N
D
ES
IG
M
N
ED
ED
FO
R
N
EW
Is Now Part of
EC
O
M
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
N
O
T
R
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
D
ES
IG
N
Single-Channel: 6N135, 6N136, HCPL2503, HCPL4502
Dual-Channel: HCPL2530, HCPL2531
High Speed Transistor Optocouplers
Features
Description
■ High speed –1 MBit/s
The HCPL4502, HCPL2503, 6N135, 6N136, HCPL2530
and HCPL2531 optocouplers consist of an AlGaAs
LED optically coupled to a high speed photodetector
transistor.
■ Superior CMR – 10kV/µs
■ Dual-Channel HCPL2530/HCPL2531
EW
■ Double working voltage – 480V RMS
A separate connection for the bias of the photodiode
improves the speed by several orders of magnitude over
conventional phototransistor optocouplers by reducing
the base-collector capacitance of the input transistor.
■ CTR guaranteed 0–70°C
N
■ U.L. recognized (File # E90700)
Applications
An internal noise shield provides superior common
mode rejection of 10kV/µs. An improved package allows
superior insulation permitting a 480V working voltage
compared to industry standard of 220V.
R
■ Line receivers
FO
■ Pulse transformer replacement
■ Output interface to CMOS-LSTTL-TTL
ED
ED
■ Wide bandwidth analog coupling
M
N
Schematics
8 VCC
M
N/C 1
7 VB
3
R
_
EC
VF
6 VO
8 VCC
F1
_
_
1
2
7 V01
3
6 V02
VF2
5 GND
8
8
8
1
+ 4
5 GND
1
N
O
T
N/C 4
V
O
+ 2
+ 1
Package Outlines
6N135, 6N136, HCPL2503, HCPL4502
HCPL2530/HCPL2531
Pin 7 is not connected in
Part Number HCPL4502
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
August 2008
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Condition
Value
Units
°C
Storage Temperature
-55 to +125
TOPR
Operating Temperature
-55 to +100
TSOL
Lead Solder Temperature
260 for 10 sec
°C
IF (avg)
DC/Average Forward Input
Current Each Channel(1)
25
mA
IF (pk)
Peak Forward Input Current
Each Channel(2)
50% duty cycle, 1ms P.W.
50
mA
IF (trans)
Peak Transient Input Current
Each Channel
≤1µs P.W., 300pps
1.0
A
VR
Reverse Input Voltage Each
Channel
5
V
PD
Input Power Dissipation Each
Channel
100
mW
VEBR
Emitter-Base Reverse Voltage
VCC
Supply Voltage
VO
Output Voltage
M
N
Base Current
Output Power Dissipation
Each Channel
M
IB
PD
°C
D
ES
IG
N
FO
Peak Output Current Each
Channel
ED
IO (pk)
6N135, 6N136 and HCPL2503 only
ED
Average Output Current Each
Channel
R
6N135/6N136 and HCPL2503/4502
DETECTOR
IO (avg)
EW
EMITTER
HCPL-2530/253(3)
N
TSTG
6N135, 6N136 and HCPL2503 only
45
8
mA
16
mA
5
V
-0.5 to 30
V
-0.5 to 20
V
5
mA
6N135, 6N136, HCPL2503, HCPL4502(4)
100
mW
HCPL2530, HCPL2531
35
mW
N
O
T
R
EC
O
Notes:
1. Derate linearly above 70°C free-air temperature at a rate of 0.8mA/°C.
2. Derate linearly above 70°C free-air temperature at a rate of 1.6mA/°C.
3. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C.
4. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C.
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
2
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Absolute Maximum Ratings (TA = 25°C unless otherwise specified)
Individual Component Characteristics
Symbol
Parameter
Test Conditions
Device
Min.
Typ.*
Max.
