MPDTY413S DATA Sheet
1
DC-DC Converter DATA Sheet
MPDTY413S
1. Features
・Up to 6A output current, non-isolated POL.
・Wide adjustable output voltage range by connecting external
resistance (0.7525V to 5.5V).
o
o
・Wide operating temperature(-40 C to +85 C).
・UVLO function / ON/OFF function, Over-current function and
Over temperature function are built in.
2. Appearance, Dimensions
20.3±0.2
11.4±0.2
M
PXK
(
)…reference value
P=2.54 ±0.2mm
□□□
6.2 max.
①②③
P
P
Marking
( 5.12 )
( 1.25 )
P
3
4
5
6
7 8
(1)
Pin No.1 Marking
/
MFG ID
(2)
Parts No.
PXK
(3)
Lot No.
□□□
①②③
①Production Factory
②Production Year
1 2
9
P
③Production Month(1,2,3,…9,O,N,D)
10
P
Flux may expand on PCB and attach onto the area where the marking is printed with laser.
In the case the marking become darker in color since flux is unreflecting.
It may be a little hard to read, however, the marking is not deleated nor blurred.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.12.15
MPDTY413S DATA Sheet
2
Pin Number and Function
Pin No.
Symbol
Function
1,2
Vin
Input Voltage
3,4
GND
GND
5,6
TRIM
Output Voltage Adjustment
7,8
Vout
Output Voltage
9,10
ON/OFF
Remote ON/OFF
3. Block Diagram
Vout
Vin
1,2
7,8
GND
3,4
3,4
GND
9,10
ON/OFF
5,6
Control Circuit
TRIM
4. Environmental Conditions
4.1 Operating Temperature Range
4.2 Storage Temperature Range
4.3 Operating Humidity Range
4.4 Storage Humidity Range
-40°C ~ +85°C
-40°C ~ +85°C
20% ~ 85% (No water condenses in any cases.)
10% ~ 90% (No water condenses in any cases.)
5.Absolute Maximum Rating
Item
Unit
Absolute Rating
Maximum Input Voltage
V
15V
ON/OFF Pin Voltage
V
Vin+0.3V
Remarks
※No voltage, no matter how instantaneous, shall be applied beyond the absolute maximum voltage rating to this
product. If you apply any voltage over this limit the product characteristics will deteriorate or the product itself will
be destroyed. Even though it may continue operating for a while after the over-voltage event, its life will likely be
shortened significantly. Reliability and life of the module may degrade similarly if the maximum operating voltage
rating is continuously exceeded. This product is designed to operate within the maximum operating voltage rating
specification.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.12.15
MPDTY413S DATA Sheet
3
6. Characteristics
o
6. 1 Electrical Characteristics (Ta=25 C)
Value
Item
Condition
Symbol
Min.
Typ.
Max.
Unit
Input Voltage Range
Vin
10.0
12.0
14.0
V
UVLO Threshold
UVLO
-
9.4
-
V
Output Voltage
Adjustable Range
Vout
0.7525
-
5.5
V
Vout=1.2V
1.164
1.2
1.236
Output Voltage Tolerance
Vo tol
Vout=5.0V
4.85
5.0
5.15
Vin=10~14V
Iout=0~6A
V
Output Current
Iout
See the thermal derating curve
in section 6.2.
0
-
6
A
Ripple Voltage
Vrpl
Vin =12V,Vout=2.5V,
Iout=6A, BW=20MHz
-
35
70
mV(pp)
Vout=2.5V
-
90
-
Efficiency
EFF
Vin =12V, Iout=6A
Vout=3.3V
-
94
-
-
400
-
kHz
%
Operating Frequency
Frq
ON/OFF pin High Voltage
VIH
If ON/OFF pin is connected to
Vin, the DC-DC converter shall
be “OFF”.
OFF
Vin-0.3
-
Vin
V
ON/OFF pin Low Voltage
VIL
If ON/OFF pin is connected to
GND, the DC-DC Converter
shall be “ON”.
ON
0
-
0.3
V
Short Circuit Protection
SCP
If output is shorted to GND , DC-DC converter shall be operated in a hiccup mode.
After the short circuit event has cleared, the output is automatically brought back
into regulation.
