80(8) The part numbering code is shown in ( ). Dimensions are shown in mm and Rated Voltage in Vdc. Temperature Compensating Type GRM21 Series (2.00x1.25 mm) 200V/100V/50V/25V GRM21 Part Number 2.00x1.25 [0805] L x W [EIA] C0G (5C) TC Rated Volt. 200 (2D) 100 (2A) 50 (1H) C0H (6C) P2H (6P) R2H (6R) S2H (6S) 25 (1E) 50 (1H) 50 (1H) 50 (1H) SL (1X) 200 (2D) 100 (2A) 50 (1H) 25 (1E) T2H (6T) U2J (7U) 50 (1H) 50 (1H) Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 12pF(120) 0.85(9) 15pF(150) 0.85(9) 18pF(180) 0.85(9) 22pF(220) 0.85(9) 27pF(270) 0.85(9) 33pF(330) 0.85(9) 39pF(390) 0.85(9) 47pF(470) 0.85(9) 56pF(560) 0.85(9) 68pF(680) 1.25(B) 0.85(9) 82pF(820) 1.25(B) 0.85(9) 100pF(101) 1.25(B) 0.60(6) 120pF(121) 1.25(B) 0.60(6) 150pF(151) 1.25(B) 0.60(6) 180pF(181) 1.25(B) 0.60(6) 0.85(9) 220pF(221) 1.25(B) 0.60(6) 0.85(9) 0.85(9) 270pF(271) 0.60(6) 0.85(9) 0.85(9) 0.85(9) 1.25(B) 330pF(331) 0.60(6) 0.85(9) 0.85(9) 0.85(9) 1.25(B) 390pF(391) 0.60(6) 1.25(B) 0.85(9) 0.85(9) 1.25(B) 0.85(9) 1.25(B) 1.25(B) 1.25(B) Continued on the following page. 9 C02E10.pdf 04.1.20 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. 1 GRM21 Part Number 2.00x1.25 [0805] L x W [EIA] C0G (5C) TC Rated Volt. 200 (2D) 100 (2A) 50 (1H) C0H (6C) P2H (6P) R2H (6R) S2H (6S) 25 (1E) 50 (1H) 50 (1H) 50 (1H) SL (1X) 200 (2D) 100 (2A) 50 (1H) 25 (1E) T2H (6T) U2J (7U) 50 (1H) 50 (1H) Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 470pF(471) 0.60(6) 1.25(B) 0.85(9) 0.85(9) 560pF(561) 0.60(6) 1.25(B) 1.25(B) 1.25(B) 1.25(B) 0.85(9) 0.85(9) 680pF(681) 0.85(9) 1.25(B) 1.25(B) 0.85(9) 820pF(821) 0.85(9) 1.25(B) 1.25(B) 0.60(6) 1.25(B) 0.60(6) 1000pF(102) 0.85(9) 1.25(B) 1.25(B) 1.25(B) 0.60(6) 1.25(B) 0.60(6) 1200pF(122) 1.25(B) 0.60(6) 1.25(B) 0.60(6) 1500pF(152) 1.25(B) 0.85(9) 1.25(B) 0.85(9) 1.25(B) 0.85(9) 1.25(B) 0.85(9) 1800pF(182) 0.60(6) 2200pF(222) 0.60(6) 2700pF(272) 0.60(6) 3300pF(332) 3900pF(392) 4700pF(472) 0.60(6) 0.85(9) 5600pF(562) 0.85(9) 1.25(B) 6800pF(682) 0.85(9) 1.25(B) 8200pF(822) 0.85(9) 10000pF(103) 0.85(9) 0.85(9) 0.85(9) 1.25(B) 1.25(B) 1.25(B) 0.60(6) 1.25(B) 1.25(B) 0.60(6) 1.25(B) 1.25(B) 0.85(9) 0.60(6) 0.60(6) 12000pF(123) 0.60(6) 0.60(6) 15000pF(153) 0.60(6) 0.60(6) 18000pF(183) 0.60(6) 0.60(6) 22000pF(223) 0.85(9) 0.85(9) 27000pF(273) 0.85(9) 0.85(9) 33000pF(333) 1.00(A) 1.00(A) 39000pF(393) 1.25(B) 1.25(B) 47000pF(473) 1.25(B) 1.25(B) The part numbering code is shown in ( ). Dimensions are shown in mm and Rated Voltage in Vdc. Temperature Compensating Type GRM31 Series (3.20x1.60 mm) 500V/200V/100V/50V/25V GRM31 Part Number 3.20x1.60 [1206] L x W [EIA] C0G (5C) TC Rated Volt. 500 (2H) 200 (2D) 50 (1H) 25 (1E) C0H (6C) P2H (6P) R2H (6R) S2H (6S) 25 (1E) 50 (1H) 50 (1H) 50 (1H) SL (1X) 200 (2D) 100 (2A) 50 (1H) 25 (1E) T2H (6T) U2J (7U) 50 (1H) 50 (1H) Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 