O30E.pdf
Nov.1,2018
Microwave Coaxial Connectors
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EU RoHS Compliant
• All the products in this catalog comply
with EU RoHS.
• EU RoHS is "the European Directive
2011/65/EU on the Restriction of the
Use of Certain Hazardous Substances in
Electrical and Electronic Equipment."
• For more details, please refer to our web
page, "Murata's Approach for EU RoHS"
(https://www.murata.com/en-eu/support/
compliance/rohs).
O30E.pdf
Nov.1,2018
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
1
Contents
Product specifications are as of June 2018.
Part Numbering
p2
Type of Connectors
p4
2
1 Microwave Coaxial Connectors with Switch
SWD Type
p6
SWF Type
p8
SWG Type
p10
SWH Type
p12
SWH-2Way Type
p14
SWJ Type
p16
2 Microwave Coaxial Connectors
JSC Type
p18
KSC Type
p20
LSC Type
p22
3 Microwave Coaxial Board to Board Connectors
JSC Type
p24
KSC Type
p26
LSC Type
p28
Notice (Design)
p30
Notice (Engagement/Disengagement)
p31
Type of Probes
p32
Electrical Performance Measurement System
(Insertion Loss, VSWR)
p33
Mechanical Performance Measurement System
(Engagement/Disengagement Force)
p34
Notice
p35
Please check the MURATA website (https://www.murata.com/)
if you cannot find a part number in this catalog.
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
o Part Numbering
Microwave Coaxial Connectors/Multi Connectors
(Part Number)
MM
8930
-26
00
R
K0
1
2
3
4
5
6
1Product ID
5Package Product ID
Code
Code
MM
Microwave Coaxial Connectors/Multi Connectors
(Chip Type Receptacle)
Package Product ID
B
Bulk
R
Reel
*You cannot order with Bulk for MP items.
2Series
Code
Series
6Package Detail
5829
JSC-Male Type
Code
Package Detail
5831
JSC-Female Type
A1
SWD Type, 1000pcs./Reel (ø180mm)
6829
KSC-Male Type
A2
SWF Type, 2000pcs./Reel (ø180mm)
6831
KSC-Female Type
B3
SWD Type, 3000pcs./Reel (ø330mm)
7829
LSC-Male Type
B8
SWF Type, 8000pcs./Reel (ø330mm)
7831
LSC-Female Type
J3
SWG Type, 3000pcs./Reel (ø180mm)
8430
SWD Type
8130
SWF Type
J4
SWH, SWJ, JSC-Male, JSC-Female Type,
4000pcs./Reel (ø180mm)
8030
SWG Type
8930
SWH Type
J5
KSC-Male, KSC-Female, LSC-Male,
LSC-Female, 5000pcs./Reel (ø180mm)
8830
SWJ Type
K0
SWG, SWH, JSC-Male, JSC-Male Type,
10000pcs./Reel (ø330mm)
K15
SWJ, JSC-Female Type,
15000pcs./Reel (ø330mm)
K20
KSC-Male, KSC-Female, LSC-Male,
LSC-Female, 20000pcs/Reel (ø330mm)
3Individual Specification Code (1)
Code
Individual Specification Code (1)
-26
Switch Connector SMD Type
-27
Connector SMD Type
4Individual Specification Code (2)
2
Code
Individual Specification Code (2)
00
Serial
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
O30E.pdf
Nov.1,2018
Microwave Coaxial Connectors with Cable
(Part Number)
MX
JA
01
**
**
**
1
2
3
4
5
6
4Connector (2)
1Product ID
Code
MX
Microwave Coaxial Connectors with Cable
2Connector (1)
Code
Connector (2)
JA
JSC Type for 01 Cable
JG
JSC Type for B3 Cable
JF
JSC Type for 56 Cable
Code
Connector (1)
KG
KSC Type for B3 Cable
JA
JSC Type for 01 Cable
KF
KSC Type for 56 Cable
JG
JSC Type for B3 Cable
LA
LSC Type for B3 Cable
JF
JSC Type for 56 Cable
LF
LSC Type for 56 Cable
KG
KSC Type for B3 Cable
XX
None Connector
KF
KSC Type for 56 Cable
LA
LSC Type for B3 Cable
LF
LSC Type for 56 Cable
3Cable
5Length
Expressed by four figures. The unit is mm. From first to third
figures are significant, and the fourth figure expresses the number
of zeros which follow the three figures.
Ex.)
Code
Cable
01
0.4D, PFA, Single Shield Line, Spiral
B3
0.2D, PFA, Single Shield Line, Spiral
56
0.3D, PFA, Single Shield Line, Spiral
Code
Length
5000
500mm=500x100
1001
1000mm=100x101
6Individual Specification Code
Code
Individual Specification Code
**
Expressed by two sign
3
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Type of Connectors
Murata offers a variety of connectors:
• Switch connector to measure RF circuit.
• Microwave coaxial cable connector to transmit high frequency signals between circuits with low loss.
• Board to Board connector to transmit high frequency signals from board to board with low loss.
Microwave Coaxial Connectors with Switch
ANT
The RF circuit and ANT characteristics can be measured by
mounting in an RF transmission line.
The internally built-in mechanical switch separates the RF
circuit and ANT circuit, so that the circuit can be measured
without any mutual effect using a dedicated probe made
by Murata. Except when measuring with probe, internal
mechanical switch is connected, so RF circuit and Antenna
circuit are connected.
RF
circuit
Probe
Signal in
Signal out
Probe
Signal out
Signal in
Microwave Coaxial Connectors with Switch (bi-direction)
RF circuit and Antenna circuit can be measured by using
special probe without remounting switch connector.
ANT
RF
circuit
Probe
Signal in
Probe
Signal out
RF
ANT.
Signal out
Signal in
RF
ANT.
Probe
Probe
Signal out
Signal in
RF
4
Signal out
Signal in
ANT.
Continued on the following page.
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Type of Connectors
Continued from the preceding page.
Microwave Coaxial Connectors with Cable
This connector transmits high frequency signals between
circuits, and its transmission loss is lower than electrode
pattern.
SMD type coaxial Connector and coaxial cable connector
are used in a kit.
MAIN
ANT
RF
circuit
DIVERSITY
ANT
Microwave Coaxial Board to Board Connectors
Board to Board connector to transmit high frequency signals
from board to board, such as antenna and main board.
MAIN
ANT
DIVERSITY
ANT
RF
circuit
5
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Nov.1,2018
Microwave Coaxial Connectors with Switch
Microwave Coaxial Connectors with Switch SWD Type
3±0.1
Features
3±0.1
IN
1. The microwave coaxial connector with switch is very
useful for electrical characteristics measurement of
microwave circuits for PC, tablet, and cellular phone.
2. Size 3x3x1.75mm (LxWxH), Occupation area 9mm2
3. Excellent characteristics, IL 0.2dB max. (@6GHz), VSWR
1.3 max. (DC to 6GHz)
4. Connector durability is 500 cycles with probe.
Signal in
OUT
GROUND
0.8
1.75±0.15
dia 2.1
Inner terminal (R)
0.1 1±0.1 1±0.1
0.4±0.1
Applications
0.4±0.1
0.5±0.1
2±0.1
Inner terminal (C)
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
(in mm)
PC, Tablet, Cellular phone, and Other wireless equipment
Nominal
Center Contact Withstanding Insulation Durability
Frequency
Resistance
Voltage
Resistance
(Cycle)
Range (GHz)
(mΩ max.)
(Vrms)
(MΩ)
Part Number
MM8430-2610
50
300
500
500
to 6
VSWR
(dB max.)
Insertion Loss (On)
(dB max.)
Isolation (Off)
(dB min.)
