LXMS31ACNA-010

MAGICSTRAP® Technical Data Sheet Murata part number : LXMS31ACNA / LXMS31ACMD 1. General Descriptions Murata MAGICSTRAP® is an innovative RFID module with a wide range of RF features. It incorporates an industry standard IC. [Features] 1-1. Compliant to EPC global Class1Gen2 1-2. Ultra small package (3.2X1.6X0.55mm typ.) 1-3. Supports wide frequency range from 865MHz to 955MHz, allowing to cover all globally relevant UHF frequency bands with one single design. 1-4. Impedance transformation function for more accurate matching with various antenna designs - 4 different variants available, which allow perfect matching to antenna impedance 1-5. Both conductive material & non-conductive material can be used for connection to antenna. 1-6. Wide mechanical mounting tolerance for assembly into RFID tag or inlay 1-7. Fully Compatible with conventional SMT process and reflow soldering 1-8. Compatible with plastic molding process (150°C max. over 2 hours) 1-9. High ESD protection function 1-10. 100% green material for full RoHS compliance 1-11. Internal 512bit user memory available 2. Memory Capacity Parameter MAGICSTRAP® P/N LXMS31ACNA – 009. 010, 011, 012 EPC User TID Memory Memory Memory 512 bits 64 bits 512 bits 96 bits Up to 240 bits LXMS31ACMD – 141, 142, 143, 144 Up to 128 bits 3. Block Diagram Matching Circuit Analog F/E Controller Memory Integrated Circuit Nov. 2012 1 / 8 MAGICSTRAP® Technical Data Sheet Murata part number : LXMS31ACNA / LXMS31ACMD 4. Mechanical Information 4-1. Dimensions L T W T a b2 d [mm] Mark L W T a Dimensions 3.2±0.2 1.6±0.2 0.7 max. 1.25±0.1 Mark b1 b2 d - Dimensions 0.18±0.18 0.18±0.18 0.7±0.1 - b1 d 4-2. Recommended mounting pattern at antenna side for reflow soldering 1.75 0.25 [mm] 0.625 Land Solder Resist Nov. 2012 2 / 8 MAGICSTRAP® Technical Data Sheet Murata part number : LXMS31ACNA / LXMS31ACMD 4-3. Recommended mounting pattern at antenna side for the attachment by adhesive 2.25 0.25 [mm] 1.0 Mounting pad pattern 5. Electrical Performance 5-1. Frequency range 865 – 955 MHz 5-2. Minimum operating power -8dBm 5-3. Electrical characteristics at minimum operating power MAGICSTRAP® P/N Parameter (Ta=25℃, Unit : Ohm) LXMS31ACNA LXMS31ACNA LXMS31ACNA LXMS31ACNA - 009 - 010 - 011 - 012 LXMS31ACMD LXMS31ACMD LXMS31ACMD LXMS31ACMD - 141 - 142 - 143 - 144 @866.5 R 15 12 25 80 MHz X -45 -107 -200 -405 Impedance @915.0 R 25 12 25 80 value MHz X -45 -107 -200 -420 @953.0 R 30 9 20 60 MHz X -48 -105 -195 -425 Nov. 2012 3 / 8 MAGICSTRAP® Technical Data Sheet Murata part number : LXMS31ACNA / LXMS31ACMD 5-4. Impedance Measurement Method LXMS31 NETWORK ACNA/ACMD-*** ANALYZER 5-5. IC incorporated NXP G2XM (PNs LXMS31ACNA-009 to -012) Impinj Monza4QT (PNs LXMS31ACMD-141 to -144) 6. OPERATING TEMPERATURE -40 °C ~ +85 °C 7. RoHS compliance MAGICSTRAP® is compliant to RoHS directive. 8. Attachment of MAGICSTRAP® MAGICSTRAP® has electrodes at the bottom side which enable an inductive coupling with the antenna pad when using a non-conductive adhesive as well as making a conductive connection with antenna. 9. Tape and Reel Packing 9-1. Dimensions of Tape ( Plastic tape ) Nov. 2012 4 / 8 MAGICSTRAP® Technical Data Sheet Murata part number : LXMS31ACNA / LXMS31ACMD  Maximum cumulative tolerance ± 0.15 every 10 pitches  Reference value 9-2. Dimensions of Reel Nov. 2012 5 / 8 MAGICSTRAP® Technical Data Sheet Murata part number : LXMS31ACNA / LXMS31ACMD 9-3. Leader and Tail tape 9-4 Taping direction The tape for chips are wound clockwise, the feeding holes to the right side as the tape is pulled toward the user. 9-5 Quantity per reel Packaging unit :4000 pcs./ reel 9-6 Material : Base tape ……Plastic Reel ……Plastic Cover tape and cavity tape are made the anti-static processing. material 9-7 Strength/Peeling force Tear off strength against pulling of cover tape : 5 N min. Peeling of force : 0.7 N max. in the direction of peeling as shown below. Nov. 2012 6 / 8 MAGICSTRAP® Technical Data Sheet Murata part number : LXMS31ACNA / LXMS31ACMD 0.7 N max. 165 ~ 180 ° Cover tape Base tape 9-8 PACKAGE (Humidity proof Packing) Label 表示ラべル Desiccant 乾燥剤 Humidity 　湿度 Indicator インジケ－タ 表示ラベル Label 防湿梱包袋 Anti-humidity Plastic Bag Tape and reel must be sealed with the anti-humidity plastic bag. The bag contains the desiccant and the humidity inductor. 10. Ordering part number IC NXP G2XM Impinj Monza4QT User Memory Size 512 bits 512 bits Part number LXMS31ACNA–009 LXMS31ACMD–141 LXMS31ACNA–010 LXMS31ACMD–142 LXMS31ACNA–011 LXMS31ACMD–143 LXMS31ACNA–012 LXMS31ACMD–144 Each part number has different impedance value. Please refer “5-3. Electrical characteristics”. Nov. 2012 7 / 8 MAGICSTRAP® Technical Data Sheet Murata part number : LXMS31ACNA / LXMS31ACMD < Note > • This document is subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • Please refer to following URL for other usage of MAGICSTRAP® and our company RFID related products. URL : http://www.murata.com/products/rfid/index.html • For any inquiries/queries, please feel free to contact us. e-mail : magicstrap@ml.murata.co.jp Nov. 2012 8 / 8