LQP03TN15NH02D

Reference Only Spec No.JELF243C-0015T-01 P.1/12 CHIP COIL (CHIP INDUCTORS) LQP03TN□□□□02D REFERENCE SPECIFICATION 1.Scope This reference specification applies to LQP03TN_02 series, Chip coil (Chip Inductors). 2.Part Numbering (ex) LQ P 03 T N 0N6 B 0 2 Product ID Structure Dimension Applications Category Inductance Tolerance Features (L×W) and Characteristics D Electrode Packaging D:Taping *B:Bulk *Bulk packing also available. (A product is put in the plastic bag under the taping conditions.) 3.Rating ・Operating Temperature Range. –55°C to +125°C (Ambient temperature: Rated current can be handled in this temperature range.) ・Storage Temperature Range. –55°C to +125°C Customer Part Number Inductance MURATA Part Number (nH) LQP03TN0N6B02D LQP03TN0N6C02D LQP03TN0N7B02D LQP03TN0N7C02D LQP03TN0N8B02D LQP03TN0N8C02D LQP03TN0N9B02D LQP03TN0N9C02D LQP03TN1N0B02D LQP03TN1N0C02D LQP03TN1N1B02D LQP03TN1N1C02D LQP03TN1N2B02D LQP03TN1N2C02D LQP03TN1N3B02D LQP03TN1N3C02D LQP03TN1N4B02D LQP03TN1N4C02D LQP03TN1N5B02D LQP03TN1N5C02D LQP03TN1N6B02D LQP03TN1N6C02D LQP03TN1N7B02D LQP03TN1N7C02D LQP03TN1N8B02D LQP03TN1N8C02D LQP03TN1N9B02D LQP03TN1N9C02D LQP03TN2N0B02D LQP03TN2N0C02D LQP03TN2N1B02D LQP03TN2N1C02D LQP03TN2N2B02D LQP03TN2N2C02D LQP03TN2N3B02D LQP03TN2N3C02D LQP03TN2N4B02D LQP03TN2N4C02D Tolerance Q (min) 0.6 DC Resistance (Ω max) 0.07 Self Resonant Frequency (MHz) Min. *Typ. Rated Current (mA) 850 20000 0.7 0.08 0.8 800 18000 0.9 20000 1.0 0.10 1.1 750 17000 1.2 1.3 16000 1.4 1.5 B:±0.1nH C:±0.2nH 14 19600 17900 20000 1.6 0.15 15000 1.7 19100 1.8 17700 600 15100 1.9 12500 14800 2.0 13900 2.1 11000 13400 2.2 12900 2.3 0.20 2.4 MURATA MFG.CO., LTD 10000 12200 500 Spec No.JELF243C-0015T-01 Customer Part Number Reference Only Inductance MURATA Part Number (nH) LQP03TN2N5B02D LQP03TN2N5C02D LQP03TN2N6B02D LQP03TN2N6C02D LQP03TN2N7B02D LQP03TN2N7C02D LQP03TN2N8B02D LQP03TN2N8C02D LQP03TN2N9B02D LQP03TN2N9C02D LQP03TN3N0B02D LQP03TN3N0C02D LQP03TN3N1B02D LQP03TN3N1C02D LQP03TN3N2B02D LQP03TN3N2C02D LQP03TN3N3B02D LQP03TN3N3C02D LQP03TN3N4B02D LQP03TN3N4C02D LQP03TN3N5B02D LQP03TN3N5C02D LQP03TN3N6B02D LQP03TN3N6C02D LQP03TN3N7B02D LQP03TN3N7C02D LQP03TN3N8B02D LQP03TN3N8C02D LQP03TN3N9B02D LQP03TN3N9C02D LQP03TN4N0B02D LQP03TN4N0C02D LQP03TN4N1B02D LQP03TN4N1C02D LQP03TN4N2B02D LQP03TN4N2C02D LQP03TN4N3H02D LQP03TN4N3J02D LQP03TN4N7H02D LQP03TN4N7J02D LQP03TN5N1H02D LQP03TN5N1J02D LQP03TN5N6H02D LQP03TN5N6J02D LQP03TN6N2H02D LQP03TN6N2J02D LQP03TN6N8H02D LQP03TN6N8J02D LQP03TN7N5H02D LQP03TN7N5J02D LQP03TN8N2H02D LQP03TN8N2J02D LQP03TN9N1H02D LQP03TN9N1J02D Tolerance Q (min) DC Resistance (Ω max) P.2/12 Self Resonant Frequency (MHz) Min. *Typ. 12200 2.5 10000 2.6 0.20 2.7 13300 13000 9500 2.9 12400 3.0 11900 3.1 11300 8000 3.2 0.25 10600 10900 B:±0.1nH C:±0.2nH 450 9400 3.4 7000 3.5 9600 3.6 9500 6000 3.7 0.30 5700 3.9 8200 8100 14 3.8 400 7900 8600 4.0 8400 4.1 5300 8600 4.2 4.3 9800 0.40 4.7 4400 8800 5.1 4200 8600 350 8000 5.6 6.2 500 11800 2.8 3.3 Rated Current (mA) 4000 H:±3％ J:±5％ 7900 3900 8000 7.5 3700 6700 8.2 3600 6600 3300 5900 6.8 0.60 0.70 9.1 MURATA MFG.CO., LTD 300 250 Spec No.JELF243C-0015T-01 Customer Part Number