1.2 (DC to 3GHz)
0.1 (DC to 3GHz)
20 (DC to 3GHz)
1.3 (3GHz to 6GHz) 0.2 (3GHz to 6GHz) 15 (3GHz to 6GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Specification (Insertion Loss & VSWR)
3
0.2
IL
2.6
0.4
2.4
0.6
2.2
0.8
1
2
1.8
1.2
1.6
1.4
Insertion Loss (dB)
VSWR
2.8
1.6
1.4
1.2
1
Measurement system: Refer to Electrical performance
measurement system (p. 33)
0
1.8
VSWR (Gating function)
0
1
2
3
4
Frequency (GHz)
This data is reference only.
5
6
2
Standard Pattern Dimension, Stencil Mask Pattern
Standard Pattern Dimensions
4.00
Through hole
1.00
1.00
2.10
2.00
1.00
0.50
3.10
4.10
3.00
• I/O pattern should be designed to be the impedance
match 50 ohm.
• The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 1.0mm.
• The solder resist should be printed except for the land
pattern on the PWB
• Land pattern and solder resist pattern must be followed
to avoid soldering defects.
(1.50)
(1.50)
1.74
Land (Gold Plating)
Electrode
(in mm)
Continued on the following page.
6
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Continued from the preceding page.
• There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
Standard Stencil Mask Pattern
0.53
2.00
3.60
3.00
1.00
1
2.00
3.50
(Thickness: 0.1mm)
The standard solder cream stencil mask drawing
Dimensions of Reel
(in mm)
Dimensions of Taping
P0
D0
T
E
P2
B
3° max.
D
B
W
F
A
N
W1
W2
P1
Part Number
A
B
C
D
N
W1
W2
MM8430-2610RA1 180+0/-3 13±0.5 21±0.8 2±0.5 Dia. 60+2/-0 13+2/-0 17±2
MM8430-2610RB3 330±2.0 13±0.5 21±0.8 2±0.5 Dia. (110) 13.4±2 17.4±2
(in mm)
A
3° max.
C
K
A
B
W
D0
E
F
K
3.4±0.1 3.4±0.1 12±0.2 Dia. 1.5±0.1 1.75±0.1 5.5±0.1 2.0±0.15
P0
P1
P2
T
4±0.1 8±0.1 2±0.1 0.3±0.05
(in mm)
Minimum Quantity
MM8430-2610RA1: 180 mm dia. reel/1000 pcs.
MM8430-2610RB3: 330 mm dia. reel/3000 pcs.
7
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Nov.1,2018
Microwave Coaxial Connectors with Switch
Microwave Coaxial Connectors with Switch SWF Type
2.5
Features
Dia.
2.5
1. The microwave coaxial connector with switch is very
useful for electrical characteristics measurement of
microwave circuit for PC, tablet and cellular phone.
2. Size 2.5x2.5x1.4mm (LxWxH), Occupation area 6.25mm2
3. Excellent characteristics, low IL 0.2dB max. (@6GHz)
V.S.W.R. 1.3 max. (DC to 6GHz)
4. Connector durability is 100 cycles with probe.
0.6
IN
OUT
Signal in
GROUND
1.3±0.1
1.5±0.1
0.18±0.1
Applications
0.35±0.1
0.45±0.1
Inner terminal (R)
0.45±0.1
0.1
0.6±0.1
Inner terminal (C)
0.8
1.4±0.1
Dia. 2.1
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
(in mm)
PC, Tablet, Cellular phone and other wireless equipment
Nominal
Center Contact Withstanding Insulation Durability
Frequency
Resistance
Voltage
Resistance
(Cycle)
Range (GHz)
(mΩ max.)
(Vrms)
(MΩ)
Part Number
MM8130-2600
70
300
500
100
to 6
VSWR
(dB max.)
Insertion Loss (On)
(dB max.)
Isolation (Off)
(dB min.)
1.2 (DC to 3GHz)
0.1 (DC to 3GHz)
20 (DC to 3GHz)
1.3 (3GHz to 6GHz) 0.2 (3GHz to 6GHz) 15 (3GHz to 6GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Specification (Insertion Loss & VSWR)
3
0.2
IL
2.6
0.4
2.4
0.6
2.2
0.8
1
2
1.8
1.2
1.6
1.4
Insertion Loss (dB)
VSWR
2.8
1.6
1.4
1.2
1
Measurement system: Refer to Electrical performance
measurement system (p. 33)
0
1.8
VSWR (Gating function)
0
1
2
3
4
Frequency (GHz)
This data is reference only.
5
6
2
Standard Pattern Dimension, Stencil Mask Pattern
Standard Pattern Dimensions
4.00
2.80
1.30
1.74
2.90
4.14
0.50
3.44
2.70
1.10
• I/O pattern should be designed to be the impedance
match 50 ohm.
• The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 1.0mm.
• The solder resist should be printed except for the land
pattern on the PWB
• Land pattern and solder resist pattern must be followed
to avoid soldering defects.
1.50 1.74 1.50
Land (Gold Plating)
Electrode
(in mm)
Continued on the following page.
8
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Continued from the preceding page.
• There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
Standard Stencil Mask Pattern
0.28
2.70
2.14
1.10
2.70
1
1.30
2.48
(Thickness: 0.12mm)
The standard solder cream stencil mask drawing
Dimensions of Reel
Dimensions of Taping
P2
D0
P0
T
B
5° max.
E
B
W
B1
F
A
N
W1
C
P1
W2
Part Number
A
B
C
D
N
W1
W2
MM8130-2600RA2 180+0/-3 13±0.5 21±0.8 2±0.5 Dia. 60+1/-0 9±0.3 11.4±1.0
MM8130-2600RB8 330±2.0 13±0.5 21±0.8 2±0.5 Dia. 100±1.0 9.4±1.0 13.4±1.0
(in mm)
A1
A
5° max.
D
(in mm)
K
A1
B1
A
B
W
D0
2.8±0.1 0.15±0.1 2.8±0.1 0.85±0.1 8±0.2 Dia. 1.5±0.1
P0
P1
P2
T
E
F
K
1.75±0.1 3.5±0.1 1.6±0.1 4±0.1 4±0.1 2±0.1 0.25±0.05
(in mm)
Minimum Quantity
MM8130-2600RA2: 180 mm dia. reel/2000 pcs.
MM8130-2600RB8: 330 mm dia. reel/8000 pcs.
9
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Nov.1,2018
Microwave Coaxial Connectors with Switch
Microwave Coaxial Connectors with Switch SWG Type
2.1
Dia. 0.5
Features
IN
1. The microwave coaxial connector with switch is very
useful for electrical characteristics measurement of
microwave circuit for PC, tablet and cellular phone.
2. Nominal Frequency Range is DC to 11GHz.
3. Size 2x2x0.9mm (LxWxH), Occupation area 4mm2
4. Excellent characteristics, low IL 0.2dB max. (@6GHz) and
0.5dB max. (@11GHz) V.S.W.R. 1.3 max. (DC to 6GHz) and
1.5 max. (6GHz to 11GHz)
5. Connector durability is 100 cycles with probe.
OUT
2
Signal in
2
Dia. 1.35
Innerterminal (C)
0.15+0.2
-0.1
1.9
0.25
1.9
1
1
0.38
0.08
0.45
0.9±0.1
GROUND
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
Inner terminal (R)
+0.2
0.18-0.1
(in mm)
Applications
PC, Tablet, Cellular phone and other wireless equipment
Center Contact Withstanding Insulation Durability Nominal
Frequency
Resistance
Voltage
Resistance
(Cycle) Range (GHz)
(mΩ max.)
(Vrms)
(MΩ)
Part Number
MM8030-2610
70
300
500
100
to 11
VSWR
(dB max.)
Insertion Loss (On)
(dB max.)
Isolation (Off)
(dB min.)