Unit
1.7
V
VF
Input Forward Voltage
IF = 16mA, TA =25°C
1.45
Input Reverse Breakdown
Voltage
IR = 10 µA
∆VF/∆TA Temperature Coefficient of
Forward Voltage
IF = 16mA
BVR
1.8
5.0
All
IF = 0mA, VO = VCC = 15V,
TA =25°C
6N135
6N136
HCPL4502
HCPL2503
EW
IF = 0mA, VO = VCC = 5.5V,
TA =25°C
IF = 0mA, VO = VCC = 15V
R
Logic Low Supply Current
µA
50
200
IF1 = IF2 = 16mA,
VO = Open, VCC = 15V
HCPL2530
HCPL2531
200
400
IF = 0mA, VO = Open,
VCC = 15V, TA =25°C
6N135
6N136
HCPL4502
HCPL2503
1
IF = 0mA, VO = Open,
VCC = 15V
6N135
6N136
HCPL4502
HCPL2503
2
IF = 0mA, VO = Open,
VCC = 15V
HCPL2530
HCPL2531
M
N
M
O
1
120
ED
Logic High Supply Current
0.005
6N135
6N136
HCPL4502
HCPL2503
IF = 16mA, VO = Open,
VCC = 15V
ED
ICCH
0.5
All
FO
ICCL
mV/°C
0.001
N
Logic High Output Current
V
-1.6
DETECTOR
IOH
D
ES
IG
IF = 16mA
N
EMITTER
0.02
µA
µA
4
N
O
T
R
EC
*All Typicals at TA = 25°C
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
3
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Electrical Characteristics (TA = 0 to 70°C Unless otherwise specified)
Transfer Characteristics
Symbol
Parameter
Test Conditions
Device
Min. Typ.* Max. Unit
COUPLED
IF = 16mA,
VCC = 4.5V
50
6N136
HCPL4502
HCPL2531
19
27
50
HCPL2503
12
27
%
VOL = 0.4V
6N135
5
21
%
VOL = 0.5V
HCPL2530
VOL = 0.4V
6N136
HCPL4502
15
30
%
VOL = 0.5V
HCPL2531
VOL = 0.4V
HCPL2503
30
%
IF = 16mA, IO = 1.1mA,
VCC = 4.5V, TA =25°C
IF = 16mA, IO = 3mA,
VCC = 4.5V, TA =25°C
6N135
HCPL2530
9
0.18
0.4
0.18
0.5
6N136
HCPL2503
0.25
0.4
HCPL2531
0.25
%
V
0.5
IF = 16mA, IO = 0.8mA,
VCC = 4.5V
6N135
HCPL2530
0.5
IF = 16mA, IO = 2.4mA,
VCC = 4.5V
HCPL4502
HCPL2531
0.5
ED
ED
%
N
18
R
Logic LOW Output
Voltage
7
FO
VOL
6N135
HCPL2530
D
ES
IG
IF = 16mA, VO = 0.4 V,
VCC = 4.5V, TA =25°C
EW
Current Transfer
Ratio(5)
N
CTR
*All Typicals at TA = 25°C
N
O
T
R
EC
O
M
M
N
Note:
5. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF,
times 100%.
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
4
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified)
Switching Characteristics (VCC = 5V)
Propagation Delay
Time to Logic HIGH
Min.
Typ.*
Max.
Unit
6N135
HCPL2530
0.45
1.5
µs
RL = 1.9kΩ, IF = 16mA,
TA = 25°C(7) (Fig. 7)
6N136
HCPL4502
HCPL2503
HCPL2531
0.45
0.8
µs
RL = 4.1kΩ, IF = 16mA(6) (Fig. 7)
6N135
HCPL2530
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7)
6N136
HCPL4502
HCPL2503
HCPL2531
TA = 25°C, (RL = 4.1kΩ,
IF = 16mA(6) (Fig. 7)
6N135
HCPL2530
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7)
TA = 25°C
6N136
HCPL4502
HCPL2503
HCPL2531
D
ES
IG
N
TA = 25°C, RL = 4.1kΩ,
IF = 16mA(6) (Fig. 7)
2.0
µs
1.0
µs
0.5
1.5
µs
0.3
0.8
µs
R
TPLH
Propagation Delay
Time to Logic LOW
Device
EW
TPHL
Test Conditions
N
Symbol Parameter
6N135
HCPL2530
2.0
µs
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7)
6N136
HCPL4502
HCPL2503
HCPL2531
1.0
µs
6N135
HCPL2530
10,000
V/µs
IF = 0mA, VCM = 10VP-P,
RL = 1.9kΩ, TA = 25°C(8) (Fig. 8)
6N136
HCPL4502
HCPL2503
HCPL2531
10,000
V/µs
IF = 16mA, VCM = 10 VP-P,
RL = 4.1kΩ, TA = 25°C(8) (Fig. 8)
6N135
HCPL2530
10,000
V/µs
IF = 16mA, VCM = 10 VP-P,
RL = 1.9kΩ(8) (Fig. 8)
6N136
HCPL4502
HCPL2503
HCPL2531
10,000
V/µs
ED
IF = 0mA, VCM = 10VP-P,
RL = 4.1kΩ, TA = 25°C(8) (Fig. 8)
M
N
Common Mode
Transient
Immunity at
Logic Low
EC
O
|CML|
Common Mode
Transient
Immunity at
Logic High
M
|CMH|
ED
FO
RL = 4.1kΩ, IF = 16mA(6) (Fig. 7)
R
** All Typicals at TA = 25°C
N
O
T
Notes:
