MM121537

Preliminary Specification of COAXIAL CONNECTOR Written by T. Yui Preliminary SPEC No. : NMM04-PJ0058D Checked by T. Kuriyama Part Number : MM121537 Date 15/Nov./2011 SPECIFICATION Revised A: 23/Apr./’12 TK ,B: 20/Mar./’14 TT, C: 9/Jan./’15 YM, D:2/Nov./’18 II 1. MECHANICAL .60 6 5+/-0.10 Dia .1 Dia .2 11 (6.40) Dia.2.50 +/-0.10 Dia.3.80 ＞A＞B＞C Automatic measurement probe for JSC-Male. MM121540 and MM121542 are used as calibration adapter. .60 3.30 SMA-Female JSC-Female 1.50 12.50 20.20+/-0.30 5 a.1 Di 3 6 Scale: Free Tolerance Unless Otherwise Specified: +/- 0.5 Unit: mm Figure.1 Construction 2. RATING: Item Voltage Rating A> Nominal Frequency Range Nominal Impedance Temperature Rating Insulation Resistance Withstanding Voltage A> Voltage Standing Wave Ratio (V.S.W.R.) Specification 30Vr.m.s. maximum DC to 12GHz 50 -40C to +85C 500 M minimum No evidence of breakdown Meet the requirements of following spec. 1.3 max. (DC to 3GHz) 1.3 max. (3GHz to 6GHz) 1.8 max. (6GHz to 9GHz) 2.3 max. (9GHz to 12GHz) 750K cycles A> Durability 1/3 Preliminary Specification of COAXIAL CONNECTOR Preliminary SPEC No. : NMM04-PJ0058D Part Number : MM121537 Written by T. Yui Checked by T. Kuriyama Date 15/Nov./2011 3. USE THIS PRODUCTS 3.1 The directions for attachment to measurement machine. The probe must be attached to machine at the two screw holes in probe flange. (Figure 2) Screw Hole Figure.2 Screw hole size ＞D 0+/-0.5mm (Acceptable engagement range) Unmating Mating Figure.3 Acceptable engagement range to JSC-Male 2/3 (17.89 to 19.39) 17.7 to 19.2 20.2 3.2 The tolerance of position against JSC-Male. Probe has the centering function by itself, +/-0.5mm is permitted against the hole center of JSC-Male. Please avoid needless force to SMA-Female connector to come back the original position when disengagement of probe. The engagement strokes from the bottom surface of flange to the tip of probe is 17.7mm to 19.2mm. (Figure 3) Preliminary Specification of COAXIAL CONNECTOR Preliminary SPEC No. : NMM04-PJ0058D Part Number : MM121537 Written by T. Yui Checked by T. Kuriyama Date 15/Nov./2011 ＞D 3.3 The slant angle tolerance of probe against JSC-Male. (Figure 4) To have the stable measurement, MM121537 slant angle must be 0+/-2degree. 0+/-2 degree Figure.4 Probe Shape Operation Manual for Auto Measurement probe (MM121537) 3/3