1.0pF(1R0) 1.15(M) 2.0pF(2R0) 1.15(M) 3.0pF(3R0) 1.15(M) 4.0pF(4R0) 1.15(M) 5.0pF(5R0) 1.15(M) 6.0pF(6R0) 1.15(M) 7.0pF(7R0) 1.15(M) 8.0pF(8R0) 1.15(M) 9.0pF(9R0) 1.15(M) 10pF(100) 1.15(M) 12pF(120) 1.15(M) 15pF(150) 1.15(M) 18pF(180) 1.15(M) 22pF(220) 1.15(M) Continued on the following page. 10 C02E10.pdf 04.1.20 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. GRM31 Part Number C0G (5C) TC Rated Volt. 1 3.20x1.60 [1206] L x W [EIA] 500 (2H) 200 (2D) 50 (1H) 25 (1E) C0H (6C) P2H (6P) R2H (6R) S2H (6S) 25 (1E) 50 (1H) 50 (1H) 50 (1H) SL (1X) 200 (2D) 100 (2A) 50 (1H) 25 (1E) T2H (6T) U2J (7U) 50 (1H) 50 (1H) Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 27pF(270) 1.15(M) 33pF(330) 1.15(M) 39pF(390) 1.15(M) 47pF(470) 1.15(M) 56pF(560) 1.15(M) 68pF(680) 1.15(M) 82pF(820) 1.15(M) 270pF(271) 1.15(M) 330pF(331) 1.15(M) 390pF(391) 1.15(M) 470pF(471) 1.15(M) 560pF(561) 1.15(M) 680pF(681) 0.85(9) 820pF(821) 0.85(9) 1.15(M) 0.85(9) 1.15(M) 1000pF(102) 1.15(M) 1.15(M) 0.85(9) 1.15(M) 1200pF(122) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1500pF(152) 1.15(M) 1.15(M) 1.15(M) 1800pF(182) 1.15(M) 2200pF(222) 1.15(M) 1.15(M) 2700pF(272) 1.15(M) 1.15(M) 3300pF(332) 1.15(M) 3900pF(392) 1.15(M) 0.85(9) 4700pF(472) 1.15(M) 0.85(9) 5600pF(562) 0.85(9) 6800pF(682) 0.85(9) 8200pF(822) 0.85(9) 10000pF(103) 0.85(9) 1.15(M) 1.15(M) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 12000pF(123) 1.15(M) 15000pF(153) 1.15(M) 27000pF(273) 0.85(9) 33000pF(333) 0.85(9) 47000pF(473) 1.15(M) 56000pF(563) 0.85(9) 0.85(9) 68000pF(683) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 82000pF(823) 0.10µF(104) 1.60(C) The part numbering code is shown in ( ). Dimensions are shown in mm and Rated Voltage in Vdc. High Dielectric Constant Type X5R (R6) Characteristics X5R (R6) TC GRM15 GRM18 GRM21 GRM31 1.00x0.50 [0402] 1.60x0.80 [0603] 2.00x1.25 [0805] 3.20x1.60 [1206] Part Number L x W [EIA] Rated Volt. 16 (1C) 10 (1A) 10 (1A) 6.3 (0J) 10 (1A) 6.3 (0J) 10 (1A) 6.3 (0J) Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 68000pF(683) 0.10µF(104) 0.33µF(334) 0.50(5) 0.50(5) 0.50(5) 0.80(8) Continued on the following page. 11 C02E10.pdf 04.1.20 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. 1 X5R (R6) TC GRM15 GRM18 GRM21 GRM31 1.00x0.50 [0402] 1.60x0.80 [0603] 2.00x1.25 [0805] 3.20x1.60 [1206] Part Number L x W [EIA] 16 (1C) Rated Volt. 10 (1A) 10 (1A) 6.3 (0J) 10 (1A) 6.3 (0J) 10 (1A) 6.3 (0J) Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 0.47µF(474) 0.80(8) 0.68µF(684) 0.80(8) 1.0µF(105) 0.80(8) 0.80(8) 0.85(9) 1.5µF(155) 0.85(9) 2.2µF(225) 1.25(B) 0.85(9) 3.3µF(335) 1.25(B) 1.25(B) 1.30(X) 4.7µF(475) 1.25(B) 1.60(C) 1.15(M) 1.60(C) 1.60(C) 10µF(106) The part numbering code is shown in each ( ). 