0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
MTU1S0512MC-R

MTU1S0512MC-R

  • 厂商:

    MURATA-PS(村田)

  • 封装:

    -

  • 描述:

    Isolated Module DC DC Converter 1 Output 12V 83mA 4.5V - 5.5V Input

  • 数据手册
  • 价格&库存
MTU1S0512MC-R 数据手册
MTU1 Series www.murata.com Isolated 1W Single & Dual Output SM DC-DC Converters „ 1kVDC isolation “Hi Pot Test” „ Efficiency up to 88% (Typ.) „ MSL level 1 „ Power density 1.71W/cm3 „ Wide temperature performance at full 1 Watt load, –40°C to 85°C „ UL 94V-0 package material „ 5V & 12V inputs „ 5V, 9V, 12V & 15V single & dual outputs „ Toroidal magnetics „ Custom solutions available kHrs 60 25 25 25 40 20 20 241 233 230 230 99 229 94 80 83 84 84 80 83 84 83 86 87 87 84 86 88 19 20 21 22 22 21 35 5664 5488 5186 4773 5641 5078 4834 14 26 15 10 10 30 60 25 25 25 235 367 96 95 95 81 79 82 83 84 84 81 87 88 88 18 14 31 40 35 5053 7660 5467 5165 4753 NTA0505MC NXE1S0305MC NTE1209MC NTE1212MC NTE1215MC 18 8 8 14 7 8 35 20 20 30 20 20 356 228 224 98 95 94 80 83 84 80 82 84 83 87 88 85 87 88 17 19 22 18 27 35 5292 5545 5293 4335 4601 4782 NKA0305SC NKA0512SC NKA0515SC NKA1205SC NKA1209SC NKA1215SC MTU1S0505MC MTU1S0509MC MTU1S0512MC MTU1S0515MC MTU1S1205MC MTU1D0509MC MTU1D1212MC 5 5 5 5 12 5 12 5 9 12 15 5 ±9 ±12 200 111 83 67 200 ±56 ±42 7.3 6.1 5.6 5.3 5.6 5.6 3.0 9 7.5 7.5 6.5 8 6.5 4 35 15 15 15 20 7 8 MTU1D0505MC MTU1S0305MC MTU1S1209MC MTU1S1212MC MTU1S1215MC 5 3.3 12 12 12 ±5 5 9 12 15 ±100 200 111 83 67 6.6 8.9 3.9 3.5 3.2 8 11.0 6 6 5 MTU1D0305MC MTU1D0512MC MTU1D0515MC MTU1D1205MC MTU1D1209MC MTU1D1215MC 3.3 5 5 12 12 12 ±5 ±100 ±12 ±42 ±15 ±33 ±5 ±100 ±9 ±56 ±15 ±33 8.0 5.0 5.1 4.3 3.1 2.6 9.5 6 6.5 5 4 3.5 % mVp-p Recommended Alternative pF Load Regulation (Typ.) Load Regulation (Max) Ripple & Noise (Typ.)3 Ripple & Noise (Max.)3 % mA INPUT CHARACTERISTICS Parameter PRODUCT OVERVIEW For full details go to https://www.murata.com/englobal/products/power/rohs % V Voltage range The devices are suitable for all applications where high volume production is envisaged. mA V „ Multi-layer ceramic capacitors The MTU1 series is a new range of miniature surface mount, high performance 1W DC-DC converters. With a footprint reduction of over 50% from the previous generation of 1W SMD DC-DC, the MTU1 series offers 1W of available output power over the full industrial temperature range of -40ºC to 85ºC. The MTU1 series is more efficient and offers improved regulation performance for applications where a wide output voltage variation can not be tolerated. MTTF2 „ Single & dual isolated output Isolation Capacitance „ Footprint over pins 0.69cm2 Efficiency (Typ.) „ UL60950 recognised Efficiency (Min.) „ Patent protected Input Current at Full Load FEATURES Nominal Input Voltage Output Voltage Order Code1 Output Current SELECTION GUIDE Reflected ripple current Conditions Min. Typ. Max. Units Continuous operation, 3.3V input types Continuous operation, 5V input types Continuous operation, 12V input types 3.3V input types Single output types 5V input types 12V input types Dual output types All variants 2.97 4.5 10.8 3.3 5.0 12.0 10 6 5 5 3.63 5.5 13.2 V Typ. Max. Units 1.0 W 1.0 1.1 %/% Typ. Max. Units mA p-p OUTPUT CHARACTERISTICS Parameter Conditions Rated power TA=-40°C to 85°C See tolerance envelope High VIN to low VIN Voltage set point accuracy Line regulation Min. ISOLATION CHARACTERISTICS Parameter Conditions Min. Isolation voltage Resistance Flash tested for 1 second Viso= 1000VDC 1000 10 VDC GΩ 1. If