MXLAB3LA1000

Preliminary Specification of COAXIAL CONNECTOR Preliminary SPEC No. : NMM04-PL0003A Part Number : MXLAB3LA1000 SPECIFICATION 1. MECHANICAL A> Written by H. Kitaguchi Checked by Y. Kurasawa Date 27/Dec./2013 Revised A: 11/Jul./’16 KT *1 *2 X L 0 +/- 45 degree See X Scale: Free Tolerances Unless Otherwise Specified +/- 0.3 Unit: mm *1: Connector: LSC right angle plug connector *2: Cable L 100 +/- 3 2. CABLE : 2.1 2.2 2.3 2.4 2.5 Item Voltage Rating Nominal Frequency Range Nominal Impedance Temperature Rating Used Cable Item Specification 30V r.m.s. maximum DC to 6 GHz 50 -40C to +85C 0.2D Single shield PFA cable Unit Inner conductor Material No. and Dia. Total Dia. Insulator Construction (No./mm) (mm) Silver plated copper alloy wire 7/0.03 0.09 Material Total Dia. (mm) PFA 0.24 Outer conductor Material Dia. of wire (mm) Silver plated copper alloy wire 0.03 Sheath Material Nominal thickness. (mm) PFA(Black) 0.05 Overall Dia. (mm) 0.49 Minimum Bending Radius (mm) 2.0 Nominal Insertion loss dB/m at 1GHz dB/m at 2GHz dB/m at 3GHz dB/m at 4GHz dB/m at 6GHz 5.10 7.08 8.54 9.79 11.88 1/2 Preliminary Specification of COAXIAL CONNECTOR Preliminary SPEC No. : NMM04-PL0003A Part Number : MXLAB3LA1000 Written by Checked by Date H. Kitaguchi Y. Kurasawa 27/Dec./2013 3. NOTE A> Use tool part# M19608. The connector to be engaged and disengaged should be inserted or pulled out to the vertical direction. 4. ! CAUTION Limitation of Applications Please do not use our products for the applications listed below which require specially high reliability for the prevention of defects which may directly or indirectly cause damage to the third party's life, body or property. (1) Aircraft equipment (2) Aerospace equipment (3) Undersea equipment (4) Power plant control equipment (5) Medical equipment (6) Transportation equipment (vehicles, trains, ships, etc.) (7) Traffic signal equipment (8) Disaster prevention / crime prevention equipment (9) Data-processing equipment (10) Application of similar complexity and/or reliability requirements to the applications listed in the above. 2/2