3.3µF and 4.7µF, 6.3V rated are GRM21 series of L: 2±0.15, W: 1.25±0.15, T: 1.25±0.15. T: 1.15±0.1mm is also available for GRM31 1.0µF for 16V. L: 3.2±0.2, W: 1.6±0.2 for GRM31 16V 1.0µF type. Also L: 3.2±0.2, W: 1.6±0.2, T: 1.15±0.15 for GRM31 16V 1.5µF and 2.2µF type. Dimensions are shown in mm and Rated Voltage in Vdc. High Dielectric Constant Type X7R (R7) Characteristics X7R (R7) TC Part Number L x W [EIA] Rated Volt. 50 (1H) GRM15 GRM18 GRM21 GRM31 1.00x0.50 [0402] 1.60x0.80 [0603] 2.00x1.25 [0805] 3.20x1.60 [1206] 25 (1E) 16 (1C) 10 (1A) 100 (2A) 50 (1H) 25 (1E) 16 (1C) 10 (1A) 100 (2A) 50 (1H) 25 (1E) 16 (1C) 100 (2A) 50 (1H) 25 (1E) 16 (1C) 10 (1A) Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 220pF (221) 0.50 (5) 0.80 (8) 330pF (331) 0.50 (5) 0.80 (8) 470pF (471) 0.50 (5) 0.80 (8) 680pF (681) 0.50 (5) 0.80 (8) 1000pF (102) 0.50 (5) 0.80 (8) 1500pF (152) 0.50 (5) 0.80 (8) 2200pF (222) 0.50 (5) 0.80 (8) 0.80 (8) 3300pF (332) 0.50 (5) 0.80 (8) 0.80 (8) 4700pF (472) 0.50 (5) 0.80 (8) 0.85 (9) 6800pF (682) 0.50 (5) 0.80 (8) 0.85 (9) 10000pF (103) 0.50 (5) 0.80 (8) 1.25 (B) 15000pF (153) 0.50 (5) 0.80 (8) 22000pF (223) 0.50 (5) 0.80 (8) 33000pF (333) 0.50 (5) 0.80 (8) 0.80 (8) 0.85 (9) 1.15 (M) Continued on the following page. 12 C02E10.pdf 04.1.20 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. X7R (R7) TC GRM15 GRM18 GRM21 GRM31 1.00x0.50 [0402] 1.60x0.80 [0603] 2.00x1.25 [0805] 3.20x1.60 [1206] Part Number L x W [EIA] Rated Volt. 1 50 (1H) 25 (1E) 16 (1C) 10 (1A) 100 (2A) 50 (1H) 25 (1E) 16 (1C) 10 (1A) 100 (2A) 50 (1H) 25 (1E) 16 (1C) 100 (2A) 50 (1H) 25 (1E) 16 (1C) 10 (1A) 0.85 (9) 0.85 (9) Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 47000pF (473) 0.50 (5) 68000pF (683) 0.10µF (104) 0.50 (5) 0.50 (5) 0.80 (8) 0.80 (8) 1.25 (B) 0.80 (8) 0.80 (8) 1.25 (B) 0.80 (8) 0.80 (8) 1.25 (B) 1.25 (B) 0.80 (8) 1.25 (B) 1.25 (B) 0.80 (8) 1.25 (B) 0.85 (9) 0.33µF (334) 0.85 (9) 1.25 (B) 0.47µF (474) 1.25 (B) 1.25 (B) 0.15µF (154) 0.80 (8) 1.15 (M) 0.80 (8) 0.22µF (224) 0.80 (8) 0.85 (9) 0.85 (9) 0.68µF (684) 0.85 (9) 1.0µF (105) 1.25 (B) 1.15 (M) 0.85 (9) 1.15 (M) 1.15 (M) 1.5µF (155) 1.60 (C) 1.15 (M) 2.2µF (225) 1.60 (C) 1.15 (M) 3.3µF (335) 1.60 (C) 4.7µF (475) 1.60 (C) 0.85 (9) The part numbering code is shown in each ( ). The tolerance will be changed to L: 3.2±0.2, W: 1.6±0.2 for GRM31 16V 1.0µF type. Also L: 3.2±0.2, W: 1.6±0.2, T: 1.15±0.15 for GRM31 16V 1.5µF and 2.2µF type. Dimensions are shown in mm and Rated Voltage in Vdc. High Dielectric Constant Type Y5V (F5) Characteristics Y5V (F5) TC GRM15 Part Number L x W [EIA] Rated Volt. GRM18 1.00x0.50 [0402] 50 (1H) 25 (1E) 16 (1C) GRM21 1.60x0.80 [0603] 100 (2A) 50 (1H) 25 (1E) 16 (1C) GRM31 2.00x1.25 [0805] 10 (1A) 50 (1H) 25 (1E) 16 (1C) 3.20x1.60 [1206] 10 (1A) 50 (1H) 25 (1E) 16 (1C) 10 (1A) 6.3 (0J) Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 2200pF (222) 0.50 (5) 4700pF (472) 0.50 (5) 10000pF (103) 0.50 (5) 22000pF (223) 0.80 (8) 0.80 (8) 0.50 (5) 47000pF (473) 0.10µF (104) 0.50 (5) 0.80 (8) 0.50 (5) 0.80 (8) 0.50 (5) 0.80 (8) 0.80 (8) 0.85 (9) Continued on the following page. 13 C02E10.pdf 04.1.20 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. 