MGJ2 Surface Mount Series
www.murata-ps.com
5.7kVDC Isolated 2W SM Gate Drive DC-DC Converters
12V & 15V inputs
+15V/-9V, +15V/-5V & +20V/-5V outputs
Operation up to 105oC (with derating)
Short circuit protection
mVp-p
MGJ2D121505MPC
MGJ2D121509MPC
MGJ2D122005MPC
MGJ2D151505MPC
MGJ2D151509MPC
MGJ2D152005MPC
35
20
20
30
20
20
Characterised CMTI >200kV/ȝS
INPUT CHARACTERISTICS
Continuous barrier withstand voltage 2.5kV
Parameter
Characterised partial discharge performance
Voltage range
PRODUCT OVERVIEW
The MGJ2 series of DC-DC converters is ideal
for powering ‘high side’ and ‘low side’ gate drive
circuits for IGBTs/SiC and MOSFETs in bridge
circuits. A choice of asymmetric output voltages
allows optimum drive levels for best system
efficiency. The MGJ2 series is characterised for high
isolation requirements commonly seen in bridge
circuits used in motor drives and inverters, while
the MGJ2 industrial grade temperature rating and
construction gives long service life and reliability.
Load Regulation
(Max)
14
13
12
11
10
9
Load Regulation
(Typ)
9
8
7.5
7
6
6
7
7
6.5
5.5
5
5
12
12
11
9
9
8
%
Input short circuit
current ISC
%
55
45
45
65
45
45
73
72
71
72
73
71
pF
77
77
75
77
77
76
3
3
3
3
3
3
MTTF2
Isolation
Capacitance
Efficiency (Typ)
Order Code1
Ultra low isolation capacitance
Surface mount package style
210
210
215
170
170
170
Output 2
SELECTION GUIDE (Continued)
ANSI/AAMI ES60601-1 recognition pending
5.7kVDC isolation test voltage ‘Hi Pot Test’
Load Regulation
(Max)
mA
100
80
80
100
80
80
Load Regulation
(Typ)
Output Current 2
100
80
80
100
80
80
Output 1
Input Current
at Rated Load
Output Current 1
V
-5
-9
-5
-5
-9
-5
Efficiency (Min)
Reinforced insulation to UL62368
recognition pending
Output Voltage 2
Optimised bipolar output voltages for IGBT/
SiC & MOSFET gate drives
V
15
15
20
15
15
20
Ripple & Noise
(Max)3
Patent protected
V
12
12
12
15
15
15
Ripple & Noise
(Typ)3
FEATURES
MGJ2D121505MPC
MGJ2D121509MPC
MGJ2D122005MPC
MGJ2D151505MPC
MGJ2D151509MPC
MGJ2D152005MPC
Output Voltage 1
Order Code1
Nominal Input
Voltage
SELECTION GUIDE
MIL.
Tel.
kHrs
1411
1548
1217
1224
1332
1108
52799
47759
42399
56429
56879
43521
Conditions
Min.
Typ.
Max.
Units
Continuous operation, 12V input types
Continuous operation, 15V input types
12V input types
10.8
13.5
12
15
90
13.2
16.5
V
15V input types
mA
55
Input reflected ripple
mA
p-p
10
OUTPUT CHARACTERISTICS
Parameter
Rated power
Voltage set point accuracy
Line regulation
Conditions
TA=-40ºC to 85ºC
See tolerance envelopes
MGJ2D121505MPC
MGJ2D121509MPC
All others
Min.
Typ.
1.1
1.1
1.1
Max.
Units
2.0
W
1.25
1.3
1.2
%/%
1. Components are supplied in tape and reel packaging, please refer to package specification section. Orderable part numbers are
MGJ2DXXXXXXMPC-R7 (80 pieces per reel), or MGJ2DXXXXXXMPC-R13 (400 pieces per reel).
2. Calculated using MIL-HDBK-217 FN2 and Telcordia SR-332 calculation model with nominal input voltage at full load.
3. See ripple & noise test method.
For full details go to
https://www.murata.com/englobal/products/power/rohs
All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified
www.murata.com
KDC_MGJ2SM_D01 Page 1 of 16
MGJ2 Surface Mount Series
5.7kVDC Isolated 2W SM Gate Drive DC-DC Converters
ISOLATION CHARACTERISTICS
Parameter
Isolation test voltage
Resistance
Continuous barrier withstand voltage
UL62368-1
Safety standard1
ANSI/AAMI ES60601-1
Conditions
Min.