1.2 (DC to 3GHz)
0.1 (DC to 3GHz)
20 (DC to 3GHz)
1.3 (3GHz to 6GHz) 0.2 (3GHz to 6GHz) 15 (3GHz to 6GHz)
1.5 (6GHz to 11GHz) 0.5 (6GHz to 11GHz) 10 (6GHz to 11GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Specification (Insertion Loss & VSWR)
3
0.2
IL
2.6
0.4
2.4
0.6
2.2
0.8
1
2
1.8
1.2
1.6
1.4
1.6
1.4
1.2
10
1.8
VSWR (Gating function)
0
1
2
3
4
5
6
7
8
Frequency (GHz)
This data is reference only.
9
10
2
11
Insertion Loss (dB)
VSWR
2.8
1
Measurement system: Refer to Electrical performance
measurement system (p. 33)
0
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Standard Pattern Dimension, Stencil Mask Pattern
• I/O pattern should be designed to be the impedance
match 50 ohm.
• The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 1.0mm.
• The solder resist should be printed except for the land
pattern on the PWB
• Land pattern and solder resist pattern must be followed
to avoid soldering defects.
Standard Pattern Dimensions
0.64
1.10
0.64
1.10
2.30
1.36
0.90
0.50
2.30
1.50
1
1.36
1.00
0.90
0.50
2.30
2.30
Resist Area
Land (Electrode + Gold Plating)
Electrode
(in mm)
• There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
Standard Stencil Mask Pattern
2.20
1.10
0.36
2.20
1.34
0.31
1.36
1.00
1.68
2.30
1.00
1.64
2.30
0.82
1.10
1.58
2.30
0.84
2.20
1.18
0.33
1.36
(Thickness: 0.08mm)
(Thickness: 0.10mm)
(Thickness: 0.12mm)
The standard solder cream stencil mask drawing
Dimensions of Reel
Dimensions of Taping
P2
D0
P0
T
B
5° max.
E
W
B
F
B1
A
N
W1
C
P1
W2
Part Number
A
B
C
D
N
W1
W2
MM8030-2610RJ3 180+0/-3 13±0.5 21±0.8 2±0.5 Dia. 60+1/-0 9±0.3 11.4±1.0
MM8030-2610RK0 330±2.0 13±0.5 21±0.8 2±0.5 Dia. 100±1.0 9.4±1.0 13.4±1.0
(in mm)
A1
A
5° max.
D
(in mm)
K
A1
B1
A
B
W
D0
2.28±0.1 0.15±0.1 2.28±0.1 0.85±0.1 8±0.2 Dia. 1.5±0.1
P0
P1
P2
T
E
F
K
1.75±0.1 3.5±0.1 1.1±0.1 4±0.1 4±0.1 2±0.1 0.25±0.05
(in mm)
Minimum Quantity
MM8030-2610RJ3: 180 mm dia. reel/3000 pcs.
MM8030-2610RK0: 330 mm dia. reel/10000 pcs.
11
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Nov.1,2018
Microwave Coaxial Connectors with Switch
Microwave Coaxial Connectors with Switch SWH Type
1.7
.46
Dia.0
Features
1. The microwave coaxial connector with switch is very
useful for electrical characteristics measurement of
microwave circuit for cellular phone and small wireless
equipment such as wearable equipment.
2. Size 1.6x1.6x0.7mm (LxWxH), Occupation area 2.56mm2
3. Excellent characteristics, low IL 0.2dB max. (@6GHz)
V.S.W.R. 1.3 max. (DC to 6GHz)
4. Connector durability is 50 cycles with probe.
1.6
Signal in
IN
OUT
GROUND
0.7
Dia.1.1
0.3
1.6
0.08
Inner terminal (R)
0.8
0.2
0.55
0.18
0.38
Inner terminal (C)
0.12
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
0.11
(in mm)
Applications
Cellular phone, Wearable equipment and other wireless
equipment
Nominal
Center Contact Withstanding Insulation Durability
Frequency
Resistance
Voltage
Resistance
(Cycle) Range (GHz)
(mΩ max.)
(Vrms)
(MΩ)
Part Number
MM8930-2600
70
200
500
50
to 6
VSWR
(dB max.)
Insertion Loss (On)
(dB max.)
Isolation (Off)
(dB min.)
1.2 (DC to 3GHz)
0.1 (DC to 3GHz)
20 (DC to 3GHz)
1.3 (3GHz to 6GHz) 0.2 (3GHz to 6GHz) 15 (3GHz to 6GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Specification (Insertion Loss & VSWR)
3
0.4
2.4
0.6
2.2
0.8
1
2
1.8
1.2
1.6
1.4
1.4
1.6
1.8
VSWR (Gating function)
0
1
2
3
4
Frequency (GHz)
This data is reference only.
5
6
2
Insertion Loss (dB)
VSWR
IL
1.2
12
0.2
2.6
1
Measurement system: Refer to electrical performance
measurement system (p. 33)
0
2.8
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Standard Pattern Dimension, Stencil Mask Pattern
Standard Pattern Dimensions
1
3.20
1.70
0.80
0.70
0.30
Inner Terminal (R)
0.45
1.30
1.80
1.70
1.70
0.45
0.35
Inner Terminal (C)
• There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
Non-resist area
Ground
4.20
1.03 1.10
0.45
Non-resist Area
Land (Gold Plating)
Electrode
(in mm)
Standard Stencil Mask Pattern
1.60
1.10
1.60
1.10
0.23
(Thickness: 0.08mm)
1.36
1.80
1.30
1.80
1.70
0.45
0.25
1.55
0.55
• I/O pattern should be designed to be the impedance
match 50 ohm.
• The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 0.4mm.
• The solder resist should be printed except for the land
pattern on the PWB
• Land pattern and solder resist pattern must be followed
to avoid soldering defects.
(Thickness: 0.10mm)
The standard solder cream stencil mask drawing
(in mm)
Dimensions of Reel
P2
D0
P0
T
B
C
P1
W2
Part Number
A
B
C
D
N
W1
W2
MM8930-2600RJ4 180+0/-3 13±0.5 21±0.8 2±0.5 Dia. 60+1/-0 9±0.3 11.4±1.0
MM8930-2600RK0 330±2.0 13±0.5 21±0.8 2±0.5 Dia. 100±1.0 9.4±1.0 13.4±1.0
(in mm)
A1
W
A
5° max.
B
F
B1
A
N
W1
5° max.
E
D
Dimensions of Taping
K
A1
B1
A
B
W
D0
1.73±0.1 0.14±0.1 1.73±0.1 0.8±0.2 8±0.2 Dia. 1.5±0.1
P0
P1
P2
T
E
F
K
1.75±0.1 3.5±0.1 0.8±0.1 4±0.1 4±0.1 2±0.1 0.25±0.05
(in mm)
Minimum Quantity
MM8930-2600RJ4: 180 mm dia. reel/4000 pcs.
MM8930-2600RK0: 330 mm dia. reel/10000 pcs.
13
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Nov.1,2018
Microwave Coaxial Connectors with Switch
Microwave Coaxial Connectors with Switch SWH-2Way Type
1.7
.8
Dia. 0
1.6
Features
1. The microwave 2way (bi-directional) coaxial connector
with switch is very useful for electrical characteristics
measurement of microwave circuit for cellular phone and
small wireless equipment such as wearable equipment.
2. It is possible to measure ANT circuit and RF circuit with
designated probe.
3. Size 1.6x1.6x0.7mm (LxWxH), Occupation area 2.56mm2
4. Excellent characteristics, low IL 0.2dB max. (@6GHz)
V.S.W.R. 1.3 max. (DC to 6GHz)
5. Connector durability is 50 cycles with probe.
IN
OUT
GROUND
0.7
Dia. 1.2
0.3
1.6
0.08
Inner terminal (R)
0.8
0.2
0.55
0.18
0.38
Inner terminal (C)
0.12
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
0.12
(in mm)
Applications
Cellular phone, Wearable equipment and other wireless
equipment
Center Contact Withstanding Insulation Durability Nominal
Frequency
Resistance
Voltage
Resistance
(Cycle) Range (GHz)
(mΩ max.)
