LQP02HQ1N0B02L

O05E.pdf Apr.28,2017 Chip Inductors (Chip Coils) !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 EU RoHS Compliant F**2&#.0-"3!21',2&'1!2*-%!-+.*7 5'2& -@ F -'1Ÿ2&# 30-.#,'0#!2'4# |z{{G€G -,2&##120'!2'-,-$2&# 1#-$#02',80"-313 12,!#1', *#!20'!*," *#!20-,'! /3'.+#,2@Ÿ FFor+-0#"#2'*1A.*#1#0#$#r2o-ur5#  .%#AŸ302ž1..0-!&$-0 -Ÿ H&22.BGG555@+302@!-+G#,#3G13..-02G!-+.*',!#G0-&1J@ Because of the difference of measurement condition, electrical characteristics plots on this catalog may have some difference to official specification value. O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Product specifications are as of November 2016. Product Guide Inductors for Power Lines Contents Apr.28,2017 p2 Product Detail p8 p10 !Caution/Notice p151 Soldering and Mounting p153 Packaging p158 Inductors for General Circuits Part Numbering p164 Product Detail p165 !Caution/Notice p190 Soldering and Mounting p192 Packaging p196 RF Inductors Part Numbering Inductors for General Circuits Inductors for Power Lines p200 Product Detail p201 !Caution/Notice p292 Soldering and Mounting p294 Packaging p298 TOKO Products Inductors for Power Lines Product Detail p302 !Caution/Notice p415 Soldering and Mounting p416 Packaging p419 TOKO Products Inductors for General Circuits Product Detail p422 !Caution/Notice p427 Soldering and Mounting p428 Packaging p430 Please check the MURATA website (http://www.murata.com/) if you cannot find a part number in this catalog. TOKO Products Inductors for General Circuits Part Numbering TOKO Products Inductors for Power Lines RF Inductors O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Product Guide Inductors for Power Lines Series 2 Structure Size Code in inch (in mm) Inductance Range (H) 0.1n 1n 10n 100n 1μ Rated Current (A) 10μ 100μ 1m 10m 10m 100m 1 LQM18FN_00 p141 0603 (1608) LQM18PN_B0 p52 0603 (1608) LQM18PN_C0 p53 0603 (1608) LQM18PN_D0 p55 0603 (1608) 2.5μH 700mA LQM18PN_DH p56 0603 (1608) 2.2μH 650mA LQM18PN_F0 p58 0603 (1608) LQM18PN_FH p59 0603 (1608) LQM18PN_FR p61 0603 (1608) LQM18PN_GH p63 0603 (1608) 1μH LQM18PW_CH p65 0603 (1608) 1μH LQM21DN_00 p143 0805 (2012) 1μH LQM21FN_00 p145 0805 (2012) 1μH LQM21FN_70 p147 0805 (2012) LQM21FN_80 p149 0805 (2012) LQM21PN_C0 p67 0805 (2012) LQM21PN_CA p69 0805 (2012) LQM21PN_CH p71 0805 (2012) LQM21PN_EH p73 0805 (2012) LQM21PN_G0 p75 0805 (2012) LQM21PN_GC p77 Multilayer Type 0805 (2012) LQM21PN_GH p79 0805 (2012) LQM21PN_GR p81 0805 (2012) 1μH 10 700mA 850mA 1μH 600mA 470nH 2.2μH 220nH 4.7μH 700mA 1.4A 620mA 1.25A 3.3μH 1.05A 2.5μH 750mA 950mA 47μH 7mA 47μH 7mA 60mA 220mA 4.7μH 10μH 100mA 120mA 4.7μH 10μH 100mA 120mA 470nH 2.2μH 600mA 2.2μH 470nH 1.05A 1.6A 2.2μH 470nH 1.1A 3.3μH 1μH 470nH 1.1A 1.05A 2.2μH 240nH 800mA 2.2μH 2.8A 1.3A 800mA 900mA 4.7μH 1A 1μH 4.7μH 800mA 4.7μH 750mA 950mA 0805 (2012) 2.2μH LQM2MPN_DH 0806 (2016) 2.2μH LQM2MPN_EH p104 0806 (2016) LQM2MPN_G0 p106 0806 (2016) LQM2MPN_GH p108 0806 (2016) LQM2HPN_CH p85 1008 (2520) LQM2HPN_E0 p87 1008 (2520) LQM2HPN_EH p88 1008 (2520) LQM2HPN_G0 p90 1008 (2520) LQM2HPN_GC p92 1008 (2520) LQM2HPN_GH p94 1008 (2520) LQM2HPN_GS p96 1008 (2520) LQM2HPN_J0 p98 1008 (2520) LQM2HPN_JH p100 1008 (2520) 470nH LQM31PN_00 p110 1206 (3216) 470nH LQM32PN_G0 p112 1210 (3225) LQM32PN_GC p113 1210 (3225) LQW15CN_00 p115 0402 (1005) 18nH LQW15CN_10 p117 0402 (1005) 20nH LQW18CN_00 p119 0603 (1608) LQH2MCN_02 p14 0806 (2016) 1μH LQH2MCN_52 p16 0806 (2016) 1μH LQH2MPN_GR p18 0806 (2016) LQH2HPN_GR p10 LQH2HPN_JR p12 240nH 470nH 1.1A 4.7μH 160nH 1.3A 2.2μH 850mA 560nH 2.2μH 470nH 1.3A 4.7μH 1μH 240nH 1.1A 4.7μH 800mA 2.2μH 2.2μH 1μH 3.3μH 5A 1A 1.5A 2.2μH 1.5A 4.7μH 700mA 3.2A 1.4A 1.8A 2.2A 200nH 390mA 3.3μH 1.4A 130mA 650nH 2.2A 430mA 82μH 22μH 330nH 470nH 1.8A 1A 1.1A 1μH 470nH 4.5A 1.5A 1.5A 4.7μH 1μH 1008 (2520) 5A 2.55A 1.5A 240nH 1008 (2520) 4.1A 1.1A 1.6A 2.2μH 240nH 2.4A 1.3A 1.27A 2.2μH 4.9nH 100 150mA 600mA 2.2μH p83 Wire Wound Ferrite Core Type 50mA 1.5μH 470nH p102 LQM21PN_GS 10μH 90mA 485mA 130mA 595mA 82μH 210mA 100μH 210mA 22μH 2.6A 2.2A 2.9A 540mA 3.5A DEM2812C p388 1211 (3028) 470nH 12μH 760mA 3.1A DEM2815C p389 1211 (3028) 470nH 15μH 800mA 3.9A DEM2818C p390 1211 (3028) 470nH 12μH LQH3NPN_GR p28 1212 (3030) 470nH LQH3NPN_JR p30 1212 (3030) LQH3NPN_ME p32 1212 (3030) 680nH 1μH 1A 250μH 47μH 100μH 140mA 570mA 430mA 4.7A 2.82A 2.86A 3A Continued on the following page. O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Series Size Code in inch (in mm) Inductance Range (H) 0.1n 1n 10n 100n 1μ p34 1212 (3030) LQH31CN_03 p121 1206 (3216) LQH32CN_23 p123 1210 (3225) LQH32CN_33 p125 1210 (3225) LQH32CN_53 p127 1210 (3225) 1μH LQH32DN_23 p129 1210 (3225) 1μH LQH32DN_53 p131 1210 (3225) 1μH LQH32PB_N0 p20 1210 (3225) 470nH LQH32PB_NC p22 1210 (3225) 470nH LQH32PN_N0 p24 1210 (3225) 470nH 470nH LQH3NPN_MR 1514 (3735) 1514 (3735) LQH44PN_GR p40 1515 (4040) 680nH LQH44PN_J0 p42 1515 (4040) 1μH LQH44PN_P0 p44 1515 (4040) 1μH LQH43CN_03 p133 1812 (4532) 1μH LQH43CN_33 p135 1812 (4532) LQH43PB_26 p36 1812 (4532) LQH43PN_26 p38 3.4A 530mA 22μH 1μH 2.5A 47μH 380mA 2A 800mA 470μH 90mA 240mA 220μH 240mA 3.4A 1A 22μH 1.4A 2020 (5050) 2020 (5050) p394 2020 (5252) 1.2μH 100μH p395 2020 (5252) 1.1μH 100μH p396 2020 (5252) LQH55DN_03 p137 2220 (5750) DG6045C p399 2424 (6060) 1μH 100μH DG6050C p401 2424 (6060) 1.2μH 100μH D63LCB p397 2524 (6362) LQH66SN_03 p139 2525 (6363) DS75LC p402 2929 (7373) 1μH DEM8030C p405 3131 (8080) 1.5μH DEM8040C p406 3131 (8080) 1.5μH DEM8045C p407 3131 (8080) 1.5μH DG8040C p404 3131 (8080) 1μH DEM10050C p408 3939 (100100) 1.5μH DS104C2 p409 4040 (101101) 1.1μH DS106C2 p411 4040 (101101) 1.2μH DS126C2 p413 4949 (125125) DFE201208S p302 0805 (2012) DFE201210S p304 0805 (2012) DFE201210U p340 0805 (2012) DFE201610C p306 0806 (2016) DFE201610E p336 DFE201610P p328 DFE201610R p320 DFE201612C 150μH 7.7A 7A 1.4A 4.7μH 120nH 460mA 50mA 6A 440mA 9.8A 4.52A 50mA 6A 430mA 9.2A 1.3A 33μH 9.5A 1.2A 10mH 47μH 3.87A 2.31A 900mA 150μH 470μH 2.44A 350mA 10mH 270nH 7.7A 260mA 220μH 7.5A 2.4A 47μH 10A 2.1A 100μH 11.2A 1.3A 33μH 10.4A 3.5A 120μH 330μH 1.7μH 3.5A 650mA 22μH 1μH 2.95A 3.4A 22μH 1μH 470nH 2.95A 1.08A 1.6A 220μH p50 470nH 3.4A 410mA 3.9μH 1.2μH 2.5A 47μH 1μH 1818 (4745) 4.4A 880mA 22μH 560nH 4.4A 200mA 22μH LQH5BPN_T0 Wire Wound Metal Alloy Core Type 3.4A 680nH LQH5BPN_38 D53LC 1A 560nH p48 High Current Low Rdc 800mA 100mA 650mA p46 D53LC 60mA 650mA LQH5BPB_T0 D52LC 1A 22μH 1812 (4532) 2020 (5050) 1.45A 100mA 200mA 120μH p392 Wire Wound Ferrite Core Type 560μH 100μH 120μH DEM3518C 800mA 450mA 100μH 22μH DEM3512C 970mA 60mA 10μH 680μH 100 2.15A 80mA 560μH 150nH 10 460mA 100μH 1μH 1210 (3225) p393 10m 100m 1 47μH 120nH p26 DEM4518C Rated Current (A) 10μ 100μ 1m 10m 1μH p391 LQH32PN_NC Inductors for Power Lines Structure Apr.28,2017 15.3A 970mA 11.7A 690mA 12A 580mA 11.8A 470nH 2.2μH 1.8A 4A 470nH 2.2μH 2.1A 4.8A 2.2μH 2A 240nH 560nH 0806 (2016) 240nH 0806 (2016) 240nH 2.2μH 10μH 1.5A 1A 6.5A 2.8A 6.3A 2.2μH 2A 0806 (2016) 470nH 2.2μH 1.6A 3A p308 0806 (2016) 470nH 2.2μH 1.6A 3.4A DFE201612E p338 0806 (2016) DFE201612P p330 0806 (2016) DFE201612R p322 0806 (2016) 470nH DFE252007F p342 1008 (2520) 470nH 330nH 240nH 4.7μH 1.8A 2.2μH 2.1A 2.2μH 1.7A 4.7μH 1.2A 5.4A 6.3A 6.5A 3.5A 3.3A Continued on the following page. 3 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Inductors for General Circuits Inductors for Power Lines Series Structure Size Code in inch (in mm) Inductance Range (H) 0.1n 1n 10n 100n 1μ Apr.28,2017 Rated Current (A) 10μ 100μ 1m 10m 10m 100m 1 10 DFE252008C p310 1008 (2520) DFE252010C p312 1008 (2520) DFE252010F p344 1008 (2520) 330nH DFE252010P p332 1008 (2520) 330nH DFE252010R p324 1008 (2520) DFE252012C p314 1008 (2520) DFE252012F p346 1008 (2520) 330nH DFE252012P p334 1008 (2520) 330nH DFE252012R p326 1008 (2520) DFE322510C p316 1210 (3225) 470nH DFE322512C p318 1210 (3225) 470nH DFE322512F p348 1210 (3225) FDSD0412 p350 1515 (4040) FDSD0415 p352 1515 (4040) FDSD0420 p354 1515 (4040) FDSD0512 p356 2019 (5249) 1μH FDSD0515 p358 2019 (5249) 1μH FDSD0518 p360 FDV0530 p364 FCUL0530 p378 2322 (5857) FCUL0624 p380 2926 (7366) FCUL0630 p382 2926 (7366) 120nH FDUE0640 p369 3026 (7667) 150nH FDUE0650 p370 3026 (7667) FDV0618 p365 2926 (7467) 240nH FDV0620 p366 2926 (7467) 200nH FDVE0630 p367 2926 (7467) 160nH FDSD0630 p362 2726 (7066) FCUL1040 p384 4540 (115100) FCUL1060 p386 4640 (116100) FDUE1040D p371 4440 (112100) FDVE1040 p368 4440 (112100) FDA1055 p375 4242 (108108) 560nH FDUE1245 p372 4848 (123121) 500nH FDA1254 p377 5049 (126125) FDUE1260 p373 5650 (143127) LQB15NN_10 p165 0402 (1005) 220nH 560nH 300mA 380mA LQB18NN_10 p167 0603 (1608) 220nH 560nH 300mA 450mA LQM18NN_00 p183 LQM21NN_10 p185 0805 (2012) LLB2520 p422 1008 (2520) LLM2520 p423 1008 (2520) 100nH LQH31HN_03 p169 1206 (3216) 54nH LQH31MN_03 p171 1206 (3216) LLM3225 p425 LQH32MN_23 p173 LQH44NN_03 p181 LQH43MN_03 p175 1812 (4532) 1μH LQH43NN_03 p178 1812 (4532) 1μH LQW04CA_00 p187 03019 (0805) LQW15CA_00 p188 0402 (1005) Wire Wound Metal Alloy Core Type Multilayer Type Wire Wound Ferrite Core Type 470nH 470nH 1μH 1μH 0603 (1608) 1210 (3225) 1.1A 10μH 1A 10μH 1.3A 1.7A 10μH 1A 10μH 1.4A 5.7A 3A 3.8A 7.6A 4.7μH 2A 4.7μH 1.7A 3.4A 10μH 1A 3.8A 10μH 1.2A 4.7A 6.6A 1.7A 6.7A 4.7μH 2.5A 4.7μH 2.9A 12A 10μH 2.5A 11A 6.8μH 2.3A 330nH 680nH 7.5A 6.1A 3.2A 4.7μH 9A 3.6A 4.7μH 19.6A 16A 18A 360nH 470nH 220nH 7A 2.7A 10μH 110nH 6.8A 1.4A 10μH 220nH 3.5A 4.7μH 470nH 330nH 17A 24A 470nH 15A 680nH 16A 18A 1μH 3.3μH 4.7μH 4.1A 14A 3.5A 16.2A 3.1A 10μH 680nH 180nH 20.7A 5.4A 10μH 17A 34A 420nH 360nH 18A 1μH 1.5μH 6.1A 10μH 8A 5.6μH 9.1A 8μH 15mA 2.2μH 100nH 100mA 47μH 44mA 220μH 880nH 150nH 180mA 100μH 100nH 45mA 1mH 1μH 560μH 510nH 60nH 29.1A 470μH 1.5mH 2.4mH 510nH 2μH 50mA 30mA 4.7μH 1μH 22nH 30A 42A 47nH 1515 (4040) 27.7A 17A 2.2μH 680nH 32A 14.6A 450nH 1210 (3225) 53A 34A 41A 560nH 220nH 32A 22A 33A 420nH 600nH 100 3A 4.7μH 470nH 2019 (5249) 2423 (6258) 4.7μH 19mA 40mA 145mA 40mA 25mA 200mA 130mA 250mA 480mA 570mA 920mA 250mA 600mA 445mA 4.5A 500mA 500mA 620mA 1.3A Continued on the following page. 4 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Series Structure Inductance Range (H) 0.1n 1n LQG15HN_02 p201 0402 (1005) LQG15HS_02 p204 Multilayer Type 0402 (1005) 1nH LQG18HN_00 p208 0603 (1608) 1.2nH p289 LQW21HN_00 RF Inductors Size Code in inch (in mm) Wire Wound Ferrite Core Type 1nH 270nH 0805 (2012) 470nH 01005 (0402) 0.2nH LQP02TN_02 p214 01005 (0402) 0.2nH LQP02TQ_02 p218 01005 (0402) 0.2nH LQP03HQ_02 p221 0201 (0603) LQP03PN_02 p225 0201 (0603) LQP03TG_02 p227 LQP03TN_02 p231 0201 (0603) 0.6nH LQP03TQ_02 p235 0201 (0603) 0.6nH LQP15MN_02 p238 0402 (1005) 1nH LQP18MN_02 p240 0603 (1608) 1.3nH LQW03AW_00 p242 0201 (0603) 1nH LQW04AN_00 p244 03015 (0804) LQW04AN_10 p249 03015 (0804) LQW15AN_00 p250 0402 (1005) 1.5nH LQW15AN_10 p256 0402 (1005) 1.3nH LQW15AN_80 p258 0402 (1005) 1.3nH LQW18AN_00 p265 0603 (1608) 2.2nH LQW18AN_10 p268 0603 (1608) 2.2nH LQW18AN_80 p270 0603 (1608) 2.2nH LQW18AS_00 p275 0603 (1608) LQW2BAN_00 p278 0805 (2015) 3.2nH LQW2BAS_00 p281 0805 (2015) 2.8nH LQW2BHN_03 p283 0805 (2015) 3.3nH LQW2BHN_13 p285 0805 (2015) 2.7nH LQW2UAS_00 p286 1008 (2520) LQW31HN_03 p290 1206 (3216) 56nH 320mA 990mA 80mA 1.1A 900mA 0201 (0603) 0.1nH 120nH 80mA 270nH 850mA 250mA 33nH 1A 60mA 100nH 400mA 50mA 15.5nH 300mA 230mA 33nH 140mA 56nH 900mA 1.8A 180mA 200mA 120nH 110mA 8.4nH 640mA 75nH 1A 1.2A 320mA 470nH 75mA 33nH 550mA 390nH 1.6nH 1.4A 850mA 60mA 13nH 100mA 200nH 820nH 27nH 3.2A 700mA 3.8A 180mA 800mA 160mA 1.32A 900mA 4.7μH 100nH 1.4A 750mA 470nH 12nH 3.15A 850mA 190mA 390nH 8.8nH 1A 120mA 4.7nH 36nH 160mA 90mA 150nH 0.8nH 1.1A 100mA 22nH 2.2nH 75mA 100 1A 350mA 2.2μH 10 1A 110mA 39nH 0.6nH Rated Current (A) 10m 100m 1 150mA 100nH LQP02HQ_02 Wire Wound Non-Magnetic Core Type 10μ 100μ 1m 10m 120nH p210 Film Type 10n 100n 1μ Apr.28,2017 260mA 230mA 1.9A 1A 750mA 5 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MEMO 6 O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. p10 !Caution/Notice p151 Soldering and Mounting p153 Packaging p158 RF Inductors Product Detail p8 TOKO Products Inductors for Power Lines Part Numbering TOKO Products Inductors for General Circuits Inductors for Power Lines Inductors for General Circuits Inductors for Power Lines Apr.28,2017 7 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. o Part Numbering Inductors for Power Lines (Part Number) LQ M 21 P 1 4 5 2 3 N R54 M G 6 0 D 7 8 9 : 1Product ID 6Inductance Product ID LQ Chip Inductors (Chip Coils) 2Structure RF Inductors Inductors for General Circuits Code Structure H Wire Wound Type (Ferrite Core) W M Multilayer Type (Ferrite Core) 3Dimensions (LxW) Code Nominal Dimensions (LxW) Size Code (in inch) TOKO Products Inductors for Power Lines 7Inductance Tolerance 1.0x0.5mm 0402 Code Inductance Tolerance 18 1.6x0.8mm 0603 D ±0.5nH 21 2.0x1.25mm 0805 J ±5% 2M 31 2.0x1.6mm 0806 K ±10% 2H 32 2.5x2.0mm 1008 M ±20% 3N 43 3.0x3.0mm 1212 N ±30% 31 44 3.2x1.6mm 1206 32 3.2x2.5mm 1210 43 4.5x3.2mm 1812 Code Features Series 44 4.0x4.0mm 1515 0 Standard Type LQM/LQH*1 /LQW 5B 5.0x5.0mm 2020 1 Low DC Resistance LQW 55 5.7x5.0mm 2220 2 Standard Type LQH32C/32D 66 6.3x6.3mm 2525 3 Low DC Resistance LQH32C/43CN 5 Low Profile Type LQH2MC/32C/32D 7 Large Current Type 8 Low DC Resistance /Large Current Type Code D F D S Series Applications and Characteristics for Choke (Low-current DC Power Supplies) LQM for Choke (DC Power Supplies) 8Features (Except for LQHppP/LQMppP) for Choke (Magnetically Shielded Type) C LQH/LQW for Choke (Coating Type) P LQM/LQH for Power Line *1 Except for LQH32 Series 8Thickness (LQHppP/LQMppP,*7F 6!#.2$-0LQH43P/LQH5BPN_38) Code Nominal Dimensions (T) B 0.35mm C 0.5mm Code Category D 0.6mm N Standard Type E 0.7mm B W LQM21F for Choke LQH 5Category TOKO Products Inductors for General Circuits Expressed by three-digit alphanumerics. The unit is micro-henry (μH). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. If there is a decimal point, it is expressed by the capital letter "R." In this case, all figures are significant digits. If inductance is less than 0.1μH, the inductance code is expressed by a combination of two figures and the capital letter "N," and the unit of inductance is nano-henry (nH). The capital letter "N" indicates the unit of "nH," and also expresses a decimal point. In this case, all figures are significant digits. For those products whose inductance values are specified using three designated digits, these values may be indicated using the closest two digits instead. 15 4Applications and Characteristics 8 Apr.28,2017 Special Feature Classification F 0.8mm 0 0.85mm G 0.9mm J 1.1mm M 1.4mm N 1.55mm P 1.65mm T 2.0mm Continued on the following page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Inductors for Power Lines Continued from the preceding page. 9Electrode (Except for LQHppP/LQMppP) F#"H J 0## Code 0 2 3 Series Electrode LQM/LQW Sn LQH2MC LF Solder O05E.pdf Apr.28,2017 LQH (Except for LQH2MC) 9Specification Code Specification 0/S Standard Type C Good Bias Current Characteristics Type H/A/E High Spec Type (Low DC Resistance; Good Bias Current Characteristics Type) R Low DC Resistance Type Inductors for General Circuits (LQHppP/LQMppP,*7F 6!