CERAFILr
(Filters/Traps/Discriminators)
for Audio/Visual Equipment
Cat.No.P50E-6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EU RoHS Compliant
s
s
s
All the products in this catalog comply with EU RoHS.
EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment."
For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CONTENTS
1
CERAFILr and "CERAFIL" in this catalog are
the trademarks of Murata Manufacturing Co., Ltd.
Part Numbering
2
2
1. CERAFILr
3
1-1 CERAFILr 10.7MHz
1 Small Chip Type SFECF Series
5
2 Chip Type SFECV/SFECK Series
11
3 Standard Lead Type SFELF Series
14
4 Low Loss Type SFELF Series
17
5 Low Spurious Response Type SFELF Series
20
6 Wide Bandwidth Type SFELF Series
23
7 Narrow Bandwidth Type SFELF Series
25
8 For FM-IF Tuners SFELF Series
27
Related Data on Lead Type
30
7
9 4.5-6.5MHz Chip Type SFSKA Series
31
8
10 2.3-5.7MHz Chip Type SFSKB Series
34
4
5
6
1-2 CERAFILr 2.3-6.5MHz
1-3 CERAFILr 455kHz
9
11 Chip Type SFPKA Series
38
12 Lead Type SFPLA/CFWLA Series
40
13 For AM Stereo Wide Bandwidth Type SFPLA/CFWLA/CFULA Series
42
SFp Series Temperature Characteristics
44
11
2. Ceramic Trap
14 Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series
10
45
3. Ceramic Discriminator
12
15 10.7MHz Ultra Thin Chip Type CDSCB Series
47
Applied IC Reference Table
52
Notice
53
Packaging
69
Part Number Index
74
13
14
15
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
o Part Numbering
CERAFILr for FM
(Part Number)
SF
E
LF
q
w
e
A
A0
-B0
t y
u
i
10M7 F
r
yCenter Frequency/Tolerance
qProduct ID
Product ID
SF
Ceramic Filters
wOscillation/Number of Elements
Code
Center Frequency
Tolerance
A
Center Frequency mentioned by specification
±30kHz
B
-30kHz shifted from center frequency of code "A"
±30kHz
C
+30kHz shifted from center frequency of code "A"
±30kHz
Code
Oscillation/Number of Elements
D
-60kHz shifted from center frequency of code "A"
±30kHz
E
2 Elements Thickness Expander mode
E
+60kHz shifted from center frequency of code "A"
±30kHz
T
3 Elements Thickness Expander mode
H
Center Frequency mentioned by specification
±25kHz
V
2 Elements Thickness Expander mode
(2nd Harmonic)
V
-50kHz shifted from center frequency of code "H"
±25kHz
W
+50kHz shifted from center frequency of code "H"
±25kHz
K
2 Elements Thickness Expander mode
(3rd Overtone)
K
Center Frequency mentioned by specification
±20kHz
Z
Combination of A, B, C, D, E
—
M
Combination of A, B, C
—
F
Nominal Center Frequency
—
eStructure/Size
Code
Structure/Size
Lp
Lead Type
Cp
Chip Type
p is "A" or subsequent code, which indicates the structure/size.
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Decimal point is expressed by capital letter "M" in case of MHz.
3dB bandwidth of "F" signifies the frequency difference (both + and -)
from reference frequency, which is nominal center frequency.
uSeries
Code
Series
A0
Two-digit alphanumerics express series
iPackaging
Code
t3dB Bandwidth
2
Packaging
-B0
Bulk
Embossed Taping ø180mm
Code
3dB Bandwidth
-R0
C
450kHz min
-R1
Embossed Taping ø330mm
D
350kHz min
-A0
1500pcs. /Radial Taping H0=18mm
E
330kHz
-A1
1000pcs. /Radial Taping H0=18mm
F
280kHz
G
230kHz
H
180kHz
J
150kHz
K
110kHz
L
80kHz
M
50kHz
N
35kHz
Radial taping is applied to lead type and embossed taping to chip type.
With non-standard products, two-digit alphanumerics indicating
"Individual Specification" are added between "uSeries" and
"iPackaging."
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr
(Part Number)
SF
S
KA
4M50
CF
00
-R1
q
w
e
r
t
y
u
qProduct ID
tProduct Specification Code (1)
Product ID
Product Specification Code (1)
Code
SF
Ceramic Filters
wOscillation/Numbers of Element
Code
Oscillation/Numbers of Element
S
2 Elements Thickness Shear mode
BF
Tight Bandwidth Type
CF
Standard Bandwidth Type
DF
Broad Bandwidth Type
EF
Ultra-broad Bandwidth Type
yProduct Specification Code (2)
eStructure/Size
Code
Structure/Size
Kp
Chip Type
p is "A" or subsequent code, which indicates the structure/size.
Code
Product Specification Code (2)
00
Standard Type
uPackaging
Packaging
Code
rNominal Center Frequency
-B0
Bulk
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Decimal point is expressed by capital letter "M" in case of MHz.
-R1
Embossed Taping ø=330mm
With non-standard products, two-digit alphanumerics indicating
"Individual Specification" is added between "yProduct Specification
Code (2)" and "uPackaging."
CERAFILr for AM
(Part Number)
SF
P
KA
455K
D4A
-B0
q
w
e
r
t
y
tProduct Specification
qProduct ID
Product ID
SF
Ceramic Filters
CF
Ceramic Filters
Code
Product Specification
D4A
Three-digit alphanumerics indicate product
specification of 3dB or 6dB frequency tolerance.
ppA indicates standard type.
wOscillation/Numbers of Element
Code
Oscillation/Numbers of Element
P
4 Elements Area Expansion mode
eStructure/Size
yPackaging
Code
Packaging
-B0
Bulk
-R0
Embossed Taping (ø180mm)
Code
Structure/Size
-R1
Embossed Taping (ø330mm)
Lp
Lead Type
-M0
Magazine Cassette
Cp/Kp
Chip Type
p is "A" or subsequent code, which indicates the structure/size. It
varies depending on vibration mode and number of elements.
Radial taping is applied to lead type and embossed taping to chip type.
With non-standard products, three-digit alphanumerics indicating
"Individual Specification" is added between "tProduct Specification"
and "yPackaging."
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Capital letter "K" following three figures expresses the unit of
"kHz."
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Traps
(Part Number)
TP
S
KA
4M00
q
w
e
r
B
00
-R0
t y
u
qProduct ID
tProduct Specification Code (1)
Product ID
TP
Code
Product Specification (1)
B
Broad bandwidth Type
C
Low capacitance Type
Ceramic Traps
wFunction
yProduct Specification Code (2)
Code
Function
S
Single Traps
Code
Product Specification (2)
00
Standard Type
eStructure/Size
Code
Structure/Size
Kp
Chip Type
uPackaging
Packaging
Code
p is "A" or subsequent code, which indicates the structure/size.
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Decimal point is expressed by capital letter "M" in case of MHz.
-B0
Bulk
-R1
Embossed Taping ø=330mm
With non-standard products, three-digit alphanumerics indicating
"Individual Specification" is added between "yProduct Specification
Code (2)" and "uPackaging."
Discriminators for FM
(Part Number)
CD
A
LF
10M7
q
w
e
r
G
A
t y
001 -B0
u
i
yCenter Frequency/Tolerance
qProduct ID
Product ID
CD
Discriminators
wOscillation
Code
Center Frequency
Tolerance
A
Center Frequency mentioned by specification
±30kHz
B
-30kHz shifted from center frequency of code "A"
±30kHz
C
+30kHz shifted from center frequency of code "A"
±30kHz
Code
Oscillation
D
-60kHz shifted from center frequency of code "A"
±30kHz
A
Thickness Expander mode
E
+60kHz shifted from center frequency of code "A"
±30kHz
S
Thickness Shear mode
H
Center Frequency mentioned by specification
±25kHz
V
-50kHz shifted from center frequency of code "H"
±25kHz
W
+50kHz shifted from center frequency of code "H"
±25kHz
eStructure/Size
Code
Structure/Size
K
Center Frequency mentioned by specification
±20kHz
Lp
Lead Type
Z
Combination of A, B, C, D, E
—
Cp
Chip Type
M
Combination of A, B, C
—
F
Nominal Center Frequency
—
p is "A" or subsequent code, which indicates the structure/size.
3dB bandwidth of "F" signifies the frequency difference (both + and -)
from reference frequency, which is nominal center frequency.
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Decimal point is expressed by capital letter "M" in case of MHz.
tSeries
Code
Series
G
Two-digit alphanumerics express series
uIC
Code
IC
001
Applicable IC Control Code
iPackaging
Code
Packaging
-B0
Bulk
-A0
Radial Taping H0=18mm
-R0
Embossed Taping ø=180mm
-R1
Embossed Taping ø=330mm
Radial taping is applied to lead type and embossed taping to chip type.
With non-standard products, an alphanumerics indicating "Individual
Specification" is added between "uIC" and "iPackaging."
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment
1
Small Chip Type SFECF Series
1.3±0.1
SFECF10M7 series for FM receivers are small,
high-performance and super thin (1.4mm max.) filters.
The piezoelectric element is sandwiched by the ceramic
substrate. They have 1.4mm max. thickness and a small
mounting area (3.45x3.1mm). SFECF series and
CDSCB series (MHz Discriminator) enable customers to
make VICS/RKE/TPMS set very thin and small.
3.1±0.2
3.45±0.2
Input electrode
marker
0 to 0.4 (0.6) (0.6) (0.6) 0 to 0.4
(1.28)(1.28)
0.3 min. 0.3 min.
c Features
1. The filters are mountable by automatic placers.
2. They are slim, at only 1.4mm max. thickness, and
have a small mounting area (3.45x3.1mm) enabling
flexible PCB design.
3. Various bandwidths are available. Select a
suitable type in accordance with the desired
selectivity.
4. Operating Temperature Range:
-20 to +80°C (Standard Type)
-40 to +85°C (High-reliability Type)
Storage Temperature Range:
-40 to +85°C (Standard Type)
-55 to +85°C (High-reliability Type)
(1)
(6)
(2) (3)
(5) (4)
(1.28)(1.28)
0 to 0.35
0.75±0.3
0.85±0.3 0.85±0.3
0.65±0.3 0.7±0.3 0.65±0.3
(1): Input
(2)(5): Ground
(3)(4): No connection
(6): Output
: EIAJ Monthly Code
( ): Reference
(in mm)
0 to 0.35
Standard Type
Part Number
Center
Nominal Center
Frequency Frequency (fn)
(fo) (MHz)
(MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Ripple
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFECF10M7HA00-R0
10.700
±30kHz
-
180 ±40kHz
470 max.
4.0±2.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7HF00-R0
-
10.700
fn±25 min.
510 max.
8.0max.
[at fn]
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFECF10M7GA00-R0
10.700
±30kHz
-
230 ±50kHz
510 max.
3.5±2.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7GF00-R0
-
10.700
fn±45 min.
560 max.
8.0max.
[at fn]
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFECF10M7FA00-R0
10.700
±30kHz
-
280 ±50kHz
590 max.
3.0±2.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7FF00-R0
-
10.700
fn±65 min.
620 max.
7.0max.
[at fn]
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFECF10M7EA00-R0
10.700
±30kHz
-
330 ±50kHz
700 max.
3.0±2.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7DA0001-R0
10.700
±30kHz
-
420 min.
950 max.
3.0±2.0dB
3.0 max.
35 min.
25 min.
[within 9MHz to fo] [within fo to 12MHz]
330
-
10.700
fn±150 min.
990 max.
6.0max.
[at fn]
3.0 max.
20 min.
20 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFECF10M7DF00-R0
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Area of Ripple: within 3dB B.W.
Center frequency (fo) defined by the center of 3dB bandwidth.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High-Reliability Type
1
Center Nominal Center
Frequency Frequency (fn)
(fo) (MHz)
(MHz)
Part Number
3dB
Bandwidth
(kHz)
Attenuation Insertion Loss
(kHz)
(dB)
Spurious
Attenuation
(1) (dB)
Ripple
(dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFECF10M7HA00S0-R0
10.700
±30kHz
-
180 ±40kHz
470 max.
4.0±2.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7HF00S0-R0
-
10.700
fn±25 min.
510 max.
8.0max.
[at fn]
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFECF10M7GA00S0-R0
10.700
±30kHz
-
230 ±50kHz
510 max.
3.5±2.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7GF00S0-R0
-
10.700
fn±45 min.
560 max.
8.0max.
[at fn]
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFECF10M7FA00S0-R0
10.700
±30kHz
-
280 ±50kHz
590 max.
3.0±2.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7FF00S0-R0
-
10.700
fn±65 min.
630 max.
7.0max.
[at fn]
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFECF10M7EA00S0-R0
10.700
±30kHz
-
330 ±50kHz
700 max.
3.0±2.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7DF00S0-R0
-
10.700
fn±145 min.
990 max.
6.0max.
[at fn]
3.0 max.
20 min.
20 min.
[within 9MHz to fn] [within fn to 12MHz]
330
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Area of Ripple: within 3dB B.W.
Center frequency (fo) defined by the center of 3dB bandwidth.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
c Standard Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
D
10.64MHz±30kHz
10.650MHz±25kHz
B
10.67MHz±30kHz
10.675MHz±25kHz
A
10.70MHz±30kHz
10.700MHz±25kHz
C
10.73MHz±30kHz
10.725MHz±25kHz
E
10.76MHz±30kHz
10.750MHz±25kHz
Z
Combination A, B, C, D, E
M
Combination A, B, C
c Test Circuit
(5)
(4)
1.05
(6)
0.1
0.3
0.1
c Standard Land Pattern Dimensions
(3)
(4)
(2)
(5)
1.40
0.3
R1
(1)
0.1
0.3
(3)
1.05
(2)
0.1
E1
(1)
(6)
Rg
R2
C2
E2
RF
Voltmeter
S.S.G.
0.1
0.1
0.8
0.6
0.8
0.6
0.8
It indicates solder resist land pattern.
6
(1): Input
(2)(5): Ground
(3)(4): No connection
(6): Output
(in mm)
Rg = 50Ω R1 = 280Ω ±5% R2 = 330Ω ±5%
(1): Input
C2 = 10 ± 2 pF (Including stray capacitance and Input capacitance (2)(5): Ground
of RF voltmeter)
(3)(4): No connection
E1: S.S.G. Output Voltage
(6): Output
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Frequency Characteristics Standard Type
0
7.0
1
6.0
1
6.0
2
5.0
2
5.0
3
4.0
3
4.0
4
3.0
4
3.0
5
2.0
5
2.0
6
1.0
6
1.0
10.700
Frequency (MHz)
10.900
7
0.0
11.100
10.300
10.700
Frequency (MHz)
10.900
0.0
11.100
SFECF10M7EA00-R0
7.0
0
7.0
1
6.0
1
6.0
2
5.0
2
5.0
3
4.0
3
4.0
4
3.0
4
3.0
5
2.0
5
2.0
6
1.0
6
1.0
7
10.300
10.500
10.700
10.900
Attenuation (dB)
0
G.D.T. (μsec.)
Attenuation (dB)
SFECF10M7FA00-R0/SFECF10M7FF00-R0
10.500
7
0.0
11.100
10.300
10.500
Frequency (MHz)
SFECF10M7DA0001-R0
10.700
Frequency (MHz)
10.900
0.0
11.100
SFECF10M7DF00-R0
0
7.0
1
6.0
1
6.0
2
5.0
2
5.0
3
4.0
3
4.0
4
3.0
4
3.0
5
2.0
5
2.0
6
1.0
6
1.0
7
10.500
10.700
Frequency (MHz)
10.900
0.0
11.100
Attenuation (dB)
7.0
G.D.T. (μsec.)
0
10.300
G.D.T. (μsec.)
10.500
7
10.300
10.500
10.700
Frequency (MHz)
10.900
G.D.T. (μsec.)
