Reference Only
Spec. No. JENF243D-0007P-01
P 1/ 12
Chip EMIFIL LC Combined Array Type
NFA18S□□□□□1A45□ Reference Specification
1. Scope
This reference specification applies to Chip EMIFIL LC Combined Array Type NFA18S Series.
2. Part Numbering
NF
A
18
SL
307
V
1A
4
5
L
Product ID Structure Dimension Features Cut-off Frequency Characteristics Rated Voltage Electrode Dimension Packaging Code
(LW)
(T) (L: Taping / B: Bulk)
3. Rating
Customer
Part Number
Cut-off
Frequency
[MHz]
MURATA
Part Number
NFA18SL307V1A45L
NFA18SL307V1A45B
NFA18SL407V1A45L
NFA18SL407V1A45B
NFA18SL487V1A45L
NFA18SL487V1A45B
300
MHz
Insulation Rated
Insertion Loss (I.L.)(dB )
Rated
Withstanding
Voltage
400
480
800
900 Resistance Voltage Current
[V(DC)]
MHz MHz MHz MHz [M min.] [V(DC)] [mA(DC)]
300
6
max.
-
-
400
-
6
max.
-
480
-
-
6
max.
NFA18SL307V1A45□ : 22pF (typ.)
NFA18SL407V1A45□ : 15pF (typ.)
NFA18SL487V1A45□ : 8pF (typ.)
20
min.
18
min.
15
min.
20
min.
18
min.
15
min.
1000
10
100
30
1000
10
100
30
1000
10
100
30
NFA18SL307V1A45□ : 23 nH (typ.)
NFA18SL407V1A45□ : 23 nH (typ.)
NFA18SL487V1A45□ : 23 nH (typ.)
Operating Temperature : -55°C to +125°C (Includes self-heating.)
Storage Temperature: -55°C to +125°C
Customer
Part Number
MURATA
Part Number
Insertion Loss (I.L.)(dB)
Insulation
Cut-off
2 Resistance
Frequency 130 180 200 350 470 900
[MHz]
MHz MHz MHz MHz MHz MHz GHz [MΩmin.]
NFA18SL137V1A45L
NFA18SL137V1A45B
NFA18SL187V1A45L
NFA18SL187V1A45B
NFA18SL207V1A45L
NFA18SL207V1A45B
NFA18SL357V1A45L
NFA18SL357V1A45B
Rated
Rated Withstanding
Voltage Current
Voltage
[V(DC) [mA(DC)]
[V(DC)]
130
6
max
-
-
-
25
min
25
min
-
1000
10
50
30
180
-
6
max
-
-
20
min
20
min
-
1000
10
50
30
200
-
-
6
max
-
15
min
15
min
-
1000
10
50
30
350
-
-
-
6
max
-
15
min
13
min
1000
10
35
30
NFA18SL137V1A45□: 40pF(typ.)
NFA18SL187V1A45□: 22pF(typ.)
NFA18SL207V1A45□: 15pF(typ.)
NFA18SL137V1A45□: 60nH(typ.)
NFA18SL187V1A45□: 60nH(typ.)
NFA18SL207V1A45□: 60nH(typ.)
NFA18SL357V1A45□: 4pF(typ.)
NFA18SL357V1A45□: 50nH(typ.)
Operating Temperature : -40°C to +85°C (Includes self-heating.)
Storage Temperature: -40°C to +85°C
MURATA
Part Number
Cut-off
Frequency
[MHz]
NFA18SL506X1A45L
NFA18SL506X1A45B
50
Customer
Part Number
Insertion Loss (I.L.)(dB )
50
500
1
MHz
MHz
GHz
6 max.
NFA18SL506X1A45□:73pF(typ.)
30 min.
25 min.
Insulation Rated
Rated
Withstanding
Resistance Voltage Current
Voltage
[V(DC)]
[M min.] [V(DC)] [mA(DC)]
1000
10
25
NFA18SL506X1A45□:110nH(typ.)
Operating Temperature : -40°C to +85°C (Includes self-heating.)
Storage Temperature: -40°C to +85°C
MURATA MFG.CO., LTD.
30
Reference Only
Spec. No. JENF243D-0007P-01
MURATA
Part Number
Cut-off
Frequency
[MHz]
NFA18SL227V1A45L
NFA18SL227V1A45B
220
Customer
Part Number
6 max.
30 min.
NFA18SL227V1A45□:27pF(typ.)
30 min.