#.2$-0LQH43P/LQH5BPN_38) 89Thickness (LQH43P/LQH5BPN_38 Only) 4.0mm max. :Packaging Code K F L E Packaging Embossed Taping (ø330mm Reel) Embossed Taping (ø180mm Reel) Series LQH*1 /LQM21*2 LQH3NP_MR LQH*5/LQM18P/LQM21*2 /LQM31P/LQM32P/LQM2HP/LQM2MP LQH3NP_MR B Bulk LQH2MC/LQM/LQW J Paper Taping (ø330mm Reel) LQM18/LQM21*3 D Paper Taping (ø180mm Reel) LQM18/LQM21*4 /LQW *1 Except for LQH2MC/LQH2HP_G0/LQH3NP/LQH43C *2 LQM21D(22 - 47μH)/LQM21F(4.7 - 47μH) *3 LQM21D(1.0 - 10μH)/LQM21F(1.0 - 2.2μH) *4 LQM21D(1.0 - 10μH)/LQM21F(1.0 - 2.2μH)/LQM21P *5 Except for LQH3NP_MR TOKO Products Inductors for Power Lines 2.6mm 38 RF Inductors Dimensions (T) 26 TOKO Products Inductors for General Circuits Code 9 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQH2HPN_GR Series 1008 (2520) inch (mm) Packaging 2.5±0.2 Minimum Code Packaging L ø180mm Embossed Taping Quantity 3000 2.0±0.2 2.0±0.2 0.9±0.1 Appearance/Dimensions Inductors for General Circuits Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 0.62±0.2 0.62±0.2 (in mm) Rated Value (p: packaging code) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) Operating temp. range Operating temp. range (Self-temp. rise included) (Self-temp. rise not included) Remark LQH2HPNR47MGRp 0.47μH ±20% 1MHz 2900mA 2520mA(Ambient temp.85°C) 0.045Ω±20% 1470mA(Ambient temp.105°C) 120MHz -40 to 125°C -40 to 105°C *1 LQH2HPNR68MGRp 0.68μH ±20% 1MHz 2430mA 2330mA(Ambient temp.85°C) 0.055Ω±20% 1350mA(Ambient temp.105°C) 110MHz -40 to 125°C -40 to 105°C *1 LQH2HPN1R0MGRp 1.0μH ±20% 1MHz 2130mA 2100mA(Ambient temp.85°C) 0.068Ω±20% 1200mA(Ambient temp.105°C) 100MHz -40 to 125°C -40 to 105°C *1 LQH2HPN1R5MGRp 1.5μH ±20% 1MHz 1700mA 1850mA(Ambient temp.85°C) 0.087Ω±20% 1110mA(Ambient temp.105°C) 90MHz -40 to 125°C -40 to 105°C *1 LQH2HPN2R2MGRp 2.2μH ±20% 1MHz 1550mA 1470mA(Ambient temp.85°C) 0.134Ω±20% 850mA(Ambient temp.105°C) 80MHz -40 to 125°C -40 to 105°C *1 LQH2HPN3R3MGRp 3.3μH ±20% 1MHz 1230mA 1100mA(Ambient temp.85°C) 0.225Ω±20% 660mA(Ambient temp.105°C) 70MHz -40 to 125°C -40 to 105°C *1 LQH2HPN4R7MGRp 4.7μH ±20% 1MHz 1090mA 1000mA(Ambient temp.85°C) 0.300Ω±20% 570mA(Ambient temp.105°C) 50MHz -40 to 125°C -40 to 105°C *1 LQH2HPN6R8MGRp 6.8μH ±20% 1MHz 830mA 860mA(Ambient temp.85°C) 0.395Ω±20% 490mA(Ambient temp.105°C) 40MHz -40 to 125°C -40 to 105°C *1 LQH2HPN100MGRp 10μH ±20% 1MHz 700mA 710mA(Ambient temp.85°C) 0.560Ω±20% 430mA(Ambient temp.105°C) 30MHz -40 to 125°C -40 to 105°C *1 LQH2HPN150MGRp 15μH ±20% 1MHz 570mA 560mA(Ambient temp.85°C) 0.925Ω±20% 310mA(Ambient temp.105°C) 20MHz -40 to 125°C -40 to 105°C *1 LQH2HPN220MGRp 22μH ±20% 1MHz 460mA 430mA(Ambient temp.85°C) 1.360Ω±20% 250mA(Ambient temp.105°C) 15MHz -40 to 125°C -40 to 105°C *1 LQH2HPN101MGRp 100μH ±20% 1MHz 210mA 150mA(Ambient temp.85°C) 5MHz -40 to 105°C -40 to 85°C *2 5.9Ω±20% Class of Magnetic Shield: Magnetic Resin For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency *1: When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C (at the rated current under 85°C) or 20°C (at the rated current under 105°C). *2: When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat) under 105°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 20°C. Continued on the following page. 10 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines Temperature Rise Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 11 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQH2HPN_JR Series 1008 (2520) inch (mm) Packaging 2.5±0.2 1.1±0.1 Appearance/Dimensions Inductors for General Circuits Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Packaging L ø180mm Embossed Taping Quantity 2000 2.0±0.2 A 0.65±0.2 Minimum Code B 0.65±0.2 A: 2.75 max. B: 2.25 max. (in mm) Rated Value (p: packaging code) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH2HPNR47NJRp 0.47μH ±30% 1MHz 3500mA 2750mA(Ambient temp.85°C) 1650mA(Ambient temp.105°C) 0.031Ω±20% 190MHz LQH2HPN1R0NJRp 1.0μH ±30% 1MHz 2600mA 2400mA(Ambient temp.85°C) 1440mA(Ambient temp.105°C) 0.048Ω±20% 120MHz LQH2HPN1R2NJRp 1.2μH ±30% 1MHz 2450mA 2070mA(Ambient temp.85°C) 1240mA(Ambient temp.105°C) 0.055Ω±20% 100MHz LQH2HPN1R5NJRp 1.5μH ±30% 1MHz 2200mA 1810mA(Ambient temp.85°C) 1080mA(Ambient temp.105°C) 0.075Ω±20% 95MHz LQH2HPN2R2MJRp 2.2μH ±20% 1MHz 1700mA 1650mA(Ambient temp.85°C) 990mA(Ambient temp.105°C) 0.092Ω±20% 50MHz LQH2HPN3R3MJRp 3.3μH ±20% 1MHz 1450mA 1420mA(Ambient temp.85°C) 850mA(Ambient temp.105°C) 0.13Ω±20% 45MHz LQH2HPN4R7MJRp 4.7μH ±20% 1MHz 1230mA 1290mA(Ambient temp.85°C) 770mA(Ambient temp.105°C) 0.17Ω±20% 40MHz LQH2HPN6R8MJRp 6.8μH ±20% 1MHz 1050mA 1000mA(Ambient temp.85°C) 600mA(Ambient temp.105°C) 0.26Ω±20% 35MHz LQH2HPN100MJRp 10μH ±20% 1MHz 830mA 830mA(Ambient temp.85°C) 490mA(Ambient temp.105°C) 0.38Ω±20% 30MHz LQH2HPN150MJRp 15μH ±20% 1MHz 690mA 710mA(Ambient temp.85°C) 420mA(Ambient temp.105°C) 0.55Ω±20% 20MHz LQH2HPN220MJRp 22μH ±20% 1MHz 530mA 540mA(Ambient temp.85°C) 320mA(Ambient temp.105°C) 0.84Ω±20% 20MHz Operating temp. range (Self-temp. rise included): -40 to 125°C Operating temp. range (Self-temp. rise not included): -40 to 105°C Class of Magnetic Shield: Magnetic Resin For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of intial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max (ambient temperature 85°C). When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 20°C max (ambient temperature 85-105°C). Continued on the following page. 12 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines Temperature Rise Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 13 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQH2MCN_02 Series 0806 (2016) inch (mm) Appearance/Dimensions Packaging 0.90±0.05 Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Inductors for General Circuits Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 100 Quantity 1.6±0.2 2.0±0.2 0.6±0.2 Minimum Code 0.6±0.2 (in mm) Rated Value (p: packaging code) TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQH2MCN1R0M02p 1.0μH ±20% 1MHz 485mA 0.30Ω±30% 100MHz LQH2MCN1R5M02p 1.5μH ±20% 1MHz 445mA 0.40Ω±30% 95MHz LQH2MCN2R2M02p 2.2μH ±20% 1MHz 425mA 0.48Ω±30% 70MHz LQH2MCN3R3M02p 3.3μH ±20% 1MHz 375mA 0.60Ω±30% 65MHz LQH2MCN4R7M02p 4.7μH ±20% 1MHz 300mA 0.8Ω±30% 60MHz LQH2MCN5R6M02p 5.6μH ±20% 1MHz 280mA 0.9Ω±30% 60MHz LQH2MCN6R8M02p 6.8μH ±20% 1MHz 255mA 1.0Ω±30% 55MHz LQH2MCN8R2M02p 8.2μH ±20% 1MHz 235mA 1.1Ω±30% 50MHz LQH2MCN100K02p 10μH ±10% 1MHz 225mA 1.2Ω±30% 48MHz LQH2MCN120K02p 12μH ±10% 1MHz 210mA 1.4Ω±30% 44MHz LQH2MCN150K02p 15μH ±10% 1MHz 200mA 1.6Ω±30% 40MHz LQH2MCN180K02p 18μH ±10% 1MHz 190mA 1.8Ω±30% 35MHz LQH2MCN220K02p 22μH ±10% 1MHz 185mA 2.1Ω±30% 30MHz LQH2MCN270K02p 27μH ±10% 1MHz 180mA 2.5Ω±30% 30MHz LQH2MCN330K02p 33μH ±10% 1MHz 160mA 2.8Ω±30% 28MHz LQH2MCN390K02p 39μH ±10% 1MHz 125mA 4.4Ω±30% 24MHz LQH2MCN470K02p 47μH ±10% 1MHz 120mA 5.1Ω±30% 18MHz LQH2MCN560K02p 56μH ±10% 1MHz 110mA 5.7Ω±30% 17MHz LQH2MCN680K02p 68μH ±10% 1MHz 100mA 6.6Ω±30% 14MHz LQH2MCN820K02p 82μH ±10% 1MHz 90mA 7.5Ω±30% 14MHz TOKO Products Inductors for General Circuits Operating temp. range (Self-temp. rise not included): -40 to 85°C 14 Class of Magnetic Shield: No Shield For reflow soldering only *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±10% of initial inductance value. When rated current is applied to the products, the temperature rise caused by selfgenerated heat shall be limited to 40°C max. Continued on the following page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines Temperature Rise Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 15 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQH2MCN_52 Series 0806 (2016) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 100 Quantity 1.6±0.2 1.0±0.2 2.0±0.2 0.1 min. 0.65±0.05 Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 0.6±0.2 0.6±0.2 (in mm) Rated Value (p: packaging code) Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQH2MCN1R0M52p 1.0μH ±20% 1MHz 595mA 0.25Ω±30% 215MHz LQH2MCN1R5M52p 1.5μH ±20% 1MHz 540mA 0.33Ω±30% 165MHz LQH2MCN2R2M52p 2.2μH ±20% 1MHz 500mA 0.42Ω±30% 125MHz LQH2MCN3R3M52p 3.3μH ±20% 1MHz 360mA 0.74Ω±30% 110MHz LQH2MCN4R7M52p 4.7μH ±20% 1MHz 335mA 0.91Ω±30% 90MHz LQH2MCN6R8M52p 6.8μH ±20% 1MHz 285mA 1.23Ω±30% 65MHz LQH2MCN100M52p 10μH ±20% 1MHz 200mA 2.27Ω±30% 60MHz LQH2MCN120M52p 12μH ±20% 1MHz 170mA 2.4Ω±30% 30MHz LQH2MCN150M52p 15μH ±20% 1MHz 150mA 3.5Ω±30% 30MHz LQH2MCN180M52p 18μH ±20% 1MHz 140mA 4.0Ω±30% 30MHz LQH2MCN220M52p 22μH ±20% 1MHz 130mA 5.5Ω±30% 30MHz Operating temp. range (Self-temp. rise not included): -40 to 85°C Class of Magnetic Shield: No Shield For reflow soldering only *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±10% of initial inductance value. When rated current is applied to the products, the temperature rise caused by selfgenerated heat shall be limited to 40°C max. Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Part Number Continued on the following page. 16 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 17 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQH2MPN_GR Series 0806 (2016) inch (mm) Packaging 2.0±0.1 Minimum Code Packaging L ø180mm Embossed Taping Quantity 3000 0.90±0.05 Appearance/Dimensions Inductors for General Circuits Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1.0±0.2 1.6±0.1 0.65±0.2 0.65±0.2 (in mm) Rated Value (p: packaging code) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH2MPNR33NGRp 0.33μH ±30% 1MHz 2200mA 1130mA(Ambient temp.85°C) 670mA(Ambient temp.105°C) 0.15Ω±20% 130MHz LQH2MPNR47NGRp 0.47μH ±30% 1MHz 1950mA 1060mA(Ambient temp.85°C) 630mA(Ambient temp.105°C) 0.18Ω±20% 120MHz LQH2MPN1R0NGRp 1.0μH ±30% 1MHz 1550mA 900mA(Ambient temp.85°C) 540mA(Ambient temp.105°C) 0.25Ω±20% 100MHz LQH2MPN1R5NGRp 1.5μH ±30% 1MHz 1330mA 790mA(Ambient temp.85°C) 470mA(Ambient temp.105°C) 0.32Ω±20% 60MHz LQH2MPN2R2MGRp 2.2μH ±20% 1MHz 1180mA 680mA(Ambient temp.85°C) 400mA(Ambient temp.105°C) 0.39Ω±20% 50MHz LQH2MPN3R3MGRp 3.3μH ±20% 1MHz 1020mA 640mA(Ambient temp.85°C) 380mA(Ambient temp.105°C) 0.47Ω±20% 45MHz LQH2MPN4R7MGRp 4.7μH ±20% 1MHz 870mA 580mA(Ambient temp.85°C) 340mA(Ambient temp.105°C) 0.60Ω±20% 40MHz LQH2MPN6R8MGRp 6.8μH ±20% 1MHz 730mA 530mA(Ambient temp.85°C) 310mA(Ambient temp.105°C) 0.72Ω±20% 35MHz LQH2MPN100MGRp 10μH ±20% 1MHz 610mA 480mA(Ambient temp.85°C) 280mA(Ambient temp.105°C) 0.88Ω±20% 30MHz LQH2MPN150MGRp 15μH ±20% 1MHz 490mA 340mA(Ambient temp.85°C) 200mA(Ambient temp.105°C) 1.7Ω±20% 25MHz LQH2MPN220MGRp 22μH ±20% 1MHz 410mA 290mA(Ambient temp.85°C) 170mA(Ambient temp.105°C) 2.1Ω±20% 20MHz LQH2MPN330MGRp 33μH ±20% 1MHz 310mA 200mA(Ambient temp.85°C) 120mA(Ambient temp.105°C) 4.3Ω±20% 15MHz LQH2MPN470MGRp 47μH ±20% 1MHz 270mA 180mA(Ambient temp.85°C) 110mA(Ambient temp.105°C) 5.3Ω±20% 10MHz Operating temp. range (Self-temp. rise included): -40 to 125°C Operating temp. range (Self-temp. rise not included): -40 to 105°C Class of Magnetic Shield: Ferrite Core For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max (ambient temperature 85°C). When rated current is applied to the products,the temperature rise caused by self-generated heat shall be limited to 20°C max (ambient temperature 85-105°C). Continued on the following page. 18 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH2MPN680MGRp 68μH ±20% 1MHz 230mA 160mA(Ambient temp.85°C) 100mA(Ambient temp.105°C) 6.7Ω±20% 7MHz LQH2MPN820MGRp 82μH ±20% 1MHz 210mA 150mA(Ambient temp.85°C) 90mA(Ambient temp.105°C) 7.3Ω±20% 5MHz Inductors for Power Lines Continued from the preceding page. Operating temp. range (Self-temp. rise included): -40 to 125°C Operating temp. range (Self-temp. rise not included): -40 to 105°C Class of Magnetic Shield: Ferrite Core For reflow soldering only *Isat: Rated Current based on Inductance change *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max (ambient temperature 85°C). When rated current is applied to the products,the temperature rise caused by self-generated heat shall be limited to 20°C max (ambient temperature 85-105°C). Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) TOKO Products Inductors for Power Lines RF Inductors Inductance-Frequency Characteristics (Typ.) Inductors for General Circuits *Itemp: Rated Current based on Temperature rise 19 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines LQH32PB_N0 Series 1210 (3225) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits A Packaging K ø330mm Embossed Taping 7500 L ø180mm Embossed Taping 2000 Quantity 2.5±0.2 1.55±0.15 2.7±0.2 Minimum Code A 2.5±0.2 3.2±0.3 A: 2.8 max. 0.9±0.3 0.9±0.3 (in mm) Rated Value (p: packaging code) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH32PBR47NN0p 0.47μH ±30% 1MHz 3400mA 2550mA(Ambient temp.85°C) 1600mA(Ambient temp.105°C) 0.030Ω±20% 100MHz LQH32PB1R0NN0p 1.0μH ±30% 1MHz 2300mA 2050mA(Ambient temp.85°C) 1320mA(Ambient temp.105°C) 0.045Ω±20% 100MHz LQH32PB1R5NN0p 1.5μH ±30% 1MHz 1750mA 1750mA(Ambient temp.85°C) 1010mA(Ambient temp.105°C) 0.057Ω±20% 70MHz LQH32PB2R2NN0p 2.2μH ±30% 1MHz 1550mA 1600mA(Ambient temp.85°C) 970mA(Ambient temp.105°C) 0.076Ω±20% 70MHz LQH32PB3R3NN0p 3.3μH ±30% 1MHz 1250mA 1200mA(Ambient temp.85°C) 670mA(Ambient temp.105°C) 0.12Ω±20% 50MHz LQH32PB4R7NN0p 4.7μH ±30% 1MHz 1000mA 1000mA(Ambient temp.85°C) 530mA(Ambient temp.105°C) 0.18Ω±20% 40MHz LQH32PB6R8NN0p 6.8μH ±30% 1MHz 850mA 850mA(Ambient temp.85°C) 510mA(Ambient temp.105°C) 0.24Ω±20% 40MHz LQH32PB100MN0p 10μH ±20% 1MHz 750mA 700mA(Ambient temp.85°C) 380mA(Ambient temp.105°C) 0.38Ω±20% 30MHz LQH32PB150MN0p 15μH ±20% 1MHz 600mA 520mA(Ambient temp.85°C) 320mA(Ambient temp.105°C) 0.57Ω±20% 20MHz LQH32PB220MN0p 22μH ±20% 1MHz 500mA 450mA(Ambient temp.85°C) 240mA(Ambient temp.105°C) 0.81Ω±20% 20MHz LQH32PB330MN0p 33μH ±20% 1MHz 380mA 390mA(Ambient temp.85°C) 190mA(Ambient temp.105°C) 1.15Ω±20% 13MHz LQH32PB470MN0p 47μH ±20% 1MHz 330mA 310mA(Ambient temp.85°C) 140mA(Ambient temp.105°C) 1.78Ω±20% 11MHz LQH32PB680MN0p 68μH ±20% 1MHz 280mA 275mA(Ambient temp.85°C) 120mA(Ambient temp.105°C) 2.28Ω±20% 11MHz LQH32PB101MN0p 100μH ±20% 1MHz 180mA 250mA(Ambient temp.85°C) 110mA(Ambient temp.105°C) 2.70Ω±20% 8MHz Operating temp. range (Self-temp. rise included): -40 to 125°C Operating temp. range (Self-temp. rise not included): -40 to 105°C Class of Magnetic Shield: Magnetic Resin For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. 20 Continued on the following page. O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Part Number LQH32PB121MN0p Inductance 120μH ±20% Inductance Test Frequency 1MHz Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) 170mA 200mA(Ambient temp.85°C) 80mA(Ambient temp.105°C) 4.38Ω±20% 8MHz Operating temp. range (Self-temp. rise included): -40 to 125°C Operating temp. range (Self-temp. rise not included): -40 to 105°C Class of Magnetic Shield: Magnetic Resin Inductors for Power Lines Continued from the preceding page. For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by Inductance-Current Characteristics (Typ.) RF Inductors Inductance-Frequency Characteristics (Typ.) Inductors for General Circuits self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines Temperature Rise Characteristics (Typ.) 21 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines LQH32PB_NC Series 1210 (3225) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits 3.2±0.3 0.9±0.3 Packaging K ø330mm Embossed Taping 7500 L ø180mm Embossed Taping 2000 Quantity 2.5±0.2 1.55±0.15 2.7±0.2 Minimum Code 2.5±0.2 0.9±0.3 (in mm) Rated Value (p: packaging code) TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH32PBR47NNCp 0.47μH ±30% 1MHz 4400mA 2900mA(Ambient temp.85°C) 1490mA(Ambient temp.105°C) 0.024Ω±20% 100MHz LQH32PB1R0NNCp 1.0μH ±30% 1MHz 3000mA 2500mA(Ambient temp.85°C) 1380mA(Ambient temp.105°C) 0.036Ω±20% 100MHz LQH32PB1R5NNCp 1.5μH ±30% 1MHz 2600mA 2100mA(Ambient temp.85°C) 1110mA(Ambient temp.105°C) 0.053Ω±20% 70MHz LQH32PB2R2NNCp 2.2μH ±30% 1MHz 2000mA 1850mA(Ambient temp.85°C) 910mA(Ambient temp.105°C) 0.064Ω±20% 70MHz LQH32PB3R3NNCp 3.3μH ±30% 1MHz 1900mA 1550mA(Ambient temp.85°C) 800mA(Ambient temp.105°C) 0.100Ω±20% 50MHz LQH32PB4R7NNCp 4.7μH ±30% 1MHz 1600mA 1200mA(Ambient temp.85°C) 610mA(Ambient temp.105°C) 0.155Ω±20% 40MHz LQH32PB6R8NNCp 6.8μH ±30% 1MHz 1300mA 1100mA(Ambient temp.85°C) 550mA(Ambient temp.105°C) 0.220Ω±20% 40MHz LQH32PB100MNCp 10μH ±20% 1MHz 1000mA 900mA(Ambient temp.85°C) 450mA(Ambient temp.105°C) 0.295Ω±20% 30MHz LQH32PB150MNCp 15μH ±20% 1MHz 800mA 700mA(Ambient temp.85°C) 330mA(Ambient temp.105°C) 0.475Ω±20% 20MHz LQH32PB220MNCp 22μH ±20% 1MHz 650mA 550mA(Ambient temp.85°C) 270mA(Ambient temp.105°C) 0.685Ω±20% 20MHz TOKO Products Inductors for General Circuits Operating temp. range (Self-temp. rise included): -40 to 125°C 22 Operating temp. range (Self-temp. rise not included): -40 to 105°C Class of Magnetic Shield: Magnetic Resin For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Continued on the following page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines Temperature Rise Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 23 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines LQH32PN_N0 Series 1210 (3225) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits A Packaging K ø330mm Embossed Taping 7500 L ø180mm Embossed Taping 2000 2.5±0.2 1.55±0.15 2.7±0.2 Minimum Code A Quantity 2.5±0.2 3.2±0.3 A: 2.8 max. 0.9±0.3 0.9±0.3 (in mm) Rated Value (p: packaging code) TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH32PNR47NN0p 0.47μH ±30% 1MHz 3400mA 2550mA 0.03Ω±20% 100MHz LQH32PN1R0NN0p 1.0μH ±30% 1MHz 2300mA 2050mA 0.045Ω±20% 100MHz LQH32PN1R5NN0p 1.5μH ±30% 1MHz 1750mA 1750mA 0.057Ω±20% 70MHz LQH32PN2R2NN0p 2.2μH ±30% 1MHz 1550mA 1600mA 0.076Ω±20% 70MHz LQH32PN3R3NN0p 3.3μH ±30% 1MHz 1250mA 1200mA 0.12Ω±20% 50MHz LQH32PN4R7NN0p 4.7μH ±30% 1MHz 1000mA 1000mA 0.18Ω±20% 40MHz LQH32PN6R8NN0p 6.8μH ±30% 1MHz 850mA 850mA 0.24Ω±20% 40MHz LQH32PN100MN0p 10μH ±20% 1MHz 750mA 700mA 0.38Ω±20% 30MHz LQH32PN150MN0p 15μH ±20% 1MHz 600mA 520mA 0.57Ω±20% 20MHz LQH32PN220MN0p 22μH ±20% 1MHz 500mA 450mA 0.81Ω±20% 20MHz LQH32PN330MN0p 33μH ±20% 1MHz 380mA 390mA 1.15Ω±20% 13MHz LQH32PN470MN0p 47μH ±20% 1MHz 330mA 310mA 1.78Ω±20% 11MHz LQH32PN680MN0p 68μH ±20% 1MHz 280mA 275mA 2.28Ω±20% 11MHz LQH32PN101MN0p 100μH ±20% 1MHz 180mA 250mA 2.70Ω±20% 8MHz LQH32PN121MN0p 120μH ±20% 1MHz 170mA 200mA 4.38Ω±20% 8MHz Operating temp. range (Self-temp. rise included): -40 to 125°C Operating temp. range (Self-temp. rise not included): -40 to 85°C Class of Magnetic Shield: Magnetic Resin For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency TOKO Products Inductors for General Circuits When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by 24 self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Continued on the following page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines Temperature Rise Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 25 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines LQH32PN_NC Series 1210 (3225) inch (mm) Appearance/Dimensions Packaging Packaging K ø330mm Embossed Taping 7500 L ø180mm Embossed Taping 2000 2.5±0.2 Inductors for General Circuits 1.55±0.15 2.7±0.2 3.2±0.3 0.9±0.3 Minimum Code Quantity 2.5±0.2 0.9±0.3 (in mm) Rated Value (p: packaging code) TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH32PNR47NNCp 0.47μH ±30% 1MHz 4400mA 2900mA 0.024Ω±20% 100MHz LQH32PN1R0NNCp 1.0μH ±30% 1MHz 3000mA 2500mA 0.036Ω±20% 100MHz LQH32PN1R5NNCp 1.5μH ±30% 1MHz 2600mA 2100mA 0.053Ω±20% 70MHz LQH32PN2R2NNCp 2.2μH ±30% 1MHz 2000mA 1850mA 0.064Ω±20% 70MHz LQH32PN3R3NNCp 3.3μH ±30% 1MHz 1900mA 1550mA 0.100Ω±20% 50MHz LQH32PN4R7NNCp 4.7μH ±30% 1MHz 1600mA 1200mA 0.155Ω±20% 40MHz LQH32PN6R8NNCp 6.8μH ±30% 1MHz 1300mA 1100mA 0.220Ω±20% 40MHz LQH32PN100MNCp 10μH ±20% 1MHz 1000mA 900mA 0.295Ω±20% 30MHz LQH32PN150MNCp 15μH ±20% 1MHz 800mA 700mA 0.475Ω±20% 20MHz LQH32PN220MNCp 22μH ±20% 1MHz 650mA 550mA 0.685Ω±20% 20MHz Operating temp. range (Self-temp. rise included): -40 to 125°C Operating temp. range (Self-temp. rise not included): -40 to 85°C Class of Magnetic Shield: Magnetic Resin For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) 