External Output Capacitor
Cout
When input voltage is ideal voltage
source
Output Rise Time
Tr
Rising Overshoot
Vover
Output Delay
Td
Vo=10%~90%
Vin High :ON/OFF High→Low
Vo=10%
47
-
1000
μF
-
4
-
msec
-
-
+10
%
-
5
-
msec
※Attention
If DC-DC converter with remote ON condition turns off by input voltage, the overshoot might be occurred at the
time output voltage falls down.
S.R. of remote voltage
0.2V/ms more at remote ON
50V/ms more at remote OFF
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.12.15
MPDTY413S DATA Sheet
4
6. 2 Thermal Derating
MPDTY413S
(Vin=12V、Vout=3.3V)
7
6
1.5m/s
1m/s
Iout[A]
5
4
0m/s
3
2
1
0
20
30
40
50
60
70
80
90
Ta[℃]
When using this product at the ambient air temperature of 55°C more, it is used by the following temperature
derating.
But when any other heat generating parts are close to this product, it may be over heated.
Please confirm that the MOSFET temperature is below 120°C、the inductor temperature is below 106°C to secure
operation reliability(see following fig).
temperature
measurement point
(inductor)
temperature
measurement point
(MOSFET)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.12.15
MPDTY413S DATA Sheet
5
7. Operation information
7.1. Adjusting the Output Voltage
The output voltage can be adjusted from 0.7525V to 5.5V by connecting resistors between TRIM-pin(5,6Pin) to
GND-pin.
The following equation gives the required external-resistor values to adjust the output voltage to the required Vout.
It is highly recommended that evaluation of the characteristics of this DC-DC converter’s operation under your
board conditions be thoroughly conducted.
MPDTY413S
Internal Circuit
Vout
15kΩ
TRIM
1kΩ
10500
-1000
Voadj[V]-0.7525[V]
RVAR=
[Ω]
Error amp
RVAR
200kΩ
GND
Voadj [V]
Calculated RVAR[Ω]
RVAR example
5
3.3
1472
3122
1.47 kΩ+2Ω
3kΩ+120Ω
2.5
1.8
5009
9024
4.99kΩ+20Ω
8.2kΩ+820Ω
1.5
13047
13kΩ+47Ω
1.2
0.7525
22464
22kΩ+470Ω
Open
∞
7.2. Thermal shutdown
This DC-DC converter thermally shuts down when temperature of a control IC reaches to 165℃ typically.
(hysteresis:20℃)
7.3. ON/OFF Control
Using the ON/OFF feature, the operation of this product can be disabled without removal of the input voltage.
Sequencing of a power supply system and power-saving control can be easily achieved using this function.
ON/OFF Control Operation
When ON/OFF-pin(9,10pin)are left open
When ON/OFF-pin(9,10pin) is connected to Vin
…… Output Voltage =ON
…… Output Voltage =OFF
Vin
or
MPDTY413S
9,10
3,4
GND
on/off
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.12.15
MPDTY413S DATA Sheet
6
7.4. Input External capacitor
It is recommended to connect a low-impedance electrolytic capacitor of 22μF or more at Vin terminal.
Smaller input capacitor may leads to an unstable operation of this product caused by input voltage
fluctuation. Please check the proper operation of it on your product when smaller input capacitor is used.
Using ceramic capacitors as input capacitor may cause an increase of output voltage, because input ripple
current flows through the external input capacitor and wiring resistance.
This phenomenon is affected by the position of external capacitors, the value of external capacitors and
voltage difference between Vin and Vout. Using low-impedance electrolytic capacitor will ease this problem.
Please check the proper operation of it on your product when ceramic input capacitor is used.
MPDTY413S
Vin
Cin
Vout
Ripple current
Rw×Irpl appears as additional
output ripple voltage.
Rw
Wiring resistance
7.5. Output External capacitor
Ceramic capacitors are recommended as output external capacitor.
Using ceramic capacitors, small output variation and small ripple voltage are realized.
Output capacitor should be within 47μF to 1000μF. Output capacitor shall be placed near the
output terminal. When using plural capacitors, please make sure to place a capacitor of at least
47μF near the output terminal, and place other capacitors near the load.
When using LC output filter, please make sure to place a capacitor of at least 47μF near the output
terminal.
8. Reliability
8.1. Humidity
According to JIS-C-0022.
40土2°C, 90 to 95%RH, 100 hours. Leave for 4 hours at room temperature.
No damage in appearance and no deviation from electrical characteristics (section 6.1.).