1 Y5V (F5) TC GRM15 GRM18 GRM21 GRM31 1.00x0.50 [0402] 1.60x0.80 [0603] 2.00x1.25 [0805] 3.20x1.60 [1206] Part Number L x W [EIA] Rated Volt. 50 (1H) 25 (1E) 16 (1C) 100 (2A) 50 (1H) 25 (1E) 16 (1C) 10 (1A) 50 (1H) 25 (1E) 16 (1C) 10 (1A) 50 (1H) 25 (1E) 16 (1C) 1.15 (M) 0.85 (9) 10 (1A) 6.3 (0J) Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 0.22µF (224) 0.80 (8) 1.25 (B) 0.47µF (474) 0.80 (8) 0.80 (8) 1.25 (B) 1.0µF (105) 0.80 (8) 0.80 (8) 0.85 (9) 0.85 (9) 0.85 (9) 1.25 (B) 1.25 (B) 1.25 (B) 2.2µF (225) 0.85 (9) 4.7µF (475) 1.15 (M) 1.25 (B) 10µF (106) 1.15 (M) 1.15 (M) 0.85 (9) 1.15 (M) 1.15 (M) 1.60 (C) 1.15 (M) The part numbering code is shown in each ( ). T: 1.25±0.1mm is also available for GRM21 25V or 16V 1.0µF type. Dimensions are shown in mm and Rated Voltage in Vdc. High Dielectric Constant Type Z5U (E4) Characteristics Z5U (E4) TC GRM18 GRM21 GRM31 L x W [EIA] 1.60x0.80 [0603] 2.00x1.25 [0805] 3.20x1.60 [1206] Rated Volt. 50 (1H) 50 (1H) 50 (1H) Part Number Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 10000pF(103) 0.80(8) 22000pF(223) 0.80(8) 47000pF(473) 0.60(6) 0.10µF(104) 0.85(9) 0.22µF(224) The part numbering code is shown in ( ). Dimensions are shown in mm and Rated Voltage in Vdc. 14 0.85(9) 1.15 (M) C02E10.pdf 04.1.20 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. GRM Series Specifications and Test Methods Specifications No. 1 Item Operating Temperature Temperature Compensating Type Y55 to W125D 4 Test Method High Dielectric Type R6 : Y55 to W85D R7 : Y55 to W125D E4 : W10 to W85D F5 : Y30 to W85D The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. See the previous page. 2 Rated Voltage 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimensions Using calipers on micrometer 5 Dielectric Strength No defects or abnormalities No failure should be observed when *300% of the rated voltage (C0∆ to U2J and SL) or *250% of the rated voltage (X5R, X7R, Z5U and Y5V) is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. *200% for 500V 6 Insulation Resistance More than 10,000MΩ or 500Ω • F (Whichever is smaller) The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at 25D and 75%RH max. and within 2 minutes of charging. 7 Capacitance Within the specified tolerance 8 Q/ Dissipation Factor (D.F.) 30pFmin. : Q U1000 30pFmax. : Q U400+20C C : Nominal Capacitance (pF) The capacitance/Q/D.F. should be measured at 25D at the frequency and voltage shown in the table. [R6, R7] W.V. : 25Vmin. : 0.025max. W.V. : 16/10V : 0.035max. W.V. : 6.3V 0.05max.(CF3.3µF) 0.1max.