UHF RFID Tag Data sheet
LXMSJZNCMF-198
1, General Descriptions
LXMSJZNCMF-198 is an innovative RFID module which
complies ISO18000-63 / EPC Global Gen2v2.
This product can be used as an ultra small tag and this can be
fit on any metal objects, non-metal objects, as well as
embedding into any objects by glue or adhesive and so on.
This can be used globally with high performance and reliability.
[Features]
-Small and Robust package design
-UHF band (865~928MHz)
-ISO18000-63 / EPC Global Gen2v2 Compliant
-Size is 1.2 x 1.2 x 0.55mm
-Using impinj MonzaR6
-Read range:10mm *Reference
-RoHS compliant
2, Block Diagram
Antenna
Analog F/E
Controller
Memory
Integrated Circuit
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
1
Rev1.3 June, 2019
UHF RFID Tag Data sheet
LXMSJZNCMF-198
3, Mechanical Information
[Dimension]
T
L
W
T
Unit:mm
Mark
Dimensions
L
1.2±0.15
W
1.2±0.15
T
0.55max.
4. Electrical Performance
4-1. Frequency range
865 – 928 MHz
4-2. IC / Memory size
Parameter
Description
IC
Impinj Monza R6
ISO/IEC 18000-63
Protocol
Memory
Remarks
EPC global Gen2 V2
EPC
Max 96 bit
Read & Write
TID
96 bit
Read Only
Reserved
memory
User
Data Retention Time
N/A
N/A
※50years
※Reference value
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
2
Rev1.3 June, 2019
Tamb = 22℃
UHF RFID Tag Data sheet
LXMSJZNCMF-198
5. Reading range (reference only)
Reading range varies by Output Power of Reader/Writer and an antenna.
UHF band(865~928MHz): 10mm
*Measurement setup
DUT
Reading range
Reader/Writer
Antenna
V750-BD50C04-JP
JGLX0918
(OMRON)
(Murata)
6. Absolute maximum ratings
Symbol
Parameter
Min
Max
Unit
Tstg
Storage temperature
-40
+85
℃
Tamb
Operating temperature
-40
+85
℃
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
3
Rev1.3 June, 2019
UHF RFID Tag Data sheet
LXMSJZNCMF-198
7. Packaging
7-1. Dimensions of tape
J
E
t
D
C
B
H
G
A
K
F
引き出し方向
Unit: mm
Symbol
A
B
C
D
E
F
Dimension 1.45±0.1
1.45±0.1
8.0±0.2
3.5±0.05
1.75±0.1
4.0±0.1
Symbol
G
H
J
K
t
Dimension
2.0±0.05
4.0±0.1
1.5+0.1
0.65±0.05
0.25±0.05
7-2. Dimensions of reel
a
d
b
c
Unit: mm
Symbol
a
b
c
d
e
Dimension
2.0+/-0.5
Φ13.0+/-0.2
9.0+/-0.3
(Φ60)
(Φ180)
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
4
Rev1.3 June, 2019
e
UHF RFID Tag Data sheet
LXMSJZNCMF-198
7-3. Taping Diagrams
[1] Feeding Hole :
As specified in7-1
[2] Hole for chip
:
As specified in 7-1
[3] Cover tape
:
50um in thickness
[4] Base tape
:
As specified in 7-1
Feeding Hole
Feeding Direction
Tag
Package chips
7-4. Leader and Tail tape
A
B
Components
C
Unit:mm
Symbol
Item
Minimum length
A
Tail
160
B
Leader no components
100
C
Leader with cover tape
400
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
5
Rev1.3 June, 2019
UHF RFID Tag Data sheet
LXMSJZNCMF-198
7-5 Taping direction
The tape for chips are wound clockwise.
The feeding holes will come on the right side when the tape is pulled to a user’s direction.
7-6. Quantity per reel
5,000 pcs
7-7. Minimum order quantity
5,000pcs
7-8. Material
Base and Cover tape : Plastic
Reel : Plastic
Base and Cover tape, Reel have an anti-ESD function.
7-9. Peeling force
0.1~1.0 N in the direction of peeling as shown below.
0.7
N max.
0.1~1.0
N
165 ~ 180 °
Cover tape
Base tape
8. Contact window
URL: http://www.murata.com/products/rfid
Email: magicstrap@murata.com
For any inquiries/queries, please feel free to contact us.
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
6
Rev1.3 June, 2019
UHF RFID Tag Data sheet
LXMSJZNCMF-198
NOTICE
1. Storage Conditions:
To avoid damaging, be sure to observe the following points.
- Store products where the ambient temperature is 15 to 35 °C and humidity 45 to 75% RH.
(Packing materials, In particular, may be deformed at the temperature over 40 °C.).
- Store products in non corrosive gas (Cl2, NH3,SO2, Nox, etc.).
- Stored products should be used within 6 months of receipt.
2. Handling Conditions:
Be careful in handling or transporting products because excessive stress or mechanical shock may break
products.
3. Operational Environment Conditions:
Products are designed to work under normal environmental conditions (ambient temperature, humidity and
pressure). Therefore, products have no problems to be used under the similar conditions to the
above-mentioned. However, if products are used under the following circumstances, it may damage products
and leakage of electricity and abnormal temperature may occur.
- In an atmosphere containing corrosive gas ( Cl2, NH3, SOx, NOx etc.).F
- In an atmosphere containing combustible and volatile gases.
- In a dusty environment.
- Direct sunlight
- Water splashing place.
- Humid place where water condenses.
- In a freezing environment.
If there are possibilities for products to be used under the preceding clause, consult with Murata before actual
use.
If static electricity is added to this product, degradation and destruction may be produced.
Please use it after consideration enough so that neither static electricity nor excess voltage is added at the time
of an assembly and measurement.
If product malfunctions may result in serious damage, including that to human life, alternative measures of the
operation and design must be taken to secure the safety.
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
7
Rev1.3 June, 2019
UHF RFID Tag Data sheet
LXMSJZNCMF-198
4. Cleaning Conditions:
If the cleaning will be applied, please check with Murata in advance since the product may degrade or get
broken.
5. Limitation of Applications:
Please contact us before using our products for the applications listed below which require especially high
reliability for the prevention of defects which might directly cause damage to the third party's life, body or
property.
(1) Aircraft equipment
(2) Aerospace equipment
(3) Undersea equipment
(4) Power plant control equipment
(5) Medical equipment
(6) Transportation equipment (vehicles, trains, ships, etc.)
(7) Traffic signal equipment
(8) Disaster prevention / crime prevention equipment
(9) Data-processing equipment
(10) Application of similar complexity and/or reliability requirements to the application listed in the above.
!
Note:
Please make sure that your product has been evaluated and confirmed against your specifications when our
product is attached to your product.
All the items and parameters in this product specification have been prescribed on the premise that our product
is used for the purpose, under the condition and in the environment agreed upon between you and us. You are
requested not to use our product deviating from such agreement.
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
8
Rev1.3 June, 2019