Production tested for 1 second
Qualification tested for 1 minute
Viso= 1000VDC
Non-safety barrier application
Reinforced
2 MOPP
5700
5700
1
Typ.
Max.
Units
VDC
2500
250
250
Creepage and clearance 9mm
GΩ
V
VAC
GENERAL CHARACTERISTICS
Parameter
Conditions
Switching frequency
12V input type
15V input type
Min.
Typ.
Max.
110
100
Units
kHz
TEMPERATURE CHARACTERISTICS
Parameter
Conditions
Min.
Specification
All output types (see derating curves)
-40
Storage
Product temperature above
ambient
Cooling
Typ.
Max.
Units
105
-40
125
12V input types
27
MGJ2D122005MPC & MGJ2D152005MPC
32
15V input types
25
°C
Free air convection
ABSOLUTE MAXIMUM RATINGS
Short-circuit protection
Input voltage VIN, MGJ2D12
Input voltage VIN, MGJ2D15
Continuous
15V
18V
1. UL62368-1 and ANSI/AAMI ES60601-1 recognition is currently pending.
www.murata.com
KDC_MGJ2SM_D01 Page 2 of 16
MGJ2 Surface Mount Series
5.7kVDC Isolated 2W SM Gate Drive DC-DC Converters
TECHNICAL NOTES
ISOLATION VOLTAGE
‘Hi Pot Test’, ‘Flash Tested’, ‘Withstand Voltage’, ‘Proof Voltage’, ‘Dielectric Withstand Voltage’ & ‘Isolation Test Voltage’ are all terms that relate to the same thing, a test
voltage, applied for a specified time, across a component designed to provide electrical isolation, to verify the integrity of that isolation.
Murata Power Solutions MGJ2 series of DC-DC converters are all 100% production tested at 5.7kVDC for 1 second and have been qualification tested at 5.7kVDC for 1
minute.
A question commonly asked is, “What is the continuous voltage that can be applied across the part in normal operation?”
When the insulation in the MGJ2 series is not used as a safety barrier , i.e. provides functional isolation only, continuous or switched voltages across the barrier up to
2.5kV are sustainable. Long term reliability testing at these voltages continues. Peak Inception voltages measured were in excess of 2.5kV when testing for partial discharge in accordance with IEC 60270. Please contact Murata for further information.
The MGJ2 series is pending recognition by Underwriters Laboratory to 250VAC Reinforced Insulation, please see safety approval section below.
REPEATED HIGH-VOLTAGE ISOLATION TESTING
It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on
materials, construction and environment. We therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be
reduced by 20% from specified test voltage.
SAFETY APPROVAL
ANSI/AAMI ES60601-1
The MGJ2 series is pending recognition by Underwriters Laboratory (UL) to ANSI/AAMI ES60601-1 and provides 2 MOPP (Means Of Patient Protection) based upon a
working voltage of 250VAC max, between Primary and Secondary.
UL62368-1
The MGJ2 series is pending recognition by Underwriters Laboratory (UL) to UL62368-1 for reinforced insulation to a working voltage of 250VAC.
Creepage and clearance 9mm.
Working altitude 5000m
RoHS COMPLIANCE AND MSL INFORMATION
This series is compatible with Pb-Free soldering systems and is also backward compatible with Sn/Pb soldering systems.
The series can be soldered in accordance with J-STD-020. Please refer to application notes for further information. This
series have a classification temperature of 260°C and moisture sensitivity level 2. The termination finish on this product is
Gold with plating thickness 0.12 microns.
www.murata.com
KDC_MGJ2SM_D01 Page 3 of 16
MGJ2 Surface Mount Series
5.7kVDC Isolated 2W SM Gate Drive DC-DC Converters
ENVIRONMENTAL VALIDATION TESTING
The following tests have been conducted on this product series, as part of our design verification process. The datasheet characteristics specify user operating conditions for this
series, please contact Murata if further information about the tests is required.
Test
Standard
Condition
Temperature cycling
JEDEC JESD22-A104
500 cycles in a dual zone chamber from -40 (+5/-10)°C to 105 (+10/-5)°C. 15mins dwell at each (inclusive of
ramps). 2 cycles per hour.
Humidity (unbiased)
Storage life
JEDEC JESD22-A118
JEDEC JESD22-A103, Condition A
130±2°C, 85±5% R.H. for 96 (-0/+2) hours
125°C +10/-0°C for ≥1000 hours
Vibration
BS EN 61373 with respect to BS EN
5 – 150Hz. Level at each axis – Vertical, Traverse and Longitudinal: 5.72m/s2 rms. 5 hours in each axis. Crest
60068-2-64, Test Fh Category 1 Class B factor: 3 Sigma. Device is secured via the pads.