(CU3.3µF) [E4] W.V. : 25Vmin. : 0.025max. [F5] W.V. : 25Vmin. : 0.05max.(CF0.10µF) : 0.09max.(CU0.10µF) W.V. : 16V/10V : 0.125max. W.V. : 6.3Vmax. : 0.15max. 9 Capacitance Temperature Characteristics Capacitance Change Within the specified tolerance (Table A) Temperature Coefficient Within the specified tolerance (Table A) Capacitance Drift Within T0.2% or T0.05pF (Whichever is larger.) *Does not apply to 1X/25V R6 : WithinT15% (Y55 to W85D) R7 : Within±15% (Y55 to W125D) E4 : Within W22/Y56% (W10 to W85D) F5 : Within W22/Y82% (Y30 to W85D) Char. Item ∆C to 7U, 1X (1000pF and below) Frequency Voltage 1T0.1MHz 0.5 to 5Vrms ∆C to 7U, 1X (more than 1000pF) 1T0.1kHz 1T0.2Vrms R6, R7, F5 (10µF and below) 1T0.1kHz 1T0.2Vrms R6, R7, F5 (more than 10µF) 120T24Hz 0.5T0.1Vrms E4 1T0.1kHz 0.5T0.05Vrms The capacitance change should be measured after 5 min. at each specified temperature stage. (1) Temperature Compensating Type The temperature coefficient is determined using the Capacitance measured in step 3 as a reference. When cycling the temperature sequentially from step 1 through 5 (C0∆ : W25D to W125D : other temp. coeffs. : W25D to W85D) the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as Table A. The capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in steps 1, 3 and 5 by the capacitance value in step 3. Step 1 Temperature(D) 25T2 2 Y55T3 (for ∆C to 7U/1X/R6/R7) Y30T3 (for F5) 10T3 (for E4) 3 25T2 4 125T3 (for ∆C/R7) 85T3 (for other TC) 5 25T2 (2) High Dielectric Constant Type The ranges of capacitance change compared with the above 25D value over the temperature ranges shown in the table should be within the specified ranges. Continued on the following page. 22 C02E10.pdf 04.1.20 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. GRM Series Specifications and Test Methods Continued from the preceding page. Specifications No. Item Test Method Temperature Compensating Type High Dielectric Type Solder the capacitor to the test jig (glass epoxy board) shown in Fig. 1 using a eutectic solder. Then apply 10N* force in parallel with the test jig for 10T1sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *2N (GRp03) 5N (GRp15, GRM18) 10 Adhesive Strength of Termination a b c Solder resist No removal of the terminations or other defect should occur. Baked electrode or copper foil Type GRp03 GRp15 GRM18 GRM21 GRM31 GRM32 GRM43 GRM55 a 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5 b 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0 c 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6 (in mm) Fig. 1 11 Appearance No defects or abnormalities Capacitance Within the specified tolerance Vibration Resistance Q/D.F. [R6, R7] W.V. : 25Vmin. : 0.025max. W.V. : 16/10V : 0.035max. W.V. : 6.3V : 0.05max. (CF3.3µF) 0.1max. (C U3.3µF) 30pFmin. : QU1000 30pFmax. : QU400W20C C : Nominal Capacitance (pF) [E4] W.V. : 25Vmin. : 0.025max. [F5] W.V. : 25Vmin. : 0.05max. (CF0.10µF) : 0.09max. (C U0.10µF) W.V. : 16V/10V : 0.125max. W.V. : 6.3Vmax. : 0.15max. Solder the capacitor on the test jig (glass epoxy board) shown in Fig. 2 using a eutectic solder. Then apply a force in the direction shown in Fig. 3. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. No crack or marked defect should occur. φ4.5 40
