UHF RFID Tag Data sheet
LXMSJZNCMF-210
Scope
This Data sheet, is applied to passive UHF tag.
-Specific applications: To give ID (identification) to consumer product, consumer equipment, industrial
equipment and medical equipment (GHTF Class A and B) or its consumables for individual management by
using radio waves.
-Unsuitable Application: Applications listed in “Limitation of applications” in this Data sheet.
1, General Descriptions
LXMSJZNCMF-210 is an innovative RFID module which
complies ISO18000-63 / EPC Global Gen2v2.
This product can be used as an ultra small tag and this can be
fit on any metal objects, non-metal objects, as well as
embedding into any objects by glue or adhesive and so on.
This can be used globally with high performance and reliability.
[Features]
-Small and Robust package design
-UHF band (865~928MHz)
-ISO18000-63 / EPC Global Gen2v2 Compliant
-Size is 1.2 x 1.2 x 0.55mm
-Using impinj MonzaR6
-Read range:10mm *Reference
-RoHS compliant
2, Block Diagram
Antenna
Analog F/E
Controller
Memory
Integrated Circuit
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
1
Rev1.2 October, 2022
UHF RFID Tag Data sheet
LXMSJZNCMF-210
3, Mechanical Information
[Dimension]
T
L
W
T
Unit:mm
Mark
Dimensions
L
1.2±0.15
W
1.2±0.15
T
0.55max.
4. Electrical characteristics
4-1. Frequency range
865 – 928 MHz
4-2. IC / Memory size
Parameter
Description
IC
Impinj Monza R6
ISO/IEC 18000-63
Protocol
Memory
Remarks
EPC global Gen2 V2
EPC
Max 96 bit
Read & Write
TID
96 bit
Read Only
Reserved
memory
User
Data Retention Time
N/A
N/A
※50years
※Reference value
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
2
Rev1.2 October, 2022
Tamb = 22℃
UHF RFID Tag Data sheet
LXMSJZNCMF-210
5. Reading range (reference only)
Reading range varies by Output Power of Reader/Writer and an antenna.
UHF band(865~928MHz): 10mm
*Measurement setup
DUT
Reading range
Reader/Writer
Antenna
6. Absolute maximum ratings
Symbol
Parameter
Min
Max
Unit
Tstg
Storage temperature
-40
+85
℃
Tamb
Operating temperature
-40
+85
℃
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
3
Rev1.2 October, 2022
UHF RFID Tag Data sheet
LXMSJZNCMF-210
7. Packaging
7-1. Dimensions of tape
J
E
t
D
C
B
H
G
A
K
F
引き出し方向
Unit: mm
Symbol
A
B
C
D
E
F
Dimension 1.45±0.1
1.45±0.1
8.0±0.2
3.5±0.05
1.75±0.1
4.0±0.1
Symbol
G
H
J
K
t
Dimension
2.0±0.05
4.0±0.1
1.5+0.1
0.60±0.05
0.25±0.05
7-2. Dimensions of reel
a
d
b
c
Unit: mm
Symbol
a
b
c
d
e
Dimension
2.0+/-0.5
Φ13.0+/-0.2
9.0+/-0.3
(Φ60)
(Φ180)
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
4
Rev1.2 October, 2022
e
UHF RFID Tag Data sheet
LXMSJZNCMF-210
7-3.
Packing(Moisture-proof package)
Label
表示ラべル
Desiccant
乾燥剤
Humidity
湿度
インジケ-タ
Indicator
Moisture-proof
防湿梱包袋
package
Reel will be packed in moisture-proof package together with desiccant and humidity indicator.
After packing, the package will be heat-sealed.