7
G.D.T. (μsec.)
7.0
Attenuation (dB)
0
10.300
Attenuation (dB)
1
SFECF10M7GA00-R0/SFECF10M7GF00-R0
G.D.T. (μsec.)
Attenuation (dB)
SFECF10M7HA00-R0/SFECF10M7HF00-R0
0.0
11.100
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Frequency Characteristics High-reliability Type
0
7.0
1
6.0
1
6.0
2
5.0
2
5.0
3
4.0
3
4.0
4
3.0
4
3.0
5
2.0
5
2.0
6
1.0
6
1.0
10.500
10.700
Frequency (MHz)
10.900
7
0.0
11.100
10.300
10.900
0.0
11.100
SFECF10M7EA00S0-R0
0
7.0
1
6.0
1
6.0
2
5.0
2
5.0
3
4.0
3
4.0
4
3.0
4
3.0
5
2.0
5
2.0
6
1.0
6
1.0
7
10.500
10.700
10.900
7
0.0
11.100
10.300
Frequency (MHz)
7.0
1
6.0
2
5.0
3
4.0
4
3.0
5
2.0
6
1.0
7
10.300
10.500
10.700
Frequency (MHz)
10.900
0.0
11.100
G.D.T. (μsec.)
SFECF10M7DF00S0-R0
0
Attenuation (dB)
7.0
10.300
8
10.700
Frequency (MHz)
0
G.D.T. (μsec.)
Attenuation (dB)
SFECF10M7FA00S0-R0/SFECF10M7FF00S0-R0
10.500
10.500
10.700
Frequency (MHz)
10.900
0.0
11.100
G.D.T. (μsec.)
7
10.300
Attenuation (dB)
7.0
G.D.T. (μsec.)
SFECF10M7GA00S0-R0/SFECF10M7GF00S0-R0
0
G.D.T. (μsec.)
Attenuation (dB)
SFECF10M7HA00S0-R0/SFECF10M7HF00S0-R0
Attenuation (dB)
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Frequency Characteristics (Spurious) Standard Type
0
0
10
10
20
20
30
40
30
40
50
50
60
60
70
8.700
9.700
10.700
Frequency (MHz)
11.700
70
8.700
12.700
10
10
20
20
30
40
60
60
11.700
11.700
12.700
40
50
10.700
10.700
Frequency (MHz)
30
50
9.700
9.700
SFECF10M7EA00-R0
0
Attenuation (dB)
Attenuation (dB)
SFECF10M7FA00-R0/SFECF10M7FF00-R0
0
70
8.700
1
SFECF10M7GA00-R0/SFECF10M7GF00-R0
Attenuation (dB)
Attenuation (dB)
SFECF10M7HA00-R0/SFECF10M7HF00-R0
12.700
Frequency (MHz)
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
SFECF10M7DA0001-R0/SFECF10M7DF00-R0
0
10
Attenuation (dB)
20
30
40
50
60
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
9
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Frequency Characteristics (Spurious) High-reliability Type
SFECF10M7GA00S0-R0/SFECF10M7GF00S0-R0
0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
SFECF10M7HA00S0-R0/SFECF10M7HF00S0-R0
30
40
30
40
50
50
60
60
70
8.700
9.700
10.700
Frequency (MHz)
11.700
70
8.700
12.700
0
10
10
20
20
30
40
60
60
10.700
11.700
12.700
Frequency (MHz)
SFECF10M7DF00S0-R0
0
10
20
30
40
50
60
70
8.700
10
9.700
10.700
Frequency (MHz)
11.700
12.700
11.700
12.700
40
50
9.700
10.700
Frequency (MHz)
30
50
70
8.700
9.700
SFECF10M7EA00S0-R0
0
Attenuation (dB)
Attenuation (dB)
SFECF10M7FA00S0-R0/SFECF10M7FF00S0-R0
Attenuation (dB)
1
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment
Chip Type SFECV/SFECK Series
2
6.9±0.3
4.05±0.4
SFECV/SFECK10M7 series for FM receivers are monolithic
type ceramic filters that utilize the thickness expander
mode of piezoelectric ceramics. SFECV series enable
customers to make an AM/FM set very thin, and it can be
useful to the total chip circuit.
2.9±0.3
1.2±0.5
1.2±0.5
(2)
(1)
1.5±0.2
1. The piezoelectric element is sandwiched by heat
resistant substrate, thus it has excellent mechanical
strength, and it is suitable for automatic mounting.
2. Various bandwidths are available. Select a suitable
type in accordance with the desired selectivity.
3. Operating Temperature Range:
-20 to +80°C (Standard Type)
-40 to +85°C (High-reliability Type)
Storage Temperature Range:
-40 to +85°C (Standard Type)
-55 to +85°C (High-reliability Type)
1.5±0.2
∗
∗
∗
(3)
c Features
1.2±0.3
: Marking
1.0±0.5
1.0±0.5
1.0±0.5
∗∗ : EIAJ Monthly Code
∗∗ : Center Frequency Rank Code
(1) : Input
(2) : Ground
(3) : Output
(in mm)
c Applications
1. Small, thin radios
2. Automotive radios
3. Headphone stereos
Standard Type
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
Part Number
Center
Frequency
(fo) (MHz)
3dB
Bandwidth
(kHz)
SFECV15M0EQ0001-R0
15.000
±50kHz
300 min.
750 max.
7.0max.
1.0 max.
30 min.
30 min.
[within 14MHz to fo] [within fo to 16MHz]
330
SFECV10M7KA00-R0
10.700
±30kHz
110 ±30kHz
320 max.
6.0±2.0dB
1.0 max.
35 min.
35 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECV10M7JA00-R0
10.700
±30kHz
150 ±40kHz
380 max.
5.5±2.0dB
1.0 max.
35 min.
35 min.
[within 9MHz to fo] [within fo to 12MHz]
330
Attenuation Insertion Loss
(kHz)
(dB)
Ripple
(dB)
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
High-Reliability Type
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
Part Number
Center
Frequency
(fo) (MHz)
3dB
Bandwidth
(kHz)
SFECK10M7KA00S0-R0
10.700
±30kHz
110 ±30kHz
320 max.
6.0±2.0dB
1.0 max.
35 min.
35 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECK10M7JA00S0-R0
10.700
±30kHz
150 ±40kHz
380 max.
5.5±2.0dB
1.0 max.
35 min.
35 min.
[within 9MHz to fo] [within fo to 12MHz]
330
Attenuation Insertion Loss
(kHz)
(dB)
Ripple
(dB)
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
11
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Standard Center Frequency Rank Code
2
CODE
30kHz Step
25kHz Step
D
10.64MHz±30kHz
10.650MHz±25kHz
B
10.67MHz±30kHz
10.675MHz±25kHz
A
10.70MHz±30kHz
10.700MHz±25kHz
C
10.73MHz±30kHz
10.725MHz±25kHz
E
10.76MHz±30kHz
10.750MHz±25kHz
Z
Combination A, B, C, D, E
M
Combination A, B, C
c Standard Land Pattern Dimensions
1.2
1.2
c Test Circuit
1.2
R1
(2)
Rg
4.0
(3)
(1)
E1
R2
C2
E2
S.S.G.
=-10dBm
1.65
1.65
2.85
2.85
Land
Rg = 50Ω R1 = 280Ω ±5% R2 = 330Ω ±5%
C2 = 10 ± 2 pF (Including stray capacitance and Input capacitance
of RF voltmeter)
E1 : S.S.G. Output Voltage
(in mm)
RF
Voltmeter
(1) : Input
(2) : Ground
(3) : Output
c Frequency Characteristics Standard Type
10.0
2
8.0
4
6.0
6
4.0
8
2.0
10
14.700
14.800
14.900
15.000
15.100
Frequency (MHz)
15.200
7.5
2
7.0
3
6.5
4
6.0
5
5.5
6
5.0
7
10.300
12
10.500
10.700
Frequency (MHz)
10.900
4.5
11.100
G.D.T. (μsec.)
Attenuation (dB)
1
1
6.5
2
6.0
3
5.5
4
5.0
5
4.5
6
4.0
10.300
SFECV10M7JA00-R0
8.0
7.0
7
0.0
15.300
0
0
10.500
10.700
Frequency (MHz)
10.900
3.5
11.100
G.D.T. (μsec.)
0
Attenuation (dB)
SFECV10M7KA00-R0
G.D.T. (μsec.)
Attenuation (dB)
SFECV15M0EQ0001-R0
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Frequency Characteristics High-reliability Type
SFECK10M7JA00S0-R0
8.0
1
6.5
1
7.5
2
6.0
2
7.0
3
5.5
3
6.5
4
5.0
4
6.0
5
4.5
5
5.5
6
4.0
6
5.0
7
10.300
10.500
10.700
Frequency (MHz)
10.900
3.5
11.100
7
10.300
10.500
10.700
Frequency (MHz)
10.900
2
G.D.T. (μsec.)
0
Attenuation (dB)
7.0
G.D.T. (μsec.)
Attenuation (dB)
SFECK10M7KA00S0-R0
0
4.5
11.100
c Frequency Characteristics (Spurious) Standard Type
SFECV15M0EQ0001-R0
SFECV10M7KA00-R0
0
0
10
10
20
Attenuation (dB)
Attenuation (dB)
20
30
40
50
30
40
50
60
60
70
80
13.000
14.000
15.000
Frequency (MHz)
16.000
70
8.700
17.000
9.700
10.700
Frequency (MHz)
11.700
12.700
11.700
12.700
SFECV10M7JA00-R0
0
10
Attenuation (dB)
20
30
40
50
60
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
c Frequency Characteristics (Spurious) High-reliability Type
SFECK10M7JA00S0-R0
0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
SFECK10M7KA00S0-R0
30
40
30
40
50
50
60
60
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
70
8.700
9.700
10.700
Frequency (MHz)
13
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment
Standard Lead Type SFELF Series
7.0±2.0
EIAJ
CODE
7.0±2.0
MARKING
5.0±1.0
1.38±0.2
1.7±0.1
0.5±0.1
c Features
3.0±1.0
(3)
(1) : Input
(2) : Ground
(3) : Output
(in mm)
(1)
(2)
7.0±2.0
EIAJ
CODE
7.0±2.0
MARKING
1.38±0.2
1.7±0.1
5.0±1.0
1. These miniature filters have high mechanical
strength.
2. Low loss, favorable waveform symmetry, and high
selectivity
3. Various bandwidths are available for applications
in wide to narrow bands.
4. Small dispersion and stable characteristics
5. Change in center frequency is typically within
±30ppm/°C at -20 to +80°C.
6. High reliability
0.3±0.1
2.5±0.2 2.5±0.2
SFELF10M7HA00-B0
0.5±0.1
3.0±1.0
SFELF10M7GA00-B0
0.3±0.1
2.5±0.2 2.5±0.2
(3)
(1) : Input
(2) : Ground
(3) : Output
(in mm)
(1)
(2)
7.0±2.0
EIAJ
CODE
7.0±2.0
MARKING
5.0±1.0
1.38±0.2
1.7±0.1
0.5±0.1
2.5±0.2 2.5±0.2
3.0±1.0
SFELF10M7FA00-B0
0.3±0.1
3
SFELF10M7 series for FM-receivers are monolithic type
ceramic filters that use the thickness expander mode
of the piezoelectric ceramic.
As part of the environment protection program, the solder
for terminal plating and terminal-element connection
inside of the ceramic filter contain no lead (Pb).
(3)
(2)
(1) : Input
(2) : Ground
(3) : Output
(in mm)
(1)
Center
Frequency
(fo) (MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFELF10M7HA00-B0
10.700
±30kHz
180 ±40kHz
520 max.
7.0max.
40 min.
[within 9MHz to fo]
40 min.
[within fo to 12MHz]
330
SFELF10M7GA00-B0
10.700
±30kHz
230 ±50kHz
570 max.
4.0±2.0dB
40 min.
[within 9MHz to fo]
40 min.
[within fo to 12MHz]
330
SFELF10M7FA00-B0
10.700
±30kHz
280 ±50kHz
650 max.
4.0±2.0dB
30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz]
330
Part Number
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
14
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Standard Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
Color Code
D
10.64MHz±30kHz
10.650MHz±25kHz
Black
B
10.67MHz±30kHz
10.675MHz±25kHz
Blue
A
10.70MHz±30kHz
10.700MHz±25kHz
Red
C
10.73MHz±30kHz
10.725MHz±25kHz
Orange
E
10.76MHz±30kHz
10.750MHz±25kHz
White
Z
Combination A, B, C, D, E
M
Combination A, B, C
3
c Test Circuit
(1)
R1
(2)
(3)
RF
Rg
C
R2
Voltmeter
S.S.G
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
(1) : Input
(2) : Ground
(3) : Output
c Frequency Characteristics
6.5
0
6.0
1
6.0
1
5.5
2
5.5
2
5.0
3
5.0
3
4.5
4
4.5
4
4.0
5
4.0
5
3.5
6
3.5
6
3.0
7
10.500
10.600
10.700
Frequency (MHz)
10.800
Attenuation (dB)
0
7
3.0
10.900
10.500
10.600
10.700
Frequency (MHz)
10.800
G.D.T. (μsec.)
SFELF10M7GA00-B0
G.D.T. (μsec.)
Attenuation (dB)
SFELF10M7HA00-B0
2.5
10.900
5.5
1
5.0
2
4.5
3
4.0
4
3.5
5
3.0
6
2.5
7
10.500
10.600
10.700
Frequency (MHz)
10.800
G.D.T. (μsec.)
Attenuation (dB)
SFELF10M7FA00-B0
0
2.0
10.900
15
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Frequency Characteristics (Spurious)
3
SFELF10M7GA00-B0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
SFELF10M7HA00-B0
0
30
40
50
60
60
9.700
10.700
Frequency (MHz)
11.700
12.700
SFELF10M7FA00-B0
0
10
20
Attenuation (dB)
40
50
70
8.700
30
40
50
60
70
8.700
16
30
9.700
10.700
Frequency (MHz)
11.700
12.700
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment
Low Loss Type SFELF Series
7.0±2.0
SFELF10M7 series for FM receivers are monolithic type
ceramic filters that use the thickness expander mode
of the piezoelectric ceramic.
As part of the environment protection program, the solder
for terminal plating and terminal-element connection
inside of the ceramic filter contain no lead (Pb).
EIAJ
CODE
7.0±2.0
MARKING
1.38±0.2
1.7±0.1
c Features
4
5.0±1.0
0.5±0.1
3.0±1.0
1. Insertion loss is 1 to 1.5dB lower than
conventional products. These types are useful for
elevating the sensitivity of sets.
2. Small dispersion and stable characteristics
3. Excellent shape factor of frequency response
4. Good waveform symmetry
0.3±0.1
2.5±0.2 2.5±0.2
SFELF10M7JAA0-B0
(3)
(1) : Input
(2) : Ground
(3) : Output
(in mm)
(1)
(2)
7.0±2.0
EIAJ
CODE
7.0±2.0
MARKING
5.0±1.0
1.38±0.2
1.7±0.1
0.5±0.1
3.0±1.0
(3)
MARKING
MARKING
7.0±2.0
7.0±2.0
EIAJ
CODE
0.5±0.1
(3)
(2)
(1) : Input
(2) : Ground
(3) : Output
SFELF10M7FAA0-B0
0.3±0.1
2.5±0.2 2.5±0.2
3.0±1.0
0.3±0.1
2.5±0.2 2.5±0.2
SFELF10M7GAA0-B0
3.0±1.0
0.5±0.1
5.0±1.0
1.38±0.2
1.7±0.1
5.0±1.0
1.38±0.2
1.7±0.1
(in mm)
(1)
(2)
7.0±2.0
EIAJ
CODE
(1) : Input
(2) : Ground
(3) : Output
7.0±2.0
SFELF10M7HAA0-B0
0.3±0.1
2.5±0.2 2.5±0.2
(in mm)
(1)
(3)
(2)
(1) : Input
(2) : Ground
(3) : Output
(in mm)
(1)
Center
Frequency
(fo) (MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFELF10M7JAA0-B0
10.700
±30kHz
150 ±40kHz
360 max.