QRST¢£¤¥,,
QR¢£S¤T¥ S¤T¥ b Solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). c 20 a 12 100 Deflection 50 Pressurizing speed : 1.0mm/sec. Pressurize R230 t : 1.6mm (GRp03/15 : 0.8mm) Type GRp03 GRp15 GRM18 GRM21 GRM31 GRM32 GRM43 GRM55 a 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5 b 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0 c 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6 Flexure : V1 Capacitance meter 45 45 Fig. 3 (in mm) Fig. 2 Continued on the following page. 23 4 C02E10.pdf 04.1.20 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. GRM Series Specifications and Test Methods Continued from the preceding page. Specifications No. 13 Item Solderability of Termination Temperature Compensating Type Test Method High Dielectric Type 75% of the terminations are to be soldered evenly and continuously. 4 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120D for 10 to 30 seconds. After preheating, immerse in eutectic solder solution for 2T0.5 seconds at 230T5D. The measured and observed characteristics should satisfy the specifications in the following table. 14 Appearance No marking defects Capacitance Change Within T2.5% or T0.25pF (Whichever is larger) Resistance to Soldering Q/D.F. Heat 30pFmin. : Q U1000 30pFmax. : Q U400W20C C : Nominal Capacitance (pF) R6, R7 : Within T7.5% E4, F5 : Within T20% [R6, R7] W.V. : 25Vmin. : 0.025max. W.V. : 16/10V : 0.035max. W.V. : 6.3V : 0.05max. (CF3.3µF) 0.1max. (C U3.3µF) [E4] W.V. : 25Vmin. : 0.025max. [F5] W.V. : 25Vmin. : 0.05max. (CF0.10µF) : 0.09max. (C U0.10µF) W.V. : 16V/10V : 0.125max. W.V. : 6.3Vmax. : 0.15max. I.R. More than 10,000MΩ or 500Ω • F (Whichever is smaller) Dielectric Strength No failure Preheat the capacitor at 120 to 150D for 1 minute. Immerse the capacitor in a eutectic solder solution at 270T5D for 10T0.5 seconds. Let sit at room temperature for 24T2 hours (temperature compensating type) or 48T4 hours (high dielectric constant type), then measure. #Initial measurement for high dielectric constant type W 0 Perform a heat treatment at 150 Y10 D for one hour and then let sit for 48T4 hours at room temperature. Perform the initial measurement. *Preheating for GRM32/43/55 Step 1 2 Temperature 100D to 120D 170D to 200D Time 1 min. 1 min. The measured and observed characteristics should satisfy the specifications in the following table. 