components are required in tape and reel format suffix order code with -R, e.g. MTU10505MC-R. 2. Calculated using MIL-HDBK-217 FN2 calculation model with nominal input voltage at full load. 3. See ripple & noise characterisation method. All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified. www.murata.com KDC_MTU.I01 Page 1 of 10 MTU1 Series Isolated 1W Single & Dual Output SM DC-DC Converters GENERAL CHARACTERISTICS Parameter Conditions Switching frequency MTU1D0305MC 3.3V & 5V input, all output types (except MTU1D0305MC) 12V input, single output types 12V intput, dual output types Min. Typ. Max. Units 70 82 kHz 90 100 TEMPERATURE CHARACTERISTICS Parameter Conditions Min. Specification Storage All output types (see safety approval section for limitations) -40 -55 Case temperature rise above ambient1 Cooling MTU1xxx05MC MTU1xxx09MC MTU1xxx12MC & MTU1xxx15MC Free air convection Typ. Max. Units 85 125 15 14 11 °C ABSOLUTE MAXIMUM RATINGS Input voltage VIN, MTU1S03 types Input voltage VIN, MTU1S05 types Input voltage VIN, MTU1S12 types 5.5V 7V 15V 1. Measured after 1 hour continuous operation at nominal VIN full load at the center of each PCB. www.murata.com KDC_MTU.I01 Page 2 of 10 MTU1 Series Isolated 1W Single & Dual Output SM DC-DC Converters TECHNICAL NOTES ISOLATION VOLTAGE ‘Hi Pot Test’, ‘Flash Tested’, ‘Withstand Voltage’, ‘Proof Voltage’, ‘Dielectric Withstand Voltage’ & ‘Isolation Test Voltage’ are all terms that relate to the same thing, a test voltage, applied for a specified time, across a component designed to provide electrical isolation, to verify the integrity of that isolation. Murata Power Solutions MTU1 series of DC-DC converters are all 100% production tested at their stated isolation voltage. This is 1kVDC for 1 second. A question commonly asked is, “What is the continuous voltage that can be applied across the part in normal operation?” The MTU1 has been recognised by Underwriters Laboratory for functional insulation, both input and output should normally be maintained within SELV limits i.e. less than 42.4V peak, or 60VDC. The isolation test voltage represents a measure of immunity to transient voltages and the part should never be used as an element of a safety isolation system. The part could be expected to function correctly with several hundred volts offset applied continuously across the isolation barrier; but then the circuitry on both sides of the barrier must be regarded as operating at an unsafe voltage and further isolation/insulation systems must form a barrier between these circuits and any user-accessible circuitry according to safety standard requirements. REPEATED HIGH-VOLTAGE ISOLATION TESTING It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on materials, construction and environment. The MTU1 series has toroidal isolation transformers, with no additional insulation between primary and secondary windings of enamelled wire. While parts can be expected to withstand several times the stated test voltage, the isolation capability does depend on the wire insulation. Any material, including this enamel (typically polyurethane) is susceptible to eventual chemical degradation when subject to very high applied voltages thus implying that the number of tests should be strictly limited. We therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be reduced by 20% from specified test voltage. This consideration equally applies to agency recognised parts rated for better than functional isolation