Reference Only Inductance MURATA Part Number (nH) LQP03TN10NH02D LQP03TN10NJ02D LQP03TN11NH02D LQP03TN11NJ02D LQP03TN12NH02D LQP03TN12NJ02D LQP03TN13NH02D LQP03TN13NJ02D LQP03TN15NH02D LQP03TN15NJ02D LQP03TN16NH02D LQP03TN16NJ02D LQP03TN18NH02D LQP03TN18NJ02D LQP03TN20NH02D LQP03TN20NJ02D LQP03TN22NH02D LQP03TN22NJ02D LQP03TN24NH02D LQP03TN24NJ02D LQP03TN27NH02D LQP03TN27NJ02D LQP03TN30NH02D LQP03TN30NJ02D LQP03TN33NH02D LQP03TN33NJ02D LQP03TN36NH02D LQP03TN36NJ02D LQP03TN39NH02D LQP03TN39NJ02D LQP03TN43NH02D LQP03TN43NJ02D LQP03TN47NH02D LQP03TN47NJ02D LQP03TN51NH02D LQP03TN51NJ02D LQP03TN56NH02D LQP03TN56NJ02D LQP03TN62NH02D LQP03TN62NJ02D LQP03TN68NH02D LQP03TN68NJ02D LQP03TN75NJ02D LQP03TN75NH02D LQP03TN82NH02D LQP03TN82NJ02D LQP03TN91NH02D LQP03TN91NJ02D LQP03TNR10H02D LQP03TNR10J02D LQP03TNR11H02D LQP03TNR11J02D LQP03TNR12H02D LQP03TNR12J02D Tolerance Q (min) DC Resistance (Ω max) 0.70 10 P.3/12 Self Resonant Frequency (MHz) Min. *Typ. 3200 Rated Current (mA) 5800 14 11 0.80 12 5400 2900 0.70 13 0.80 4300 2600 15 0.70 3800 16 0.95 3700 0.80 3400 18 12 2.30 3600 22 1.90 3300 150 3200 24 27 2.30 2000 2.95 1700 2900 140 2700 30 33 2600 H:±3％ 2400 J:±5％ 3.00 39 43 200 2200 20 36 250 1500 2200 9 47 120 3.60 1300 3.90 1200 2000 51 56 1800 62 8 68 100 1100 1500 75 1000 1400 900 1300 82 91 8 10 100 80 110 120 MURATA MFG.CO., LTD 12 800 1100 Spec No.JELF243C-0015T-01 Customer Part Number Reference Only Inductance MURATA Part Number (nH) LQP03TNR13H02D LQP03TNR13J02D LQP03TNR15H02D LQP03TNR15J02D LQP03TNR16H02D LQP03TNR16J02D LQP03TNR18H02D LQP03TNR18J02D LQP03TNR20H02D LQP03TNR20J02D LQP03TNR22H02D LQP03TNR22J02D LQP03TNR24H02D LQP03TNR24J02D LQP03TNR27H02D LQP03TNR27J02D ＊Typical value is actual performance. Q (min) DC Resistance (Ω max) Tolerance P.4/12 Self Resonant Frequency (MHz) Min. *Typ. Rated Current (mA) 960 130 150 9 650 11 600 13 500 880 80 840 160 180 H:±3％ J:±5％ 200 790 5 220 750 710 630 240 15 270 70 60 450 580 4. Testing Conditions 《Unless otherwise specified》 Temperature : Ordinary Temperature / 15°C to 35°C Humidity : Ordinary Humidity / 25%(RH) to 85 %(RH) 《In case of doubt》 Temperature : 20°C ± 2°C Humidity : 60%(RH) to 70 %(RH) Atmospheric Pressure : 86kPa to 106 kPa 5. Appearance and Dimensions (0.6nH to 62nH) (68nH to 270nH) 0.3±0.03 0.3±0.03 ■Unit Mass (Typical value) 0.0002g 0.6±0.03 0.6±0.03 0.3±0.03 0.15±0.05 0.3±0.03 0.15±0.05 MURATA MFG.CO., LTD (in mm) Spec No.JELF243C-0015T-01 Reference Only P.5/12 6. Marking Polarity Marking :white Coloring side Polarity Marking 7.Electrical Performance No. 7.1 Item Inductance Specification Inductance shall meet item 3. 7.2 Q Q shall meet item 3. Test Method Measuring Equipment: KEYSIGHT E4991A or equivalent Measuring Frequency: (0.6nH～30nH) 500MHz (33nH～120nH) 300MHz (130nH～270nH) 100MHz Measuring Condition: Test signal level / about 0dBm Electrical length / 10mm Weight / about 1N to 5N Measuring Fixture: KEYSIGHT 16197A Position coil under test as shown in below and contact coil with each terminal by adding weight. Coloring side should be a topside, and should be in the direction of the fixture for position of chip coil. ↑ Polarity Marking 7.3 7.4 7.5 DC Resistance Self