Shock
BS EN 61373: Category 1, Class B
Solvent cleaning
Resistance to cleaning agents
Solvent resistance
MIL-STD-883 Method 2015
Test is 30ms duration, 3 shocks in each sense of 3 mutually perpendicular axes (18 shocks total). Level at each
axis: Vertical, Traverse and Longitudinal: 50m/s2. Device is secured via the pads.
Solvent – Novec 71IPA & Topklean EL-20A. Pulsed ultrasonic immersion 45°C - 65°C
The parts and the bristle portion of the brush are immersed in Isopropanol for a minimum of 1 minute. The
parts are brushed 3 times, after the third time the parts are blown dry and inspected.
PART NUMBER STRUCTURE
MGJ 2 D XX XXXX M P C -RXX
Series name
Packaging code
Power rating
7 - 7 inch reel
13 - 13 inch reel
Output type
S - Single
D - Dual
Input voltage
Output voltage
RoHS compliant
Short circuit
protection
Package type
S - SIP
D - DIP
M - Surface mount
Z - ZIP
www.murata.com
KDC_MGJ2SM_D01 Page 4 of 16
MGJ2 Surface Mount Series
5.7kVDC Isolated 2W SM Gate Drive DC-DC Converters
CHARACTERISATION TEST METHODS
Ripple & Noise Characterisation Method
Ripple and noise measurements are performed with the following test configuration.
C1
1μF X7R multilayer ceramic capacitor, voltage rating to be a minimum of 3 times the output voltage of the DC-DC converter
10μF tantalum capacitor, voltage rating to be a minimum of 1.5 times the output voltage of the DC-DC converter with an ESR of less
C2
than 100mΩ at 100 kHz
C3
100nF multilayer ceramic capacitor, general purpose
R1
450Ω resistor, carbon film, ±1% tolerance
R2
50Ω BNC termination
T1
3T of the coax cable through a ferrite toroid
RLOAD
Resistive load to the maximum power rating of the DC-DC converter. Connections should be made via twisted wires
Measured values are multiplied by 10 to obtain the specified values.
Differential Mode Noise Test Schematic
DC/DC Converter
OSCILLOSCOPE
C1 C2 C3
+
SUPPLY
Input
-
R1
T1
+
R2
Y INPUT
Output
-
R LOAD
APPLICATION NOTES
Minimum load
The minimum load to meet datasheet specification is 10% of the full rated load across the specified input voltage range. Lower than 10% minimum loading will result
in an increase in output voltage, which may rise to typically 1.25 times the specified output voltage if the output load falls to less than 5%.
Gate Drive Applications Advisory Note
For general guidance for product usage in gate drive applications please refer to “gate drive application notes”.
Capacitive loading and start up
MGJ2D121505MPC
MGJ2D121509MPC
MGJ2D122005MPC
MGJ2D151505MPC
MGJ2D151509MPC
MGJ2D152005MPC
Start-up time
ms
10μF
3
4
5
3
4
4
Typical Start-Up Wave Form
www.murata.com
KDC_MGJ2SM_D01 Page 5 of 16
MGJ2 Surface Mount Series
5.7kVDC Isolated 2W SM Gate Drive DC-DC Converters
APPLICATION NOTES (Continued)
The MGJ2 series is a dual output DC-DC specifically designed for gate drive applications and its output configuration is not suitable for application usage as a general
dual output DC-DC converter. However the MGJ2 series can be used as a general purpose single output converter, by loading from +Vout to -Vout.
The MGJ2 series provides a dual output by using a patented pnp emitter follower current shunt divider network circuit with short circuit protection.
+VOUT
R5
R6
C4
0V
Protection
C3
Q1
R4
-VOUT
Optional Configuration:
For optional configuration where alternative negative output voltages are required, an external zener diode network can be connected across the main 20V or 25V
output. However this zener diode will no longer be protected from short circuits as the internal short circuit protection is bypassed.