where the wire enamel insulation is always supplemented by a further insulation system of physical spacing or barriers. SAFETY APPROVAL The MTU1 series has been recognised by Underwriters Laboratory (UL) to UL 60950 for functional insulation to a maximum product PCB temperature of 120°C. Forced air cooling may be used to maintain this temperature requirement. File number E151252 applies. The MTU1 Series of converters are not internally fused so to meet the requirements of UL 60950 an anti-surge input line fuse should always be used with ratings as defined below. MTU1X03xxxC: 0.750A MTU1X05xxxC: 0.125A MTU1X12xxxC: 0.315A All fuses should be UL approved and rated to at least the maximum allowable DC input voltage. RoHS COMPLIANCE INFORMATION This series is compatible with RoHS soldering systems with a peak reflow solder temperature of 245ºC as per J-STD-020D.1. Please refer to application notes for further information. The pin termination finish on this product series is Matte Tin over Nickel Preplate. The series is backward compatible with Sn/Pb soldering systems. The series has a Moisture Sensitivity Level (MSL) 1. Samples of the product series were tested in accordance with the conditioning described for MSL level 1 in IPS/J-STD-020D.1. The product series passed electrical tests and visual inspection criteria. For further information, please visit: www.murata-ps.com/rohs PART NUMBER STRUCTURE MTU 1 X XX XX M C -RXX Series name Packaging code Power rating R7 - 7 inch reel R13 - 13 inch reel Output type RoHS compliant S - Single D - Dual T - Triple Q - Quad Input voltage Package type S - SIP D - DIP M - Surface mount Z - ZIP Output voltage www.murata.com KDC_MTU.I01 Page 3 of 10 MTU1 Series Isolated 1W Single & Dual Output SM DC-DC Converters CHARACTERISATION TEST METHODS Ripple & Noise Characterisation Method Ripple and noise measurements are performed with the following test configuration. C1 1μF X7R multilayer ceramic capacitor, voltage rating to be a minimum of 3 times the output voltage of the DC-DC converter 10μF tantalum capacitor, voltage rating to be a minimum of 1.5 times the output voltage of the DC-DC converter with an ESR of less than 100mΩ at 100 kHz C3 100nF multilayer ceramic capacitor, general purpose R1 450Ω resistor, carbon film, ±1% tolerance R2 50Ω BNC termination T1 3T of the coax cable through a ferrite toroid RLOAD Resistive load to the maximum power rating of the DC-DC converter. Connections should be made via twisted wires Measured values are multiplied by 10 to obtain the specified values. C2 Differential Mode Noise Test Schematic DC/DC Converter OSCILLOSCOPE C1 C2 C3 + SUPPLY Input - + R1 T1 R2 Y INPUT Output - R LOAD APPLICATION NOTES Minimum load The minimum load to meet datasheet specification is 10% of the full rated load across the specified input voltage range. Lower than 10% minimum loading will result in an increase in output voltage, which may rise to typically double the specified output voltage if the output load falls to less than 5%. Capacitive loading and start up Typical start up times for this series, with a typical input voltage rise time of 2.2μs and output capacitance of 10μF, are shown in the table below. The product series will start into a capacitance of 47μF with an increased start time, however, the maximum recommended output capacitance is 10μF. MTU1S0305MC MTU1S0505MC MTU1S0509MC MTU1S0512MC MTU1S0515MC MTU1S1205MC MTU1S1209MC MTU1S1212MC MTU1S1215MC Start-up time ms 1.7 0.9 2.7 