7-4. Taping Diagrams
[1] Feeding Hole :
As specified in7-1
[2] Hole for chip
:
As specified in 7-1
[3] Cover tape
:
50um in thickness
[4] Base tape
:
As specified in 7-1
Feeding Hole
Feeding Direction
Tag
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
5
Rev1.2 October, 2022
UHF RFID Tag Data sheet
LXMSJZNCMF-210
Package chips
7-5. Leader and Tail tape
A
B
Components
C
Unit:mm
Symbol
Item
Minimum length
A
Tail
160
B
Leader no components
100
C
Leader with cover tape
400
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
6
Rev1.2 October, 2022
UHF RFID Tag Data sheet
LXMSJZNCMF-210
7-6 Taping direction
The tape for chips are wound clockwise.
The feeding holes will come on the right side when the tape is pulled to a user’s direction.
7-7. Quantity per reel
5,000 pcs
7-8. Minimum order quantity
5,000pcs
7-9. Material
Base and Cover tape : Plastic
Reel : Plastic
Base and Cover tape, Reel have an anti-ESD function.
7-10. Peeling force
0.1~1.0 N in the direction of peeling as shown below.
0.7
N max.
0.1~1.0
N
165 ~ 180 °
Cover tape
Base tape
8. Contact window
URL: http://www.murata.com/products/rfid
Email: magicstrap@murata.com
For any inquiries/queries, please feel free to contact us.
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
7
Rev1.2 October, 2022
UHF RFID Tag Data sheet
LXMSJZNCMF-210
NOTICE
1. Storage Conditions:
To avoid damaging, be sure to observe the following points.
-
The product shall be stored without opening the packing under the ambient temperature from 5 to 35
deg.C and humidity from 20 to 70%RH.
(Packing materials, in particular, may be deformed at the temperature over 40 deg.C.)
-
The product left more than 6 months after reception, it needs to be baked before use.
(Since adhesive tape, tape, and reel are not resistant to heat, baking with tape and reel is not possible. In
case baking is necessary, please place the product into a heat resistant container. Baking condition should
be 125deg.C, 24hours, once. )
-
The product shall be stored in non corrosive gas (Cl2, NH3, SO2, Nox, etc.).
-
Environment with high temperature or excessive temperature shift might cause dew condensation and
deterioration of product performance.
-
After the packing is opened, the product shall be stored at < 30 deg.C / < 60 %RH.
-
When the color of the indicator in the packing changed, the product shall be baked before use.
-
This product is applicable to MSL2 (Based on IPC/JEDEC J-STD-020)
2. Handling Conditions:
Be careful in handling or transporting products because excessive stress or mechanical shock may break
products.
Please see Appendix 1 for reference attachment condition in detail.
3. Operational Environment Conditions:
Products are designed to work under normal environmental conditions (ambient temperature, humidity and
pressure). Therefore, products have no problems to be used under the similar conditions to the
above-mentioned. However, if products are used under the following circumstances, it may damage products
and leakage of electricity and abnormal temperature may occur.
- In an atmosphere containing corrosive gas ( Cl2, NH3, SOx, NOx etc.).
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
8
Rev1.2 October, 2022
UHF RFID Tag Data sheet
LXMSJZNCMF-210
- In an atmosphere containing combustible and volatile gases.
- In a dusty environment.
- Direct sunlight
- Water splashing place.
- Humid place where water condenses.
- In a freezing environment.
If there are possibilities for products to be used under the preceding clause, consult with Murata before actual
use.
If static electricity is added to this product, degradation and destruction may be produced.
Please use it after consideration enough so that neither static electricity nor excess voltage is added at the
time of an assembly and measurement.
If product malfunctions may result in serious damage, including that to human life, alternative measures of the
operation and design must be taken to secure the safety.
4. Cleaning Conditions:
If the cleaning will be applied, please check with Murata in advance since the product may degrade or get
broken.
5. Limitation of Applications:
The products listed in the Data sheet (hereinafter the product(s) is called as the “Product(s)”) are designed and
manufactured for applications specified in the Data sheet. (hereinafter called as the “Specific Application”).
We shall not warrant anything in connection with the Products including fitness, performance, adequateness,
safety, or quality, in the case of applications listed in from (1) to (11) written at the end of this precautions,
which may generally require high performance, function, quality, management of production or safety.