External Zener Diode Network Circuit Option 1
+VOUT
0V
Protection
-VOUT
External Zener Diode Network Circuit Option 2
+VOUT
0V
Protection
-VOUT
www.murata.com
KDC_MGJ2SM_D01 Page 6 of 16
MGJ2 Surface Mount Series
5.7kVDC Isolated 2W SM Gate Drive DC-DC Converters
APPLICATION NOTES (Continued)
Schematic for driving IGBT, SiC & MOSFET
MGJ2 DC-DC CONNECTIONS FOR DRIVING IGBT DEVICES
OPTOCOUPLER
PWM DRIVE
IGBT
8
5
+15V
+Vin
7
NC
MGJ2DXX1509MC
6
0V
IGBT
2
NA
-Vin
1
3/4
-9V
MGJ2 DC-DC CONNECTIONS FOR DRIVING SiC DEVICES
OPTOCOUPLER
PWM DRIVE
SiC
8
5
+20V
+Vin
7
NC
MGJ2DXX2005MC
6
0V
SiC
2
NA
-Vin
1
3/4
-5V
MGJ2 DC-DC CONNECTIONS FOR DRIVING MOSFET DEVICES
OPTOCOUPLER
PWM DRIVE
MOSFET
8
7
+Vin
+15V
5
NC
MGJ2DXX1505MC
6
0V
MOSFET
2
1
NA
-Vin
-5V
3/4
www.murata.com
KDC_MGJ2SM_D01 Page 7 of 16
MGJ2 Surface Mount Series
5.7kVDC Isolated 2W SM Gate Drive DC-DC Converters
POSITIVE OUTPUT VOLTAGE TOLERANCE ENVELOPES
The voltage tolerance envelopes show typical load regulation characteristics for this product series. The tolerance envelope is the maximum output voltage variation due to
changes in output loading and set point accuracy.
MGJ2D121505MPC
MGJ2D121509MPC
7%
3%
0%
Output Voltage
Output Voltage
7%
2%
2%
-7%
10
25
50
75
-8%
10
100
25
Output Load Current (%)
MGJ2D122005MPC
75
100
MGJ2D151505MPC
7%
3%
1%
Output Voltage
7%
Output Voltage
50
Output Load Current (%)
2%
1%
-7%
-7%
10
25
50
75
100
10
25
MGJ2D151509MPC
75
100
MGJ2D152005MPC
7%
2%
2%
Output Voltage
7%
Output Voltage
50
Output Load Current (%)
Output Load Current (%)
2%
2%
-4%
-5%
10
25
50
Output Load Current (%)
75
100
10
25
50
75
100
Output Load Current (%)
www.murata.com
KDC_MGJ2SM_D01 Page 8 of 16
MGJ2 Surface Mount Series
5.7kVDC Isolated 2W SM Gate Drive DC-DC Converters
NEGATIVE OUTPUT VOLTAGE TOLERANCE ENVELOPES
The voltage tolerance envelopes show typical load regulation characteristics for this product series. The tolerance envelope is the maximum output voltage variation due to
changes in output loading and set point accuracy.
MGJ2D121505MPC
MGJ2D121509MPC
10%
6%
5%
1%
0%
Output Voltage
Output Voltage
4%
-5%
-8%
10
25
50
75
100
10
25
50
Output Load Current (%)
Output Load Current (%)
MGJ2D122005MPC
MGJ2D151505MPC
75
100
10%
4%
Output Voltage
Output Voltage
4%
1%
-4%
-5%
-4%
-11%
10
25
50
75
100
10
25
50
Output Load Current (%)
Output Load Current (%)
MGJ2D151509MPC
MGJ2D152005MPC
75
100
-1%
-2%
-7%
Output Voltage
Output Voltage
4%
1%
-3%
-5%
-10%
10
25
50
Output Load Current (%)
75
100
10
25
50
75
100
Output Load Current (%)
www.murata.com
KDC_MGJ2SM_D01 Page 9 of 16
MGJ2 Surface Mount Series
5.7kVDC Isolated 2W SM Gate Drive DC-DC Converters
EFFICIENCY VS LOAD
MGJ2D121509MPC
80
80
70
70
60
60
50
50
Efficiency (%)
Efficiency (%)
MGJ2D121505MPC
40
30
40
30
20
20
10
10
0
0
0
10
20
30
40
50
60
70
80
90
0
100
10
20
30
40
60
70
80
90
100
70
80
90
100
70
80
90
100
MGJ2D151505MPC
80
80
70
70
60
60
50
50
Efficiency (%)
Efficiency (%)
MGJ2D122005MPC
40
30
40
30
20
20
10
10
0
0
0
10
20
30
40
50
60
70
80
90
100
110
0
10
20
30
40
Load (%)
50
60
Load (%)
MGJ2D151509MPC