26 Continued on the following page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 27 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines LQH3NPN_GR Series 1212 (3030) inch (mm) Appearance/Dimensions Packaging 3.0±0.1 Minimum Code Packaging L ø180mm Embossed Taping Quantity 1R0 3.0±0.1 Inductors for General Circuits 0.9±0.1 3000 0.9±0.2 0.9±0.2 (in mm) Rated Value (p: packaging code) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) Operating temp. range Operating temp. range (Self-temp. rise included) (Self-temp. rise not included) Remark LQH3NPNR47NGRp 0.47μH ±30% 1MHz 2820mA 2540mA(Ambient temp.85°C) 0.047Ω±20% 1520mA(Ambient temp.105°C) 180MHz -40 to 125°C -40 to 105°C *1 LQH3NPN1R0MGRp 1.0μH ±20% 1MHz 1700mA 2080mA(Ambient temp.85°C) 0.062Ω±20% 1240mA(Ambient temp.105°C) 100MHz -40 to 125°C -40 to 105°C *1 LQH3NPN1R5MGRp 1.5μH ±20% 1MHz 1400mA 2040mA(Ambient temp.85°C) 0.074Ω±20% 1220mA(Ambient temp.105°C) 80MHz -40 to 125°C -40 to 105°C *1 LQH3NPN2R2MGRp 2.2μH ±20% 1MHz 1180mA 1730mA(Ambient temp.85°C) 0.087Ω±20% 1030mA(Ambient temp.105°C) 50MHz -40 to 125°C -40 to 105°C *1 LQH3NPN3R3MGRp 3.3μH ±20% 1MHz 1050mA 1580mA(Ambient temp.85°C) 940mA(Ambient temp.105°C) 0.12Ω±20% 30MHz -40 to 125°C -40 to 105°C *1 LQH3NPN4R7MGRp 4.7μH ±20% 1MHz 850mA 1520mA(Ambient temp.85°C) 910mA(Ambient temp.105°C) 0.14Ω±20% 27MHz -40 to 125°C -40 to 105°C *1 LQH3NPN6R8MGRp 6.8μH ±20% 1MHz 720mA 1140mA(Ambient temp.85°C) 680mA(Ambient temp.105°C) 0.23Ω±20% 25MHz -40 to 125°C -40 to 105°C *1 LQH3NPN100MGRp 10μH ±20% 1MHz 570mA 1120mA(Ambient temp.85°C) 670mA(Ambient temp.105°C) 0.28Ω±20% 20MHz -40 to 125°C -40 to 105°C *1 LQH3NPN150MGRp 15μH ±20% 1MHz 480mA 900mA(Ambient temp.85°C) 540mA(Ambient temp.105°C) 0.39Ω±20% 15MHz -40 to 125°C -40 to 105°C *1 LQH3NPN220MGRp 22μH ±20% 1MHz 390mA 750mA(Ambient temp.85°C) 450mA(Ambient temp.105°C) 0.53Ω±20% 10MHz -40 to 125°C -40 to 105°C *1 LQH3NPN330MGRp 33μH ±20% 1MHz 320mA 600mA(Ambient temp.85°C) 360mA(Ambient temp.105°C) 0.86Ω±20% 8MHz -40 to 125°C -40 to 105°C *1 LQH3NPN470MGRp 47μH ±20% 1MHz 260mA 460mA(Ambient temp.85°C) 270mA(Ambient temp.105°C) 1.4Ω±20% 5MHz -40 to 125°C -40 to 105°C *1 LQH3NPN680MGRp 68μH ±20% 1MHz 220mA 280mA(Ambient temp.85°C) 2.1Ω±20% 6MHz -40 to 105°C -40 to 85°C *2 LQH3NPN101MGRp 100μH ±20% 1MHz 190mA 220mA(Ambient temp.85°C) 3.2Ω±20% 5MHz -40 to 105°C -40 to 85°C *2 LQH3NPN151MGRp 150μH ±20% 1MHz 160mA 180mA(Ambient temp.85°C) 4.9Ω±20% 3MHz -40 to 105°C -40 to 85°C *2 Class of Magnetic Shield: Magnetic Resin For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency *1: When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C (at the rated current under 85°C) or 20°C (at the rated current under 105°C). *2: When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat) under 105°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 20°C. 28 Continued on the following page. O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) Operating temp. range Operating temp. range (Self-temp. rise included) (Self-temp. rise not included) Remark LQH3NPN181MGRp 180μH ±20% 1MHz 130mA 160mA(Ambient temp.85°C) 6.4Ω±20% 2MHz -40 to 105°C -40 to 85°C *2 LQH3NPN221MGRp 220μH ±20% 1MHz 120mA 150mA(Ambient temp.85°C) 7.5Ω±20% 2MHz -40 to 105°C -40 to 85°C *2 LQH3NPN251MGRp 250μH ±20% 1MHz 110mA 140mA(Ambient temp.85°C) 8Ω±20% 2MHz -40 to 105°C -40 to 85°C *2 Class of Magnetic Shield: Magnetic Resin Inductors for Power Lines Continued from the preceding page. For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency *1: When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat) rated current under 105°C). *2: When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat) under 105°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 20°C. Inductance-Current Characteristics (Typ.) RF Inductors Inductance-Frequency Characteristics (Typ.) Inductors for General Circuits under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C (at the rated current under 85°C) or 20°C (at the TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines Temperature Rise Characteristics (Typ.) 29 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines LQH3NPN_JR Series 1212 (3030) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits Packaging L ø180mm Embossed Taping Quantity 2000 1.1±0.1 1R0 3.0±0.2 Minimum Code 3.0±0.2 3.0±0.2 0.9±0.2 0.9±0.2 (in mm) Rated Value (p: packaging code) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH3NPNR68NJRp 0.68μH ±30% 1MHz 2700mA 2860mA(Ambient temp.85°C) 1280mA(Ambient temp.105°C) 0.032Ω±20% 130MHz LQH3NPN1R0MJRp 1.0μH ±20% 1MHz 2250mA 2780mA(Ambient temp.85°C) 1230mA(Ambient temp.105°C) 0.040Ω±20% 100MHz LQH3NPN1R5MJRp 1.5μH ±20% 1MHz 1950mA 2510mA(Ambient temp.85°C) 1100mA(Ambient temp.105°C) 0.049Ω±20% 60MHz LQH3NPN2R2MJRp 2.2μH ±20% 1MHz 1800mA 2200mA(Ambient temp.85°C) 980mA(Ambient temp.105°C) 0.068Ω±20% 45MHz LQH3NPN3R3MJRp 3.3μH ±20% 1MHz 1350mA 1700mA(Ambient temp.85°C) 750mA(Ambient temp.105°C) 0.095Ω±20% 45MHz LQH3NPN4R7MJRp 4.7μH ±20% 1MHz 1180mA 1580mA(Ambient temp.85°C) 710mA(Ambient temp.105°C) 0.12Ω±20% 40MHz LQH3NPN6R8MJRp 6.8μH ±20% 1MHz 970mA 1360mA(Ambient temp.85°C) 610mA(Ambient temp.105°C) 0.18Ω±20% 35MHz LQH3NPN100MJRp 10μH ±20% 1MHz 810mA 1200mA(Ambient temp.85°C) 530mA(Ambient temp.105°C) 0.24Ω±20% 30MHz LQH3NPN150MJRp 15μH ±20% 1MHz 650mA 870mA(Ambient temp.85°C) 370mA(Ambient temp.105°C) 0.38Ω±20% 25MHz LQH3NPN220MJRp 22μH ±20% 1MHz 520mA 800mA(Ambient temp.85°C) 350mA(Ambient temp.105°C) 0.50Ω±20% 20MHz LQH3NPN330MJRp 33μH ±20% 1MHz 420mA 630mA(Ambient temp.85°C) 280mA(Ambient temp.105°C) 0.79Ω±20% 15MHz LQH3NPN470MJRp 47μH ±20% 1MHz 360mA 570mA(Ambient temp.85°C) 240mA(Ambient temp.105°C) 1.0Ω±20% 10MHz Operating temp. range (Self-temp. rise included): -40 to 125°C Operating temp. range (Self-temp. rise not included): -40 to 105°C Class of Magnetic Shield: Magnetic Resin For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max (ambient temperature 85°C). When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 20°C max (ambient temperature 85°C to 105°C). Continued on the following page. 30 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines Temperature Rise Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 31 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines LQH3NPN_ME Series 1212 (3030) inch (mm) Appearance/Dimensions Packaging L ø180mm Embossed Taping Quantity 2000 3.0±0.2 Inductors for General Circuits Packaging 1.4±0.1 1R0 3.0±0.2 Minimum Code 0.8±0.3 0.8±0.3 (in mm) Rated Value (p: packaging code) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH3NPN1R0MMEp 1.0μH ±20% 1MHz 2350mA 3000mA(Ambient temp.85°C) 1600mA(Ambient temp.105°C) 0.025Ω±20% 100MHz LQH3NPN2R2MMEp 2.2μH ±20% 1MHz 1800mA 2100mA(Ambient temp.85°C) 1220mA(Ambient temp.105°C) 0.065Ω±20% 60MHz LQH3NPN3R3MMEp 3.3μH ±20% 1MHz 1520mA 1900mA(Ambient temp.85°C) 1150mA(Ambient temp.105°C) 0.084Ω±20% 55MHz LQH3NPN4R7MMEp 4.7μH ±20% 1MHz 1300mA 1700mA(Ambient temp.85°C) 1000mA(Ambient temp.105°C) 0.1Ω±20% 40MHz LQH3NPN6R8MMEp 6.8μH ±20% 1MHz 1040mA 1450mA(Ambient temp.85°C) 900mA(Ambient temp.105°C) 0.14Ω±20% 30MHz LQH3NPN100MMEp 10μH ±20% 1MHz 810mA 1280mA(Ambient temp.85°C) 800mA(Ambient temp.105°C) 0.19Ω±20% 20MHz LQH3NPN150MMEp 15μH ±20% 1MHz 660mA 1020mA(Ambient temp.85°C) 620mA(Ambient temp.105°C) 0.29Ω±20% 15MHz LQH3NPN220MMEp 22μH ±20% 1MHz 570mA 860mA(Ambient temp.85°C) 540mA(Ambient temp.105°C) 0.4Ω±20% 10MHz LQH3NPN330MMEp 33μH ±20% 1MHz 440mA 760mA(Ambient temp.85°C) 460mA(Ambient temp.105°C) 0.55Ω±20% 8MHz LQH3NPN470MMEp 47μH ±20% 1MHz 380mA 610mA(Ambient temp.85°C) 380mA(Ambient temp.105°C) 0.82Ω±20% 5MHz LQH3NPN101MMEp 100μH ±20% 1MHz 260mA 430mA(Ambient temp.85°C) 270mA(Ambient temp.105°C) 1.59Ω±20% 3MHz Operating temp. range (Self-temp. rise included): -40 to 125°C Operating temp. range (Self-temp. rise not included): -40 to 105°C Class of Magnetic Shield: Magnetic Resin For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max (ambient temperature 85°C). When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 20°C max (ambient temperature 85°C to 105°C). Continued on the following page. 32 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines Temperature Rise Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 33 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines LQH3NPN_MR Series 1212 (3030) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits 3.0±0.2 Minimum Code Packaging E ø180mm Embossed Taping 2000 F ø330mm Embossed Taping 8000 1.40±0.1 Polarity Marking Quantity 3.0±0.2 3.0±0.2 1.0±0.2 1.0±0.2 (in mm) Rated Value (p: packaging code) RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH3NPN1R0MMRp 1.0μH ±20% 1MHz 1600mA 2150mA 0.042Ω±20% 135MHz LQH3NPN2R2MMRp 2.2μH ±20% 1MHz 1380mA 1750mA 0.068Ω±20% 75MHz LQH3NPN3R3MMRp 3.3μH ±20% 1MHz 1200mA 1550mA 0.088Ω±20% 70MHz LQH3NPN4R7MMRp 4.7μH ±20% 1MHz 950mA 1400mA 0.105Ω±20% 57MHz LQH3NPN6R8MMRp 6.8μH ±20% 1MHz 830mA 1250mA 0.155Ω±20% 40MHz LQH3NPN100MMRp 10μH ±20% 1MHz 590mA 1150mA 0.210Ω±20% 30MHz LQH3NPN220MMRp 22μH ±20% 1MHz 430mA 750mA 0.480Ω±20% 20MHz LQH3NPN330MMRp 33μH ±20% 1MHz 380mA 600mA 0.790Ω±20% 15MHz LQH3NPN470MMRp 47μH ±20% 1MHz 320mA 460mA 1.140Ω±20% 10MHz TOKO Products Inductors for Power Lines Operating temp. range (Self-temp. rise included): -40 to 125°C Operating temp. range (Self-temp. rise not included): -40 to 85°C Class of Magnetic Shield: Magnetic Resin For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) Continued on the following page. 34 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 35 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines LQH43PB_26 Series 1812 (4532) inch (mm) Appearance/Dimensions Packaging 3.2±0.2 Inductors for General Circuits 2.6±0.2 3.6±0.2 Packaging K ø330mm Embossed Taping 2500 L ø180mm Embossed Taping 500 Quantity 3.2±0.2 4.5±0.3 1.0min. Minimum Code 1.0min. (in mm) Rated Value (p: packaging code) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH43PB1R0N26p 1.0μH ±30% 1MHz 3400mA 3300mA(Ambient temp.85°C) 1410mA(Ambient temp.105°C) 0.026Ω±20% 100MHz LQH43PB2R2M26p 2.2μH ±20% 1MHz 2300mA 2500mA(Ambient temp.85°C) 1120mA(Ambient temp.105°C) 0.042Ω±20% 45MHz LQH43PB3R3M26p 3.3μH ±20% 1MHz 1800mA 2100mA(Ambient temp.85°C) 1000mA(Ambient temp.105°C) 0.052Ω±20% 40MHz LQH43PB4R7M26p 4.7μH ±20% 1MHz 1400mA 1600mA(Ambient temp.85°C) 780mA(Ambient temp.105°C) 0.075Ω±20% 35MHz LQH43PB6R8M26p 6.8μH ±20% 1MHz 1200mA 1400mA(Ambient temp.85°C) 760mA(Ambient temp.105°C) 0.098Ω±20% 30MHz LQH43PB8R2M26p 8.2μH ±20% 1MHz 1100mA 1300mA(Ambient temp.85°C) 670mA(Ambient temp.105°C) 0.128Ω±20% 25MHz LQH43PB100M26p 10μH ±20% 1MHz 1050mA 1170mA(Ambient temp.85°C) 620mA(Ambient temp.105°C) 0.147Ω±20% 20MHz LQH43PB220M26p 22μH ±20% 1MHz 700mA 780mA(Ambient temp.85°C) 400mA(Ambient temp.105°C) 0.327Ω±20% 15MHz LQH43PB470M26p 47μH ±20% 1MHz 470mA 520mA(Ambient temp.85°C) 280mA(Ambient temp.105°C) 0.718Ω±20% 8MHz LQH43PB101M26p 100μH ±20% 1MHz 320mA 320mA(Ambient temp.85°C) 180mA(Ambient temp.105°C) 1.538Ω±20% 4MHz LQH43PB151M26p 150μH ±20% 1MHz 280mA 260mA(Ambient temp.85°C) 140mA(Ambient temp.105°C) 2.362Ω±20% 3MHz LQH43PB221M26p 220μH ±20% 1MHz 220mA 240mA(Ambient temp.85°C) 130mA(Ambient temp.105°C) 2.900Ω±20% 2MHz Operating temp. range (Self-temp. rise included): -40 to 125°C Operating temp. range (Self-temp. rise not included): -40 to 105°C Class of Magnetic Shield: Magnetic Resin For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Continued on the following page. 36 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines Temperature Rise Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 37 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines LQH43PN_26 Series 1812 (4532) inch (mm) Appearance/Dimensions Packaging 3.2±0.2 Packaging K ø330mm Embossed Taping 2500 L ø180mm Embossed Taping 500 Inductors for General Circuits Quantity 3.2±0.2 4.5±0.3 1.0min. Minimum Code 2.6±0.2 3.6±0.2 1.0min. (in mm) Rated Value (p: packaging code) TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH43PN1R0N26p 1.0μH ±30% 1MHz 3400mA 3300mA 0.026Ω±20% 100MHz LQH43PN2R2M26p 2.2μH ±20% 1MHz 2300mA 2500mA 0.042Ω±20% 45MHz LQH43PN3R3M26p 3.3μH ±20% 1MHz 1800mA 2100mA 0.052Ω±20% 40MHz LQH43PN4R7M26p 4.7μH ±20% 1MHz 1400mA 1600mA 0.075Ω±20% 35MHz LQH43PN6R8M26p 6.8μH ±20% 1MHz 1200mA 1400mA 0.098Ω±20% 30MHz LQH43PN8R2M26p 8.2μH ±20% 1MHz 1100mA 1300mA 0.128Ω±20% 25MHz LQH43PN100M26p 10μH ±20% 1MHz 1050mA 1170mA 0.147Ω±20% 20MHz LQH43PN220M26p 22μH ±20% 1MHz 700mA 780mA 0.327Ω±20% 15MHz LQH43PN470M26p 47μH ±20% 1MHz 470mA 520mA 0.718Ω±20% 8MHz LQH43PN101M26p 100μH ±20% 1MHz 320mA 320mA 1.538Ω±20% 4MHz LQH43PN151M26p 150μH ±20% 1MHz 280mA 260mA 2.362Ω±20% 3MHz LQH43PN221M26p 220μH ±20% 1MHz 220mA 240mA 2.900Ω±20% 2MHz Operating temp. range (Self-temp. rise not included): -40 to 85°C Class of Magnetic Shield: Magnetic Resin *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, self-temperature rise shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) 38 Continued on the following page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 39 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQH44PN_GR Series 1515 (4040) inch (mm) Packaging 0.9±0.1 Appearance/Dimensions Inductors for General Circuits Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Minimum Code Packaging K ø330mm Embossed Taping 4500 L ø180mm Embossed Taping 1000 Quantity 4.0±0.1 4.0±0.1 1.1±0.2 1.1±0.2 (in mm) Rated Value (p: packaging code) TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH44PNR68NGRp 0.68μH ±30% 1MHz 2400mA 2500mA(Ambient temp.85°C) 1500mA(Ambient temp.105°C) 0.043Ω±20% 54MHz LQH44PN2R2NGRp 2.2μH ±30% 1MHz 1600mA 2000mA(Ambient temp.85°C) 1200mA(Ambient temp.105°C) 0.074Ω±20% 45MHz LQH44PN3R3NGRp 3.3μH ±30% 1MHz 1500mA 1700mA(Ambient temp.85°C) 1000mA(Ambient temp.105°C) 0.11Ω±20% 25MHz LQH44PN4R7MGRp 4.7μH ±20% 1MHz 1200mA 1600mA(Ambient temp.85°C) 960mA(Ambient temp.105°C) 0.13Ω±20% 17MHz LQH44PN6R8MGRp 6.8μH ±20% 1MHz 850mA 1400mA(Ambient temp.85°C) 840mA(Ambient temp.105°C) 0.17Ω±20% 15MHz LQH44PN100MGRp 10μH ±20% 1MHz 800mA 1100mA(Ambient temp.85°C) 660mA(Ambient temp.105°C) 0.27Ω±20% 13MHz LQH44PN150MGRp 15μH ±20% 1MHz 640mA 900mA(Ambient temp.85°C) 540mA(Ambient temp.105°C) 0.42Ω±20% 10MHz LQH44PN220MGRp 22μH ±20% 1MHz 500mA 750mA(Ambient temp.85°C) 450mA(Ambient temp.105°C) 0.57Ω±20% 8MHz LQH44PN330MGRp 33μH ±20% 1MHz 400mA 480mA(Ambient temp.85°C) 280mA(Ambient temp.105°C) 1.4Ω±20% 6MHz LQH44PN470MGRp 47μH ±20% 1MHz 360mA 410mA(Ambient temp.85°C) 240mA(Ambient temp.105°C) 1.7Ω±20% 6MHz TOKO Products Inductors for General Circuits Operating temp. range (Self-temp. rise included): -40 to 125°C 40 Operating temp. range (Self-temp. rise not included): -40 to 105°C Class of Magnetic Shield: Magnetic Resin For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of intial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max (ambient temperature 85°C). When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 20°C max (ambient temperature 85-105°C). Continued on the following page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines Temperature Rise Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 41 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQH44PN_J0 Series 1515 (4040) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits Minimum Code Packaging K ø330mm Embossed Taping 4500 L ø180mm Embossed Taping 1000 (0.12) 1.1±0.1 Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Quantity 1.1±0.2 0.4 (typ.) 1.5 (typ.) 4.0±0.2 4.0±0.2 1.1±0.2 (in mm) Rated Value (p: packaging code) TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH44PN1R0NJ0p 1.0μH ±30% 100kHz 2000mA 1530mA 0.048Ω±20% 130MHz LQH44PN1R5MJ0p 1.5μH ±20% 100kHz 1600mA 1380mA 0.061Ω±20% 90MHz LQH44PN2R2MJ0p 2.2μH ±20% 100kHz 1320mA 1230mA 0.074Ω±20% 68MHz LQH44PN3R3MJ0p 3.3μH ±20% 100kHz 900mA 1000mA 0.088Ω±20% 55MHz LQH44PN4R7MJ0p 4.7μH ±20% 100kHz 840mA 980mA 0.117Ω±20% 50MHz LQH44PN6R8MJ0p 6.8μH ±20% 100kHz 720mA 860mA 0.143Ω±20% 38MHz LQH44PN100MJ0p 10μH ±20% 100kHz 560mA 790mA 0.207Ω±20% 30MHz LQH44PN150MJ0p 15μH ±20% 100kHz 430mA 610mA 0.385Ω±20% 25MHz LQH44PN220MJ0p 22μH ±20% 100kHz 400mA 550mA 0.480Ω±20% 18MHz LQH44PN330MJ0p 33μH ±20% 100kHz 360mA 430mA 0.740Ω±20% 15MHz LQH44PN470MJ0p 47μH ±20% 100kHz 300mA 380mA 1.014Ω±20% 13MHz Operating temp. range (Self-temp. rise included): -40 to 125°C Operating temp. range (Self-temp. rise not included): -40 to 85°C Class of Magnetic Shield: Magnetic Resin For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, self-temperature rise shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. TOKO Products Inductors for General Circuits Continued on the following page. 42 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines Temperature Rise Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 43 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQH44PN_P0 Series 1515 (4040) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits 1.65±0.15 Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Minimum Code Packaging K ø330mm Embossed Taping 3500 L ø180mm Embossed Taping 1000 Quantity 4.0±0.2 4.0±0.2 1.2±0.2 1.2±0.2 (in mm) Rated Value (p: packaging code) RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH44PN1R0NP0p 1.0μH ±30% 1MHz 2950mA 2450mA 0.030Ω±20% 90MHz LQH44PN2R2MP0p 2.2μH ±20% 1MHz 2500mA 1800mA 0.049Ω±20% 70MHz LQH44PN3R3MP0p 3.3μH ±20% 1MHz 2100mA 1770mA 0.065Ω±20% 50MHz LQH44PN4R7MP0p 4.7μH ±20% 1MHz 1700mA 1700mA 0.080Ω±20% 40MHz LQH44PN6R8MP0p 6.8μH ±20% 1MHz 1400mA 1340mA 0.12Ω±20% 35MHz LQH44PN100MP0p 10μH ±20% 1MHz 1150mA 1170mA 0.16Ω±20% 25MHz LQH44PN220MP0p 22μH ±20% 1MHz 800mA 790mA 