P 2/ 12
Insulation Rated
Rated
Withstanding
Resistance Voltage Current
Voltage
[V(DC)]
[M min.] [V(DC)] [mA(DC)]
Insertion Loss (I.L.)(dB )
220
900
2
MHz
MHz
GHz
1000
10
25
30
NFA18SL227V1A45□:65nH(typ.)
Operating Temperature : -40°C to +85°C (Includes self-heating.)
Storage Temperature: -40°C to +85°C
Customer
Part Number
Insertion Loss (I.L.)(dB )
Insulation Rated
Cut-off
Rated
Withstanding
Resistance Voltage Current
Frequency 180 200 500 900 1.5
Voltage
2
[MHz]
[V(DC)]
MHz MHz MHz MHz GHz GHz [M min.] [V(DC)] [mA(DC)]
MURATA
Part Number
NFA18SD187X1A45L
180
NFA18SD187X1A45B
NFA18SD207X1A45L
NFA18SD207X1A45B
200
6
15
20 20 20
-
max.
max. min. min. min.
6
13
20 20 20
-
max. min. min. min. min.
NFA18SD187X1A45□:22pF(typ.)
NFA18SD207X1A45□:15pF(typ.)
1000
10V
25
30
1000
10V
25
30
NFA18SD187X1A45□:90nH(typ.)
NFA18SD207X1A45□:90nH(typ.)
Operating Temperature : -40°C to +85°C (Includes self-heating.)
Storage Temperature: -40°C to +85°C
4. Standard Testing Condition
< Unless otherwise specified >
Temperature : Ordinary Temp. / 15 °C to 35 °C
Humidity: Ordinary Humidity / 25 %( RH) to 85 %( RH)
5. Style and Dimensions
NFA18SL307/407/487
(Top View)
(表面)
< In case of doubt >
Temperature: 20 °C ± 2 °C
Humidity: 60 %( RH) to 70 %( RH)
Atmospheric pressure: 86 kPa to 106 kPa
NFA18SL137/187/207/227/357/506,NFA18SD
1.6±0.1
1.6± 0.1
③
④
⑤
③
⑥
① GND
GND ② 0.8±0.1
⑦
⑧
⑨
④
⑤
⑥
GND②
①GND
⑩
Polarity Marking
⑦
⑧
⑨
0.8±0.1
⑩
方向性マーク
Polarity Marking
③④⑤⑥:IN (OUT)
⑦⑧⑨⑩: OUT (IN)
(Side View)
T(mm)
T
0.2±0.1 0.4± 0.05
0.25 ±0.1
NFA18SL307/357/407/487
0.5±0.1
NFA18SL137/187/207/227506, NFA18SD
0.6± 0.05
0.1
(Bottom View)
Electrode
0.15 ±0.1
(in mm)
0.20 0.1
0.20±
MURATA MFG.CO., LTD.
Spec. No. JENF243D-0007P-01
■ Equivalent Circuits
③
NFA18SL307/407/487
Reference Only
④
⑤
⑥
GND①
⑦
⑧
⑨
⑩
③
④
⑤
⑥
GND①
NFA18SD
②GND
⑦
⑧
⑨
③
③
④
④
⑥
⑥
② GND
⑦
⑧
⑨
⑩
③
④
⑤
⑥
②GND
GND①
⑩
⑦
0.004g
⑧
■ Insertion Loss Characteristics (I.L.) (Typ.)
⑨
⑩
(50Ωsystem)
NFA18SL307V1A45
NFA18SL407V1A45
0
0
10
10
20
20
I.L.(dB)
I.L.(dB)
⑤
⑤
GND①
②GND
NFA18SL227
■ Unit Mass (Typ.)
NFA18SL137/187/207/357/506
P 3/ 12
30
30
40
40
50
50
10
100
1000
Frequency(MHz)
10000
10
100
1000
10000
Frequency(MHz)
NFA18SL137V1A45
NFA18SL487V1A45
0
I.L.(dB)
I.L.(dB)
10
20
30
40
50
10
100
1000
10000
Frequency(MHz)
Frequency(MHz)
NFA18SL207V1A45
0
10
10
20
20
I.L(dB)
I.L(dB)
NFA18SL187V1A45
0
30
30
40
40
50
50
60
60
10
100
1000
Frequency(MHz)
10000
10
MURATA MFG.CO., LTD.
