HCPL4503SVM

Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M 8-Pin DIP High Speed Transistor Optocouplers Features Description • • • • The 6N135M, 6N136M, HCPL4503M, HCPL2530M, and HCPL2531M optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor for each channel. High Speed – 1 MBit/s Dual-Channel: HCPL2530M, HCPL2531M CTR Guaranteed 0°C to 70°C No Base Connection for Improved Noise Immunity (HCPL4503M) • Superior CMR of 15,000 V/μs Minimum (HCPL4503M) • Safety and Regulatory Approvals – UL1577, 5,000 VACRMS for 1 Minute – DIN EN/IEC60747-5-5 Applications • • • • The HCPL4503M has no internal connection to the phototransistor base for improved noise immunity. An internal noise shield provides superior common mode rejection of up to 50,000 V/μs. Related Resources Line Receivers Pulse Transformer Replacement Output Interface to CMOS-LSTTL-TTL Wide-Bandwidth Analog Coupling • • • • Schematics N/C 1 A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. www.fairchildsemi.com/products/optoelectronics/ www.fairchildsemi.com/pf/HC/HCPL0500.html www.fairchildsemi.com/pf/FO/FODM452.html www.fairchildsemi.com/pf/FO/FOD050L.html Package Outlines 8 VCC + 1 8 VCC 8 8 1 1 V F1 + 2 7 VB _ 2 7 V01 3 6 V02 V F _ 3 6 VO _ 8 V F2 N/C 4 5 GND 6N135M, 6N136M, HCPL4503M + 4 8 1 1 Figure 2. Package Outlines 5 GND HCPL2530M, HCPL2531M Pin 7 is not connected in the HCPL4503M Figure 1. Schematics ©2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — 8-Pin DIP High Speed Transistor Optocouplers January 2016 As per DIN EN/IEC 60747-5-5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Parameter Installation Classifications per DIN VDE 0110/1.89 Table 1, For Rated Mains Voltage Characteristics < 150 VRMS I–IV < 300 VRMS I–IV < 450 VRMS I–III < 600 VRMS I–III Climatic Classification 40/100/21 Pollution Degree (DIN VDE 0110/1.89) 2 Comparative Tracking Index Symbol VPR 175 Parameter Value Unit Input-to-Output Test Voltage, Method A, VIORM x 1.6 = VPR, Type and Sample Test with tm = 10 s, Partial Discharge < 5 pC 1,335 Vpeak Input-to-Output Test Voltage, Method B, VIORM x 1.875 = VPR, 100% Production Test with tm = 1 s, Partial Discharge < 5 pC 1,669 Vpeak 890 Vpeak VIORM Maximum Working Insulation Voltage VIOTM Highest Allowable Over-Voltage 6,000 Vpeak External Creepage ≥ 8.0 mm External Clearance External Clearance (for Option TV, 0.4" Lead Spacing) DTI TS IS,INPUT PS,OUTPUT RIO ≥ 7.4 mm ≥ 10.16 mm ≥ 0.5 mm Case Temperature(1) 150 °C Input Current(1) 200 mA 300 mW > 109 Ω Distance Through Insulation (Insulation Thickness) Output Power (Duty Factor ≤ 2.7%)(1) Insulation Resistance at TS, VIO = 500 V(1) Note: 1. Safety limit value - maximum values allowed in the event of a failure. ©2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 2 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — 8-Pin DIP High Speed Transistor Optocouplers Safety and Insulation Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA = 25°C unless otherwise specified. Symbol Parameter Test Conditions Value Unit TSTG Storage