6. The 4.1kΩ load represents 1 LSTTL unit load of 0.36mA and 6.1kΩ pull-up resistor.
7. The 1.9kΩ load represents 1 TTL unit load of 1.6mA and 5.6kΩ pull-up resistor.
8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge
of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0V).
Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge
of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8V).
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
5
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified)
Isolation Characteristics (TA = 0 to 70°C Unless otherwise specified)
Test Conditions
Min
Input-Output Insulation
Leakage Current
Relative humidity = 45%,
TA = 25°C, t = 5s,
VI-O = 3000 VDC(9)
VISO
Withstand Insulation Test
Voltage
RH ≤ 50%, TA = 25°C, II-O ≤ 2µA,
t = 1 min.(9)
RI-O
Resistance (Input to Output)
VI-O = 500VDC(9)
2500
1MHz(9)
CI-O
Capacitance (Input to Output)
f=
HFE
DC Current Gain
IO = 3mA, VO = 5V(9)
Typ**
Max
Unit
1.0
µA
N
II-O
Characteristics
VRMS
D
ES
IG
Symbol
1012
Ω
0.6
pF
150
Input-Input Insulation Leakage RH ≤ 45%, VI-I = 500VDC(10)
Current
t = 5 s, (HCPL2530/2531 only)
RI-I
Input-Input Resistance
VI-I = 500 VDC(10)
(HCPL2530/2531 only)
CI-I
Input-Input Capacitance
f = 1MHz)(10)
(HCPL2530/2531 only)
0.005
µA
1011
Ω
0.03
pF
N
EW
II-I
N
O
T
R
EC
O
M
M
N
ED
ED
FO
R
Notes:
9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are
shorted together.
10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together.
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
6
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified)
Fig. 2 Normalized CTR vs. Temperature
1.2
1.0
1.0
0.6
0.4
VO = 0.4 V
VCC = 5 V
TA = 25°C
Normalized to:
IF = 16 mA
0.2
0.0
0.1
1
0.8
N
0.8
0.6
0.4
0.2
0.0
-60
100
-40
-20
IF - FORWARD CURRENT (mA)
8
IF = 20mA
6
IF = 15mA
4
IF = 10mA
2
IF = 5mA
4
6
8
10
12
14
100
16
18
1
0.1
-60
20
-40
-20
M
N
M
TP - PROPAGATION DELAY (ns)
RL = 4.1kΩ (TPLH)
R
RL = 1.9kΩ (TPHL)
300
RL = 1.9kΩ (TPLH)
N
O
200
IF = 16mA
VCC = 5 V
100
0
-60
-40
-20
0
20
40
60
10000
RL = 4.1kΩ (TPLH)
400
20
Fig. 6 Propagation Delay vs. Load Resistance
O
EC
500
0
TA – TEMPERATURE (°C)
T
Tp – PROPAGATION DELAY (ns)
600
100
10
Fig. 5 Propagation Delay vs. Temperature
700
80
IF = 0 mA
VCC = 5 V
VO = 5 V
VO – OUTPUT VOLTAGE (V)
800
100
EW
IF = 25mA
2
80
N
1000
ED
10
0
60
FO
IF = 30mA
0
40
R
IOH – LOGIC HIGH OUTPUT CURRENT (nA)
IF = 35mA
ED
IO – OUTPUT CURRENT (mA)
IF = 40mA
12
20
Fig. 4 Logic High Output Current
vs. Temperature
16
14
0
TA - TEMPERATURE (°C)
Fig. 3 Output Current vs. Output Voltage
TA = 25°C
VCC = 5 V
IF = 16mA
VCC = 5 V
VO = 0.4 V
Normalized to:
TA = 25°C
10
D
ES
IG
NORMALIZED CTR
NORMALIZED CTR
Fig. 1 Normalized CTR vs. Forward Current
1.2
40
60
80
IF - 16mA (TPHL)
IF - 16mA (TPLH)
IF - 10mA (TPLH)
VCC = 5 V
TA = 25°C
100
100
1
TA – TEMPERATURE (°C)
10
RL – LOAD RESISTANCE (kΩ)
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
IF - 10mA (TPHL)
1000
www.fairchildsemi.com
7
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Typical Performance Curves
+
2
7
VF
-
3
6
VCC
Pulse
Generator
tr = 5ns
Z O = 50 Ω
+5 V
VB
VO
5
3
6
VF2
+
Rm
Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL- 4502
7
2
-
C L = 1.5 µF
GND
VCC
+5 V
V01
VO
C L = 1.5 µF
IF
MONITOR
0.1 µF
4
8
RL
VF1
-
VO
I F Monitor
Rm
1
10% DUTY CYCLE
I/f < 100µS
RL
Noise
Shield
+
IF
V02
N
8
0.1 µF
GND
D
ES
IG
Pulse
Generator I
F
tr = 5ns
Z O = 50 Ω
10% D.C.
