MM126525

Preliminary Specification of COAXIAL CONNECTOR Written by H.Matsukawa Preliminary SPEC No. : NMM04-PU0049A Checked by M.Atokawa Part Number : MM126525 Date 05/Aug./2014 SPECIFICATION Revised A:14/Jan./’14 MA 1. MECHANICAL This probe MM126525 is needed to measure Antenna side performance for manual measurement. A> Probe 1.7 Signal out 1.6 .8 Dia. 0 Signal in RF RF Probe ANT ANT. Signal out GROUND Signal in 1.6 ANT. 21+/-0.2 6.35+/-0.2 Dia.5+/-0.1 3.15+/-0.2 SMA-Female SWH-2Way Figure.1 Construction 2. Dia.7.5+/-0.1 Dia.2.8+/-0.1 5.33+/-0.1 11.6+/-0.2 Scale: Free Tolerances Unless Otherwise Specified: +/-0.2 Unit: mm RATING: Item Specification 30V r.m.s. maximum DC to 6GHz 50 -40C to +85C 500 M minimum No evidence of breakdown 70 m  max. Voltage Rating Nominal Frequency Range Nominal Impedance Temperature Rating Insulation Resistance Withstanding Voltage Initial Contact Resistance (without conductor resistance) Voltage Standing Wave Ratio (V.S.W.R.) Meet the requirements of following spec. 1.5 max. (DC ~3GHz) 1.6 max. (3GHz ~6GHz) 0.5dB max. (DC ~3GHz) 0.9dB max. (3GHz ~6GHz) 2K cycles a. Engagement 30N maximum b. Disengagement 5N minimum 20 N maximum Insertion Ioss Durability Engage and disengage force. (Probe side only) 1/1