0.37Ω±20% 17MHz Operating temp. range (Self-temp. rise included): -40 to 125°C Operating temp. range (Self-temp. rise not included): -40 to 85°C For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, self-temperature rise shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines Class of Magnetic Shield: Magnetic Resin Continued on the following page. 44 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 45 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQH5BPB_T0 Series 2020 (5050) inch (mm) 2.0±0.2 Appearance/Dimensions Packaging Minimum Code Packaging K ø330mm Embossed Taping 3000 L ø180mm Embossed Taping 500 5.0±0.2 Quantity (0.2) Inductors for General Circuits Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 5.0±0.2 5.0±0.2 1.5±0.2 1.5±0.2 (in mm) Rated Value (p: packaging code) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH5BPBR47NT0p 0.47μH ±30% 100kHz 7.7A 4.0A(Ambient temp.85°C) 2.05A(Ambient temp.105°C) 0.012Ω±20% 220MHz LQH5BPB1R0NT0p 1.0μH ±30% 100kHz 5.8A 3.1A(Ambient temp.85°C) 1.68A(Ambient temp.105°C) 0.019Ω±20% 90MHz LQH5BPB1R2NT0p 1.2μH ±30% 100kHz 5.4A 3.1A(Ambient temp.85°C) 1.68A(Ambient temp.105°C) 0.019Ω±20% 90MHz LQH5BPB1R5NT0p 1.5μH ±30% 100kHz 5.0A 3.0A(Ambient temp.85°C) 1.63A(Ambient temp.105°C) 0.024Ω±20% 70MHz LQH5BPB2R2NT0p 2.2μH ±30% 100kHz 4.0A 2.6A(Ambient temp.85°C) 1.37A(Ambient temp.105°C) 0.030Ω±20% 55MHz LQH5BPB2R7NT0p 2.7μH ±30% 100kHz 3.8A 2.5A(Ambient temp.85°C) 1.23A(Ambient temp.105°C) 0.035Ω±20% 50MHz LQH5BPB3R3NT0p 3.3μH ±30% 100kHz 3.5A 2.3A(Ambient temp.85°C) 1.21A(Ambient temp.105°C) 0.044Ω±20% 40MHz LQH5BPB4R7NT0p 4.7μH ±30% 100kHz 3.0A 2.0A(Ambient temp.85°C) 1.09A(Ambient temp.105°C) 0.058Ω±20% 40MHz LQH5BPB6R8NT0p 6.8μH ±30% 100kHz 2.5A 1.65A(Ambient temp.85°C) 0.96A(Ambient temp.105°C) 0.083Ω±20% 30MHz LQH5BPB100MT0p 10μH ±20% 100kHz 2.0A 1.6A(Ambient temp.85°C) 0.87A(Ambient temp.105°C) 0.106Ω±20% 25MHz LQH5BPB150MT0p 15μH ±20% 100kHz 1.6A 1.20A(Ambient temp.85°C) 0.62A(Ambient temp.105°C) 0.187Ω±20% 18MHz LQH5BPB220MT0p 22μH ±20% 100kHz 1.4A 1.05A(Ambient temp.85°C) 0.55A(Ambient temp.105°C) 0.259Ω±20% 15MHz Operating temp. range (Self-temp. rise included): -40 to 125°C Operating temp. range (Self-temp. rise not included): -40 to 105°C Class of Magnetic Shield: Magnetic Resin For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, self-temperature rise shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Continued on the following page. 46 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines Temperature Rise Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 47 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQH5BPN_38 Series 2020 (5050) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits Minimum Code Packaging K ø330mm Embossed Taping 1500 L ø180mm Embossed Taping 400 4.0 max. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Quantity 4.9±0.2 4.9±0.2 1.5±0.2 1.5±0.2 (in mm) Rated Value (p: packaging code) TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH5BPN1R0N38p 1.0μH ±30% 100kHz 7000mA 4600mA 0.012Ω±20% 54MHz LQH5BPN1R5N38p 1.5μH ±30% 100kHz 6500mA 4500mA 0.014Ω±20% 50MHz LQH5BPN2R2N38p 2.2μH ±30% 100kHz 5000mA 4300mA 0.016Ω±20% 45MHz LQH5BPN3R3N38p 3.3μH ±30% 100kHz 4000mA 4000mA 0.021Ω±20% 25MHz LQH5BPN4R7N38p 4.7μH ±30% 100kHz 3500mA 3800mA 0.026Ω±20% 17MHz LQH5BPN6R8M38p 6.8μH ±20% 100kHz 3000mA 3000mA 0.039Ω±20% 15MHz LQH5BPN100M38p 10μH ±20% 100kHz 2600mA 2200mA 0.056Ω±20% 13MHz LQH5BPN150M38p 15μH ±20% 100kHz 1800mA 1900mA 0.08Ω±20% 10MHz LQH5BPN220M38p 22μH ±20% 100kHz 1600mA 1500mA 0.11Ω±20% 8.0MHz LQH5BPN330M38p 33μH ±20% 100kHz 1300mA 1300mA 0.15Ω±20% 6.5MHz LQH5BPN470M38p 47μH ±20% 100kHz 1100mA 1100mA 0.22Ω±20% 6.0MHz LQH5BPN680M38p 68μH ±20% 100kHz 900mA 930mA 0.33Ω±20% 5.0MHz LQH5BPN101M38p 100μH ±20% 100kHz 750mA 740mA 0.48Ω±20% 4.0MHz LQH5BPN151M38p 150μH ±20% 100kHz 650mA 630mA 0.68Ω±20% 3.5MHz Operating temp. range (Self-temp. rise included): -40 to 125°C Operating temp. range (Self-temp. rise not included): -40 to 85°C Class of Magnetic Shield: Magnetic Resin For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by TOKO Products Inductors for General Circuits self-generated heat shall be limited to 40°C max (ambient temperature 85°C). Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. 48 Continued on the following page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines Temperature Rise Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 49 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQH5BPN_T0 Series 2020 (5050) inch (mm) 2.0±0.2 Appearance/Dimensions Packaging Minimum Code Packaging K ø330mm Embossed Taping 3000 L ø180mm Embossed Taping 500 5.0±0.2 Quantity (0.2) Inductors for General Circuits Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 5.0±0.2 5.0±0.2 1.5±0.2 1.5±0.2 (in mm) Rated Value (p: packaging code) TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH5BPNR47NT0p 0.47μH ±30% 100kHz 7.7A 4.0A 0.012Ω±20% 220MHz LQH5BPN1R0NT0p 1.0μH ±30% 100kHz 5.8A 3.1A 0.019Ω±20% 90MHz LQH5BPN1R2NT0p 1.2μH ±30% 100kHz 5.4A 3.1A 0.019Ω±20% 90MHz LQH5BPN1R5NT0p 1.5μH ±30% 100kHz 5.0A 3.0A 0.024Ω±20% 70MHz LQH5BPN2R2NT0p 2.2μH ±30% 100kHz 4.0A 2.6A 0.030Ω±20% 55MHz LQH5BPN2R7NT0p 2.7μH ±30% 100kHz 3.8A 2.5A 0.035Ω±20% 50MHz LQH5BPN3R3NT0p 3.3μH ±30% 100kHz 3.5A 2.3A 0.044Ω±20% 40MHz LQH5BPN4R7NT0p 4.7μH ±30% 100kHz 3.0A 2.0A 0.058Ω±20% 40MHz LQH5BPN6R8NT0p 6.8μH ±30% 100kHz 2.5A 1.65A 0.083Ω±20% 30MHz LQH5BPN100MT0p 10μH ±20% 100kHz 2.0A 1.60A 0.106Ω±20% 25MHz LQH5BPN150MT0p 15μH ±20% 100kHz 1.6A 1.20A 0.187Ω±20% 18MHz LQH5BPN220MT0p 22μH ±20% 100kHz 1.4A 1.05A 0.259Ω±20% 15MHz Operating temp. range (Self-temp. rise included): -40 to 125°C Operating temp. range (Self-temp. rise not included): -40 to 85°C Class of Magnetic Shield: Magnetic Resin For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, self-temperature rise shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. TOKO Products Inductors for General Circuits Continued on the following page. 50 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines Temperature Rise Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 51 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQM18PN_B0 Series 0603 (1608) inch (mm) Appearance/Dimensions Packaging 0.4±0.2 Inductors for General Circuits Minimum Code Packaging L ø180mm Embossed Taping 4000 B Packing in Bulk 1000 Quantity Ferrite 1.6±0.15 0.8±0.15 0.35±0.05 Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. (in mm) Rated Value (p: packaging code) RF Inductors Part Number LQM18PN1R5NB0p Inductance 1.5μH ±30% Inductance Test Frequency 1MHz Rated Current DC Resistance S.R.F.* (min.) 600mA 0.35Ω±25% 50MHz Operating temp. range: -55 to 125°C Class of Magnetic Shield: Ferrite Core *S.R.F.: Self-Resonant Frequency TOKO Products Inductors for Power Lines Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) 52 Inductance-Current Characteristics (Typ.) O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM18PN_C0 Series 0603 (1608) inch (mm) Packaging 1.6±0.15 0.8±0.15 Minimum Code Packaging L ø180mm Embossed Taping 4000 B Packing in Bulk 1000 Quantity 0.5±0.05 Ferrite 0.4±0.2 Inductors for General Circuits Appearance/Dimensions (in mm) Part Number Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQM18PNR47NC0p 0.47μH ±30% 1MHz 850mA 0.15Ω±25% 50MHz LQM18PN1R0NC0p 1.0μH ±30% 1MHz 750mA 0.20Ω±25% 50MHz LQM18PN1R5NC0p 1.5μH ±30% 1MHz 720mA 0.22Ω±25% 50MHz LQM18PN1R8NC0p 1.8μH ±30% 1MHz 700mA 0.24Ω±25% 50MHz LQM18PN2R2NC0p 2.2μH ±30% 1MHz 700mA 0.24Ω±25% 50MHz RF Inductors Rated Value (p: packaging code) Operating temp. range: -55 to 125°C Class of Magnetic Shield: Ferrite Core *S.R.F.: Self-Resonant Frequency TOKO Products Inductors for Power Lines Inductance-Current Characteristics (Typ.) Continued on the following page. TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) 53 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 54 Temperature Rise Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM18PN_D0 Series 0603 (1608) inch (mm) Packaging 1.6±0.15 0.8±0.15 Minimum Code Packaging D ø180mm Paper Taping 4000 B Packing in Bulk 1000 Quantity 0.6±0.15 Ferrite 0.4±0.2 Inductors for General Circuits Appearance/Dimensions (in mm) Part Number LQM18PN2R5ND0p Inductance 2.5μH ±30% Inductance Test Frequency 1MHz Rated Current DC Resistance S.R.F.* (min.) 700mA 0.24Ω±25% 60MHz Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core RF Inductors Rated Value (p: packaging code) *S.R.F.: Self-Resonant Frequency Inductance-Current Characteristics (Typ.) TOKO Products Inductors for Power Lines Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) 55 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQM18PN_DH Series 0603 (1608) inch (mm) Appearance/Dimensions Packaging Ferrite Inductors for General Circuits 0.4±0.2 1.6±0.15 0.8±0.15 Minimum Code Packaging D ø180mm Paper Taping 4000 B Packing in Bulk 1000 Quantity 0.6±0.15 Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. (in mm) Rated Value (p: packaging code) RF Inductors Part Number LQM18PN2R2MDHp Inductance 2.2μH ±20% Inductance Test Frequency 1MHz Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) 250mA(Max) / 300mA(Typ.) 650mA(Max) / 800mA(Typ.) 0.38Ω(typ.) 60MHz Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines Inductance-Frequency Characteristics (Typ.) 56 Continued on the following page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 57 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines LQM18PN_F0 Series 0603 (1608) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits 0.80±0.15 0.4±0.20 1.6±0.15 Minimum Code Packaging L ø180mm Embossed Taping 4000 B Packing in Bulk 1000 Quantity 0.8±0.15 (in mm) Rated Value (p: packaging code) RF Inductors Part Number LQM18PN1R0NF0p Inductance 1.0μH ±30% Inductance Test Frequency 1MHz Rated Current DC Resistance S.R.F.* (min.) 600mA 0.28Ω±25% 50MHz Operating temp. range: -55 to 125°C Class of Magnetic Shield: Ferrite Core *S.R.F.: Self-Resonant Frequency TOKO Products Inductors for Power Lines Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) 58 Inductance-Current Characteristics (Typ.) O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM18PN_FH Series 0603 (1608) inch (mm) Appearance/Dimensions Packaging Minimum Code Packaging D ø180mm Paper Taping 4000 B Packing in Bulk 1000 Quantity Inductors for General Circuits 0.80±0.15 0.4±0.20 0.8±0.15 1.6±0.15 (in mm) Rated Value (p: packaging code) Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQM18PNR47MFHp 0.47μH ±20% 1MHz 1.3A(Max.) / 1.5A(Typ.) 1.4A(Max.) / 1.7A(Typ.) 0.1Ω(typ.) 100MHz LQM18PN1R0MFHp 1.0μH ±20% 1MHz 0.55A(Max) / 0.7A(Typ.) 1.3A(Max) / 1.45A(Typ.) 0.13Ω(typ.) 100MHz LQM18PN1R5MFHp 1.5μH ±20% 1MHz 0.4A(Max.) / 0.5A(Typ.) 1.1A(Max.) / 1.25A(Typ.) 0.17Ω(typ.) 80MHz LQM18PN2R2MFHp 2.2μH ±20% 1MHz 0.3A(Max) / 0.35A(Typ.) 0.7A(Max) / 0.9A(Typ.) 0.38Ω(typ.) 80MHz RF Inductors Part Number Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by Continued on the following page. 59 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 60 Temperature Rise Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM18PN_FR Series 0603 (1608) inch (mm) Packaging 0.80±0.15 0.4±0.20 1.6±0.15 Minimum Code Packaging L ø180mm Embossed Taping 4000 B Packing in Bulk 1000 Quantity Inductors for General Circuits Appearance/Dimensions 0.8±0.15 (in mm) Part Number Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) 100MHz LQM18PNR22NFRp 0.22μH ±30% 1MHz 1250mA 0.11Ω±25% LQM18PNR47NFRp 0.47μH ±30% 1MHz 1100mA 0.15Ω±25% 100MHz LQM18PN1R0MFRp 1.0μH ±20% 1MHz 950mA 0.20Ω±25% 100MHz LQM18PN1R5MFRp 1.5μH ±20% 1MHz 800mA 0.23Ω±25% 100MHz LQM18PN2R2MFRp 2.2μH ±20% 1MHz 750mA 0.30Ω±25% 70MHz LQM18PN3R3MFRp 3.3μH ±20% 1MHz 700mA 0.35Ω±25% 60MHz LQM18PN4R7MFRp 4.7μH ±20% 1MHz 620mA 0.44Ω±25% 40MHz RF Inductors Rated Value (p: packaging code) Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core Inductance-Current Characteristics (Typ.) Continued on the following page. TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines *S.R.F.: Self-Resonant Frequency 61 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 62 Temperature Rise Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM18PN_GH Series 0603 (1608) inch (mm) Appearance/Dimensions Packaging Packaging D ø180mm Paper Taping 4000 B Packing in Bulk 1000 Quantity 0.9±0.1 Inductors for General Circuits Electrode Ferrite 0.4±0.2 Minimum Code 1.6±0.2 0.8±0.2 (in mm) Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQM18PN1R0MGHp 1.0μH ±20% 1MHz 0.8A(Max.) / 0.9A(Typ.) 1.05A(Max.) / 1.15A(Typ.) 0.2Ω(typ.) 100MHz LQM18PN2R2MGHp 2.2μH ±20% 1MHz 0.25A(Max) / 0.35A(Typ.) 1.05A(Max) / 1.15A(Typ.) 0.2Ω(typ.) 70MHz LQM18PN3R3MGHp 3.3μH ±20% 1MHz 0.15A(Max.) / 0.2A(Typ.) 1.05A(Max.) / 1.15A(Typ.) 0.2Ω(typ.) 30MHz RF Inductors Rated Value (p: packaging code) Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self- Inductance-Current Characteristics (Typ.) Continued on the following page. TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. 63 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 64 Temperature Rise Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM18PW_CH Series 0603 (1608) inch (mm) Appearance/Dimensions Packaging Minimum Code Packaging D ø180mm Paper Taping 4000 B Packing in Bulk 1000 Quantity T Inductors for General Circuits 0.4±0.2 1.6±0.2 Dimension of T 0.8±0.2 Inductance: 1.0 to 2.2μH 0.50±0.15 Inductance: 2.5μH 0.45±0.15 (in mm) Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQM18PW1R0MCHp 1.0μH ±20% 1MHz 0.60A(Max) / 0.70A(Typ.) 0.95A(Max) / 1.05A(Typ.) 0.23Ω(typ.) 70MHz LQM18PW2R2MCHp 2.2μH ±20% 1MHz 0.20A(Max) / 0.30A(Typ.) 0.75A(Max) / 0.85A(Typ.) 0.38Ω(typ.) 50MHz LQM18PW2R5NCHp 2.5μH ±30% 1MHz 0.10A(Max) / 0.15A(Typ.) 0.90A(Max) / 1.00A(Typ.) 0.24Ω(typ.) 50MHz RF Inductors Rated Value (p: packaging code) Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by Inductance-Current Characteristics (Typ.) Continued on the following page. TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. 65 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 66 Temperature Rise Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM21PN_C0 Series 0805 (2012) inch (mm) Packaging Ferrite Minimum Code Packaging D ø180mm Paper Taping 4000 B Packing in Bulk 1000 Quantity Inductors for General Circuits 0.5±0.2 0.5±0.05 Appearance/Dimensions 1.25±0.2 2.0±0.2 (in mm) Part Number Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQM21PNR47MC0p 0.47μH ±20% 1MHz 1.1A(Ambient temp.85°C) 0.82A(Ambient temp.125°C) 0.12Ω±25% 100MHz LQM21PN1R0MC0p 1.0μH ±20% 1MHz 0.8A(Ambient temp.85°C) 0.60A(Ambient temp.125°C) 0.19Ω±25% 90MHz LQM21PN1R5MC0p 1.5μH ±20% 1MHz 0.7A(Ambient temp.85°C) 0.52A(Ambient temp.125°C) 0.26Ω±25% 70MHz LQM21PN2R2MC0p 2.2μH ±20% 1MHz 0.6A(Ambient temp.85°C) 0.45A(Ambient temp.125°C) 0.34Ω±25% 50MHz RF Inductors Rated Value (p: packaging code) Operating temp. range: -55 to 125°C *S.R.F.: Self-Resonant Frequency In operating temperatures exceeding +85°C, derating of current is necessary for the LQM21P_C0 series. Please apply the derating curve shown in the chart according to the operating temperature. Please consider the "Notice (Rating)." When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines Class of Magnetic Shield: Ferrite Core Continued on the following page. 67 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors 68 Temperature Rise Characteristics (Typ.) Notice (Rating) In operating temperatures exceeding +85°C, derating of current is necessary for the LQM21P_G0/GC/GR/C0 series. Please apply the derating curve shown in the chart according to the operating temperature. Derating of Rated Current Rated Current (A) Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. Rated Current at 85°C Rated Current at 125°C 0 85 Operating Temperature (°C) 125 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM21PN_CA Series 0805 (2012) inch (mm) Appearance/Dimensions Packaging Minimum Code Packaging D ø180mm Paper Taping 3000 B Packing in Bulk 1000 Quantity 0.55±0.1 Inductors for General Circuits 0.5±0.2 2.0±0.15 1.25±0.15 (in mm) Part Number LQM21PN2R2MCAp Inductance 2.2μH ±20% Inductance Test Frequency 1MHz Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) 0.28A(Max) / 0.30A(Typ.) 1.05A(Max) / 1.30A(Typ.) 0.2Ω(typ.) 40MHz Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core RF Inductors Rated Value (p: packaging code) For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. TOKO Products Inductors for Power Lines Inductance-Current Characteristics (Typ.) Continued on the following page. TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) 69 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 70 Temperature Rise Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM21PN_CH Series 0805 (2012) inch (mm) Appearance/Dimensions Packaging Minimum Code Packaging D ø180mm Paper Taping 3000 B Packing in Bulk 1000 Quantity 0.5±0.05 Inductors for General Circuits 0.5±0.2 2.0±0.15 1.25±0.15 (in mm) Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) 80MHz LQM21PNR47MCHp 0.47μH ±20% 1MHz 1.6A(Max.) / 1.8A(Typ.) 1.4A(Max.) / 1.8A(Typ.) 0.11Ω(typ.) LQM21PNR82MCHp 0.82μH ±20% 1MHz 0.7A(Max.) / 0.9A(Typ.) 1.3A(Max.) / 1.6A(Typ.) 0.13Ω(typ.) 60MHz LQM21PN1R0MCHp 1.0μH ±20% 1MHz 0.35A(Max.) / 0.5A(Typ.) 1.2A(Max.) / 1.5A(Typ.) 0.15Ω(typ.) 50MHz LQM21PN1R5MCHp 1.5μH ±20% 1MHz 0.25A(Max.) / 0.4A(Typ.) 1.1A(Max.) / 1.4A(Typ.) 0.17Ω(typ.) 40MHz LQM21PN2R2MCHp 2.2μH ±20% 1MHz 0.18A(Max.) / 0.2A(Typ.) 1.05A(Max.) / 1.3A(Typ.) 0.2Ω(typ.) 30MHz RF Inductors Rated Value (p: packaging code) Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines *S.R.F.: Self-Resonant Frequency Continued on the following