MM121543

Preliminary Specification of COAXIAL CONNECTOR Written by T. Yui Preliminary SPEC No. : NMM04-PJ0060C Checked by T. Kuriyama Part Number : MM121543 Date 15/Nov./2011 SPECIFICATION Revised A: 24/Mar./’14 AB >B:13/May.’14 C:1/Oct./’15 1. MECHANICAL C>B>A Auto measurement probe for JSC-Female and LSC Female. Calibration adapter for MM121543 is as below. LSC MM121530 MM121651 .6 6 5+/-0.1 Dia .1 Dia .2 .6 3.3 SMA-Female Male a. Di 1.5 20.2+/-0.3 12.5 15 3 6 Scale: Free Tolerance Unless Otherwise Specified: +/- 0.5 Unit: mm Figure.1 Construction 2. RATING: >A Item Voltage Rating Nominal Frequency Range Nominal Impedance Temperature Rating Insulation Resistance C> Withstanding Voltage C> Voltage Standing Wave Ratio (V.S.W.R.) Specification 30Vr.m.s. maximum DC to 6GHz 50 -40C to +85C 500 M minimum AC 200V Meet the requirements of following spec. 1.3 (DC to 3GHz) 1.7 (3GHz to 6GHz) Meet the requirements of following spec. 1.5 max. (DC to 3GHz) 1.6 max. (3GHz to 6GHz) 0.8dBmax. (DC to 3GHz) 1.6dBmax. (3GHz to 6GHz) 0.6dBmax. (DC to 3GHz) 1.0dBmax. (3GHz to 6GHz) 250K cycles JSC LSC C> Insertion Ioss JSC LSC C> Durability 1/4 11 (6.4) Dia.2 +/-0.1 Dia.3.8 JSC MM121530 MM121651 Preliminary Specification of COAXIAL CONNECTOR Preliminary SPEC No. : NMM04-PJ0060C Part Number : MM121543 Written by T. Yui Checked by T. Kuriyama Date 15/Nov./2011 3. USE THIS PRODUCTS 3.1 The directions for attachment to measurement machine. The probe must be attached to machine at the screw in probe flange. (Figure 2) The probe must be attached to machine at the two screw holes in probe flange. (Figure 2) Screw Hole Figure.2 Screw hole size >A 0+/-0.25mm (Acceptable engagement range) Unmating (18.03 to 19.53) 17.7 to 19.2 20.2 3.2 The tolerance of position (1) MM5831-2700 and JSC cable plug Probe has the centering function by itself, +0.25mm is permitted against the hole center of MM5831-2700. Please avoid needless force to SMA-J (SMA-Female) connector to come back the original position when disengagement of probe. To get the 10dB or higher isolation (up to 6GHz), the engagement strokes from the top surface of jig to the tip of probe is 17.7mm to 19.2mm. (Figure 3) Mating Figure.3 Acceptable engagement range to MM5831-2700 and JSC cable plug 2/4 Preliminary Specification of COAXIAL CONNECTOR Preliminary SPEC No. : NMM04-PJ0060C Part Number : MM121543 Written by T. Yui Checked by T. Kuriyama Date 15/Nov./2011 0+/-0.25mm (Acceptable engagement range) Unmating (17.85 to 19.35) 17.7 to 19.2 20.2 (2) MM7831-2700 and LSC cable plug Probe has the centering function by itself, +0.25mm is permitted against the hole center of MM7831-2700. Please avoid needless force to SMA-J (SMA-Female) connector to come back the original position when disengagement of probe. To get the 10dB or higher isolation (up to 6GHz), the engagement strokes from the top surface of jig to the tip of probe is 17.7mm to 19.2mm. (Figure 4) Mating Figure.4 Acceptable engagement range to MM7831-2700 and LSC cable plug 3/4 Preliminary Specification of COAXIAL CONNECTOR Preliminary SPEC No. : NMM04-PJ0060C Part Number : MM121543 Written by T. Yui Checked by T. Kuriyama Date 15/Nov./2011 3.3 The slant angle tolerance of probe against MM5831-2700/MM7831-2700/cable plug. (Figure 5) To have the stable measurement, MM121543 slant angle must be 0+/-2degree. 0+/-2 degree Figure.5 Probe Shape Operation Manual for Auto Measurement probe (MM121543)- 4/4