(Vrms)
(MΩ)
Part Number
VSWR
(dB max.)
Insertion Loss (On)
(dB max.)
Isolation (Off)
(dB min.)
RF: 20 (DC to 3GHz)
MM8930-2620
70
200
500
50
to 6
1.2 (DC to 3GHz)
0.1 (DC to3GHz) RF: 15 (3GHz to 6GHz)
1.3 (3GHz to 6GHz) 0.2 (3GHz to 6GHz) ANT: 18 (DC to 3GHz)
ANT: 13 (3GHz to 6GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Specification (Insertion Loss & VSWR)
3
0.2
IL
2.6
0.4
2.4
0.6
2.2
0.8
1
2
1.8
1.2
1.6
1.4
1.6
1.4
1.2
14
1.8
VSWR (Gating function)
0
1
2
3
4
Frequency (GHz)
This data is reference only.
5
6
2
Insertion Loss (dB)
VSWR
2.8
1
Measurement system: Refer to electrical performance
measurement system (p. 33)
0
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Standard Pattern Dimension, Stencil Mask Pattern
Standard Pattern Dimensions
1
3.20
1.70
0.80
0.70
0.30
R Terminal (Ant)
0.45
1.30
1.80
1.70
1.70
0.45
0.35
C Terminal (RF)
• There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
Non-resist area
Ground
4.20
1.03 1.10
0.45
Non-resist Area
Land (Gold Plating)
Electrode
(in mm)
Standard Stencil Mask Pattern
1.60
1.10
1.60
1.10
0.23
(Thickness: 0.08mm)
1.36
1.80
1.30
1.80
1.70
0.45
0.25
1.55
0.55
• I/O pattern should be designed to be the impedance
match 50 ohm.
• The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 0.4mm.
• The solder resist should be printed except for the land
pattern on the PWB
• Land pattern and solder resist pattern must be followed
to avoid soldering defects.
(Thickness: 0.10mm)
The standard solder cream stencil mask drawing
(in mm)
Dimensions of Reel
P2
D0
P0
T
B
C
P1
W2
Part Number
A
B
C
D
N
W1
W2
MM8930-2620RJ4 180+0/-3 13±0.5 21±0.8 2±0.5 Dia. 60+1/-0 9±0.3 11.4±1.0
MM8930-2620RK15 330±2.0 13±0.5 21±0.8 2±0.5 Dia. 100±1.0 9.4±1.0 13.4±1.0
(in mm)
A1
W
A
5° max.
B
F
B1
A
N
W1
5° max.
E
D
Dimensions of Taping
K
A1
B1
A
B
W
D0
1.73±0.1 0.14±0.1 1.73±0.1 0.8±0.2 8±0.2 Dia. 1.5±0.1
P0
P1
P2
T
E
F
K
1.75±0.1 3.5±0.1 0.8±0.1 4±0.1 4±0.1 2±0.1 0.25±0.05
(in mm)
Minimum Quantity
MM8930-2620RJ4: 180 mm dia. reel/4000 pcs.
MM8930-2620RK15: 330 mm dia. reel/15000 pcs.
15
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Nov.1,2018
Microwave Coaxial Connectors with Switch
Microwave Coaxial Connectors with Switch SWJ Type
1.4
Dia. 0.4
Signal in
IN
1.2
Features
1. The worlds smallest level microwave coaxial connector
with switch is very useful for electrical characteristics
measurement of microwave circuit for cellular phone and
small wireless equipment such as wearable equipment.
2. Size 1.4x1.2x0.65mm (LxWxH), Occupation area 1.68mm2
3. Excellent characteristics, low IL 0.2dB max. (@6GHz)
V.S.W.R. 1.3 max. (DC to 6GHz)
4. Connector durability is 50 cycles with probe.
OUT
0.27
Dia. 0.9
0.65±0.1
GROUND
1.4
0.08
0.48 0.59
Inner terminal (R)
0.23
0.23
Inner terminal (C)
0.41
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
+0.2
0.1-0.05
(in mm)
+0.2
0.1-0.05
Applications
Cellular phone, Wearable equipment and other wireless
equipment
Nominal
Center Contact Withstanding Insulation Durability
Frequency
Resistance
Voltage
Resistance
(Cycle) Range (GHz)
(mΩ max.)
(Vrms)
(MΩ)
Part Number
MM8830-2600
70
200
500
50
to 6
VSWR
(dB max.)
Insertion Loss (On)
(dB max.)
Isolation (Off)
(dB min.)
1.2 (DC to 3GHz)
0.1 (DC to 3GHz)
20 (DC to 3GHz)
1.3 (3GHz to 6GHz) 0.2 (3GHz to 6GHz) 15 (3GHz to 6GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Specification (Insertion Loss & VSWR)
3
IL
0.4
2.4
0.6
2.2
0.8
1
2
1.8
1.2
1.6
1.4
1.4
1.6
1.2
1.8
VSWR (Gating function)
0
1
2
3
4
Frequency (GHz)
This data is reference only.
Insertion Loss (dB)
VSWR
0.2
2.6
1
Measurement system: Refer to electrical performance
measurement system (p. 33)
0
2.8
5
6
2
Standard Pattern Dimension, Stencil Mask Pattern
3.20
0.58
1.50
0.64
0.49
R
(0.75)
(1.50)
C 1.78
0.
06
3
Inner Terminal (C)
0.28
0.70
0.60
0.27
0.68
1.00
Inner Terminal (R)
0.
05
0.60
0.30
0.35
0.64
0.96
(1.26)
(0.175)
1.98
0.68
0.48
Standard Pattern Dimensions
3.39
2.99
• I/O pattern should be designed to be the impedance
match 50 ohm.
• The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 0.4mm.
• The solder resist should be printed except for the land
pattern on the PWB
• Land pattern and solder resist pattern must be followed
to avoid soldering defects.
0.26
0.78
1.30
Resist Area
Land (Gold Plating)
Electrode
(in mm)
16
Continued on the following page.
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Continued from the preceding page.
• There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
Standard Stencil Mask Pattern
1.30
0.58
1
R0
.05
1.50
1.00
0.70
0.25
(Thickness: 0.08mm)
The standard solder cream stencil mask drawing
Dimensions of Reel
Dimensions of Taping
P2
D0
P0
T
B
C
P1
W2
Part Number
A
B
C
D
N
W1
W2
MM8830-2600RJ4 180+0/-3 13±0.5 21±0.8 2±0.5 Dia. 60+1/-0 9±0.3 11.4±1.0
MM8830-2600RK15 330±2.0 13±0.5 21±0.8 2±0.5 Dia. 100±1.0 9.4±1.0 13.4±1.0
(in mm)
W
A1 A
5° max.
B
F
B1
A
N
W1
5° max.
E
D
(in mm)
K
A1
B1
A
B
W
D0
1.5±0.1 0.14±0.1 1.3±0.1 0.29±0.1 8±0.2 Dia. 1.5±0.1
P0
P1
P2
T
E
F
K
1.75±0.1 3.5±0.1 0.75±0.1 4±0.1 4±0.1 2±0.1 0.25±0.05
(in mm)
Minimum Quantity
MM8830-2600RJ4: 180 mm dia. reel/4000 pcs.
MM8830-2600RK15: 330 mm dia. reel/15000 pcs.
17
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Microwave Coaxial Connectors
Microwave Coaxial Connectors JSC Type
0.7
0.4
Features
1.7
2
1. The microwave coaxial connector with cables is small,
thin and suitable for internal wiring of cellular phone and
small wireless equipment such as wearable equipment.
2. Nominal Frequency Range is DC to 12GHz. (01 type cable.)
3. Receptacle size 2x1.8 (LxW), Occupation area 3.6mm2
4. Mating height is 1.0mm max., which is the worlds lowest
profile level with cable and receptacle.