MGJ2D152005MPC
80
80
70
70
60
60
50
50
Efficiency (%)
Efficiency (%)
50
Load (%)
Load (%)
40
30
40
30
20
20
10
10
0
0
0
10
20
30
40
50
Load (%)
60
70
80
90
100
0
10
20
30
40
50
60
Load (%)
www.murata.com
KDC_MGJ2SM_D01 Page 10 of 16
MGJ2 Surface Mount Series
5.7kVDC Isolated 2W SM Gate Drive DC-DC Converters
TEMPERATURE DERATING
MGJ2D121505MPC
MGJ2D121509MPC
90%
80%
80%
70%
70%
60%
60%
50%
VIN = 12V
40%
Load (%)
100%
90%
Load (%)
100%
VIN = 13.2V
50%
VIN = 12V
40%
30%
30%
20%
20%
10%
10%
0%
-40
VIN = 13.2V
0%
-20
0
20
40
60
80
-40
100
-20
0
20
40
60
80
100
Temperature (°C)
Temperature (°C)
MGJ2D122005MPC
MGJ2D151505MPC
100%
100%
90%
90%
80%
80%
70%
70%
50%
Load (%)
Load (%)
60%
VIN = 12V
40%
VIN = 13.2V
60%
50%
VIN = 15V
40%
VIN = 16.5V
30%
30%
20%
20%
10%
10%
0%
-40
0%
-40
-20
0
20
40
60
80
100
-20
0
20
120
40
60
80
100
Temperature (°C)
Temperature (°C)
MGJ2D151509MPC
MGJ2D152005MPC
100%
100%
90%
80%
80%
70%
70%
60%
60%
50%
VIN = 15V
40%
VIN = 16.5V
Load (%)
Load (%)
90%
50%
VIN = 15V
40%
VIN = 16.5V
30%
30%
20%
20%
10%
10%
0%
-40
-20
0
20
40
Temperature (°C)
60
80
100
0%
-40
-20
0
20
40
60
80
100
120
Temperature (°C)
www.murata.com
KDC_MGJ2SM_D01 Page 11 of 16
MGJ2 Surface Mount Series
5.7kVDC Isolated 2W SM Gate Drive DC-DC Converters
EMC FILTERING AND SPECTRA
FILTERING
The following filter circuit and filter table shows the input filters typically required to meet EN55022 Quasi-PeakCurve A or B.
L1
+
DC
C1
Cdamp
C2
DC
Cdamp Electrolytic capacitor
MGJ2D121505MPC
MGJ2D121509MPC
MGJ2D122005MPC
MGJ2D151505MPC
MGJ2D151509MPC
MGJ2D152005MPC
L1, μH
22
22
22
33
33
47
Inductor
SMD
Through Hole
84223C
11R223C
84223C
11R223C
84223C
11R223C
84333C
11R333C
84333C
11R333C
84473C
11R473C
C1&2, μF
10
10
10
10
10
10
Capacitor
Part number
GRM188C81C106MA73
GRM188C81C106MA73
GRM188C81C106MA73
GRM188C81C106MA73
GRM188C81C106MA73
GRM188C81C106MA73
Cdamp, μF
100
100
100
100
100
100
MGJ2D121505MPC (Quasi-Peak)
MGJ2D121505MPC (Average)
MGJ2D121509MPC (Quasi-Peak)
MGJ2D121509MPC (Average)
www.murata.com
KDC_MGJ2SM_D01 Page 12 of 16
MGJ2 Surface Mount Series
5.7kVDC Isolated 2W SM Gate Drive DC-DC Converters
EMC FILTERING AND SPECTRA (Continued)
MGJ2D122005MPC (Average)
80
80
70
70
60
60
50
50
dBuV
dBuV
MGJ2D122005MPC (Quasi-Peak)
40
40
30
30
20
20
10
10
0
1.00E+05
1.00E+06
1.00E+07
0
1.00E+05
1.00E+08
Frequency (Hz)
1.00E+06
1.00E+07
1.00E+08
Frequency (Hz)
MGJ2D151505MPC (Quasi-Peak)
MGJ2D151505MPC (Average)
MGJ2D151509MPC (Quasi-Peak)
MGJ2D151509MPC (Average)
80
70
60
dBuV
50
40
30
20
10
0
1.00E+05
1.00E+06
1.00E+07
1.00E+08
Frequency (Hz)
MGJ2D152005MPC (Average)
80
80
70
70
60
60
50
50
dBuV
dBuV
MGJ2D152005MPC (Quasi-Peak)
40
40
30
30
20
20
10
10
0
1.00E+05
1.00E+06
1.00E+07
Frequency (Hz)
1.00E+08
0
1.00E+05
1.00E+06
1.00E+07
1.00E+08
Frequency (Hz)
www.murata.com
KDC_MGJ2SM_D01 Page 13 of 16
MGJ2 Surface Mount Series
5.7kVDC Isolated 2W SM Gate Drive DC-DC Converters
PACKAGE SPECIFICATIONS
MECHANICAL DIMENSIONS
PIN CONNECTIONS
Pin
Function
1
-Vin
2
NA
3
-Vout
4
-Vout
5
+Vout
6
0V
7
NC
8
+Vin
NA - Not Available for electrical connection.
