MM8030-2600RJ3

Preliminary Specification of COAXIAL CONNECTOR Preliminary SPEC No. : NMM04-PV0001A Part Number : MM8030-2600B/RJ3/RK0 SPECIFICATION 1. PART NUMBER B>A> Part Number MM8030-2600B MM8030-2600RJ3 MM8030-2600RK0 2. Written by : T. Kuriyama Checked by : H. Aoki Date : 10/Jun./2008 Revised B: 1/Sep./’08 ER , Revised A: 20/Aug./’08 KY Packaging Bulk Package 178mm dia. Reel 330mm dia. Reel Quantity Remarks 3000pcs/reel 10000pcs/reel ESD protection ESD protection MECHANICAL 2.1 a. Di 0.5 Probe 2 Signal in Signal in Signal out Dia. 1.35 0.45 0.9+/-0.1 2 Probe Signal out Signal in 0.9 0.25 Circuit diagram 1.8 1.02 0.38 1.8 0.9 0.15 0.18 Scale: Free Tolerances Unless Otherwise Specified: +/-0.2 Unit: mm FIGURE1. Construction 3. RATING : Item Specification 250V r.m.s. maximum DC to 11GHz 50Ω 2W -40℃ to +85℃ 500 MΩ minimum No evidence of break down in AC300+/-20Vr.m.s, 1minute 70mΩmax. Voltage Rating Nominal Frequency Range Nominal Impedance Power Rating Temperature Rating Insulation Resistance Withstanding Voltage Initial Contact Resistance (without conductor resistance) Voltage Standing Wave Ratio (V.S.W.R.) 1.2 max. (DC to 3GHz) 1.3 max. (3GHz to 6GHz) 1.5max. (6GHz to 11GHz) 0.1dBmax. (DC to 3GHz) 0.2dBmax.(3GHz to 6GHz) 0.5dBmax. (6GHz to 11GHz) 20dBmin.(DC to 3GHz) 15dBmin.(3GHz to 6GHz) 10dBmin. (6GHz to 11GHz) 100 cycles Insertion Loss Isolation Durability 1/2 Preliminary Specification of COAXIAL CONNECTOR Preliminary SPEC No. : NMM04-PV0001A Part Number : MM8030-2600B/RJ3/RK0 Written by : T. Kuriyama Checked by : H. Aoki Date : 10/Jun./2008 4. STANDARD PATTERN DIMENSION A> 2.3 1.36 (1.5) Land (Gold Plating) (1.5) 1.74 2.3 1.5 1.1 2.76 4.5 0.64 0.9 0.5 Land (Electrode) (Note) ⋅The material of PWB is the epoxy resin of glass fabric base. (εr=4.8). Thickness is 1.0mm. ⋅The solder resist should be printed except for the land pattern on the PWB FIGURE2. Standard pattern dimensions 2.3 1.3 FIGURE3. Standard stencil mask pattern 2/2 2.3 1.6 1 0.35