HPR203C

Product Data Sheet 3.0 WATT MINIATURE SIP DC/DC CONVERTER HPR2XXC • • • • • FEATURES • • • • • ROHS COMPLIANT FOUR CHANNELS OF ISOLATED POWER HIGH OUTPUT POWER DENSITY: > 9. 4 WATTS/INCH3 EXTENDED TEMPERATURE RANGE: -25°C TO +85°C HIGH EFFICIENCY: TO 84% LOW COST HIGH ISOLATION VOLTAGE: 750V CONTINUOUS INPUT-TO-OUTPUT AND CHANNEL-TO-CHANNEL SINGLE IN-LINE PACKAGE (SIP) INTERNAL INPUT AND OUTPUT FILTERING NON-CONDUCTIVE CASE The HPR2XXC Series is designed for multiple channel applications that require small size and could benefit from a complete one-package solution. The HPR2XXC Series offers four isolated channels of output power in a footprint less than the size of many singular devices. This unregulated series of DC/DC converters provides three watts of total output power. Each isolated channel can supply up to 750mW. The HPR2XXC Series uses advanced circuit design and packaging technology to realize superior reliability and performance. With only one switching converter on the board, the HPR2XXC eliminates the possibility of separate converters creating beat frequencies, or "aliasing" in multiple channel applications. The high efficiency of the HPR2XXC Series means less internal power dissipation than comparable solutions. With reduced heat to dissipate, the HPR2XXC Series can operate at higher temperatures with no degradation in reliablility. In addition, the high efficiency of the HPR2XXC Series provides greater than 9 watts/inch3 output power density. The HPR2XXC Series offers the user low cost without sacrificing reliability. The use of surface mounted devices and manufacturing technologies make it possible to offer premium performance and low cost. MECHANICAL PIN CONNECTIONS 2.210+.010 (56.13) 1. -VOUT1 5.-VOUT2 2. COM 1 6. COM2 0.340+.010 (8.64) 3 +VOUT1 7.+VOUT2 9. +VIN 10.-VIN 14. -VOUT3 15. COM3 16. +VOUT3 18. -VOUT4 19. COM 4 20. +VOUT4 TOP VIEW 0.340+.010 (8.64) FRONT VIEW 0.030+.010 (0.76) 0.020+.002 (0.51) 0.400+.010 (10.16) RIGHT SIDE VIEW 0.140+.020 (0.25) 0.010+.002 (0.25) 0.050+.015 (1.27) 0.155+.015 (3.94) BOTTOM VIEW 12 3 567 9 10 14 15 16 18 19 20 All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) PIN PLACEMENT TOLERANCE: ± 0.015" Marked with: specific model ordered, date code, and job code. HPR2XXCC REV. B (MPS) 12/2008 Page 1 ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. NOMINAL INPUT MODEL HPR203C HPR204C HPR205C HPR210C HPR211C HPR216C HPR217C HPR221C HPR223C RATED OUTPUT VOLTAGE (VDC) 5 5 5 12 12 15 15 24 24 RATED OUTPUT VOLTAGE (VDC) ±5.2 ±12 ±15 ±12 ±15 ±12 ±15 ±5.0 ±15 RATED OUTPUT CURRENT (mA) ±73 ±30 ±25 ±30 ±25 ±30 ±25 ±75 ±25 INPUT CURRENT NO LOAD (mA) 70 75 75 30 30 20 20 20 20 RATED LOAD (mA) 820 750 750 305 300 240 240 170 155 REFLECTED RIPPLE CURRENT (mAp-p) 35 35 35 15 15 15 20 20 20 EFFICIENCY (%) 74 80 80 82 84 83 84 74 81 Note: Other input to output voltage options may be available. Please consult factory. COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. PARAMETER INPUT Voltage Range CONDITIONS MIN 4.5 10.8 13.5 21.6 At Startup Input to Output, Channel to Channel 60 Hz, 10 seconds 750 750 10 30 4 3 750 Rated Load, Nominal