100
1000
Frequency(MHz)
10000
Reference Only
Spec. No. JENF243D-0007P-01
P 4/ 12
NFA18SL506X1A45
0
10
I.L(dB)
20
30
40
50
60
10
NFA18SL227V1A45
100
1000
Frequency(MHz)
10000
NFA18SD187X1A45
0
0
10
10
I.L. (dB)
I.L [ dB ]
20
30
20
30
40
40
50
60
50
10
100
1000
10000
Frequency (MHz)
10
100
1000
Frequency [ MHz ]
NFA18SD207X1A45
0
I.L [ dB ]
10
20
30
40
50
10
100
1000
Frequency [ MHz ]
10000
6. Marking
In case of polarity marking on the left side as shown the equivalent circuits(item 5), coil are upside.
Only NFA18SL227/NFA18SD is a double L-type structure, so it is located from the upper side in order of
coil→capacitor→coil→capacitor.
MURATA MFG.CO., LTD.
10000
Spec. No. JENF243D-0007P-01
Reference Only
7. Electrical Performance
No.
Item
Specification
7.1 Insertion Loss
Meet item 3.
(I.L.)
P 5/ 12
Test Method
50
10dB
Specimen
50
10dB
Attenuator
Attenuator
E
50
50
~
SG
Method of measurement based on MIL-STD-220
7.2
7.3
Insulation
Resistance(I.R.)
Withstanding
Voltage
Products shall not be damaged.
8. Mechanical Performance
No.
Item
Specification
8.1 Appearance and Meet item 5.
Dimensions
8.2 Solderability
Electrodes shall be at least 90%
covered with new solder coating.
8.3
Resistance to
soldering heat
Meet Table 1.
Table 1
Appearance
No damaged
Insertion Loss
Insulation Resistance
meet item 3
8.4
Resistance to
soldering heat
(Reflow)
8.5
Drop
Products shall be no failure after
tested.
8.6
Bonding
Strength
The electrodes shall be no failure after
tested.
Insertion Loss = 20 log (E0 / E1)
E0 : Level without FILTER (short)
E1 : Level with FILTER
· Voltage : Rated Voltage
· Time : 1 minutes
· Test Voltage : 30V(DC)
· Time : 1 to 5 s
· Charge Current : 50 mA max.
Test Method
Visual Inspection and measured with Micrometer
caliper and Microscope.
· Flux : Ethanol solution of rosin, 25(wt)%
· Pre-heat : 150°C, 60 s
· Solder : Sn-3.0Ag-0.5Cu
· Solder Temperature : 245 ± 3°C
· Immersion Time :3±1 s
· Immersion and emersion rates : 25mm / s
· Flux : Ethanol solution of rosin, 25(wt)%
· Pre-heat : 150°C, 60 s
· Solder : Sn-3.0Ag-0.5Cu
· Solder Temperature : 270 ± 5°C
· Immersion Time : 10 ± 1 s
· Immersion and emersion rates : 25mm / s
· Pre-heat : 150~180°C, 90±30 s
· Heating: 230 °C min., 60 s max.
· Peak Temperature: 260 °C, 10 s max.
· Solder : Sn-3.0Ag-0.5Cu
· The number of Times : 2 times
It shall be dropped on concrete or steel board.
· Method: Free fall
· Height: 1m
· Attitude from which the product is dropped
: 3 directions
· The Number of Time: 3 times for each direction
(Total 9 times)
It shall be soldered on the glass-epoxy substrate.
· Applying Force (F): 9.8 N
· Applying Time : 30 s
0.2
0.175
0.175
MURATA MFG.CO., LTD.
1.6
(in mm)
Reference Only
Spec. No. JENF243D-0007P-01
No.
Item
Specification
8.7 Vibration
Meet Table 1.
8.8
Bending
Strength
Products shall be no failure after
tested.
P 6/ 12
Test Method
It shall be soldered on the glass-epoxy substrate.
· Oscillation Frequency: 10 to 2000 to 10Hz for
20 minutes.
· Total amplitude 1.5 mm or Acceleration amplitude
196m/s2 whichever is smaller.
· Time: A period of 2 hours in each of 3 mutually
perpendicular directions. (Total 6 hours)
It shall be soldered on the glass-epoxy substrate
(t = 1.0mm).
· Deflection: 2.0 mm
· Keeping Time: 30 s
Pressure jig
R230
F
Deflection
45
45
Product
(in mm)
9. Environment Performance
It shall be soldered on the glass-epoxy substrate.
No.
Item
Specification
9.1 Temperature
Meet Table 1.