5. V.S.W.R. 1.4 max. (DC to 6GHz), 1.6 max. (6GHz to 12GHz)
6. This has good lock feeling when cable and receptacle are
mated.
1.16
1.8
I/O terminal
0.4
1
Dia. 1.3
Outer Terminal
0.5
2
0.08
Inner Terminal
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
(in mm)
Applications
Cellular phone, Wearable equipment and other wireless
equipment
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency Range
(GHz)
VSWR
(dB max.)
35
200
500
30
to 12
1.3 (DC to 3GHz)
1.4 (3GHz to 6GHz)
1.5 (6GHz to 9GHz)
1.6 (9GHz to 12GHz)
MM5829-2700
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Specification (Insertion Loss & VSWR)
3
0
1
2.8
IL
2
2.4
3
2.2
4
2
5
1.8
6
7
1.6
VSWR (Gating function)
1.4
8
9
1.2
1
18
0
1
2
3
4
5
6
7
8
9
Frequency (GHz)
This data is reference only.
10
11
10
12
Insertion Loss (dB)
VSWR
2.6
Measurement system: Refer to electrical performance
measurement system (p. 33)
Cable part number of specification: MXJA01JA1000
Cable type of specification: 01
Cable length of specification: 100mm
Measurement condition: Cable + Receptacle
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Standard Pattern Dimension, Stencil Mask Pattern
Standard Pattern Dimensions
2.20
(1.50)
• There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
2.40
1.70
2.85Min.
I/O Terminal
0.40
1.00
1.74
(1.50)
1.30
0.40
2.40
1.00
0.30
(1.86)
(1.35)
(3.18)
1.40
1.40
1.00
0.40
1.70
2
0.50
0.90
I/O Terminal
2.20
Resist Area
Land (Gold Plating)
Electrode
(in mm)
Standard Stencil Mask Pattern
2.20
1.40
2.20
1.40
0.30
1.50
• I/O pattern should be designed to be the impedance
match 50 ohm.
• The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 1.0mm.
• The solder resist should be printed except for the land
pattern on the PWB
• Land pattern and solder resist pattern must be followed
to avoid soldering defects.
0.30
I/O Terminal
(Thickness: 0.10mm)
The standard solder cream stencil mask drawing
Dimensions of Reel
Dimensions of Taping
D0
P0
T
3° max.
E
P2
D
(in mm)
B
B
W
B1
F
A
N
W1
P1
W2
A
A1
Part Number
A
B
C
D
N
W1
W2
MM5829-2700RJ4 180+0/-3 13±0.2 21±0.8 2±0.5 Dia. 60+1/-0 9±0.3 11.4±1.0
MM5829-2700RK0 330±2.0 13±0.2 21±0.8 2±0.5 Dia. 100±1.0 9.4±1.0 13.4±1.0
(in mm)
3° max.
C
K
A1
B1
A
B
W
D0
2.1±0.1 0.9±0.1 2.0±0.1 0.3±0.1 8±0.2 Dia. 1.5+0.1/-0
P0
P1
P2
T
E
F
K
1.75±0.1 3.5±0.1 0.7±0.1 4±0.1 4±0.1 2±0.1 0.2±0.05
(in mm)
Minimum Quantity
MM5829-2700RJ4: 180 mm dia. reel/4000 pcs.
MM5829-2700RK0: 330 mm dia. reel/10000 pcs.
19
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Microwave Coaxial Connectors
0.15min
Microwave Coaxial Connectors KSC Type
Features
1.2
1.3
1. This worlds smallest level microwave coaxial connector
with cables is thin and suitable for internal wiring of
cellular phone and small wireless equipment such as
wearable equipment.
2. Receptacle size 1.3x1.2 (LxW), Occupation area 1.56mm2
3. Mating height is 0.8mm max., which is world lowest
profile level, with cable and receptacle.
4. V.S.W.R. 1.4 max. (DC to 6GHz)
5. This has good lock feeling when cable and receptacle are
mated.
0.84
1.2
0.2
0.7
Dia. 0.88
0.38
2
1*
Outer Terminal
Inner Terminal
0.08
*1 : This electrode might be
covered with resin.
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
(in mm)
Applications
Cellular phone, Wearable equipment and other wireless
equipment
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency Range
(GHz)
VSWR
(dB max.)
35
200
500
30
to 6
1.3 (DC to 3GHz)
1.4 (3GHz to 6GHz)
MM6829-2700
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Specification (Insertion Loss & VSWR)
3
0
2.8
1
IL
2
2.4
3
2.2
4
2
5
1.8
6
1.6
7
8
1.4
VSWR (Gating function)
1.2
1
20
0
1
2
3
4
Frequency (GHz)
This data is reference only.
9
5
6
10
Insertion Loss (dB)
VSWR
2.6
Measurement system: Refer to electrical performance
measurement system (p. 33)
Cable part number of specification: MXKGB3KG1000
Cable type of specification: B3
Cable length of specification: 100mm
Measurement condition: Cable + Receptacle
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Standard Pattern Dimension, Stencil Mask Pattern
Standard Pattern Dimensions
1.3
1
0.7
1.3
0.5
1.3
0.4
0.75
0.3
0.7
1.3
0.5
0.75
• I/O pattern should be designed to be the impedance
match 50 ohm.
• The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 0.4mm.
• The solder resist should be printed except for the land
pattern on the PWB
• Land pattern and solder resist pattern must be followed
to avoid soldering defects.
1.25
2
0.3
0.3
0.7
1.25
Resist Area
Land (Gold Plating)
Electrode
(in mm)
• There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
Standard Stencil Mask Pattern
1.3
0.99
0.55
0.75
0.4
0.7
1.3
0.74
0.25
(Thickness: 0.08mm)
The standard solder cream stencil mask drawing
Dimensions of Reel
Dimensions of Taping
D0
P0
T
B
B1
C
P1
W2
A
A1
Part Number
A
B
C
D
N
W1
W2
MM6829-2700RJ5 180+0/-3 13±0.2 21±0.8 2±0.5 Dia. 60+1/-0 9±0.3 11.4±1.0
MM6829-2700RK20 330±2.0 13±0.2 21±0.8 2±0.5 Dia. 100±1.0 9.4±1.0 13.4±1.0
(in mm)
3° max.
B
W
F
A
N
W1
3° max.
E
P2
D
(in mm)
K
A1
B1
A
B
W
D0
1.35±0.1 0.29±0.1 1.35±0.1 0.2±0.1 8±0.2 Dia. 1.5+0.1/-0
P0
P1
P2
T
E
F
K
1.75±0.1 3.5±0.1 0.5±0.05 4±0.1 4±0.1 2±0.1 0.2±0.1
(in mm)
Minimum Quantity
MM6829-2700RJ5: 180 mm dia. reel/5000 pcs.
MM6829-2700RK20: 330 mm dia. reel/20000 pcs.
21
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Microwave Coaxial Connectors
Microwave Coaxial Connectors LSC Type
Features
1.6
1.7
1. The microwave coaxial connector with cables is small,
thin and suitable for internal wiring of cellular phone and
small wireless equipment such as wearable equipment.
2. Receptacle size 1.7x1.6 (LxW), Occupation area 2.72mm2
3. Mating height is 0.8mm max., which is world lowest
profile level, with cable and receptacle.
4. Diameter of receptacle cylinder is equal size with
JSC type connector. It makes easy to mate cable and
connector.
5. V.S.W.R. 1.4 max. (DC to 6GHz)
6. This has good lock feeling when cable and receptacle are
mated.
0.9
1.6
0.2
I/O terminal
0.7
Dia.1.3
0.39
2
1*
0.08
*1 : This electrode might be
covered with resin.
Outer Terminal
Inner Terminal
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
(in mm)
Applications
Cellular phone, Wearable equipment and other wireless
equipment
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency Range
(GHz)
VSWR
(dB max.)
