MM126715

Dia .1.6 6 11 1.5+/-0.1 Dia.1.8+/-0.1 Dia.3 Dia.3.6 Preliminary Specification of COAXIAL CONNECTOR Written by H. Kitaguchi Preliminary SPEC No. : NMM04-PT0012C Checked by M. Atokawa Part Number : MM126715 Date 25 /Jul./2014 SPECIFICATION Revised A: 20/Oct/’14 OM B: 12/Dec/’14 OM C: 26/Apr./’16 TD 1. MECHANICAL C> Automatic measurement probe for MM8830-2600. MM126714 and MM126712 are used as calibration adapter. A> Dia .2.6 5.35+/-0.2 SMA-Female 1.5 Di a. 15 (7.65) 3.3 12.5 20.35+/-0.3 Figure 1 Construction 2. SWJ 3 6 Scale: Free Tolerance Unless Otherwise Specified: +/- 0.5 Unit: mm RATING: Item Specification 30Vr.m.s. maximum DC to 6GHz 50 -40C to +85C 500 M minimum No evidence of break down in AC200Vr.m.s, 1minute 70mΩ max. Voltage Rating Nominal Frequency Range Nominal Impedance Temperature Rating Insulation Resistance Withstanding Voltage Initial Contact Resistance (without conductor resistance) B> Voltage Standing Wave Ratio (V.S.W.R.) 1.5 max. (DC to 3GHz) 2 max. (3GHz to 6GHz) 0.6dB max. (DC to 3GHz) 1.2dB max. (3GHz to 6GHz) 1M cycles B> Insertion Ioss B> Durability 1/3 Preliminary Specification of COAXIAL CONNECTOR Preliminary SPEC No. : NMM04-PT0012C Part Number : MM126715 Written by Checked by Date H. Kitaguchi M. Atokawa 25 /Jul./2014 3. USE THIS PRODUCTS 3.1 The directions for attachment to measurement machine. The probe must be attached to machine at the screw in probe flange. (Figure 2) The probe must be attached to machine at the two screw holes in probe flange. (Figure 2) Screw Hole Figure.2 Screw hole size Figure.3 Acceptable engagement range to MM8830-2600 2/3 (18.6 to 19.6) 18.15 to 19.15 (Using Area) 0+/-0.4mm (Acceptable engagement range) 20.35 3.2 The tolerance of position against MM8830-2600. Probe has the centering function by itself, +/-0.4 mm is permitted against the hole center of MM8830-2600. Please avoid needless force to SMA-J (SMA-Female) connector to come back the original position when disengagement of probe. To get the 10dB or higher isolation (up to 6GHz), the engagement strokes from the top surface of jig to the tip of probe is 18.15mm to 19.15mm. (Figure 3) Preliminary Specification of COAXIAL CONNECTOR Preliminary SPEC No. : NMM04-PT0012C Part Number : MM126715 Written by Checked by Date H. Kitaguchi M. Atokawa 25 /Jul./2014 3.3 The slant angle tolerance of probe against MM8830-2600. (Figure 4) To have the stable measurement, MM126715 slant angle must be 0+/-2degree. 0+/-2 degree Figure.4 Probe Shape Operation Manual for Auto Measurement probe (MM126715) 3/3