VIN BW = DC to 10MHz BW =10Hz to 2MHz IL=1mA, VOUT = 5V IL=1mA, VOUT = 12V IL=1mA, VOUT = 15V ±5 40 7 8 17 20 .05 High Line to Low Line Rated Load to 1mA Load Rated Load to 1mA Load 1 10 3 300 7 5 20 1.8 450 270 45 TYP 5 12 15 24 MAX 5.5 13.2 16.5 26.4 1 UNITS VDC VDC VDC VDC V/μsec Amps VDC Vpk G pF μArms W mW % mVp-p mVrms VDC VDC VDC %/Deg C %/%VIN % % kHz g % % MHr kHr kHr kHr Voltage Rise Time In Rush Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Total Rated Power Rated Power Each Channel Voltage Setpoint Accuracy Ripple & Noise Voltage VISO= 240VAC, 60Hz Temperature Coefficent REGULATION Line Regulation Load Regulation (5V out only) Load Regulation (All other Models) GENERAL Switching Frequency Package Weight Frequency Change MTTF per MIL-HDBK-217, Rev. E Ground Benign Fixed Ground Naval Sheltered Airborne Uninhabited Fighter TEMPERATURE Specification Operation Storage Rated Load to 1mA Load High Line to Low Line Circuit Stress Method TA = +25°C TA = +35°C TA = +35°C TA = +35°C -25 -40 -40 +25 +85 +100 +110 °C °C °C ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation............................................................................1.2W Short Circuit Protection.......................................................................< 1 second Lead Temperature (soldering, 10 seconds max)......................................+300°C ORDERING INFORMATION Device Family HPR Indicates DC/DC Converter Model Number Selected From Table Above RoHS Compliance HPR 2XX C Page 2 HPR2XXCC REV. B (MPS) 12/2008 TYPICAL PERFORMANCE CURVES Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. 400 375 FREQUENCY vx VIN 420 390 Frequency (kHZ) 360 330 FREQUENCY vs Pout High Line CROSS REGULATION HPR205 Channels 2-4: +25mA Load 31.0 30.5 +VOUT (VDC) 30.0 29.5 Channel 2-4 Frequency (kHZ) 350 325 300 Nominal Line Low Line 300 29.0 Channel 1 4.5 4.75 5.0 5.25 5.5 0 .75 1.5 2.25 3.0 0 6 12 18 26 Vin (VDC) LOAD REGULATION 6.6 6.2 VOUT (VDC) 5.8 5.4 5.0 VOUT (VDC) (5 Vout Models) Pout (Watts) LOAD REGULATION 14.0 13.4 VOUT (VDC) 12.8 12.2 11.6 (12 Vout Models) Input Channel 1 (mA) LOAD REGULATION 16.00 15.75 15.50 15.25 15.00 (15 Vout Models) 0 20 40 60 80 0 8 16 24 32 -0 6.25 12.50 18.75 25 Iout (mA sum of all Outputs) REFLECTED RIPPLE CURRENT vs. Pout 50.0 37.5 25.0 12.5 0 Iout (mA sum of all Outputs) EFFICIENCY vs OUTPUT POWER 90.0 67.5 45.0 22.5 0 Change from Nom Vout (%) +15Vout +12Vout Iout (mA sum of all Outputs) LINE REGULATION 12 6 0 -6 -12 Reflected Ripple Current (mA p-p) Efficiency (Pout/Pin) +5Vout 0 0.8 1.7 2.6 3.4 0 .85 1.7 2.6 3.5 -10 -5 0 5 10 Pout (Watts) Pout (Watts) Pout (Watts) USA: Canada: UK: Mansfield (MA), Tel: (508) 339 3000, email: sales@murata-ps.com Toronto, Tel: (866) 740 1232, email: toronto@murata-ps.com Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com ISO 9001 & ISO 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2008 Murata Power Solutions, Inc. France: Japan: China: Germany: München, Tel: +49 (0)89-544334-0, email: ped.munich@murata-ps.com Singapore: Parkway Centre, Tel: +65 6348 9096, email: singapore@murata-ps.com HPR2XXCC REV. B (MPS) 12/2008 Page 3