35
200
500
30
to 6
1.3 (DC to 3GHz)
1.4 (3GHz to 6GHz)
MM7829-2700
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Specification (Insertion Loss & VSWR)
3
0
1
IL
2.6
2
2.4
3
2.2
4
2
5
1.8
6
1.6
7
8
1.4
VSWR (Gating function)
1.2
1
22
0
1
2
3
4
Frequency (GHz)
This data is reference only.
9
5
6
10
Insertion Loss (dB)
VSWR
2.8
Measurement system: Refer to electrical performance
measurement system (p. 33)
Cable part number of specification: MXLF56LF1000
Cable type of specification: 56
Cable length of specification: 100mm
Measurement condition: Cable + Receptacle
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Standard Pattern Dimension, Stencil Mask Pattern
Standard Pattern Dimensions
1.70
1.70
1.70
I/O Terminal
0.40
0.95
0.70
0.40
1.20
0.70
1.15
0.95
0.70
1.70
1.40
2.10
• I/O pattern should be designed to be the impedance
match 50 ohm.
• The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 0.4mm.
• The solder resist should be printed except for the land
pattern on the PWB
• Land pattern and solder resist pattern must be followed
to avoid soldering defects.
I/O Terminal
0.30
0.70
1.25
1.25
0.30
2
Resist Area
Land (Gold Plating)
Electrode
(in mm)
• There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
Standard Stencil Mask Pattern
0.75
0.95
1.70
1.10
0.70
1.70
1.24
1.00
0.25
I/O Terminal
(Thickness: 0.08mm)
The standard solder cream stencil mask drawing
Dimensions of Reel
Dimensions of Taping
D0
P0
T
B
B1
C
P1
W2
A
A1
Part Number
A
B
C
D
N
W1
W2
MM7829-2700RJ5 180+0/-3 13±0.2 21±0.8 2±0.5 Dia. 60+1/-0 9±0.3 11.4±1.0
MM7829-2700RK20 330±2.0 13±0.2 21±0.8 2±0.5 Dia. 100±1.0 9.4±1.0 13.4±1.0
(in mm)
3° max.
B
W
F
A
N
W1
3° max.
E
P2
D
(in mm)
K
A1
B1
A
B
W
D0
1.75±0.1 0.29±0.1 1.75±0.1 0.2±0.05 8±0.2 Dia. 1.5+0.1/-0
P0
P1
P2
T
E
F
K
1.75±0.1 3.5±0.05 0.5±0.05 4±0.1 4±0.1 2±0.1 0.2±0.05
(in mm)
Minimum Quantity
MM7829-2700RJ5: 180 mm dia. reel/5000 pcs.
MM7829-2700RK20: 330 mm dia. reel/20000 pcs.
23
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Microwave Coaxial Board to Board Connectors
Microwave Coaxial Board to Board Connectors JSC Type
Features
3
1.4
2.0
(Dia. 1.65)
0.4
1. The microwave coaxial Board to Board connector is small,
thin and suitable for internal wiring of cellular phone and
small wireless equipmant such as wearable equipment.
2. Receptacle size 2x1.8 (LxW), Occupation area 3.6mm2.
Plug receptacle size 2x2.2 (LxW), Occupation area 4.4mm2
3. Mating height is 0.8mm max., which is worlds lowest
profile level, with plug receptacle and receptacle.
4. V.S.W.R. 1.5 max. (DC to 6GHz)
5. This has good lock feeling when plug receptacle and
receptacle are mated.
6. This connector mate with MM5829-2700.
0.4
0.6
2.2
0.1
I/O Terminal
Outer Terminal
Inner Terminal
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
(in mm)
Applications
Cellular phone, Wearable equipment and other wireless
equipment
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency Range
(GHz)
VSWR
(dB max.)
35
200
500
30
to 6
1.3 (DC to 3GHz)
1.5 (3GHz to 6GHz)
MM5831-2700
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Specification (Insertion Loss & VSWR)
3
0.2
IL
2.6
0.4
2.4
0.6
2.2
0.8
1
2
1.8
1.2
1.6
1.4
1.6
1.4
VSWR (Gating function)
1.2
24
0
1
2
3
4
Frequency (GHz)
This data is reference only.
1.8
5
6
2
Insertion Loss (dB)
VSWR
2.8
1
Measurement system: Refer to electrical performance
measurement system (p. 33)
Measurement condition: SMD plug + Receptacle
0
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Standard Pattern Dimension, Stencil Mask Pattern
• I/O pattern should be designed to be the impedance
match 50 ohm.
• The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 1.0mm.
• The solder resist should be printed except for the land
pattern on the PWB
• Land pattern and Solder resist pattern must be followed
to avoid soldering defects.
0.65
1.10
0.40
1.50
1.50
I/O Pattern
0.70
0.10
1.86
1.50
2.20
0.30
0.65
0.80
1.10
0.85
0.50
0.40
0.75
Standard Pattern Dimensions
2.40
1.80
1.60
0.50
1.60
2.40
I/O Pattern
1.76
Resist Area
Land (Gold Plating)
Electrode
(in mm)
• There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
3
Standard Stencil Mask Pattern
1.40
0.75 0.80
2.20
Ground Pattern
0.40
I/O Pattern
1.80
2.40
(Thickness: 0.1mm)
The standard solder cream stencil mask drawing
(in mm)
Dimensions of Reel
Dimensions of Taping
D0
P0
T
E
P2
B
3° max.
D
W
C
P1
W2
A
A1
Part Number
A
B
C
D
N
W1
W2
MM5831-2700RJ4 180+0/-3 13±0.2 21±0.8 2±0.5 Dia. 60+1/-0 9±0.3 11.4±1.0
MM5831-2700RK15 330±2.0 13±0.2 21±0.8 2±0.5 Dia. 100±1.0 9.4±1.0 13.4±1.0
(in mm)
3° max.
B
F
B1
A
N
W1
K
A1
B1
A
B
W
D0
2.4±0.1 0.6±0.1 2.0±0.1 0.1±0.1 8±0.2 Dia. 1.5+0.1/-0
P0
P1
P2
T
E
F
K
1.75±0.1 3.5±0.05 0.7±0.05 4±0.1 4±0.1 2±0.1 0.2±0.05
(in mm)
Minimum Quantity
MM5831-2700RJ4: 180 mm dia. reel/4000 pcs.
MM5831-2700RK15: 330 mm dia. reel/15000 pcs.
25
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Microwave Coaxial Board to Board Connectors
Microwave Coaxial Board to Board Connectors KSC Type
Features
3
0.3
1.4
1. The microwave coaxial Board to Board connector is small,
thin and suitable for internal wiring of cellular phone and
small wireless equipment such as wearable equipment.
2. Receptacle size 1.3x1.2 (LxW), Occupation area 1.56mm2,
Plug receptacle size 1.4x1.2 (LxW), Occupation area
1.68mm2
3. Mating height is 0.6mm max., which is worlds lowest
profile level, with plug receptacle and receptacle.
4. V.S.W.R. 1.4 max. (DC to 6GHz)
5. This has good lock feeling when plug receptacle and
receptacle are mated.
6. This connector mates with MM6829-2700.
0.08
0.3
0.4
I/O Terminal
1.2
Outer Terminal
Inner Terminal
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
(in mm)
Applications
Cellular phone, Wearable equipment and other wireless
equipment
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency Range
(GHz)
VSWR
(dB max.)
35
200
500
30
to 6
1.3 (DC to 3GHz)
1.4 (3GHz to 6GHz)
MM6831-2700
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Specification (Insertion Loss & VSWR)
3
0.2
IL
2.6
0.4
2.4
0.6
2.2
0.8
1
2
1.8
1.2
1.6
1.4
1.6
1.4
VSWR (Gating function)
1.8
1.2
26
0
1
2
3
4
Frequency (GHz)
This data is reference only.