15 Appearance No marking defects Capacitance Change Within T2.5% or T0.25pF (Whichever is larger) Temperature Cycle Q/D.F. 30pFmin. : Q U1000 30pFmax. : Q U400W20C C : Nominal Capacitance (pF) R6, R7 : Within T7.5% E4, F5 : Within T20% [R6, R7] W.V. : 25Vmin. : 0.025max. W.V. : 16/10V : 0.035max. W.V. : 6.3V 0.05max. (CF3.3µF) 0.1max. (C U3.3µF) Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). Perform the five cycles according to the four heat treatments listed in the following table. Let sit for 24T2 hours (temperature compensating type) or 48T4 hour (high dielectric constant type) at room temperature, then measure. Step [E4] W.V. : 25Vmin. : 0.025max. Temp. (D) [F5] W.V. : 25Vmin. : 0.05max. (CF0.10µF) : 0.09max. (C U0.10µF) W.V. : 16V/10V : 0.125max. W.V. : 6.3Vmax. : 0.15max. Time (min.) I.R. More than 10,000MΩ or 500Ω • F (Whichever is smaller) Dielectric Strength No failure 1 2 3 4 Max. Min. Room Room Operating Operating Temp. Temp. Temp.W3/Y0 Temp.W0/Y3 30T3 2 to 3 30T3 2 to 3 #Initial measurement for high dielectric constant type W 0 Perform a heat treatment at 150 Y10 D for one hour and then let sit for 48T4 hours at room temperature. Perform the initial measurement. Continued on the following page. 24 C02E10.pdf 04.1.20 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. GRM Series Specifications and Test Methods Continued from the preceding page. Specifications No. Item Temperature Compensating Type Test Method High Dielectric Type The measured and observed characteristics should satisfy the specifications in the following table. 16 Humidity Steady State Appearance No marking defects Capacitance Change Within T5% or T0.5pF (Whichever is larger) Q/D.F. 30pF and over : QU350 10pF and over 30pF and below : QU275W5C/2 10pF and below : QU200W10C C : Nominal Capacitance (pF) 4 R6, R7 : Within T12.5% E4, F5 : Within T30% [R6, R7] W.V. : 25Vmin. : 0.05max. W.V. : 16/10V : 0.05max. W.V. : 6.3V 0.075max. (CF3.3µF) 0.125max. (CU3.3µF) [E4] W.V. : 25Vmin. : 0.05max. Let the capacitor sit at 40T2D and 90 to 95% humidity for 500T12 hours. Remove and let sit for 24T2 hours (temperature compensating type) or 48T4 hours (high dielectric constant type) at room temperature, then measure. [F5] W.V. : 25Vmin. : 0.075max. (CF0.10µF) : 0.125max. (CU0.10µF) W.V. : 16V/10V : 0.15max. W.V. : 6.3Vmax. : 0.2max. I.R. More than 1,000MΩ or 50Ω • F (Whichever is smaller) Dielectric Strength No failure The measured and observed characteristics should satisfy the specifications in the following table. Appearance Capacitance Change 17 Humidity Load Q/D.F. No marking defects Within T7.5% or T0.75pF (Whichever is larger) 30pF and over : QU200 30pF and below : QU100+10C/3 C : Nominal Capacitance (pF) R6, R7 : Within T12.5% E4 : Within T30% F5 : Within T30% [W.V. : 10Vmax.] F5 : Within W30/Y40% [R6, R7] W.V. : 25Vmin. : 0.05max. W.V. : 16/10V : 0.05max. W.V. : 6.3V 0.075max. (CF3.3µF) 