4.5±2.0dB
35 min.
[within 9MHz to fo]
35 min.
[within fo to 12MHz]
330
SFELF10M7HAA0-B0
10.700
±30kHz
180 ±40kHz
470 max.
3.5±1.5dB
35 min.
[within 9MHz to fo]
35 min.
[within fo to 12MHz]
330
SFELF10M7GAA0-B0
10.700
±30kHz
230 ±50kHz
520 max.
3.0±2.0dB
35 min.
[within 9MHz to fo]
35 min.
[within fo to 12MHz]
330
SFELF10M7FAA0-B0
10.700
±30kHz
280 ±50kHz
590 max.
2.5±2.0dB
30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz]
330
Part Number
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Standard Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
Color Code
D
10.64MHz±30kHz
10.650MHz±25kHz
Black
B
10.67MHz±30kHz
10.675MHz±25kHz
Blue
A
10.70MHz±30kHz
10.700MHz±25kHz
Red
C
10.73MHz±30kHz
10.725MHz±25kHz
Orange
E
10.76MHz±30kHz
10.750MHz±25kHz
White
Z
Combination A, B, C, D, E
M
Combination A, B, C
c Test Circuit
4
(1)
R1
(2)
(3)
RF
Rg
C
R2
Voltmeter
S.S.G
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
(1) : Input
(2) : Ground
(3) : Output
c Frequency Characteristics
7.0
0
6.5
1
6.5
1
6.0
2
6.0
2
5.5
3
5.5
3
5.0
4
5.0
4
4.5
5
4.5
5
4.0
6
4.0
6
3.5
10.600
10.700
Frequency (MHz)
10.800
7
3.5
10.900
10.500
10.800
3.0
10.900
SFELF10M7FAA0-B0
0
5.5
1
5.5
1
5.0
2
5.0
2
4.5
3
4.5
3
4.0
4
4.0
4
3.5
5
3.5
5
3.0
6
3.0
6
2.5
7
10.600
10.700
Frequency (MHz)
10.800
2.5
10.900
Attenuation (dB)
6.0
10.500
18
10.700
Frequency (MHz)
0
G.D.T. (μsec.)
Attenuation (dB)
SFELF10M7GAA0-B0
10.600
7
10.500
10.600
10.700
Frequency (MHz)
10.800
2.0
10.900
G.D.T. (μsec.)
7
10.500
Attenuation (dB)
0
G.D.T. (μsec.)
SFELF10M7HAA0-B0
G.D.T. (μsec.)
Attenuation (dB)
SFELF10M7JAA0-B0
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Frequency Characteristics (Spurious)
SFELF10M7HAA0-B0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
SFELF10M7JAA0-B0
0
30
40
30
40
50
50
60
60
70
8.700
9.700
10.700
Frequency (MHz)
11.700
70
8.700
12.700
0
10
10
20
20
30
40
60
60
10.700
Frequency (MHz)
11.700
4
12.700
40
50
9.700
11.700
30
50
70
8.700
10.700
Frequency (MHz)
SFELF10M7FAA0-B0
0
Attenuation (dB)
Attenuation (dB)
SFELF10M7GAA0-B0
9.700
12.700
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
19
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment
Low Spurious Response Type SFELF Series
7.5±2.0
SFELF10M7 series for FM-receivers are monolithic type
ceramic filters that use the thickness expander mode
of the piezoelectric ceramic.
As part of the environment protection program, the solder
for terminal plating and terminal-element connection
inside of the ceramic filter contain no lead (Pb).
EIAJ
CODE
5.0±1.0
1.38±0.2
1.7±0.1
0.5±0.1
3.0±1.0
(3)
7.5±2.0
MARKING
MARKING
7.0±2.0
7.5±2.0
EIAJ
CODE
EIAJ
CODE
(1)
(2)
3.0±1.0
SFELF10M7HAB0-B0
0.3±0.1
2.5±0.2 2.5±0.2
3.0±1.0
0.3±0.1
2.5±0.2 2.5±0.2
(3)
(in mm)
(1)
(2)
7.5±2.0
7.5±2.0
MARKING
MARKING
EIAJ
CODE
7.0±2.0
(3)
5.0±1.0
0.5±0.1
EIAJ
CODE
0.5±0.1
SFELF10M7FAB0-B0
(3)
(2)
(1)
0.3±0.1
2.5±0.2 2.5±0.2
3.0±1.0
0.3±0.1
2.5±0.2 2.5±0.2
3.0±1.0
0.5±0.1
5.0±1.0
1.38±0.2
1.7±0.1
5.0±1.0
1.38±0.2
1.7±0.1
(in mm)
7.0±2.0
0.5±0.1
SFELF10M7GAB0-B0
(in mm)
1.38±0.2
1.7±0.1
5.0±1.0
1.38±0.2
1.7±0.1
SFELF10M7JAB0-B0
(1)
(2)
7.0±2.0
SFELF10M7KAB0-B0
These types have lower spurious response compared
to standard filters.
0.3±0.1
2.5±0.2 2.5±0.2
c Features
5
7.0±2.0
MARKING
(3)
(in mm)
(2)
(1)
(in mm)
Center
Frequency
(fo) (MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFELF10M7KAB0-B0
10.700
±30kHz
110 ±30kHz
350 max.
7.0±2.0dB
45/30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz]
330
SFELF10M7JAB0-B0
10.700
±30kHz
150 ±40kHz
380 max.
5.5±2.0dB
45 min.
[within 9MHz to fo]
45 min.
[within fo to 12MHz]
330
SFELF10M7HAB0-B0
10.700
±30kHz
180 ±40kHz
520 max.
5.0±2.0dB
45 min.
[within 9MHz to fo]
45 min.
[within fo to 12MHz]
330
SFELF10M7GAB0-B0
10.700
±30kHz
230 ±50kHz
570 max.
3.0±2.0dB
45 min.
[within 9MHz to fo]
45 min.
[within fo to 12MHz]
330
Part Number
Continued on the following page.
20
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Part Number
Center
Frequency
(fo) (MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
10.700
±30kHz
280 ±50kHz
650 max.
3.0±2.0dB
45 min.
[within 9MHz to fo]
45 min.
[within fo to 12MHz]
330
SFELF10M7FAB0-B0
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
c Standard Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
Color Code
D
10.64MHz±30kHz
10.650MHz±25kHz
Black
B
10.67MHz±30kHz
10.675MHz±25kHz
Blue
A
10.70MHz±30kHz
10.700MHz±25kHz
Red
C
10.73MHz±30kHz
10.725MHz±25kHz
Orange
E
10.76MHz±30kHz
10.750MHz±25kHz
White
Z
Combination A, B, C, D, E
M
Combination A, B, C
5
c Test Circuit
(1)
R1
(2)
(3)
RF
Rg
C
R2
Voltmeter
S.S.G
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
(1) : Input
(2) : Ground
(3) : Output
c Frequency Characteristics
7.0
1
7.5
1
6.5
2
7.0
2
6.0
3
6.5
3
5.5
4
6.0
4
5.0
5
5.5
5
4.5
6
5.0
6
4.0
10.600
10.700
Frequency (MHz)
10.800
4.5
10.900
7
10.500
10.700
Frequency (MHz)
10.800
3.5
10.900
SFELF10M7GAB0-B0
6.5
0
6.0
1
6.0
1
5.5
2
5.5
2
5.0
3
5.0
3
4.5
4
4.5
4
4.0
5
4.0
5
3.5
6
3.5
6
3.0
7
10.500
10.600
10.700
Frequency (MHz)
10.800
3.0
10.900
Attenuation (dB)
0
G.D.T. (μsec.)
Attenuation (dB)
SFELF10M7HAB0-B0
10.600
7
10.500
10.600
10.700
Frequency (MHz)
10.800
G.D.T. (μsec.)
7
10.500
Attenuation (dB)
0
G.D.T. (μsec.)
SFELF10M7JAB0-B0
8.0
G.D.T. (μsec.)
Attenuation (dB)
SFELF10M7KAB0-B0
0
2.5
10.900
Continued on the following page.
21
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
c Frequency Characteristics
5.5
1
5.0
2
4.5
3
4.0
4
3.5
5
3.0
6
2.5
7
10.500
10.700
Frequency (MHz)
10.800
2.0
10.900
c Frequency Characteristics (Spurious)
SFELF10M7JAB0-B0
0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
SFELF10M7KAB0-B0
30
40
30
40
50
50
60
60
70
8.700
9.700
10.700
Frequency (MHz)
11.700
70
12.700
0
0
10
10
20
20
30
40
60
60
10.700
Frequency (MHz)
11.700
12.700
SFELF10M7FAB0-B0
0
10
20
30
40
50
60
70
8.700
22
9.700
10.700
Frequency (MHz)
11.700
10.700
Frequency (MHz)
11.700
12.700
40
50
9.700
9.700
30
50
70
8.700
8.700
SFELF10M7GAB0-B0
Attenuation (dB)
Attenuation (dB)
SFELF10M7HAB0-B0
Attenuation (dB)
5
10.600
G.D.T. (μsec.)
Attenuation (dB)
SFELF10M7FAB0-B0
0
12.700
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment
Wide Bandwidth Type SFELF Series
7.0±2.0
SFELF10M7 series for FM-receivers are monolithic type
ceramic filters that use the thickness expander mode
of the piezoelectric ceramic.
As part of the environment protection program, the solder
for terminal plating and terminal-element connection
inside of the ceramic filter contain no lead (Pb).
EIAJ
CODE
7.0±2.0
MARKING
5.0±1.0
1.38±0.2
1.7±0.1
0.5±0.1
c Features
3.0±1.0
Realizes wider band characteristics not obtained by
conventional ceramic filters.
0.3±0.1
2.5±0.2 2.5±0.2
SFELF10M7EA00-B0
(3)
(1) : Input
(2) : Ground
(3) : Output
(in mm)
(1)
(2)
7.0±2.0
6
EIAJ
CODE
7.0±2.0
MARKING
5.0±1.0
1.38±0.2
1.7±0.1
0.5±0.1
3.0±1.0
SFELF10M7DF00-B0
0.3±0.1
2.5±0.2 2.5±0.2
(3)
Center Nominal Center
3dB
Attenuation Insertion Loss
Frequency Frequency (fn) Bandwidth
(kHz)
(dB)
(fo) (MHz)
(MHz)
(kHz)
Part Number
Spurious
Attenuation
(1) (dB)
(2)
(1) : Input
(2) : Ground
(3) : Output
(in mm)
(1)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFELF10M7EA00-B0
10.700
±30kHz
-
330 ±50kHz
680 max.
4.0±2.0dB
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFELF10M7DF00-B0
-
10.700
fn±175 min.
950 max.
3.0±2.0dB
20 min.
20 min.
[within 5MHz to fn] [within fn to 15MHz]
470
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
c Standard Center Frequency Rank Code (SFELF10M7EA00-B0)
CODE
30kHz Step
25kHz Step
Color Code
D
10.64MHz±30kHz
10.650MHz±25kHz
Black
B
10.67MHz±30kHz
10.675MHz±25kHz
Blue
A
10.70MHz±30kHz
10.700MHz±25kHz
Red
C
10.73MHz±30kHz
10.725MHz±25kHz
Orange
E
10.76MHz±30kHz
10.750MHz±25kHz
White
Z
Combination A, B, C, D, E
M
Combination A, B, C
23
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Test Circuit
(1)
R1
(2)
(3)
RF
Rg
C
R2
Voltmeter
S.S.G
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
(1) : Input
(2) : Ground
(3) : Output
c Frequency Characteristics
4.5
1
4.0
1
4.0
2
3.5
2
3.5
3
3.0
3
3.0
4
2.5
4
2.5
5
2.0
5
2.0
6
1.5
6
1.5
7
10.300
10.500
10.700
Frequency (MHz)
10.900
Attenuation (dB)
0
G.D.T. (μsec.)
Attenuation (dB)
6
SFELF10M7DF00-B0
4.5
7
1.0
11.100
10.300
10.500
10.700
Frequency (MHz)
10.900
1.0
11.100
c Frequency Characteristics (Spurious)
0
0
10
10
20
20
30
40
30
40
50
50
60
60
70
8.700
24
SFELF10M7DF00-B0
Attenuation (dB)
Attenuation (dB)
SFELF10M7EA00-B0
9.700
10.700
Frequency (MHz)
11.700
12.700
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
G.D.T. (μsec.)
SFELF10M7EA00-B0
0
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment
Narrow Bandwidth Type SFELF Series
7.0±2.0
c Features
EIAJ
CODE
7.0±2.0
MARKING
SFELF10M7LFTA/KAH0 series realizes narrower band
characteristics not obtained by conventional ceramic
filters. Besides, low spurious and temperature
characteristics are stable. This series is suitable for
European car-audio or AM upconversion use that
needs stable narrow band characteristics.
As part of the environment protection program, the solder
for terminal plating and terminal-element connection
inside of the ceramic filter contain no lead (Pb).
5.0±1.0
1.38±0.2
1.7±0.1
0.5±0.1
3.0±1.0
0.3±0.1
2.5±0.2 2.5±0.2
SFELF10M7LFTA-B0
(3)
(1) : Input
(2) : Ground
(3) : Output
(in mm)
(1)
(2)
7.0±2.0
EIAJ
CODE
7.0±2.0
MARKING
7
5.0±1.0
1.38±0.2
1.7±0.1
0.5±0.1
3.0±1.0
SFELF10M7KAH0-B0
0.3±0.1
2.5±0.2 2.5±0.2
(3)
Center Nominal Center
3dB
Attenuation Insertion Loss
Frequency Frequency (fn) Bandwidth
(kHz)
(dB)
(fo) (MHz)
(MHz)
(kHz)
Part Number
Spurious
Attenuation
(1) (dB)
(2)
(1) : Input
(2) : Ground
(3) : Output
(in mm)
(1)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFELF10M7LFTA-B0
-
10.700
fn±25 min.
280 max.
7.0±2.0dB
30 min.
30 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFELF10M7KAH0-B0
10.700
±30kHz
-
110 ±30kHz
350 max.
7.0±2.0dB
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
c Standard Center Frequency Rank Code (SFELF10M7KAH0-B0)
CODE
30kHz Step
25kHz Step
Color Code
D
10.64MHz±30kHz
10.650MHz±25kHz
Black
B
10.67MHz±30kHz
10.675MHz±25kHz
Blue
A
10.70MHz±30kHz
10.700MHz±25kHz
Red
C
10.73MHz±30kHz
10.725MHz±25kHz
Orange
E
10.76MHz±30kHz
10.750MHz±25kHz
White
Z
Combination A, B, C, D, E
M
Combination A, B, C
25
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Test Circuit
(1)
R1
(2)
(3)
RF
Rg
Voltmeter
C
R2
S.S.G
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
(1) : Input
(2) : Ground
(3) : Output
c Frequency Characteristics
7
8.0
1
11.0
1
7.5
2
10.0
2
7.0
3
9.0
3
6.5
4
8.0
4
6.0
5
7.0
5
5.5
6
6.0
6
5.0
7
10.600
10.650
10.700
Frequency (MHz)
10.750
5.0
10.800
Attenuation (dB)
0
7
10.600
10.650
10.700
Frequency (MHz)
10.750
4.5
10.800
c Frequency Characteristics (Spurious)
0
0
10
10
20
20
30
40
30
40
50
50
60
60
70
8.700
26
SFELF10M7KAH0-B0
Attenuation (dB)
Attenuation (dB)
SFELF10M7LFTA-B0
9.700
10.700
Frequency (MHz)
11.700
12.700
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
G.D.T. (μsec.)