5
6
2
Insertion Loss (dB)
VSWR
2.8
1
Measurement system: Refer to electrical performance
measurement system (p. 33)
Measurement condition: SMD plug + Receptacle
0
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Standard Pattern Dimension, Stencil Mask Pattern
Standard Pattern Dimensions
1.3
1.0
0.8
0.5
1.5
0.5
0.3
0.7
0.7
0.4
1.5
0.5
• I/O pattern should be designed to be the impedance
match 50 ohm.
• The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 0.4mm.
• The solder resist should be printed except for the land
pattern on the PWB
• Land pattern and solder resist pattern must be followed
to avoid soldering defects.
0.5
0.7
1.25
1.25
1.3
Resist Area
Land (Gold Plating)
Electrode
(in mm)
• There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects. There is the
possibility to have the contact failure by flux shifting into
contact point, if the excess solder is used by non-standard
stencil mask pattern. Stencil mask pattern must be
followed to avoid soldering defects.
3
Standard Stencil Mask Pattern
1.3
1.08
0.74
1.5
0.94
0.54
0.55 0.53
0.3
0.4
(Thickness: 0.08mm)
The standard solder cream stencil mask drawing
(in mm)
Dimensions of Reel
Dimensions of Taping
D0
P0
T
E
P2
B
3° max.
D
W
C
P1
W2
A
A1
Part Number
A
B
C
D
N
W1
W2
MM6831-2700RJ5 180+0/-3 13±0.2 21±0.8 2±0.5 Dia. 60+1/-0 9±0.3 11.4±1.0
MM6831-2700RK20 330±2.0 13±0.2 21±0.8 2±0.5 Dia. 100±1.0 9.4±1.0 13.4±1.0
(in mm)
3° max.
B
F
B1
A
N
W1
K
A1
B1
A
B
W
D0
1.35±0.1 0.25±0.1 1.55±0.1 0.2±0.1 8±0.2 Dia. 1.5+0.1/-0
P0
P1
P2
T
E
F
K
1.75±0.1 3.5±0.1 0.5±0.05 4±0.1 4±0.1 2±0.1 0.2±0.1
(in mm)
Minimum Quantity
MM6831-2700RJ5: 180 mm dia. reel/5000 pcs.
MM6831-2700RK20: 330 mm dia. reel/20000 pcs.
27
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Microwave Coaxial Board to Board Connectors
Features
3
1.8
1.9
(Dia. 1.64)
0.3
1. The microwave coaxial Board to Board connector is small,
thin and suitable for internal wiring of cellular phone and
small wireless equipment such as wearable equipment.
2. Receptacle size 1.7x1.6 (LxW), Occupation area 2.72mm2,
Plug receptacle size 1.9x1.7 (LxW), Occupation area
3.23mm2
3. Mating height is 0.6mm max., which is world lowest
profile level, with plug receptacle and receptacle.
4. V.S.W.R. 1.4 max. (DC to 6GHz)
5. This has good lock feeling when plug receptacle and
receptacle are mated.
6. This connector mate with MM7829-2700.
0.07+/-0.1
Microwave Coaxial Board to Board Connectors LSC Type
0.08
0.3
0.42
1.7
Outer Terminal
Inner Terminal
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
(in mm)
Applications
Cellular phone, Wearable equipment and other wireless
equipment
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency Range
(GHz)
VSWR
(dB max.)
35
200
500
30
to 6
1.3 (DC to 3GHz)
1.4 (3GHz to 6GHz)
MM7831-2700
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Specification (Insertion Loss & VSWR)
3
0.4
2.4
0.6
2.2
0.8
1
2
1.8
1.2
1.6
1.4
1.4
1.6
1.2
28
0.2
IL
2.6
1.8
VSWR (Gating function)
0
1
2
3
4
Frequency (GHz)
This data is reference only.
5
6
2
Insertion Loss (dB)
VSWR
2.8
1
Measurement system: Refer to electrical performance
measurement system (p. 33)
Measurement condition: SMD plug + Receptacle
0
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Standard Pattern Dimension, Stencil Mask Pattern
Standard Pattern Dimensions
1.8
0.9
2
1.3
1.9
0.73
1
1.9
0.3
0.7
1.4
0.9
0.5
2.1
1.1
1 1
• I/O pattern should be designed to be the impedance
match 50 ohm.
• The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 0.4mm.
• The solder resist should be printed except for the land
pattern on the PWB
• Land pattern and solder resist pattern must be followed
to avoid soldering defects.
1.8
0.5
0.7
1.25
1.25
Resist Area
Land (Gold Plating)
Electrode
(in mm)
• There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
3
Standard Stencil Mask Pattern
1.8
1.4
1.05
1.6
2
1.9
1.44
0.94
0.4
0.4
(Thickness: 0.08mm)
The standard solder cream stencil mask drawing
(in mm)
Dimensions of Reel
Dimensions of Taping
D0
P0
T
E
P2
B
3° max.
D
W
B1
C
P1
W2
A
A1
Part Number
A
B
C
D
N
W1
W2
MM7831-2700RJ5 180+0/-3 13±0.5 21±0.8 2±0.5 Dia. 60+1/-0 9±0.3 11.4±1.0
MM7831-2700RK20 330±2.0 13±0.5 21±0.8 2±0.5 Dia. 100±1.0 9.4±1.0 13.4±1.0
(in mm)
3° max.
B
F
A
N
W1
K
A1
B1
A
B
W
D0
1.85±0.1 0.25±0.1 1.95±0.1 0.2±0.1 8±0.2 Dia. 1.5+0.1/-0
P0
P1
P2
T
E
F
K
1.75±0.1 3.5±0.1 0.5±0.05 4±0.1 4±0.1 2±0.1 0.2±0.1
(in mm)
Minimum Quantity
MM7831-2700RJ5: 180 mm dia. reel/5000 pcs.
MM7831-2700RK20: 330 mm dia. reel/20000 pcs.
29
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Notice (Design)
Microwave Coaxial Connectors, Microwave Coaxial Board to Board Connectors
Connector performance is influenced by GND among inner
layers of substrate.
We recommend makeing space more than 0.4mm between
connectors and GND.
And please avoid placeing signal lines and power lines under
connectors to prevent interference with signals which pass
connectors.
Z=50Ω
More than 400um
X
Y
Part Number
GND
X
Y
MM5829-2700
2.2
2.4
MM5831-2700
2.4
2.2
MM6829-2700
1.3
1.4
MM6831-2700
1.3
1.5
MM7829-2700
1.7
1.8
MM7831-2700
1.8
2.0
Do not place GND, signal lines,
power lines, and so on.
Microwave Coaxial Connectors with Switch
Connector performance is influenced by GND among inner
layers of substrate.
We recommend makeing space more than 0.4mm between
connectors and GND.
And please avoid placeing signal lines and power lines under
connectors to prevent interference with signals which pass
connectors.
Z=50Ω
More than 400um
X
Part Number
GND
30
Do not place GND, signal lines,
power lines, and so on.
Y
X
Y
MM8430-2610
4.0
4.1
MM8130-2600
2.8
2.9
MM8030-2610
2.3
2.3
MM8930-2600
1.7
1.8
MM8930-2620
1.7
1.8
MM8830-2600
1.3
1.5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
O30E.pdf
Nov.1,2018
Notice (Engagement/Disengagement)
Microwave Coaxial Connectors with Cable
When you mate/unmate connectors and cables, please use
specialized engage/disengagement jig.
Please mate to cable plugs and connectors when centering
them and keeping parallel state.
Mating is completed when you feel the click.
Please confirm if mating height is in specification after
mating is completed.
Please do not stress more than 30N when mating cable
plugs and connectors.
Microwave Coaxial Board to Board Connectors
Please mate to connectors when centering them and
keeping parallel state.
