LQH3NPN220MM0L

LQH3NPN220MM0# “#” indicates a package specification code. < List of part numbers with package codes > LQH3NPN220MM0L , LQH3NPN220MM0K Shape Notes When applied Rated current to the Products, Inductance will be within ±30% of nomonal Inductance value. When applied Rated current to the Products, temperature rise caused by self-generated heat shall be limited to 40℃ max. Keep the temperature (ambient temperature plus self-generation of heat) under 125℃. References Packaging code L size 3.0 ±0.2mm W size 3.0 ±0.2mm T size 1.4 ±0.1mm Size code in inch (mm) 1212 (3030) Specifications Minimum quantity L φ180mm Embossed taping 1000 K φ330mm Embossed taping 4000 Mass (Typ.) 1 piece 0.051g Specifications Inductance 22µH ±20% Inductance test frequency 1MHz Rated current (Isat) (Based on Inductance change) 410mA Rated current (Itemp) (Based on Temperature rise) 650mA Max. of DC resistance 0.612Ω Avg. of DC resistance 0.51Ω±20% Self resonance frequency (min.) 28MHz Operating temperature range (Self-temperature rise is included) -40〜125℃ Operating temperature range (Self-temperature rise is not included) -40〜85℃ Class of magnetic shield Magnetic Resin Series LQH3NPN_M0 1 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. URL : http://www.murata.com/ Last updated: 2017/06/28 Chart of characteristic data (The charts below may show another part number which shares its characteristics.) Inductance-Frequency characteristics (Typ.) Inductance-Current characteristics (Typ.) Temperature rise characteristics (Typ.) 2 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Last updated: 2017/06/28