4.3 7.5 0.9 1.9 3.3 4.7 MTU1D0305MC MTU1D0505MC MTU1D0509MC MTU1D0512MC MTU1D0515MC MTU1D1205MC MTU1D1209MC MTU1D1212MC MTU1D1215MC Start-up time ms 3.1 1.8 5.7 10.1 19.1 1.5 4 7.5 12.5 Typical Start-Up Wave Form www.murata.com KDC_MTU.I01 Page 4 of 10 MTU1 Series Isolated 1W Single & Dual Output SM DC-DC Converters APPLICATION NOTES (Continued) Output Ripple Reduction By using the values of inductance and capacitance stated, the output ripple at the rated load is lowered to 5mV p-p max. Component selection Capacitor: It is required that the ESR (Equivalent Series Resistance) should be as low as possible, ceramic types are recommended. The voltage rating should be at least twice (except for 15V output), the rated output voltage of the DC-DC converter. Inductor: The rated current of the inductor should not be less than that of the output of the DC-DC converter. At the rated current, the DC resistance of the inductor should be such that the voltage drop across the inductor is 20MHz. L Power Source DC C DC Load MTU1S0305MC MTU1S0505MC MTU1S0509MC MTU1S0512MC MTU1S0515MC MTU1S1205MC MTU1S1209MC MTU1S1212MC MTU1S1215MC MTU1D0305MC MTU1D0505MC MTU1D0509MC MTU1D0512MC MTU1D0515MC MTU1D1205MC MTU1D1209MC MTU1D1212MC MTU1D1215MC L, μH 10 10 22 47 47 10 22 47 47 10 10 22 47 47 10 22 47 47 Inductor SMD 82103C 82103C 82223C 82473C 82473C 82103C 82223C 82473C 82473C 82103C 82103C 82223C 82473C 82473C 82103C 82223C 82473C 82473C Through Hole 11R103C 11R103C 11R223C 11R473C 11R473C 11R103C 11R223C 11R473C 11R473C 11R103C 11R103C 11R223C 11R473C 11R473C 11R103C 11R223C 11R473C 11R473C Capacitor C, μF 10 4.7 2.2 1 1 4.7 2.2 1 1 10 4.7 2.2 1 1 4.7 2.2 1 1 www.murata.com KDC_MTU.I01 Page 5 of 10 MTU1 Series Isolated 1W Single & Dual Output SM DC-DC Converters TOLERANCE ENVELOPES The voltage tolerance envelopes show typical load regulation characteristics for this product series. The tolerance envelope is the maximum output voltage variation due to changes in output loading and set point accuracy. 3.3V Input Types Single 5V output types (except 3.3V input) 4% Output Voltage Output Voltage 9% 1% -4% 10 25 6% 1.5% 0% -4% 100 75 50 Output Load Current (%) 10 25 Dual 5V output types (except 3.3V input) 50 75 Output Load Current (%) 100 121505 & 241505 2% Output Voltage Output Voltage 7% 1% -4% 10 25 75 50 Output Load Current (%) 5% 1% 0% -4% 10 100 25 50 75 100 Output Load Current (%) TEMPERATURE DERATING GRAPH 1.5 85°C Output Power (W) 1.0 0.5 0 -40 Safe Operating Area 100 50 0 Ambient Temperature (°C) 150 www.murata.com KDC_MTU.I01 Page 6 of 10 MTU1 Series Isolated 1W Single & Dual Output SM DC-DC Converters EFFICIENCY VS LOAD MTU1x03xxMC MTUx05xxMC 90 90 80 80 70 3.3V Dual Output 3.3V Single Output 60 Efficiency (%) Efficiency (%) 70 50 40 30 50 40 30 20 20 10 10 0 15V 12V 9V 5V 60 0 0 10 20 30 40 50 60 Load (%) 70 80 90 100 110 90 100 0 10 20 30 40 50 60 Load (%) 70 80 90 100 MTU1x12xxMC 90 80 Efficiency (%) 70 15V 12V 9V 5V 60 50 40 30 20 10 0 0 10 20 30 40 50 60 Load (%) 70 80 www.murata.com KDC_MTU.I01 Page 7 of 10 MTU1 Series Isolated 1W Single & Dual Output SM DC-DC Converters PACKAGE SPECIFICATIONS MECHANICAL DIMENSIONS PIN CONNECTIONS 8.20 (0.323) 2.54 (0.100) 6 4 5 Pin 1 3 4 5 6 3 1 1.56 (0.061) Pin 5.08 (0.200) 1 3 4 5 6 8.40±0.45 (0.331±0.018) Single Output Types Function +VIN -VIN NC OV +VOUT Dual Output Types Function +VIN -VIN -VOUT OV +VOUT +0.000 8.50 +0.00 -0.20 ( 0.335-0.008 ) S 0.3 (0.012) (Typ.) 0.25±0.1 (0.01) 0.60±0.1 (0.024) x5 PINS 