8.2. Temperature Cycles
Repeat cycle 5 times. Leave 2 hours at room temp.
No damage in appearance and no deviation from electrical characteristics (section 6.1.).
Step
Condition
Time
1
-40°C±3°C
30 minutes
2
Room Temp.
5-10 minutes
3
+85°C±2°C
30 minutes
4
Room Temp.
5-10 minutes
8.3. Vibration
10 to 55Hz, 1.5mm amplitude (1minute cycle), 1 hour for each of X, Y, Z directions.
No damage in appearance and no deviation from electrical characteristics (section 6.1.).
8.4. Mechanical Shock
20G, 1 time for each X, Y, Z directions.
No damage in appearance and no deviation from electrical characteristics (section 6.1.).
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.12.15
MPDTY413S DATA Sheet
7
9. Test Circuit
In the following test circuit, the initial values under item 6.1. should be met.
9.1. General Measure Circuit
1,
2
7,
8
C2
ON/OFF
47uF
MPDTY413S
RL
ceramic
Vin
5,
6
9,
10
C1
3,4
22uF ceramic
Vout
adjust
C1:22F/25V
Ceramic Capacitor
C2:47F/10V
Ceramic Capacitor
Please make sure to place C1 and C2 nearby input and output terminal of DC-DC converter.
9.2. Ripple Noise Measurement Circuit
Ripple Noise Measurement Circuit
Coaxial cable :1.5D-2V, L=1.5m
Oscilloscope
BW:20MHz
Vout
DC-DC Converter
GND
47uF ceramic capacitor
Terminator
(Keisokugiken TRC-50F)
Equivalent circuit
R:50ohm
C:0.01uF
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.12.15
MPDTY413S DATA Sheet
8
10. Packaging Specification
Emboss Tape Dimensions
(22.6)
6.3±0.1
0.4±0.05
20.6±0.1
4.0±0.1
20.2±0.1
2.0±0.15
44.0±0.3
16.0±0.1
+0.1
-0
40.4±0.1
φ 1.5
1.75±0.1
10.1.
(11.7)
φ 2.0
+0.1
-0
1.5
+0.1
-0
+0.1
-0
1.7
0.2
Pulling direction
10.2. Real Dimensions
49.4±1.0
45.4±1.0
φ 100±1
φ 330±2
A
2.0±0.5
表示
Indication
φ 21.0±0.8
φ 13.0±0.5
A部詳細図
Portion A
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.12.15
MPDTY413S DATA Sheet
9
10.3. Taping Specification
未実装部
Epmty portion
(1200mm MIN)
未実装部
Epmty portion
(200mm MIN)
リーダー部
Leader portion
(200mm MIN)
部品収納部
"Module on tape" portion
表示
Indication
φ 1.5mm丸穴側
引き出し方向
Pulling direction
M
M
M
1PinMARK
1Pinマーク
φ 1.5×1.7mm長穴側
モジュールはコイル面を上側、端子面を下側に配置します。
The module is located such as inductor in upper side and terminal in lower side.
10.4. Note
1. The adhesive strength of the protective tape must be within 0.1-1.3N.
(In accordance with JIS 0806-3)
2. Each reel contains 300pcs.
3.The deficiency per reel is 0 piece.
4. The reel shows customer part number, Murata part number and quantity.
5. The color of reel is not designated.
11. Production factory
Komatsu Murata Mfg.Co., Ltd.
Kanazu Murata Mfg. Co., Ltd.