SFELF10M7KAH0-B0
12.0
G.D.T. (μsec.)
Attenuation (dB)
SFELF10M7LFTA-B0
0
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment
For FM-IF Tuners SFELF Series
7.0±2.0
SFELF10M7 series for FM-receivers are monolithic type
ceramic filters that use the thickness expander mode
of the piezoelectric ceramic.
As part of the environment protection program, the solder
for terminal plating and terminal-element connection
inside of the ceramic filter contain no lead (Pb).
EIAJ
CODE
7.0±2.0
MARKING
5.0±1.0
1.38±0.2
1.7±0.1
0.5±0.1
c Features
3.0±1.0
1. Little dispersion of amplitude characteristics and
phase characteristics (G. D. T. characteristics)
2. The SFELF_G series is based on SFELF_FA00/GA00/
HA00, and it obtains high selectivity with low loss.
There is little dispersion of amplitude and GDT
characteristics, and low distortion rate can be
obtained.
3. The flatness of GDT is inspected for all products.
0.3±0.1
2.5±0.2 2.5±0.2
SFELF10M7HA0G-B0
(3)
(1) : Input
(2) : Ground
(3) : Output
(in mm)
(1)
(2)
7.0±2.0
EIAJ
CODE
7.0±2.0
MARKING
5.0±1.0
1.38±0.2
1.7±0.1
0.5±0.1
3.0±1.0
SFELF10M7GA0G-B0
0.3±0.1
2.5±0.2 2.5±0.2
(3)
(1) : Input
(2) : Ground
(3) : Output
(in mm)
(1)
(2)
7.0±2.0
EIAJ
CODE
7.0±2.0
MARKING
5.0±1.0
1.38±0.2
1.7±0.1
0.5±0.1
3.0±1.0
0.3±0.1
2.5±0.2 2.5±0.2
SFELF10M7FA0G-B0
(3)
Part Number
Center
3dB
Attenuation Insertion Loss
Frequency Bandwidth
(kHz)
(dB)
(fo) (MHz)
(kHz)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
(2)
(1) : Input
(2) : Ground
(3) : Output
(in mm)
(1)
GDT Bandwidth Input/Output
Impedance
(kHz)
(ohm)
SFELF10M7HA0G-B0
10.700
±30kHz
180 ±40kHz
520 max.
7.0max.
40 min.
40 min.
[within 9MHz to fo] [within fo to 12MHz]
fo±45min.
330
SFELF10M7GA0G-B0
10.700
±30kHz
230 ±50kHz
600 max.
7.0max.
40 min.
40 min.
[within 9MHz to fo] [within fo to 12MHz]
fo±60min.
330
SFELF10M7FA0G-B0
10.700
±30kHz
280 ±50kHz
650 max.
4.0±2.0dB
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
fo±85min.
330
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
27
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Standard Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
Color Code
D
10.64MHz±30kHz
10.650MHz±25kHz
Black
B
10.67MHz±30kHz
10.675MHz±25kHz
Blue
A
10.70MHz±30kHz
10.700MHz±25kHz
Red
C
10.73MHz±30kHz
10.725MHz±25kHz
Orange
E
10.76MHz±30kHz
10.750MHz±25kHz
White
Z
Combination A, B, C, D, E
M
Combination A, B, C
c Test Circuit
R1
(1)
(2)
(3)
RF
Rg
R2
C
Voltmeter
S.S.G
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
(1) : Input
(2) : Ground
(3) : Output
c Frequency Characteristics
6.5
0
6.0
1
6.0
1
5.5
2
5.5
2
5.0
3
5.0
3
4.5
4
4.5
4
4.0
5
4.0
5
3.5
6
3.5
6
3.0
7
10.400
10.500
10.600
10.700
10.800
Frequency (MHz)
10.900
7
3.0
11.000
10.400
5.5
1
5.0
2
4.5
3
4.0
4
3.5
5
3.0
6
2.5
7
10.400
28
10.500
10.600
10.700
10.800
Frequency (MHz)
10.900
2.0
11.000
G.D.T. (μsec.)
Attenuation (dB)
SFELF10M7FA0G-B0
0
Attenuation (dB)
0
G.D.T. (μsec.)
Attenuation (dB)
8
SFELF10M7GA0G-B0
10.500
10.600
10.700
10.800
Frequency (MHz)
10.900
2.5
11.000
G.D.T. (μsec.)
SFELF10M7HA0G-B0
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Frequency Characteristics (Spurious)
SFELF10M7GA0G-B0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
SFELF10M7HA0G-B0
0
30
40
30
40
50
50
60
60
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
SFELF10M7FA0G-B0
0
10
Attenuation (dB)
20
30
40
50
60
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
8
29
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr 10.7MHz Related Data on Lead Type
c Temperature Characteristics
0
–20
+2
+1
–20
0
+20
+40
Temperature (°C)
+60
+80
Insertion loss
Variation (dB)
–40
0
–1
–2
Variation (kHz)
Variation (kHz)
+20
SFELF10M7HA00-B0
Center frequency
+40
+20
–20
0
+20
+40
Temperature (°C)
+60
3dB Bandwidth
0
–20
–40
–20
0
+20
+40
Temperature (°C)
+60
+40
+20
+80
Center frequency
0
–20
–40
+2
+1
–20
0
+20
+40
Temperature (°C)
+60
+80
0
+20
+40
Temperature (°C)
+60
+80
0
+20
+40
Temperature (°C)
+60
+80
Insertion loss
0
–1
–2
+80
Variation (kHz)
Variation (dB)
Variation (kHz)
SFELF10M7GA00-B0
+40
+40
+20
–20
3dB Bandwidth
0
–20
–40
–20
c Matching Conditions
1. When using ceramic filters, it is most important to
match the input/output load to impedance 330 ohm
(SFELF10M7DF00-B0 is 470 ohm).
Waveform symmetry is damaged when reactance is
added to the input/output load.
2. Two ceramic filters directly connected can be used
for high selectivity. For reducing waveform
variation, it is recommended to input a buffer AMP
between ceramic filters.
3. The SFELF10M7 series are of input/output symmetric
structure so that in theory there is no input/output
directionality. Actual circuits may use different
input/output loading conditions (for example,
mismatched impedance) or capacitance load. In such
cases, the waveform will be a little changed by the
direction of the input/output of the ceramic filters.
c Loaded Resistance and Waveform (Rg+R1=330 ohm)
Attenuation (dB)
R2=560Ω
0
1
2
3
4
5
6
7
1.2
1.0
0.8
0.6
0.4
0.2
0
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
1.2
1.0
0.8
0.6
0.4
0.2
0
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
R2=1kΩ
0
1
2
3
4
5
6
7
1.2
1.0
0.8
0.6
0.4
0.2
0
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
Group Delay Time (μsec.)
Attenuation (dB)
0
1
2
3
4
5
6
7
Group Delay Time (μsec.)
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
R2=330Ω
Attenuation (dB)
1.2
1.0
0.8
0.6
0.4
0.2
0
Group Delay Time (μsec.)
Attenuation (dB)
0
1
2
3
4
5
6
7
Group Delay Time (μsec.)
SFELF10M7GA00-B0
R2=220Ω
c Loaded Capacitance and Waveform (Rg+R1=R2=330 ohm)
Attenuation (dB)
C=56pF
30
0
1
2
3
4
5
6
7
1.2
1.0
0.8
0.6
0.4
0.2
0
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
1.2
1.0
0.8
0.6
0.4
0.2
0
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
C=82pF
0
1
2
3
4
5
6
7
1.2
1.0
0.8
0.6
0.4
0.2
0
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
Group Delay Time (μsec.)
Attenuation (dB)
0
1
2
3
4
5
6
7
Group Delay Time (μsec.)
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
C=33pF
Attenuation (dB)
1.2
1.0
0.8
0.6
0.4
0.2
0
Group Delay Time (μsec.)
Attenuation (dB)
0
1
2
3
4
5
6
7
Group Delay Time (μsec.)
SFELF10M7HA00-B0
C=10pF
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (CERAFILr 2.3-6.5MHz) for Audio/Visual Equipment
4.5-6.5MHz Chip Type SFSKA Series
SMD ceramic filter SFSKA_CF is a small and thin SMD
filter sealed with a metal cap.
Recommended for LCD-TVs, and small and thin tuners.
7.9±0.2
3.0±0.1
1.8±0.2
c Features
0.5±0.1
8.5±0.2
1. High attenuation outside bandwidth
2. Small and thin package
3. Reflow-solderable
0.6±0.2
3.8±0.2
1.0±0.1
1.3±0.2
0.3±0.1
1.3±0.2
(1)
(2)
(3)
(1) : Input
(2) : Ground
(3) : Output
(in mm)
2.5±0.2 2.5±0.2
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
20dB
Bandwidth
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation(1)
(dB)
Spurious
Attenuation(2)
(dB)
Input/Output
Impedance
(ohm)
SFSKA4M50CF00-R3
4.500
fn±60 min.
600 max.
6.0 max.
20 min.
[within 0 to fn]
15 min.
[within fn to 7.0MHz]
1000
SFSKA5M50CF00-R3
5.500
fn±60 min.
600 max.
6.0 max.
25 min.
[within 0 to fn]
15 min.
[within fn to 7.0MHz]
600
SFSKA6M00CF00-R3
6.000
fn±60 min.
600 max.
6.0 max.
25 min.
[within 0 to fn]
15 min.
[within fn to 7.5MHz]
470
SFSKA6M50CF00-R3
6.500
fn±60 min.
600 max.
6.0 max.
25 min.
[within 0 to fn]
15 min.
[within fn to 8.5MHz]
470
Part Number
Area of Insertion Loss: at minimum loss point
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
c Standard Land Pattern Dimensions
9
c Test Circuit
SFSKA4M50CF00-R3
1.0
1.5
(1) (2) (3)
1.0
1.5
R1
Rg
4.8
1.0
E1
R2
C2
E2
RF
Voltmeter
S.S.G.
(in mm)
R1+Rg=R2=1000Ω ±5%, Rg=50Ω
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1:S.S.G. Output voltage
(1) : Input
(2) : Ground
(3) : Output
Continued on the following page.
31
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
c Test Circuit
SFSKA5M50CF00-R3
SFSKA6M00CF00-R3
(1) (2) (3)
(1) (2) (3)
R1
R1
Rg
Rg
E1
R2
C2
RF
Voltmeter
E2
S.S.G.
E1
R2
C2
RF
Voltmeter
E2
S.S.G.
R1+Rg=R2=600Ω ±5%, Rg=50Ω
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1: S.S.G. Output voltage
(1) : Input
(2) : Ground
(3) : Output
R1+Rg=R2=470Ω ±5%, Rg=50Ω
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1: S.S.G. Output voltage
(1) : Input
(2) : Ground
(3) : Output
SFSKA6M50CF00-R3
(1) (2) (3)
R1
Rg
E1
R2
C2
RF
Voltmeter
E2
S.S.G.
R1+Rg=R2=470Ω ±5%, Rg=50Ω
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1: S.S.G. Output voltage
(1) : Input
(2) : Ground
(3) : Output
c Frequency Characteristics
SFSKA4M50CF00-R3
SFSKA5M50CF00-R3
0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
9
30
40
50
60
30
40
50
60
70
70
3.5
3.7
3.9
4.1
4.3
4.5
4.7
4.9
5.1
5.3
4.5
5.5
4.7
4.9
5.1
5.5
5.7
5.9
6.1
6.3
6.5
6.9
7.1
7.3
7.5
SFSKA6M50CF00-R3
0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
SFSKA6M00CF00-R3
30
40
50
60
30
40
50
60
70
70
5.0
5.2
5.4
5.6
5.8
6.0
6.2
Frequency (MHz)
32
5.3
Frequency (MHz)
Frequency (MHz)
6.4
6.6
6.8
7.0
5.5
5.7
5.9
6.1
6.3
6.5
6.7
Frequency (MHz)
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Frequency Characteristics (Spurious)
SFSKA5M50CF00-R3
0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
SFSKA4M50CF00-R3
30
40
50
40
50
60
60
70
30
70
0.0
2.0
4.0
6.0
8.0
10.0
0
2.0
SFSKA6M00CF00-R3
6.0
8.0
10.0
8.0
10.0
SFSKA6M50CF00-R3
0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
4.0
Frequency (MHz)
Frequency (MHz)
30
40
50
60
30
40
50
60
70
70
0
2.0
4.0
6.0
Frequency (MHz)
8.0
10.0
0
2.0
4.0
6.0
Frequency (MHz)
9
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (CERAFILr 2.3-6.5MHz) for Audio/Visual Equipment
2.3-5.7MHz Chip Type SFSKB Series
5.2±0.1
(4)
(1)
3.8±0.1
∗
(3.5)
The SFSKB series are SMD ceramic filters suitable
for IR headphone applications.
Center frequencies of 2.3, 2.8, 3.2, 3.8, 4.3, 4.8, 5.2,
5.7MHz are available.
Realized small, thin and lightweight package,
compared with conventional LC filters.
It helps to compose multi-channel circuit on one PCB.
No frequency adjustment is required on PCB and it
contributes to the reduction of production cost.
(2)
(3)
1.35±0.15
(4.93)
4-0.35
c Features
(4) (1)
0.25±0.1
(0.1) 1.0±0.1 (1.6)
(3) (2)
0.3±0.1
4-0.35
(0.1) 1.5±0.1 (2.0)
Terminal Connection
(1) : Input
(2) : Output
(3) : Ground
(4) : Terminal for external
capacitor
: EIAJ Monthly Code
Tolerance unless otherwise
specified : ±0.1mm
( ) : Reference
∗
(in mm)
1. SMD package in plastic emboss tape, available
for automatic placing.
2. They are slim, at only 1.5mm max. thickness,
and have a small mounting area (5.2x3.8mm) enabling
flexible PCB design.
3. Available for lead (Pb) free reflow soldering process.
4. Operating temperature range: 0 to +70°C
Storage temperature range: -55 to +85°C
5. No frequency adjustment is required in production
process.
6. Small, thin and lightweight package compared with
conventional LC filters
c Applications
1. IR headphone
2. Set Top Box for satellite broadcasting
10
Part Number
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
20dB
Bandwidth
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation(1)
(dB)
Spurious
Attenuation(2)
(dB)
Input/Output
Impedance
(ohm)
SFSKB2M30GF00-R1
2.300
fn±75 min.
650 max.
6.0 max.
25 min.
[within 1.3 to 1.8MHz]
23 min.
[within 2.8 to 3.3MHz]
1000
SFSKB2M80GF00-R1
2.800
fn±75 min.
650 max.
6.0 max.
25 min.
[within 1.8 to 2.3MHz]
25 min.
[within 3.3 to 3.8MHz]
1000
SFSKB3M20FF00-R1
3.200
fn±75 min.
650 max.
6.0 max.
30 min.
[within 2.2 to 2.8MHz]
30 min.
[within 3.8 to 4.2MHz]
1000
SFSKB3M80GF00-R1
3.800
fn±75 min.
650 max.
6.0 max.
30 min.
[within 2.8 to 3.2MHz]
30 min.
[within 4.3 to 4.8MHz]
1000
SFSKB4M30GF00-R1
4.300
fn±75 min.
650 max.
6.0 max.
30 min.
[within 3.3 to 3.8MHz]
30 min.
[within 4.8 to 5.3MHz]
1000
SFSKB4M80GF00-R1
4.800
fn±75 min.
650 max.
6.0 max.
30 min.
[within 3.8 to 4.3MHz]
30 min.
[within 5.2 to 5.8MHz]
1000
SFSKB5M20GF00-R1
5.200
fn±75 min.
650 max.
6.0 max.
30 min.
[within 4.2 to 4.8MHz]
30 min.
[within 5.7 to 6.2MHz]
1000
SFSKB5M70GF00-R1
5.700
fn±75 min.