Temperature -40 to +125 °C TOPR Operating Temperature -40 to +100 °C TJ TSOL Junction Temperature Lead Solder Temperature -40 to +125 °C 260 for 10 sec °C 25 mA 50 mA 1.0 A 5 V 45 mW EMITTER IF (avg) IF (pk) IF (trans) VR PD DC/Average Forward Input Current Each Channel(2) 50% Duty Cycle, 1 ms P.W. Peak Forward Input Current Each Channel(3) Peak Transient Input Current Each Channel ≤ 1 μs P.W., 300 pps Reverse Input Voltage Each Channel Input Power Dissipation Each Channel(4) DETECTOR IO (avg) Average Output Current Each Channel 8 mA IO (pk) Peak Output Current Each Channel 16 mA VEBR Emitter-Base Reverse Voltage 5 V VCC Supply Voltage -0.5 to 30 V VO Output Voltage IB Base Current PD Output Power Dissipation Each Channel(5) 6N135M and 6N136M 6N135M and 6N136M -0.5 to 20 V 5 mA 100 mW Notes: 2. Derate linearly above 70°C free-air temperature at a rate of 0.8 mA/°C. 3. Derate linearly above 70°C free-air temperature at a rate of 1.6 mA/°C. 4. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C. 5. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC Parameter Supply Voltage Min. Max. Unit 4.5 20.0 V TA Ambient Operating Temperature 0 70 °C IFL Input Current, Low Level 0 250 μA IFH Input Current, High Level(6) 6.3 20.0 mA Note: 6. 6.3 mA is a guard banded value which allows for at least 20% CTR degradation. Initial input current threshold value is 5.0 mA or less. ©2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 3 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — 8-Pin DIP High Speed Transistor Optocouplers Absolute Maximum Ratings VCC = 5.0 V, TA = 0°C to 70°C unless otherwise specified. Individual Component Characteristics Symbol Parameter Device Test Conditions Min. Typ. Max. 1.45 1.70 Unit EMITTER VF BVR ΔVF/ΔTA All IF = 16 mA, TA = 25°C All IF = 16 mA All IR = 10 µA Temperature Coefficient All of Forward Voltage IF = 16 mA Input Forward Voltage Input Reverse Breakdown Voltage 1.80 5 V 21 V -1.7 mV/°C DETECTOR IF = 0 mA, VO = VCC = 5.5 V, TA = 25°C 0.0007 0.5 6N135M, IF = 0 mA, VO = VCC = 15 V, 6N136M, TA = 25°C HCPL4503M 0.0019 1 All IOH Logic High Output Current All ICCL ICCH Logic Low Supply Current Logic High Supply Current IF = 0 mA, VO = VCC = 15 V 6N135M, IF = 16 mA, VO = Open, 6N136M, VCC = 15 V HCPL4503M HCPL2530M, IF1 = IF2 = 16 mA, HCPL2531M VO = Open, VCC = 15 V 6N135M, IF = 0 mA, VO = Open, 6N136M, VCC = 15 V HCPL4503M HCPL2530M, IF = 0 mA, VO = Open, HCPL2531M VCC = 15 V ©2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 µA 50 163 200 µA 400 0.0004 2 µA 4 www.fairchildsemi.com 4 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — 8-Pin DIP High Speed Transistor Optocouplers Electrical Characteristics TA = 0°C to 70°C unless otherwise specified. Transfer Characteristics Symbol Parameter Device Test Conditions Min. Typ. Max. Unit 7 38 50 % 19 38 50 % COUPLED 6N135M, HCPL2530M CTR Current Transfer Ratio(7) 6N136M, HCPL4503M, HCPL2531M IF = 16 mA, VO = 0.4 V, VCC = 4.5 V, TA = 25°C 6N135M VOL = 0.4 V HCPL2530M VOL = 0.5 V IF = 16 mA, 6N136M, VCC = 4.5 V HCPL4503M HCPL2531M VOL = 0.4 V VOL % 15 % VOL = 0.5 V 6N135M Logic LOW Output Voltage 5 IF = 16 mA, IO = 1.1 mA, HCPL2530M VCC = 4.5 V, TA = 25°C 0.12 6N136M, HCPL4503M IF = 16 mA, IO = 3 mA, VCC = 4.5 V, TA = 25°C HCPL2531M 0.20 6N135M, IF = 16 mA, IO = 0.8 mA, HCPL2530M VCC = 4.5 V HCPL4503M, IF = 16 mA, IO = 2.4 mA, HCPL2531M VCC = 4.5 V 0.4 0.5 0.4 0.5 0.11 0.5 0.18 0.5 V Note: 7. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. ©2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 5 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — 8-Pin DIP High Speed Transistor Optocouplers Electrical Characteristics (continued) TA = 0°C to 70°C unless otherwise specified. Switching Characteristics Symbol Parameter Device Test Conditions Max. Unit 1.5 µs 0.8 µs 6N135M, RL = 4.1 kΩ, IF = 16 mA(8) HCPL2530M (Figure 15) 2.0 µs 6N136M, R = 1.9 kΩ, IF = 16 mA(9) HCPL4503M, L (Figure 15) HCPL2531M 1.0 µs 1.5 µs 0.8 µs 2.0 µs 1.0 µs 6N135M TA = 25°C, RL = 4.1 kΩ, (8) HCPL2530M IF = 16 mA (Figure 15) tPHL Propagation Delay Time to Logic LOW 6N136M, RL = 1.9 kΩ, HCPL4503M TA = 25°C, (9) IF = 16 mA (Figure 15) HCPL2531M 6N135M TA = 25°C, RL = 4.1 kΩ, (8) I HCPL2530M F = 16 mA (Figure 15) tPLH Propagation Delay Time to Logic HIGH 6N136M, RL = 1.9 kΩ, HCPL4503M TA = 25°C, (9) IF = 16 mA (Figure 15) HCPL2531M 6N135M, RL = 4.1 kΩ, IF = 16 HCPL2530M (Figure 15) Min. Typ. 0.23 0.25 0.25 0.28 0.45 0.29 0.26 0.18 mA(8) 6N136M, R = 1.9 kΩ, IF = 16 mA(9) HCPL4503M, L (Figure 15) HCPL2531M |CMH| Common Mode Transient Immunity at Logic High IF = 0 mA, VCM = 10 VP-P, 6N135M, RL = 4.1 kΩ, TA = 25°C(10) HCPL2530M (Figure 16) 10,000 IF = 0 mA, VCM = 10 VP-P, 6N136M, RL = 1.9 kΩ, TA = 25°C(10) HCPL2531M (Figure 16) 10,000 V/µs IF = 0 mA, VCM = 1,500 VP-P, HCPL4503M RL = 4.1 kΩ, TA = 25°C(10) 15,000 50,000 (Figure 16) |CML| Common Mode Transient Immunity at Logic Low IF = 16 mA, VCM = 10 VP-P, 6N135M, RL = 4.1 kΩ, TA = 25°C(10) HCPL2530M (Figure 16) 10,000 IF = 16 mA, VCM = 10 VP-P, 6N136M, RL = 1.9 kΩ(10) HCPL2531M (Figure 16) 10,000 V/µs IF = 0 mA, VCM = 1,500 VP-P, HCPL4503M RL = 4.1 kΩ, TA = 25°C(10) 15,000 50,000 (Figure 16) Notes: 8. The 4.1 kΩ load represents 1 LSTTL unit load of 0.36 mA and 6.1 kΩ pull-up resistor. 9. The 1.9 kΩ load represents 1 TTL unit load of 1.6 mA and 5.6 kΩ pull-up resistor. 10. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0 V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8 V). ©2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 6 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — 8-Pin DIP High Speed Transistor Optocouplers Electrical Characteristics (continued) Symbol Parameter Device Test Conditions Min. 5,000 VISO Withstand Isolation Test Voltage All RH ≤ 50%, II-O ≤ 10 µA t = 1 minute, f = 50 Hz(11)(13) RI-O Resistance (Input to Output) All VI-O = 500 VDC(11) CI-O Capacitance (Input to Output) All f = 1 MHz, VI-O = 0 VDC(11) II-I Input-Input Insulation Leakage Current RI-I CI-I Typ. Max. Unit VACRMS 1011 Ω 1 pF HCPL2530M, RH ≤ 45%, HCPL2531M VI-I = 500 VDC, t = 5 s(12)