HPR109WC

HPR1XXWC Series 0.75 Watt Single Output DC/DC Converter FEATURES Low Cost Multiple Package Styles Internal Input and Output Filtering Non-Conductive Case High Output Power Density: 10 Watts/Inch3 Extended Temperature Range: -25°C to +85°C Efficiency to 79% RoHS Compliant The HPR1XXWC Series uses advanced circuit design and packaging technology to deliver superior reliability and performance. A 170kHz push-pull oscillator is used in the input stage. Beat-frequency oscillation problems are reduced when using the HPR1XXWC Series with high frequency isolation amplifiers. Reduced parts count and high efficiency add to the reliability of the HPR1XXWC Series. The high efficiency of the HPR1XXWC Series means less internal power dissipation, as low as 190mW. With reduced heat dissipation the HPR1XXWC Series can operate at higher temperatures with no degradation. In addition, the high efficiency of the HPR1XXWC Series means the series is able to offer greater than 10 W/inch3 of output power density. Operation down to no load will not impact the reliability of the series, although a >1mA minimum load is needed to realize published specifications. The HPR1XXWC Series provides the user a low cost converter without sacrificing reliability. The use of surface mounted devices and advanced manufacturing technologies make it possible to offer premium performance and low cost. All specifications are typical at TA = +25°C nominal input voltage unless otherwise specified. PRODUCT SELECTION CHART MODEL HPR100WC HPR101WC HPR102WC HPR103WC HPR104WC HPR105WC HPR106WC HPR107WC HPR108WC HPR109WC HPR110WC HPR111WC HPR112WC HPR113WC HPR114WC HPR115WC HPR116WC HPR117WC HPR118WC HPR119WC HPR120WC HPR121WC HPR122WC HPR123WC NOMINAL INPUT VOLTAGE (VDC) 5 5 5 5 5 5 12 12 12 12 12 12 15 15 15 15 15 15 24 24 24 24 24 24 RATED OUTPUT VOLTAGE (VDC) 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 RATED OUTPUT CURRENT (mA) 150 62 50 ±75 ±30 ±25 150 62 50 ±75 ±30 ±25 150 62 50 ±75 ±30 ±25 150 62 50 ±75 ±30 ±25 INPUT CURRENT NO LOAD (mA) 20 20 20 20 20 20 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 8 8 RATED LOAD (mA) 216 212 212 218 212 200 90 81 81 88 81 81 72 72 72 72 63 63 48 48 45 45 45 45 REFLECTED RIPPLE CURRENT (mAp-p) 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 15 15 15 15 15 15 EFFICIENCY (%) 69 70 71 68 68 75 69 77 77 71 74 77 69 69 69 69 76 79 65 65 76 69 67 69 Note: Other input to output voltages may be available. Please contact Murata Power Solutions. 　 For full details go to www.murata-ps.com/rohs www.murata-ps.com Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000 TDC_HPR1xxWC.B01 Page 1 of 4 HPR1XXWC Series 0.75 Watt Single Output DC/DC Converter SPECIFICATIONS, ALL MODELS PARAMETER INPUT Voltage Range Specifications are at TA = +25°C nominal input voltage unless otherwise specified. CONDITIONS MIN TYP MAX UNITS 4.5 5 5.5 VDC 10.8 12 13.2 VDC 13.5 15 16.5 VDC 21.6 24 26.4 VDC Voltage Rise Time See Typical Performance Curves & Application Notes: “Capacitive Loading Effects on Start-Up of DC/DC Converters” OUTPUT Rated Power 750 mW Voltage Setpoint Accuracy Rated Load, Nominal VIN ±5 % Ripple & Noise BW = DC to 10MHz 150 200 mVp-p BW =10Hz to 2MHz 30 40 mVrms Voltage (Over Input Voltage Range) 1mA to Rated Current, VOUT = 5V 4.75 7 VDC 1mA to Rated Current, VOUT = 12V 11.40 15 VDC 1mA to Rated Current, VOUT = 15V 14.25 18 VDC Temperature Coefficent .01 .05 %/ °C REGULATION Load Regulation (All other modes) Rated Load to 1mA Load 3 % GENERAL ISOLATION Rated Voltage 750 VDC Test Voltage 60 Hz, 10 Seconds 750 Vrms Resistance 10 GΩ Capacitance 25 100 pF Leakage Current VISO= 240VAC, 60Hz 2 8.5 μArms Switching Frequency 170 kHz Frequency Change Over Line and Load 24 % Package Weight 3 g MTTF per MIL-HDBK-217, Rev. F* Circuit Stress Method Ground Benign TA = +25°C 7.9 MHr Fixed Ground TA = +35°C 1.9 MHr Naval Sheltered TA = +35°C 1.2 MHr Airborne Uninhabited Fighter TA = +35°C 300 kHr Moisture Sensitivity Level (MSL) IPC/JEDEC J-STD-20 2 TEMPERATURE Specification -25 +25 +85 °C Operation -40 +100 °C Storage -40 +110 °C GENERAL OUTPUT SOLDERING INFORMATION The surface mount versions of the HPR1XXWC series are designed for SMT reflow soldering. During this standard process devices should be heated at