Resonant Frequency(S.R.F) Rated Current DC Resistance shall meet item 3. S.R.F shall meet item 3. Self temperature rise shall be limited to 25°C max. Measuring Method:See P.12 Measuring Equipment:Digital multi meter Measuring Equipment: KEYSIGHT N5230A or equivalent The rated current is applied. MURATA MFG.CO., LTD Spec No.JELF243C-0015T-01 Reference Only P.6/12 8.Mechanical Performance No. 8.1 Item Shear Test Specification Chip coil shall not be damaged after tested as test method. Test Method Substrate:Glass-epoxy substrate Land 0.3 0.3 0.9 (in mm) Force:2N Hold Duration:5 s±1 s Applied Direction: Parallel to PCB. Chip coil F Substrate 8.2 Bending Test Chip coil shall not be damaged after tested as test method. Substrate:Glass-epoxy substrate (100mm×40mm×0.8mm) Speed of Applying Force:1mm /s Deflection:1mm Hold Duration:30 s Pressure jig R340 F Deflection 45 8.3 Vibration Appearance:No damage Inductance Change: within ±10% 8.4 Solderability The electrode shall be at least 90% covered with new solder coating. 8.5 Resistance to Soldering Heat Appearance:No damage Inductance Change: within ±10% 45 Product (in mm) Substrate:Glass-epoxy substrate Oscillation Frequency: 10Hz to 2000Hz to 10Hz for 20 min Total amplitude 1.5 mm or Acceleration amplitude 196 m/s2 whichever is smaller. Testing Time: A period of 2h in each of 3 mutually perpendicular directions. Flux: Ethanol solution of rosin 25(wt)% (Immersed for 5s to 10s) Solder:Sn-3.0Ag-0.5Cu Pre-Heating:150°C±10°C / 60s to 90s Solder Temperature:240°C±5°C Immersion Time:3s±1s Flux: Ethanol solution of rosin 25(wt)% (Immersed for 5s to 10s) Solder:Sn-3.0Ag-0.5Cu Pre-Heating:150°C±10°C / 60s to 90s Solder Temperature:260°C±5°C Immersion Time:5s±1s Then measured after exposure in the room condition for 24h±2h. MURATA MFG.CO., LTD Reference Only Spec No.JELF243C-0015T-01 P.7/12 9.Environmental Performance It shall be soldered on the substrate. No. Item Specification 9.1 Heat Resistance Appearance:No damage Inductance Change: within ±10% 9.2 Cold Resistance 9.3 Humidity 9.4 Temperature Cycle Test Method Substrate:Glass-epoxy substrate Temperature:125°C Time:1000h (+48h,-0h) Then measured after exposure in the room condition for 24h±2h. Substrate:Glass-epoxy substrate Temperature:-55°C Time:1000 h (+48h,-0h) Then measured after exposure in the room condition for 24h±2h. Substrate:Glass-epoxy substrate Temperature:40°C±2°C Humidity:90%(RH) to 95%(RH) Time:1000 h(+48h,-0h) Then measured after exposure in the room condition for 24h±2h. Substrate:Glass-epoxy substrate 1 cycle: 1 step: -55°C / 30min±3 min 2 step:Ordinary temp. / 10~15 min 3 step: 125°C / 30min±3 min 4 step: Ordinary temp. / 10~15 min Total of 10 cycles Then measured after exposure in the room condition for 24h±2h. 10.Specification of Packaging 10.1 Appearance and Dimensions of paper tape (8mm-wide) 4.0±0.1 +0.1 φ1.5 -0 1.75±0.1 ※A Polarity Marking 8.0±0.2 2.0±0.05 3.5±0.05 2.0±0.05 0.35±0.03 Direction of feed ※A 0.55 max. (in mm) 0N6～62N、R13～R27； 0.67±0.03 68N～R12； 0.65±0.03 10.2 Specification of Taping (1) Packing quantity (standard quantity) 15,000 pcs. / reel (2) Packing Method Products shall be packed in the cavity of the