Cycling
9.2
Humidity
9.3
Heat Life
9.4
Cold Resistance
Test Method
【NFA18SL307/407/487】
· 1 Cycle
1 step: -55 ± 03 °C / 30 ± 30 minutes
2 step: Room Temperature / within 3 minutes
3 step: +125 ± 30 °C / 30 ± 30 minutes
4 step: Room Temperature / within 3 minutes
· Total of 100 cycles
【NFA18SL137/187/207/227/357/506,NFA18SD】
· 1 Cycle
1 step: -40 ± 03 °C / 30 ± 30 minutes
2 step: Room Temperature / within 3 minutes
3 step: +85 ± 30 °C / 30 ± 30 minutes
4 step: Room Temperature / within 3 minutes
· Total of 100 cycles
· Temperature : 40 ± 2 °C
· Humidity : 90 to 95%(RH)
· Time : 1000± 480 hours
【NFA18SL307/407/487】
· Temperature: 125 ± 2 °C
· Test Voltage: Rated Voltage 200%
· Charge Current: 50 mA max.
· Time: 1000 ± 480 hours
【NFA18SL137/187/207/227/357/506,NFA18SD】
· Temperature: 85 ± 2 °C
· Test Voltage: Rated Voltage 200%
· Charge Current: 50 mA max.
· Time: 1000 ± 480 hours
【NFA18SL307/407/487】
· Temperature: -55 ± 2 °C
· Time: 1000± 480 hours
【NFA18SL137/187/207/227/357/506,NFA18SD】
· Temperature: -40 ± 2 °C
· Time: 1000± 480 hours
MURATA MFG.CO., LTD.
Reference Only
1.80±0.05
3.50±0.05
Embossed Cavity
P 7/ 12
0.25±0.05
8.00±0.20
Sprocket Hole
φ1.55±0.05
1.75±0.10
Spec. No. JENF243D-0007P-01
10. Tape Packaging
10.1. Appearance and Dimensions (8mm-wide plastic tape)
φ0.80±0.10
1.00±0.05
4.00±0.10
2.00±0.05
4.00±0.10
0.70±0.05
Direction of feed
(in:mm)
Dimension of the Cavity is
measured at the bottom side.
10.2. Specification of Taping
(1) Packing quantity (standard quantity)
4000 pcs. / reel
(2) Packing Method
Products shall be packaged in the cavity of the plastic tape and sealed with cover tape.
(3) Sprocket Hole
The sprocket holes are to the right as the tape is pulled toward the user.
(4) Spliced point
The cover tape have no spliced point.
(5) Missing components number
Missing components number within 0.025% of the number per reel or 1 pc., whichever is greater, and are
not continuous. The specified quantity per reel is kept.
10.3. Pull Strength of Plastic Tape and Cover Tape
Plastic tape
Cover tape
10.4. Peeling off force of cover tape
0.2N to 0.7N (minimum value is typical)
Speed of Peeling off : 300 mm / min
5N min.
10N min.
165 to 180 degree
F
Cover tape
Plastic tape
10.5. Dimensions of Leader-tape, Trailer and Reel
There shall be leader-tape (top tape and empty tape) and trailer-tape (empty tape) as follows.
MURATA MFG.CO., LTD.
Reference Only
Spec. No. JENF243D-0007P-01
P 8/ 12
10.6. Marking for reel
Customer part number , MURATA part number , Inspection number(1) , RoHS marking(2) , Quantity , etc
1) « Expression of Inspection No. »
□□
(1)
(1) Factory Code
(2) Date
OOOO
(2)
(3)
First digit
: Year / Last digit of year
Second digit
: Month / Jan. to Sep. 1 to 9, Oct. to Dec. O, N, D
Third, Fourth digit : Day
(3) Serial No.
2) « Expression of RoHS marking »
ROHS – Y (△)
(1) (2)
(1) RoHS regulation conformity parts.
(2) MURATA classification number
10.7. Marking for Outside package (corrugated paper box)
Customer name , Purchasing Order Number , Customer Part Number , MURATA part number ,
RoHS marking (2) , Quantity , etc
10.8. Specification of Outer Case
Label
H
D
W
Outer Case Dimensions
Standard Reel Quantity in Outer Case
(mm)
(Reel)
W
D
H
186
186
93
5
Above Outer Case size is typical. It depends on a quantity of an order.
11. Standard Land Dimensions
The chip EMI filter suppresses noise by conducting the high-frequency noise element to ground.
Therefore, to get enough noise reduction, feed through holes which is connected to ground-plane should be arranged
according to the figure to reinforce the ground-pattern.