page. 71 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 72 Temperature Rise Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM21PN_EH Series 0805 (2012) inch (mm) Appearance/Dimensions Packaging Minimum Code Packaging D ø180mm Paper Taping 3000 B Packing in Bulk 1000 Quantity Inductors for General Circuits 0.5±0.2 0.7±0.1 2.0±0.15 1.25±0.15 (in mm) Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQM21PNR24MEHp 0.24μH ±20% 1MHz 2.8A(Max.) / 3.1A(Typ.) 2.4A(Max.) / 2.9A(Typ.) 0.04Ω(typ.) 130MHz LQM21PNR47MEHp 0.47μH ±20% 1MHz 1.5A(Max.) / 1.8A(Typ.) 1.9A(Max.) / 2.4A(Typ.) 0.06Ω(typ.) 80MHz LQM21PN1R0MEHp 1.0μH ±20% 1MHz 0.8A(Max.) / 1A(Typ.) 1.6A(Max.) / 2A(Typ.) 0.085Ω(typ.) 50MHz LQM21PN1R5MEHp 1.5μH ±20% 1MHz 0.4A(Max.) / 0.55A(Typ.) 1.5A(Max.) / 1.8A(Typ.) 0.1Ω(typ.) 40MHz LQM21PN2R2MEHp 2.2μH ±20% 1MHz 0.3A(Max.) / 0.45A(Typ.) 1.1A(Max.) / 1.4A(Typ.) 0.175Ω(typ.) 30MHz RF Inductors Rated Value (p: packaging code) Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines *S.R.F.: Self-Resonant Frequency Continued on the following page. 73 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 74 Temperature Rise Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM21PN_G0 Series 0805 (2012) inch (mm) Appearance/Dimensions Packaging Minimum Code Packaging D ø180mm Paper Taping 4000 B Packing in Bulk 1000 Quantity 0.9±0.1 Inductors for General Circuits 0.5±0.2 2.0±0.15 1.25±0.15 (in mm) Part Number Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQM21PNR47MG0p 0.47μH ±20% 1MHz 1.3A(Ambient temp.85°C) 0.95A(Ambient temp.125°C) 0.075Ω(typ.) 100MHz LQM21PNR54MG0p 0.54μH ±20% 1MHz 1.3A(Ambient temp.85°C) 0.95A(Ambient temp.125°C) 0.075Ω(typ.) 100MHz LQM21PN3R3MG0p 3.3μH ±20% 1MHz 0.8A(Ambient temp.85°C) 0.55A(Ambient temp.125°C) 0.165Ω(typ.) 30MHz LQM21PN3R3NG0p 3.3μH ±30% 1MHz 0.8A(Ambient temp.85°C) 0.55A(Ambient temp.125°C) 0.165Ω(typ.) 30MHz RF Inductors Rated Value (p: packaging code) Operating temp. range: -55 to 125°C *S.R.F.: Self-Resonant Frequency In operating temperatures exceeding +85°C, derating of current is necessary for the LQM21P_G0 series. Please apply the derating curve shown in the chart according to the operating temperature. Please consider the "Notice (Rating)." When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines Class of Magnetic Shield: Ferrite Core Continued on the following page. 75 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors 76 Temperature Rise Characteristics (Typ.) Notice (Rating) In operating temperatures exceeding +85°C, derating of current is necessary for the LQM21P_G0/GC/GR/C0 series. Please apply the derating curve shown in the chart according to the operating temperature. Derating of Rated Current Rated Current (A) Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. Rated Current at 85°C Rated Current at 125°C 0 85 Operating Temperature (°C) 125 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM21PN_GC Series 0805 (2012) inch (mm) Appearance/Dimensions Packaging Minimum Code Packaging D ø180mm Paper Taping 4000 B Packing in Bulk 1000 Quantity 0.9±0.1 Inductors for General Circuits 0.5±0.2 2.0±0.15 1.25±0.15 (in mm) Part Number Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQM21PN1R0NGCp 1.0μH ±30% 1MHz 0.9A(Ambient temp.85°C) 0.65A(Ambient temp.125°C) 0.10Ω±25% 50MHz LQM21PN2R2NGCp 2.2μH ±30% 1MHz 0.8A(Ambient temp.85°C) 0.6A(Ambient temp.125°C) 0.23Ω±25% 40MHz RF Inductors Rated Value (p: packaging code) Operating temp. range: -55 to 125°C Class of Magnetic Shield: Ferrite Core *S.R.F.: Self-Resonant Frequency In operating temperatures exceeding +85°C, derating of current is necessary for the LQM21P_GC series. Please apply the derating curve shown in the chart according to the operating temperature. Please consider the "Notice (Rating)." When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. TOKO Products Inductors for Power Lines Inductance-Current Characteristics (Typ.) Continued on the following page. TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) 77 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors 78 Temperature Rise Characteristics (Typ.) Notice (Rating) In operating temperatures exceeding +85°C, derating of current is necessary for the LQM21P_G0/GC/GR/C0 series. Please apply the derating curve shown in the chart according to the operating temperature. Derating of Rated Current Rated Current (A) Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. Rated Current at 85°C Rated Current at 125°C 0 85 Operating Temperature (°C) 125 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM21PN_GH Series 0805 (2012) inch (mm) Appearance/Dimensions Packaging Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity 0.9±0.1 Inductors for General Circuits 0.5±0.2 2.0±0.15 1.25±0.15 (in mm) Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQM21PNR47MGHp 0.47μH ±20% 1MHz 1.8A(Max) / 2.4A(Typ.) 2.4A(Max) / 3.1A(Typ.) 0.04Ω(typ.) 80MHz LQM21PN1R0MGHp 1.0μH ±20% 1MHz 1.1A(Max) / 1.5A(Typ.) 1.7A(Max) / 2.0A(Typ.) 0.08Ω(typ.) 60MHz LQM21PN1R5MGHp 1.5μH ±20% 1MHz 0.64A(Max) / 1.2A(Typ.) 1.4A(Max) / 1.8A(Typ.) 0.11Ω(typ.) 50MHz LQM21PN2R2MGHp 2.2μH ±20% 1MHz 0.45A(Max) / 0.7A(Typ.) 1.3A(Max) / 1.7A(Typ.) 0.125Ω(typ.) 40MHz LQM21PN4R7MGHp 4.7μH ±20% 1MHz 0.25A(Max) / 0.27A(Typ.) 1.0A(Max) / 1.2A(Typ.) 0.22Ω(typ.) 20MHz RF Inductors Rated Value (p: packaging code) Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines *S.R.F.: Self-Resonant Frequency Continued on the following page. 79 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 80 Temperature Rise Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM21PN_GR Series 0805 (2012) inch (mm) Appearance/Dimensions Packaging Minimum Code Packaging D ø180mm Paper Taping 4000 B Packing in Bulk 1000 Quantity 0.9±0.1 Inductors for General Circuits 0.5±0.2 2.0±0.15 1.25±0.15 (in mm) Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQM21PN1R0NGRp 1.0μH ±30% 1MHz 1.3A(Ambient temp.85°C) 0.95A(Ambient temp.125°C) 0.066Ω±25% 50MHz LQM21PN3R3MGRp 3.3μH ±20% 1MHz 1.0A(Ambient temp.85°C) 0.75A(Ambient temp.125°C) 0.150Ω±25% 30MHz LQM21PN3R3NGRp 3.3μH ±30% 1MHz 1.0A(Ambient temp.85°C) 0.75A(Ambient temp.125°C) 0.150Ω±25% 30MHz LQM21PN4R7MGRp 4.7μH ±20% 1MHz 0.8A(Ambient temp.85°C) 0.6A(Ambient temp.125°C) 0.23Ω±25% 30MHz LQM21PN4R7NGRp 4.7μH ±30% 1MHz 0.8A(Ambient temp.85°C) 0.6A(Ambient temp.125°C) 0.23Ω±25% 30MHz Operating temp. range: -55 to 125°C Class of Magnetic Shield: Ferrite Core *S.R.F.: Self-Resonant Frequency In operating temperatures exceeding +85°C, derating of current is necessary for the LQM21P_GR series. Please apply the derating curve shown in the chart according to the operating temperature. Please consider the "Notice (Rating)." When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines Part Number RF Inductors Rated Value (p: packaging code) Continued on the following page. 81 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors 82 Temperature Rise Characteristics (Typ.) Notice (Rating) In operating temperatures exceeding +85°C, derating of current is necessary for the LQM21P_G0/GC/GR/C0 series. Please apply the derating curve shown in the chart according to the operating temperature. Derating of Rated Current Rated Current (A) Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. Rated Current at 85°C Rated Current at 125°C 0 85 Operating Temperature (°C) 125 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM21PN_GS Series 0805 (2012) inch (mm) Appearance/Dimensions Packaging Minimum Code Packaging D ø180mm Paper Taping 4000 B Packing in Bulk 1000 Quantity 0.9±0.1 Inductors for General Circuits 0.5±0.2 2.0±0.15 1.25±0.15 (in mm) Part Number Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQM21PN2R2MGSp 2.2μH ±20% 1MHz 950mA 0.180Ω±25% 40MHz LQM21PN4R7MGSp 4.7μH ±20% 1MHz 750mA 0.290Ω±25% 20MHz Operating temp. range: -40 to 85°C RF Inductors Rated Value (p: packaging code) Class of Magnetic Shield: Ferrite Core *S.R.F.: Self-Resonant Frequency TOKO Products Inductors for Power Lines Inductance-Current Characteristics (Typ.) Continued on the following page. TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) 83 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 84 Temperature Rise Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM2HPN_CH Series 1008 (2520) inch (mm) Packaging 0.6±0.2 0.5±0.05 Appearance/Dimensions Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity Inductors for General Circuits 2.0±0.2 2.5±0.2 (in mm) Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQM2HPNR24MCHp 0.24μH ±20% 1MHz 2.55A(Max.) / 3A(Typ.) 2.2A(Max.) / 2.7A(Typ.) 0.055Ω(typ.) 130MHz LQM2HPNR47MCHp 0.47μH ±20% 1MHz 1.66A(Max.) / 1.95A(Typ.) 1.5A(Max.) / 1.9A(Typ.) 0.115Ω(typ.) 80MHz LQM2HPNR68MCHp 0.68μH ±20% 1MHz 1.1A(Max.) / 1.3A(Typ.) 1.5A(Max.) / 1.8A(Typ.) 0.12Ω(typ.) 60MHz LQM2HPN1R0MCHp 1.0μH ±20% 1MHz 0.6A(Max.) / 0.7A(Typ.) 1.7A(Max.) / 2.1A(Typ.) 0.08Ω(typ.) 50MHz LQM2HPN1R5MCHp 1.5μH ±20% 1MHz 0.6A(Max.) / 0.7A(Typ.) 0.95A(Max.) / 1.1A(Typ.) 0.285Ω(typ.) 40MHz LQM2HPN2R2MCHp 2.2μH ±20% 1MHz 0.43A(Max.) / 0.5A(Typ.) 0.85A(Max.) / 1.05A(Typ.) 0.355Ω(typ.) 30MHz RF Inductors Rated Value (p: packaging code) Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core For reflow soldering only *Isat: Rated Current based on Inductance change *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines *Itemp: Rated Current based on Temperature rise Continued on the following page. 85 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 86 Temperature Rise Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM2HPN_E0 Series 1008 (2520) inch (mm) Packaging 0.6±0.2 Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity Inductors for General Circuits 0.7±0.1 Appearance/Dimensions 2.0±0.2 2.5±0.2 (in mm) Part Number LQM2HPNR56ME0p Inductance 0.56μH ±20% Inductance Test Frequency 1MHz Rated Current DC Resistance S.R.F.* (min.) 1500mA 0.06Ω±25% 70MHz Operating temp. range: -55 to 125°C Class of Magnetic Shield: Ferrite Core RF Inductors Rated Value (p: packaging code) *S.R.F.: Self-Resonant Frequency Inductance-Current Characteristics (Typ.) TOKO Products Inductors for Power Lines Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) 87 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQM2HPN_EH Series 1008 (2520) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits 0.6±0.2 0.7±0.1 Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity 2.0±0.2 2.5±0.2 (in mm) Rated Value (p: packaging code) RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQM2HPNR24MEHp 0.24μH ±20% 1MHz 4.5A(Max) / 5.0A(Typ.) 3.0A(Max) / 3.8A(Typ.) 0.027Ω(typ.) 130MHz LQM2HPNR47MEHp 0.47μH ±20% 1MHz 4.0A(Max) / 4.3A(Typ.) 2.2A(Max) / 2.6A(Typ.) 0.055Ω(typ.) 80MHz LQM2HPNR68MEHp 0.68μH ±20% 1MHz 2.1A(Max) / 2.3A(Typ.) 1.85A(Max) / 2.3A(Typ.) 0.075Ω(typ.) 60MHz LQM2HPN1R0MEHp 1.0μH ±20% 1MHz 1.9A(Max) / 2.1A(Typ.) 1.65A(Max) / 2.0A(Typ.) 0.095Ω(typ.) 50MHz LQM2HPN1R5MEHp 1.5μH ±20% 1MHz 1.2A(Max) / 1.4A(Typ.) 1.45A(Max) / 1.8A(Typ.) 0.12Ω(typ.) 40MHz LQM2HPN2R2MEHp 2.2μH ±20% 1MHz 0.8A(Max) / 1.0A(Typ.) 1.3A(Max) / 1.7A(Typ.) 0.15Ω(typ.) 30MHz Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core For reflow soldering only *Isat: Rated Current based on Inductance change *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines *Itemp: Rated Current based on Temperature rise Continued on the following page. 88 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 89 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQM2HPN_G0 Series 1008 (2520) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits 0.6±0.2 0.9±0.1 Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity 2.0±0.2 2.5±0.2 (in mm) Rated Value (p: packaging code) TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQM2HPNR47MG0p 0.47μH ±20% 1MHz 1.8A(Ambient temp.85°C) 1.3A(Ambient temp.125°C) 0.040Ω(typ.) 100MHz LQM2HPN1R0MG0p 1.0μH ±20% 1MHz 1.6A(Ambient temp.85°C) 1.2A(Ambient temp.125°C) 0.055Ω(typ.) 60MHz LQM2HPN1R5MG0p 1.5μH ±20% 1MHz 1.5A(Ambient temp.85°C) 1.1A(Ambient temp.125°C) 0.070Ω(typ.) 50MHz LQM2HPN2R2MG0p 2.2μH ±20% 1MHz 1.3A(Ambient temp.85°C) 0.97A(Ambient temp.125°C) 0.080Ω(typ.) 40MHz LQM2HPN3R3MG0p 3.3μH ±20% 1MHz 1.2A(Ambient temp.85°C) 0.9A(Ambient temp.125°C) 0.10Ω(typ.) 30MHz LQM2HPN4R7MG0p 4.7μH ±20% 1MHz 1.1A(Ambient temp.85°C) 0.82A(Ambient temp.125°C) 0.11Ω(typ.) 25MHz Operating temp. range: -55 to 125°C Class of Magnetic Shield: Ferrite Core *S.R.F.: Self-Resonant Frequency In operating temperatures exceeding +85°C, derating of current is necessary for the LQM2HP_G0 series. Please apply the derating curve shown in the chart according to the operating temperature. Please consider the "Notice (Rating)." When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) Continued on the following page. 90 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Notice (Rating) In operating temperatures exceeding +85°C, derating of current is necessary for the LQM2HP_G0 series. Please apply the derating curve shown in the chart according to the operating temperature. Derating of Rated Current 85 Operating Temperature (°C) 125 RF Inductors 0 TOKO Products Inductors for Power Lines Rated Current at 125°C Inductors for General Circuits Rated Current at 85°C TOKO Products Inductors for General Circuits Rated Current (A) Temperature Rise Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 91 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQM2HPN_GC Series 1008 (2520) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits 0.6±0.2 0.9±0.1 Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity 2.0±0.2 2.5±0.2 (in mm) Rated Value (p: packaging code) RF Inductors Part Number Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) Operating temp. range LQM2HPN1R0MGCp 1.0μH ±20% 1MHz 1500mA 0.08Ω±25% 50MHz -30 to 85°C LQM2HPN3R3MGCp 3.3μH ±20% 1MHz 1000mA 0.16Ω±25% 30MHz -55 to 125°C LQM2HPN4R7MGCp 4.7μH ±20% 1MHz 800mA 0.18Ω±25% 25MHz -55 to 125°C Class of Magnetic Shield: Ferrite Core *S.R.F.: Self-Resonant Frequency Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines Inductance-Frequency Characteristics (Typ.) 92 Continued on the following page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 93 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQM2HPN_GH Series 1008 (2520) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits 0.6±0.2 0.9±0.1 Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity 2.0±0.2 2.5±0.2 (in mm) Rated Value (p: packaging code) RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQM2HPNR24MGHp 0.24μH ±20% 1MHz 4.5A(Max) / 5.7A(Typ.) 3.3A(Max) / 4.2A(Typ.) 0.024Ω(typ.) 80MHz LQM2HPNR33MGHp 0.33μH ±20% 1MHz 5A(Max) / 5.3A(Typ.) 3A(Max) / 4A(Typ.) 0.03Ω(typ.) 80MHz LQM2HPNR47MGHp 0.47μH ±20% 1MHz 4.5A(Max) / 4.8A(Typ.) 2.6A(Max) / 3.3A(Typ.) 0.04Ω(typ.) 80MHz LQM2HPNR68MGHp 0.68μH ±20% 1MHz 3.8A(Max) / 4.0A(Typ.) 2.3A(Max) / 2.9A(Typ.) 0.05Ω(typ.) 60MHz LQM2HPN1R0MGHp 1.0μH ±20% 1MHz 2.0A(Max) / 2.3A(Typ.) 2.3A(Max) / 2.9A(Typ.) 0.05Ω(typ.) 50MHz LQM2HPN1R5MGHp 1.5μH ±20% 1MHz 1.5A(Max) / 1.6A(Typ.) 2.0A(Max) / 2.6A(Typ.) 0.065Ω(typ.) 40MHz LQM2HPN2R2MGHp 2.2μH ±20% 1MHz 1.5A(Max) / 1.6A(Typ.) 1.5A(Max) / 1.9A(Typ.) 0.11Ω(typ.) 30MHz Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines For reflow soldering only Continued on the following page. 94 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 95 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQM2HPN_GS Series 1008 (2520) inch (mm) Appearance/Dimensions Packaging 0.9±0.1 Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Inductors for General Circuits 0.6±0.2 Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity 2.0±0.2 2.5±0.2 (in mm) Rated Value (p: packaging code) RF Inductors Part Number Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQM2HPN2R2MGSp 2.2μH ±20% 1MHz 1100mA 0.18Ω±25% 40MHz LQM2HPN3R3MGSp 3.3μH ±20% 1MHz 1050mA 0.21Ω±25% 20MHz LQM2HPN4R7MGSp 4.7μH ±20% 1MHz 1000mA 0.25Ω±25% 20MHz Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core *S.R.F.: Self-Resonant Frequency Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines Inductance-Frequency Characteristics (Typ.) 96 Continued on the following page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 97 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines LQM2HPN_J0 Series 1008 (2520) inch (mm) Appearance/Dimensions Packaging Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity Inductors for General Circuits 1.1±0.1 0.6±0.2 2.0±0.2 2.5±0.2 (in mm) Rated Value (p: packaging code) RF Inductors Part Number Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQM2HPN1R0MJ0p 1.0μH ±20% 1MHz 1500mA 0.09Ω±25% 70MHz LQM2HPN2R2MJ0p 2.2μH ±20% 1MHz 1000mA 0.12Ω±25% 40MHz LQM2HPN3R3MJ0p 3.3μH ±20% 1MHz 1000mA 0.12Ω±25% 30MHz Operating temp. range: -55 to 125°C Class of Magnetic Shield: Ferrite Core *S.R.F.: Self-Resonant Frequency Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines Inductance-Frequency Characteristics (Typ.) 98 Continued on the following page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 99 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines LQM2HPN_JH Series 1008 (2520) inch (mm) Appearance/Dimensions Packaging Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity Inductors for General Circuits 1.1±0.1 0.6±0.2 2.0±0.2 2.5±0.2 (in mm) Rated Value (p: packaging code) RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQM2HPNR47MJHp 0.47μH ±20% 1MHz 3.2A(Max) / 3.5A(Typ.) 2.7A(Max) / 3.4A(Typ.) 0.037Ω(typ.) 70MHz LQM2HPN1R0MJHp 1.0μH ±20% 1MHz 2.1A(Max) / 2.4A(Typ.) 2.3A(Max) / 2.9A(Typ.) 0.05Ω(typ.) 50MHz LQM2HPN2R2MJHp 2.2μH ±20% 1MHz 1.4A(Max) / 1.6A(Typ.) 1.5A(Max) / 1.9A(Typ.) 0.11Ω(typ.) 30MHz Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines heating will be 40°Cor less. Keep the temperature of product (ambient temperature plus self-generation of heat) under 125°C. 100 Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.) Continued on the following page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 101 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines LQM2MPN_DH Series 0806 (2016) inch (mm) Appearance/Dimensions Packaging Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity 0.6±0.1 Inductors for General Circuits 0.5±0.2 2.0±0.15 1.6±0.15 (in mm) Rated Value (p: packaging code) RF Inductors Part Number LQM2MPN2R2MDHp Inductance 2.2μH ±20% Inductance Test Frequency 1MHz Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) 0.63A(Max.) / 0.68A(Typ.) 1.27A(Max.) / 1.35A(Typ.) 0.2Ω(typ.) 40MHz Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines Inductance-Frequency Characteristics (Typ.) 102 Continued on the following page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 103 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines LQM2MPN_EH Series 0806 (2016) inch (mm) Appearance/Dimensions Packaging Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity 0.7±0.1 Inductors for General Circuits 0.5±0.2 2.0±0.2 1.6±0.2 (in mm) Rated Value (p: packaging code) RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQM2MPNR24MEHp 0.24μH ±20% 1MHz 4.1A(Max) / 4.5A(Typ.) 2.6A(Max) / 3.3A(Typ.) 0.035Ω(typ.) 130MHz LQM2MPNR47MEHp 0.47μH ±20% 1MHz 2.3A(Max) / 2.5A(Typ.) 2.15A(Max) / 2.8A(Typ.) 0.05Ω(typ.) 80MHz LQM2MPNR68MEHp 0.68μH ±20% 1MHz 2.0A(Max) / 2.2A(Typ.) 1.75A(Max) / 2.3A(Typ.) 0.075Ω(typ.) 60MHz LQM2MPN1R0MEHp 1.0μH ±20% 1MHz 1.8A(Max) / 2.0A(Typ.) 1.5A(Max) / 2.0A(Typ.) 0.1Ω(typ.) 50MHz LQM2MPN1R5MEHp 1.5μH ±20% 1MHz 0.75A(Max) / 0.9A(Typ.) 1.6A(Max) / 2.1A(Typ.) 0.09Ω(typ.) 40MHz LQM2MPN2R2MEHp 2.2μH ±20% 1MHz 0.7A(Max) / 0.85A(Typ.) 1.1A(Max) / 1.45A(Typ.) 0.18Ω(typ.) 30MHz Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core For reflow soldering only *Isat: Rated Current based on Inductance change *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines *Itemp: Rated Current based on Temperature rise Continued on the following page. 104 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 105 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQM2MPN_G0 Series 0806 (2016) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits 0.5±0.2 0.9±0.1 Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity 1.6±0.15 2.0±0.15 (in mm) Rated Value (p: packaging code) TOKO Products Inductors for Power Lines RF Inductors Part Number Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQM2MPNR47MG0p 0.47μH ±20% 1MHz 1.6A(Ambient temp.85°C) 1.2A(Ambient temp.125°C) 0.060Ω(typ.) 100MHz LQM2MPNR47NG0p 0.47μH ±30% 1MHz 1.6A(Ambient temp.85°C) 1.2A(Ambient temp.125°C) 0.060Ω(typ.) 100MHz LQM2MPN1R0NG0p 1.0μH ±30% 1MHz 1.4A(Ambient temp.85°C) 1.0A(Ambient temp.125°C) 0.085Ω(typ.) 60MHz LQM2MPN1R5MG0p 1.5μH ±20% 1MHz 1.2A(Ambient temp.85°C) 0.9A(Ambient temp.125°C) 0.11Ω(typ.) 50MHz LQM2MPN1R5NG0p 1.5μH ±30% 1MHz 1.2A(Ambient temp.85°C) 0.9A(Ambient temp.125°C) 0.11Ω(typ.) 50MHz LQM2MPN2R2MG0p 2.2μH ±20% 1MHz 1.2A(Ambient temp.85°C) 0.9A(Ambient temp.125°C) 0.11Ω(typ.) 40MHz LQM2MPN2R2NG0p 2.2μH ±30% 1MHz 1.2A(Ambient temp.85°C) 0.9A(Ambient temp.125°C) 0.11Ω(typ.) 40MHz LQM2MPN3R3NG0p 3.3μH ±30% 1MHz 1.2A(Ambient temp.85°C) 0.9A(Ambient temp.125°C) 0.12Ω(typ.) 30MHz LQM2MPN4R7MG0p 4.7μH ±20% 1MHz 1.1A(Ambient temp.85°C) 0.8A(Ambient temp.125°C) 0.14Ω(typ.) 20MHz LQM2MPN4R7NG0p 4.7μH ±30% 1MHz 1.1A(Ambient temp.85°C) 0.8A(Ambient temp.125°C) 0.14Ω(typ.) 20MHz TOKO Products Inductors for General Circuits Operating temp. range: -55 to 125°C 106 Class of Magnetic Shield: Ferrite Core *S.R.F.: Self-Resonant Frequency In operating temperatures exceeding +85°C, derating of current is necessary for the LQM2MPN_G0 series. Please apply the derating curve shown in the chart according to the operating temperature. Please consider the "Notice (Rating)." When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Continued on the following page. O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductance-Current Characteristics (Typ.) Temperature Rise Characteristics (Typ.) Notice (Rating) Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. RF Inductors In operating temperatures exceeding +85°C, derating of current is necessary for the LQM2MP_G0 series. Please apply the derating curve shown in the chart according to the operating temperature. Rated Current at 85°C Rated Current at 125°C 0 125 TOKO Products Inductors for Power Lines 85 Operating Temperature (°C) TOKO Products Inductors for General Circuits Rated Current (A) Derating of Rated Current 107 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Apr.28,2017 Inductors for Power Lines LQM2MPN_GH Series 0806 (2016) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits 0.5±0.2 0.9±0.1 Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity 1.6±0.2 2.0±0.2 (in mm) Rated Value (p: packaging code) RF Inductors Part Number Inductance Inductance Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQM2MPNR16MGHp 0.16μH ±20% 1MHz 5.0A(Max) / 5.5A(Typ.) 4.0A(Max) / 5.0A(Typ.) 0.014Ω(typ.) 150MHz LQM2MPNR24MGHp 0.24μH ±20% 1MHz 4.8A(Max) / 5.0A(Typ.) 3.4A(Max) / 4.4A(Typ.) 0.02Ω(typ.) 130MHz LQM2MPNR33MGHp 0.33μH ±20% 1MHz 3.7A(Max) / 3.9A(Typ.) 3.1A(Max) / 4.0A(Typ.) 0.024Ω(typ.) 90MHz LQM2MPNR47MGHp 0.47μH ±20% 1MHz 3.4A(Max) / 3.6A(Typ.) 2.5A(Max) / 3.2A(Typ.) 0.037Ω(typ.) 80MHz 60MHz LQM2MPNR68MGHp 0.68μH ±20% 1MHz 3.1A(Max) / 3.4A(Typ.) 1.9A(Max) / 2.5A(Typ.) 0.055Ω(typ.) LQM2MPN1R0MGHp 1.0μH ±20% 1MHz 2.0A(Max) / 2.3A(Typ.) 1.9A(Max) / 2.4A(Typ.) 0.064Ω(typ.) 60MHz LQM2MPN1R5MGHp 1.5μH ±20% 1MHz 1.8A(Max) / 2.0A(Typ.) 1.5A(Max) / 1.9A(Typ.) 0.104Ω(typ.) 50MHz LQM2MPN2R2MGHp 2.2μH ±20% 1MHz 1.3A(Max) / 1.5A(Typ.) 1.0A(Max) / 1.3A(Typ.) 0.21Ω(typ.) 40MHz Operating temp. range: -40 to 85°C For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C. Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines Class of Magnetic Shield: Ferrite Core Continued on the following page. 108 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 109 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines LQM31PN_00 Series 1206 (3216) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits 0.85±0.1 0.6±0.2 3.2±0.2 Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity 1.6±0.2 (in mm) Rated Value (p: packaging code) RF Inductors Part Number Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQM31PNR47M00p 0.47μH ±20% 1MHz 1400mA 0.07Ω±25% 80MHz LQM31PN1R0M00p 1.0μH ±20% 1MHz 1200mA 0.12Ω±25% 60MHz LQM31PN1R5M00p 1.5μH ±20% 1MHz 1000mA 0.14Ω±25% 50MHz LQM31PN2R2M00p 2.2μH ±20% 1MHz 900mA 0.19Ω±25% 40MHz LQM31PN3R3M00p 3.3μH ±20% 1MHz 800mA 0.24Ω±25% 30MHz LQM31PN4R7M00p 4.7μH ±20% 1MHz 700mA 0.30Ω±25% 25MHz Operating temp. range: -55 to 125°C Class of Magnetic Shield: Ferrite Core TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines *S.R.F.: Self-Resonant Frequency 110 Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.) Continued on the following page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for General Circuits RF Inductors TOKO Products Inductors for Power Lines TOKO Products Inductors for General Circuits Temperature Rise Characteristics (Typ.) Inductors for Power Lines Continued from the preceding page. 111 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines LQM32PN_G0 Series 1210 (3225) inch (mm) Appearance/Dimensions Packaging Inductors for General Circuits 0.9±0.1 0.6±0.2 3.2±0.15 Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity 2.5±0.15 (in mm) Rated Value (p: packaging code) RF Inductors Part Number LQM32PN1R0MG0p Inductance 1.0μH ±20% Inductance Test Frequency 1MHz Rated Current DC Resistance S.R.F.* (min.) 1800mA 0.048Ω±25% 40MHz Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core For reflow soldering only *S.R.F.: Self-Resonant Frequency TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines Inductance-Frequency Characteristics (Typ.) 112 Temperature Rise Characteristics (Typ.) Inductance-Current Characteristics (Typ.) O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM32PN_GC Series 1210 (3225) inch (mm) Appearance/Dimensions Packaging Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity Inductors for General Circuits 0.9±0.1 0.6±0.2 2.5±0.15 3.2±0.15 (in mm) Part Number LQM32PN1R0MGCp Inductance 1.0μH ±20% Inductance Test Frequency 1MHz Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) 2.2A(Max.) / 2.9A(Typ.) 1.8A(Max.) / 2.4A(Typ.) 0.043Ω(Typ.) 60MHz Operating temp. range: -40 to 85°C Class of Magnetic Shield: Ferrite Core RF Inductors Rated Value (p: packaging code) For reflow soldering only *Isat: Rated Current based on Inductance change *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±30% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self heating will be 40°Cor less. Keep the temperature of product (ambient temperature plus self-generation of heat) under 125°C. TOKO Products Inductors for Power Lines Inductance-Current Characteristics (Typ.) Continued on the following page. TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) 113 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 114 Temperature Rise Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQW15CN_00 Series 0402 (1005) inch (mm) Packaging Minimum Code Packaging D ø180mm Paper Taping 10000 B Packing in Bulk 500 Quantity Inductors for General Circuits 1.0±0.1 (0.1) 0.5±0.1 Appearance/Dimensions 0.5±0.1 0.55±0.1 0.3±0.1 0.3±0.1 (in mm) Part Number Inductance LQW15CN18NJ00p 18nH ±5% LQW15CN33NJ00p 33nH ±5% LQW15CN48NJ00p LQW15CN70NJ00p Inductance Rated Current Max. of DC Resistance S.R.F.* (min.) 100MHz 1400mA 0.046Ω 3000MHz 100MHz 1300mA 0.065Ω 1800MHz 48nH ±5% 100MHz 1100mA 0.078Ω 1400MHz 70nH ±5% 100MHz 820mA 0.12Ω 1300MHz LQW15CN96NJ00p 96nH ±5% 100MHz 730mA 0.16Ω 1100MHz LQW15CNR13J00p 130nH ±5% 100MHz 640mA 0.23Ω 1000MHz LQW15CNR16J00p 160nH ±5% 100MHz 480mA 0.33Ω 900MHz LQW15CNR20J00p 200nH ±5% 100MHz 390mA 0.47Ω 800MHz Test Frequency RF Inductors Rated Value (p: packaging code) Operating temp. range (Self-temp. rise not included): -55 to 125°C For reflow soldering only *S.R.F.: Self-Resonant Frequency In operating temperatures exceeding +85°C, derating of current is necessary for the LQW15C series. Please apply the derating curve shown in the chart according to the operating temperature. Please consider the "Notice (Rating)." Impedance-Frequency Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines Class of Magnetic Shield: No Shield Continued on the following page. 115 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice (Rating) In operating temperatures exceeding +85°C, derating of current is necessary for the LQW15C series. Please apply the derating curve shown in the chart according to the operating temperature. Derating of Rated Current TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Rated Derating (%) Inductors for Power Lines Continued from the preceding page. 116 100 50 0 0 85 Operating Temperature (°C) 125 O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQW15CN_10 Series 0402 (1005) inch (mm) Packaging Minimum Code Packaging D ø180mm Paper Taping 10000 B Packing in Bulk 500 Quantity (0.1) 0.5±0.1 0.6±0.05 1.0±0.1 Inductors for General Circuits Appearance/Dimensions 0.3±0.1 (in mm) Inductance Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.) LQW15CN20NJ10p 20nH ±5% 100MHz 2200mA 0.028Ω 3000MHz LQW15CN20NK10p 20nH ±10% 100MHz 2200mA 0.028Ω 3000MHz LQW15CN34NJ10p 34nH ±5% 100MHz 1800mA 0.036Ω 2500MHz LQW15CN34NK10p 34nH ±10% 100MHz 1800mA 0.036Ω 2500MHz LQW15CN53NJ10p 53nH ±5% 100MHz 1300mA 0.06Ω 2000MHz LQW15CN53NK10p 53nH ±10% 100MHz 1300mA 0.06Ω 2000MHz LQW15CN77NJ10p 77nH ±5% 100MHz 1100mA 0.09Ω 2000MHz LQW15CN77NK10p 77nH ±10% 100MHz 1100mA 0.09Ω 2000MHz LQW15CNR11J10p 106nH ±5% 100MHz 850mA 0.144Ω 1500MHz 1500MHz LQW15CNR11K10p 106nH ±10% 100MHz 850mA 0.144Ω LQW15CNR14J10p 140nH ±5% 100MHz 650mA 0.216Ω 1000MHz LQW15CNR14K10p 140nH ±10% 100MHz 650mA 0.216Ω 1000MHz LQW15CNR18J10p 180nH ±5% 100MHz 560mA 0.312Ω 1000MHz LQW15CNR18K10p 180nH ±10% 100MHz 560mA 0.312Ω 1000MHz LQW15CNR22J10p 220nH ±5% 100MHz 450mA 0.47Ω 1400MHz LQW15CNR22K10p 220nH ±10% 100MHz 450mA 0.47Ω 1400MHz LQW15CNR27J10p 270nH ±5% 100MHz 420mA 0.52Ω 830MHz LQW15CNR27K10p 270nH ±10% 100MHz 420mA 0.52Ω 830MHz LQW15CNR33J10p 330nH ±5% 100MHz 390mA 0.56Ω 520MHz LQW15CNR33K10p 330nH ±10% 100MHz 390mA 0.56Ω 520MHz 450MHz LQW15CNR39J10p 390nH ±5% 100MHz 370mA 0.62Ω LQW15CNR39K10p 390nH ±10% 100MHz 370mA 0.62Ω 450MHz LQW15CNR42J10p 420nH ±5% 10MHz 370mA 0.62Ω 400MHz LQW15CNR42K10p 420nH ±10% 10MHz 370mA 0.62Ω 400MHz LQW15CNR47J10p 470nH ±5% 10MHz 350mA 0.66Ω 380MHz 380MHz LQW15CNR47K10p 470nH ±10% 10MHz 350mA 0.66Ω LQW15CNR56J10p 560nH ±5% 10MHz 300mA 0.71Ω 300MHz LQW15CNR56K10p 560nH ±10% 10MHz 300mA 0.71Ω 300MHz LQW15CNR68M10p 680nH ±20% 1MHz 290mA 0.78Ω 290MHz LQW15CNR82M10p 820nH ±20% 1MHz 275mA 0.84Ω 200MHz TOKO Products Inductors for Power Lines Inductance TOKO Products Inductors for General Circuits Part Number RF Inductors Rated Value (p: packaging code) Operating temp. range (Self-temp. rise not included): -55 to 125°C Class of Magnetic Shield: No Shield For reflow soldering only *S.R.F.: Self-Resonant Frequency In operating temperatures exceeding +85°C, derating of current is necessary for the LQW15C series. Please apply the derating curve shown in the chart according to the operating temperature. Please consider the "Notice (Rating)." Continued on the following page. 117 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Continued from the preceding page. Part Number Inductance Inductance Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.) LQW15CN1R0M10p 1000nH ±20% 1MHz 270mA 0.94Ω 120MHz LQW15CN1R5M10p 1500nH ±20% 1MHz 190mA 1.50Ω 120MHz LQW15CN2R2M10p 2200nH ±20% 1MHz 170mA 1.80Ω 100MHz LQW15CN3R3M10p 3300nH ±20% 1MHz 130mA 3.65Ω 80MHz Operating temp. range (Self-temp. rise not included): -55 to 125°C Class of Magnetic Shield: No Shield For reflow soldering only *S.R.F.: Self-Resonant Frequency In operating temperatures exceeding +85°C, derating of current is necessary for the LQW15C series. Please apply the derating curve shown in the chart according to the operating Inductance-Frequency Characteristics (Typ.) Impedance-Frequency Characteristics (Typ.) RF Inductors Inductors for General Circuits temperature. Please consider the "Notice (Rating)." In operating temperatures exceeding +85°C, derating of current is necessary for the LQW15C series. Please apply the derating curve shown in the chart according to the operating temperature. Derating of Rated Current Rated Derating (%) TOKO Products Inductors for Power Lines Notice (Rating) 100 50 0 0 85 TOKO Products Inductors for General Circuits Operating Temperature (°C) 118 125 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQW18CN_00 Series 0603 (1608) inch (mm) Packaging Minimum Code Packaging D ø180mm Paper Taping 4000 J ø330mm Paper Taping 10000 B Packing in Bulk 500 0.4±0.1 (in mm) Inductors for General Circuits Quantity 0.8±0.15 1.6±0.15 0.4±0.1 (0.2) 0.8±0.15 Appearance/Dimensions Inductance Inductance Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.) LQW18CN4N9D00p 4.9nH ±0.5nH 10MHz 2600mA 0.015Ω 2300MHz LQW18CN15NJ00p 15nH ±5% 10MHz 2200mA 0.025Ω 2000MHz LQW18CN33NJ00p 33nH ±5% 10MHz 1700mA 0.035Ω 1800MHz LQW18CN55NJ00p 55nH ±5% 10MHz 1500mA 0.045Ω 1600MHz LQW18CN85NJ00p 85nH ±5% 10MHz 1400mA 0.060Ω 1380MHz LQW18CNR10K00p 100nH ±10% 10MHz 1000mA 0.10Ω 1260MHz LQW18CNR12J00p 120nH ±5% 10MHz 1100mA 0.085Ω 1200MHz LQW18CNR16J00p 160nH ±5% 10MHz 1000mA 0.10Ω 900MHz LQW18CNR21J00p 210nH ±5% 10MHz 800mA 0.15Ω 720MHz LQW18CNR27J00p 270nH ±5% 10MHz 750mA 0.16Ω 660MHz LQW18CNR33J00p 330nH ±5% 10MHz 630mA 0.25Ω 600MHz LQW18CNR39J00p 390nH ±5% 10MHz 620mA 0.28Ω 570MHz LQW18CNR47J00p 470nH ±5% 10MHz 500mA 0.45Ω 555MHz LQW18CNR56J00p 560nH ±5% 10MHz 450mA 0.48Ω 540MHz LQW18CNR65J00p 650nH ±5% 10MHz 430mA 0.52Ω 510MHz Operating temp. range (Self-temp. rise not included): -40 to 85°C Class of Magnetic Shield: No Shield TOKO Products Inductors for Power Lines Part Number RF Inductors Rated Value (p: packaging code) For reflow soldering only *S.R.F.: Self-Resonant Frequency TOKO Products Inductors for General Circuits Continued on the following page. 119 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 120 Inductance-Frequency Characteristics (Typ.) Impedance-Frequency Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQH31CN_03 Series 1206 (3216) inch (mm) Packaging 2.3±0.2 1.8±0.2 1.6±0.2 Packaging K ø330mm Embossed Taping 7500 L ø180mm Embossed Taping 2000 Quantity 1.6±0.2 3.2±0.3 0.7min. Minimum Code Inductors for General Circuits Appearance/Dimensions 0.7min. (in mm) Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQH31CNR12M03p 0.12μH ±20% 1MHz 970mA 0.08Ω±40% 250MHz LQH31CNR22M03p 0.22μH ±20% 1MHz 850mA 0.10Ω±40% 250MHz LQH31CNR47M03p 0.47μH ±20% 1MHz 700mA 0.15Ω±40% 180MHz LQH31CN1R0M03p 1.0μH ±20% 1MHz 510mA 0.28Ω±30% 100MHz LQH31CN2R2M03p 2.2μH ±20% 1MHz 430mA 0.41Ω±30% 50MHz LQH31CN4R7M03p 4.7μH ±20% 1MHz 340mA 0.65Ω±30% 31MHz LQH31CN100K03p 10μH ±10% 1MHz 230mA 1.3Ω±30% 20MHz LQH31CN220K03p 22μH ±10% 1MHz 160mA 3.0Ω±30% 14MHz LQH31CN470K03p 47μH ±10% 1MHz 100mA 8.0Ω±30% 10MHz LQH31CN101K03p 100μH ±10% 1MHz 80mA 12.0Ω±30% 7MHz Operating temp. range (Self-temp. rise not included): -40 to 85°C Class of Magnetic Shield: No Shield *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±10% of initial inductance value. When rated current is applied to the products, the temperature rise caused by selfgenerated heat shall be limited to 35°C max. