HL02R12S15YC

2 WATT REGULATED DC/DC CONVERTER Product Data Sheet HL02RYC FEATURES LOW COST INTERNAL FILTERING SURFACE MOUNT CONSTRUCTION TEMPERATURE RANGE: -25°C TO +70°C INDUSTRY STANDARD PINOUT ROHS COMPLIANT DESCRIPTION The HL02RYC Series offers an extensive selection of input and output voltage combinations to choose from. These miniature, regulated DC/DC converters come in 24 pin DIP and SMD packages. This small size is possible through the use of surface mount manufacturing technologies. The HL02RYC Series utilizes a 110 KHz push-pull oscillator in the input stage with low-drop regulators on the outputs, reducing the output noise and maintaining good efficiency. The use of surface mount construction and automated manufacturing processes increase consistency and reliability while reducing overall cost. ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation.......................................................1.5W Short Circuit Duration.............................................................30 Sec Lead Temperature (soldering, 10 seconds max)................+300°C ORDERING INFORMATION HL02R xxyzz Y Device Family HL Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option RoHS Compliant C * *Note: Refer to Reflow Profile for SMD Models. TYPICAL PERFORMANCE CURVES Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. EFFICIENCY vs LOAD 100% Efficiency 　 50% 0% For full details go to www.murata-ps.com/rohs 0% 25% 50% 75% 100% Load www.murata-ps.com Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000 TDC_HL02RYC.B02 Page 1 of 3 ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. NOMINAL INPUT VOLTAGE MODEL HL02R05S05YC HL02R05S12YC HL02R05S15YC HL02R12S05YC HL02R12S12YC HL02R12S15YC HL02R15S05YC HL02R15S12YC HL02R15S15YC HL02R24S05YC HL02R24S12YC HL02R24S15YC HL02R05D12YC HL02R05D15YC HL02R12D12YC HL02R12D15YC HL02R15D12YC HL02R15D15YC HL02R24D12YC HL02R24D15YC (VDC) 5 5 5 12 12 12 15 15 15 24 24 24 5 5 12 12 15 15 24 24 RATED OUTPUT VOLTAGE (VDC) 5 12 15 5 12 15 5 12 15 5 12 15 ±12 ±15 ±12 ±15 ±12 ±15 ±12 ±15 RATED OUTPUT CURRENT (mA) 400 166 134 400 166 134 400 166 134 400 166 134 ±83 ±67 ±83 ±67 ±83 ±67 ±83 ±67 INPUT CURRENT MIN LOAD (mA) 70 70 70 40 40 40 30 30 30 15 15 15 70 70 40 40 30 30 15 15 RATED LOAD (mA) 640 580 580 280 250 250 230 200 200 135 120 120 640 640 270 270 220 220 135 135 2 WATT REGULATED DC/DC CONVERTER HL02RYC EFFICIENCY (%) 62 69 69 60 67 67 58 67 67 62 67 67 62 62 62 62 61 61 62 62 Note: Other input to output voltages may be available. Please contact factory. COMMON SPECIFICATIONS PARAMETER INPUT Voltage Range Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. CONDITIONS MIN 4.75 11.4 14.25 22.8 TYP 5 12 15 24 30 MAX 5.25 12.6 15.75 25.2 100 UNITS VDC VDC VDC VDC mAp-p Reflected Ripple Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Temperature Coefficent Ripple & Noise 5V Output -- Singles Only Line Regulation Load Regulation GENERAL Switching Frequency Package Weight MTTF per MIL-HDBK-217, Rev. F Ground Benign 60 Hz, 10 Seconds 500 500 1 25 2 VISO= 240VAC, 60Hz VDC Vpk G pF μArms BW = DC to 10MHz BW =10Hz to 2MHz High Line to Low Line Rated Load to No Load 2 ±0.5 ±0.02 25 10 250 ±0.5 ±0.5 110 12 ±5 100 350 ±1 ±1 W % %/°C mVp-p mVrms mVp-p % % kHz g kHr kHr Circuit Stress Method TA = +25°C TA = +70°C 1100 20 TEMPERATURE Specification Operation Storage -25 -40 -40 +70 +85 +110 °C °C °C www.murata-ps.com Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000 TDC_HL02RYC.B02 Page 2 of 3 2 WATT REGULATED DC/DC CONVERTER MECHANICAL Package/Pinout "Y" TOP VIEW HL02RYC HL02RxxyzzYC SIDE VIEW END VIEW DIP PACKAGE NU = Do Not Use. NC = No Internal Connection. Duplicate pin functions are internally connected. All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) Typically Marked with: specific model ordered, date code, job code and Logo. Pin base metal is phosphor bronze. Pin finish is matte tin (100-300 microinches) over a nickel barrier layer (5-40 microinches). 1 2 3 10 11 12 13 14 15 22 23 24 PIN CONNECTIONS PIN# SINGLES +VIN NU NU -VOUT +VOUT -VIN -VIN +VOUT -VOUT NU NU +VIN DUALS +VIN -VOUT Common Common +VOUT -VIN -VIN +VOUT Common Common -VOUT +VIN THROUGH-HOLE SOLDERING INFORMATION These devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering. USA: Canada: UK: France: Germany: Japan: China: Singapore: Mansfield (MA), Tel: (508) 339-3000, email: sales@murata-ps.com Toronto, Tel: (866) 740-1232, email: toronto@murata-ps.com Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com München, Tel: +49 (0)89-544334-0, email: munich@murata-ps.com Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com Parkway Centre, Tel: +65 6348 9096, email: singapore@murata-ps.com Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000 Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com ISO 9001 REGISTERED 10/10/08 Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2008 Murata Power Solutions, Inc. www.murata-ps.com TDC_HL02RYC.B02 Page 3 of 3