Mating is completed when you feel the click.
Please confirm if mating height is in specification after
mating is completed.
Please do not stress more than 30N when mating
connectors.
31
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
O30E.pdf
Nov.1,2018
Type of Probes
We have lineup of measurement probes that are designed
for Murata connecters.
Please use Murata probes for Murata connectors.
32
Manual probe without cable
Manual probe with cable
This is used for evaluation in lab. Measurement cable is
able to be attached with this probe. This probe stands itself
after mating is completed, because it has claw at contact
point with connectors. Any stress to probe via cable after
engagement may cause that probe come off, connectors get
damage, or electrode peel off.
This is used for evaluation in lab. Measurement cable is
assembled with probes. This probe stands itself after mating
is completed, because it has claw at contact point with
connectors. Any stress to probe via cable after engagement
may cause that probe come off, connectors get damage, or
electrode peel off.
Auto probe without floating mechanism
Auto probe with floating mechanism
This probe is used for inspection in mass production process.
Probes are built in measurement fixture, and pressed at
connectors. This probe will not damage connectors because
it doesn’t have locking function by claw. Measurement
fixture needs to have floating mechanism since the probe
doesn’t have floating mechanism itself.
Measurement cable is able to be attached with this probe.
This probe is used for inspection in mass production process.
Probes are built in measurement fixture, and pressed at
connectors. This probe will not damage connectors because
it doesn’t have locking function by claw. Measurement
fixture doesn’t need to have floating mechanism since the
probe has floating mechanism itself.
Auto probe (tension free type)
Calibration adapter
This probe is used for inspection in mass production process.
It has same function as Auto probe with floating mechanism.
This probe is not affected by cable tension because of its
special construction. The probe makes conversion cable
easy to be handled.
This adapter is used for calibrating probes. This has SMA
connector on one side and Murata connector shape on the
other side. It can connect cable from network analyzer and
tip of probe.
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Electrical Performance Measurement System (Insertion Loss, VSWR)
1. Measurement method of cables
(1) Calibration
Use CAL KIT to do SOLT calibration of measurement instrument.
Use through PWB to do through calibration.
Calibration
Calibration
Port2
Port1
SMA
SMA
Through PWB
(2) Measurement
[1] Insertion Loss
Cable connector
Port2
Port1
Receptacle
SMA
SMA
EVB
EVB
[2] VSWR
Use Gating function of network analyzer to measure connector part.
Receptacle
Port1
Cable connector
SMA
5
5
EVB
Gating
2. Measurement method of board to board connectors
(1) Calibration
Use CAL KIT to do SOLT calibration of measurement instrument.
Use through PWB to do through calibration.
Calibration
Calibration
Port2
Port1
SMA
SMA
Through PWB
(2) Measurement
[1] Insertion Loss
Port1
SMA
SMA
Port2
Receptacle
EVB
[2] VSWR
Use Gating function of network analyzer to measure connector part.
5
Receptacle
Port1
SMA
SMA
Port2
5
EVB
Gating
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
O30E.pdf
Mechanical Performance Measurement System (Engagement/Disengagement Force)
1. Engagement/Disengagement force
[1] Engagement force
To measure require force for complete engagement
connectors and receptacles.
Measuring engagement maximum force by pushing
down of push-pull gauge with engagement/
disengagement tool on the tip.
[2] Disengagement force
To measure require force for complete disengagement
connectors and receptacles from mated state.
Measuring disengagement maximum force by pulling up
of push-pull gauge with engagement/disengagement
tool on the tip.
Engagement/Disengagement tool
Push-pull gauge
Vertical motorized
test stand
xx.xx
Connector (Cable connector or Board to Board connector)
+ Receptacle
34
Nov.1,2018
O30E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Nov.1,2018
Notice
Notice
Notice (Storage and Operating Condition)
1. Environment Conditions
(1) This product is designed for use in electrical
equipment in the environment (temperature, humidity,
atmospheric pressure, etc.) specified in this approval
drawing. It may not be used in the following
environments or under the following conditions:
(a) Ambient air containing corrosive gas (Cl2, H2S, NH3,
SOX, NOX etc.).
(b) Ambient air containing volatile or combustible gas.
(c) In liquid (water, oil, chemical solution, organic
solvents, etc.).
(d) In environments with a high concentration of
airborne particles.
(e) In direct sunlight.
(f) Dusty conditions.
(g) In freezing.
(h) Other environments similar to the above conditions.
(2) Contact the manufacturer before using the product in
any of the above environments or under any of the
above conditions.
2. Storage
Store in manufacturer's package or tightly re-closed box
with the following conditions. Use this product within 6
months after receipt. Check the terminal solderability
before use if the product has been stored for more than 6
months.
Temperature: -10 to +40 degree C
Humidity: 15 to 85% RH
Notice (Soldering and Mounting)
2. Please contact us before use if concerning other soldering
conditions.
Allowable Temperature and Time of Reflow Soldering
260
250
Temperature (°C)
1. Reflow soldering
Soldering must be carried out without exceeding the
allowable soldering temperature and time shown within
the shaded area of Figure "Allowable Temperature and
Time of Reflow Soldering".
In case the soldering is repeated, the maximum time in
Figure "Allowable Temperature and Time of Reflow
Soldering" should be accumulated time. The standard
soldering conditions are shown in Figure "Reflow
Soldering Standard Conditions".
Follow standard pattern dimensions.
5. Please mount this product at the position so that stress
by wrap and/or bend of the PCB may not apply to it.
6. Please dry out this product immediately after soldering
and cleaning.
7. Please avoid the cleaning of this product for Microwave
Coaxial Connector with Switch.
230
220
210
200
190
180
30
60
90 120 150 180 210 240
Time (sec.)
Solder: Sn-3.0Ag-0.5Cu
Reflow Soldering Standard Conditions
3. In soldering, do not apply excessive mechanical force to
terminals or leads greater than specified in the drawing.
Peak temperature tp0
Temperature (°C)
4. Please note the following in case of soldering terminals or
leads of the product.
(1) Use Rosin based flux, but not with strong acid flux
(Chlorine content should be less than 0.20wt%).
(2) Flux should be cleaned thoroughly.
240
tp1
Pre-heating
t2
100
25
0
60 to 120 sec.
T1
Time (sec.)
tp0 (°C) tp1 (°C) T1 (sec.)
t2 (°C)
Standard soldering condition
240+0/-5 220 30 to 60 150 to 180
Resistance to soldering heat condition 260+5/-0 240
30max. 150 to 180
Measuring point of temperature: In-Out Terminals of the Device
Reflow Soldering: Both Convection and Infrared Rays
: Hot Air
: Hot Plate
35
O30E.pdf
Nov.1,2018
Cat. No. O30E-9
Global Locations
For details please visit www.murata.com
Note
1 Export Control
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law”
of Japan, the export license specified by the law
is required for export.
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
1
Aircraft equipment
2
Aerospace equipment
3
Undersea equipment
4
Power plant equipment
5
Medical equipment
6
Transportation equipment (vehicles, trains,
ships, etc.)
7
Traffic signal equipment
8
Disaster prevention / crime prevention
equipment
9
Data-processing equipment
10
Application of similar complexity and/or
reliability requirements to the applications
listed above
Murata Manufacturing Co., Ltd.
www.murata.com
3 Product specifications in this catalog are as of
June 2018. They are subject to change or our
products in it may be discontinued without
advance notice. Please check with our sales
representatives or product engineers before
ordering. If there are any questions, please contact
our sales representatives or product engineers.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
5 This catalog has only typical specifications.
Therefore, please approve our product
specifications or transact the approval sheet
for product specifications before ordering.
6 Please note that unless otherwise specified, we
shall assume no responsibility whatsoever for any
conflict or dispute that may occur in connection
with the effect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the effect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
工商网监
湘ICP备2023018690号
