SAFEA942MFL0F00R15

SAW FILTER FOR GSM900/Band8 Rx Murata part number: SAFEA942MFL0F00 Package Dimensions Specification Specification Item -30 to 85°C Nominal Center Frequency(fc) 25±2°C typ. 942.5MHz 1.35±0.05 (1) Dot Marking(0.3) MZ (3) (0.17) (5) (4) 2-0.25±0.05 (3) (0.075) 5-0.325±0.050 (2) 2.3 dB max. 1.9 dB max. 1.6 dB Absolute Attenuation 0.5max. (2) Insertion Loss (925 to 960 MHz) (4) 1.05±0.05 (5) 1) 0.1 to 860 MHz 50 dB min. 50 dB min. 58 dB 2) 860 to 880 MHz 50 dB min. 50 dB min. 58 dB 3) 880 to 905 MHz 30 dB min. 30 dB min. 49 dB 4) 905 to 915 MHz 25 dB min. 25 dB min. 29 dB 5) 980 to 1030 MHz 25 dB min. 25 dB min. 29 dB 6) 1030 to 1040 MHz 45 dB min. 45 dB min. 50 dB 7) 1040 to 2500 MHz 45 dB min. 45 dB min. 55 dB 8) 2500 to 6000 MHz 35 dB min. 35 dB min. 49 dB Ripple Deviation (925 to 960 MHz) 1.4dB max. 0.9dB max. 0.4 dB VSWR (925 to 960 MHz) 2.0 max. 1.9 max. 1.7 Amplitude Balance (925 to 960 MHz) ±0.5dB max. ±0.5dB max. ±0.2 dB (1) (0.05) 2-0.25±0.05 5-0.25±0.05 2-0.25±0.05 Marking : Laser Printing (1) : Unbalance Port (3)(4) : Balance Port Others : Ground Unit : mm Phase Balance (925 to 960 MHz) Balance Port Matching Impedance (nominal) Unbalance Port Matching Impedance (nominal) Input Signal Level Sep 28, 2009 180±5deg. max. 180±5deg. max. ±1.5 deg. 150W//82nH 50W 31.6mW (+15dBm), 2000 hours 1/4 SAW FILTER FOR GSM900/Band8 Rx Murata part number: SAFEA942MFL0F00 Frequency Performance Amplitude balance Sep 28, 2009 Phase balance 2/4 SAW FILTER FOR GSM900/Band8 Rx 8.0±0.2 MZ MZ MZ +0.1 0.8-0.0 4.0±0.1 0.30±0.05 Direction of Feed 3°max. 1.6±0.1 +0.1 1.5-0.0 2.00±0.05 3°max. 4.0±0.1 3.50±0.05 Dimensions of Carrier Tape 1.75±0.10 Murata part number: SAFEA942MFL0F00 0.70±0.10 Cover Tape 1.3±0.1 Unit: mm Dimensions of Tape Trailer tape Components 178 160...190 80...120 Leader Cavity 400...560 Unit: mm Dimensions of Reel 2.0±0.5 178) 13.5max. (60) 9.0±0.5 13.0±0.5 Unit: mm SAFEA942MFL0F00R14 … 4000pcs/reel SAFEA942MFL0F00R12 … 2000pcs/reel Sep 28, 2009 3/4 SAW FILTER FOR GSM900/Band8 Rx Murata part number: SAFEA942MFL0F00 Recommended Land Pattern 0.25 0.25 0.425 1.3 0.25 0.325 0.525 0.525 0.325 0.325 0.425 0.25 : Land Pattern Unit : mm 1.6 Test Circuit 2 3 1 50Ω 82nH 5 150Ω 4  This PDF Datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.  This PDF Datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep 28, 2009 4/4