Wakura Murata Mfg. Co., Ltd.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.12.15
MPDTY413S DATA Sheet
10
12. Characteristics Data
12.1. Vout=0.7525V
Output
Voltage
静的対負荷変動
0.768
0.763
Vo1 [V]
0.758
Vin=10V
Vin=12V
Vin=14V
0.753
0.748
0.743
0.738
0.733
0.728
0
1
2
3
4
5
6
Io [A]
Fig. 12-1-1. Output Voltage v.s. Output Current
Efficiency
変換効率
90
85
Eff [%]
80
75
Ta=25℃ Vin=10V
Ta=25℃ Vin=12V
Ta=25℃ Vin=14V
70
65
60
55
50
0
1.2
2.4
3.6
4.8
6
Io [A]
Fig. 12-1-2. Efficiency v. s. Output Current
Ripple
Voltage
出力リップルノイズ
50
Vr1 [mVp-p]
40
30
Vin=10V
Vin=12V
Vin=14V
20
10
0
0
1.2
2.4
3.6
4.8
6
Io [A]
Fig. 12-1-3. Ripple Voltage v. s. Output Current
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.12.15
MPDTY413S DATA Sheet
11
12.2. Vout=3.3V
Output
Voltage
静的対負荷変動
3.38
Vo1 [V]
3.35
3.32
Vin=10V
Vin=12V
Vin=14V
3.29
3.26
3.23
3.20
0
1
2
3
4
5
6
Io [A]
Fig. 12-2-1. Output Voltage v.s. Output Current
Efficiency
変換効率
100
95
Eff [%]
90
85
Ta=25℃ Vin=10V
Ta=25℃ Vin=12V
Ta=25℃ Vin=14V
80
75
70
65
60
0
1
2
3
4
5
6
Io [A]
Fig. 12-2-2. Efficiency v. s. Output Current
Ripple
Voltage
出力リップルノイズ
80
Vr1 [mVp-p]
70
60
Vin=10V
Vin=12V
Vin=14V
50
40
30
20
10
0
1
2
3
4
5
6
Io [A]
Fig. 12-2-3. Ripple Voltage v. s. Output Current
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.12.15
MPDTY413S DATA Sheet
12
12.3. Vout=5.5V
Output
Voltage
静的対負荷変動
5.670
5.620
Vo1 [V]
5.570
Vin=10V
Vin=12V
Vin=14V
5.520
5.470
5.420
5.370
5.320
0
1
2
3
4
5
6
Io [A]
Fig. 12-3-1. Output Voltage v.s. Output Current
Efficiency
変換効率
100
95
Eff [%]
90
85
Ta=25℃ Vin=10V
Ta=25℃ Vin=12V
Ta=25℃ Vin=14V
80
75
70
65
60
0
1
2
3
4
5
6
Io [A]
Fig. 12-3-2. Efficiency v. s. Output Current
Ripple
Voltage
出力リップルノイズ
110
Vr1 [mVp-p]
100
90
80
Vin=10V
Vin=12V
Vin=14V
70
60
50
40
30
20
0
1
2
3
4
5
6
Io [A]
Fig. 12-3-3. Ripple Voltage v. s. Output Current
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.12.15
MPDTY413S DATA Sheet
13
13. Mounting Condition
13.1. PCB Land Pattern Recommendation
4.06
TRIM
4.83
GND
0.25
11.4
8.64
VOUT
4.06
8.89
4.57
ON/OFF
1.5
VIN
17.52
1.3
20.3
Recommendable Land Size
×
13.2. Recommended Soldering Conditions
Reflow Soldering
This product is RoHS compliant. The following profile is recommended for the reflow of this
product using Pb-free solder paste (Sn-Ag-Cu).
Method
:
Full convection reflow soldering
Reflow Soldering Profile
JEDEC IPC/JEDEC J-STD-020D
Table 5-2 Classification Reflow Profile
Pb-Free Assembly Large Body
Profile details
Soldering temperature
Soldering time
Heating time
Preheating time
Programming rate
Descending rate
Total soldering time
Times
:
:
:
:
:
:
:
:
245ºC+0/-5ºC
30 seconds, 240 to 245ºC
60 to 150 seconds, over217ºC
60 to 120 seconds,150 to 200ºC
3ºC/ sec. Max., 217 to 245ºC
6ºC/ sec. Max.
8 minutes Max., 25 to 245ºC
1 time
2 4 5o C
217 oC
Parts surface temperature [ºC]
200 oC
60~150
(seconds)
1 5 0 oC
60~120 (seconds)
Times
※Do not vibrate for the products on reflow.
Please need to take care temperature control because mounted parts may come off if the product are left
under the high temperature.
Do not reflow DC-DC converter as follows, because DC-DC converter may fall down from a substrate
during reflowing
Substrate
DC-DC Converter
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.12.15
MPDTY413S DATA Sheet
14
14. Notice
14. 1. Both input-side and output side, please make the wiring loop between plus and minus as small as possible.
The influence of a leakage inductance can be reduced.
14. 2. Please make the power line pattern as wide and short as possible.
The Following figure is an example of recommendable PCB design.
10 9
Vout
8
7
6
5
4
3
GND (Vin)
C1
C2
GND (Vout)
2
1
Vin
14. 3. This product should not be operated in parallel or in series.