base tape and sealed by cover tape. (3) Sprocket hole The sprocket holes are to the right as the tape is pulled toward the user. (4) Spliced point Base tape and Cover tape has no spliced point. (5) Missing components number Missing components number within 0.1 % of the number per reel or 1 pc. , whichever is greater, and are not continuous. The Specified quantity per reel is kept. MURATA MFG.CO., LTD Reference Only Spec No.JELF243C-0015T-01 P.8/12 10.3 Pull Strength Cover tape 5N min 10.4 Peeling off force of cover tape Speed of Peeling off Cover tape 300mm/min 0.1N to 0.6N (minimum value is typical) Peeling off force F 165°to 180゜ Base tape 10.5 Dimensions of Leader-tape, Trailer and Reel There shall be leader-tape ( top tape and empty tape) and trailer-tape (empty tape) as follows. Trailer 160 min. 2.0±0.5 Leader Label 190 min. Empty tape 210 min. Cover tape φ 13.0±0.2 +1 φ 60 -0 φ 21.0±0.8 9.0 +1 -0 Direction of feed 13.0±1.4 (in mm) +0 φ 180 -3 10.6 Marking for reel Customer part number, MURATA part number, Inspection number(∗1) , RoHS Marking (∗2), Quantity etc ･･･ □□ OOOO ××× ∗1) (1) (2) (3) (1) Factory Code (2) Date First digit : Year / Last digit of year Second digit : Month / Jan. to Sep. → 1 to 9, Oct. to Dec. → O,N,D Third, Fourth digit : Day (3) Serial No. ∗2) ROHS – Y (△) (1) (2) (1) RoHS regulation conformity parts. (2) MURATA classification number 10.7 Marking for Outside package (corrugated paper box) Customer name, Purchasing order number, Customer part number, MURATA part number, RoHS Marking (∗2) ,Quantity, etc ･･･ 10.8 Specification of Outer Case Label H D W Outer Case Dimensions (mm) W D H 186 186 93 Standard Reel Quantity in Outer Case (Reel) 5 ∗ Above Outer Case size is typical. It depends on a quantity of an order. MURATA MFG.CO., LTD Reference Only Spec No.JELF243C-0015T-01 P.9/12 11. ！ Caution Limitation of Applications Please contact us before using our products for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property. (1) Aircraft equipment (6) Transportation equipment (vehicles, trains, ships, etc.) (7) Traffic signal equipment (2) Aerospace equipment (3) Undersea equipment (8) Disaster prevention / crime prevention equipment (4) Power plant control equipment (9) Data-processing equipment (5) Medical equipment (10) Applications of similar complexity and /or reliability requirements to the applications listed in the above 12. Notice Products can only be soldered with reflow. This product is designed for solder mounting. Please consult us in advance for applying other mounting method such as conductive adhesive. 12.1 Land pattern designing Chip Coil c Land a b c Solder resist 0.2~0.3 0.8~0.9 0.2~0.3 (in mm) a b 12.2 Flux, Solder ・ Use rosin-based flux. Don’t use highly acidic flux with halide content exceeding 0.2(wt)% (chlorine conversion value). Don’t use water-soluble flux. ・ Use Sn-3.0Ag-0.5Cu solder. ・ Standard thickness of solder paste : 100μm~150μm. 12.3 Reflow soldering conditions ・ Pre-heating should be in such a way that the temperature difference between solder and product surface is limited to 150°C max. Cooling into solvent after soldering also should be in such a way that the temperature