SFSCE10M7WF05-R0

o Part Numbering Ceramic Filters (CERAFILr) for IF (Part Number) SF P KA 455K SF E CF 10M7 DF00 q w e r -R0 D4A t S0 -R0 y u qProduct ID wOscillating/Element tProduct Specification Product ID CF Ceramic Filters Oscillating/Element U 4 Elements Area Expansion mode W 6 Elements Area Expansion mode P 4 Elements Area Expansion mode Product Specification Code D4A Three-digit alphanumerics express pass bandwidth, center frequency tolerance and design type. SFE/S/J series are expressed by four-digit alphanumerics. E 2 Elements Thickness Expansion mode SF S 2 Elements Thickness Shear mode eStructure/Size Code Structure/Size Cp/Kp Chip Type Lp Lead Type p is "A" or subsequent code, which indicates the size. It varies depending on vibration mode and number of elements. Chip type is only applied for SF series. rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is hertz (Hz). If the unit is "kHz", it is expressed by three figures plus "K." If the unit is "MHz", a decimal point is expressed by the capital letter "M." yIndividual Specification Code Individual Specification Code 001 Expressed by three-digit alphanumerics. SFE/S/J series are expressed by two-digit alphanumerics. With standard type, y is omitted. uPackaging Code Packaging -B0 Bulk -R0 Embossed Taping ø=180mm -R1 Embossed Taping ø=330mm Embossed taping is applied to chip type.