1.375
0.225
0.175
0.4
0.05
0.5
1.2
0.175
0.275
< Standard land dimensions for reflow >
Side on which chips are mounted
0.5
0.35
0.5
1.3
2.0
Resist
Filled viaφ0.1
2.35
Copper foil pattern
(in mm)
12. ! Caution
12.1. Limitation of Applications
Please contact us before using our products for the applications listed below which require especially high reliability for
the prevention of defects which might directly cause damage to the third party’s life, body or property.
(1) Aircraft equipment
(2) Aerospace equipment (3) Undersea equipment (4) Power plant control equipment
(5) Medical equipment (6) Transportation equipment(automobiles, trains, ships, etc.) (7) Traffic signal equipment
(8) Disaster prevention / crime prevention equipment (9) Data-processing equipment
(10) Applications of similar complexity or with reliability requirements comparable to the applications listed in the above
12.2. Corrosive gas
Please refrain from use since contact with environments with corrosive gases (sulfur gas [hydrogen sulfide, sulfur
dioxide, etc.], chlorine, ammonia, etc.) or oils (cutting oil, silicone oil, etc.) that have come into contact with the
previously stated corrosive gas environment will result in deterioration of product quality or an open from deterioration
due to corrosion of product electrode, etc. We will not bear any responsibility for use under these environments.
MURATA MFG.CO., LTD.
Reference Only
Spec. No. JENF243D-0007P-01
13. Notice
Products can only be soldered with reflow.
This product is designed for solder mounting.
Please consult us in advance for applying other mounting method such as conductive adhesive.
P 9/ 12
13.1. Mounting direction of a product
In the case of mounting, Polarity Marking should surely serve as the upper surface.
When mounted upside down, since the Polarity Marking is formed with the conductor, it has a possibility that the shortcircuit between terminals may occur.
13.2. Flux and Solder
Flux
Use rosin-based flux, Do not use highly acidic flux (with chlorine content exceeding 0.2(wt)%).
Do not use water soluble flux.
Solder
Use Sn-3.0Ag-0.5Cu solder
Other flux (except above) Please contact us for details, then use.
13.3. Note for Assembling
< Thermal Shock >
Pre-heating should be in such a way that the temperature difference between solder and products surface is limited
to 100°C max. Also cooling into solvent after soldering should be in such a way that the temperature difference is
limited to 100°C max.
13.4. Attention Regarding P.C.B. Bending
The following shall be considered when designing P.C.B.'s and laying out products.
(1) P.C.B. shall be designed so that products are not subject to the mechanical stress for board warpage.
[Products direction]
a
Products shall be located in the sideways direction
(Length:a<b) to the mechanical stress.
b
〈 Poor example 〉
〈 Good example〉
(2)Components location on P.C.B. separation.
It is effective to implement the following measures, to reduce stress in separating the board.
It is best to implement all of the following three measures; however, implement as many measures as possible
to reduce stress.
Contents of Measures
(1) Turn the mounting direction of the component parallel to the board separation surface.
(2) Add slits in the board separation part.
(3) Keep the mounting position of the component away from the board separation surface.
Stress Level
A > D *1
A > B
A > C
*1 A > D is valid when stress is added vertically to the perforation as
with Hand Separation.If a Cutting Disc is used, stress will be
diagonal to the PCB, therefore A > D is invalid.
(3) Mounting Components Near Screw Holes
When a component is mounted near a screw hole, it may be affected by the board deflection that occurs during
the tightening of the screw. Mount the component in a position as far away from the screw holes as possible.
MURATA MFG.CO., LTD.
Reference Only
Spec. No. JENF243D-0007P-01
P 10/ 12
13.5. Pre-heating Temperature
Soldering shall be handled so that the difference between pre-heating temperature and solder temperature shall be
limited to 100°C max. to avoid the heat stress for the products.
13.6. Reflow Soldering
1) Soldering paste printing for reflow
· Standard thickness of solder paste: 100µm to 150µm.
· Use the solder paste printing pattern of the below pattern.
· For the resist and copper foil pattern, use standard land dimensions.
Standard printing pattern of solder paste.
1.375
0.175
0.4
0.225
0.175
1.2
0.5
0.05
0.35
1.3
(in mm)
2.0
2) Soldering Conditions
Standard soldering profile and the limit soldering profile is as follows.
The excessive limit soldering conditions may cause leaching of the electrode and / or resulting in the
deterioration of product quality.