difference is limited to 100°C max. Insufficient pre-heating may cause cracks on the product, resulting in the deterioration of products quality. ・ Standard soldering profile and the limit soldering profile is as follows. The excessive limit soldering conditions may cause leaching of the electrode and / or resulting in the deterioration of product quality. ・Reflow soldering profile Temp. (℃) 260℃ 245℃±3℃ 230℃ 220℃ Limit Profile 180 150 Standard Profile 30s～60s 60s max. 90s±30s Pre-heating Heating Peak temperature Cycle of reflow Time. (s) Standard Profile Limit Profile 150°C～180°C 、90s±30s above 220°C､30s～60s above 230°C､60s max. 245°C±3°C 260°C,10s 2 times 2 times MURATA MFG.CO., LTD Reference Only Spec No.JELF243C-0015T-01 P.10/12 12.4 Reworking with soldering iron The following conditions must be strictly followed when using a soldering iron. Pre-heating Tip temperature Soldering iron output Tip diameter Soldering time Time 150°C,1 min 350°C max. 80W max. φ3mm max. 3(+1,-0)s 2 times Note : Do not directly touch the products with the tip of the soldering iron in order to prevent the crack on the products due to the thermal shock. 12.5 Solder Volume ･ Solder shall be used not to be exceeded the upper limits as shown below. Upper Limit Recommendable t 1/3T≦t≦T T : thickness of product Accordingly increasing the solder volume, the mechanical stress to Chip is also increased. Exceeding solder volume may cause the failure of mechanical or electrical performance. 12.6 Attention regarding P.C.B. bending The following shall be considered when designing and laying out P.C.B.'s. (1) P.C.B. shall be designed so that products are not subject to the mechanical stress due to warping the board. ［Products direction］ a b 〈 Poor example 〉 Products shall be located in the sideways direction (Length:ａ＜b) to the mechanical stress. 〈 Good example 〉 (2) Products location on P.C.B. separation Seam b C B D A Slit Products (A,B,C,D) shall be located carefully so that products are not subject to the mechanical stress due to warping the board. Because they may be subjected the mechanical stress in order of A＞C＞B ≅ D. Length:a< b a 12.7 Cleaning Conditions Products shall be cleaned on the following conditions. (1) Cleaning temperature shall be limited to 60°C max.(40°C max for IPA) (2) Ultrasonic cleaning shall comply with the following conditions with avoiding the resonance phenomenon at the mounted products and P.C.B. Power : 20 W / l max. Frequency : 28kHz to 40kHz Time : 5 min max. (3) Cleaner 1. Alcohol type cleaner Isopropyl alcohol (IPA) 2. Aqueous agent PINE ALPHA ST-100S (4) There shall be no residual flux and residual cleaner after cleaning. In the case of using aqueous agent, products shall be dried completely after rinse with de-ionized water in order to remove the cleaner. (5) Other cleaning Please contact us. MURATA MFG.CO., LTD Spec No.JELF243C-0015T-01 Reference Only P.11/12 12.8 Resin coating When products are coated with resin, please contact us in advance. 