0.10 (0.004) S SEATING PLANE 1.80±0.2 (0.071) 1.80±0.2 (0.071) All dimensions in mm ±0.25mm (inches ±0.01). All pins on a 2.54 (0.1) pitch and within 0.25 (0.01) of true position. Weight: 0.75g, typ. TUBE OUTLINE DIMENSIONS RECOMMENDED FOOTPRINT DETAILS 6.50 (0.256) 2.54 (0.100) 2.54 (0.100) 1.00 (0.039) 2.60 (0.102) Unless otherwise stated all dimensions in mm (inches). Tube length: 520mm {20.472) ±2.00 (0.079). Tube Quantity: 60 www.murata.com KDC_MTU.I01 Page 8 of 10 MTU1 Series Isolated 1W Single & Dual Output SM DC-DC Converters TAPE & REEL SPECIFICATIONS REEL OUTLINE DIMENSIONS REEL PACKAGING DETAILS TAPE OUTLINE DIMENSIONS Unless otherwise stated all dimensions in mm (inches). Controlling dimension is mm. Components shall be orientated within the carrier tape as indicated. Reel Quantity: 400 pcs. www.murata.com KDC_MTU.I01 Page 9 of 10 MTU1 Series Isolated 1W Single & Dual Output SM DC-DC Converters DISCLAIMER Unless otherwise stated in the datasheet, all products are designed for standard commercial and industrial applications and NOT for safety-critical and/or life-critical applications. Particularly for safety-critical and/or life-critical applications, i.e. applications that may directly endanger or cause the loss of life, inflict bodily harm and/or loss or severe damage to equipment/property, and severely harm the environment, a prior explicit written approval from Murata is strictly required. Any use of Murata standard products for any safety-critical, life-critical or any related applications without any prior explicit written approval from Murata shall be deemed unauthorised use. These applications include but are not limited to: • Aircraft equipment • Aerospace equipment • Undersea equipment • Power plant control equipment • Medical equipment • Transportation equipment ( automobiles, trains, ships, etc.) • Traffic signal equipment • Disaster prevention / crime prevention equipment • Data Processing equipment Murata makes no express or implied warranty, representation, or guarantee of suitability, fitness for any particular use/purpose and/or compatibility with any application or device of the buyer, nor does Murata assume any liability whatsoever arising out of unauthorised use of any Murata product for the application of the buyer. The suitability, fitness for any particular use/purpose and/or compatibility of Murata product with any application or device of the buyer remain to be the responsibility and liability of the buyer. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards that anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm, and take appropriate remedial actions. Buyer will fully indemnify and hold Murata, its affiliated companies, and its representatives harmless against any damages arising out of unauthorised use of any Murata products in any safety-critical and/ or life-critical applications. Remark: Murata in this section refers to Murata Manufacturing Company and its affiliated companies worldwide including, but not limited to, Murata Power Solutions. This product is subject to the following operating requirements and the Life and Safety Critical Application Sales Policy: Refer to: https://www.murata.com/en-eu/products/power/requirements Murata Power Solutions (Milton Keynes) Ltd. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2022 Murata Power Solutions (Milton Keynes) Ltd. www.murata.com KDC_MTU.I01 Page 10 of 10
MTU1S0512MC-R 价格&库存

很抱歉,暂时无法提供与“MTU1S0512MC-R”相匹配的价格&库存,您可以联系我们找货

免费人工找货