I/f < 100µs
Noise
Shield
1
4
5
Test Circuit for HCPL-2530 and HCPL-2531
IF
EW
0
5V
VO
1.5 V
N
1.5 V
VOL
TPLH
R
TPHL
Noise
Shield
1
8
+
2
A
7
VF
-
6
VFF
4
5
VB
IF
VF1
-
RL
VO
B
VO
VFF
0.1 µF
GND
-
-
VCC
+5 V
RL
2
7
3
6
4
5
V01
VO
V02
0.1 µF
GND
VCM
-
+
VCM
-
O
Pulse Gen
Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL-4502
EC
8
VF2
+
Pulse Gen
Test Circuit for HCPL-2530 and HCPL-2531
VCM 10 V
0V
90%
90%
10%
10%
tr
O
T
R
Noise
Shield
1
A
M
+
+
+5 V
M
N
3
B
VCC
ED
IF
ED
FO
Fig. 7 Switching Time Test Circuit
tf
N
VO
5V
Switch at A : IF = 0 mA
VO
VOL
Switch at A : IF = 16 mA
Fig. 8 Common Mode Immunity Test Circuit
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
8
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Test Circuits
Option
Example Part Number
Description
S
6N135S
SD
6N135SD
W
6N135W
0.4" Lead Spacing
V
6N135V
VDE0884
WV
6N135WV
VDE0884; 0.4” lead spacing
SV
6N135SV
VDE0884; surface mount
SDV
6N135SDV
Surface Mount Lead Bend
D
ES
IG
N
Surface Mount; Tape and reel
VDE0884; surface mount; tape and reel
N
EW
Marking Information
XX YY T1
ED
V
FO
R
2503
4
2
6
5
ED
3
1
Definitions
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE option –
See order entry table)
4
Two digit year code, e.g., ‘03’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
N
O
T
R
EC
O
M
M
N
1
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
9
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Ordering Information
12.0 ± 0.1
4.90 ± 0.20
4.0 ± 0.1
Ø1.55 ± 0.05
4.0 ± 0.1
1.75 ± 0.10
D
ES
IG
N
0.30 ± 0.05
7.5 ± 0.1
13.2 ± 0.2
10.30 ± 0.20
Ø1.6 ± 0.1
EW
10.30 ± 0.20
0.1 MAX
16.0 ± 0.3
N
User Direction of Feed
FO
R
Reflow Profile
215 C, 10–30 s
250
225 C peak
ED
200
150
Time above 183C, 60–150 sec
100
50
ED
Temperature (°C)
300
Ramp up = 3C/sec
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
Time (Minute)
• Peak reflow temperature: 225C (package surface temperature)
• Time of temperature higher than 183C for 60–150 seconds
• One time soldering reflow is recommended
N
O
T
R
EC
O
M
M
N
0
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
10
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Tape Specifications
T
O
N
ED
ED
M
N
M
O
EC
R
R
FO
EW
N
N
D
ES
IG
T
O
N
ED
ED
M
N
M
O
EC
R
R
FO
EW
N
N
D
ES
IG
T
O
N
ED
ED
M
N
M
O
EC
R
R
FO
EW
N
N
D
ES
IG
N
D
ES
IG
EW
N
R
FO
ED
ED
M
N
M
O
EC
N
O
T
R
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com