Temp.
(℃)
260℃
245℃±3℃
220℃
230℃
Limit Profile
180
150
Standard Profile
30s~60s
60s max.
90s±30s
Pre-heating
Heating
Peak temperature
Cycle of reflow
Time. (s)
Standard Profile
150~180°C 、90s±30s
above 220°C、30s~60s
245±3°C
2 times
Limit Profile
above 230°C、60s max.
260°C,10s
2 times
13.7. Reworking with Soldering iron
The following conditions shall be strictly followed when using a soldering iron.
Pre-heating : 150°C, 1 min
Soldering iron output : 30W max.
Tip temperature : 350°C max.
Tip diameter : φ3mm max.
Soldering time : 3(+1,-0) s
Times : 2times max.
Note : Do not directly touch the products with the tip of the soldering iron in order to prevent the crack on the ceramic
material due to the thermal shock.
MURATA MFG.CO., LTD.
Reference Only
Spec. No. JENF243D-0007P-01
13.8. Solder Volume
Solder shall be used not to be exceeded as shown below.
P 11/ 12
Upper Limit
Upper Limit
Recommendable
Recommendable
t
1/3T t T(T:Chip thickness)
Accordingly increasing the solder volume, the mechanical stress to product is also increased.
Excessive solder volume may cause the failure of mechanical or electrical performance.
13.9. Cleaning Conditions
Products shall be cleaned on the following conditions.
(1) Cleaning temperature shall be limited to 60°C max. (40°C max. for IPA.)
(2) Ultrasonic cleaning shall comply with the following conditions, with avoiding the resonance phenomenon at the
mounted products and P.C.B.
Power: 20W / l max.
Frequency: 28 kHz to 40 kHz
Time: 5 minutes max.
(3) Cleaner
1. Cleaner
· Isopropyl alcohol (IPA)
2. Aqueous agent
· PINE ALPHA ST-100S
(4) There shall be no residual flux and residual cleaner after cleaning.
In the case of using aqueous agent, products shall be dried completely after rinse with de-ionized water in order to
remove the cleaner.
(5) Other cleaning
Please contact us.
13.10. Operating Environment
Do not use this product under the following environmental conditions, on deterioration of the Insulation Resistance of
the Ferrite material and/or corrosion of Inner Electrode may result from the use.
(1) In the corrodible atmosphere such as acidic gases, alkaline gases, chlorine, sulfur gases, organic gases and etc.
(the sea breeze, Cl2, H2S, NH3, SO2, NO2,etc)
(2) in the atmosphere where liquid such as organic solvent, may splash on the products.
(3) in the atmosphere where the temperature / humidity changes rapidly and it is easy to dew.
13.11. Resin coating
The capacitance and inductance value may change and/or it may affect on the product's performance due to high curestress of resin to be used for coating / molding products. So please pay your careful attention when you select resin.
In prior to use, please make the reliability evaluation with the product mounted in your application set.
13.12. Handling of a substrate
After mounting products on a substrate, do not apply any stress to the product caused by bending or twisting to the
substrate when cropping the substrate, inserting and removing a connector from the substrate or tightening screw to
the substrate.
Excessive mechanical stress may cause cracking in the product.
Bending
Twisting
13.13. Storage condition
(1) Storage period
Use the products within 12 months after delivered.
Solderability should be checked if this period is exceeded.
(2) Storage environment condition
· Products should be stored in the warehouse on the following conditions.
Temperature: -10 to +40°C
Humidity: 15 to 85% relative humidity
No rapid change on temperature and humidity
· Don’t keep products in corrosive gases such as sulfur, chlorine gas or acid, or it may cause oxidization of
electrode, resulting in poor solderability.
· Products should be stored on the palette for the prevention of the influence from humidity, dust and so on.
· Products should be stored in the warehouse without heat shock, vibration, direct sunlight and so on.
· Avoid storing the product by itself bare (i.e.exposed directly to air).
(3) Delivery
Care should be taken when transporting or handling product to avoid excessive vibration or mechanical shock.
MURATA MFG.CO., LTD.
Spec. No. JENF243D-0007P-01
Reference Only
P 12/ 12
14. ! Note
(1) Please make sure that your product has been evaluated in view of your specifications with our product being
mounted to your product.
(2) You are requested not to use our product deviating from the reference specifications.
(3) The contents of this reference specification are subject to change without advance notice. Please approve our
product specifications or transact the approval sheet for product specifications before ordering.
MURATA MFG.CO., LTD.