650 max.
6.0 max.
30 min.
[within 4.7 to 5.2MHz]
30 min.
[within 6.2 to 6.7MHz]
1000
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
34
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Standard Land Pattern Dimensions
2.0
1.8
1.3
1.6
1.3
1.8
(in mm)
c Test Circuit
(1) : Input
(2) : Output
(3) : Ground
(4) : Terminal for external capacitor
R1+Rg=R2=1.0kΩ
Cc=39pF±5%
C2=10pF (Including stray capacitance and
Input capacitance of RF Voltmeter)
E1 : S.S.G. Output Voltage
R1+Rg=R2=1.0kΩ
Cc=33pF±5%
C2=10pF (Including stray capacitance and
Input capacitance of RF Voltmeter)
E1 : S.S.G. Output Voltage
E2
C2
(1) : Input
(2) : Output
(3) : Ground
(4) : Terminal for external capacitor
(1) : Input
(2) : Output
(3) : Ground
(4) : Terminal for external capacitor
(3)
S.S.G.
R1+Rg=R2=1.0kΩ
Cc=15pF±5%
C2=10pF (Including stray capacitance and
Input capacitance of RF Voltmeter)
E1 : S.S.G. Output Voltage
E2
(2)
C2
(4)
R2
Rg
S.S.G.
RF
Voltmeter
(1)
E1
E1
E2
(3)
C2
(2)
RF
Voltmeter
SFSKB4M80GF00-R1
R1
R2
(4)
Cc
Rg
(1)
(3)
S.S.G.
SFSKB4M30GF00-R1/SFSKB5M70GF00-R1
R1
(2)
Cc
R1+Rg=R2=1.0kΩ
Cc=22pF±5%
C2=10pF (Including stray capacitance and
Input capacitance of RF Voltmeter)
E1 : S.S.G. Output Voltage
(4)
E1
E1
S.S.G.
RF
Voltmeter
(1)
Cc
Rg
(3)
E2
(2)
R1
C2
(4)
R2
(1)
Cc
Rg
R1
SFSKB2M80GF00-R1/SFSKB3M20FF00-R1
R2
SFSKB2M30GF00-R1/SFSKB3MZ0GF00-R1
RF
Voltmeter
10
(1) : Input
(2) : Output
(3) : Ground
(4) : Terminal for external capacitor
(3)
S.S.G.
R1+Rg=R2=1.0kΩ
Cc=27pF±5%
C2=10pF (Including stray capacitance and
Input capacitance of RF Voltmeter)
E1 : S.S.G. Output Voltage
E2
(2)
C2
(4)
R2
(1)
E1
Rg
R1
Cc
SFSKB5M20GF00-R1
RF
Voltmeter
(1) : Input
(2) : Output
(3) : Ground
(4) : Terminal for external capacitor
35
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Frequency Characteristics
SFSKB2M80GF00-R1
0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
SFSKB2M30GF00-R1
30
40
50
60
70
1.300
30
40
50
60
1.800
2.300
2.800
70
1.800
3.300
2.300
Frequency (MHz)
0
0
10
10
20
20
30
40
50
60
2.700
3.200
3.700
70
2.800
4.200
3.300
5.800
6.200
6.700
SFSKB4M80GF00-R1
0
0
10
20
20
Attenuation (dB)
Attenuation (dB)
3.800
Frequency (MHz)
30
40
50
30
40
50
60
3.800
4.300
4.800
70
3.800
5.300
4.300
Frequency (MHz)
4.800
Frequency (MHz)
SFSKB5M20GF00-R1
SFSKB5M70GF00-R1
0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
5.300
60
60
30
40
50
60
30
40
50
60
4.700
5.200
Frequency (MHz)
36
4.800
50
10
70
4.200
4.300
40
SFSKB4M30GF00-R1
70
3.300
3.800
30
Frequency (MHz)
10
3.300
SFSKB3M80GF00-R1
Attenuation (dB)
Attenuation (dB)
SFSKB3M20FF00-R1
70
2.200
2.800
Frequency (MHz)
5.700
6.200
70
4.700
5.200
5.700
Frequency (MHz)
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Frequency Characteristics (Spurious)
SFSKB2M80GF00-R1
0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
SFSKB2M30GF00-R1
30
40
50
60
70
30
40
50
60
0.300
1.300
2.300
3.300
70
4.300
0.800
1.800
Frequency (MHz)
0
0
10
10
20
20
30
40
50
60
1.200
2.200
3.200
4.200
70
5.200
1.800
2.800
3.800
Frequency (MHz)
SFSKB4M80GF00-R1
0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
5.800
50
60
30
40
50
60
30
10
40
50
60
2.300
3.300
4.300
5.300
70
6.300
2.800
3.800
Frequency (MHz)
4.800
5.800
6.800
6.700
7.700
Frequency (MHz)
SFSKB5M20GF00-R1
SFSKB5M70GF00-R1
0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
4.800
40
SFSKB4M30GF00-R1
30
40
50
60
70
4.800
30
Frequency (MHz)
70
3.800
SFSKB3M80GF00-R1
Attenuation (dB)
Attenuation (dB)
SFSKB3M20FF00-R1
70
2.800
Frequency (MHz)
30
40
50
60
3.200
4.200
5.200
Frequency (MHz)
6.200
7.200
70
3.700
4.700
5.700
Frequency (MHz)
37
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (CERAFILr 455kHz) for Audio/Visual Equipment
Chip Type SFPKA Series
7.5±0.3
SFPKA series for AM use is one of the most
recommendable intermediate filters, having such
distinctive features as high selectivity, high
stability and adjustment-free operation.
Additionally, its easy matching with IC helps create an
easy circuit design.
8.4 max.
7.0±0.3
3.0±0.3
MARKING
EIAJ
CODE
5.0 max.
0.9±0.1
2.0±0.3
1.5±0.3
2.0±0.3
c Features
1.5±0.3
1.6±0.3
Connection
(1): Input
(2): Ground
(3): Output
(1) (2) (3)
1. The filters are mountable by automatic placers
and can be reflow soldered and withstand
washing.
2. The filters are wide bandwidth and high
selectivity, so they are suitable for car radio
and multi-band radio.
(in mm)
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Selectivity (-)
(dB)
Selectivity (+)
(dB)
Insertion
Loss
(dB)
Input/Output
Impedance
(ohm)
Element
SFPKA450KH1A-R1
450.0 ±1.0kHz
fn±3.0 min.
40 min.[fn-9kHz]
40 min.[fn+9kHz]
6.0 max.
2000
4
SFPKA450KG1A-R1
450.0 ±1.0kHz
fn±4.5 min.
40 min.[fn-10kHz]
40 min.[fn+10kHz]
6.0 max.
1500
4
Part Number
Area of Insertion Loss: at minimum loss point
Center frequency (fo) is defined by the center of 6dB bandwidth.
(fn) means nominal center frequency (450kHz).
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
c Standard Land Pattern Dimensions
c Recommended IFT
Type
SFPKA
Winding Specification
S(3)
1.6
2.475
0.8
Item
6.95
2.0
(1)—(2)
(2)—(3)
(4)—(6)
60T
125T
28T
(4)S
(2)
7.45
(1)
(Bottom view)
1.1
0.925
2.0
2.0
0.9
1.55
11
c Test Circuit
(3)
(1)
(2)
Rg
RF Voltmeter
E1
R2
E2
S.S.G.
0dBm
Rg+R1=R2=Input/Output Impedance
E1: S.S.G. Output Voltage
38
No load Qu
40
Tuning Capacitance
180pF
s-ATCHINGOF#%2!&),r3&0+!SERIESWITH)&4ISDECIDEDBYTHE1UOF)&4
AND)&4SECONDARYSIDEIMPEDANCE \:\3ETTHE1UATABOUTBECAUSE
A1UVALUEWHICHISTOOHIGHEG MAYPRODUCERIPPLEINTHEWAVEFORM
)TISRECOMMENDEDTOMATCHTHEIMPEDANCEOF\:\WITHTHATOFTHE
#%2!&),r
(in mm)
R1
(6)
(1): Input
(2): Ground
(3): Output
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Frequency Characteristics
0
400
10
360
10
360
20
320
20
320
30
280
30
280
40
240
40
240
50
200
50
200
60
160
60
160
70
120
70
120
80
80
80
80
90
40
90
40
0
100
100
425
450
Frequency (kHz)
475
Attenuation (dB)
400
425
450
475
G.D.T. (μsec.)
SFPKA450KG1A-R1
G.D.T. (μsec.)
Attenuation (dB)
SFPKA450KH1A-R1
0
0
Frequency (kHz)
11
39
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (CERAFILr 455kHz) for Audio/Visual Equipment
Lead Type SFPLA/CFWLA Series
MARKING
7.3±0.3
EIAJ
CODE
2.7±0.3
0.6±0.1
1.2±0.5
(1)
Connection
(1) : Input
(2) : Ground
(3) : Output
4.2±0.3
(2)
SFPLA Series
0.8±0.1
3.0±0.3
1.5 max.
0.15±0.05
0.3±0.1
SFPLA/CFWLA series for AM use is one of the most
suitable intermediate filters, having such
distinctive features as high selectivity, high
stability, high attenuation, and adjustment-free
operation. Additionally, its easy matching with IC
helps create an easy circuit design.
This is the most suitable for car stereo and
all band radio with high attenuation.
7.0±0.3
8.0±0.3
(3)
(in mm)
3.3±0.5
0.8±0.1
3.5±0.5
0.15
2.9±0.3
2.6±0.3
2.9±0.3
2.9—0.3
(4) (3)
(2)
(1)
(5)
2.3±0.5
4.3±0.3
1.35±0.5
1.2±0.5
CFWLA Series
1.5 max.
7.5±0.5
EIAJ
CODE
7.0±0.5
11.0±0.5
MARKING
0.6±0.1
Connection
(1): Input
(2)(3)(4): Ground
(5): Output
(in mm)
2.0±0.3
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Selectivity (-)
(dB)
Selectivity (+)
(dB)
Insertion
Loss
(dB)
Input/Output
Impedance
(ohm)
Element
SFPLA450KJ1A-B0
450.0 ±1.0kHz
fn±2.0 min.
40 min.[fn-7.5kHz]
40 min.[fn+7.5kHz]
6.0 max.
2000
4
SFPLA450KH1A-B0
450.0 ±1.0kHz
fn±3.0 min.
40 min.[fn-9kHz]
40 min.[fn+9kHz]
6.0 max.
2000
4
CFWLA450KJFA-B0
450.0 (fn)
fn±2.0 min.
50 min.[fn-7.5kHz]
50 min.[fn+7.5kHz]
7.0 max.
2000
6
CFWLA450KHFA-B0
450.0 (fn)
fn±3.0 min.
50 min.[fn-9kHz]
50 min.[fn+9kHz]
6.0 max.
2000
6
Part Number
Area of Insertion Loss: at minimum loss point
Center frequency (fo) is defined by the center of 6dB bandwidth.
(fn) means nominal center frequency (450kHz).
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
12
c Recommended IFT
c Test Circuit
SFPLA/CFWLA
Type
Item
7x7mm IFT
Winding Specification
S(3)
(1)—(2)
(2)—(3)
(4)—(6)
60T
125T
28T
R1
(4)S
Input
Output
Rg
(2)
(1)
(6)
(Bottom view)
No load Qu
40
Tuning Capacitance
180pF
s-ATCHINGOF#%2!&),r3&0,!#&7,!SERIESWITH)&4ISDECIDEDBYTHE
1UOF)&4AND)&4SECONDARYSIDEIMPEDANCE \:\3ETTHE1UATABOUT
BECAUSEA1UVALUEWHICHISTOOHIGHEG MAYPRODUCERIPPLEINTHE
WAVEFORM)TISRECOMMENDEDTOMATCHTHEIMPEDANCEOF\:\WITHTHATOF
THE#%2!&),r
40
RF
R2
SSG
Voltmeter
Ground
Rg+R1 =R2 : Input/Output Impedance
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Frequency Characteristics
IFT+CFWLA450KHFA-B0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
IFT+SFPLA450KH1A-B0
0
30
40
30
40
50
50
60
60
70
430
440
450
460
470
70
430
440
450
Frequency (kHz)
Frequency (kHz)
460
470
c Frequency Characteristics (Spurious)
IFT+CFWLA450KHFA-B0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
IFT+SFPLA450KH1A-B0
0
30
40
50
30
40
50
60
60
70
70
80
0
1
2
3
4
5
6
Frequency (MHz)
7
8
9
10
80
0
1
2
3
4
5
6
Frequency (MHz)
7
8
9
10
12
41
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (CERAFILr 455kHz) for Audio/Visual Equipment
For AM Stereo Wide Bandwidth Type SFPLA/CFWLA/CFULA Series
2.7±0.3
(2)
SFPLA Series
(1)
(3)
3.0±0.3
0.15±0.05
0.8±0.1
0.6±0.1
1.2±0.5
Connection
(1) : Input
(2) : Ground
(3) : Output
4.2±0.3
1.5 max.
7.3±0.3
EIAJ
CODE
(in mm)
8.0±0.3
MARKING
7.0±0.5
11.0±0.5
MARKING
2.3±0.5
13
(4) (3)
(2)
(1)
(5)
4.3±0.3
CFWLA Series
1.35±0.5
1.2±0.5
2.7±0.3
Connection
(1): Input
(2)(3)(4): Ground
(5): Output
(2)
(3)
(in mm)
2.0±0.3
1.2±0.5
0.6±0.1
Connection
(1): Input
(2): Ground
(3): Output
3.3±0.5
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Selectivity (-)
(dB)
Selectivity (+)
(dB)
Insertion
Loss
(dB)
SFPLA450KG1A-B0
450.0 ±1.0kHz
fn±4.5 min.
30 min.[fn-9kHz]
30 min.[fn+9kHz]
6.0 max.
SFPLA450KF1A-B0
450.0 ±1.0kHz
fn±6.0 min.
SFPLA450KE1A-B0
450.0 ±1.0kHz
fn±7.5 min.
40 min.[fn-12.5kHz] 40 min.[fn+12.5kHz]
40 min.[fn-15kHz]
(1)
CFULA Series
3.0±0.3
7.3±0.3
0.6±0.1
0.8±0.1
4.2±0.3
0.15±0.05
2.6±0.3
2.9±0.3
2.9—0.3
1.5 max.
3.5±0.5
0.15
2.9±0.3
0.8±0.1
1.5 max.
7.5±0.5
EIAJ
CODE
7.0±0.3
3.3±0.5
EIAJ
CODE
40 min.[fn+15kHz]
0.3±0.1
MARKING
0.3±0.1
SFPLA/CFULA/CFWLA series for AM use is one of
the most suitable intermediate filters, having such
distinctive features as high selectivity, high stability,
high attenuation, and adjustment-free operation.
Additionally, its easy matching with IC helps create
an easy circuit design.
Especially, CFULA/CFWLA_Y series improves the
frequency fidelity in the high sound area of an AM
stereo with its wide band and flat characteristics of
group delay time.
7.0±0.3
8.0±0.3
(in mm)
GDT 20µsec. Input/Output
Bandwidth
Impedance Element
(kHz)
(ohm)
-
2000
4
6.0 max.
-
2000
4
6.0 max.
-
1500
4
SFPLA450KD1A-B0
450.0 ±1.0kHz fn±10.0 min.
40 min.[fn-20kHz]
40 min.[fn+20kHz]
4.0 max.
-
1500
4
CFULA450KG1Y-B0
450.0 ±1.0kHz
fn±4.5 min.
40 min.[fn-15kHz]
40 min.[fn+15kHz]
10.0 max.
fn±3
2000
4
CFULA450KF1Y-B0
450.0 ±1.0kHz
fn±6.0 min.
CFULA450KD1Y-B0
450.0 ±1.0kHz fn±10.0 min.