a rate not to exceed 3 degrees C per second. The peak reflow temperature is 260 degrees C. The device should not be exposed to the peak temperature ±10 degrees C for more than 12 seconds. The cool down rate for this device should not exceed 3 degrees C per second. www.murata-ps.com Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000 TDC_HPR1xxWC.B01 Page 2 of 4 HPR1XXWC Series 0.75 Watt Single Output DC/DC Converter TYPICAL PERFORMANCE CURVES Specifications are at TA = +25°C nominal input voltage and nominal load. VOUT VS LOAD (5Vout Models) 5.7 5.5 Vout Vout 5.3 5.1 4.9 0 40 80 120 160 Output Current (mA) VOUT VS LOAD (±12Vout Models) 12.6 12.5 12.4 Vout 12.3 12.2 12.1 12.0 0 10 20 30 40 Output Current each load (mA) Vout Vout 15.5 15.3 15.1 14.9 0 20 40 60 80 Output Current each load (mA) OSCILLATION FREQUENCY VS TEMPERATURE 220 Frequency (KHz) 200 180 160 140 80 100 -30 0 30 Temperature (°C) 60 90 15.9 15.7 5.4 5.2 Vout 5.0 4.8 12.0 4.6 0 20 40 60 80 Output Current each load (mA) VOUT VS LOAD (15Vout Models) 16.5 16.0 15.5 15.0 14.5 14.0 13.5 0 0.2 0.4 0.6 0.8 1.0 Output Power each load (Watts) 11.9 0 20 40 60 80 Output Current each load (mA) VOUT VS LOAD (±15Vout Models) VOUT VS LOAD (±5Vout Models) 12.5 12.4 12.3 12.2 12.1 VOUT VS LOAD (12Vout Models) EFFICIENCY VS LOAD 90 75 Efficiency (%) 60 45 30 15 0 0 20 40 60 % of Rated Load (%) SAFE OPERATING AREA 600 LOAD CAPACITANCE vs INPUT RISE TIME (5 Vout models) 60 LOAD CAPACITANCE vs INPUT RISE TIME (15 Vout models) 500 50 Total Load Capacitance (uF) Total Load Capacitance (uF) 400 40 300 30 SAFE OPERATING AREA 200 SAFE OPERATING AREA 20 100 10 0 0 5 10 15 20 25 30 35 Rise Time of Input Voltage (mS) 40 45 50 0 0 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) LOAD CAPACITANCE vs INPUT RISE TIME (12 Vout models) 90 NOTES: 1.) When operated within the SAFE OPERATING AREA as defined by the above curves, the output voltage of HPR1XXC devices is guaranteed to be within 95% of its steady-state value within 100 milliseconds after the input voltage has reached 95% of its steady-state value. 2.) For dual output models, total load capacitance is the sum of the capacitances on the plus and minus outputs. Total Load Capacitance (uF) 80 70 60 50 40 30 20 10 0 0 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) SAFE OPERATING AREA www.murata-ps.com Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000 TDC_HPR1xxWC.B01 Page 3 of 4 HPR1XXWC Series 0.75 Watt Single Output DC/DC Converter MECHANICAL PACKAGE/PINOUT “W” SMD PACKAGE 0.785±0.010" (19.94±0.25) 14 13 11 10 9 8 0.525±0.010" (13.34±0.25) 0.695±0.015" (17.65±0.38) TOP VIEW 1234567 0.375±0.005" (9.52±0.13) 0.015±0.005" (0.38±0.13) 0.020±0.002" (0.51±0.05) 0.100±0.010" (2.54±0.25) SIDE VIEW BOTTOM VIEW 0.014±0.002" (0.36±0.05) .015±.010" (.38±.26) PIN CONNECTIONS PIN# 1 2 3 4 5 6 SINGLES +VIN -VIN NC NC -VOUT NC DUALS +VIN -VIN NC NC -VOUT Common PIN# 7 8 9 10 11 13 14 SINGLES +VOUT NC NC NC NC NC NC DUALS +VOUT NC NC NC NC NC NC NOTES: NC = Do Not Connect. Duplicate pin functions are internally connected. All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) MATERIAL: Lead material is phosphor bronze; lead finish is 100-300 microinches of matte tin over a nickel barrier layer of 5-40 microinches. ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation ........................................ 450mW Short Circuit Duration ................................................ Momentary ORDERING INFORMATION HPR 1XX W Device Family HPR Indicates DC/DC Converter Model Number Selected from Table of Electrical Characteristics Package Option W = SMD Package RoHS Compliant Version C USA: UK: France: Japan: Mansfield (MA), Tel: (508) 339-3000, email: sales@murata-ps.com Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com Website: www.murata-ps.jp Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com Canada: Toronto, Tel: (866) 740-1232, email: toronto@murata-ps.com Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com ISO 9001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2008 Murata Power Solutions, Inc. Germany: München, Tel: +49 (0)89-544334-0, email: munich@murata-ps.com China: 05/09/08 www.murata-ps.com Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000 TDC_HPR1xxWC.B01 Page 4 of 4