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines Part Number RF Inductors Rated Value (p: packaging code) Continued on the following page. 121 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 122 Impedance-Frequency Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQH32CN_23 Series 1210 (3225) inch (mm) Appearance/Dimensions Packaging Fig. 1 2.5±0.2 2.5±0.2 2.0±0.2 3.2±0.3 Minimum Code Packaging K ø330mm Embossed Taping 7500 L ø180mm Embossed Taping 2000 Quantity A 2.5±0.2 Inductors for General Circuits 2.5±0.2 2.5±0.2 A: 2.8 max. * Please refer to dimension A for LQH32CN_33 (2R2M, 4R7M, 100K) types. (See Fig. 1) 0.9±0.3 0.9±0.3 (in mm) Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQH32CN1R0M23p 1.0μH ±20% 1MHz 800mA 0.09Ω±30% 96MHz LQH32CN2R2M23p 2.2μH ±20% 1MHz 600mA 0.13Ω±30% 64MHz LQH32CN4R7M23p 4.7μH ±20% 1MHz 450mA 0.2Ω±30% 43MHz LQH32CN100K23p 10μH ±10% 1MHz 300mA 0.44Ω±30% 26MHz LQH32CN220K23p 22μH ±10% 1MHz 250mA 0.71Ω±30% 19MHz LQH32CN470K23p 47μH ±10% 1MHz 170mA 1.3Ω±30% 15MHz LQH32CN101K23p 100μH ±10% 1MHz 100mA 3.5Ω±30% 10MHz LQH32CN221K23p 220μH ±10% 1MHz 70mA 8.4Ω±30% 6.8MHz LQH32CN331K23p 330μH ±10% 1MHz 60mA 10.0Ω±30% 5.6MHz LQH32CN391K23p 390μH ±10% 1MHz 60mA 17Ω±30% 5.0MHz LQH32CN471K23p 470μH ±10% 1kHz 60mA 19Ω±30% 5.0MHz LQH32CN561K23p 560μH ±10% 1kHz 60mA 22.0Ω±30% 5.0MHz Operating temp. range (Self-temp. rise not included): -40 to 85°C Class of Magnetic Shield: No Shield *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines Part Number RF Inductors Rated Value (p: packaging code) Continued on the following page. 123 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 124 Impedance-Frequency Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQH32CN_33 Series 1210 (3225) inch (mm) Appearance/Dimensions Packaging Fig. 1 2.5±0.2 2.5±0.2 2.0±0.2 3.2±0.3 Minimum Code Packaging K ø330mm Embossed Taping 7500 L ø180mm Embossed Taping 2000 Quantity A 2.5±0.2 Inductors for General Circuits 2.5±0.2 2.5±0.2 A: 2.8 max. * Please refer to dimension A for LQH32CN_33 (2R2M, 4R7M, 100K) types. (See Fig. 1) 0.9±0.3 0.9±0.3 (in mm) Part Number Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQH32CNR15M33p 0.15μH ±20% 1MHz 1450mA 0.028Ω±30% 400MHz LQH32CNR27M33p 0.27μH ±20% 1MHz 1250mA 0.034Ω±30% 250MHz LQH32CNR47M33p 0.47μH ±20% 1MHz 1100mA 0.042Ω±30% 150MHz LQH32CN1R0M33p 1.0μH ±20% 1MHz 1000mA 0.06Ω±30% 100MHz LQH32CN2R2M33p 2.2μH ±20% 1MHz 790mA 0.097Ω±30% 64MHz LQH32CN4R7M33p 4.7μH ±20% 1MHz 650mA 0.15Ω±30% 43MHz LQH32CN100K33p 10μH ±10% 1MHz 450mA 0.3Ω±30% 26MHz RF Inductors Rated Value (p: packaging code) Operating temp. range (Self-temp. rise not included): -40 to 85°C Class of Magnetic Shield: No Shield When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines *S.R.F.: Self-Resonant Frequency Continued on the following page. 125 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 126 Impedance-Frequency Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQH32CN_53 Series 1210 (3225) inch (mm) Packaging 2.5±0.2 1.55±0.15 2.5±0.2 A A Minimum Code Packaging K ø330mm Embossed Taping 7500 L ø180mm Embossed Taping 2000 Quantity Inductors for General Circuits Appearance/Dimensions 2.5±0.2 3.2±0.3 A : 2.8 max. 0.9±0.3 0.9±0.3 (in mm) Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQH32CN1R0M53p 1.0μH ±20% 1MHz 1000mA 0.060Ω±30% 100MHz LQH32CN2R2M53p 2.2μH ±20% 1MHz 790mA 0.097Ω±30% 64MHz LQH32CN3R3M53p 3.3μH ±20% 1MHz 710mA 0.12Ω±30% 50MHz LQH32CN4R7M53p 4.7μH ±20% 1MHz 650mA 0.15Ω±30% 43MHz LQH32CN6R8M53p 6.8μH ±20% 1MHz 540mA 0.25Ω±30% 32MHz LQH32CN100K53p 10μH ±10% 1MHz 450mA 0.30Ω±30% 26MHz LQH32CN150K53p 15μH ±10% 1MHz 300mA 0.58Ω±30% 26MHz LQH32CN220K53p 22μH ±10% 1MHz 250mA 0.71Ω±30% 19MHz LQH32CN330K53p 33μH ±10% 1MHz 200mA 1.1Ω±30% 17MHz LQH32CN470K53p 47μH ±10% 1MHz 170mA 1.3Ω±30% 15MHz LQH32CN680K53p 68μH ±10% 1MHz 130mA 2.2Ω±30% 12MHz LQH32CN101K53p 100μH ±10% 1MHz 100mA 3.5Ω±30% 10MHz Operating temp. range (Self-temp. rise not included): -40 to 85°C Class of Magnetic Shield: No Shield *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines Part Number RF Inductors Rated Value (p: packaging code) Continued on the following page. 127 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 128 Impedance-Frequency Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQH32DN_23 Series 1210 (3225) inch (mm) Appearance/Dimensions Packaging 2.5±0.2 3.2±0.3 0.9±0.3 Minimum Code Packaging K ø330mm Embossed Taping 7500 L ø180mm Embossed Taping 2000 Quantity Inductors for General Circuits 2.0±0.2 2.5±0.2 2.5±0.2 (in mm) 0.9±0.3 Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) Operating temp. range LQH32DN1R0M23p 1.0μH ±20% 1MHz 800mA 0.09Ω±30% 96MHz -40 to 105°C LQH32DN2R2M23p 2.2μH ±20% 1MHz 600mA 0.13Ω±30% 64MHz -40 to 105°C LQH32DN3R3M23p 3.3μH ±20% 1MHz 530mA 0.20Ω±30% 50MHz -40 to 105°C LQH32DN4R7M23p 4.7μH ±20% 1MHz 450mA 0.20Ω±30% 43MHz -40 to 105°C LQH32DN100K23p 10μH ±10% 1MHz 300mA 0.44Ω±30% 26MHz -40 to 105°C LQH32DN220K23p 22μH ±10% 1MHz 250mA 0.71Ω±30% 19MHz -40 to 105°C LQH32DN390K23p 39μH ±10% 1MHz 200mA 1.2Ω±30% 16MHz -40 to 105°C LQH32DN470K23p 47μH ±10% 1MHz 170mA 1.3Ω±30% 15MHz -40 to 105°C LQH32DN680K23p 68μH ±10% 1MHz 130mA 2.2Ω±30% 12MHz -40 to 105°C LQH32DN101K23p 100μH ±10% 1MHz 100mA 3.5Ω±30% 10MHz -40 to 105°C LQH32DN151K23p 150μH ±10% 1MHz 80mA 5.1Ω±30% 8.0MHz -40 to 105°C LQH32DN221K23p 220μH ±10% 1MHz 70mA 8.4Ω±30% 6.8MHz -40 to 105°C LQH32DN331K23p 330μH ±10% 1MHz 60mA 10.0Ω±30% 5.6MHz -40 to 105°C LQH32DN391K23p 390μH ±10% 1MHz 60mA 17Ω±30% 5MHz -40 to 85°C LQH32DN471K23p 470μH ±10% 1kHz 60mA 19Ω±30% 5MHz -40 to 85°C LQH32DN561K23p 560μH ±10% 1kHz 60mA 22Ω±30% 5MHz -40 to 85°C TOKO Products Inductors for Power Lines Part Number RF Inductors Rated Value (p: packaging code) Class of Magnetic Shield: No Shield For reflow soldering only *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value. TOKO Products Inductors for General Circuits Continued on the following page. 129 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 130 Inductance-Frequency Characteristics (Typ.) Impedance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQH32DN_53 Series 1210 (3225) inch (mm) Packaging 2.5±0.2 2.0±0.2 2.5±0.2 3.2±0.3 0.9±0.3 Minimum Code Packaging K ø330mm Embossed Taping 7500 L ø180mm Embossed Taping 2000 Quantity Inductors for General Circuits Appearance/Dimensions 2.5±0.2 (in mm) 0.9±0.3 Inductance Inductance Test Frequency Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQH32DN1R0M53p 1.0μH ±20% 1MHz 1000mA 0.060Ω±30% 100MHz LQH32DN2R2M53p 2.2μH ±20% 1MHz 790mA 0.097Ω±30% 64MHz LQH32DN3R3M53p 3.3μH ±20% 1MHz 710mA 0.12Ω±30% 50MHz LQH32DN4R7M53p 4.7μH ±20% 1MHz 650mA 0.15Ω±30% 43MHz LQH32DN6R8M53p 6.8μH ±20% 1MHz 540mA 0.25Ω±30% 32MHz LQH32DN100K53p 10μH ±10% 1MHz 450mA 0.30Ω±30% 26MHz LQH32DN150K53p 15μH ±10% 1MHz 300mA 0.58Ω±30% 26MHz LQH32DN220K53p 22μH ±10% 1MHz 250mA 0.71Ω±30% 19MHz LQH32DN330K53p 33μH ±10% 1MHz 200mA 1.1Ω±30% 17MHz LQH32DN470K53p 47μH ±10% 1MHz 170mA 1.3Ω±30% 15MHz LQH32DN680K53p 68μH ±10% 1MHz 130mA 2.2Ω±30% 12MHz LQH32DN101K53p 100μH ±10% 1MHz 100mA 3.5Ω±30% 10MHz Operating temp. range: -40 to 105°C Class of Magnetic Shield: No Shield For reflow soldering only *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines Part Number RF Inductors Rated Value (p: packaging code) Continued on the following page. 131 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 132 Impedance-Frequency Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQH43CN_03 Series 1812 (4532) inch (mm) Appearance/Dimensions Packaging 3.2±0.2 Packaging L ø180mm Embossed Taping Minimum Quantity 500 3.2±0.2 4.5±0.3 1.0min. Code Inductors for General Circuits 2.6±0.2 3.6±0.2 1.0min. (in mm) Inductance Inductance Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.) LQH43CN1R0M03p 1.0μH ±20% 1MHz 1080mA 0.08Ω 100MHz LQH43CN1R5M03p 1.5μH ±20% 1MHz 1000mA 0.09Ω 85MHz LQH43CN2R2M03p 2.2μH ±20% 1MHz 900mA 0.11Ω 60MHz LQH43CN3R3M03p 3.3μH ±20% 1MHz 800mA 0.13Ω 47MHz LQH43CN4R7M03p 4.7μH ±20% 1MHz 750mA 0.15Ω 35MHz LQH43CN6R8M03p 6.8μH ±20% 1MHz 720mA 0.20Ω 30MHz LQH43CN100K03p 10μH ±10% 1MHz 650mA 0.24Ω 23MHz LQH43CN150K03p 15μH ±10% 1MHz 570mA 0.32Ω 20MHz LQH43CN220K03p 22μH ±10% 1MHz 420mA 0.6Ω 15MHz LQH43CN330K03p 33μH ±10% 1MHz 310mA 1.0Ω 12MHz LQH43CN470K03p 47μH ±10% 1MHz 280mA 1.1Ω 10MHz LQH43CN680K03p 68μH ±10% 1MHz 220mA 1.7Ω 8.4MHz LQH43CN101K03p 100μH ±10% 1MHz 190mA 2.2Ω 6.8MHz LQH43CN151K03p 150μH ±10% 1MHz 130mA 3.5Ω 5.5MHz LQH43CN221K03p 220μH ±10% 1MHz 110mA 4.0Ω 4.5MHz LQH43CN331K03p 330μH ±10% 1MHz 100mA 6.8Ω 3.6MHz LQH43CN471K03p 470μH ±10% 1kHz 90mA 8.5Ω 3.0MHz TOKO Products Inductors for Power Lines Part Number RF Inductors Rated Value (p: packaging code) Operating temp. range (Self-temp. rise not included): -40 to 85°C Class of Magnetic Shield: No Shield *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value. TOKO Products Inductors for General Circuits Continued on the following page. 133 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 134 Inductance-Frequency Characteristics (Typ.) Impedance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQH43CN_33 Series 1812 (4532) inch (mm) Appearance/Dimensions Packaging 3.2±0.2 Packaging L ø180mm Embossed Taping Minimum Quantity 500 3.2±0.2 4.5±0.3 1.0min. Code Inductors for General Circuits 2.6±0.2 3.6±0.2 1.0min. (in mm) Part Number Inductance Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQH43CNR56M33p 0.56μH ±20% 1MHz 2950mA 0.023Ω±30% 160MHz LQH43CNR82M33p 0.82μH ±20% 1MHz 2800mA 0.027Ω±30% 130MHz LQH43CN1R0M33p 1.0μH ±20% 1MHz 2600mA 0.032Ω±30% 110MHz LQH43CN1R5M33p 1.5μH ±20% 1MHz 2450mA 0.036Ω±30% 80MHz LQH43CN1R8M33p 1.8μH ±20% 1MHz 2300mA 0.042Ω±30% 70MHz LQH43CN2R2M33p 2.2μH ±20% 1MHz 2100mA 0.047Ω±30% 60MHz LQH43CN2R7M33p 2.7μH ±20% 1MHz 1800mA 0.053Ω±30% 50MHz LQH43CN3R3M33p 3.3μH ±20% 1MHz 1650mA 0.076Ω±30% 47MHz LQH43CN3R9M33p 3.9μH ±20% 1MHz 1600mA 0.082Ω±30% 40MHz RF Inductors Rated Value (p: packaging code) Class of Magnetic Shield: No Shield *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±20% of initial inductance value. When rated current is applied to the products, the temperature rise caused by selfgenerated heat shall be limited to 40°C max. Inductance-Current Characteristics (Typ.) TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines Operating temp. range (Self-temp. rise not included): -40 to 85°C Continued on the following page. 135 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 136 Impedance-Frequency Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQH55DN_03 Series 2220 (5750) inch (mm) Packaging 5.0±0.3 4.7±0.3 5.0±0.3 Minimum Code Packaging K ø330mm Embossed Taping 1500 L ø180mm Embossed Taping 350 Quantity Inductors for General Circuits Appearance/Dimensions 5.7±0.3 1.3 min. 1.3 min. (in mm) Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQH55DNR12M03p 0.12μH ±20% 1MHz 6.0A 0.007Ω±40% 450MHz LQH55DNR27M03p 0.27μH ±20% 1MHz 5.3A 0.010Ω±40% 300MHz LQH55DNR47M03p 0.47μH ±20% 1MHz 4.8A 0.013Ω±40% 200MHz LQH55DN1R0M03p 1.0μH ±20% 1MHz 4.0A 0.019Ω±40% 150MHz LQH55DN1R5M03p 1.5μH ±20% 1MHz 3.7A 0.022Ω±40% 110MHz LQH55DN2R2M03p 2.2μH ±20% 1MHz 3.2A 0.029Ω±40% 80MHz LQH55DN3R3M03p 3.3μH ±20% 1MHz 2.9A 0.036Ω±40% 40MHz LQH55DN4R7M03p 4.7μH ±20% 1MHz 2.7A 0.041Ω±40% 30MHz LQH55DN6R8M03p 6.8μH ±20% 1MHz 2.0A 0.074Ω±40% 25MHz LQH55DN100M03p 10μH ±20% 1MHz 1.7A 0.093Ω±40% 20MHz LQH55DN150M03p 15μH ±20% 1MHz 1.4A 0.15Ω±40% 17MHz LQH55DN220M03p 22μH ±20% 1MHz 1.2A 0.19Ω±40% 15MHz LQH55DN330M03p 33μH ±20% 1MHz 0.9A 0.32Ω±40% 12MHz LQH55DN470M03p 47μH ±20% 1MHz 0.8A 0.40Ω±40% 10MHz LQH55DN680M03p 68μH ±20% 1MHz 0.64A 0.67Ω±40% 7.6MHz LQH55DN101M03p 100μH ±20% 100kHz 0.56A 0.86Ω±40% 6.5MHz LQH55DN151M03p 150μH ±20% 100kHz 0.42A 1.9Ω±40% 5.0MHz LQH55DN221M03p 220μH ±20% 100kHz 0.32A 2.4Ω±40% 4.0MHz LQH55DN331M03p 330μH ±20% 100kHz 0.27A 4.4Ω±40% 3.1MHz LQH55DN471M03p 470μH ±20% 100kHz 0.24A 5.4Ω±40% 2.4MHz LQH55DN681M03p 680μH ±20% 100kHz 0.19A 8.1Ω±40% 1.9MHz LQH55DN102M03p 1000μH ±20% 10kHz 0.15A 10.3Ω±40% 1.7MHz LQH55DN222M03p 2200μH ±20% 10kHz 0.10A 21.5Ω±40% 1.2MHz LQH55DN472M03p 4700μH ±20% 10kHz 0.07A 43.6Ω±40% 0.8MHz LQH55DN103M03p 10000μH ±20% 10kHz 0.05A 100Ω±40% 0.5MHz Operating temp. range (Self-temp. rise not included): -40 to 80°C Class of Magnetic Shield: No Shield For reflow soldering only *S.R.F.: Self-Resonant Frequency TOKO Products Inductors for Power Lines Inductance TOKO Products Inductors for General Circuits Part Number RF Inductors Rated Value (p: packaging code) When rated current is applied to the products, inductance will be within ±40% of initial inductance value. When rated current is applied to the products, the temperature rise caused by selfgenerated heat shall be limited to 40°C max. Continued on the following page. 137 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 138 Inductance-Frequency Characteristics (Typ.) Impedance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQH66SN_03 Series 2525 (6363) inch (mm) Appearance/Dimensions Packaging 6.3±0.3 Minimum Code Packaging K ø330mm Embossed Taping 1500 L ø180mm Embossed Taping 350 Quantity Inductors for General Circuits 4.7±0.3 6.3±0.3 6.3±0.3 1.3 min. 1.3 min. (in mm) Inductance Test Frequency Rated Current DC Resistance S.R.F.* (min.) LQH66SNR27M03p 0.27μH ±20% 1MHz 6.0A 0.007Ω±40% 300MHz LQH66SNR68M03p 0.68μH ±20% 1MHz 5.3A 0.010Ω±40% 180MHz LQH66SN1R0M03p 1.0μH ±20% 1MHz 4.7A 0.013Ω±40% 150MHz LQH66SN1R5M03p 1.5μH ±20% 1MHz 3.8A 0.016Ω±40% 110MHz LQH66SN2R2M03p 2.2μH ±20% 1MHz 3.3A 0.019Ω±40% 80MHz LQH66SN3R3M03p 3.3μH ±20% 1MHz 2.6A 0.022Ω±40% 40MHz LQH66SN4R7M03p 4.7μH ±20% 1MHz 2.2A 0.025Ω±40% 30MHz LQH66SN6R8M03p 6.8μH ±20% 1MHz 1.8A 0.029Ω±40% 25MHz LQH66SN100M03p 10μH ±20% 1MHz 1.6A 0.036Ω±40% 20MHz LQH66SN150M03p 15μH ±20% 1MHz 1.3A 0.069Ω±40% 17MHz LQH66SN220M03p 22μH ±20% 1MHz 1.1A 0.087Ω±40% 15MHz LQH66SN330M03p 33μH ±20% 1MHz 0.86A 0.14Ω±40% 12MHz LQH66SN470M03p 47μH ±20% 1MHz 0.76A 0.17Ω±40% 10MHz LQH66SN680M03p 68μH ±20% 1MHz 0.60A 0.29Ω±40% 7.6MHz LQH66SN101M03p 100μH ±20% 100kHz 0.52A 0.36Ω±40% 6.5MHz LQH66SN151M03p 150μH ±20% 100kHz 0.42A 0.63Ω±40% 5.0MHz LQH66SN221M03p 220μH ±20% 100kHz 0.35A 0.79Ω±40% 4.0MHz LQH66SN331M03p 330μH ±20% 100kHz 0.28A 1.8Ω±40% 3.2MHz LQH66SN471M03p 470μH ±20% 100kHz 0.24A 2.2Ω±40% 2.5MHz LQH66SN681M03p 680μH ±20% 100kHz 0.20A 3.9Ω±40% 2.0MHz 1.7MHz LQH66SN102M03p 1000μH ±20% 10kHz 0.16A 4.9Ω±40% LQH66SN222M03p 2200μH ±20% 10kHz 0.10A 9.4Ω±40% 1.2MHz LQH66SN472M03p 4700μH ±20% 10kHz 0.07A 19.5Ω±40% 0.8MHz LQH66SN103M03p 10000μH ±20% 10kHz 0.05A 39.7Ω±40% 0.5MHz Operating temp. range (Self-temp. rise not included): -40 to 80°C Class of Magnetic Shield: Ferrite Core For reflow soldering only *S.R.F.: Self-Resonant Frequency When rated current is applied to the products, inductance will be within ±40% of initial inductance value. When rated current is applied to the products, the temperature rise caused by selfgenerated heat shall be limited to 40°C max. TOKO Products Inductors for Power Lines Inductance TOKO Products Inductors for General Circuits Part Number RF Inductors Rated Value (p: packaging code) Continued on the following page. 139 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 140 Inductance-Frequency Characteristics (Typ.) Impedance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM18FN_00 Series 0603 (1608) inch (mm) Appearance/Dimensions Packaging Minimum Code Packaging D ø180mm Paper Taping 4000 J ø330mm Paper Taping 10000 B Packing in Bulk 1000 Quantity 0.8±0.1 1.6±0.1 (in mm) Inductors for General Circuits 0.8±0.1 0.3±0.2 Part Number Inductance Inductance Test Frequency Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQM18FN1R0M00p 1.0μH ±20% 1MHz 150mA 0.20Ω±30% 120MHz LQM18FN2R2M00p 2.2μH ±20% 1MHz 120mA 0.40Ω±30% 80MHz LQM18FN4R7M00p 4.7μH ±20% 1MHz 80mA 0.60Ω±30% 50MHz LQM18FN100M00p 10μH ±20% 1MHz 50mA 0.90Ω±30% 30MHz RF Inductors Rated Value (p: packaging code) Operating temp. range (Self-temp. rise not included): -55 to 125°C Class of Magnetic Shield: Ferrite Core *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency TOKO Products Inductors for Power Lines Inductance-Current Characteristics (Typ.) Continued on the following page. TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) 141 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 142 Impedance-Frequency Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM21DN_00 Series 0805 (2012) inch (mm) Packaging (Inductance: 1.0µH to 10µH) 0.5±0.3 t 2.0±0.2 1.25±0.2 Minimum Code Packaging D ø180mm Paper Taping 4000 J ø330mm Paper Taping 10000 B Packing in Bulk 1000 Quantity Packaging (Inductance: 22µH to 47µH) (in mm) Dimension of t Inductance: 1.0 to 10μH 0.85±0.2 Inductance: 22 to 47μH 1.25±0.2 Minimum Code Packaging K ø330mm Embossed Taping 10000 L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity Inductors for General Circuits Appearance/Dimensions Part Number Inductance Inductance Test Frequency Rated Current (Itemp)* Max. of DC Resistance S.R.F.