CFWLA450KG1Y-B0
450.0 ±1.0kHz
fn±4.5 min.
CFWLA450KF1Y-B0
450.0 ±1.0kHz
fn±6.0 min.
CFWLA450KD1Y-B0
450.0 ±1.0kHz fn±10.0 min.
40 min.[fn-17.5kHz] 40 min.[fn+17.5kHz]
9.0 max.
fn±4
2000
4
40 min.[fn-25kHz]
40 min.[fn+25kHz]
7.0 max.
fn±7
1500
4
50 min.[fn-15kHz]
50 min.[fn+15kHz]
11.0 max.
fn±4
2000
6
50 min.[fn-17.5kHz] 50 min.[fn+17.5kHz] 10.0 max.
fn±5
2000
6
50 min.[fn-25kHz]
50 min.[fn+25kHz]
8.0 max.
fn±8
1500
6
50 min.[fn-10kHz]
50 min.[fn+10kHz]
6.0 max.
-
2000
6
6.0 max.
-
2000
6
CFWLA450KGFA-B0
450.0 (fn)
fn±4.5 min.
CFWLA450KFFA-B0
450.0 (fn)
fn±6.0 min.
CFWLA450KEFA-B0
450.0 (fn)
fn±7.5 min.
50 min.[fn-15kHz]
50 min.[fn+15kHz]
6.0 max.
-
1500
6
CFWLA450KDFA-B0
450.0 (fn)
fn±10.0 min.
50 min.[fn-20kHz]
50 min.[fn+20kHz]
4.0 max.
-
1500
6
50 min.[fn-12.5kHz] 50 min.[fn+12.5kHz]
Area of Insertion Loss: at minimum loss point
Center frequency (fo) is defined by the center of 6dB bandwidth.
(fn) means nominal center frequency (450kHz).
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
42
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Recommended IFT
c Test Circuit
SFPLA/CFULA/CFWLA
Type
Item
7x7mm IFT
Winding Specification
S(3)
(1)—(2)
(2)—(3)
(4)—(6)
60T
125T
28T
Input
R1
(4)S
Output
Rg
(2)
(1)
(6)
RF
R2
SSG
(Bottom view)
No load Qu
40
Tuning Capacitance
180pF
Voltmeter
Ground
s-ATCHINGOF#%2!&),r3&0,!#&5,!#&7,!SERIESWITH)&4ISDECIDED
BYTHE1UOF)&4AND)&4SECONDARYSIDEIMPEDANCE \:\3ETTHE1UAT
ABOUTBECAUSEA1UVALUEWHICHISTOOHIGHEG MAYPRODUCE
RIPPLEINTHEWAVEFORM)TISRECOMMENDEDTOMATCHTHEIMPEDANCEOF\:\
WITHTHATOFTHE#%2!&),r
Rg+R1 =R2 : Input/Output Impedance
c Frequency Characteristics
IFT+CFWLA450KFFA-B0
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
IFT+SFPLA450KF1A-B0
0
30
40
50
30
40
50
60
60
70
440
450
460
70
430
470
440
Frequency (kHz)
460
470
IFT+CFWLA450KF1Y-B0
10
10
20
200
30
100
40
0
50
60
Attenuation (dB)
0
Group Delay Time (μsec.)
Attenuation (dB)
IFT+CFULA450KF1Y-B0
0
70
430
450
Frequency (kHz)
20
200
30
100
40
0
50
Group Delay Time (μsec.)
430
60
440
450
Frequency (kHz)
460
470
70
430
440
450
460
470
Frequency (kHz)
13
43
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr 455kHz SFp Series Temperature Characteristics
3dB Bandwidth
(kHz)
Insertion Loss
(dB)
Center Frequency
(kHz)
c SFPLA450KH1A-B0
44
+1
Temperature (°C)
-20
0
20
40
0
20
40
60
80
0
-1
+1
0
60
80
Temperature (°C)
-20
-1
+1
Temperature (°C)
20
0
-20
-1
0
40
60
80
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Ceramic Trap) for Audio/Visual Equipment
4.5-6.5MHz Chip Type TPSKA Series
SMD ceramic trap TPSKA_B is a small and thin SMD trap
sealed with a metal cap recommended for LCD-TVs, and
small and thin tuners.
7.9±0.2
3.0±0.1
1.8±0.2
c Features
0.5±0.1
8.5±0.2
1. High attenuation and high performance group
delay time
2. Small and thin package
3. Reflow-solderable
0.6±0.2
3.8±0.2
1.0±0.1
1.3±0.2
0.3±0.1
1.3±0.2
(1)
(2)
(3)
(1) : Input
(2) : Ground
(3) : Output
(in mm)
2.5±0.2 2.5±0.2
Nominal Center Frequency (fn1)
(MHz)
Attenuation (at fn1)
(dB)
30dB Attenuation BW (fn1)
(kHz)
TPSKA4M50B00-R3
4.500
35 min.
50 min.
TPSKA5M50B00-R3
5.500
35 min.
70 min.
TPSKA6M00B00-R3
6.000
35 min.
70 min.
TPSKA6M50B00-R3
6.500
35 min.
70 min.
Part Number
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
c Standard Land Pattern Dimensions
c Test Circuit
L
1.0
1.0
1.5
1.0
R1
1.5
Rg
4.8
50Ω
R2
RF
Voltmeter
S.S.G.
Rg=50Ω
R1=330Ω
R2=1.0kΩ
L=15μH
(in mm)
c Frequency Characteristics
TPSKA5M50B00-R3
0
0
10
10
Attenuation (dB)
Attenuation (dB)
TPSKA4M50B00-R3
20
30
40
20
40
50
50
60
60
70
14
30
70
4.0
4.1
4.2
4.3
4.4
4.5
4.6
Frequency (MHz)
4.7
4.8
4.9
5.0
5.0
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
Frequency (MHz)
Continued on the following page.
45
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
c Frequency Characteristics
TPSKA6M50B00-R3
0
0
10
10
Attenuation (dB)
Attenuation (dB)
TPSKA6M00B00-R3
20
30
40
20
30
40
50
50
60
60
70
70
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
6.3
6.4
6.5
6.0
6.1
6.2
6.3
Frequency (MHz)
6.4
6.5
6.6
6.7
6.8
6.9
7.0
Frequency (MHz)
c Frequency Characteristics (Spurious)
700
0
1000
600
10
800
20
500
20
600
30
400
30
400
40
300
40
200
50
200
50
0
60
100
60
70
0
70
Attenuation (dB)
0
10
80
80
1.0
2.0
3.0
Frequency (MHz)
4.0
5.0
0
1.0
2.0
7.0
8.0
9.0
10.0
1000
0
1000
800
10
800
20
600
20
600
30
400
30
400
40
200
40
200
50
0
50
0
Attenuation (dB)
0
10
60
60
70
70
80
80
0
46
4.0
5.0
6.0
Frequency (MHz)
TPSKA6M50B00-R3
G.D.T. (nsec.)
Attenuation (dB)
TPSKA6M00B00-R3
3.0
1.0
2.0
3.0
4.0
5.0
6.0
Frequency (MHz)
7.0
8.0
9.0
10.0
0
1.0
2.0
3.0
4.0
5.0
6.0
Frequency (MHz)
7.0
8.0
9.0
10.0
G.D.T. (nsec.)
0
14
G.D.T. (nsec.)
TPSKA5M50B00-R3
G.D.T. (nsec)
Attenuation (dB)
TPSKA4M50B00-R3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Ceramic Discriminator) for Audio/Visual Equipment
0.3±0.2
10.7MHz Ultra Thin Chip Type CDSCB Series
0.2±0.2
1.4 max.
4.5±0.1
2.0±0.1
CDSCB10M7 series forms a resonator on a piezoelectric
ceramic substrate. In combination with ICs, this type
obtains stable demodulation characteristics in a wide
bandwidth.
They have 1.0mm max. thickness and small mounting area
(4.5x2.0mm).
0.4±0.05
1.0 max.
4.1 max.
0.4(ref.)
0.4(ref.)
0.8±0.1
0.8±0.1
c Features
1. Compact and high reliability and recommended for
automotive applications.
2. Can be combined with various ICs. The IC is
determined by the last number in the part number.
3. Stable demodulation characteristics can be
obtained without adjustment.
4. Stable temperature characteristics.
5. Available lead (Pb) free solder reflow.
1.5±0.1
1.5±0.1
(in mm)
Center
Frequency (fo)
(MHz)
Recovered
Audio 3dB BW
(kHz)
Recovered
Audio Output
(mV)
Distortion
(%)
S Curve
(mV)
IC
CDSCB10M7GA105A-R0
10.700 ±30kHz
220 min.
110 min.
1.5 max.
-
TEA5757HL
CDSCB10M7GA113-R0
10.700 ±30kHz
300 min.
110 min.
1.0 max.
-
TA2154FN
CDSCB10M7GA119-R0
10.700 ±30kHz
500 min.
75 min.
1.0 max.
-
TRF6901
CDSCB10M7GA121-R0
10.700 ±30kHz
390 min.
80 min.
1.0 max.
-
LV23100V
CDSCB10M7GA135-R0
10.700 ±30kHz
155 min.
75 min.
-
-
TH71101
CDSCB10M7GA136-R0
10.700 ±30kHz
140 min.
120 min.
-
-
TH7122
CDSCB10M7GF072-R0
10.700 (fn)
fn±150 min.
130 min.
2.0 max.
-
TA31161
CDSCB10M7GF107S-R0
10.700 (fn)
fn±80 min.
52 min.
3.0 max.
-
TA31272FN
CDSCB10M7GF109-R0
10.700 (fn)
fn±100 min.
170 min.
3.0 max.
-
TK14588V
CDSCB10M7GF123-R0
10.700 (fn)
-
-
-
900 min.
TA31275FN
CDSCB10M7GF123S-R0
10.700 (fn)
-
-
-
900 min.
TA31275FN
CDSCB10M7GF126-R0
10.700 (fn)
-
-
-
400 min.
NJM2295AV
Part Number
(fn) means nominal center frequency (10.700MHz).
For safety purposes, avoid applying a direct current between the terminals.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
c Standard Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
D
10.64MHz±30kHz
10.650MHz±25kHz
B
10.67MHz±30kHz
10.675MHz±25kHz
A
10.70MHz±30kHz
10.700MHz±25kHz
C
10.73MHz±30kHz
10.725MHz±25kHz
E
10.76MHz±30kHz
10.750MHz±25kHz
Z
Combination A, B, C, D, E
M
Combination A, B, C
15
47
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Standard Land Pattern Dimensions
2.6
3.0
1.0
2.0
1.0
(in mm)
c Test Circuit
CDSCB10M7GA105A-R0
CDSCB10M7GA113-R0
Vcc (1.2V)
35
3
34
4
33
5
32
6
100k
28
0.01μ
27
26
25
24
23
22
21
20
19
18
17
16
11
12
13
14
15
TA2154FN (TOSHIBA)
1
2
3
4
5
6
7
8
9
10
+
X
30
8
29
9
28
10
27
11
26
12
DC OUT
29
31
TEA5757HL
(PHILIPS)
7
30
S.S.G.
2.2μ
680p
2
0.01μ
+
100μ
0.01μ
10μ
+
48 47 46 45 44 43 42 41 40 39 38 37
0.1μ
1
36
0.01μ
0.1μ
0.01μ
Vcc (3.0V)
D.C. OUT
AF OUT
X: CDSCB10M7GA113-R0
Unit C: F
R: Ω
S.S.G.
10
25
0.47μ
0.1μ
+
X
AFC (n)
0.22μ
150
AF OUT
X: CDSCB10M7GA105A-R0
Unit C: F
R: Ω
CDSCB10M7GA119-R0
CDSCB10M7GA121-R0
Vcc (3.0V)
10p
10p
36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19
LV23100V (SANYO)
35
3
34
32
5
6
TRF6901
31
7
(TEXAS INSTRUMENTS)
30
8
29
9
28
100p 10
27
11
26
12
25
13 14 15 16 17 18 19 20 21 22 23 24
0.01μ
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18
10k
10μ
1000p
33
4
2
+
0.047μ
+
47p
+
0.47μ
0.01μ
3.3k
0.1μ
+
1μ
0.22μ
0.47μ
+
S.G.
100p
10k
+
PIC16F84 (Control IC)
PIC16F84
2
3
4
5
1k
2.2μ
6
7
1
8
2
3
4
5
6
7
8
9
9
10k
+
10k
18 17 16 15 14 13 12 11 10
18 17 16 15 14 13 12 11 10
1
100p
2
1
X
X
48 47 46 45 44 43 42 41 40 39 38 37
36
1μ
1
10k
0.01μ
82p
10
0.015μ
22μ+
0.047μ
4.7μ
Vcc (3.2V)
0.01μ
220k
15p
0.047μ
120p
75
0.01μ
D.C. Output
AF Output
68p
0.01μ
0.01μ
AF Output
IF Input
100μ
4.7μ
AFC (p)
330p
0.1μ
13 14 15 16 17 18 19 20 21 22 23 24
0.1μ
X: CDSCB10M7GA119-R0
Unit C : F
R: Ω
L: H
1k
X: CDSCB10M7GA121-R0
2.2μ
+
10k
0.1μ
Unit C: F
R: Ω
Continued on the following page.
15
48
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
c Test Circuit
CDSCB10M7GA135-R0
CDSCB10M7GA136-R0
Vcc (5.0V)
Vcc (5.0V)
AF-OUT
FKS-OUT
330p
0.1μ
0.1μ
24
23
22
21
20
19
18
17
25
16
26
100p
1000p
0.01μ
0.01μ
330k
15
27
14
TH7122
[Internal AFC Enabled]
(MELEXIS)
28
220k
29
12
30
0.01μ
24
23
22
21
20
19
18
15
27
14
10
32
16
26
11
31
17
25
2
3
0.01μ
4
5
6
7
8
0.1μ
29
0.01μ
330p
13
100k
0.033μ
12
S.G.
1000p
30
330p
AF-OUT
1000p
TH71101, TH71102,
TH71111 or TH71112
(MELEXIS)
FKS-OUT
330p
0.01μ
28
0.01μ
9
1
12p C.D.
330p
13
C.D.
11
3.3k
0.01μ
31
10
330p
0.01μ
32
9
1
2
3
4
5
6
7
100k
8
18
0.01μ
17
16
1
2
3
13
4
5
6
12
11
7
1k
X: CDSCB10M7GA135-R0
330p
100p
14
10
PIC16F84 (Control IC)
S.G.
+
10μ
15
8
9
10k
X: CDSCB10M7GA136-R0
+
2.2μ
Unit C: F
R: Ω
CDSCB10M7GF072-R0
Unit C: F
R: Ω
0.1μ
CDSCB10M7GF109-R0
Vcc (3V)
0.01μ
1.2μ
Vcc (3V)
4.7μ
R
X
X
0.01μ
D.C. OUT
10p
13
12
11
10
8p
12k
9
51k
5
6
0.01μ
7
8
16
X: CDSCB10M7GF072-R0
R: 820
Unit C: F
R: Ω
L: H
+
33μ
0.01μ
14
13
12
11
10
9
7
8
TK14588V (TOKO)
1
2
3
4
5
51
IF IN
15
0.01μ
4
0.01μ
3
0.01μ
2
0.01μ
1
0.01μ
14
TA31161 (TOSHIBA)
6
+
S.S.G.
4.7μ
15
0.01μ
16
AF OUT
0.01μ
1000p
X: CDSCB10M7GF109-R0
R: 820
Unit C: F
R: Ω
L: H
CDSCB10M7GF123-R0
CDSCB10M7GF126-R0
Vcc (5.0V)
22
1
2
3
21
20
19
0.01μ
0.01μ
18
17
16
20
15
14
13
8
9
10
11
12
16
15
14
1
2
3
4
5
6
7
0.01μ
0.1μ
7
17
1.8k
6
0.01μ
5
18
13
12
8
9
11
NJM2295AV (JRC)
TA31275FN (TOSHIBA)
4
19
+
10μ
23
0.01μ
1000p
3300p
24
DC-OUT
+
DC-OUT
0.01μ
10μ
0.01μ
AF OUT
100p
Vcc (5.0V)
10
8p
S.S.G.