12.9 Handling of a substrate (1)There is a possibility of chip cracking caused by PCBexpansion/contraction with heat, because stress on a chip is different depending on PCB material and structure. When the thermal expansion coefficient greatly differs between the board used for mounting and the chip, it will cause cracking of the chip due to the thermal expansion and contraction. The chip is assumed to be mounted on the PCB of glass-epoxy material, and we don't test with other PCB material which has different thermal expansion coefficient from Glass-epoxy. When other PCB materials are considered, please be sure to evaluate by yourself. (2)After mounting products on a substrate, do not apply any stress to the product caused by bending or twisting to the substrate when cropping the substrate, inserting and removing a connector from the substrate or tightening screw to the substrate. Excessive mechanical stress may cause cracking in the product. In case of the mounting on flexible PCB, there is a possibility of chip cracking caused by mechanical stress even from small bending or twisting. When the flexible PCB is considered, please be sure to evaluate by yourself. Bending Twisting 12.10 Storage and Handing Requirements (1) Storage period Use the products within 12 months after delivered. Solderability should be checked if this period is exceeded. (2) Storage conditions ・Products should be stored in the warehouse on the following conditions. Temperature ： -10°C ~ 40°C Humidity ： 15% to 85% relative humidity No rapid change on temperature and humidity. ・Products should not be stored on bulk packaging condition to prevent the chipping of the core and the breaking of winding wire caused by the collision between the products. ・Products should be stored on the palette for the prevention of the influence from humidity, dust and so on. ・Products should be stored in the warehouse without heat shock, vibration, direct sunlight and so on. (3) Handling Condition Care should be taken when transporting or handling product to avoid excessive vibration or mechanical shock. 13．! Note (1)Please make sure that your product has been evaluated in view of your specifications with our product being mounted to your product. (2)You are requested not to use our product deviating from the reference specifications. (3)The contents of this reference specification are subject to change without advance notice. Please approve our product specifications or transact the approval sheet for product specifications before ordering. MURATA MFG.CO., LTD Reference Only Spec No.JELF243C-0015T-01 P.12/12 (1) Residual elements and stray elements of test fixture can be described by F-parameter shown in following. I2 I1 Zm A B C D V2 V1 Test Head Test fixture Zx V1 = I1 A B C D V2 I2 Product (2) The impedance of chip coil Zx and measured value Zm can be described by input/output current/voltage. Zm= V1 I1 ， V2 Zx= I 2 (3) Thus,the relation between Zx and Zm is following; Zm-β where, α= D / A =1 Zx= α 1-ZmΓ β= B / D =Zsm-(1-Yom Zsm)Zss Γ= C / A =Yom Zsm:measured impedance of short chip Zss:residual impedance of short chip (0.480nH) Yom:measured admittance when opening the fixture (4) Lx and Qx shall be calculated with the following equation. Im(Zx) Im(Zx) Qx= Lx= 2πf ， Re(Zx) Lx :Inductance of chip coil Qx:Q of chip coil f :Measuring frequency MURATA MFG.CO., LTD