RECOMMENDED FOOTPRINT DETAILS
All dimensions in mm ±0.2mm unless otherwise specified.
Components shown for reference only.
Weight: 2.4g
www.murata.com
KDC_MGJ2SM_D01 Page 14 of 16
MGJ2 Surface Mount Series
5.7kVDC Isolated 2W SM Gate Drive DC-DC Converters
TAPE & REEL SPECIFICATIONS
Reel Outline Dimensions
Ø330
OR
Ø178
Reel Packaging Details
Ø 13.5
12.8
LEADER SECTION
400 MIN
38.4
MAX #
100
MIN
1.5
MIN ##
GOODS
ENCLOSURE
SECTION
Ø20.2
MIN
Tape & Reel specifications shall conform with current EIA-481 standard
Unless otherwise stated all dimensions in mm (inches)
Controlling dimension is mm
# Measured at hub
## Six equi-spaced slots on 180mm/7” reel
TRAILER SECTION
160 MIN
Product Orientation
Pin 1, located nearest to
carrier drive sprocket.
Reel Quantity: 7” - 80 or 13” - 400
Tape Outline Dimensions
Tape & Reel specifications shall conform with current EIA-481 standard
Unless otherwise stated all dimensions in mm
Components shall be orientated within the carrier tape as indicated
# Measured on a plane 0.3mm above the bottom pocket
www.murata.com
KDC_MGJ2SM_D01 Page 15 of 16
MGJ2 Surface Mount Series
5.7kVDC Isolated 2W SM Gate Drive DC-DC Converters
DISCLAIMER
Unless otherwise stated in the datasheet, all products are designed for standard commercial and industrial applications and NOT for safety-critical and/or life-critical
applications.
Particularly for safety-critical and/or life-critical applications, i.e. applications that may directly endanger or cause the loss of life, inflict bodily harm and/or loss or severe
damage to equipment/property, and severely harm the environment, a prior explicit written approval from Murata is strictly required. Any use of Murata standard products for any safety-critical, life-critical or any related applications without any prior explicit written approval from Murata shall be deemed unauthorised use.
These applications include but are not limited to:
•
Aircraft equipment
•
Aerospace equipment
•
Undersea equipment
•
Power plant control equipment
•
Medical equipment
•
Transportation equipment (automobiles, trains, ships, etc.)
•
Traffic signal equipment
•
Disaster prevention / crime prevention equipment
•
Data Processing equipment
Murata makes no express or implied warranty, representation, or guarantee of suitability, fitness for any particular use/purpose and/or compatibility with any application or device of the buyer, nor does Murata assume any liability whatsoever arising out of unauthorised use of any Murata product for the application of the buyer. The
suitability, fitness for any particular use/purpose and/or compatibility of Murata product with any application or device of the buyer remain to be the responsibility and
liability of the buyer.
Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards that anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm, and take appropriate remedial actions. Buyer will fully indemnify and hold
Murata, its affiliated companies, and its representatives harmless against any damages arising out of unauthorised use of any Murata products in any safety-critical and/
or life-critical applications.
Remark: Murata in this section refers to Murata Manufacturing Company and its affiliated companies worldwide including, but not limited to, Murata Power Solutions.
This product is subject to the following operating requirements
and the Life and Safety Critical Application Sales Policy:
Refer to: https://www.murata.com/en-eu/products/power/requirements
Murata Power Solution(Milton keynes) Ltd. makes no representation that the use of its products in the circuits described herein, or the use
of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do
not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change
without notice.
© 2023 Murata Power Solution(Milton keynes) Ltd.
www.murata.com
KDC_MGJ2SM_D01 Page 16 of 16
工商网监
湘ICP备2023018690号