X: CDSCB10M7GF123-R0
Unit C: F
R: Ω
180
10μ+
0.01μ
10μ+
0.1μ
0.01μ
0.1μ
C.D.
0.1μ
AF OUT
R
0.01μ
X: CDSCB10M7GF126-R0
S.G.
Unit C: F
R: Ω
15
49
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
c Recovered Audio Curve
CDSCB10M7GA105A-R0
1000
CDSCB10M7GA113-R0
100
1000
10
100
100
AF Output
1
1
10
Distortion
10
1
1
0.1
T.H.D. (%)
10
T.H.D. (%)
AF Output Voltage (mV)
Distortion
AF Output Voltage (mV)
AF Output
100
0.1
Input = 100dBμ
fdev. = ±75kHz
fmod. = 1kHz
Vcc = 3.0V
10.4
10.5
10.6
10.7
10.8
10.9
11.0
11.1
10.3
10.4
10.5
Frequency (MHz)
10.6
CDSCB10M7GA119-R0
1000
10.8
10.9
11.0
11.1
CDSCB10M7GA121-R0
100
1000
10
100
100
AF Output
1
1
T.H.D. (%)
Distortion
10
AF Output Voltage (mV)
AF Output
100
AF Output Voltage (mV)
10.7
Frequency (MHz)
10
Distortion
10
1
1
0.1
0.1
Input = 100dBμ
fdev. = ±75kHz
fmod. = 1kHz
Vcc = 3.2V
Input = 100dBμ
fdev. = ±60kHz
fmod. = 1kHz
Vcc = 3.0V
10.3
10.4
10.5
10.6
10.7
10.8
10.9
11.0
10.3
11.1
10.4
CDSCB10M7GA135-R0
10.6
10.7
10.8
10.9
11.0
11.1
CDSCB10M7GA136-R0
1000
1000
100
100
AF Output Voltage (mV)
AF Output Voltage (mV)
10.5
Frequency (MHz)
Frequency (MHz)
10
1
10
1
Input = 100dBμ
fdev. = ±50kHz
fmod. = 1kHz
Vcc = 5.0V
15
0.1
10.4
T.H.D. (%)
10.3
Input = 100dBμ
fdev. = ±75kHz
fmod. = 1kHz
Vcc = 1.2V
10.5
10.6
10.7
10.8
Frequency (MHz)
10.9
11.0
0.1
10.4
Input = 100dBμ
fdev. = ±50kHz
fmod. = 1kHz
Vcc = 5.0V
10.5
10.6
10.7
10.8
10.9
11.0
Frequency (MHz)
Continued on the following page.
50
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
c Recovered Audio Curve
CDSCB10M7GF072-R0
CDSCB10M7GF109-R0
100
10
100
10
10
1
10
1
1
0.1
0.1
1
Input = 100dBμ
fdev. = ±80kHz
fmod. = 1kHz
Vcc = 3.0V
10.3
10.4
10.5
10.6
10.7
10.8
10.9
11.0
T.H.D. (%)
100
AF Output Voltage (mV)
1000
T.H.D. (%)
100
AF Output Voltage (mV)
1000
Input = 100dBμ
fdev. = ±64kHz
fmod. = 1kHz
Vcc = 3.0V
11.1
10.3
10.4 10.5
Frequency (MHz)
10.6
10.7
10.8
10.9
11.0
11.1
Frequency (MHz)
c S Curve
CDSCB10M7GF123-R0
CDSCB10M7GF126-R0
4.0
2.5
2.0
3.0
Volt (V)
Volt (V)
1.5
1.0
2.0
0.5
0.0
10.3
10.4
10.5
10.6
10.7
10.8
Frequency (MHz)
10.9
11.0
11.1
1.0
10.3
10.4
10.5
10.6
10.7
10.8
10.9
11.0
11.1
Frequency (MHz)
15
51
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Discriminator 10.7MHz Applied IC Reference Table
Please see the following table to reference applied IC.
If you cannot find the IC part number you are seeking, please contact our sales representative.
ex. : CDSCB10M7GA105A-R0
Suffix Number
IC Manufacturer
IC Part Number
Suffix Number
TA2003
031
034V
TA2007
033
TDA1576T
051
TA2008A / AN
045
TDA6160X
038
TA2022
050
Panasonic
AN7004
011
TA2057
057
AN7232
053
TA2099N
082
Freescale
MC13156
049
TA2104AFN
080
MC13158
073
TA2104F
080A
μPC1391M
056
TA2111N / F / FN
077
NE604
020
TA2132
092
SA605
042
TA2132BP
092D
SA626
047
TA2142FN
102
SA636DK
096
TA2149AN
100A
ATMEL
INFINEON
Renesas
NXP
ROHM
IC Part Number
Suffix Number
U4313B
081
U4490B
IC Manufacturer
TOSHIBA
SA639
085
TA2149N
100
TDA1596T
120
TA2154FN
113
TEA5710
040
TA2159F
116
TEA5757HL
105A
TA31161
072
TEA5762 / 5757
061
TA31275FN
123
UAA3220TS
098
TA7303P
008
BA1448
060
TA7640AP
006
BA4230AF
005
TA8122AN / AF
016
BA4234L
004
TA8132AN / AF
018
SAMSUNG
S1A0903
118A
TB2132FN
128
SANYO
LA1225M
108A
LA1814M
115
LA1823
101
LA1827M
083
LA1831
043
LA1832 / M
046
LA1833
086
LA1835 / M
048
LA1838 / M
079
LA7770
023
LV23000M
114
LV23100V
121
CX1691M
078
CX-20029
001
CXA1111
093
SONY
CXA1238
027
CXA1238N
027N
CX1343M
032
CXA1376AM
054
CXA1538M / N / S
069
CXA1611
075
CX3067M
076
T. I.
TRF6901
119
TOKO
TK14570L
122
TK14583V
112
TK14588V
109
52
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
conditions.
Temperature (°C)
c CERAFILr 10.7MHz Chip Type SFECF Series
o Soldering and Mounting
Peak
(260°C max.)
260
230
Pre-heating
(150-180°C)
100
Heating
(230°C)
Gradual
Cooling
30 sec.
min.
60-120 sec.
40 sec.
max.
120 sec.
min.
(2) Soldering Iron
Filter is soldered at +350±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(3) Conditions for Placement Machines
The component is recommended for use with placement
machines that employ optical placement capabilities. The
component might be damaged by excessive mechanical
force. Please make sure that you have evaluated by
using placement machines before going into mass
production. Do not use placement machines that utilize
mechanical positioning. Please contact Murata for details
beforehand.
(4) Other
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. To prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated on positioning accuracy,
etc. Careful checking and maintenance are necessary
to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. Solder containing Ag should be used to
prevent electrode erosion.
(f) Do not use strong acidity flux, more than 0.2wt%
chlorine content, in reflow soldering.
[Component Direction]
Place the
component
lateral to the
direction in
which stress
acts.
[Component Layout Close to Board]
Perforation
A
B
Slit
C
Susceptibility to
stress is in the order
of : A>C>B
Continued on the following page.
53
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
Continued from the preceding page.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
o Storage and Operating Conditions
1. Product Storage Conditions
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to storage in a chemical
atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
2. The components, packed in a moisture proof bag (dry
pack), are sensitive to moisture. The following treatment
is required before applying reflow soldering, to avoid
reliability degradation caused by thermal stress. When
unpacked, store the component in an atmosphere of
reflow 30°C and below 60%R.H., and solder within 1
week.
54
3. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
conditions.
Temperature (°C)
c CERAFILr 10.7MHz Chip Type SFECV/SFECK Series
o Soldering and Mounting
Peak
(240°C max.)
240
230
Pre-heating
(150-180°C)
100
Heating
(230°C)
Gradual
Cooling
30 sec.
min.
60-120 sec.
30 sec.
max.
120 sec.
min.
(2) Soldering Iron
Filter is soldered at +350±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(3) Conditions for Placement Machines
The component is recommended for use with placement
machines that employ optical placement capabilities.
Damage may result from excessive mechanical force.
Please make sure that you have evaluated by using
placement machines before going into mass production.
Do not use placement machines that utilize mechanical
positioning. Please contact Murata for details beforehand.
(4) Other
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. To prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated to one positioning
accuracy, etc. Careful checking and maintenance are
necessary to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. Solder containing Ag should be used to
prevent electrode erosion.
(f) Do not use strong acidity flux, more than 0.2wt%
chlorine content, in reflow soldering.
[Component Direction]
Put the
component
lateral to the
direction in
which stress
acts.
[Component Layout Close to Board]
Perforation
A
B
Slit
C
Susceptibility to
stress is in the order
of : A>C>B
Continued on the following page.
55
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
Continued from the preceding page.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
o Storage and Operating Conditions
1. Product Storage Conditions
Please store the products in room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (Shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because the
products may be degraded in solderability due to storage
under poor conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to the storage in a chemical
atmosphere.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics.
Miscorrelation may be caused if there is any deviation,
especially stray capacitance, from the test circuit in the
specification.
2. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
56
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in the places such as
a damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under the poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
c CERAFILr 10.7MHz Lead Type SFELF Series
o Soldering and Mounting
The component cannot withstand washing.
o Storage and Operating Conditions
1. Product Storage Conditions
Please store the products in room where the
temperature/humidity is stable, and avoid such places
where there are large temperature changes. Please store
the products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (Shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because the
products may be degraded in solderability due to storage
under poor conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to the storage in a chemical
atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in the places such as
a damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under the poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Do not use this product with bend. The component may
be damaged if excess mechanical stress is applied to it
mounted on the printed circuit board.
2. Do not apply any type of reflow soldering on the
component.
3. Do not clean or wash the component as it is not
hermetically sealed.
4. Do not use strong acidity flux, more than 0.2wt% chlorine
content, in flow soldering.
5. In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
6. Accurate test circuit values are required to measure
electrical characteristics. It may be a cause of
miscorrelation if there is any deviation, especially stray
capacitance, from the test circuit in the specification.
7. For safety purposes, avoid applying a direct current
between the terminals.
57
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
conditions.
Temperature (°C)
c CERAFILr 4.5-6.5MHz Chip Type SFSKA Series
o Soldering and Mounting
Peak
(260°C max.)
260
230
Pre-heating
(150-180°C)
100
Heating
(230°C)
Gradual
Cooling
30 sec.
min.
60-120 sec.
40 sec.
max.
120 sec.
min.
(2) Soldering Iron
Filter is soldered at +350±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(3) Conditions for Placement Machines
The component is recommended for use with placement
machines that employ optical placement capabilities.
Damage may result from excessive mechanical force.
Please make sure that you have evaluated by using
placement machines before going into mass production.
Do not use placement machines that utilize mechanical
positioning. Please contact Murata for details beforehand.
(4) Other
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause
destruction resistance characteristics to degrade. To
prevent this, be extremely careful in determining
shape and dimension before designing the circuit
board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated to one positioning
accuracy, etc. Careful checking and maintenance are
necessary to prevent unexpected trouble.
(e) When correcting chips with a soldering iron, the tip of
the soldering iron should not directly touch the chip
component.
[Component Direction]
Put the
component
lateral to the
direction in
which stress
acts.
[Component Layout Close to Board]
Perforation
A
Susceptibility to
stress is in the order
of : A>C>B
B
Slit
C
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
Continued on the following page.
58
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
Continued from the preceding page.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
o Storage and Operating Conditions
1. Product Storage Conditions
Please store the products in room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (Shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because the
products may be degraded in solderability due to storage
under poor conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to the storage in a chemical
atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in the places such as
a damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under the poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics.
Miscorrelation may be caused if there is any deviation,
especially stray capacitance, from the test circuit in the
specification.
2. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
59
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
conditions.
Temperature (°C)
c CERAFILr 2.3-5.7MHz Chip Type SFSKB Series
o Soldering and Mounting
Peak
(260°C max.)
260
200
Pre-heating
(150-170°C)
100
Heating
(200°C)
Gradual
Cooling
30 sec.
min.
60-120 sec.
60 sec.
max.
120 sec.
min.
(2) Soldering Iron
Filter is soldered at +350±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(3) Conditions for Placement Machines
The component is recommended for use with placement
machines that employ optical placement capabilities.
Damage may result from excessive mechanical force.
Please make sure that you have evaluated by using
placement machines before going into mass production.
Do not use placement machines that utilize mechanical
positioning. Please contact Murata for details beforehand.
(4) Other
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. To prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated to one positioning
accuracy, etc. Careful checking and maintenance are
necessary to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. Solder containing Ag should be used to
prevent the electrode erosion.
(f) Do not use strong acidity flux, more than 0.2wt%
chlorine content, in reflow soldering.
[Component Direction]
Put the
component
laterally to the
direction in
which stress
acts.
[Component Layout Close to Board]
Perforation
A
Susceptibility to
stress is in the order
of : A>C>B
B
Slit
C
Continued on the following page.
60
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
Continued from the preceding page.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
o Storage and Operating Conditions
1. Product Storage Conditions
Please store the products in room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (Shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because the
products may be degraded in solderability due to storage
under poor conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to the storage in a chemical
atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in the places such as
a damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under the poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics.
Miscorrelation may be caused if there is any deviation,
especially stray capacitance, from the test circuit in the
specification.
2. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
61
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
c CERAFILr 455kHz Chip Type SFPKA Series
o Soldering and Mounting
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
conditions.
0EAK
(260°C max.)
Temperature (°C)
260
230
Heating
(230°C)
Pre-heating
100
(150-180°C)
30 sec.
min.
60-120 sec.
Gradual
Cooling
SEC
max.
120 sec.
min.
(2) Soldering Iron
Electrode is directly soldered with the tip of soldering iron
at +350±5°C for 3.0±0.5 seconds.
(3) Other
Do not use strong acidity flux, more than 0.2wt% chlorine
content, in reflow soldering.
2. Wash
(1) Cleaning Solvent
CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA),
7ATER$EMINERALIZED7ATER #LEANING7ATER3OLUTION
(Cleanthrough-750H, Pine Alpha 100S), Silicon
4ECHNOCARE&27
(2) Cleaning Conditions
s)MMERSION7ASH
2 minutes max. in above solvent at +60°C max.
s3HOWEROR2INSE7ASH
2 minutes max. in above solvent at +60°C max.
(3) Notice
s7HENCOMPONENTSAREIMMERSEDINSOLVENT BESURETO
maintain the temperature of components below the
temperature of solvent.
s0LEASEDONOTUSEULTRASONICCLEANING
s4OTALWASHINGTIMESHOULDBEMINUTESMAXIMUM
s0LEASEENSURETHECOMPONENTISTHOROUGHLYEVALUATEDIN
your application circuit.
s0LEASEDONOTUSECHLORINE PETROLEUMORALKALICLEANING
solvent.
s)FYOUPLANTOUSEANYOTHERTYPESOFSOLVENTS PLEASE
consult with Murata or a Murata representative prior to
using.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
Continued on the following page.
62
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
Continued from the preceding page.
o Storage and Operating Conditions
1. Product Storage Conditions
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to storage in a chemical
atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. If the component is cleaned, please confirm that the
reliability has not been degraded.
2. The components, packed in a moisture-proof bag (dry
pack), are sensitive to moisture. The following treatment
is required before applying reflow soldering, to avoid
package cracks or reliability degradation caused by
thermal stress. When unpacked, store the component in
an atmosphere of below 25°C and below 65%R.H., and
solder within 48 hours.
3. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
63
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
c CERAFILr 455kHz Lead Type SFPLA/CFWLA/CFULA Series
o Soldering and Mounting
The component cannot withstand washing.
o Storage and Operating Conditions
1. Product Storage Conditions
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to storage in a chemical
atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Do not use this product with bend. The component may
be damaged if excessive mechanical stress is applied to
it mounted on the printed circuit board.
2. All kinds of reflow soldering must not be applied on the
component.
3. Do not clean or wash the component as it is not
hermetically sealed.
4. Do not use strong acidity flux, more than 0.2wt% chlorine
content, in flow soldering.
64
5. Conformal coating of the component is not acceptable
due to non-sealed construction.
6. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
7. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
conditions.
Temperature (°C)
c Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series
o Soldering and Mounting
Peak
(260°C max.)
260
230
Pre-heating
(150-180°C)
100
Heating
(230°C)
Gradual
Cooling
30 sec.
min.
60-120 sec.
40 sec.
max.
120 sec.
min.
(2) Soldering Iron
Filter is soldered at +350±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(3) Conditions for Placement Machines
The component is recommended for use with placement
machines that employ optical placement capabilities.
Damage may result from excessive mechanical force.
Please make sure that you have evaluated by using
placement machines before going into mass production.
Do not use placement machines that utilize mechanical
positioning. Please contact Murata for details beforehand.
(4) Other
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause
destruction resistance characteristics to degrade. To
prevent this, be extremely careful in determining
shape and dimension before designing the circuit
board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated to one positioning
accuracy, etc. Careful checking and maintenance are
necessary to prevent unexpected trouble.
(e) When correcting chips with a soldering iron, the tip of
the soldering iron should not directly touch the chip
component.
[Component Direction]
Put the
component
lateral to the
direction in
which stress
acts.
[Component Layout Close to Board]
Perforation
A
Susceptibility to
stress is in the order
of : A>C>B
B
Slit
C
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
Continued on the following page.
65
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
Continued from the preceding page.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
o Storage and Operating Conditions
1. Product Storage Conditions
Please store the products in room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (Shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because the
products may be degraded in solderability due to storage
under poor conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to the storage in a chemical
atmosphere.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics.
Miscorrelation may be caused if there is any deviation,
especially stray capacitance, from the test circuit in the
specification.
2. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
66
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in the places such as
a damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under the poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
conditions.
Temperature (°C)
c Ceramic Discriminator 10.7MHz Chip Type CDSCB Series
o Soldering and Mounting
Peak
(260°C max.)
260
230
Pre-heating
(150-180°C)
100
Heating
(230°C)
Gradual
Cooling
30 sec.
min.
60-120 sec.
40 sec.
max.
120 sec.
min.
(2) Soldering Iron
Filter is soldered at +300±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(3) Conditions for Placement Machines
The component is recommended for use with placement
machines that employ optical placement capabilities. The
component might be damaged by excessive mechanical
force. Please make sure that you have evaluated by
using placement machines before going into mass
production. Do not use placement machines that utilize
mechanical positioning. Please contact Murata for details
beforehand.
(4) Other
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. To prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated on positioning accuracy,
etc. Careful checking and maintenance are necessary
to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. Solder containing Ag should be used to
prevent electrode erosion.
[Component Direction]
Place the
component
laterally to the
direction in
which stress
acts.
[Component Layout Close to Board]
Perforation B
A
Slit
C
Susceptibility to
stress is in the order
of : A>C>B
Continued on the following page.
67
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
Continued from the preceding page.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
o Storage and Operating Conditions
1. Product Storage Conditions
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to storage in a chemical
atmosphere.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
2. For safety purposes, avoid applying a direct current
between the terminals.
68
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging
c Minimum Quantity
Taping
ø330mm
ø180mm
Ammo Pack
Bulk
1,500
500
Magazine
Box
CERAFILr
SFECF
2,000
SFECV/SFECK
2,000
SFELF
CERAFILr
SFSKA
3,000
SFSKB
3,000
CERAFILr
200
CFULA
CFWLA
1,000
50
150
SFPLA
1,000
50
200
TPSKA
3,000
Ceramic Traps
Ceramic Discriminators
2,000
CDSCB
c CERAFILr 10.7MHz Chip Type SFECF Series
Dimensions of Carrier Tape
Dimensions of Reel
Cover film
0.3±0.05
Peeling strength
(0.1 to 0.7N)
+0.1
3.35 -0.05
(3°)
10° max.
Empty
3° max.
Leader
Cover film
Components
Empty
240 to 280
ø13.0±0.5
400 to 560
180 +0
-1.5
60 +1.0
-0
12.0±0.2
5.5±0.05
1.84±0.1
4.0±0.1
(0.05)
4.1±0.1
Chip filter
2.0±0.5
4.1±0.1
ø1.55±0.05 2.0±0.05
Trailer
160 to 190
1.75±0.1
4.0±0.1
17.0±1.0
13.0 +1.0
-0
User direction of feed
( ): Reference
(in mm)
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP
c CERAFILr 10.7MHz Chip Type SFECV/SFECK Series
Dimensions of carrier tape
Trailer
160-190
1.75±0.1
∗
∗∗
∗∗
+0
∗
∗∗
Empty
240-280
400-560
180 –1.5
∗
∗∗
+1.0
∗
∗∗
ø13.0±0.5
60 –0
∗
Leader
Cover film
Empty Components
12.0±0.2
4.0±0.1
5.5±0.05
2.0±0.05
7.3±0.01
+0.1
ø1.5 –0.0
Dimensions of reel
1.9±0.1
(3°)
+0.1
Chip filter
Peeling strength 0.1 to 0.7N
Cover film
10° max.
1.7 –0.05
3.0±0.1
0.3±0.05
2.0±0.5
4.0±0.1
+1.0
13.0 –0
17.0±1.0
User direction of feed
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP
(
) : Reference
(in mm)
Continued on the following page.
69
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging
Continued from the preceding page.
c CERAFILr 10.7MHz Lead Type SFELF Series
P2
dh dh
P
H0
W0
W1
W
L2
L1
W2
dS1
F 1 F1
P1
D0
F
t
P0
Item
Code
Dimensions
Tolerance
Lead length under the hold down tape
L1
3.0 min.
Length of cut-off
L2
2.0 max.
Pitch of components
P
12.7
±0.5
Pitch of sprocket hole (1)
P0
12.7
±0.2
Length from hole center to lead
P1
3.85
±0.5
Length from hole center to component center
P2
6.35
Lead spacing (1)
F
5.0
Lead spacing (2)
F1
2.5
±0.5
+0.5
–0.2
±0.2
Slant forward or backward
dh
0
±1.0
Slant to the left or right
dS1
0
±1.0
±0.5
-
Width of carrier tape
W
18.0
Width of hold down tape
W0
6.0 min.
Position of sprocket hole
W1
9.0
±0.5
Gap of hold down tape and carrier tape
W2
0
+0.5
–0
Distance between the center of sprocket
hole and lead stopper
H0
18.0
±0.5
Diameter of sprocket hole
D0
ø4.0
±0.2
0.6
±0.2
254.0
±1.5
Total tape thickness
Pitch of sprocket hole (2)
t
P020
Remarks
To distinguish the direction
-
Hold down tape doesn't exceed
the carrier tape
The pitch of 20 sprocket holes
(in mm)
Continued on the following page.
70
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging
Continued from the preceding page.
c CERAFILr 4.5-6.5MHz Chip Type SFSKA Series
Chip filter
(3°)
Leader
Cover film
16.0±0.2
Trailer
160 to 190
Empty Components
2.2±0.5
Empty
240 to 280 min.
400 to 560
80±1
330±2
4.3±0.1
8.0±0.1
10° max.
+0.1
Peeling strength
(0.1 to 0.7N)
Cover film
2.1–0.05
+0.1
ø1.5 –0.0
0.3±0.05
9.0±0.1
7.5±0.1
2.0±0.1 4.0±0.1
ø1.5 –0.0
2.3±0.1
+0.1
Dimensions of Reel
1.75±0.1
Dimensions of Carrier Tape
ø13.0±0.2
17.5±0.5
21.5±1.0
User direction of feed
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUPSIDE
(in mm)
c CERAFILr 2.3-5.7MHz Chip Type SFSKB Series
∗
Empty Components
400 to 560
8.0±0.1
1.6±0.1
2.2±0.2
ø13.0±0.2
Cover Film
4.2±0.1
Empty
240 to 280
(ø80)
(ø330)
∗
Leader
Cover Film
Trailer
160 to 190
5.6±0.1
∗
5.5±0.1
∗
+0.1
ø1.5 –0.0
12.0±0.2
4.0±0.1
2.0±0.1
Dimensions of Reel
1.75±0.1
Dimensions of Carrier Tape
5SERDIRECTIONOFFEED
Label
13.5±1.0
17.5±1.5
s0ART.UMBERMARKEDSIDEISALWAYSFACINGUPSIDE
(in mm)
c CERAFILr 455kHz Chip Type SFPKA Series
Dimensions of Carrier Tape
Trailer
160 to 190
1.75±0.1
Empty
Leader
Cover film
Components
Empty
240 to 280
ø13.0±0.2
330±2
400 to 560
80±1
8.8±0.1
+0.1
-0
7.5±0.1
2.0±0.1
ø1.5
16.0±0.2
4.0±0.1
Dimensions of Reel
2.2±0.5
12.0±0.1
User direction of feed
5.3±0.1
Cover film
17.5±0.5
Label
21.5±1.0
7.4±0.1
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP
(in mm)
Continued on the following page.
71
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging
Continued from the preceding page.
c CERAFILr 455kHz Lead Type SFPLA Series
Standard of Magazine Cassette
9.0±0.3
405±1.0
7.6±0.25
8.1±0.3 10±0.3
2. Quality of Magazine
(1) Transparent so that input / output direction is visually
recognizable.
(2) With an angle of 35° CERAFILr should slip down
smoothly.
(3) Antistatic finish
(4) Recycling
Note: Magazines should be sent back for recycling.
(Therefore, empty magazines should not be damaged.)
3. Dimensions of Magazine Cassette
18.7±0.3
1. Putting CERAFILr into Magazine
A magazine should contain 50pcs of CERAFILr, with
ground terminals all facing toward the "Murata" mark on a
magazine, and be closed with exclusive stoppers at both
ends. Above should be the minimum packaging unit.
1.1
HP51M0003-02
1.1
(in mm)
Tolerance unless otherwise specified: ±0.2
Material: Polycarbonate
Camber of Case: ±1mm max. against entire length (reference)
Twist of Case: ±0.5mm max. (reference)
c CERAFILr 455kHz Lead Type CFWLA Series
Standard of Magazine Cassette
9.0±0.3
7.3±0.25
576.0±2.0
7.5±0.3 9.0±0.3
2. Quality of Magazine
(1) Transparent so that input / output direction is visually
recognizable.
(2) With an angle of 35° CERAFILr should slip down
smoothly.
(3) Antistatic finish
(4) Recycling
Note: Magazines should be sent back for recycling.
(Therefore, empty magazines should not be damaged.)
4. Dimensions of Magazine Cassette
18.7±0.3
1. Putting CERAFILr into Magazine
A magazine should contain 50pcs of CERAFILr, with
ground terminals all facing toward the "Murata" mark on a
magazine, and be closed with exclusive stoppers at both
ends. Above should be the minimum packaging unit.
ANTISTATIC
muRataHP51M0064
5.3±0.3
0.6
(in mm)
Tolerance unless otherwise specified: ±0.2
Material: Polycarbonate
Camber of Case: ±1mm max. against entire length (reference)
Twist of Case: ±0.5mm max. (reference)
3. Magazine should be packaged in a cardboard box.
MURATA model name, quantity and outgoing inspection
number should be indicated on the box.
Cardboard box may contain maximum 33 magazines
(1,650 pieces of filter).
Continued on the following page.
72
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging
Continued from the preceding page.
c Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series
Leader
Cover film
16.0±0.2
Trailer
160 to 190
Empty Components
Empty
240 to 280 min.
2.2±0.5
400 to 560
80±1
330±2
Chip filter
(3°)
10° max.
+0.1
4.3±0.1
8.0±0.1
0.3±0.05
Peeling strength
(0.1 to 0.7N)
Cover film
+0.1
ø1.5 –0.0
2.1–0.05
9.0±0.1
7.5±0.1
2.0±0.1 4.0±0.1
ø1.5 –0.0
2.3±0.1
+0.1
Dimensions of Reel
1.75±0.1
Dimensions of Carrier Tape
ø13.0±0.2
17.5±0.5
21.5±1.0
User direction of feed
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUPSIDE
(in mm)
c Ceramic Discriminator 10.7MHz Chip Type CDSCB Series
$IMENSIONSOF#ARRIER4APE
ø1.5
2.0±0.05
Dimensions of reel
1.75±0.1
4.0±0.1
+0.1
-0
4RAILER
160 to 190
,EADER
Cover film
10°
Cover film
(3°)
User direction of feed
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP
%MPTY
240 to 280
400 to 560
180 +0.1
-1.5
+0.1
ø13.0±0.2
60 -0
12.0±0.2
MAX
2.2±0.1
1.1±0.1
4.7±0.1
+0.1
ø1.5 -0
0.3±0.05
(9.0)
4.0±0.1
0EELINGSTRENGTH
0.1 to 0.7N
5.5±0.05
%MPTY #OMPONENTS
2.0±0.5
+1.0
13.0 -0
17.0±1.0
(
): Reference
(in mm)
73
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number Index
CDSCB · · · · · · · · · · Chip Ceramic Discriminators for FM · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · p47
CFULA · · · · · · · · · · Ceramic Filters (CERAFILr) for AM · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · p42
CFWLA · · · · · · · · · · Ceramic Filters (CERAFILr) for AM · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · p40, 42
SFECF · · · · · · · · · · Chip Ceramic Filters (CERAFILr) for FM · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · p5-6
SFECK · · · · · · · · · · Chip Ceramic Filters (CERAFILr) for FM · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · p11
SFECV · · · · · · · · · · Chip Ceramic Filters (CERAFILr) for FM · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · p11
SFELF · · · · · · · · · · Ceramic Filters (CERAFILr) for FM · · · · · · · · · · · · · · · · · · · · · · · p14, 17, 20-21, 23, 25, 27
SFPKA · · · · · · · · · · Chip Ceramic Filters (CERAFILr) for AM · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · p38
SFPLA · · · · · · · · · · Ceramic Filters (CERAFILr) for AM · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · p40, 42
SFSKA · · · · · · · · · · Chip Ceramic Filters (CERAFILr) for TV/VCR · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · p31
SFSKB · · · · · · · · · · Chip Ceramic Filters (CERAFILr) for TV/VCR · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · p34
TPSKA · · · · · · · · · · Chip Ceramic Traps · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · p45
74
Global Locations
For details please visit www.murata.com
Note
1 Export Control
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law”
of Japan, the export license specified by the law
is required for export.
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
1
Aircraft equipment
2
Aerospace equipment
3
Undersea equipment
4
Power plant equipment
5
Medical equipment
6
Transportation equipment (vehicles, trains,
ships, etc.)
7
Traffic signal equipment
8
Disaster prevention / crime prevention
equipment
9
Data-processing equipment
10
Application of similar complexity and/or
reliability requirements to the applications
listed above
Murata Manufacturing Co., Ltd.
www.murata.com
3 Product specifications in this catalog are as of July
2012. They are subject to change or our products
in it may be discontinued without advance notice.
Please check with our sales representatives
or product engineers before ordering. If there
are any questions, please contact our sales
representatives or product engineers.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
5 This catalog has only typical specifications.
Therefore, please approve our product
specifications or transact the approval sheet
for product specifications before ordering.
6 Please note that unless otherwise specified, we
shall assume no responsibility whatsoever for any
conflict or dispute that may occur in connection
with the effect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the effect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