Therefore, the Product shall be applied in compliance with the specific application.
WE DISCLAIM ANY LOSS AND DAMAGES ARISING FROM OR IN CONNECTION WITH THE PRODUCTS
INCLUDING BUT NOT LIMITED TO THE CASE SUCH LOSS AND DAMAGES CAUSED BY THE
UNEXPECTED ACCIDENT, IN EVENT THAT (i) THE PRODUCT IS APPLIED FOR THE PURPOSE WHICH
IS NOT SPECIFIED AS THE SPECIFIC APPLICATION FOR THE PRODUCT, AND/OR (ii) THE PRODUCT IS
APPLIED FOR ANY FOLLOWING APPLICATION PURPOSES FROM (1) TO (11) (EXCEPT THAT SUCH
APPLICATION PURPOSE IS UNAMBIGUOUSLY SPECIFIED AS SPECIFIC APPLICATION FOR THE
PRODUCT IN OUR CATALOG
SPECIFICATION FORMS, DATASHEETS, OR OTHER DOCUMENTS
OFFICIALLY ISSUED BY US*).
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
9
Rev1.2 October, 2022
UHF RFID Tag Data sheet
LXMSJZNCMF-210
(1) Aircraft equipment
(2) Aerospace equipment
(3) Undersea equipment
(4) Power plant control equipment
(5) Medical equipment
(6) Transportation equipment
(7) Traffic control equipment
(8) Disaster prevention/security equipment
(9) Industrial data-processing equipment
(10) Combustion/explosion control equipment
(11) Equipment with complexity and/or required reliability equivalent to the applications listed in the above.
For exploring information of the Products which will be compatible with the particular purpose other than those
specified in the Data sheet, please contact our sales offices, distribution agents, or trading companies with
which you make a deal, or via our web contact form.
Contact form: https://www.murata.com/contactform
*We may design and manufacture particular Products for applications listed in (1) to (11). Provided that, in
such case we shall unambiguously specify such Specific Application in the Data sheet without any exception.
Therefore, any other documents and/or performances, whether exist or non-exist, shall not be deemed as the
evidence to imply that we accept the applications listed in (1) to (11).
!
Note:
Please make sure that your product has been evaluated and confirmed against your specifications when our
product is attached to your product.
All the items and parameters in this product specification have been prescribed on the premise that our
product is used for the purpose, under the condition and in the environment agreed upon between you and us.
You are requested not to use our product deviating from such agreement.
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
10
Rev1.2 October, 2022
UHF RFID Tag Data sheet
LXMSJZNCMF-210
Appendix 1
< High temperature process >
Please make sure to avoid more than 2 times of heating process when this product is attached with high
temperature process.
Temperature profile of the attaching process should not exceed below reflow mounting process.
Excessive heating process might damage this product.
The impact of heating process should be evaluated to confirm the reliability based on customers’ use case.
Please consult with Murata in case heating process exceeds 217℃(solder paste melting point).
Reference: Reflow profile
Reflow profile
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
11
Rev1.2 October, 2022
UHF RFID Tag Data sheet
LXMSJZNCMF-210
Murata conducted the injection mold test, with the condition in table 1 and the result is shown in the table 2.
This test is conducted with Murata test condition as a reference and not as a recommendation of attachment
process.
Please make sure to conduct test with actual condition to confirm the reliability before use.
Table 1: Injection mold test
Plastic type
PP
Plastic grade
J106-GOS
Upper mold : 40
Mold temperature[℃]
Lower mold : 40
Plastic
Plastic material : 180
temperature[℃]
Nozzle : 200
Injection time[Sec]
1.9
Chilling time[Sec]
15
First Pressure[MPa]
224
Holding Pressure[MPa]
224
Table 2: Test result
Item
Injection mold
Specification
Satisfy specification
Test method
Qty
In Table 1
listed in paragraph 5.
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
12
Rev1.2 October, 2022
30
Result
(NG)
30
(0)