0.125max. (CU3.3µF) [E4] W.V. : 25Vmin. : 0.05max. [F5] W.V. : 25Vmin. : 0.075max. (CF0.10µF) : 0.125max. (CU0.10µF) W.V. : 16V/10V : 0.15max. W.V. : 6.3Vmax. : 0.2max. I.R. More than 500MΩ or 25Ω • F (Whichever is smaller) Dielectric Strength No failure Apply the rated voltage at 40T2D and 90 to 95% humidity for 500T12 hours. Remove and let sit for 24T2 hours (temperature compensating type) or 48T4 hours (high dielectric constant type) at room temperature, then measure. The charge/discharge current is less than 50mA. #Initial measurement for F5/10V max. Apply the rated DC voltage for 1 hour at 40T2D. Remove and let sit for 48T4 hours at room temperature. Perform initial measurement. Continued on the following page. 25 C02E10.pdf 04.1.20 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. GRM Series Specifications and Test Methods Continued from the preceding page. Specifications No. Item Temperature Compensating Type Test Method High Dielectric Type The measured and observed characteristics should satisfy the specifications in the following table. Appearance No marking defects 4 Capacitance Change 18 High Temperature Load Q/D.F. Within T3% or T0.3pF (Whichever is larger) 30pF and over : QU350 10pF and over 30pF and below : QU275+5C/2 10pF and below : QU200+10C C : Nominal Capacitance (pF) R6, R7 : Within T12.5% E4 : Within T30% F5 : Within T30% (CapF1.0µF) F5 : Within W30/Y40% (CapU1.0µF) [R6, R7] W.V. : 25Vmin. : 0.05max. W.V. : 16/10V : 0.05max. W.V. : 6.3V 0.075max. (CF3.3µF) 0.125max. (CU3.3µF) [E4] W.V. : 25Vmin. : 0.05max [F5] W.V. : 25Vmin. : 0.075max. (CF0.10µF) : 0.125max. (CU0.10µF) W.V. : 16V/10V : 0.15max. W.V. : 6.3Vmax. : 0.2max. I.R. More than 1,000MΩ or 50Ω #F (Whichever is smaller) Dielectric Strength No failure Apply 200% of the rated voltage for 1000T12 hours at the maximum operating temperature T3D. Let sit for 24T2 hours (temperature compensating type) or 48T4 hours (high dielectric constant type) at room temperature, then measure. The charge/discharge current is less than 50mA. #Initial measurement for high dielectric constant type. Apply 200% of the rated DC voltage for one hour at the maximum operating temperature T3D. Remove and let sit for 48T4 hours at room temperature. Perform initial measurement. *150% for 500V and CU10µF Table A Capacitance Change from 25D (%) Char. Code Nominal Values (ppm/D)* Y55 Y30 Max. Min. Max. Min. Y0.24 Y0.17 0.58 0.40 Y000 T030 5C Y0.48 Y0.33 0.87 0.59 Y000 T060 6C 0.72 0.50 2.33 1.61 Y150 T060 6P 1.28 0.88 3.02 2.08 Y220 T060 6R 2.16 1.49 4.09 2.81 Y330 T060 6S 3.28 2.26 5.46 3.75 Y470 T060 6T 5.04 3.47 8.78 6.04 Y750 T120 7U Y Y Y Y W350 to Y1000 1X *Nominal values denote the temperature coefficient within a range of 25D to 125D (for ∆C)/85D (for other TC). 26 Y10 Max. 0.25 0.38 1.02 1.32 1.79 2.39 3.84 Y Min. Y0.11 Y0.21 0.32 0.56 0.95 1.44 2.21 Y