14. 4. Please do not use a connector or a socket to connect this product to your product.
The electric characteristics may be deteriorated by the influence of contact resistance.
14. 5. Be sure to provide an appropriate fail-safe function on your product to prevent secondary damage
that may be caused due to abnormal functional or failure of this product.
14. 6. Inrush current protection is not a feature of this product.
14. 7. Please connect the input terminals with the correct polarity. If an error in polarity connection is made this
product may be damaged. If this product is damaged internally, an elevated input current may flow, and so
this product may exhibit an abnormal temperature rise, or your product may be damaged.
Please add a diode and fuse per the following diagram to protect them.
fuse
+
+
+
diode
IN
-
OUT
Load
-
※Please select diode and fuse after confirming the operation of your product.
14. 8. Cleaning
Please use no-cleaning type flux and do not wash this product.
14.9. Storage
14.9.1. Please store the products in room where the temperature/humidity is stable and direct sunlight cannot
come in, and use the products within 6 months after delivery.
Please avoid damp and heat or such places where the temperature greatly changes, as water may
condense on this product, and the quality of characteristics may be reduced, and/or be the solderability
may be degraded.
If this product needs to be stored for a long time (more than 1 year), this product may be degraded in
solderability and/or corroded. Please test the solderability of this product regularly.
Baking before reflow process is unnecessary to store the products under 30℃,60%RH or less up to 6
months.
In case the storage condition is over above mentioned, if these are unpacked condition, please bake them
at 125℃±5℃/24hour. If these are packed in a tape, please bake them before soldering at 60℃±5℃
/168hour.
14.9.2. Please do not store this product in places such as :
A dusty place, a place exposed directly to sea breeze, or in an atmosphere containing corrosive gas
(Cl2,NH3,SO2,NOX and so on).
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.12.15
MPDTY413S DATA Sheet
15
14. 10 Operational Environment and Operational Conditions
14. 10. 1. Operational Environment
This product is not water-, chemical- or corrosion-proof.
In order to prevent leakage of electricity and abnormal temperature rise of the product, do not operate
under the following environmental conditions:
(1) An atmosphere containing corrosive gas (Cl2, NH3, SO2, NOX and so on)
(2) A high-dust environment
(3) Under the exposure of direct sunlight
(4) A location where the likelihood of exposure to water or water condensation exists.
(5) A location exposed to ocean air
(6) Any locations similar to the above
14. 10. 2. Operational Conditions
Please use this product within specified values (power supply, temperature, input, output and load
condition, and so on). If the product is exposed to conditions outside of the specified values reliability of
the product may be adversely effected.
14. 10. 3. Note prior to use
Diminished reliability and/ or failure may result if the product is exposed to a high-level static charge,
over-rated voltage or reverse voltage. Please avoid the following conditions be avoided prior to use of
the product:
(1) Supply of power outside of rated values (see section 8)
(2) Supply of reverse power or inadequate connection of a 0 V(DC)line
(3) Electrostatic discharge from production line and/ or operator
(4) Electrification of the product from electrostatic induction
(5) Excessive mechanical shock
14. 11. Transportation
Murata recommends that when transporting this product, it be packed so as to avoid damage by
mechanical
vibration or exposure to adverse conditions such as ocean air, high humidity. It is additionally
recommended
that appropriate instructions and guidelines be communicated to carriers to prevent exposure to these
same conditions.
!
Note
1. Murata recommends that customers ensure that the evaluation and testing of these devices are completed
withthis product actually assembled on their product.
2. Please contact our main sales office or nearby sales office before using our products for the applications
listed below which require especially high reliability for the prevention of defects which might directly
cause damage to the third party’s life, body or property or this products for any other applications that
described in the above.
①Aircraft equipment
②Aerospace equipment
③Undersea equipment
④Power plant control equipment
⑤Medical equipment
⑥Transportation equipment (vehicles, trains, ships, etc.)
⑦Traffic signal equipment
⑧Disaster prevention /crime prevention equipment
⑨Data-processing equipment
⑩Application of similar complexity and/or reliability requirements to the applications listed in the above.
3. This DATA Sheet is indicated in March. 2009. About the written contents, since changing without a
preliminary announcement for improvement and supply are sometimes stopped, please confirm in case of
ordering.
If written contents are unknown, please ask to our main sales office or nearby sales office.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.12.15