HPR402C

HPR4XXC 0.75 Watt Miniature SIP DC/DC Converter PRODUCT OVERVIEW The HPR4XXC Series uses advanced circuit design and packaging technology to realize superior reliability and performance. A 170kHz push-pull oscillator is used in the input stage. The HPR4XXC Series reduces beat-frequency oscillation problems when used with high frequency isolation amplifiers. Reduced parts count and high efficiency add to the reliability of the HPR4XXC Series. The high efficiency of the HPR4XXC Series means less internal power dissipation, as low as 190mW. With less heat to dissipate the HPR4XXC Series can operate at higher temperatures with no degradation of reliable operation. In addition, the high efficiency of the HPR4XXC Series means the series is able to offer greater than 10 W/inch3 of output power density. Operation down to no load will not impact the reliability of the series, although this product has a >1mA minimum load for specifications purposes. The HPR4XXC Series provides high isolation in a very small package. The use of surface mounted devices and manufacturing technologies makes it possible to offer premium performance and low cost. FEATURES High Isolation Voltage: 3000 VPK Test Single-In-Line Package (SIP) Internal Input and Output Low Cost Non-Conductive Case High Output Power Density: 10 Watts/Inch3 Extended Temperature Range: -25°C to +85°C High Efficiency to 79% RoHS Compliant SPECIFICATIONS All specifications are typical at TA = +25°C nominal input voltage unless otherwise specified. PRODUCT SELECTION CHART MODEL HPR400C HPR401C HPR402C HPR403C HPR404C HPR405C HPR406C HPR407C HPR408C HPR409C HPR410C HPR411C HPR412C HPR413C HPR414C HPR415C HPR416C HPR417C HPR418C HPR419C HPR420C HPR421C HPR422C HPR423C NOMINAL INPUT VOLTAGE (VDC) 5 5 5 5 5 5 12 12 12 12 12 12 15 15 15 15 15 15 24 24 24 24 24 24 RATED OUTPUT VOLTAGE (VDC) 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 RATED OUTPUT CURRENT (mA) 150 62 50 ±75 ±30 ±25 150 62 50 ±75 ±30 ±25 150 62 50 ±75 ±30 ±25 150 62 50 ±75 ±30 ±25 INPUT CURRENT (mA) REFLECTED RIPPLE NO LOAD RATED LOAD CURRENT (mA) TYP MAX (mAp-p) 20 20 20 20 20 20 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 8 8 216 212 212 218 212 220 90 81 81 88 81 81 72 72 72 72 63 63 48 48 45 45 45 45 235 235 235 245 235 220 100 90 90 98 90 90 80 80 80 80 70 66 53 53 50 50 50 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 15 15 15 15 15 15 EFFICIENCY (%) 69 70 71 68 68 75 69 77 77 71 74 77 69 69 69 69 76 79 65 65 69 69 67 69 Note: Other input to output voltages may be available. Please contact Murata Power Solutions. 　 For full details go to www.murata-ps.com/rohs www.murata-ps.com Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232 HPR4xxC_B01 Page 1 of 4 HPR4XXC.B01 Page 1 of HPR4XXC 0.75 Watt Miniature SIP DC/DC Converter SPECIFICATIONS, ALL MODELS PARAMETER INPUT Voltage Range Specifications are at TA = +25°C nominal input voltage unless otherwise specified. CONDITIONS MIN 4.5 10.8 13.5 21.6 TYP 5 12 15 24 MAX 5.5 13.2 16.5 26.4 750 ±5 200 40 7 15 18 .05 UNITS VDC VDC VDC VDC mW % mVp-p mVrms VDC VDC VDC %/°C % Rated Load, Nominal VIN BW = DC to 10MHz BW =10Hz to 2MHz Voltage (Over Input Voltage Range) 1mA to Rated Current, VOUT = 5V 1mA to Rated Current, VOUT = 12V 1mA to Rated Current, VOUT = 15V Temperature Coefficent REGULATION Load Regulation (All other modes) Rated Load to 1mA Load GENERAL ISOLATION Rated Voltage Test Voltage 60 Hz, 60 Seconds Resistance Capacitance Leakage Current VISO= 240VAC, 60Hz Switching Frequency Frequency Change Over Line and Load Package Weight MTTF per MIL-HDBK-217, Rev. F* Circuit Stress Method Ground Benign TA = +25°C Moisture Sensitivity Level (MSL) IPC/JEDEC J-STD-20 TEMPERATURE Specification Operation Storage OUTPUT OUTPUT Rated Power Voltage Setpoint Accuracy Ripple & Noise 150 30 4.75 11.40 14.25 .01 3 1000 3000 10 25 2 170 24 100 7 GENERAL 3 7.9 2 -25 -40 -40 +25 +85 +100 +110 VDC Vpk GΩ pF μArms kHz % g MHr °C °C °C SOLDERING INFORMATION The HPR4XXC devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering. www.murata-ps.com Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232 HPR4xxC_B01 Page 2 of 4 HPR4XXC.B01 Page 2 of HPR4XXC 0.75 Watt Miniature SIP DC/DC Converter TYPICAL PERFORMANCE CURVES Specifications are at TA = +25°C nominal input voltage and nominal load. VOUT VS LOAD (5Vout Models) 5.7 5.5 Vout Vout 5.3 5.1 4.9 0 40 80 120 160 Output Current (mA) VOUT VS LOAD (±12Vout Models) 12.6 12.5 12.4 Vout 12.3 12.2 12.1 12.0 0 10 20 30 40 Output Current each load (mA) Vout Vout 15.5 15.3 15.1 14.9 0 20 40 60 80 Output Current each load (mA) OSCILLATION FREQUENCY VS TEMPERATURE 220 Frequency (KHz) 200 180 160 140 80 100 -30 0 30 Temperature (°C) 60 90 15.9 15.7 5.4 5.2 Vout 5.0 4.8 12.0 4.6 0 20 40 60 80 Output Current each load (mA) VOUT VS LOAD (15Vout Models) 16.5 16.0 15.5 15.0 14.5 14.0 13.5 0 0.2 0.4 0.6 0.8 1.0 Output Power each load (Watts) 11.9 0 20 40 60 80 Output Current each load (mA) VOUT VS LOAD (±15Vout Models) VOUT VS LOAD (±5Vout Models) 12.5 12.4 12.3 12.2 12.1 VOUT VS LOAD (12Vout Models) EFFICIENCY VS LOAD 90 75 Efficiency (%) 60 45 30 15 0 0 20 40 60 % of Rated Load (%) SAFE OPERATING AREA 600 LOAD CAPACITANCE vs INPUT RISE TIME (5 Vout models) 60 LOAD CAPACITANCE vs INPUT RISE TIME (15 Vout models) 500 50 Total Load Capacitance (uF) Total Load Capacitance (uF) 400 40 300 30 SAFE OPERATING AREA 200 SAFE OPERATING AREA 20 100 10 0 0 5 10 15 20 25 30 35 Rise Time of Input Voltage (mS) 40 45 50 0 0 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) LOAD CAPACITANCE vs INPUT RISE TIME (12 Vout models) 90 NOTES: 1.) When operated within the SAFE OPERATING AREA as defined by the above curves, the output voltage of HPR4XXC devices is guaranteed to be within 95% of its steady-state value within 100 milliseconds after the input voltage has reached 95% of its steadystate value. 2.) For dual output models, total load capacitance is the sum of the capacitances on the plus and minus outputs. Total Load Capacitance (uF) 80 70 60 50 40 30 20 10 0 0 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) SAFE OPERATING AREA www.murata-ps.com Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232 HPR4xxC_B01 Page 3 of 4 HPR4XXC.B01 Page 3 of HPR4XXC 0.75 Watt Miniature SIP DC/DC Converter MECHANICAL 0.77±0.010" (19.56±0.25) FRONT VIEW 0.240±0.010" (6.09±0.25) RIGHT SIDE VIEW 0.397±0.010" (10.16±0.25) 12 0.02±0.002" (0.51±0.05) 567 0.18±0.015" (4.57±0.38) 0.020±0.010" (0.51±0.25) 0.140" MIN (3.56) 0.010±0.002" (0.25±0.05) 0.035±0.015" (0.89±0.38) BOTTOM VIEW PIN CONNECTIONS 1. +VIN 2. -VIN 5. -VOUT 6. COM* 7. +VOUT *Common pin not present on single output models. Notes: All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) PIN PLACEMENT TOLERANCE: ± 0.015” MATERIAL: Lead material is phosphor bronze; lead finish is 100-300 microinches of matte tin over a barrier layer of 5-40 microinches of nickel. ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation ...................................450mW ShortCircuitDuration ............................................Momentary Lead Temperature (soldering, 10 seconds max ...+300°C*) *NOTE: Refer to Reflow Profile for SMD Models. : ORDERING INFORMATION HPR 4XX Device Family HPR Indicates DC/DC Converter Model Number Selected from Table of Electrical Characteristics RoHS Compliant Version C USA: UK: France: Japan: Tucson (Az), Tel: (800) 547 2537, email: sales@murata-ps.com Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com Website: www.murata-ps.jp Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com Canada: Toronto, Tel: (866) 740 1232, email: toronto@murata-ps.com Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com ISO 9001 REGISTERED 03/03/08 Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2008 Murata Power Solutions, Inc. Germany: München, Tel: +49 (0)89-544334-0, email: munich@murata-ps.com China: www.murata-ps.com Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232 HPR4xxC_B01 Page 4 of 4 HPR4XXC.B01 Page 4 of