* (min.) LQM21DN1R0N00p 1.0μH ±30% 1MHz 60mA 0.10Ω 75MHz LQM21DN2R2N00p 2.2μH ±30% 1MHz 40mA 0.17Ω 50MHz LQM21DN4R7N00p 4.7μH ±30% 1MHz 30mA 0.30Ω 35MHz LQM21DN100N00p 10μH ±30% 1MHz 15mA 0.50Ω 24MHz LQM21DN220N00p 22μH ±30% 1MHz 13mA 0.65Ω 16MHz LQM21DN470N00p 47μH ±30% 1MHz 7.0mA 1.20Ω 7.5MHz RF Inductors Rated Value (p: packaging code) Operating temp. range (Self-temp. rise not included): -40 to 85°C Class of Magnetic Shield: Ferrite Core *Itemp: Rated Current based on Temperature rise Inductance-Current Characteristics (Typ.) Continued on the following page. TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines *S.R.F.: Self-Resonant Frequency 143 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 144 Impedance-Frequency Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM21FN_00 Series 0805 (2012) inch (mm) Packaging (Inductance: 1.0µH to 2.2µH) Minimum Code Packaging D ø180mm Paper Taping 4000 J ø330mm Paper Taping 10000 B Packing in Bulk 1000 Quantity t 0.5±0.3 1.25±0.2 2.0±0.2 Packaging (Inductance: 4.7µH to 47µH) (in mm) Dimension of t Inductance: 1.0 to 2.2μH 0.85±0.2 Inductance: 4.7 to 47μH 1.25±0.2 Minimum Code Packaging K ø330mm Embossed Taping 10000 L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity Inductors for General Circuits Appearance/Dimensions Part Number Inductance Inductance Test Frequency Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQM21FN1R0N00p 1.0μH ±30% 1MHz 220mA 0.20Ω±30% 105MHz LQM21FN2R2N00p 2.2μH ±30% 1MHz 150mA 0.28Ω±30% 70MHz LQM21FN4R7N00p 4.7μH ±30% 1MHz 80mA 0.30Ω±30% 25MHz LQM21FN100N00p 10μH ±30% 1MHz 60mA 0.50Ω±30% 15MHz LQM21FN220N00p 22μH ±30% 1MHz 13mA 0.35Ω±30% 15MHz LQM21FN470N00p 47μH ±30% 1MHz 7.0mA 0.60Ω±30% 7.5MHz RF Inductors Rated Value (p: packaging code) Operating temp. range (Self-temp. rise not included): -40 to 85°C Class of Magnetic Shield: Ferrite Core *Itemp: Rated Current based on Temperature rise Inductance-Current Characteristics (Typ.) Continued on the following page. TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) TOKO Products Inductors for Power Lines *S.R.F.: Self-Resonant Frequency 145 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 146 Impedance-Frequency Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM21FN_70 Series 0805 (2012) inch (mm) Packaging 1.25±0.2 0.5±0.3 Minimum Code Packaging L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity Inductors for General Circuits Appearance/Dimensions 1.25±0.2 2.0±0.2 (in mm) Part Number Inductance Inductance Test Frequency Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQM21FN4R7M70p 4.7μH ±20% 1MHz 120mA 0.35Ω±30% 25MHz LQM21FN100M70p 10μH ±20% 1MHz 100mA 0.60Ω±30% 15MHz Operating temp. range (Self-temp. rise not included): -55 to 125°C RF Inductors Rated Value (p: packaging code) Class of Magnetic Shield: Ferrite Core *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency TOKO Products Inductors for Power Lines Inductance-Current Characteristics (Typ.) Continued on the following page. TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) 147 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 148 Impedance-Frequency Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines LQM21FN_80 Series 0805 (2012) inch (mm) Packaging 1.25±0.2 0.5±0.3 Minimum Code Packaging K ø330mm Embossed Taping 10000 L ø180mm Embossed Taping 3000 B Packing in Bulk 1000 Quantity 1.25±0.2 2.0±0.2 (in mm) Inductors for General Circuits Appearance/Dimensions Part Number Inductance Inductance Test Frequency Rated Current (Itemp)* DC Resistance S.R.F.* (min.) LQM21FN4R7M80p 4.7μH ±20% 1MHz 120mA 0.18Ω±30% 25MHz LQM21FN100M80p 10μH ±20% 1MHz 100mA 0.30Ω±30% 15MHz Operating temp. range (Self-temp. rise not included): -55 to 125°C RF Inductors Rated Value (p: packaging code) Class of Magnetic Shield: Ferrite Core *Itemp: Rated Current based on Temperature rise *S.R.F.: Self-Resonant Frequency TOKO Products Inductors for Power Lines Inductance-Current Characteristics (Typ.) Continued on the following page. TOKO Products Inductors for General Circuits Inductance-Frequency Characteristics (Typ.) 149 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. TOKO Products Inductors for General Circuits TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines Continued from the preceding page. 150 Impedance-Frequency Characteristics (Typ.) O05E.pdf Apr.28,2017 O05E.pdf Inductors for Power Lines !Caution/Notice !Caution Rating 1. About the Rated Current Do not use products beyond the rated current as this may create excessive heat and deteriorate the insulation resistance. 2. About Excessive Surge Current Surge current (pulse current or rush current) greater than the specified rated current applied to the product may cause a critical failure, such as an open circuit or burnout caused by excessive temperature rise. Please contact us in advance if applying a surge current. Notice Storage and Operating Condition Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. 1. Storage Period The LQM series should be used within 6 months; the other products should be used within 12 months. Check solderability if this period is exceeded. 2. Storage Conditions (1) Store products in a warehouse in compliance with the following conditions: Temperature: -10 to +40°C. Humidity: 15 to 85% (relative humidity) Do not subject products to rapid changes in temperature and humidity. Do not store them in a chemical atmosphere such as one containing sulfurous acid gas or alkaline gas. This will prevent electrode oxidation, which causes poor solderability and possible corrosion of inductors. (2) Do not store products in bulk packaging to prevent collision among inductors, which causes core chipping and wire breakage. (3) Store products on pallets to protect from humidity, dust, etc. (4) Avoid heat shock, vibration, direct sunlight, etc. Inductors for Power Lines Apr.28,2017 Inductors for General Circuits • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. RF Inductors !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. LQH_C/D/H/M/N/P series a To prevent breaking the wire, avoid touching with sharp materials, such as tweezers or the bristles of a cleaning brush, to the wire wound portion of this product. a To prevent breaking the core, avoid applying excessive mechanical shock to products mounted on the board. a Temperature may rise up to max. 40°C when applying the rated current to Inductors for Power Lines. Use caution regarding the temperature rating of the circuit board and components around the chip Inductors. LQM series a There is the possibility that magnetism may change the inductance value. Do not use a magnet or tweezers with magnetism when handling chip inductors. (The tip of the tweezers should be molded with resin or pottery.) a When the excessive current over rated current is applied, it may cause the inductance value to change due to magnetism. Do not apply excessive vibration or mechanical shock to products. TOKO Products Inductors for General Circuits This item is designed to have sufficient strength, but handle with care to avoid chipping or breaking its ceramic structure. LQW_C series a To prevent breaking the wire, avoid touching with sharp materials, such as tweezers or other materials such as the bristles of a cleaning brush, to the wire wound portion. a To prevent breaking the core, avoid applying excessive mechanical shock to products mounted on the board. a In some mounting machines, when picking up components, a support pin pushes the components up from the bottom of the base tape. In this case, please remove the support pin. The support pin may damage the components and break the wire. a In rare cases, the laser recognition cannot recognize this component. Please contact us when you use laser recognizion. (There is no problem with the permeation and reflection type.) a The product temperature rises about 40°C maximum when the permissible current is applied to LQW15C/LQW18C. Please use caution regarding the temperature of the substrate and air around the part. TOKO Products Inductors for Power Lines Handling Continued on the following page. 151 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. RF Inductors Inductors for General Circuits Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Inductors for Power Lines !Caution/Notice Continued from the preceding page. When coating products with resin, the relatively high resin curing stress may change inductance values. For exterior coating, select resin carefully so that electrical and mechanical performance of the product is not affected. Prior to use, please evaluate reliability with the product mounted in your application set. (LQW, LQH series) An open circuit issue may occur by mechanical stress caused by the resin, amount/cured shape of resin, or operating conditions, etc. Some resins containing impurities or chloride may possibly generate chlorine by hydrolysis under some operating conditions, causing corrosion of the inductor wire and leading to an open circuit. (LQH2HP_GR/JR, LQH2MPN_GR, LQH3NP_GR/JR/ME, LQH44P_GR, LQH5BPN_38 Series) When rated current is applied to the products, Inductance will be within ±30% of specified inductance value range. (Other LQH_P Series except for LQH2HP_G0 Series) When rated current is applied to the products, Inductance will be within ±30% of nominal inductance value. a Rated Current Based on Temperature Rise For LQH2MC series and LQH_P series, rated current is set to keep the temperature rise caused by self heating 40°C or less. For other Inductors for Power Lines, please refer to individual specifications. After mounting products on a substrate, do not apply any stress to the product caused by bending or twisting the substrate when cropping the substrate, inserting and removing a connector from the substrate, or tightening a screw to the substrate. Excessive mechanical stress may cause cracking in the Product. Bending Twisting Measuring Method Measuring Method of Inductance/Q 1. Residual elements and stray elements of test fixtures can be described by F-parameter as shown in the following: TOKO Products Inductors for Power Lines I1 Zm I2 A B C D V2 V1 Test Head Test fixture TOKO Products Inductors for General Circuits Zx V1 I1 = A B V2 C D I2 Product 2. The impedance of chip inductors (chip coils) Zx and measured value Zm can be described by input/output current/voltage. Zm = 152 O05E.pdf Apr.28,2017 V1 I1 , Zx = 3. Thus, the relation between Zx and Zm is shown in the following: Zm - β Zx = α 1 - ZmΓ where, α = D / A = 1 β = B / D = Zsm - (1 - Yom Zsm) Zss Γ = C / A = Yom Zsm: measured impedance of short chip Zss: residual impedance of short chip* Yom: measured admittance when opening the fixture *Residual inductance of short chip V2 Residual Inductance Series I2 0.556nH LQW15C 0.771nH LQW18C 4. Lx and Qx should be calculated with the following equation. Lx = Im (Zx) 2πf , Qx = Im (Zx) Re (Zx) Lx: Inductance of chip Inductors (chip coils) Qx: Q of chip Inductors (chip coils) f: Measuring frequency O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Inductors for Power Lines Soldering and Mounting 1. Standard Land Pattern Dimensions A high Q value is achieved when the PCB electrode land pattern is designed so that it does not project beyond the chip Inductor's (chip coil's) electrode. Land Pattern + Solder Resist Solder Resist Land Pattern (in mm) c LQM18F/18P a d b LQM18P_CH/FH/GH LQM21P_CA/CH/EH/GH LQM2MP_GH LQM2HP_CH/EH/GH/JH 2.2-2.6 0.7 Reflow 1.8-2.0 0.7 − 1.2 3.0-4.0 1.0 − 0.8 2.4 1.8 − LQM2HP 1.6 3.0 1.5 − LQM31P 2.0 4.2-5.2 1.2 − LQM32P 1.9 3.6 2.7 − LQH2MC 0.8 2.6 1.0 − LQH31C 1.0 4.5 1.5 − LQH32P 1.3 3.8 2.0 − LQH44P_P0 1.3 4.4 3.0 − LQH44P_J0/GR 1.5 4.4 2.7 − LQH5BP 1.8 5.5 4.1 1.85 LQH55D/66S 2.0 8.0 3.5 − LQW15CN_00 0.4 1.4 0.6 − LQW15C_10 0.4 1.4 0.66 − LQW18C 0.7 2.2 1.0 − LQM18P_FH LQM18P_GH LQM21P_CA Rated Current (A) 0-0.7 0.7-1.05 0-0.7 0.7-1.7 0-0.7 0.7-1.15 − a b c 0.7 1.8-2.0 0.7 0.7 1.8-2.0 0.7 0.7 1.8-2.0 0.7 1.2 3.0-4.0 1.0 0-1.0 chip coil LQM21P_CH d d LQM2MP LQM18P_CH LQM21P_EH LQM21P_GH 1.0-1.5 LQM2MP_GH LQM2HP_CH LQM2HP_GH 70μm 0.7 0.7 1.1 0.7 0.7 0.7 0.7 0.7 1.4 0.7 0.7 0.7 0.7 0.7 1.2 0.7 0.7 1.3 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.5 1.0 0-1.0 1.0 1.0 1.0 1.5 1.0 1.0 3.0 1.5 1.0 1.8 1.8 1.8 2.4 1.8 1.8 2.5-5.0 5.0 2.4 1.8 0-1.5 1.5 1.5 1.5 3.0 1.5 1.5 1.5 1.5 1.5 1.0-1.5 1.2 3.0-4.0 1.0 1.5-2.5 1.5-3.0 0.8 1.6 2.4 3.0 1.8 1.5 1.5-3.0 3.0 1.5 1.5 3.0-5.0 5.0 3.0 1.5 0-1.5 1.5 1.5 1.5 2.4 1.5 1.5 4.4 3.6 2.4 1.5 1.5 1.5 2.4 1.5 1.5 3.6 2.4 1.5 1.5-2.6 1.6 1.6 3.0 3.0 1.5 1.5 3.3-4.2 0-1.6 LQM2HP_JH 35μm 0.7 2.0 0-1.5 LQM2HP_EH 18μm 1.5 1.2 3.0-4.0 1.0 0-1.5 a Land Pad Thickness and Dimension d 1.5- 1.5-3.1 b c LQM21D/21F/21P Part Number c b a Flow 1.6-2.4 2.4-3.5 1.6 3.0 1.5 RF Inductors Part Number TOKO Products Inductors for Power Lines LQM18F/18P (Except for LQM18P_CH/FH/GH) LQM21D/21F/21P (Except for LQM21P_CA/CH/ EH/GH) LQM2MP (Except for LQM2MP_GH) LQM2HP (Except for LQM2HP_CH/ EH/GH/JH) LQM31P LQM32P LQH2MC LQH31C LQH32P LQH44P_P0/J0/GR LQH5BP LQH55D/66S LQW15CN_00 LQW15C_10 LQW18C Inductors for General Circuits Standard Land Dimensions TOKO Products Inductors for General Circuits Series Inductors for Power Lines Apr.28,2017 Attention should be paid to potential magnetic coupling effects when using the Inductor (coil) as a resonator. Continued on the following page. 153 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. O05E.pdf Apr.28,2017 Inductors for Power Lines Soldering and Mounting Continued from the preceding page. Land Pattern + Solder Resist Land Pattern Solder Resist (in mm) Series Standard Land Dimensions LQH2HP (Except for LQH2HP_GR) 1.4 Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 0.8 3.0 1.25 2.5 5.5 2.0 LQH32C/D 1.0 Inductors for General Circuits 2.0 LQH2HP_GR/JR 0.7 0.45 2.4 0.7 0.45 3.3 0.75 LQH3NP (Except for LQH3NP_JR/ GR/ME) 0.75 RF Inductors 1.0 1.3 1.0 1.15 1.0 1.15 3.3 2.7 LQH3NP_JR/GR/ME 1.4 7.5 LQH43C LQH43P 3.0 1.5 TOKO Products Inductors for Power Lines 3.0 1.5 1.5 1.5 Attention should be paid to potential magnetic coupling effects when using the Inductor (coil) as a resonator. TOKO Products Inductors for General Circuits 2. Standard Soldering Conditions (1) Soldering method Chip Inductors (Chip coils) can be flow or reflow soldered. Please contact Murata regarding other soldering methods. For LQH2MC/2MP/2HP/3NP/32D/32P/43PB/ 44P/5BP/55D/66S, LQM2MP_DH/EH/GH/ 2HP_CH/EH/GH/JH/18P_CH/DH/FH/GH/ 21P_CA/CH/EH/GH/32P, LQW15C/18C series, please use reflow soldering. Solder: Use Sn-3.0Ag-0.5Cu solder. Flux: Use rosin-based flux, but not strongly acidic flux (with chlorine content exceeding 0.2wt%). Do not use water-soluble flux. The flux used for the LQW15C/18C series should be a rosin-based flux that includes a middle activator equivalent to 0.06wt% to 0.1wt% chlorine. For additional mounting methods, please contact Murata. Continued on the following page. 154 O05E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Apr.28,2017 Inductors for Power Lines Inductors for Power Lines Soldering and Mounting Continued from the preceding page. (2) Soldering profile oFlow Soldering profile (Sn-3.0Ag-0.5Cu solder) Temperature (°C) T3 T2 t2 Heating T1 Limit Profile time (s) Standard Profile Pre-heating Series Temp. (T1) Heating Time. (t1) Temp. (T2) Time. (t2) Limit Profile Heating Cycle of flow Temp. (T3) Time. (t2) Cycle of flow LQM18F/18P (Except for CH/DH/FH/GH) LQM21D/21F/21P (Except for CA/CH/EH/GH) LQM2MP (Except for DH/EH/GH) LQM2HP (Except for CH/EH/GH/JH) LQM31P LQH31C 150°C 60s min. 250°C 4 to 6s 2 times max. 265±3°C 5s max. 2 times max. LQH32C LQH43C/43PN 150°C 60s min. 250°C 4 to 6s 2 times max. 265±3°C 5s max. 1 time RF Inductors Pre-heating t1 Inductors for General Circuits Standard Profile oReflow Soldering profile (Sn-3.0Ag-0.5Cu solder) T4 Temperature (°C) T2 T1 T3 t1 Standard Profile t2 90±30s time (s) Standard Profile Series Heating Temp. (T1) Time. (t1) Limit Profile Peak temperature (T2) Cycle of reflow Time. (t2) Peak temperature (T4) Cycle of reflow Heating Temp. (T3) LQM18F/18P LQM21D/21F/21P/2MP/2HP LQM31P/32P LQH2MC, LQH2HP LQH31C LQH32D_23 (Except for 391/471/561) LQH32D_53 LQH3NP/32P/43P/44P/5BP LQW15C/18C 220°C 30 to 60s 245±3°C 2 times max. 230°C 60s max. 260°C/10s 2 times max. LQH32C LQH32D_23 (391/471/561 only) LQH43C LQH55D, LQH66S 220°C 30 to 60s 245±3°C 2 times max. 230°C 60s max. 260°C/10s 1 time TOKO Products Inductors for General Circuits Limit Profile Pre-heating TOKO Products Inductors for Power Lines 180 150 Continued on the following page. 155 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. TOKO Products Inductors for Power Lines RF Inductors Inductors for General Circuits Inductors for Power Lines • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O05E.pdf Apr.28,2017 Inductors for Power Lines Soldering and Mounting Continued from the preceding page. (3) Reworking with a Soldering Iron Preheating at 150°C for 1 minute is required. Do not directly touch the ceramic element with the tip of the soldering iron. The reworking soldering conditions are as follows: Soldering iron power output: 80W max. Temperature of soldering iron tip: 350°C Diameter of soldering iron end: 3.0mm max. Soldering time: within 3 s Please keep the fix time with the soldering iron within 2 times. 3. Mounting Instructions (1) Land Pattern Dimensions Large lands reduce the Q of the mounted chip. Also, large protruding land areas (bordered by lines having the dimensions "c" and "d" shown) cause floating and electrode leaching. Solder Resist Land c d (2) Land Pattern Designing (LQH series, LQW series) Please follow the recommended patterns. Otherwise, their performance, which includes electrical performance or solderability, may be affected, or result in “position shift” in the soldering process. (3) Magnetic Coupling Since some chip inductors (chip coils) are constructed like an open magnetic circuit, narrow spacing between inductors (coils) may cause magnetic coupling. LQM, LQH66S, and LQH_P series have a magnetically shielded structure. The structure makes their coupling coefficient smaller than that of conventional chip inductors (chip coils). (4) PCB Warping The PCB should be designed so that products are not subjected to mechanical stress caused by warping the board. Magnetic Coupling Products should be located in a sideways direction (Length: a