HN-210DX

HN-210D Features: • 2.4GHz frequency hopping spread spectrum technology • 460Kbps over the air and 115Kbps I/O data rates • 64 hopping patterns • FCC certified and CE marked • Integral 6dB patch antenna • RS-232 asynchronous serial interface Benefits: • Exceptional immunity to multipath fading and jamming • Supports high speed applications needing long range • Co-location of multiple networks without interference • License-free application worldwide • Cost-effective, simple installation • Connects to PC serial ports 2.4GHz Frequency Hopping Wireless Data Modem The HN-210D is a versatile, low cost, multi-purpose 2.4 GHz frequency-hopping wireless data modem. The HN-210D communicates through a serial port and over the air at 460.8Kbps and supports both point-to-point and point-to-multipoint networks. Specifications HN-210D HN-210DX Frequency Band Licensing Unlicensed under FCC Part 15, ETSI 300.328 Number of Channels Hopping Patterns 75 - US & ETSI, 25 France User configurable, 64 patterns (networks) available I/O Data Rates Up to 115.2 Kbps asynchronous RF Channel Rate 460 Kbps Line of Site Range > 5 miles RF Bandwidth 750 KHz Modulation Type GFSK Output Impedance Network Protocol Transmit Power Receive Sensitivity HN-214D 2401 - 2471 MHz (USA) 2448 - 2480 MHz (France, Spain) 50 ohms Dynamically assigned TDMA with ARQ EIRP: +16dBm/+24dBm +18dBm EIRP: +16dBm/+24dBm -99dBm for 10-5 BER -93 dBm for 10-5 BER -99dBm for 10-5 BER Power Requirements 9 Vdc 160mA typ. 750mA surge Serial Data Interface Async. RS-232 Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2010 HN-210D 10/11/16 1 of 3 www.murata.com Mechanical Specifications Antenna HN-210D HN-210DX HN-214D Integrated 6dB patch n/a Integrated 6dB patch Case Materials Polycarbonate, NEMA 4X Dimensions (mm) 130 x 79 x 35 (excl. flange) Weight excl. cable 235g Antenna Connector n/a Data Connector TNC male n/a 9-Pin D Power Connector 2 terminal connector Environmental Specifications Temperature Range -30°C to +70°C (radio enclosure) Humidity 95% at +40°C, Non-condensing HN-210D with 50 feet of cable Serial adapter box Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2010 HN-210D 10/11/16 2 of 3 Power supply www.murata.com Built around the WIT2410 radio, the HN-210D has an integral 6dB patch antenna creating a "single piece" modem. Communication with the HN-210D is through a 115.2Kbps asynchronous serial port supporting a standard RS-232 interface. The HN-210D communicates over the air at 460.8Kbps and supports both point-to-point and point-to-multipoint networks. With a NEMA 4X weatherproof enclosure and aluminum mounting flange, the HN-210D is simple to install on the side of a building or attached to a mast. With no antenna to connect, the HN-210D is simply mounted where the antenna would ordinarily be mounted. This removes the need for long antenna cable runs, expensive in terms of both cost and performance. The HN-210D comes with a 50-foot cable that connects to a DIN-rail mount serial adapter box (standard RS-232 serial 9-pin D connection) making installation in equipment cabinets simple. The HN-214D comes with a 4-foot cable for use when long cable runs are not needed. The serial adapter box also provides power to the HN-210D through a universal 110/220 50/60 wall-mount power supply (also included). The integral 6dB patch antenna provides a line-of-site range of several miles, making the HN-210D ideal for a variety of "last mile" applications. For applications requiring more antenna gain, the HN-210DX replaces the built-in patch antenna with an external TNC connector. When paired with the Cirronet SNAP2410 family of products, the HN-210D provides a cost-effective link from remote devices to Ethernet/IP-based applications. These applications include Intranet-based applications as well as Internet access. The HN-210D also is ideal for use in SCADA applications as remote modems in multipoint configurations and is an extremely cost-effective solution for point-to-point installations. Selectable transmit power levels of 10mW and 100mW allow the HN-210D to be used worldwide, even with the gain of the patch antenna. Based on the Cirronet WIT2410 spread spectrum frequencyhopping radio, the HN-210D has exceptional multipath fade rejection as well as immunity to jamming. The WIT2410 is a field proven performer that delivers robust, reliable, real-world performance. The HN-210D is both FCC and CE marked. Operating in the 2.4GHz ISM band, the HN-210D can be deployed around the world without a license. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2010 HN-210D 10/11/16 3 of 3 www.murata.com